diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2024-07-16 11:43:51 -0700 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2024-07-16 11:43:51 -0700 |
| commit | e3950967f6e6b74a3606739ec50ed19f3398c7d8 (patch) | |
| tree | 7e71d022167eca97b96ca3d675a1cbee55b06889 /arch/arm | |
| parent | cc0f7c3f97bc6e888bf4be28a9da9dbd3735d2b4 (diff) | |
| parent | 48d2245586452b8279a854970ce82f43477669d3 (diff) | |
Merge tag 'soc-dt-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC dt updates from Arnd Bergmann:
"The devicetree updates are fairly well spread out across platforms,
with Qualcomm making up about a third of the total.
There are three new SoCs in existing product families this:
- NXP i.MX95 is a variant of i.MX93, now with six Cortex-A55 cores
instead of just two as well as a GPU and more high-speed I/O
devices.
- Qualcomm QCS8550 is a variant of SM8550 for IOT devices
- Airoha EN7581 is a 10G-PON network chip and related to the MT7981
Wireless router chip from its parent Mediatek.
In total there are 58 new machines, including four riscv boards and
eight for 32-bit arm.
The most exciting new addition is probably a pair of laptops based on
the Qualcomm x1e80100 (Snapdragon X1 Elite) chip, the Asus Vivobook
S15 and the Lenovo Yoga Slim7x.
Other noteworthy new additions are:
- A total of 20 Qualcomm based machines, mostly Android devices from
Samsung, Motorola and LG, as well as a wireless router and some
reference designs
- Six NXP i.MX based machines, mostly industrial boards along with
some reference designs
- Mediatek sees some interesting Filogic based routers including the
"OpenWRT One", a few new Chromebooks as well as single-board
computers.
- Four machines from Solidrun based on Marvell cn913x, replacing the
older Armada 8000 based counterparts
- The four Amlogic machines are all set top boxes or reference
designs for them
- The nine new Rockchips machines are mostly single-board computers
including some interesting ones based on the rk3588 chip like the
ROCK 5 ITX board and the CM3588 with its four NVMe slots
- The RISC-V boards are all single-board computers based on Starfive
JH7110, Microchip MPFS and Allwinner D1, which all had similar
boards already
There are also a lot of updates to already supported machines, notably
for the TI K3, Rockchips, Freescale and of course Qualcomm platforms"
* tag 'soc-dt-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (846 commits)
arm64: dts: allwinner: h616: add crypto engine node
riscv: dts: add clock generator for Sophgo SG2042 SoC
arm64: dts: rockchip: Add Xunlong Orange Pi 3B
dt-bindings: arm: rockchip: Add Xunlong Orange Pi 3B
arm64: dts: rockchip: Add Radxa ROCK 3B
dt-bindings: arm: rockchip: Add Radxa ROCK 3B
mailmap: Update Luca Weiss's email address
ARM: dts: ixp4xx: nslu2: beeper uses PWM
arm64: dts: rockchip: add ROCK 5 ITX board
dt-bindings: arm: rockchip: Add ROCK 5 ITX board
arm64: dts: rockchip: Add dma-names to uart1 on Pine64 rk3566 devices
arm64: dts: rockchip: Add avdd supplies to hdmi on rock64
arm64: dts: qcom: msm8916-lg-c50: add initial dts for LG Leon LTE
arm64: dts: qcom: msm8916-lg-m216: Add initial device tree
dt-bindings: arm: qcom: Add msm8916 based LG devices
ARM: dts: qcom: msm8960: correct memory base
arm64: dts: qcom: ipq9574: Add icc provider ability to gcc
dt-bindings: interconnect: Add Qualcomm IPQ9574 support
arm64: dts: qcom: sm8150: Add video clock controller node
arm64: dts: qcom: pm6150: Add vibrator
...
Diffstat (limited to 'arch/arm')
186 files changed, 4567 insertions, 908 deletions
diff --git a/arch/arm/boot/dts/allwinner/Makefile b/arch/arm/boot/dts/allwinner/Makefile index 4247f19b1adc..cd0d044882cf 100644 --- a/arch/arm/boot/dts/allwinner/Makefile +++ b/arch/arm/boot/dts/allwinner/Makefile @@ -261,68 +261,6 @@ dtb-$(CONFIG_MACH_SUN8I) += \ sun8i-v3s-licheepi-zero.dtb \ sun8i-v3s-licheepi-zero-dock.dtb \ sun8i-v40-bananapi-m2-berry.dtb -dtb-$(CONFIG_MACH_SUN8I) += \ - sun8i-a23-evb.dtb \ - sun8i-a23-gt90h-v4.dtb \ - sun8i-a23-inet86dz.dtb \ - sun8i-a23-ippo-q8h-v5.dtb \ - sun8i-a23-ippo-q8h-v1.2.dtb \ - sun8i-a23-polaroid-mid2407pxe03.dtb \ - sun8i-a23-polaroid-mid2809pxe04.dtb \ - sun8i-a23-q8-tablet.dtb \ - sun8i-a33-et-q8-v1.6.dtb \ - sun8i-a33-ga10h-v1.1.dtb \ - sun8i-a33-inet-d978-rev2.dtb \ - sun8i-a33-ippo-q8h-v1.2.dtb \ - sun8i-a33-olinuxino.dtb \ - sun8i-a33-q8-tablet.dtb \ - sun8i-a33-sinlinx-sina33.dtb \ - sun8i-a83t-allwinner-h8homlet-v2.dtb \ - sun8i-a83t-bananapi-m3.dtb \ - sun8i-a83t-cubietruck-plus.dtb \ - sun8i-a83t-tbs-a711.dtb \ - sun8i-h2-plus-bananapi-m2-zero.dtb \ - sun8i-h2-plus-libretech-all-h3-cc.dtb \ - sun8i-h2-plus-orangepi-r1.dtb \ - sun8i-h2-plus-orangepi-zero.dtb \ - sun8i-h3-bananapi-m2-plus.dtb \ - sun8i-h3-bananapi-m2-plus-v1.2.dtb \ - sun8i-h3-beelink-x2.dtb \ - sun8i-h3-libretech-all-h3-cc.dtb \ - sun8i-h3-mapleboard-mp130.dtb \ - sun8i-h3-nanopi-duo2.dtb \ - sun8i-h3-nanopi-m1.dtb\ - \ - sun8i-h3-nanopi-m1-plus.dtb \ - sun8i-h3-nanopi-neo.dtb \ - sun8i-h3-nanopi-neo-air.dtb \ - sun8i-h3-nanopi-r1.dtb \ - sun8i-h3-orangepi-2.dtb \ - sun8i-h3-orangepi-lite.dtb \ - sun8i-h3-orangepi-one.dtb \ - sun8i-h3-orangepi-pc.dtb \ - sun8i-h3-orangepi-pc-plus.dtb \ - sun8i-h3-orangepi-plus.dtb \ - sun8i-h3-orangepi-plus2e.dtb \ - sun8i-h3-orangepi-zero-plus2.dtb \ - sun8i-h3-rervision-dvk.dtb \ - sun8i-h3-zeropi.dtb \ - sun8i-h3-emlid-neutis-n5h3-devboard.dtb \ - sun8i-r16-bananapi-m2m.dtb \ - sun8i-r16-nintendo-nes-classic.dtb \ - sun8i-r16-nintendo-super-nes-classic.dtb \ - sun8i-r16-parrot.dtb \ - sun8i-r40-bananapi-m2-ultra.dtb \ - sun8i-r40-oka40i-c.dtb \ - sun8i-s3-elimo-initium.dtb \ - sun8i-s3-lichee-zero-plus.dtb \ - sun8i-s3-pinecube.dtb \ - sun8i-t113s-mangopi-mq-r-t113.dtb \ - sun8i-t3-cqa3t-bv3.dtb \ - sun8i-v3-sl631-imx179.dtb \ - sun8i-v3s-licheepi-zero.dtb \ - sun8i-v3s-licheepi-zero-dock.dtb \ - sun8i-v40-bananapi-m2-berry.dtb dtb-$(CONFIG_MACH_SUN9I) += \ sun9i-a80-optimus.dtb \ sun9i-a80-cubieboard4.dtb diff --git a/arch/arm/boot/dts/arm/arm-realview-eb-bbrevd.dtsi b/arch/arm/boot/dts/arm/arm-realview-eb-bbrevd.dtsi index a79e1d1d30a7..7f62aef9ca8a 100644 --- a/arch/arm/boot/dts/arm/arm-realview-eb-bbrevd.dtsi +++ b/arch/arm/boot/dts/arm/arm-realview-eb-bbrevd.dtsi @@ -22,7 +22,7 @@ / { /* Introduce a fixed regulator for the new ethernet controller */ - veth: fixedregulator@0 { + veth: regulator-veth { compatible = "regulator-fixed"; regulator-name = "veth"; regulator-min-microvolt = <3300000>; diff --git a/arch/arm/boot/dts/arm/arm-realview-eb.dtsi b/arch/arm/boot/dts/arm/arm-realview-eb.dtsi index fbb2258b451f..16f784da5a55 100644 --- a/arch/arm/boot/dts/arm/arm-realview-eb.dtsi +++ b/arch/arm/boot/dts/arm/arm-realview-eb.dtsi @@ -45,7 +45,7 @@ }; /* The voltage to the MMC card is hardwired at 3.3V */ - vmmc: fixedregulator@0 { + vmmc: regulator-vmmc { compatible = "regulator-fixed"; regulator-name = "vmmc"; regulator-min-microvolt = <3300000>; @@ -53,13 +53,13 @@ regulator-boot-on; }; - xtal24mhz: xtal24mhz@24M { + xtal24mhz: mclk: kmiclk: sspclk: uartclk: wdogclk: clock-24000000 { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24000000>; }; - timclk: timclk@1M { + timclk: clock-1000000 { #clock-cells = <0>; compatible = "fixed-factor-clock"; clock-div = <24>; @@ -67,48 +67,8 @@ clocks = <&xtal24mhz>; }; - mclk: mclk@24M { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <1>; - clock-mult = <1>; - clocks = <&xtal24mhz>; - }; - - kmiclk: kmiclk@24M { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <1>; - clock-mult = <1>; - clocks = <&xtal24mhz>; - }; - - sspclk: sspclk@24M { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <1>; - clock-mult = <1>; - clocks = <&xtal24mhz>; - }; - - uartclk: uartclk@24M { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <1>; - clock-mult = <1>; - clocks = <&xtal24mhz>; - }; - - wdogclk: wdogclk@24M { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <1>; - clock-mult = <1>; - clocks = <&xtal24mhz>; - }; - /* FIXME: this actually hangs off the PLL clocks */ - pclk: pclk@0 { + pclk: clock-pclk { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <0>; diff --git a/arch/arm/boot/dts/arm/arm-realview-pb1176.dts b/arch/arm/boot/dts/arm/arm-realview-pb1176.dts index d99bac02232b..b9b10cbd65aa 100644 --- a/arch/arm/boot/dts/arm/arm-realview-pb1176.dts +++ b/arch/arm/boot/dts/arm/arm-realview-pb1176.dts @@ -63,13 +63,13 @@ regulator-boot-on; }; - xtal24mhz: xtal24mhz@24M { + xtal24mhz: mclk: kmiclk: sspclk: uartclk: clock-24000000 { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24000000>; }; - timclk: timclk@1M { + timclk: clock-1000000 { #clock-cells = <0>; compatible = "fixed-factor-clock"; clock-div = <24>; @@ -77,40 +77,8 @@ clocks = <&xtal24mhz>; }; - mclk: mclk@24M { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <1>; - clock-mult = <1>; - clocks = <&xtal24mhz>; - }; - - kmiclk: kmiclk@24M { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <1>; - clock-mult = <1>; - clocks = <&xtal24mhz>; - }; - - sspclk: sspclk@24M { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <1>; - clock-mult = <1>; - clocks = <&xtal24mhz>; - }; - - uartclk: uartclk@24M { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <1>; - clock-mult = <1>; - clocks = <&xtal24mhz>; - }; - /* FIXME: this actually hangs off the PLL clocks */ - pclk: pclk@0 { + pclk: clock-pclk { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <0>; diff --git a/arch/arm/boot/dts/arm/arm-realview-pb11mp.dts b/arch/arm/boot/dts/arm/arm-realview-pb11mp.dts index 89103d54ecc1..ce35748f3d25 100644 --- a/arch/arm/boot/dts/arm/arm-realview-pb11mp.dts +++ b/arch/arm/boot/dts/arm/arm-realview-pb11mp.dts @@ -163,19 +163,19 @@ regulator-boot-on; }; - xtal24mhz: xtal24mhz@24M { + xtal24mhz: mclk: kmiclk: sspclk: uartclk: wdogclk: clock-24000000 { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24000000>; }; - refclk32khz: refclk32khz { + refclk32khz: clock-32768 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <32768>; }; - timclk: timclk@1M { + timclk: clock-1000000 { #clock-cells = <0>; compatible = "fixed-factor-clock"; clock-div = <24>; @@ -183,48 +183,8 @@ clocks = <&xtal24mhz>; }; - mclk: mclk@24M { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <1>; - clock-mult = <1>; - clocks = <&xtal24mhz>; - }; - - kmiclk: kmiclk@24M { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <1>; - clock-mult = <1>; - clocks = <&xtal24mhz>; - }; - - sspclk: sspclk@24M { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <1>; - clock-mult = <1>; - clocks = <&xtal24mhz>; - }; - - uartclk: uartclk@24M { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <1>; - clock-mult = <1>; - clocks = <&xtal24mhz>; - }; - - wdogclk: wdogclk@24M { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <1>; - clock-mult = <1>; - clocks = <&xtal24mhz>; - }; - /* FIXME: this actually hangs off the PLL clocks */ - pclk: pclk@0 { + pclk: clock-pclk { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <0>; diff --git a/arch/arm/boot/dts/arm/arm-realview-pbx.dtsi b/arch/arm/boot/dts/arm/arm-realview-pbx.dtsi index ec1507c5147c..e625403a9456 100644 --- a/arch/arm/boot/dts/arm/arm-realview-pbx.dtsi +++ b/arch/arm/boot/dts/arm/arm-realview-pbx.dtsi @@ -62,19 +62,19 @@ regulator-boot-on; }; - xtal24mhz: xtal24mhz@24M { + xtal24mhz: mclk: kmiclk: sspclk: uartclk: wdogclk: clock-24000000 { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24000000>; }; - refclk32khz: refclk32khz { + refclk32khz: clock-32768 { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <32768>; }; - timclk: timclk@1M { + timclk: clock-1000000 { #clock-cells = <0>; compatible = "fixed-factor-clock"; clock-div = <24>; @@ -82,48 +82,8 @@ clocks = <&xtal24mhz>; }; - mclk: mclk@24M { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <1>; - clock-mult = <1>; - clocks = <&xtal24mhz>; - }; - - kmiclk: kmiclk@24M { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <1>; - clock-mult = <1>; - clocks = <&xtal24mhz>; - }; - - sspclk: sspclk@24M { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <1>; - clock-mult = <1>; - clocks = <&xtal24mhz>; - }; - - uartclk: uartclk@24M { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <1>; - clock-mult = <1>; - clocks = <&xtal24mhz>; - }; - - wdogclk: wdogclk@24M { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <1>; - clock-mult = <1>; - clocks = <&xtal24mhz>; - }; - /* FIXME: this actually hangs off the PLL clocks */ - pclk: pclk@0 { + pclk: clock-pclk { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <0>; diff --git a/arch/arm/boot/dts/arm/integratorap-im-pd1.dts b/arch/arm/boot/dts/arm/integratorap-im-pd1.dts index 367850ea0912..db13e09f2fab 100644 --- a/arch/arm/boot/dts/arm/integratorap-im-pd1.dts +++ b/arch/arm/boot/dts/arm/integratorap-im-pd1.dts @@ -54,7 +54,7 @@ }; /* Also used for the Smart Card Interface SCI */ - impd1_uartclk: clock@1_4 { + impd1_uartclk: clock-uart { compatible = "fixed-factor-clock"; #clock-cells = <0>; clock-div = <4>; @@ -64,7 +64,7 @@ }; /* For the SSP the clock is divided by 64 */ - impd1_sspclk: clock@1_64 { + impd1_sspclk: clock-ssp { compatible = "fixed-factor-clock"; #clock-cells = <0>; clock-div = <64>; diff --git a/arch/arm/boot/dts/arm/integratorap.dts b/arch/arm/boot/dts/arm/integratorap.dts index d9927d3181dc..9b6a1dbaf265 100644 --- a/arch/arm/boot/dts/arm/integratorap.dts +++ b/arch/arm/boot/dts/arm/integratorap.dts @@ -57,22 +57,14 @@ }; /* 24 MHz chrystal on the Integrator/AP development board */ - xtal24mhz: xtal24mhz@24M { + xtal24mhz: pclk: clock-24000000 { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24000000>; }; - pclk: pclk@0 { - #clock-cells = <0>; - compatible = "fixed-factor-clock"; - clock-div = <1>; - clock-mult = <1>; - clocks = <&xtal24mhz>; - }; - /* The UART clock is 14.74 MHz divided by an ICS525 */ - uartclk: uartclk@14.74M { + uartclk: clock-14745600 { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <14745600>; @@ -81,7 +73,7 @@ core-module@10000000 { /* 24 MHz chrystal on the core module */ - cm24mhz: cm24mhz@24M { + cm24mhz: clock-24000000 { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24000000>; diff --git a/arch/arm/boot/dts/arm/integratorcp.dts b/arch/arm/boot/dts/arm/integratorcp.dts index c011333eb165..8ad1a8957ace 100644 --- a/arch/arm/boot/dts/arm/integratorcp.dts +++ b/arch/arm/boot/dts/arm/integratorcp.dts @@ -47,14 +47,14 @@ */ /* The codec chrystal operates at 24.576 MHz */ - xtal_codec: xtal24.576@24.576M { + xtal_codec: clock-24576000 { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24576000>; }; /* The chrystal is divided by 2 by the codec for the AACI bit clock */ - aaci_bitclk: aaci_bitclk@12.288M { + aaci_bitclk: clock-12288000 { #clock-cells = <0>; compatible = "fixed-factor-clock"; clock-div = <2>; @@ -63,21 +63,21 @@ }; /* This is a 25MHz chrystal on the base board */ - xtal25mhz: xtal25mhz@25M { + xtal25mhz: clock-25000000 { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <25000000>; }; /* The UART clock is 14.74 MHz divided from 25MHz by an ICS525 */ - uartclk: uartclk@14.74M { + uartclk: clock-14745600 { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <14745600>; }; /* Actually sysclk I think */ - pclk: pclk@0 { + pclk: clock-pclk { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <0>; @@ -85,7 +85,7 @@ core-module@10000000 { /* 24 MHz chrystal on the core module */ - cm24mhz: cm24mhz@24M { + cm24mhz: clock-24000000 { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24000000>; @@ -131,7 +131,7 @@ }; /* The timer clock is the 24 MHz oscillator divided to 1MHz */ - timclk: timclk@1M { + timclk: clock-1000000 { #clock-cells = <0>; compatible = "fixed-factor-clock"; clock-div = <24>; diff --git a/arch/arm/boot/dts/arm/mps2.dtsi b/arch/arm/boot/dts/arm/mps2.dtsi index ce308820765b..e240bc8aa605 100644 --- a/arch/arm/boot/dts/arm/mps2.dtsi +++ b/arch/arm/boot/dts/arm/mps2.dtsi @@ -48,37 +48,37 @@ #address-cells = <1>; #size-cells = <1>; - oscclk0: clk-osc0 { + oscclk0: clock-50000000 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <50000000>; }; - oscclk1: clk-osc1 { + oscclk1: clock-24576000 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <24576000>; }; - oscclk2: clk-osc2 { + oscclk2: clock-25000000 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <25000000>; }; - cfgclk: clk-cfg { + cfgclk: clock-5000000 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <5000000>; }; - spicfgclk: