diff options
author | Arnd Bergmann <arnd@arndb.de> | 2023-05-26 15:53:43 +0200 |
---|---|---|
committer | Arnd Bergmann <arnd@arndb.de> | 2023-05-26 15:53:46 +0200 |
commit | 0b47a62ea65e1836945f09eafd99d0dd2bf92093 (patch) | |
tree | aeb1adfc08c6ea0449bddb9817cc62221d245698 /arch/arm/mach-omap2/pdata-quirks.c | |
parent | 88813f05b834756dfcadb7fbd7bf8f21e69b7811 (diff) | |
parent | 8e0285ab95a9baf374f2c13eb152221c8ecb3f28 (diff) |
Merge tag 'gpio-omap-descriptors-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio into soc/arm
This removes all usage of global GPIO numbers from
arch/arm/mach-omap[12].
The patches have been reviewed and tested by everyone
who showed interest which was one person that tested
on OSK1 and Nokia 770, and we smoked out the bugs and
also addressed all review comments.
Any remaining problems can certainly be fixed in-tree.
* tag 'gpio-omap-descriptors-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
ARM/musb: omap2: Remove global GPIO numbers from TUSB6010
ARM: omap2: Rewrite WLAN quirk to use GPIO descriptors
ARM: omap2: Get USB hub reset GPIO from descriptor
ARM/gpio: Push OMAP2 quirk down into TWL4030 driver
ARM: omap1: Exorcise the legacy GPIO header
ARM: omap1: Make serial wakeup GPIOs use descriptors
ARM: omap1: Fix up the Nokia 770 board device IRQs
ARM/mmc: Convert old mmci-omap to GPIO descriptors
Input: ads7846 - Convert to use software nodes
ARM: omap1: Remove reliance on GPIO numbers from SX1
ARM: omap1: Remove reliance on GPIO numbers from PalmTE
ARM: omap1: Drop header on AMS Delta
ARM/mfd/gpio: Fixup TPS65010 regression on OMAP1 OSK1
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Diffstat (limited to 'arch/arm/mach-omap2/pdata-quirks.c')
-rw-r--r-- | arch/arm/mach-omap2/pdata-quirks.c | 130 |
1 files changed, 65 insertions, 65 deletions
diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c index 04208cc52784..c1c0121f478d 100644 --- a/arch/arm/mach-omap2/pdata-quirks.c +++ b/arch/arm/mach-omap2/pdata-quirks.c @@ -6,8 +6,8 @@ */ #include <linux/clk.h> #include <linux/davinci_emac.h> +#include <linux/gpio/machine.h> #include <linux/gpio/consumer.h> -#include <linux/gpio.h> #include <linux/init.h> #include <linux/kernel.h> #include <linux/of_platform.h> @@ -41,7 +41,6 @@ struct pdata_init { }; static struct of_dev_auxdata omap_auxdata_lookup[]; -static struct twl4030_gpio_platform_data twl_gpio_auxdata; #ifdef CONFIG_MACH_NOKIA_N8X0 static void __init omap2420_n8x0_legacy_init(void) @@ -98,52 +97,43 @@ static struct iommu_platform_data omap3_iommu_isp_pdata = { }; #endif -static int omap3_sbc_t3730_twl_callback(struct device *dev, - unsigned gpio, - unsigned ngpio) +static void __init omap3_sbc_t3x_usb_hub_init(char *hub_name, int idx) { - int res; + struct gpio_desc *d; - res = gpio_request_one(gpio + 2, GPIOF_OUT_INIT_HIGH, - "wlan pwr"); - if (res) - return res; - - gpiod_export(gpio_to_desc(gpio), 0); - - return 0; -} - -static void __init omap3_sbc_t3x_usb_hub_init(int gpio, char *hub_name) -{ - int err = gpio_request_one(gpio, GPIOF_OUT_INIT_LOW, hub_name); - - if (err) { - pr_err("SBC-T3x: %s reset gpio request failed: %d\n", - hub_name, err); + /* This asserts the RESET line (reverse polarity) */ + d = gpiod_get_index(NULL, "reset", idx, GPIOD_OUT_HIGH); + if (IS_ERR(d)) { + pr_err("Unable to get T3x USB reset GPIO descriptor\n"); return; } - - gpiod_export(gpio_to_desc(gpio), 0); - + gpiod_set_consumer_name(d, hub_name); + gpiod_export(d, 0); udelay(10); - gpio_set_value(gpio, 1); + /* De-assert RESET */ + gpiod_set_value(d, 0); msleep(1); } -static void __init omap3_sbc_t3730_twl_init(void) -{ - twl_gpio_auxdata.setup = omap3_sbc_t3730_twl_callback; -} +static struct