clk-spicfg { + spicfgclk: clock-75000000 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <75000000>; }; - sysclk: clk-sys { + sysclk: spiclcd: spicon: i2cclcd: i2caud: clock-sys { compatible = "fixed-factor-clock"; clocks = <&oscclk0>; #clock-cells = <0>; @@ -86,7 +86,7 @@ clock-mult = <1>; }; - audmclk: clk-audm { + audmclk: clk-12388000 { compatible = "fixed-factor-clock"; clocks = <&oscclk1>; #clock-cells = <0>; @@ -94,7 +94,7 @@ clock-mult = <1>; }; - audsclk: clk-auds { + audsclk: clk-3072000 { compatible = "fixed-factor-clock"; clocks = <&oscclk1>; #clock-cells = <0>; @@ -102,38 +102,6 @@ clock-mult = <1>; }; - spiclcd: clk-cpiclcd { - compatible = "fixed-factor-clock"; - clocks = <&oscclk0>; - #clock-cells = <0>; - clock-div = <2>; - clock-mult = <1>; - }; - - spicon: clk-spicon { - compatible = "fixed-factor-clock"; - clocks = <&oscclk0>; - #clock-cells = <0>; - clock-div = <2>; - clock-mult = <1>; - }; - - i2cclcd: clk-i2cclcd { - compatible = "fixed-factor-clock"; - clocks = <&oscclk0>; - #clock-cells = <0>; - clock-div = <2>; - clock-mult = <1>; - }; - - i2caud: clk-i2caud { - compatible = "fixed-factor-clock"; - clocks = <&oscclk0>; - #clock-cells = <0>; - clock-div = <2>; - clock-mult = <1>; - }; - soc { compatible = "simple-bus"; ranges; diff --git a/arch/arm/boot/dts/arm/versatile-ab.dts b/arch/arm/boot/dts/arm/versatile-ab.dts index de45aa99e260..6fe6b49f5d8e 100644 --- a/arch/arm/boot/dts/arm/versatile-ab.dts +++ b/arch/arm/boot/dts/arm/versatile-ab.dts @@ -24,7 +24,7 @@ reg = <0x0 0x08000000>; }; - xtal24mhz: xtal24mhz@24M { + xtal24mhz: clock-24000000 { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <24000000>; @@ -142,14 +142,14 @@ }; /* OSC1 on AB, OSC4 on PB */ - osc1: cm_aux_osc@24M { + osc1: clock-osc { #clock-cells = <0>; compatible = "arm,versatile-cm-auxosc"; clocks = <&xtal24mhz>; }; /* The timer clock is the 24 MHz oscillator divided to 1MHz */ - timclk: timclk@1M { + timclk: clock-1000000 { #clock-cells = <0>; compatible = "fixed-factor-clock"; clock-div = <24>; @@ -157,7 +157,7 @@ clocks = <&xtal24mhz>; }; - pclk: pclk@24M { + pclk: clock-24000000 { #clock-cells = <0>; compatible = "fixed-factor-clock"; clock-div = <1>; diff --git a/arch/arm/boot/dts/arm/vexpress-v2m-rs1.dtsi b/arch/arm/boot/dts/arm/vexpress-v2m-rs1.dtsi index 8af4b77fe655..158b3923eae3 100644 --- a/arch/arm/boot/dts/arm/vexpress-v2m-rs1.dtsi +++ b/arch/arm/boot/dts/arm/vexpress-v2m-rs1.dtsi @@ -20,7 +20,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> / { - v2m_fixed_3v3: fixed-regulator-0 { + v2m_fixed_3v3: regulator-3v3 { compatible = "regulator-fixed"; regulator-name = "3V3"; regulator-min-microvolt = <3300000>; @@ -28,21 +28,21 @@ regulator-always-on; }; - v2m_clk24mhz: clk24mhz { + v2m_clk24mhz: clock-24000000 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <24000000>; clock-output-names = "v2m:clk24mhz"; }; - v2m_refclk1mhz: refclk1mhz { + v2m_refclk1mhz: clock-1000000 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <1000000>; clock-output-names = "v2m:refclk1mhz"; }; - v2m_refclk32khz: refclk32khz { + v2m_refclk32khz: clock-32768 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <32768>; diff --git a/arch/arm/boot/dts/arm/vexpress-v2m.dtsi b/arch/arm/boot/dts/arm/vexpress-v2m.dtsi index c5e92f6d2fcd..be03f2a8a57a 100644 --- a/arch/arm/boot/dts/arm/vexpress-v2m.dtsi +++ b/arch/arm/boot/dts/arm/vexpress-v2m.dtsi @@ -351,7 +351,7 @@ }; }; - v2m_fixed_3v3: fixed-regulator-0 { + v2m_fixed_3v3: regulator-3v3 { compatible = "regulator-fixed"; regulator-name = "3V3"; regulator-min-microvolt = <3300000>; @@ -359,21 +359,21 @@ regulator-always-on; }; - v2m_clk24mhz: clk24mhz { + v2m_clk24mhz: clock-24000000 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <24000000>; clock-output-names = "v2m:clk24mhz"; }; - v2m_refclk1mhz: refclk1mhz { + v2m_refclk1mhz: clock-1000000 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <1000000>; clock-output-names = "v2m:refclk1mhz"; }; - v2m_refclk32khz: refclk32khz { + v2m_refclk32khz: clock-32768 { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <32768>; @@ -436,7 +436,7 @@ compatible = "arm,vexpress,config-bus"; arm,vexpress,config-bridge = <&v2m_sysreg>; - oscclk0 { + clock-controller-0 { /* MCC static memory clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 0>; @@ -445,7 +445,7 @@ clock-output-names = "v2m:oscclk0"; }; - v2m_oscclk1: oscclk1 { + v2m_oscclk1: clock-controller-1 { /* CLCD clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 1>; @@ -454,7 +454,7 @@ clock-output-names = "v2m:oscclk1"; }; - v2m_oscclk2: oscclk2 { + v2m_oscclk2: clock-controller-2 { /* IO FPGA peripheral clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 2>; @@ -463,7 +463,7 @@ clock-output-names = "v2m:oscclk2"; }; - volt-vio { + regulator-vio { /* Logic level voltage */ compatible = "arm,vexpress-volt"; arm,vexpress-sysreg,func = <2 0>; diff --git a/arch/arm/boot/dts/arm/vexpress-v2p-ca15-tc1.dts b/arch/arm/boot/dts/arm/vexpress-v2p-ca15-tc1.dts index 679537e17ff5..5a91e936edef 100644 --- a/arch/arm/boot/dts/arm/vexpress-v2p-ca15-tc1.dts +++ b/arch/arm/boot/dts/arm/vexpress-v2p-ca15-tc1.dts @@ -142,7 +142,7 @@ compatible = "arm,vexpress,config-bus"; arm,vexpress,config-bridge = <&v2m_sysreg>; - oscclk0 { + clock-controller-0 { /* CPU PLL reference clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 0>; @@ -151,7 +151,7 @@ clock-output-names = "oscclk0"; }; - oscclk4 { + clock-controller-4 { /* Multiplexed AXI master clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 4>; @@ -160,7 +160,7 @@ clock-output-names = "oscclk4"; }; - hdlcd_clk: oscclk5 { + hdlcd_clk: clock-controller-5 { /* HDLCD PLL reference clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 5>; @@ -169,7 +169,7 @@ clock-output-names = "oscclk5"; }; - smbclk: oscclk6 { + smbclk: clock-controller-6 { /* SMB clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 6>; @@ -178,7 +178,7 @@ clock-output-names = "oscclk6"; }; - sys_pll: oscclk7 { + sys_pll: clock-controller-7 { /* SYS PLL reference clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 7>; @@ -187,7 +187,7 @@ clock-output-names = "oscclk7"; }; - oscclk8 { + clock-controller-8 { /* DDR2 PLL reference clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 8>; @@ -196,7 +196,7 @@ clock-output-names = "oscclk8"; }; - volt-cores { + regulator-cores { /* CPU core voltage */ compatible = "arm,vexpress-volt"; arm,vexpress-sysreg,func = <2 0>; diff --git a/arch/arm/boot/dts/arm/vexpress-v2p-ca15_a7.dts b/arch/arm/boot/dts/arm/vexpress-v2p-ca15_a7.dts index 511e87cc2bc5..6ef23c53d2d8 100644 --- a/arch/arm/boot/dts/arm/vexpress-v2p-ca15_a7.dts +++ b/arch/arm/boot/dts/arm/vexpress-v2p-ca15_a7.dts @@ -253,7 +253,7 @@ compatible = "arm,vexpress,config-bus"; arm,vexpress,config-bridge = <&v2m_sysreg>; - oscclk0 { + clock-controller-0 { /* A15 PLL 0 reference clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 0>; @@ -262,7 +262,7 @@ clock-output-names = "oscclk0"; }; - oscclk1 { + clock-controller-1 { /* A15 PLL 1 reference clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 1>; @@ -271,7 +271,7 @@ clock-output-names = "oscclk1"; }; - oscclk2 { + clock-controller-2 { /* A7 PLL 0 reference clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 2>; @@ -280,7 +280,7 @@ clock-output-names = "oscclk2"; }; - oscclk3 { + clock-controller-3 { /* A7 PLL 1 reference clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 3>; @@ -289,7 +289,7 @@ clock-output-names = "oscclk3"; }; - oscclk4 { + clock-controller-4 { /* External AXI master clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 4>; @@ -298,7 +298,7 @@ clock-output-names = "oscclk4"; }; - hdlcd_clk: oscclk5 { + hdlcd_clk: clock-controller-5 { /* HDLCD PLL reference clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 5>; @@ -307,7 +307,7 @@ clock-output-names = "oscclk5"; }; - smbclk: oscclk6 { + smbclk: clock-controller-6 { /* Static memory controller clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 6>; @@ -316,7 +316,7 @@ clock-output-names = "oscclk6"; }; - oscclk7 { + clock-controller-7 { /* SYS PLL reference clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 7>; @@ -325,7 +325,7 @@ clock-output-names = "oscclk7"; }; - oscclk8 { + clock-controller-8 { /* DDR2 PLL reference clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 8>; @@ -334,7 +334,7 @@ clock-output-names = "oscclk8"; }; - volt-a15 { + regulator-a15 { /* A15 CPU core voltage */ compatible = "arm,vexpress-volt"; arm,vexpress-sysreg,func = <2 0>; @@ -345,7 +345,7 @@ label = "A15 Vcore"; }; - volt-a7 { + regulator-a7 { /* A7 CPU core voltage */ compatible = "arm,vexpress-volt"; arm,vexpress-sysreg,func = <2 1>; diff --git a/arch/arm/boot/dts/arm/vexpress-v2p-ca5s.dts b/arch/arm/boot/dts/arm/vexpress-v2p-ca5s.dts index ff1f9a1bcfcf..e3896253f33e 100644 --- a/arch/arm/boot/dts/arm/vexpress-v2p-ca5s.dts +++ b/arch/arm/boot/dts/arm/vexpress-v2p-ca5s.dts @@ -145,7 +145,7 @@ compatible = "arm,vexpress,config-bus"; arm,vexpress,config-bridge = <&v2m_sysreg>; - cpu_clk: oscclk0 { + cpu_clk: clock-controller-0 { /* CPU and internal AXI reference clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 0>; @@ -154,7 +154,7 @@ clock-output-names = "oscclk0"; }; - axi_clk: oscclk1 { + axi_clk: clock-controller-1 { /* Multiplexed AXI master clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 1>; @@ -163,7 +163,7 @@ clock-output-names = "oscclk1"; }; - oscclk2 { + clock-controller-2 { /* DDR2 */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 2>; @@ -172,7 +172,7 @@ clock-output-names = "oscclk2"; }; - hdlcd_clk: oscclk3 { + hdlcd_clk: clock-controller-3 { /* HDLCD */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 3>; @@ -181,7 +181,7 @@ clock-output-names = "oscclk3"; }; - oscclk4 { + clock-controller-4 { /* Test chip gate configuration */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 4>; @@ -190,7 +190,7 @@ clock-output-names = "oscclk4"; }; - smbclk: oscclk5 { + smbclk: clock-controller-5 { /* SMB clock */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 5>; diff --git a/arch/arm/boot/dts/arm/vexpress-v2p-ca9.dts b/arch/arm/boot/dts/arm/vexpress-v2p-ca9.dts index 8bf35666412b..43a5a4ab6ff0 100644 --- a/arch/arm/boot/dts/arm/vexpress-v2p-ca9.dts +++ b/arch/arm/boot/dts/arm/vexpress-v2p-ca9.dts @@ -187,7 +187,7 @@ compatible = "arm,vexpress,config-bus"; arm,vexpress,config-bridge = <&v2m_sysreg>; - oscclk0: extsaxiclk { + oscclk0: clock-controller-0 { /* ACLK clock to the AXI master port on the test chip */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 0>; @@ -196,7 +196,7 @@ clock-output-names = "extsaxiclk"; }; - oscclk1: clcdclk { + oscclk1: clock-controller-1 { /* Reference clock for the CLCD */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 1>; @@ -205,7 +205,7 @@ clock-output-names = "clcdclk"; }; - smbclk: oscclk2: tcrefclk { + smbclk: oscclk2: clock-controller-2 { /* Reference clock for the test chip internal PLLs */ compatible = "arm,vexpress-osc"; arm,vexpress-sysreg,func = <1 2>; @@ -214,7 +214,7 @@ clock-output-names = "tcrefclk"; }; - volt-vd10 { + regulator-vd10 { /* Test Chip internal logic voltage */ compatible = "arm,vexpress-volt"; arm,vexpress-sysreg,func = <2 0>; @@ -223,7 +223,7 @@ label = "VD10"; }; - volt-vd10-s2 { + regulator-vd10-s2 { /* PL310, L2 cache, RAM cell supply (not PL310 logic) */ compatible = "arm,vexpress-volt"; arm,vexpress-sysreg,func = <2 1>; @@ -232,7 +232,7 @@ label = "VD10_S2"; }; - volt-vd10-s3 { + regulator-vd10-s3 { /* Cortex-A9 system supply, Cores, MPEs, SCU and PL310 logic */ compatible = "arm,vexpress-volt"; arm,vexpress-sysreg,func = <2 2>; @@ -241,7 +241,7 @@ label = "VD10_S3"; }; - volt-vcc1v8 { + regulator-vcc1v8 { /* DDR2 SDRAM and Test Chip DDR2 I/O supply */ compatible = "arm,vexpress-volt"; arm,vexpress-sysreg,func = <2 3>; @@ -250,7 +250,7 @@ label = "VCC1V8"; }; - volt-ddr2vtt { + regulator-ddr2vtt { /* DDR2 SDRAM VTT termination voltage */ compatible = "arm,vexpress-volt"; arm,vexpress-sysreg,func = <2 4>; @@ -259,7 +259,7 @@ label = "DDR2VTT"; }; - volt-vcc3v3 { + regulator-vcc3v3 { /* Local board supply for miscellaneous logic external to the Test Chip */ arm,vexpress-sysreg,func = <2 5>; compatible = "arm,vexpress-volt"; diff --git a/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi index 857cb26ed6d7..c669ec202085 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi +++ b/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi @@ -463,7 +463,7 @@ interrupt-controller; }; - i2c0: i2c-bus@40 { + i2c0: i2c@40 { #address-cells = <1>; #size-cells = <0>; @@ -478,7 +478,7 @@ /* Does not need pinctrl properties */ }; - i2c1: i2c-bus@80 { + i2c1: i2c@80 { #address-cells = <1>; #size-cells = <0>; @@ -493,7 +493,7 @@ /* Does not need pinctrl properties */ }; - i2c2: i2c-bus@c0 { + i2c2: i2c@c0 { #address-cells = <1>; #size-cells = <0>; @@ -509,7 +509,7 @@ status = "disabled"; }; - i2c3: i2c-bus@100 { + i2c3: i2c@100 { #address-cells = <1>; #size-cells = <0>; @@ -525,7 +525,7 @@ status = "disabled"; }; - i2c4: i2c-bus@140 { + i2c4: i2c@140 { #address-cells = <1>; #size-cells = <0>; @@ -541,7 +541,7 @@ status = "disabled"; }; - i2c5: i2c-bus@180 { + i2c5: i2c@180 { #address-cells = <1>; #size-cells = <0>; @@ -557,7 +557,7 @@ status = "disabled"; }; - i2c6: i2c-bus@1c0 { + i2c6: i2c@1c0 { #address-cells = <1>; #size-cells = <0>; @@ -573,7 +573,7 @@ status = "disabled"; }; - i2c7: i2c-bus@300 { + i2c7: i2c@300 { #address-cells = <1>; #size-cells = <0>; @@ -589,7 +589,7 @@ status = "disabled"; }; - i2c8: i2c-bus@340 { + i2c8: i2c@340 { #address-cells = <1>; #size-cells = <0>; @@ -605,7 +605,7 @@ status = "disabled"; }; - i2c9: i2c-bus@380 { + i2c9: i2c@380 { #address-cells = <1>; #size-cells = <0>; @@ -621,7 +621,7 @@ status = "disabled"; }; - i2c10: i2c-bus@3c0 { + i2c10: i2c@3c0 { #address-cells = <1>; #size-cells = <0>; @@ -637,7 +637,7 @@ status = "disabled"; }; - i2c11: i2c-bus@400 { + i2c11: i2c@400 { #address-cells = <1>; #size-cells = <0>; @@ -653,7 +653,7 @@ status = "disabled"; }; - i2c12: i2c-bus@440 { + i2c12: i2c@440 { #address-cells = <1>; #size-cells = <0>; @@ -669,7 +669,7 @@ status = "disabled"; }; - i2c13: i2c-bus@480 { + i2c13: i2c@480 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi index e6f3cf3c721e..6e05cbcce49c 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi +++ b/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi @@ -592,7 +592,7 @@ interrupt-controller; }; - i2c0: i2c-bus@40 { + i2c0: i2c@40 { #address-cells = <1>; #size-cells = <0>; @@ -607,7 +607,7 @@ /* Does not need pinctrl properties */ }; - i2c1: i2c-bus@80 { + i2c1: i2c@80 { #address-cells = <1>; #size-cells = <0>; @@ -622,7 +622,7 @@ /* Does not need pinctrl properties */ }; - i2c2: i2c-bus@c0 { + i2c2: i2c@c0 { #address-cells = <1>; #size-cells = <0>; @@ -638,7 +638,7 @@ status = "disabled"; }; - i2c3: i2c-bus@100 { + i2c3: i2c@100 { #address-cells = <1>; #size-cells = <0>; @@ -654,7 +654,7 @@ status = "disabled"; }; - i2c4: i2c-bus@140 { + i2c4: i2c@140 { #address-cells = <1>; #size-cells = <0>; @@ -670,7 +670,7 @@ status = "disabled"; }; - i2c5: i2c-bus@180 { + i2c5: i2c@180 { #address-cells = <1>; #size-cells = <0>; @@ -686,7 +686,7 @@ status = "disabled"; }; - i2c6: i2c-bus@1c0 { + i2c6: i2c@1c0 { #address-cells = <1>; #size-cells = <0>; @@ -702,7 +702,7 @@ status = "disabled"; }; - i2c7: i2c-bus@300 { + i2c7: i2c@300 { #address-cells = <1>; #size-cells = <0>; @@ -718,7 +718,7 @@ status = "disabled"; }; - i2c8: i2c-bus@340 { + i2c8: i2c@340 { #address-cells = <1>; #size-cells = <0>; @@ -734,7 +734,7 @@ status = "disabled"; }; - i2c9: i2c-bus@380 { + i2c9: i2c@380 { #address-cells = <1>; #size-cells = <0>; @@ -750,7 +750,7 @@ status = "disabled"; }; - i2c10: i2c-bus@3c0 { + i2c10: i2c@3c0 { #address-cells = <1>; #size-cells = <0>; @@ -766,7 +766,7 @@ status = "disabled"; }; - i2c11: i2c-bus@400 { + i2c11: i2c@400 { #address-cells = <1>; #size-cells = <0>; @@ -782,7 +782,7 @@ status = "disabled"; }; - i2c12: i2c-bus@440 { + i2c12: i2c@440 { #address-cells = <1>; #size-cells = <0>; @@ -798,7 +798,7 @@ status = "disabled"; }; - i2c13: i2c-bus@480 { + i2c13: i2c@480 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi index 7fb421153596..0c00882f111a 100644 --- a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi +++ b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi @@ -905,7 +905,7 @@ #include "aspeed-g6-pinctrl.dtsi" &i2c { - i2c0: i2c-bus@80 { + i2c0: i2c@80 { #address-cells = <1>; #size-cells = <0>; reg = <0x80 0x80>; @@ -919,7 +919,7 @@ status = "disabled"; }; - i2c1: i2c-bus@100 { + i2c1: i2c@100 { #address-cells = <1>; #size-cells = <0>; reg = <0x100 0x80>; @@ -933,7 +933,7 @@ status = "disabled"; }; - i2c2: i2c-bus@180 { + i2c2: i2c@180 { #address-cells = <1>; #size-cells = <0>; reg = <0x180 0x80>; @@ -947,7 +947,7 @@ status = "disabled"; }; - i2c3: i2c-bus@200 { + i2c3: i2c@200 { #address-cells = <1>; #size-cells = <0>; reg = <0x200 0x80>; @@ -961,7 +961,7 @@ status = "disabled"; }; - i2c4: i2c-bus@280 { + i2c4: i2c@280 { #address-cells = <1>; #size-cells = <0>; reg = <0x280 0x80>; @@ -975,7 +975,7 @@ status = "disabled"; }; - i2c5: i2c-bus@300 { + i2c5: i2c@300 { #address-cells = <1>; #size-cells = <0>; reg = <0x300 0x80>; @@ -989,7 +989,7 @@ status = "disabled"; }; - i2c6: i2c-bus@380 { + i2c6: i2c@380 { #address-cells = <1>; #size-cells = <0>; reg = <0x380 0x80>; @@ -1003,7 +1003,7 @@ status = "disabled"; }; - i2c7: i2c-bus@400 { + i2c7: i2c@400 { #address-cells = <1>; #size-cells = <0>; reg = <0x400 0x80>; @@ -1017,7 +1017,7 @@ status = "disabled"; }; - i2c8: i2c-bus@480 { + i2c8: i2c@480 { #address-cells = <1>; #size-cells = <0>; reg = <0x480 0x80>; @@ -1031,7 +1031,7 @@ status = "disabled"; }; - i2c9: i2c-bus@500 { + i2c9: i2c@500 { #address-cells = <1>; #size-cells = <0>; reg = <0x500 0x80>; @@ -1045,7 +1045,7 @@ status = "disabled"; }; - i2c10: i2c-bus@580 { + i2c10: i2c@580 { #address-cells = <1>; #size-cells = <0>; reg = <0x580 0x80>; @@ -1059,7 +1059,7 @@ status = "disabled"; }; - i2c11: i2c-bus@600 { + i2c11: i2c@600 { #address-cells = <1>; #size-cells = <0>; reg = <0x600 0x80>; @@ -1073,7 +1073,7 @@ status = "disabled"; }; - i2c12: i2c-bus@680 { + i2c12: i2c@680 { #address-cells = <1>; #size-cells = <0>; reg = <0x680 0x80>; @@ -1087,7 +1087,7 @@ status = "disabled"; }; - i2c13: i2c-bus@700 { + i2c13: i2c@700 { #address-cells = <1>; #size-cells = <0>; reg = <0x700 0x80>; @@ -1101,7 +1101,7 @@ status = "disabled"; }; - i2c14: i2c-bus@780 { + i2c14: i2c@780 { #address-cells = <1>; #size-cells = <0>; reg = <0x780 0x80>; @@ -1115,7 +1115,7 @@ status = "disabled"; }; - i2c15: i2c-bus@800 { + i2c15: i2c@800 { #address-cells = <1>; #size-cells = <0>; reg = <0x800 0x80>; diff --git a/arch/arm/boot/dts/cirrus/ep7211-edb7211.dts b/arch/arm/boot/dts/cirrus/ep7211-edb7211.dts index 7fb532f227af..808cd5778e27 100644 --- a/arch/arm/boot/dts/cirrus/ep7211-edb7211.dts +++ b/arch/arm/boot/dts/cirrus/ep7211-edb7211.dts @@ -30,7 +30,7 @@ display-timings { native-mode = <&timing0>; - timing0: 320x240 { + timing0: timing-320x240 { hactive = <320>; hback-porch = <0>; hfront-porch = <0>; diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-linksys-nslu2.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-linksys-nslu2.dts index 2eec5f63d399..2f7c34c649ea 100644 --- a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-linksys-nslu2.dts +++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-linksys-nslu2.dts @@ -90,11 +90,18 @@ timeout-ms = <5000>; }; - gpio-beeper { - compatible = "gpio-beeper"; + gpio_pwm: pwm { + #pwm-cells = <3>; + compatible = "pwm-gpio"; gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>; }; + beeper { + compatible = "pwm-beeper"; + pwms = <&gpio_pwm 0 1 0>; + beeper-hz = <1000>; + }; + soc { bus@c4000000 { /* The first 16MB region at CS0 on the expansion bus */ diff --git a/arch/arm/boot/dts/marvell/armada-370-xp.dtsi b/arch/arm/boot/dts/marvell/armada-370-xp.dtsi index 0b8c2a64b36f..954c891e5aee 100644 --- a/arch/arm/boot/dts/marvell/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/marvell/armada-370-xp.dtsi @@ -168,7 +168,6 @@ mpic: interrupt-controller@20a00 { compatible = "marvell,mpic"; #interrupt-cells = <1>; - #size-cells = <1>; interrupt-controller; msi-controller; }; diff --git a/arch/arm/boot/dts/marvell/armada-375.dtsi b/arch/arm/boot/dts/marvell/armada-375.dtsi index ddc49547d786..99778b4b7e7b 100644 --- a/arch/arm/boot/dts/marvell/armada-375.dtsi +++ b/arch/arm/boot/dts/marvell/armada-375.dtsi @@ -376,7 +376,6 @@ compatible = "marvell,mpic"; reg = <0x20a00 0x2d0>, <0x21070 0x58>; #interrupt-cells = <1>; - #size-cells = <1>; interrupt-controller; msi-controller; interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/marvell/armada-385-atl-x530.dts b/arch/arm/boot/dts/marvell/armada-385-atl-x530.dts index 5a9ab8410b7b..2fb7304039be 100644 --- a/arch/arm/boot/dts/marvell/armada-385-atl-x530.dts +++ b/arch/arm/boot/dts/marvell/armada-385-atl-x530.dts @@ -43,6 +43,17 @@ }; }; }; + + led-7seg { + compatible = "gpio-7-segment"; + segment-gpios = <&led_7seg_gpio 0 GPIO_ACTIVE_LOW>, + <&led_7seg_gpio 1 GPIO_ACTIVE_LOW>, + <&led_7seg_gpio 2 GPIO_ACTIVE_LOW>, + <&led_7seg_gpio 3 GPIO_ACTIVE_LOW>, + <&led_7seg_gpio 4 GPIO_ACTIVE_LOW>, + <&led_7seg_gpio 5 GPIO_ACTIVE_LOW>, + <&led_7seg_gpio 6 GPIO_ACTIVE_LOW>; + }; }; &pciec { @@ -149,7 +160,7 @@ #size-cells = <0>; reg = <3>; - gpio@20 { + led_7seg_gpio: gpio@20 { compatible = "nxp,pca9554"; gpio-controller; #gpio-cells = <2>; diff --git a/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts b/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts index 7b755bb4e4e7..43202890c959 100644 --- a/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts +++ b/arch/arm/boot/dts/marvell/armada-385-turris-omnia.dts @@ -112,6 +112,19 @@ status = "disabled"; }; + gpio-keys { + compatible = "gpio-keys"; + + front-button { + label = "Front Button"; + linux,code = <KEY_VENDOR>; + linux,can-disable; + gpios = <&mcu 0 12 GPIO_ACTIVE_HIGH>; + /* debouncing is done by the microcontroller */ + debounce-interval = <0>; + }; + }; + sound { compatible = "simple-audio-card"; simple-audio-card,name = "SPDIF"; @@ -218,7 +231,22 @@ #size-cells = <0>; reg = <0>; - /* STM32F0 command interface at address 0x2a */ + mcu: system-controller@2a { + compatible = "cznic,turris-omnia-mcu"; + reg = <0x2a>; + + pinctrl-names = "default"; + pinctrl-0 = <&mcu_pins>; + + interrupt-parent = <&gpio1>; + interrupts = <11 IRQ_TYPE_NONE>; + + gpio-controller; + #gpio-cells = <3>; + + interrupt-controller; + #interrupt-cells = <2>; + }; led-controller@2b { compatible = "cznic,turris-omnia-leds"; @@ -501,6 +529,11 @@ }; &pinctrl { + mcu_pins: mcu-pins { + marvell,pins = "mpp43"; + marvell,function = "gpio"; + }; + pcawan_pins: pcawan-pins { marvell,pins = "mpp46"; marvell,function = "gpio"; diff --git a/arch/arm/boot/dts/marvell/armada-38x.dtsi b/arch/arm/boot/dts/marvell/armada-38x.dtsi index 446861b6b17b..1181b13deabc 100644 --- a/arch/arm/boot/dts/marvell/armada-38x.dtsi +++ b/arch/arm/boot/dts/marvell/armada-38x.dtsi @@ -408,7 +408,6 @@ compatible = "marvell,mpic"; reg = <0x20a00 0x2d0>, <0x21070 0x58>; #interrupt-cells = <1>; - #size-cells = <1>; interrupt-controller; msi-controller; interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/marvell/armada-39x.dtsi b/arch/arm/boot/dts/marvell/armada-39x.dtsi index 9d1cac49c022..6d05835efb42 100644 --- a/arch/arm/boot/dts/marvell/armada-39x.dtsi +++ b/arch/arm/boot/dts/marvell/armada-39x.dtsi @@ -268,7 +268,6 @@ compatible = "marvell,mpic"; reg = <0x20a00 0x2d0>, <0x21070 0x58>; #interrupt-cells = <1>; - #size-cells = <1>; interrupt-controller; msi-controller; interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/marvell/kirkwood-blackarmor-nas220.dts b/arch/arm/boot/dts/marvell/kirkwood-blackarmor-nas220.dts index 07fbfca444d5..36b90c632fd6 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-blackarmor-nas220.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-blackarmor-nas220.dts @@ -35,13 +35,13 @@ gpio_keys { compatible = "gpio-keys"; - reset { + button-reset { label = "Reset"; linux,code = <KEY_POWER>; gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>; }; - button { + button-power { label = "Power"; linux,code = <KEY_SLEEP>; gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; @@ -51,7 +51,7 @@ gpio-leds { compatible = "gpio-leds"; - blue-power { + led-blue-power { label = "nas220:blue:power"; gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; linux,default-trigger = "default-on"; diff --git a/arch/arm/boot/dts/marvell/kirkwood-c200-v1.dts b/arch/arm/boot/dts/marvell/kirkwood-c200-v1.dts index f59ff7578dfc..7e3ee64d4bdf 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-c200-v1.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-c200-v1.dts @@ -29,25 +29,25 @@ pinctrl-0 = <&pmx_buttons>; pinctrl-names = "default"; - power { + button-power { label = "Power Button"; linux,code = <KEY_POWER>; gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>; }; - reset { + button-reset { label = "Reset Button"; linux,code = <KEY_RESTART>; gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; }; - usb1 { + button-usb1 { label = "USB1 Button"; linux,code = <BTN_0>; gpios = <&gpio0 28 GPIO_ACTIVE_LOW>; }; - usb2 { + button-usb2 { label = "USB2 Button"; linux,code = <BTN_1>; gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/marvell/kirkwood-cloudbox.dts b/arch/arm/boot/dts/marvell/kirkwood-cloudbox.dts index 448b0cd23b5f..151edcd140a0 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-cloudbox.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-cloudbox.dts @@ -58,10 +58,8 @@ gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - power { + key-power { label = "Power push button"; linux,code = <KEY_POWER>; gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; @@ -71,11 +69,11 @@ gpio-leds { compatible = "gpio-leds"; - red-fail { + led-red-fail { label = "cloudbox:red:fail"; gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; }; - blue-sata { + led-blue-sata { label = "cloudbox:blue:sata"; gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/marvell/kirkwood-d2net.dts b/arch/arm/boot/dts/marvell/kirkwood-d2net.dts index bd3b266dd766..fcce8730d3e3 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-d2net.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-d2net.dts @@ -37,7 +37,7 @@ gpio-leds { compatible = "gpio-leds"; - red-fail { + led-red-fail { label = "d2net_v2:red:fail"; gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/marvell/kirkwood-dir665.dts b/arch/arm/boot/dts/marvell/kirkwood-dir665.dts index 0c0851cd9bec..2f6793f794cd 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-dir665.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-dir665.dts @@ -137,38 +137,38 @@ gpio-leds { compatible = "gpio-leds"; - blue-usb { + led-blue-usb { label = "dir665:blue:usb"; gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; }; - blue-internet { + led-blue-internet { /* Can only be turned on if the Internet * Ethernet port has Link */ label = "dir665:blue:internet"; gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; }; - amber-internet { + led-amber-internet { label = "dir665:amber:internet"; gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; }; - blue-wifi5g { + led-blue-wifi5g { label = "dir665:blue:5g"; gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; }; - blue-status { + led-blue-status { label = "dir665:blue:status"; gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; }; - blue-wps { + led-blue-wps { label = "dir665:blue:wps"; gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; }; - amber-status { + led-amber-status { label = "dir665:amber:status"; gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>; }; - blue-24g { + led-blue-24g { label = "dir665:blue:24g"; gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; }; @@ -176,15 +176,13 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - reset { + button-reset { label = "reset"; linux,code = <KEY_RESTART>; gpios = <&gpio0 28 GPIO_ACTIVE_LOW>; }; - wps { + button-wps { label = "wps"; linux,code = <KEY_WPS_BUTTON>; gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/marvell/kirkwood-dns320.dts b/arch/arm/boot/dts/marvell/kirkwood-dns320.dts index d6b0f418fd01..d8279e0c4c4f 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-dns320.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-dns320.dts @@ -24,24 +24,24 @@ &pmx_led_white_usb>; pinctrl-names = "default"; - blue-power { + led-blue-power { label = "dns320:blue:power"; gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; default-state = "keep"; }; - blue-usb { + led-blue-usb { label = "dns320:blue:usb"; gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; }; - orange-l_hdd { + led-orange-l_hdd { label = "dns320:orange:l_hdd"; gpios = <&gpio0 28 GPIO_ACTIVE_LOW>; }; - orange-r_hdd { + led-orange-r_hdd { label = "dns320:orange:r_hdd"; gpios = <&gpio0 27 GPIO_ACTIVE_LOW>; }; - orange-usb { + led-orange-usb { label = "dns320:orange:usb"; gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; /* GPIO 35 */ }; diff --git a/arch/arm/boot/dts/marvell/kirkwood-dns325.dts b/arch/arm/boot/dts/marvell/kirkwood-dns325.dts index 94d9c06cbbf5..7f396195e977 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-dns325.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-dns325.dts @@ -24,24 +24,24 @@ &pmx_led_white_usb>; pinctrl-names = "default"; - white-power { + led-white-power { label = "dns325:white:power"; gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; default-state = "keep"; }; - white-usb { + led-white-usb { label = "dns325:white:usb"; gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; /* GPIO 43 */ }; - red-l_hdd { + led-red-l_hdd { label = "dns325:red:l_hdd"; gpios = <&gpio0 28 GPIO_ACTIVE_LOW>; }; - red-r_hdd { + led-red-r_hdd { label = "dns325:red:r_hdd"; gpios = <&gpio0 27 GPIO_ACTIVE_LOW>; }; - red-usb { + led-red-usb { label = "dns325:red:usb"; gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/marvell/kirkwood-dnskw.dtsi b/arch/arm/boot/dts/marvell/kirkwood-dnskw.dtsi index 0738eb679fcd..20bcd031f3f5 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-dnskw.dtsi +++ b/arch/arm/boot/dts/marvell/kirkwood-dnskw.dtsi @@ -8,23 +8,21 @@ gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; pinctrl-0 = <&pmx_button_power &pmx_button_unmount &pmx_button_reset>; pinctrl-names = "default"; - power { + button-power { label = "Power button"; linux,code = <KEY_POWER>; gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; }; - eject { + button-eject { label = "USB unmount button"; linux,code = <KEY_EJECTCD>; gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; }; - reset { + button-reset { label = "Reset button"; linux,code = <KEY_RESTART>; gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/marvell/kirkwood-dockstar.dts b/arch/arm/boot/dts/marvell/kirkwood-dockstar.dts index 264938dfa4d9..090f1e2e5bb6 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-dockstar.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-dockstar.dts @@ -42,12 +42,12 @@ pinctrl-0 = <&pmx_led_green &pmx_led_orange>; pinctrl-names = "default"; - health { + led-health { label = "status:green:health"; gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; default-state = "keep"; }; - fault { + led-fault { label = "status:orange:fault"; gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/marvell/kirkwood-dreamplug.dts b/arch/arm/boot/dts/marvell/kirkwood-dreamplug.dts index 328516351e84..590bee3c561c 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-dreamplug.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-dreamplug.dts @@ -85,15 +85,15 @@ &pmx_led_wifi_ap >; pinctrl-names = "default"; - bluetooth { + led-bluetooth { label = "dreamplug:blue:bluetooth"; gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; }; - wifi { + led-wifi { label = "dreamplug:green:wifi"; gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; }; - wifi-ap { + led-wifi-ap { label = "dreamplug:green:wifi_ap"; gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/marvell/kirkwood-goflexnet.dts b/arch/arm/boot/dts/marvell/kirkwood-goflexnet.dts index d4cb3cd3e2a2..d5ac4e3974da 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-goflexnet.