gpiod_lookup_table omap3_sbc_t3x_usb_gpio_table = { + .dev_id = NULL, + .table = { + GPIO_LOOKUP_IDX("gpio-160-175", 7, "reset", 0, + GPIO_ACTIVE_LOW), + { } + }, +}; static void __init omap3_sbc_t3730_legacy_init(void) { - omap3_sbc_t3x_usb_hub_init(167, "sb-t35 usb hub"); + gpiod_add_lookup_table(&omap3_sbc_t3x_usb_gpio_table); + omap3_sbc_t3x_usb_hub_init("sb-t35 usb hub", 0); } static void __init omap3_sbc_t3530_legacy_init(void) { - omap3_sbc_t3x_usb_hub_init(167, "sb-t35 usb hub"); + gpiod_add_lookup_table(&omap3_sbc_t3x_usb_gpio_table); + omap3_sbc_t3x_usb_hub_init("sb-t35 usb hub", 0); } static void __init omap3_evm_legacy_init(void) @@ -187,31 +177,59 @@ static void __init am35xx_emac_reset(void) omap_ctrl_readl(AM35XX_CONTROL_IP_SW_RESET); /* OCP barrier */ } -static struct gpio cm_t3517_wlan_gpios[] __initdata = { - { 56, GPIOF_OUT_INIT_HIGH, "wlan pwr" }, - { 4, GPIOF_OUT_INIT_HIGH, "xcvr noe" }, +static struct gpiod_lookup_table cm_t3517_wlan_gpio_table = { + .dev_id = NULL, + .table = { + GPIO_LOOKUP("gpio-48-53", 8, "power", + GPIO_ACTIVE_HIGH), + GPIO_LOOKUP("gpio-0-15", 4, "noe", + GPIO_ACTIVE_HIGH), + { } + }, }; static void __init omap3_sbc_t3517_wifi_init(void) { - int err = gpio_request_array(cm_t3517_wlan_gpios, - ARRAY_SIZE(cm_t3517_wlan_gpios)); - if (err) { - pr_err("SBC-T3517: wl12xx gpios request failed: %d\n", err); - return; - } + struct gpio_desc *d; + + gpiod_add_lookup_table(&cm_t3517_wlan_gpio_table); - gpiod_export(gpio_to_desc(cm_t3517_wlan_gpios[0].gpio), 0); - gpiod_export(gpio_to_desc(cm_t3517_wlan_gpios[1].gpio), 0); + /* This asserts the RESET line (reverse polarity) */ + d = gpiod_get(NULL, "power", GPIOD_OUT_HIGH); + if (IS_ERR(d)) { + pr_err("Unable to get CM T3517 WLAN power GPIO descriptor\n"); + } else { + gpiod_set_consumer_name(d, "wlan pwr"); + gpiod_export(d, 0); + } + d = gpiod_get(NULL, "noe", GPIOD_OUT_HIGH); + if (IS_ERR(d)) { + pr_err("Unable to get CM T3517 WLAN XCVR NOE GPIO descriptor\n"); + } else { + gpiod_set_consumer_name(d, "xcvr noe"); + gpiod_export(d, 0); + } msleep(100); - gpio_set_value(cm_t3517_wlan_gpios[1].gpio, 0); + gpiod_set_value(d, 0); } +static struct gpiod_lookup_table omap3_sbc_t3517_usb_gpio_table = { + .dev_id = NULL, + .table = { + GPIO_LOOKUP_IDX("gpio-144-159", 8, "reset", 0, + GPIO_ACTIVE_LOW), + GPIO_LOOKUP_IDX("gpio-96-111", 2, "reset", 1, + GPIO_ACTIVE_LOW), + { } + }, +}; + static void __init omap3_sbc_t3517_legacy_init(void) { - omap3_sbc_t3x_usb_hub_init(152, "cm-t3517 usb hub"); - omap3_sbc_t3x_usb_hub_init(98, "sb-t35 usb hub"); + gpiod_add_lookup_table(&omap3_sbc_t3517_usb_gpio_table); + omap3_sbc_t3x_usb_hub_init("cm-t3517 usb hub", 0); + omap3_sbc_t3x_usb_hub_init("sb-t35 usb hub", 1); am35xx_emac_reset(); hsmmc2_internal_input_clk(); omap3_sbc_t3517_wifi_init(); @@ -393,21 +411,6 @@ static struct ti_prm_platform_data ti_prm_pdata = { .clkdm_lookup = clkdm_lookup, }; -/* - * GPIOs for TWL are initialized by the I2C bus and need custom - * handing until DSS has device tree bindings. - */ -void omap_auxdata_legacy_init(struct device *dev) -{ - if (dev->platform_data) - return; - - if (strcmp("twl4030-gpio", dev_name(dev))) - return; - - dev->platform_data = &twl_gpio_auxdata; -} - #if defined(CONFIG_ARCH_OMAP3) && IS_ENABLED(CONFIG_SND_SOC_OMAP_MCBSP) static struct omap_mcbsp_platform_data mcbsp_pdata; static void __init omap3_mcbsp_init(void) @@ -428,9 +431,6 @@ static struct pdata_init auxdata_quirks[] __initdata = { { "nokia,n810", omap2420_n8x0_legacy_init, }, { "nokia,n810-wimax", omap2420_n8x0_legacy_init, }, #endif -#ifdef CONFIG_ARCH_OMAP3 - { "compulab,omap3-sbc-t3730", omap3_sbc_t3730_twl_init, }, -#endif { /* sentinel */ }, }; |