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-goflexnet.dts @@ -85,44 +85,44 @@ >; pinctrl-names = "default"; - health { + led-health { label = "status:green:health"; gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; default-state = "keep"; }; - fault { + led-fault { label = "status:orange:fault"; gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; }; - left0 { + led-left0 { label = "status:white:left0"; gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; }; - left1 { + led-left1 { label = "status:white:left1"; gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; }; - left2 { + led-left2 { label = "status:white:left2"; gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>; }; - left3 { + led-left3 { label = "status:white:left3"; gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; }; - right0 { + led-right0 { label = "status:white:right0"; gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; }; - right1 { + led-right1 { label = "status:white:right1"; gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; }; - right2 { + led-right2 { label = "status:white:right2"; gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; }; - right3 { + led-right3 { label = "status:white:right3"; gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/marvell/kirkwood-guruplug-server-plus.dts b/arch/arm/boot/dts/marvell/kirkwood-guruplug-server-plus.dts index dfb41393941d..d5aa8b505cc0 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-guruplug-server-plus.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-guruplug-server-plus.dts @@ -59,19 +59,19 @@ &pmx_led_wmode_r &pmx_led_wmode_g >; pinctrl-names = "default"; - health-r { + led-health-r { label = "guruplug:red:health"; gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; }; - health-g { + led-health-g { label = "guruplug:green:health"; gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; }; - wmode-r { + led-wmode-r { label = "guruplug:red:wmode"; gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; }; - wmode-g { + led-wmode-g { label = "guruplug:green:wmode"; gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/marvell/kirkwood-ib62x0.dts b/arch/arm/boot/dts/marvell/kirkwood-ib62x0.dts index 962a910a6f5c..018c6b8f3e8a 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-ib62x0.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-ib62x0.dts @@ -58,17 +58,15 @@ gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; pinctrl-0 = <&pmx_button_reset &pmx_button_usb_copy>; pinctrl-names = "default"; - copy { + button-copy { label = "USB Copy"; linux,code = <KEY_COPY>; gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; }; - reset { + button-reset { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&gpio0 28 GPIO_ACTIVE_LOW>; @@ -81,16 +79,16 @@ &pmx_led_usb_transfer>; pinctrl-names = "default"; - green-os { + led-green-os { label = "ib62x0:green:os"; gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>; default-state = "keep"; }; - red-os { + led-red-os { label = "ib62x0:red:os"; gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>; }; - usb-copy { + led-usb-copy { label = "ib62x0:red:usb_copy"; gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/marvell/kirkwood-iconnect.dts b/arch/arm/boot/dts/marvell/kirkwood-iconnect.dts index aed20185fd7a..91b46e77e0b6 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-iconnect.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-iconnect.dts @@ -89,32 +89,32 @@ gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; default-state = "on"; }; - power-blue { + led-power-blue { label = "power:blue"; gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; default-state = "keep"; }; - power-red { + led-power-red { label = "power:red"; gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; }; - usb1 { + led-usb1 { label = "usb1:blue"; gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>; }; - usb2 { + led-usb2 { label = "usb2:blue"; gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; }; - usb3 { + led-usb3 { label = "usb3:blue"; gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; }; - usb4 { + led-usb4 { label = "usb4:blue"; gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; }; - otb { + led-otb { label = "otb:blue"; gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>; }; @@ -122,18 +122,16 @@ gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; pinctrl-0 = < &pmx_button_reset &pmx_button_otb >; pinctrl-names = "default"; - otb { + button-otb { label = "OTB Button"; linux,code = <KEY_COPY>; gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; debounce-interval = <100>; }; - reset { + button-reset { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/marvell/kirkwood-iomega_ix2_200.dts b/arch/arm/boot/dts/marvell/kirkwood-iomega_ix2_200.dts index 2338f495d517..039362152650 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-iomega_ix2_200.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-iomega_ix2_200.dts @@ -127,44 +127,42 @@ &pmx_led_rebuild &pmx_led_health >; pinctrl-names = "default"; - power_led { + led-power-led { label = "status:white:power_led"; gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; default-state = "keep"; }; - rebuild_led { + led-rebuild-led { label = "status:white:rebuild_led"; gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; }; - health_led { + led-health-led { label = "status:red:health_led"; gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; }; - backup_led { + led-backup-led { label = "status:blue:backup_led"; gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; }; }; gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; pinctrl-0 = <&pmx_button_reset &pmx_button_power &pmx_button_otb>; pinctrl-names = "default"; - Power { + button-power { label = "Power Button"; linux,code = <KEY_POWER>; gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; }; - Reset { + button-reset { label = "Reset Button"; linux,code = <KEY_RESTART>; gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; }; - OTB { + button-otb { label = "OTB Button"; linux,code = <KEY_COPY>; gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/marvell/kirkwood-l-50.dts b/arch/arm/boot/dts/marvell/kirkwood-l-50.dts index c841eb8e7fb1..974bc9de4702 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-l-50.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-l-50.dts @@ -97,52 +97,52 @@ leds { compatible = "gpio-leds"; - status_green { + led-status-green { label = "l-50:green:status"; gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; }; - status_red { + led-status-red { label = "l-50:red:status"; gpios = <&gpio3 2 GPIO_ACTIVE_LOW>; }; - wifi { + led-wifi { label = "l-50:green:wifi"; gpios = <&gpio2 7 GPIO_ACTIVE_LOW>; linux,default-trigger = "phy0tpt"; }; - internet_green { + led-internet-green { label = "l-50:green:internet"; gpios = <&gpio2 3 GPIO_ACTIVE_LOW>; }; - internet_red { + led-internet-red { label = "l-50:red:internet"; gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; }; - usb1_green { + led-usb1-green { label = "l-50:green:usb1"; gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; linux,default-trigger = "usbport"; trigger-sources = <&hub_port3>; }; - usb1_red { + led-usb1-red { label = "l-50:red:usb1"; gpios = <&gpio2 4 GPIO_ACTIVE_LOW>; }; - usb2_green { + led-usb2-green { label = "l-50:green:usb2"; gpios = <&gpio2 2 GPIO_ACTIVE_LOW>; linux,default-trigger = "usbport"; trigger-sources = <&hub_port1>; }; - usb2_red { + led-usb2-red { label = "l-50:red:usb2"; gpios = <&gpio2 5 GPIO_ACTIVE_LOW>; }; @@ -193,7 +193,7 @@ keys { compatible = "gpio-keys"; - factory_defaults { + button-factory-defaults { label = "factory_defaults"; gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; linux,code = <KEY_RESTART>; diff --git a/arch/arm/boot/dts/marvell/kirkwood-laplug.dts b/arch/arm/boot/dts/marvell/kirkwood-laplug.dts index 8c2b540eaf4f..90ea6cdee8e0 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-laplug.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-laplug.dts @@ -51,7 +51,7 @@ gpio_keys { compatible = "gpio-keys"; - power { + button-power { label = "Power push button"; linux,code = <KEY_POWER>; gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>; @@ -61,11 +61,11 @@ gpio-leds { compatible = "gpio-leds"; - red-fail { + led-red-fail { label = "laplug_v2:red:power"; gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; }; - blue-power { + led-blue-power { label = "laplug_v2:blue:power"; gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>; linux,default-trigger = "default-on"; diff --git a/arch/arm/boot/dts/marvell/kirkwood-linkstation.dtsi b/arch/arm/boot/dts/marvell/kirkwood-linkstation.dtsi index b54c9980f636..8a11d2b9d449 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-linkstation.dtsi +++ b/arch/arm/boot/dts/marvell/kirkwood-linkstation.dtsi @@ -88,8 +88,6 @@ gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; pinctrl-0 = <&pmx_button_function &pmx_power_switch &pmx_power_auto_switch>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/marvell/kirkwood-linksys-viper.dts b/arch/arm/boot/dts/marvell/kirkwood-linksys-viper.dts index 27fd6e2337d5..8a1c38ab6111 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-linksys-viper.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-linksys-viper.dts @@ -33,18 +33,16 @@ gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; pinctrl-0 = < &pmx_btn_wps &pmx_btn_reset >; pinctrl-names = "default"; - wps { + button-wps { label = "WPS Button"; linux,code = <KEY_WPS_BUTTON>; gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; }; - reset { + button-reset { label = "Reset Button"; linux,code = <KEY_RESTART>; gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; @@ -56,12 +54,12 @@ pinctrl-0 = < &pmx_led_white_health &pmx_led_white_pulse >; pinctrl-names = "default"; - white-health { + led-white-health { label = "viper:white:health"; gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>; }; - white-pulse { + led-white-pulse { label = "viper:white:pulse"; gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/marvell/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/marvell/kirkwood-lsxl.dtsi index f80af24b9e90..5e0b139dd4fb 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-lsxl.dtsi +++ b/arch/arm/boot/dts/marvell/kirkwood-lsxl.dtsi @@ -107,24 +107,22 @@ gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; pinctrl-0 = <&pmx_button_function &pmx_power_switch &pmx_power_auto_switch>; pinctrl-names = "default"; - option { + button-option { label = "Function Button"; linux,code = <KEY_OPTION>; gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; }; - reserved { + button-reserved { label = "Power-on Switch"; linux,code = <KEY_RESERVED>; linux,input-type = <5>; gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; }; - power { + button-power { label = "Power-auto Switch"; linux,code = <KEY_ESC>; linux,input-type = <5>; @@ -139,28 +137,28 @@ &pmx_led_function_blue>; pinctrl-names = "default"; - func_blue { + led-func-blue { label = "lsxl:blue:func"; gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; }; - alarm { + led-alarm { label = "lsxl:red:alarm"; gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; }; - info { + led-info { label = "lsxl:amber:info"; gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; }; - power { + led-power { label = "lsxl:blue:power"; gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; default-state = "keep"; }; - func_red { + led-func-red { label = "lsxl:red:func"; gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/marvell/kirkwood-mplcec4.dts b/arch/arm/boot/dts/marvell/kirkwood-mplcec4.dts index e87ea7146546..6533b49a15b2 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-mplcec4.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-mplcec4.dts @@ -114,36 +114,36 @@ >; pinctrl-names = "default"; - health { + led-health { label = "status:green:health"; gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; }; - user1o { + led-user1o { label = "user1:orange"; gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; default-state = "on"; }; - user1g { + led-user1g { label = "user1:green"; gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; default-state = "on"; }; - user0o { + led-user0o { label = "user0:orange"; gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; default-state = "on"; }; - user0g { + led-user0g { label = "user0:green"; gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; default-state = "on"; }; - misc { + led-misc { label = "status:orange:misc"; gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; default-state = "on"; diff --git a/arch/arm/boot/dts/marvell/kirkwood-mv88f6281gtw-ge.dts b/arch/arm/boot/dts/marvell/kirkwood-mv88f6281gtw-ge.dts index 5a77286136c7..e3b41784c876 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-mv88f6281gtw-ge.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-mv88f6281gtw-ge.dts @@ -73,17 +73,17 @@ pinctrl-0 = <&pmx_leds &pmx_usb_led>; pinctrl-names = "default"; - green-status { + led-green-status { label = "gtw:green:Status"; gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>; }; - red-status { + led-red-status { label = "gtw:red:Status"; gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>; }; - green-usb { + led-green-usb { label = "gtw:green:USB"; gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; }; @@ -91,17 +91,15 @@ gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; pinctrl-0 = <&pmx_keys>; pinctrl-names = "default"; - restart { + button-restart { label = "SWR Button"; linux,code = <KEY_RESTART>; gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; }; - wps { + button-wps { label = "WPS Button"; linux,code = <KEY_WPS_BUTTON>; gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/marvell/kirkwood-netxbig.dtsi b/arch/arm/boot/dts/marvell/kirkwood-netxbig.dtsi index b5737026e244..d4edf2727388 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-netxbig.dtsi +++ b/arch/arm/boot/dts/marvell/kirkwood-netxbig.dtsi @@ -53,26 +53,24 @@ gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; /* * esc and power represent a three position rocker * switch. Thus the conventional KEY_POWER does not fit */ - exc { + button-exc { label = "Back power switch (on|auto)"; linux,code = <KEY_ESC>; linux,input-type = <5>; gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; }; - power { + button-power { label = "Back power switch (auto|off)"; linux,code = <KEY_1>; linux,input-type = <5>; gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; }; - option { + button-option { label = "Function button"; linux,code = <KEY_OPTION>; gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/marvell/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/marvell/kirkwood-ns2-common.dtsi index 51530ea86622..d6b615cf6390 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-ns2-common.dtsi +++ b/arch/arm/boot/dts/marvell/kirkwood-ns2-common.dtsi @@ -55,10 +55,8 @@ gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - power { + button-power { label = "Power push button"; linux,code = <KEY_POWER>; gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>; @@ -68,7 +66,7 @@ gpio-leds { compatible = "gpio-leds"; - red-fail { + led-red-fail { label = "ns2:red:fail"; gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/marvell/kirkwood-ns2lite.dts b/arch/arm/boot/dts/marvell/kirkwood-ns2lite.dts index b0cb5907ed63..686bcd6f0f3c 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-ns2lite.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-ns2lite.dts @@ -24,7 +24,7 @@ gpio-leds { compatible = "gpio-leds"; - blue-sata { + led-blue-sata { label = "ns2:blue:sata"; gpios = <&gpio0 30 GPIO_ACTIVE_LOW>; linux,default-trigger = "disk-activity"; diff --git a/arch/arm/boot/dts/marvell/kirkwood-nsa310.dts b/arch/arm/boot/dts/marvell/kirkwood-nsa310.dts index c1799a07816e..3555ac1c3b15 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-nsa310.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-nsa310.dts @@ -87,43 +87,43 @@ &pmx_led_hdd_green &pmx_led_hdd_red>; pinctrl-names = "default"; - green-sys { + led-green-sys { label = "nsa310:green:sys"; gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>; }; - red-sys { + led-red-sys { label = "nsa310:red:sys"; gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>; }; - green-hdd { + led-green-hdd { label = "nsa310:green:hdd"; gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; }; - red-hdd { + led-red-hdd { label = "nsa310:red:hdd"; gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; }; - green-esata { + led-green-esata { label = "nsa310:green:esata"; gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; }; - red-esata { + led-red-esata { label = "nsa310:red:esata"; gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; }; - green-usb { + led-green-usb { label = "nsa310:green:usb"; gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; }; - red-usb { + led-red-usb { label = "nsa310:red:usb"; gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; }; - green-copy { + led-green-copy { label = "nsa310:green:copy"; gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; }; - red-copy { + led-red-copy { label = "nsa310:red:copy"; gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/marvell/kirkwood-nsa310a.dts b/arch/arm/boot/dts/marvell/kirkwood-nsa310a.dts index b85e314f045a..ddf84092aade 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-nsa310a.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-nsa310a.dts @@ -75,39 +75,39 @@ gpio-leds { compatible = "gpio-leds"; - green-sys { + led-green-sys { label = "nsa310:green:sys"; gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>; }; - red-sys { + led-red-sys { label = "nsa310:red:sys"; gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>; }; - green-hdd { + led-green-hdd { label = "nsa310:green:hdd"; gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; }; - red-hdd { + led-red-hdd { label = "nsa310:red:hdd"; gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; }; - green-esata { + led-green-esata { label = "nsa310:green:esata"; gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; }; - red-esata { + led-red-esata { label = "nsa310:red:esata"; gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; }; - green-usb { + led-green-usb { label = "nsa310:green:usb"; gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; }; - green-copy { + led-green-copy { label = "nsa310:green:copy"; gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; }; - red-copy { + led-red-copy { label = "nsa310:red:copy"; gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/marvell/kirkwood-nsa310s.dts b/arch/arm/boot/dts/marvell/kirkwood-nsa310s.dts index 49da633a1bc0..47deb93c90a5 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-nsa310s.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-nsa310s.dts @@ -35,24 +35,22 @@ keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; pinctrl-0 = <&pmx_buttons>; pinctrl-names = "default"; - power { + button-power { label = "Power Button"; linux,code = <KEY_POWER>; gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>; }; - copy { + button-copy { label = "Copy Button"; linux,code = <KEY_COPY>; gpios = <&gpio0 25 GPIO_ACTIVE_LOW>; }; - reset { + button-reset { label = "Reset Button"; linux,code = <KEY_RESTART>; gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/marvell/kirkwood-nsa320.dts b/arch/arm/boot/dts/marvell/kirkwood-nsa320.dts index 652405e65006..dd5c8ffc8781 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-nsa320.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-nsa320.dts @@ -142,39 +142,39 @@ &pmx_led_hdd1_green &pmx_led_hdd1_red>; pinctrl-names = "default"; - green-sys { + led-green-sys { label = "nsa320:green:sys"; gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>; }; - orange-sys { + led-orange-sys { label = "nsa320:orange:sys"; gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>; }; - green-hdd1 { + led-green-hdd1 { label = "nsa320:green:hdd1"; gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; }; - red-hdd1 { + led-red-hdd1 { label = "nsa320:red:hdd1"; gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; }; - green-hdd2 { + led-green-hdd2 { label = "nsa320:green:hdd2"; gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; }; - red-hdd2 { + led-red-hdd2 { label = "nsa320:red:hdd2"; gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; }; - green-usb { + led-green-usb { label = "nsa320:green:usb"; gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; }; - green-copy { + led-green-copy { label = "nsa320:green:copy"; gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; }; - red-copy { + led-red-copy { label = "nsa320:red:copy"; gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/marvell/kirkwood-nsa325.dts b/arch/arm/boot/dts/marvell/kirkwood-nsa325.dts index 371456de34b2..f0786a5f2ce6 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-nsa325.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-nsa325.dts @@ -162,39 +162,39 @@ &pmx_led_hdd1_green &pmx_led_hdd1_red>; pinctrl-names = "default"; - green-sys { + led-green-sys { label = "nsa325:green:sys"; gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>; }; - orange-sys { + led-orange-sys { label = "nsa325:orange:sys"; gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>; }; - green-hdd1 { + led-green-hdd1 { label = "nsa325:green:hdd1"; gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; }; - red-hdd1 { + led-red-hdd1 { label = "nsa325:red:hdd1"; gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; }; - green-hdd2 { + led-green-hdd2 { label = "nsa325:green:hdd2"; gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; }; - red-hdd2 { + led-red-hdd2 { label = "nsa325:red:hdd2"; gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; }; - green-usb { + led-green-usb { label = "nsa325:green:usb"; gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; }; - green-copy { + led-green-copy { label = "nsa325:green:copy"; gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; }; - red-copy { + led-red-copy { label = "nsa325:red:copy"; gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; }; diff --git a/arch/arm/boot/dts/marvell/kirkwood-nsa3x0-common.dtsi b/arch/arm/boot/dts/marvell/kirkwood-nsa3x0-common.dtsi index ea3d36512e9f..e9bd9c551af5 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-nsa3x0-common.dtsi +++ b/arch/arm/boot/dts/marvell/kirkwood-nsa3x0-common.dtsi @@ -63,22 +63,20 @@ gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; pinctrl-0 = <&pmx_btn_reset &pmx_btn_copy &pmx_btn_power>; pinctrl-names = "default"; - power { + button-power { label = "Power Button"; linux,code = <KEY_POWER>; gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; }; - copy { + button-copy { label = "Copy Button"; linux,code = <KEY_COPY>; gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; }; - reset { + button-reset { label = "Reset Button"; linux,code = <KEY_RESTART>; gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/marvell/kirkwood-openblocks_a6.dts b/arch/arm/boot/dts/marvell/kirkwood-openblocks_a6.dts index 8ea430168ea5..20c6290d2037 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-openblocks_a6.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-openblocks_a6.dts @@ -115,10 +115,8 @@ compatible = "gpio-keys"; pinctrl-0 = <&pmx_gpio_init>; pinctrl-names = "default"; - #address-cells = <1>; - #size-cells = <0>; - power { + button-power { label = "Init Button"; linux,code = <KEY_POWER>; gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/marvell/kirkwood-openblocks_a7.dts b/arch/arm/boot/dts/marvell/kirkwood-openblocks_a7.dts index 946f0f453dd1..9c438f10f737 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-openblocks_a7.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-openblocks_a7.dts @@ -136,8 +136,6 @@ compatible = "gpio-keys"; pinctrl-0 = <&pmx_gpio_init>; pinctrl-names = "default"; - #address-cells = <1>; - #size-cells = <0>; button { label = "Init Button"; diff --git a/arch/arm/boot/dts/marvell/kirkwood-pogo_e02.dts b/arch/arm/boot/dts/marvell/kirkwood-pogo_e02.dts index f9e95e55f36d..39a5345332da 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-pogo_e02.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-pogo_e02.dts @@ -33,12 +33,12 @@ gpio-leds { compatible = "gpio-leds"; - health { + led-health { label = "pogo_e02:green:health"; gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; default-state = "keep"; }; - fault { + led-fault { label = "pogo_e02:orange:fault"; gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/marvell/kirkwood-pogoplug-series-4.dts b/arch/arm/boot/dts/marvell/kirkwood-pogoplug-series-4.dts index 5aa4669ae254..0e9c4cf79822 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-pogoplug-series-4.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-pogoplug-series-4.dts @@ -29,12 +29,10 @@ gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; pinctrl-0 = <&pmx_button_eject>; pinctrl-names = "default"; - eject { + button-eject { debounce-interval = <50>; wakeup-source; linux,code = <KEY_EJECTCD>; @@ -48,12 +46,12 @@ pinctrl-0 = <&pmx_led_green &pmx_led_red>; pinctrl-names = "default"; - health { + led-health { label = "pogoplugv4:green:health"; gpios = <&gpio0 22 GPIO_ACTIVE_LOW>; default-state = "on"; }; - fault { + led-fault { label = "pogoplugv4:red:fault"; gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/marvell/kirkwood-sheevaplug-esata.dts b/arch/arm/boot/dts/marvell/kirkwood-sheevaplug-esata.dts index ae8f493c9a0f..eb185273376e 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-sheevaplug-esata.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-sheevaplug-esata.dts @@ -33,7 +33,7 @@ pinctrl-0 = <&pmx_led_blue>; pinctrl-names = "default"; - health { + led-health { label = "sheevaplug:blue:health"; gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; default-state = "keep"; diff --git a/arch/arm/boot/dts/marvell/kirkwood-sheevaplug.dts b/arch/arm/boot/dts/marvell/kirkwood-sheevaplug.dts index c73cc904e5c4..ce73fcf2255f 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-sheevaplug.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-sheevaplug.dts @@ -28,13 +28,13 @@ pinctrl-0 = <&pmx_led_blue &pmx_led_red>; pinctrl-names = "default"; - health { + led-health { label = "sheevaplug:blue:health"; gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; default-state = "keep"; }; - misc { + led-misc { label = "sheevaplug:red:misc"; gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/marvell/kirkwood-synology.dtsi b/arch/arm/boot/dts/marvell/kirkwood-synology.dtsi index 20964eb48fd7..6b7c5218b1fb 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-synology.dtsi +++ b/arch/arm/boot/dts/marvell/kirkwood-synology.dtsi @@ -410,7 +410,7 @@ pinctrl-0 = <&pmx_alarmled_12>; pinctrl-names = "default"; - hdd1-green { + led-hdd1-green { label = "synology:alarm"; gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; }; @@ -424,42 +424,42 @@ &pmx_hddled_26 &pmx_hddled_27>; pinctrl-names = "default"; - hdd1-green { + led-hdd1-green { label = "synology:green:hdd1"; gpios = <&gpio0 20 GPIO_ACTIVE_LOW>; }; - hdd1-amber { + led-hdd1-amber { label = "synology:amber:hdd1"; gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; }; - hdd2-green { + led-hdd2-green { label = "synology:green:hdd2"; gpios = <&gpio0 22 GPIO_ACTIVE_LOW>; }; - hdd2-amber { + led-hdd2-amber { label = "synology:amber:hdd2"; gpios = <&gpio0 23 GPIO_ACTIVE_LOW>; }; - hdd3-green { + led-hdd3-green { label = "synology:green:hdd3"; gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; }; - hdd3-amber { + led-hdd3-amber { label = "synology:amber:hdd3"; gpios = <&gpio0 25 GPIO_ACTIVE_LOW>; }; - hdd4-green { + led-hdd4-green { label = "synology:green:hdd4"; gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; }; - hdd4-amber { + led-hdd4-amber { label = "synology:amber:hdd4"; gpios = <&gpio0 27 GPIO_ACTIVE_LOW>; }; @@ -471,12 +471,12 @@ pinctrl-0 = <&pmx_hddled_21 &pmx_hddled_23>; pinctrl-names = "default"; - hdd1-green { + led-hdd1-green { label = "synology:green:hdd1"; gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; }; - hdd1-amber { + led-hdd1-amber { label = "synology:amber:hdd1"; gpios = <&gpio0 23 GPIO_ACTIVE_LOW>; }; @@ -488,22 +488,22 @@ pinctrl-0 = <&pmx_hddled_21 &pmx_hddled_23 &pmx_hddled_20 &pmx_hddled_22>; pinctrl-names = "default"; - hdd1-green { + led-hdd1-green { label = "synology:green:hdd1"; gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; }; - hdd1-amber { + led-hdd1-amber { label = "synology:amber:hdd1"; gpios = <&gpio0 23 GPIO_ACTIVE_LOW>; }; - hdd2-green { + led-hdd2-green { label = "synology:green:hdd2"; gpios = <&gpio0 20 GPIO_ACTIVE_LOW>; }; - hdd2-amber { + led-hdd2-amber { label = "synology:amber:hdd2"; gpios = <&gpio0 22 GPIO_ACTIVE_LOW>; }; @@ -518,52 +518,52 @@ &pmx_hddled_45>; pinctrl-names = "default"; - hdd1-green { + led-hdd1-green { label = "synology:green:hdd1"; gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; }; - hdd1-amber { + led-hdd1-amber { label = "synology:amber:hdd1"; gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; }; - hdd2-green { + led-hdd2-green { label = "synology:green:hdd2"; gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; }; - hdd2-amber { + led-hdd2-amber { label = "synology:amber:hdd2"; gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; }; - hdd3-green { + led-hdd3-green { label = "synology:green:hdd3"; gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; }; - hdd3-amber { + led-hdd3-amber { label = "synology:amber:hdd3"; gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; }; - hdd4-green { + led-hdd4-green { label = "synology:green:hdd4"; gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; }; - hdd4-amber { + led-hdd4-amber { label = "synology:amber:hdd4"; gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; }; - hdd5-green { + led-hdd5-green { label = "synology:green:hdd5"; gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; }; - hdd5-amber { + led-hdd5-amber { label = "synology:amber:hdd5"; gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; }; @@ -575,22 +575,22 @@ pinctrl-0 = <&pmx_hddled_38 &pmx_hddled_39 &pmx_hddled_36 &pmx_hddled_37>; pinctrl-names = "default"; - hdd1-green { + led-hdd1-green { label = "synology:green:hdd1"; gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; }; - hdd1-amber { + led-hdd1-amber { label = "synology:amber:hdd1"; gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; }; - hdd2-green { + led-hdd2-green { label = "synology:green:hdd2"; gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; }; - hdd2-amber { + led-hdd2-amber { label = "synology:amber:hdd2"; gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/marvell/kirkwood-t5325.dts b/arch/arm/boot/dts/marvell/kirkwood-t5325.dts index ad093324e075..a6e77a487d00 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-t5325.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-t5325.dts @@ -156,12 +156,10 @@ gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; pinctrl-0 = <&pmx_button_power>; pinctrl-names = "default"; - power { + button-power { label = "Power Button"; linux,code = <KEY_POWER>; gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/marvell/kirkwood-ts219-6281.dts b/arch/arm/boot/dts/marvell/kirkwood-ts219-6281.dts index 30892c19aceb..a2e0ad4b84d8 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-ts219-6281.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-ts219-6281.dts @@ -35,17 +35,15 @@ gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>; pinctrl-names = "default"; - copy { + button-copy { label = "USB Copy"; linux,code = <KEY_COPY>; gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; }; - reset { + button-reset { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/marvell/kirkwood-ts219-6282.dts b/arch/arm/boot/dts/marvell/kirkwood-ts219-6282.dts index aba1205981f1..35be6bce1dba 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-ts219-6282.dts +++ b/arch/arm/boot/dts/marvell/kirkwood-ts219-6282.dts @@ -35,17 +35,15 @@ gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>; pinctrl-names = "default"; - copy { + button-copy { label = "USB Copy"; linux,code = <KEY_COPY>; gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; }; - reset { + button-reset { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/marvell/kirkwood-ts419.dtsi b/arch/arm/boot/dts/marvell/kirkwood-ts419.dtsi index 717236853e45..f136059607b7 100644 --- a/arch/arm/boot/dts/marvell/kirkwood-ts419.dtsi +++ b/arch/arm/boot/dts/marvell/kirkwood-ts419.dtsi @@ -36,17 +36,15 @@ gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; pinctrl-0 = <&pmx_reset_button &pmx_USB_copy_button>; pinctrl-names = "default"; - copy { + button-copy { label = "USB Copy"; linux,code = <KEY_COPY>; gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; }; - reset { + button-reset { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/marvell/mvebu-linkstation-gpio-simple.dtsi b/arch/arm/boot/dts/marvell/mvebu-linkstation-gpio-simple.dtsi index c2d87ba6190a..055ac754c5fd 100644 --- a/arch/arm/boot/dts/marvell/mvebu-linkstation-gpio-simple.dtsi +++ b/arch/arm/boot/dts/marvell/mvebu-linkstation-gpio-simple.dtsi @@ -48,8 +48,6 @@ / { gpio_keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; pinctrl-0 = <&pmx_power_switch>; pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/marvell/orion5x-lacie-d2-network.dts b/arch/arm/boot/dts/marvell/orion5x-lacie-d2-network.dts index 03471d30bfd9..12a4aac2633e 100644 --- a/arch/arm/boot/dts/marvell/orion5x-lacie-d2-network.dts +++ b/arch/arm/boot/dts/marvell/orion5x-lacie-d2-network.dts @@ -35,22 +35,21 @@ compatible = "gpio-keys"; pinctrl-0 = <&pmx_buttons>; pinctrl-names = "default"; - #address-cells = <1>; - #size-cells = <0>; - front_button { + + button-front { label = "Front Push Button"; linux,code = <KEY_POWER>; gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>; }; - power_rocker_sw_on { + switch-power-rocker-sw-on { label = "Power rocker switch (on|auto)"; linux,input-type = <5>; /* EV_SW */ linux,code = <1>; /* D2NET_SWITCH_POWER_ON */ gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>; }; - power_rocker_sw_off { + switch-power-rocker-sw-off { label = "Power rocker switch (auto|off)"; linux,input-type = <5>; /* EV_SW */ linux,code = <2>; /* D2NET_SWITCH_POWER_OFF */ diff --git a/arch/arm/boot/dts/marvell/orion5x-lacie-ethernet-disk-mini-v2.dts b/arch/arm/boot/dts/marvell/orion5x-lacie-ethernet-disk-mini-v2.dts index f17e25ac98dd..f81acb9b7223 100644 --- a/arch/arm/boot/dts/marvell/orion5x-lacie-ethernet-disk-mini-v2.dts +++ b/arch/arm/boot/dts/marvell/orion5x-lacie-ethernet-disk-mini-v2.dts @@ -39,9 +39,8 @@ compatible = "gpio-keys"; pinctrl-0 = <&pmx_power_button>; pinctrl-names = "default"; - #address-cells = <1>; - #size-cells = <0>; - button@1 { + + button-1 { label = "Power-on Switch"; linux,code = <KEY_POWER>; gpios = <&gpio0 18 GPIO_ACTIVE_HIGH>; @@ -53,7 +52,7 @@ pinctrl-0 = <&pmx_power_led>; pinctrl-names = "default"; - led@1 { + led-1 { label = "power:blue"; gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/marvell/orion5x-linkstation-lschl.dts b/arch/arm/boot/dts/marvell/orion5x-linkstation-lschl.dts index ee751995c8d0..79fee048c900 100644 --- a/arch/arm/boot/dts/marvell/orion5x-linkstation-lschl.dts +++ b/arch/arm/boot/dts/marvell/orion5x-linkstation-lschl.dts @@ -61,7 +61,7 @@ }; gpio_keys { - func { + func-button { label = "Function Button"; linux,code = <KEY_OPTION>; gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; @@ -90,7 +90,7 @@ gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; }; - func { + func-led { label = "lschl:func:blue:top"; gpios = <&gpio0 17 GPIO_ACTIVE_LOW>; }; diff --git a/arch/arm/boot/dts/marvell/orion5x-lswsgl.dts b/arch/arm/boot/dts/marvell/orion5x-lswsgl.dts index 2fbc17d6dfa4..e0da406c430f 100644 --- a/arch/arm/boot/dts/marvell/orion5x-lswsgl.dts +++ b/arch/arm/boot/dts/marvell/orion5x-lswsgl.dts @@ -74,22 +74,21 @@ compatible = "gpio-keys"; pinctrl-0 = <&pmx_buttons>; pinctrl-names = "default"; - #address-cells = <1>; - #size-cells = <0>; - func { + + key-func { label = "Function Button"; linux,code = <KEY_OPTION>; gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; }; - power { + key-power { label = "Power-on Switch"; linux,input-type = <5>; /* EV_SW */ linux,code = <KEY_RESERVED>; /* LSMINI_SW_POWER */ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>; }; - autopower { + key-autopower { label = "Power-auto Switch"; linux,input-type = <5>; /* EV_SW */ linux,code = <KEY_ESC>; /* LSMINI_SW_AUTOPOWER */ @@ -103,24 +102,24 @@ &pmx_led_power>; pinctrl-names = "default"; - alarm { + led-alarm { label = "lswsgl:alarm:red"; - gpio = <&gpio0 2 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; }; - info { + led-info { label = "lswsgl:info:amber"; - gpio = <&gpio0 3 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; }; - func { + led-func { label = "lswsgl:func:blue:top"; - gpio = <&gpio0 9 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 9 GPIO_ACTIVE_LOW>; }; - power { + led-power { label = "lswsgl:power:blue:bottom"; - gpio = <&gpio0 14 GPIO_ACTIVE_LOW>; + gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; default-state = "on"; }; }; diff --git a/arch/arm/boot/dts/marvell/orion5x-maxtor-shared-storage-2.dts b/arch/arm/boot/dts/marvell/orion5x-maxtor-shared-storage-2.dts index d57859998350..cb1bd24b7ae3 100644 --- a/arch/arm/boot/dts/marvell/orion5x-maxtor-shared-storage-2.dts +++ b/arch/arm/boot/dts/marvell/orion5x-maxtor-shared-storage-2.dts @@ -35,15 +35,14 @@ compatible = "gpio-keys"; pinctrl-0 = <&pmx_buttons>; pinctrl-names = "default"; - #address-cells = <1>; - #size-cells = <0>; - power { + + key-power { label = "Power"; linux,code = <KEY_POWER>; gpios = <&gpio0 11 GPIO_ACTIVE_LOW>; }; - reset { + key-reset { label = "Reset"; linux,code = <KEY_RESTART>; gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/marvell/orion5x-netgear-wnr854t.dts b/arch/arm/boot/dts/marvell/orion5x-netgear-wnr854t.dts index fb203e7d37f5..d63ea15539aa 100644 --- a/arch/arm/boot/dts/marvell/orion5x-netgear-wnr854t.dts +++ b/arch/arm/boot/dts/marvell/orion5x-netgear-wnr854t.dts @@ -35,7 +35,7 @@ pinctrl-0 = <&pmx_reset_button>; pinctrl-names = "default"; - reset { + key-reset { label = "Reset Button"; linux,code = <KEY_RESTART>; gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; diff --git a/arch/arm/boot/dts/marvell/orion5x-rd88f5182-nas.dts b/arch/arm/boot/dts/marvell/orion5x-rd88f5182-nas.dts index fd78aa02a3c5..75ab913b21e5 100644 --- a/arch/arm/boot/dts/marvell/orion5x-rd88f5182-nas.dts +++ b/arch/arm/boot/dts/marvell/orion5x-rd88f5182-nas.dts @@ -32,7 +32,7 @@ pinctrl-0 = <&pmx_debug_led>; pinctrl-names = "default"; - led@0 { + led-0 { label = "rd88f5182:cpu"; linux,default-trigger = "heartbeat"; gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>; diff --git a/arch/arm/boot/dts/mediatek/mt2701-evb.dts b/arch/arm/boot/dts/mediatek/mt2701-evb.dts index 9c7325f18933..4c76366aa938 100644 --- a/arch/arm/boot/dts/mediatek/mt2701-evb.dts +++ b/arch/arm/boot/dts/mediatek/mt2701-evb.dts @@ -231,7 +231,7 @@ <MT2701_PIN_238_EXT_SDIO1__FUNC_EXT_SDIO1>, <MT2701_PIN_237_EXT_SDIO2__FUNC_EXT_SDIO2>, <MT2701_PIN_236_EXT_SDIO3__FUNC_EXT_SDIO3>; - drive-strength = <MTK_DRIVE_4mA>; + drive-strength = <4>; bias-pull-up; }; }; diff --git a/arch/arm/boot/dts/mediatek/mt7623.dtsi b/arch/arm/boot/dts/mediatek/mt7623.dtsi index f0b4a09004b3..814586abc297 100644 --- a/arch/arm/boot/dts/mediatek/mt7623.dtsi +++ b/arch/arm/boot/dts/mediatek/mt7623.dtsi @@ -1143,13 +1143,13 @@ <MT7623_PIN_121_MSDC0_DAT0_FUNC_MSDC0_DAT0>, <MT7623_PIN_116_MSDC0_CMD_FUNC_MSDC0_CMD>; input-enable; - drive-strength = <MTK_DRIVE_2mA>; + drive-strength = <2>; bias-pull-up = <MTK_PUPD_SET_R1R0_01>; }; pins-clk { pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_MSDC0_CLK>; - drive-strength = <MTK_DRIVE_2mA>; + drive-strength = <2>; bias-pull-down = <MTK_PUPD_SET_R1R0_01>; }; @@ -1167,14 +1167,14 @@ <MT7623_PIN_110_MSDC1_DAT3_FUNC_MSDC1_DAT3>, <MT7623_PIN_105_MSDC1_CMD_FUNC_MSDC1_CMD>; input-enable; - drive-strength = <MTK_DRIVE_4mA>; + drive-strength = <4>; bias-pull-up = <MTK_PUPD_SET_R1R0_10>; }; pins-clk { pinmux = <MT7623_PIN_106_MSDC1_CLK_FUNC_MSDC1_CLK>; bias-pull-down; - drive-strength = <MTK_DRIVE_4mA>; + drive-strength = <4>; }; pins-wp { @@ -1197,13 +1197,13 @@ <MT7623_PIN_110_MSDC1_DAT3_FUNC_MSDC1_DAT3>, <MT7623_PIN_105_MSDC1_CMD_FUNC_MSDC1_CMD>; input-enable; - drive-strength = <MTK_DRIVE_4mA>; + drive-strength = <4>; bias-pull-up = <MTK_PUPD_SET_R1R0_10>; }; pins-clk { pinmux = <MT7623_PIN_106_MSDC1_CLK_FUNC_MSDC1_CLK>; - drive-strength = <MTK_DRIVE_4mA>; + drive-strength = <4>; bias-pull-down = <MTK_PUPD_SET_R1R0_10>; }; }; @@ -1211,7 +1211,7 @@ nand_pins_default: nanddefault { pins-ale { pinmux = <MT7623_PIN_116_MSDC0_CMD_FUNC_NALE>; - drive-strength = <MTK_DRIVE_8mA>; + drive-strength = <8>; bias-pull-down = <MTK_PUPD_SET_R1R0_10>; }; @@ -1226,13 +1226,13 @@ <MT7623_PIN_115_MSDC0_RSTB_FUNC_NLD8>, <MT7623_PIN_119_MSDC0_DAT2_FUNC_NLD2>; input-enable; - drive-strength = <MTK_DRIVE_8mA>; + drive-strength = <8>; bias-pull-up; }; pins-we { pinmux = <MT7623_PIN_117_MSDC0_CLK_FUNC_NWEB>; - drive-strength = <MTK_DRIVE_8mA>; + drive-strength = <8>; bias-pull-up = <MTK_PUPD_SET_R1R0_10>; }; }; diff --git a/arch/arm/boot/dts/nspire/nspire-classic.dtsi b/arch/arm/boot/dts/nspire/nspire-classic.dtsi index a6e9cbf51524..0ee53d3ecd54 100644 --- a/arch/arm/boot/dts/nspire/nspire-classic.dtsi +++ b/arch/arm/boot/dts/nspire/nspire-classic.dtsi @@ -55,7 +55,7 @@ }; / { - memory { + memory@10000000 { device_type = "memory"; reg = <0x10000000 0x2000000>; /* 32 MB */ }; diff --git a/arch/arm/boot/dts/nspire/nspire-cx.dts b/arch/arm/boot/dts/nspire/nspire-cx.dts index 29f0181e5b38..debeff0ec010 100644 --- a/arch/arm/boot/dts/nspire/nspire-cx.dts +++ b/arch/arm/boot/dts/nspire/nspire-cx.dts @@ -122,7 +122,7 @@ model = "TI-NSPIRE CX"; compatible = "ti,nspire-cx"; - memory { + memory@10000000 { device_type = "memory"; reg = <0x10000000 0x4000000>; /* 64 MB */ }; diff --git a/arch/arm/boot/dts/nspire/nspire.dtsi b/arch/arm/boot/dts/nspire/nspire.dtsi index d56fef7250db..95588b716c6f 100644 --- a/arch/arm/boot/dts/nspire/nspire.dtsi +++ b/arch/arm/boot/dts/nspire/nspire.dtsi @@ -170,9 +170,12 @@ }; watchdog: watchdog@90060000 { - compatible = "arm,primecell"; + compatible = "arm,sp805", "arm,primecell"; reg = <0x90060000 0x1000>; interrupts = <3>; + clocks = <&apb_pclk>, <&apb_pclk>; + clock-names = "wdog_clk", "apb_pclk"; + status = "disabled"; }; rtc: rtc@90090000 { diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-kudo.dts b/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-kudo.dts index 5787ae95d3b4..1f07ba382910 100644 --- a/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-kudo.dts +++ b/arch/arm/boot/dts/nuvoton/nuvoton-npcm730-kudo.dts @@ -525,7 +525,7 @@ }; }; - i2c-bus@4 { + i2c@4 { #address-cells = <1>; #size-cells = <0>; reg = <4>; @@ -537,7 +537,7 @@ }; }; - i2c-bus@5 { + i2c@5 { #address-cells = <1>; #size-cells = <0>; reg = <5>; @@ -549,7 +549,7 @@ }; }; - i2c-bus@6 { + i2c@6 { #address-cells = <1>; #size-cells = <0>; reg = <6>; @@ -561,7 +561,7 @@ }; }; - i2c-bus@7 { + i2c@7 { #address-cells = <1>; #size-cells = <0>; reg = <7>; @@ -580,7 +580,7 @@ reg = <0x77>; i2c-mux-idle-disconnect; - i2c-bus@2 { + i2c@2 { #address-cells = <1>; #size-cells = <0>; reg = <2>; @@ -620,7 +620,7 @@ reg = <0x77>; i2c-mux-idle-disconnect; - i2c-bus@0 { + i2c@0 { #address-cells = <1>; #size-cells = <0>; reg = <0>; @@ -632,7 +632,7 @@ }; }; - i2c-bus@1 { + i2c@1 { #address-cells = <1>; #size-cells = <0>; reg = <1>; @@ -691,7 +691,7 @@ reg = <0x77>; i2c-mux-idle-disconnect; - i2c-bus@3 { + i2c@3 { #address-cells = <1>; #size-cells = <0>; reg = <3>; @@ -703,7 +703,7 @@ }; }; - i2c-bus@4 { + i2c@4 { #address-cells = <1>; #size-cells = <0>; reg = <4>; @@ -715,7 +715,7 @@ }; }; - i2c-bus@5 { + i2c@5 { #address-cells = <1>; #size-cells = <0>; reg = <5>; @@ -726,7 +726,7 @@ reg = <0x28>; }; }; - i2c-bus@6 { + i2c@6 { #address-cells = <1>; #size-cells = <0>; reg = <6>; diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-runbmc-olympus.dts b/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-runbmc-olympus.dts index baa39d0c1032..087f4ac43187 100644 --- a/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-runbmc-olympus.dts +++ b/arch/arm/boot/dts/nuvoton/nuvoton-npcm750-runbmc-olympus.dts @@ -215,43 +215,43 @@ reg = <0x70>; i2c-mux-idle-disconnect; - i2c_slot1a: i2c-bus@0 { + i2c_slot1a: i2c@0 { #address-cells = <1>; #size-cells = <0>; reg = <0>; }; - i2c_slot1b: i2c-bus@1 { + i2c_slot1b: i2c@1 { #address-cells = <1>; #size-cells = <0>; reg = <1>; }; - i2c_slot2a: i2c-bus@2 { + i2c_slot2a: i2c@2 { #address-cells = <1>; #size-cells = <0>; reg = <2>; }; - i2c_slot2b: i2c-bus@3 { + i2c_slot2b: i2c@3 { #address-cells = <1>; #size-cells = <0>; reg = <3>; }; - i2c_slot3: i2c-bus@4 { + i2c_slot3: i2c@4 { #address-cells = <1>; #size-cells = <0>; reg = <4>; }; - i2c_slot4: i2c-bus@5 { + i2c_slot4: i2c@5 { #address-cells = <1>; #size-cells = <0>; reg = <5>; }; - i2c_slot5: i2c-bus@6 { + i2c_slot5: i2c@6 { #address-cells = <1>; #size-cells = <0>; reg = <6>; @@ -265,24 +265,24 @@ #size-cells = <0>; i2c-mux-idle-disconnect; - i2c_m2_s1: i2c-bus@0 { + i2c_m2_s1: i2c@0 { #address-cells = <1>; #size-cells = <0>; reg = <0>; }; - i2c_m2_s2: i2c-bus@1 { + i2c_m2_s2: i2c@1 { #address-cells = <1>; #size-cells = <0>; reg = <1>; }; - i2c_m2_s3: i2c-bus@2 { + i2c_m2_s3: i2c@2 { #address-cells = <1>; #size-cells = <0>; reg = <2>; }; - i2c_m2_s4: i2c-bus@3 { + i2c_m2_s4: i2c@3 { #address-cells = <1>; #size-cells = <0>; reg = <3>; diff --git a/arch/arm/boot/dts/nxp/imx/Makefile b/arch/arm/boot/dts/nxp/imx/Makefile index 231c0d73a53e..92e291603ea1 100644 --- a/arch/arm/boot/dts/nxp/imx/Makefile +++ b/arch/arm/boot/dts/nxp/imx/Makefile @@ -99,6 +99,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6dl-icore.dtb \ imx6dl-icore-mipi.dtb \ imx6dl-icore-rqs.dtb \ + imx6dl-kontron-samx6i-ads2.dtb \ imx6dl-lanmcu.dtb \ imx6dl-mamoj.dtb \ imx6dl-mba6a.dtb \ @@ -207,6 +208,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ imx6q-icore-ofcap10.dtb \ imx6q-icore-ofcap12.dtb \ imx6q-icore-rqs.dtb \ + imx6q-kontron-samx6i-ads2.dtb \ imx6q-kp-tpc.dtb \ imx6q-logicpd.dtb \ imx6q-marsboard.dtb \ diff --git a/arch/arm/boot/dts/nxp/imx/e60k02.dtsi b/arch/arm/boot/dts/nxp/imx/e60k02.dtsi index 13756d39fb7b..0029c12f16c8 100644 --- a/arch/arm/boot/dts/nxp/imx/e60k02.dtsi +++ b/arch/arm/boot/dts/nxp/imx/e60k02.dtsi @@ -14,6 +14,10 @@ #include <dt-bindings/input/input.h> / { + aliases { + mmc0 = &usdhc2; + mmc1 = &usdhc3; + }; chosen { stdout-path = &uart1; diff --git a/arch/arm/boot/dts/nxp/imx/imx51-apf51dev.dts b/arch/arm/boot/dts/nxp/imx/imx51-apf51dev.dts index b61d55ca1467..de6b7607510a 100644 --- a/arch/arm/boot/dts/nxp/imx/imx51-apf51dev.dts +++ b/arch/arm/boot/dts/nxp/imx/imx51-apf51dev.dts @@ -25,8 +25,8 @@ pinctrl-0 = <&pinctrl_ipu_disp1>; display-timings { - lw700 { - native-mode; + native-mode = <&timing0>; + timing0: timing-lw700 { clock-frequency = <33000033>; hactive = <800>; vactive = <480>; diff --git a/arch/arm/boot/dts/nxp/imx/imx51-babbage.dts b/arch/arm/boot/dts/nxp/imx/imx51-babbage.dts index 16ff543f3fbf..f4a47e8348b2 100644 --- a/arch/arm/boot/dts/nxp/imx/imx51-babbage.dts +++ b/arch/arm/boot/dts/nxp/imx/imx51-babbage.dts @@ -89,7 +89,7 @@ status = "disabled"; display-timings { native-mode = <&timing1>; - timing1: claawvga { + timing1: timing-claawvga { clock-frequency = <27000000>; hactive = <800>; vactive = <480>; diff --git a/arch/arm/boot/dts/nxp/imx/imx51-ts4800.dts b/arch/arm/boot/dts/nxp/imx/imx51-ts4800.dts index 2bd0761c7e90..079bd3d14999 100644 --- a/arch/arm/boot/dts/nxp/imx/imx51-ts4800.dts +++ b/arch/arm/boot/dts/nxp/imx/imx51-ts4800.dts @@ -58,8 +58,8 @@ pinctrl-0 = <&pinctrl_lcd>; display-timings { - 800x480p60 { - native-mode; + native-mode = <&timing0>; + timing0: timing-800x480p60 { clock-frequency = <30066000>; hactive = <800>; vactive = <480>; diff --git a/arch/arm/boot/dts/nxp/imx/imx53-m53evk.dts b/arch/arm/boot/dts/nxp/imx/imx53-m53evk.dts index 1353d985969c..ba0c62994f75 100644 --- a/arch/arm/boot/dts/nxp/imx/imx53-m53evk.dts +++ b/arch/arm/boot/dts/nxp/imx/imx53-m53evk.dts @@ -17,8 +17,8 @@ pinctrl-0 = <&pinctrl_ipu_disp1>; display-timings { - 800x480p60 { - native-mode; + native-mode = <&timing0>; + timing0: timing-800x480p60 { clock-frequency = <31500000>; hactive = <800>; vactive = <480>; diff --git a/arch/arm/boot/dts/nxp/imx/imx53-m53menlo.dts b/arch/arm/boot/dts/nxp/imx/imx53-m53menlo.dts index 4d77b6077fc1..558751e730f3 100644 --- a/arch/arm/boot/dts/nxp/imx/imx53-m53menlo.dts +++ b/arch/arm/boot/dts/nxp/imx/imx53-m53menlo.dts @@ -64,6 +64,7 @@ reg = <0>; lvds_decoder_in: endpoint { + data-mapping = "jeida-18"; remote-endpoint = <&lvds0_out>; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx53-tx53-x03x.dts b/arch/arm/boot/dts/nxp/imx/imx53-tx53-x03x.dts index a7f77527269d..a02d77bb5672 100644 --- a/arch/arm/boot/dts/nxp/imx/imx53-tx53-x03x.dts +++ b/arch/arm/boot/dts/nxp/imx/imx53-tx53-x03x.dts @@ -67,7 +67,7 @@ }; display-timings { - VGA { + timing-vga { clock-frequency = <25200000>; hactive = <640>; vactive = <480>; @@ -83,7 +83,7 @@ pixelclk-active = <0>; }; - ETV570 { + timing-etc570 { clock-frequency = <25200000>; hactive = <640>; vactive = <480>; @@ -99,7 +99,7 @@ pixelclk-active = <0>; }; - ET0350 { + timing-et0350 { clock-frequency = <6413760>; hactive = <320>; vactive = <240>; @@ -115,7 +115,7 @@ pixelclk-active = <0>; }; - ET0430 { + timing-et0430 { clock-frequency = <9009000>; hactive = <480>; vactive = <272>; @@ -131,7 +131,7 @@ pixelclk-active = <1>; }; - ET0500 { + timing-et0500 { clock-frequency = <33264000>; hactive = <800>; vactive = <480>; @@ -147,7 +147,7 @@ pixelclk-active = <0>; }; - ET0700 { /* same as ET0500 */ + timing-et0700 { /* same as ET0500 */ clock-frequency = <33264000>; hactive = <800>; vactive = <480>; @@ -163,7 +163,7 @@ pixelclk-active = <0>; }; - ETQ570 { + timing-etq570 { clock-frequency = <6596040>; hactive = <320>; vactive = <240>; diff --git a/arch/arm/boot/dts/nxp/imx/imx53-tx53-x13x.dts b/arch/arm/boot/dts/nxp/imx/imx53-tx53-x13x.dts index 6cdf2082c742..e10c179dbdb3 100644 --- a/arch/arm/boot/dts/nxp/imx/imx53-tx53-x13x.dts +++ b/arch/arm/boot/dts/nxp/imx/imx53-tx53-x13x.dts @@ -191,7 +191,7 @@ display-timings { native-mode = <&lvds0_timing0>; - lvds0_timing0: hsd100pxn1 { + lvds0_timing0: timing-hsd100pxn1 { clock-frequency = <65000000>; hactive = <1024>; vactive = <768>; @@ -207,7 +207,7 @@ pixelclk-active = <1>; }; - lvds0_timing1: nl12880bc20 { + lvds0_timing1: timing-nl12880bc20 { clock-frequency = <71000000>; hactive = <1280>; vactive = <800>; @@ -233,7 +233,7 @@ display-timings { native-mode = <&lvds1_timing0>; - lvds1_timing0: hsd100pxn1 { + lvds1_timing0: timing-hsd100pxn1 { clock-frequency = <65000000>; hactive = <1024>; vactive = <768>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_4.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_4.dts index dfa6f64d43cc..c9b2ea2b24b2 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_4.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_4.dts @@ -82,11 +82,10 @@ compatible = "lg,lg4573"; spi-max-frequency = <10000000>; reg = <0>; - power-on-delay = <10>; display-timings { - 480x800p57 { - native-mode; + native-mode = <&timing0>; + timing0: timing-480x800p57 { clock-frequency = <27000027>; hactive = <480>; vactive = <800>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos_4.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos_4.dts index a5ac79346854..9ec038f1d0ff 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos_4.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos_4.dts @@ -36,8 +36,8 @@ status = "okay"; display-timings { - 480x800p60 { - native-mode; + native-mode = <&timing0>; + timing0: timing-480x800p60 { clock-frequency = <30000000>; hactive = <480>; vactive = <800>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos_7.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos_7.dts index 5a25bdbbeb68..b3129832f471 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos_7.dts +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos_7.dts @@ -25,8 +25,8 @@ status = "okay"; display-timings { - 800x480p60 { - native-mode; + native-mode = <&timing0>; + timing0: timing-800x480p60 { clock-frequency = <33246000>; hactive = <800>; vactive = <480>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-kontron-samx6i-ads2.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-kontron-samx6i-ads2.dts new file mode 100644 index 000000000000..6a0c53f23a15 --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-kontron-samx6i-ads2.dts @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 + +/dts-v1/; + +#include "imx6dl.dtsi" +#include "imx6qdl-kontron-samx6i.dtsi" +#include "imx6qdl-kontron-samx6i-ads2.dtsi" + +/ { + model = "Kontron SMARC-sAMX6i Dual-Lite/Solo on SMARC Eval 2.0 carrier"; + compatible = "kontron,imx6dl-samx6i-ads2", "kontron,imx6dl-samx6i", "fsl,imx6dl"; +}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-kontron-samx6i.dtsi b/arch/arm/boot/dts/nxp/imx/imx6dl-kontron-samx6i.dtsi index a864fdbd5f16..5a9b819d7ee8 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6dl-kontron-samx6i.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6dl-kontron-samx6i.dtsi @@ -7,6 +7,6 @@ #include "imx6qdl-kontron-samx6i.dtsi" / { - model = "Kontron SMARC sAMX6i Dual-Lite/Solo"; + model = "Kontron SMARC-sAMX6i Dual-Lite/Solo"; compatible = "kontron,imx6dl-samx6i", "fsl,imx6dl"; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-kontron-samx6i-ads2.dts b/arch/arm/boot/dts/nxp/imx/imx6q-kontron-samx6i-ads2.dts new file mode 100644 index 000000000000..94c395cc020e --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6q-kontron-samx6i-ads2.dts @@ -0,0 +1,12 @@ +// SPDX-License-Identifier: GPL-2.0 OR X11 + +/dts-v1/; + +#include "imx6q.dtsi" +#include "imx6qdl-kontron-samx6i.dtsi" +#include "imx6qdl-kontron-samx6i-ads2.dtsi" + +/ { + model = "Kontron SMARC-sAMX6i Quad/Dual on SMARC Eval 2.0 carrier"; + compatible = "kontron,imx6q-samx6i-ads2", "kontron,imx6q-samx6i", "fsl,imx6q"; +}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-kontron-samx6i.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q-kontron-samx6i.dtsi index 4d6a0c3e8455..e76963436079 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6q-kontron-samx6i.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6q-kontron-samx6i.dtsi @@ -5,31 +5,8 @@ #include "imx6q.dtsi" #include "imx6qdl-kontron-samx6i.dtsi" -#include <dt-bindings/gpio/gpio.h> / { - model = "Kontron SMARC sAMX6i Quad/Dual"; + model = "Kontron SMARC-sAMX6i Quad/Dual"; compatible = "kontron,imx6q-samx6i", "fsl,imx6q"; }; - -/* Quad/Dual SoMs have 3 chip-select signals */ -&ecspi4 { - cs-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>, - <&gpio3 29 GPIO_ACTIVE_LOW>, - <&gpio3 25 GPIO_ACTIVE_LOW>; -}; - -&pinctrl_ecspi4 { - fsl,pins = < - MX6QDL_PAD_EIM_D21__ECSPI4_SCLK 0x100b1 - MX6QDL_PAD_EIM_D28__ECSPI4_MOSI 0x100b1 - MX6QDL_PAD_EIM_D22__ECSPI4_MISO 0x100b1 - - /* SPI4_IMX_CS2# - connected to internal flash */ - MX6QDL_PAD_EIM_D24__GPIO3_IO24 0x1b0b0 - /* SPI4_IMX_CS0# - connected to SMARC SPI0_CS0# */ - MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b0 - /* SPI4_CS3# - connected to SMARC SPI0_CS1# */ - MX6QDL_PAD_EIM_D25__GPIO3_IO25 0x1b0b0 - >; -}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw52xx.dtsi index 48ffb3ee01bd..082a2e3a391f 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw52xx.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw52xx.dtsi @@ -485,7 +485,7 @@ display-timings { native-mode = <&timing0>; - timing0: hsd100pxn1 { + timing0: timing-hsd100pxn1 { clock-frequency = <65000000>; hactive = <1024>; vactive = <768>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw53xx.dtsi index 1eae438fbdae..8ec442038ea0 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw53xx.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw53xx.dtsi @@ -482,7 +482,7 @@ display-timings { native-mode = <&timing0>; - timing0: hsd100pxn1 { + timing0: timing-hsd100pxn1 { clock-frequency = <65000000>; hactive = <1024>; vactive = <768>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw54xx.dtsi index c2ec8572c8a5..9df9f79affae 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw54xx.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw54xx.dtsi @@ -529,7 +529,7 @@ display-timings { native-mode = <&timing0>; - timing0: hsd100pxn1 { + timing0: timing-hsd100pxn1 { clock-frequency = <65000000>; hactive = <1024>; vactive = <768>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw560x.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw560x.dtsi index 7cee983da669..7693f92195d5 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw560x.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw560x.dtsi @@ -584,7 +584,7 @@ display-timings { native-mode = <&timing0>; - timing0: hsd100pxn1 { + timing0: timing-hsd100pxn1 { clock-frequency = <65000000>; hactive = <1024>; vactive = <768>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5903.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5903.dtsi index fbc704c064b6..9d0836df0fed 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5903.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5903.dtsi @@ -486,7 +486,7 @@ display-timings { native-mode = <&timing0>; - timing0: g101evn010 { + timing0: timing-g101evn010 { clock-frequency = <68930000>; hactive = <1280>; vactive = <800>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5904.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5904.dtsi index 070506279186..f4cb9e1d34a9 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5904.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5904.dtsi @@ -551,7 +551,7 @@ display-timings { native-mode = <&timing0>; - timing0: hsd100pxn1 { + timing0: timing-hsd100pxn1 { clock-frequency = <65000000>; hactive = <1024>; vactive = <768>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-kontron-samx6i-ads2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-kontron-samx6i-ads2.dtsi new file mode 100644 index 000000000000..b4a79245b7b6 --- /dev/null +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-kontron-samx6i-ads2.dtsi @@ -0,0 +1,148 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Device Tree include for the Kontron SMARC-sAMX6i board on a SMARC Eval + * 2.0 carrier (ADS2). + * + */ + +/ { + chosen { + stdout-path = "serial0:115200n8"; + }; + + sound { + #address-cells = <1>; + #size-cells = <0>; + compatible = "simple-audio-card"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&dailink_master>; + simple-audio-card,frame-master = <&dailink_master>; + simple-audio-card,widgets = + "Headphone", "Headphone Jack", + "Line", "Line Out Jack", + "Microphone", "Microphone Jack", + "Line", "Line In Jack"; + simple-audio-card,routing = + "Line Out Jack", "LINEOUTR", + "Line Out Jack", "LINEOUTL", + "Headphone Jack", "HPOUTR", + "Headphone Jack", "HPOUTL", + "IN1L", "Line In Jack", + "IN1R", "Line In Jack", + "Microphone Jack", "MICBIAS", + "IN2L", "Microphone Jack", + "IN2R", "Microphone Jack"; + + simple-audio-card,cpu { + sound-dai = <&ssi1>; + }; + + dailink_master: simple-audio-card,codec { + sound-dai = <&wm8904>; + }; + }; + + reg_codec_mic: regulator-codec-mic { + compatible = "regulator-fixed"; + regulator-name = "V_3V3_MIC"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_codec_1p8v: regulator-codec-1p8v { + compatible = "regulator-fixed"; + regulator-name = "V_1V8_S0_CODEC"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&audmux { + status = "okay"; +}; + +&can1 { + status = "okay"; +}; + +&can2 { + status = "okay"; +}; + +&ecspi4 { + flash@1 { + compatible = "jedec,spi-nor"; + reg = <1>; + spi-max-frequency = <100000000>; + m25p,fast-read; + }; +}; + +&fec { + status = "okay"; +}; + +&i2c1 { + status = "okay"; + + wm8904: audio-codec@1a { + compatible = "wlf,wm8904"; + reg = <0x1a>; + #sound-dai-cells = <0>; + clocks = <&clks IMX6QDL_CLK_CKO2>; + clock-names = "mclk"; + AVDD-supply = <®_codec_1p8v>; + CPVDD-supply = <®_codec_1p8v>; + DBVDD-supply = <®_codec_1p8v>; + DCVDD-supply = <®_codec_1p8v>; + MICVDD-supply = <®_codec_mic>; + }; +}; + +&i2c3 { + eeprom@57 { + compatible = "atmel,24c64"; + reg = <0x57>; + pagesize = <32>; + }; +}; + +&pcie { + status = "okay"; +}; + +&ssi1 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&uart4 { + status = "okay"; +}; + +&uart5 { + status = "okay"; +}; + +&usbh1 { + status = "okay"; +}; + +&usbotg { + status = "okay"; +}; + +&usdhc3 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-kontron-samx6i.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-kontron-samx6i.dtsi index 85aeebc9485d..99b5e78458aa 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-kontron-samx6i.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-kontron-samx6i.dtsi @@ -61,6 +61,18 @@ vin-supply = <®_smarc_suppy>; }; + reg_sdio: regulator-sdio { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_reg_sdio>; + regulator-name = "V_3V3_SD"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio1 29 GPIO_ACTIVE_HIGH>; + enable-active-high; + off-on-delay-us = <20000>; + }; + reg_smarc_lcdbklt: regulator-smarc-lcdbklt { compatible = "regulator-fixed"; pinctrl-names = "default"; @@ -137,7 +149,7 @@ status = "disabled"; }; - i2c_intern: i2c-gpio-intern { + i2c_intern: i2c-0 { compatible = "i2c-gpio"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c_gpio_intern>; @@ -148,7 +160,7 @@ #size-cells = <0>; }; - i2c_lcd: i2c-gpio-lcd { + i2c_lcd: i2c-1 { compatible = "i2c-gpio"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c_gpio_lcd>; @@ -160,7 +172,7 @@ status = "disabled"; }; - i2c_cam: i2c-gpio-cam { + i2c_cam: i2c-2 { compatible = "i2c-gpio"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c_gpio_cam>; @@ -178,7 +190,7 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_audmux>; - audmux_ssi1 { + mux-ssi1 { fsl,audmux-port = <MX51_AUDMUX_PORT1_SSI0>; fsl,port-config = < (IMX_AUDMUX_V2_PTCR_TFSEL(MX51_AUDMUX_PORT3) | @@ -190,7 +202,7 @@ >; }; - audmux_adu3 { + mux-aud3 { fsl,audmux-port = <MX51_AUDMUX_PORT3>; fsl,port-config = < IMX_AUDMUX_V2_PTCR_SYN @@ -198,7 +210,7 @@ >; }; - audmux_ssi2 { + mux-ssi2 { fsl,audmux-port = <MX51_AUDMUX_PORT2_SSI1>; fsl,port-config = < (IMX_AUDMUX_V2_PTCR_TFSEL(MX51_AUDMUX_PORT4) | @@ -210,7 +222,7 @@ >; }; - audmux_adu4 { + mux-aud4 { fsl,audmux-port = <MX51_AUDMUX_PORT4>; fsl,port-config = < IMX_AUDMUX_V2_PTCR_SYN @@ -244,7 +256,8 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi4>; cs-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>, - <&gpio3 29 GPIO_ACTIVE_LOW>; + <&gpio3 29 GPIO_ACTIVE_LOW>, + <&gpio3 25 GPIO_ACTIVE_LOW>; status = "okay"; /* default boot source: workaround #1 for errata ERR006282 */ @@ -259,7 +272,7 @@ &fec { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet>; - phy-mode = "rgmii"; + phy-connection-type = "rgmii-id"; phy-handle = <ðphy>; mdio { @@ -269,7 +282,7 @@ ethphy: ethernet-phy@1 { compatible = "ethernet-phy-ieee802.3-c22"; reg = <1>; - reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; reset-assert-us = <1000>; }; }; @@ -356,10 +369,6 @@ regulator-always-on; }; - /* - * Per schematics, of all VGEN's, only VGEN5 has some - * usage ... but even that - over DNI resistor - */ vgen1 { regulator-min-microvolt = <800000>; regulator-max-microvolt = <1550000>; @@ -380,8 +389,7 @@ regulator-max-microvolt = <3300000>; }; - reg_2p5v_s0: vgen5 { - regulator-name = "V_2V5_S0"; + vgen5 { regulator-min-microvolt = <1800000>; regulator-max-microvolt = <3300000>; }; @@ -464,6 +472,8 @@ MX6QDL_PAD_EIM_D24__GPIO3_IO24 0x1b0b0 /* SPI_IMX_CS0# - connected to SMARC SPI0_CS0# */ MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b0 + /* SPI4_CS3# - connected to SMARC SPI0_CS1# */ + MX6QDL_PAD_EIM_D25__GPIO3_IO25 0x1b0b0 >; }; @@ -516,7 +526,7 @@ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 - MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0 /* RST_GBE0_PHY# */ + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x1b0b0 /* RST_GBE0_PHY# */ >; }; @@ -642,6 +652,12 @@ >; }; + pinctrl_reg_sdio: reg-sdiogrp { + fsl,pins = < + MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* SDIO_PWR_EN */ + >; + }; + pinctrl_uart1: uart1grp { fsl,pins = < MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 @@ -694,7 +710,6 @@ MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x1b0b0 /* CD */ MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b0 /* WP */ - MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PWR_EN */ >; }; @@ -728,8 +743,7 @@ &pcie { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_pcie>; - wake-up-gpio = <&gpio6 18 GPIO_ACTIVE_HIGH>; - reset-gpio = <&gpio3 13 GPIO_ACTIVE_HIGH>; + reset-gpio = <&gpio3 13 GPIO_ACTIVE_LOW>; }; /* LCD_BKLT_PWM */ @@ -797,12 +811,12 @@ pinctrl-0 = <&pinctrl_usdhc3>; cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>; wp-gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; + vmmc-supply = <®_sdio>; no-1-8-v; }; /* SDMMC */ &usdhc4 { - /* Internal eMMC, optional on some boards */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usdhc4>; bus-width = <8>; @@ -811,11 +825,13 @@ non-removable; vmmc-supply = <®_3p3v_s0>; vqmmc-supply = <®_1p8v_s0>; + status = "okay"; }; &wdog1 { /* CPLD is feeded by watchdog (hardwired) */ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_wdog1>; + fsl,ext-reset-output; status = "okay"; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6a.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6a.dtsi index 238f3af42822..807f3c95e3ce 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6a.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6a.dtsi @@ -22,12 +22,16 @@ compatible = "atmel,24c64"; reg = <0x57>; pagesize = <32>; - #address-cells = <1>; - #size-cells = <1>; vcc-supply = <®_mba6_3p3v>; - mba_mac_address: mac-address@20 { - reg = <0x20 0x6>; + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + mba_mac_address: mac-address@20 { + reg = <0x20 0x6>; + }; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6b.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6b.dtsi index a587bc88f76f..789733a45b95 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6b.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-mba6b.dtsi @@ -32,12 +32,16 @@ compatible = "atmel,24c64"; reg = <0x57>; pagesize = <32>; - #address-cells = <1>; - #size-cells = <1>; vcc-supply = <®_mba6_3p3v>; - mba_mac_address: mac-address@20 { - reg = <0x20 0x6>; + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + mba_mac_address: mac-address@20 { + reg = <0x20 0x6>; + }; }; }; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi index 6656e2e762a1..0a3deaf92eea 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi @@ -786,7 +786,7 @@ display-timings { native-mode = <&timing0>; - timing0: hsd100pxn1 { + timing0: timing-hsd100pxn1 { clock-frequency = <65000000>; hactive = <1024>; vactive = <768>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-lcd.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-lcd.dtsi index 79f2354886b7..ded241a39906 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-lcd.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-lcd.dtsi @@ -110,7 +110,7 @@ }; display-timings { - VGA { + timing-vga { clock-frequency = <25200000>; hactive = <640>; vactive = <480>; @@ -126,8 +126,7 @@ pixelclk-active = <0>; }; - ETV570 { - u-boot,panel-name = "edt,et057090dhu"; + timing-etv570 { clock-frequency = <25200000>; hactive = <640>; vactive = <480>; @@ -143,8 +142,7 @@ pixelclk-active = <0>; }; - ET0350 { - u-boot,panel-name = "edt,et0350g0dh6"; + timing-et0350 { clock-frequency = <6413760>; hactive = <320>; vactive = <240>; @@ -160,8 +158,7 @@ pixelclk-active = <0>; }; - ET0430 { - u-boot,panel-name = "edt,et0430g0dh6"; + timing-et0430 { clock-frequency = <9009000>; hactive = <480>; vactive = <272>; @@ -177,7 +174,7 @@ pixelclk-active = <1>; }; - ET0500 { + timing-et0500 { clock-frequency = <33264000>; hactive = <800>; vactive = <480>; @@ -193,8 +190,7 @@ pixelclk-active = <0>; }; - ET0700 { /* same as ET0500 */ - u-boot,panel-name = "edt,etm0700g0dh6"; + timing-et0700 { /* same as ET0500 */ clock-frequency = <33264000>; hactive = <800>; vactive = <480>; @@ -210,7 +206,7 @@ pixelclk-active = <0>; }; - ETQ570 { + timing-etq570 { clock-frequency = <6596040>; hactive = <320>; vactive = <240>; @@ -226,8 +222,7 @@ pixelclk-active = <0>; }; - CoMTFT { /* same as ET0700 but with inverted pixel clock */ - u-boot,panel-name = "edt,etm0700g0edh6"; + timing-comtft { /* same as ET0700 but with inverted pixel clock */ clock-frequency = <33264000>; hactive = <800>; vactive = <480>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-lvds.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-lvds.dtsi index 2ca2eb37e14f..4eb53d5677a6 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-lvds.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6-lvds.dtsi @@ -127,8 +127,7 @@ }; display-timings { - hsd100pxn1 { - u-boot,panel-name = "hannstar,hsd100pxn1"; + timing-hsd100pxn1 { clock-frequency = <65000000>; hactive = <1024>; vactive = <768>; @@ -142,7 +141,7 @@ pixelclk-active = <1>; }; - VGA { + timing-vga { clock-frequency = <25200000>; hactive = <640>; vactive = <480>; @@ -158,8 +157,7 @@ pixelclk-active = <0>; }; - nl12880bc20 { - u-boot,panel-name = "nlt,nl12880bc20-spwg-24"; + timing-nl12880bc20 { clock-frequency = <71000000>; hactive = <1280>; vactive = <800>; @@ -175,8 +173,7 @@ pixelclk-active = <1>; }; - ET0700 { - u-boot,panel-name = "edt,etm0700g0dh6"; + timing-et0700 { clock-frequency = <33264000>; hactive = <800>; vactive = <480>; @@ -192,8 +189,7 @@ pixelclk-active = <0>; }; - ETV570 { - u-boot,panel-name = "edt,et057090dhu"; + timing-etv570 { clock-frequency = <25200000>; hactive = <640>; vactive = <480>; @@ -224,7 +220,7 @@ }; display-timings { - hsd100pxn1 { + timing-hsd100pxn1 { clock-frequency = <65000000>; hactive = <1024>; vactive = <768>; @@ -238,7 +234,7 @@ pixelclk-active = <1>; }; - VGA { + timing-vga { clock-frequency = <25200000>; hactive = <640>; vactive = <480>; @@ -254,7 +250,7 @@ pixelclk-active = <0>; }; - nl12880bc20 { + timing-nl12880bc20 { clock-frequency = <71000000>; hactive = <1280>; vactive = <800>; diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul.dtsi index 1db146ac1c17..864173e30709 100644 --- a/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul.dtsi +++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul.dtsi @@ -405,7 +405,7 @@ status = "okay"; display-timings { - VGA { + timing-vga { clock-frequency = <25200000>; hactive = <640>; vactive = <480>; @@ -421,7 +421,7 @@ pixelclk-active = <1>; }; - ETV570 { + timing-etv570 { clock-frequency = <25200000>; hactive = <640>; vactive = <480>; @@ -437,7 +437,7 @@ pixelclk-active = <1>; }; - ET0350 { + timing-et0350 { clock-frequency = <6413760>; hactive = <320>; vactive = <240>; @@ -453,7 +453,7 @@ pixelclk-active = <1>; }; - ET0430 { + timing-et0430 { clock-frequency = <9009000>; hactive = <480>; vactive = <272>; @@ -469,7 +469,7 @@ pixelclk-active = <0>; }; - ET0500 { + timing-et0500 { clock-frequency = <33264000>; hactive = <800>; vactive = <480>; @@ -485,7 +485,7 @@ pixelclk-active = <1>; }; - ET0700 { /* same as ET0500 */ + timing-et0700 { /* same as ET0500 */ clock-frequency = <33264000>; hactive = <800>; vactive = <480>; @@ -501,7 +501,7 @@ pixelclk-active = <1>; }; - ETQ570 { + timing-etq570 { clock-frequency = <6596040>; hactive = <320>; vactive = <240>; diff --git a/arch/arm/boot/dts/nxp/mxs/imx28-tx28.dts b/arch/arm/boot/dts/nxp/mxs/imx28-tx28.dts index 5485fe118dc4..d38183edf0fd 100644 --- a/arch/arm/boot/dts/nxp/mxs/imx28-tx28.dts +++ b/arch/arm/boot/dts/nxp/mxs/imx28-tx28.dts @@ -323,7 +323,6 @@ display-timings { native-mode = <&timing5>; timing0: timing0 { - panel-name = "VGA"; clock-frequency = <25175000>; hactive = <640>; vactive = <480>; @@ -340,7 +339,6 @@ }; timing1: timing1 { - panel-name = "ETV570"; clock-frequency = <25175000>; hactive = <640>; vactive = <480>; @@ -357,7 +355,6 @@ }; timing2: timing2 { - panel-name = "ET0350"; clock-frequency = <6500000>; hactive = <320>; vactive = <240>; @@ -374,7 +371,6 @@ }; timing3: timing3 { - panel-name = "ET0430"; clock-frequency = <9000000>; hactive = <480>; vactive = <272>; @@ -391,7 +387,6 @@ }; timing4: timing4 { - panel-name = "ET0500", "ET0700"; clock-frequency = <33260000>; hactive = <800>; vactive = <480>; @@ -408,7 +403,6 @@ }; timing5: timing5 { - panel-name = "ETQ570"; clock-frequency = <6400000>; hactive = <320>; vactive = <240>; diff --git a/arch/arm/boot/dts/qcom/Makefile b/arch/arm/boot/dts/qcom/Makefile index e2e922bdc9e9..f06c6d425e91 100644 --- a/arch/arm/boot/dts/qcom/Makefile +++ b/arch/arm/boot/dts/qcom/Makefile @@ -6,6 +6,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-apq8026-huawei-sturgeon.dtb \ qcom-apq8026-lg-lenok.dtb \ qcom-apq8026-samsung-matisse-wifi.dtb \ + qcom-apq8026-samsung-milletwifi.dtb \ qcom-apq8060-dragonboard.dtb \ qcom-apq8064-cm-qs600.dtb \ qcom-apq8064-ifc6410.dtb \ @@ -27,6 +28,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-msm8226-microsoft-dempsey.dtb \ qcom-msm8226-microsoft-makepeace.dtb \ qcom-msm8226-microsoft-moneypenny.dtb \ + qcom-msm8226-samsung-ms013g.dtb \ qcom-msm8226-samsung-s3ve3g.dtb \ qcom-msm8660-surf.dtb \ qcom-msm8916-samsung-e5.dtb \ @@ -41,12 +43,15 @@ dtb-$(CONFIG_ARCH_QCOM) += \ qcom-msm8960-cdp.dtb \ qcom-msm8960-samsung-expressatt.dtb \ qcom-msm8974-lge-nexus5-hammerhead.dtb \ + qcom-msm8974-samsung-hlte.dtb \ qcom-msm8974-sony-xperia-rhine-amami.dtb \ qcom-msm8974-sony-xperia-rhine-honami.dtb \ qcom-msm8974pro-fairphone-fp2.dtb \ + qcom-msm8974pro-htc-m8.dtb \ qcom-msm8974pro-oneplus-bacon.dtb \ qcom-msm8974pro-samsung-klte.dtb \ qcom-msm8974pro-samsung-kltechn.dtb \ + qcom-msm8974pro-sony-xperia-shinano-aries.dtb \ qcom-msm8974pro-sony-xperia-shinano-castor.dtb \ qcom-msm8974pro-sony-xperia-shinano-leo.dtb \ qcom-mdm9615-wp8548-mangoh-green.dtb \ diff --git a/arch/arm/boot/dts/qcom/msm8226-motorola-falcon.dts b/arch/arm/boot/dts/qcom/msm8226-motorola-falcon.dts index 029e1b1659c9..5dbca83f2230 100644 --- a/arch/arm/boot/dts/qcom/msm8226-motorola-falcon.dts +++ b/arch/arm/boot/dts/qcom/msm8226-motorola-falcon.dts @@ -96,6 +96,35 @@ }; }; +&blsp1_i2c2 { + status = "okay"; + + magnetometer@c { + compatible = "asahi-kasei,ak8963"; + reg = <0xc>; + interrupts-extended = <&tlmm 66 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>; + vdd-supply = <&pm8226_l19>; + vid-supply = <&pm8226_lvs1>; + pinctrl-0 = <&mag_int_default &mag_reset_default>; + pinctrl-names = "default"; + }; + + accelerometer@19 { + compatible = "st,lis3dh-accel"; + reg = <0x19>; + interrupts-extended = <&tlmm 63 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&pm8226_l19>; + vddio-supply = <&pm8226_lvs1>; + pinctrl-0 = <&accel_int_default>; + pinctrl-names = "default"; + mount-matrix = "0", "1", "0", + "1", "0", "0", + "0", "0", "-1"; + st,drdy-int-pin = <1>; + }; +}; + &blsp1_i2c3 { status = "okay"; @@ -321,6 +350,30 @@ }; &tlmm { + accel_int_default: accel-int-default-state { + pins = "gpio63"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-disable; + }; + + mag_int_default: mag-int-default-state { + pins = "gpio66"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-disable; + }; + + mag_reset_default: mag-reset-default-state { + pins = "gpio62"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-high; + }; + reg_lcd_default: reg-lcd-default-state { pins = "gpio31", "gpio33"; function = "gpio"; diff --git a/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-milletwifi.dts b/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-milletwifi.dts new file mode 100644 index 000000000000..7d519156d91d --- /dev/null +++ b/arch/arm/boot/dts/qcom/qcom-apq8026-samsung-milletwifi.dts @@ -0,0 +1,573 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2022, Matti Lehtimäki <matti.lehtimaki@gmail.com> + * Copyright (c) 2023, Bryant Mairs <bryant@mai.rs> + */ + +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include <dt-bindings/power/summit,smb347-charger.h> +#include "qcom-msm8226.dtsi" +#include "pm8226.dtsi" + +/delete-node/ &adsp_region; +/delete-node/ &smem_region; + +/ { + model = "Samsung Galaxy Tab 4 8.0 Wi-Fi"; + compatible = "samsung,milletwifi", "qcom,apq8026"; + chassis-type = "tablet"; + + aliases { + display0 = &framebuffer0; + mmc0 = &sdhc_1; /* SDC1 eMMC slot */ + mmc1 = &sdhc_2; /* SDC2 SD card slot */ + }; + + chosen { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + stdout-path = "display0"; + + framebuffer0: framebuffer@3200000 { + compatible = "simple-framebuffer"; + reg = <0x03200000 0x800000>; + width = <800>; + height = <1280>; + stride = <(800 * 3)>; + format = "r8g8b8"; + }; + }; + + gpio-hall-sensor { + compatible = "gpio-keys"; + + event-hall-sensor { + label = "Cover"; + gpios = <&tlmm 37 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + debounce-interval = <15>; + linux,can-disable; + wakeup-source; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + + key-home { + label = "Home"; + gpios = <&tlmm 108 GPIO_ACTIVE_LOW>; + linux,code = <KEY_HOMEPAGE>; + debounce-interval = <15>; + }; + + key-volume-down { + label = "Volume Down"; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + debounce-interval = <15>; + }; + + key-volume-up { + label = "Volume Up"; + gpios = <&tlmm 106 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + debounce-interval = <15>; + }; + }; + + i2c-backlight { + compatible = "i2c-gpio"; + sda-gpios = <&tlmm 20 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + scl-gpios = <&tlmm 21 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; + + pinctrl-0 = <&backlight_i2c_default_state>; + pinctrl-names = "default"; + + i2c-gpio,delay-us = <4>; + + #address-cells = <1>; + #size-cells = <0>; + + backlight@2c { + compatible = "ti,lp8556"; + reg = <0x2c>; + enable-supply = <®_backlight_vddio>; + + dev-ctrl = /bits/ 8 <0x80>; + init-brt = /bits/ 8 <0x3f>; + + /* + * Change transition duration: 200ms, Change + * transition strength: heavy, PWM hysteresis: + * 1-bit w/ 8-bit resolution + */ + rom-a3h { + rom-addr = /bits/ 8 <0xa3>; + rom-val = /bits/ 8 <0x5e>; + }; + + /* + * PWM phase configuration: 3-phase/3 drivers + * (0, 120deg, 240deg, -, -, -), + * PWM frequency: 9616Hz (10-bit) + */ + rom-a5h { + rom-addr = /bits/ 8 <0xa5>; + rom-val = /bits/ 8 <0x34>; + }; + + /* + * Enable LED drivers 2 & 3, Boot inductor + * current limit: 1.5A/2.6A + */ + rom-a7h { + rom-addr = /bits/ 8 <0xa7>; + rom-val = /bits/ 8 <0xfa>; + }; + }; + }; + + reg_backlight_vddio: regulator-backlight-vddio { + compatible = "regulator-fixed"; + regulator-name = "backlight_vddio"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&tlmm 74 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&backlight_vddio_default_state>; + pinctrl-names = "default"; + }; + + reg_tsp_1p8v: regulator-tsp-1p8v { + compatible = "regulator-fixed"; + regulator-name = "tsp_1p8v"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + + gpio = <&tlmm 114 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&tsp_en1_default_state>; + pinctrl-names = "default"; + }; + + reg_tsp_3p3v: regulator-tsp-3p3v { + compatible = "regulator-fixed"; + regulator-name = "tsp_3p3v"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 31 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&tsp_en_default_state>; + pinctrl-names = "default"; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + framebuffer@3200000 { + reg = <0x03200000 0x800000>; + no-map; + }; + + mpss_region: mpss@8400000 { + reg = <0x08400000 0x1f00000>; + no-map; + }; + + mba_region: mba@a300000 { + reg = <0x0a300000 0x100000>; + no-map; + }; + + reserved@cb00000 { + reg = <0x0cb00000 0x700000>; + no-map; + }; + + wcnss_region: wcnss@d200000 { + reg = <0x0d200000 0x700000>; + no-map; + }; + + adsp_region: adsp@d900000 { + reg = <0x0d900000 0x1800000>; + no-map; + }; + + venus@f100000 { + reg = <0x0f100000 0x500000>; + no-map; + }; + + smem_region: smem@fa00000 { + reg = <0x0fa00000 0x100000>; + no-map; + }; + + reserved@fb00000 { + reg = <0x0fb00000 0x260000>; + no-map; + }; + + rfsa@fd60000 { + reg = <0x0fd60000 0x20000>; + no-map; + }; + + rmtfs@fd80000 { + compatible = "qcom,rmtfs-mem"; + reg = <0x0fd80000 0x180000>; + no-map; + + qcom,client-id = <1>; + }; + }; +}; + +&blsp1_i2c2 { + status = "okay"; + + accelerometer@1d { + compatible = "st,lis2hh12"; + reg = <0x1d>; + + interrupts-extended = <&tlmm 54 IRQ_TYPE_LEVEL_HIGH>; + + pinctrl-0 = <&accel_int_default_state>; + pinctrl-names = "default"; + + vdd-supply = <&pm8226_l19>; + vddio-supply = <&pm8226_lvs1>; + + mount-matrix = "0", "1", "0", + "-1", "0", "0", + "0", "0", "1"; + + st,drdy-int-pin = <1>; + }; +}; + +&blsp1_i2c3 { + status = "okay"; + + charger@6a { + compatible = "summit,smb358"; + reg = <0x6a>; + + interrupts-extended = <&tlmm 115 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-0 = <&charger_int_default_state>; + pinctrl-names = "default"; + + summit,enable-usb-charging; + summit,enable-charge-control = <SMB3XX_CHG_ENABLE_SW>; + summit,fast-voltage-threshold-microvolt = <3000000>; + summit,chip-temperature-threshold-celsius = <130>; + summit,usb-current-limit-microamp = <1500000>; + }; +}; + +&blsp1_i2c4 { + status = "okay"; + + muic: usb-switch@25 { + compatible = "siliconmitus,sm5502-muic"; + reg = <0x25>; + + interrupts-extended = <&tlmm 67 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-0 = <&muic_int_default_state>; + pinctrl-names = "default"; + }; +}; + +&blsp1_i2c5 { + status = "okay"; + + touchscreen@48 { + compatible = "melfas,mms252", "melfas,mms114"; + reg = <0x48>; + interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>; + touchscreen-size-x = <800>; + touchscreen-size-y = <1280>; + avdd-supply = <®_tsp_3p3v>; + vdd-supply = <®_tsp_1p8v>; + linux,keycodes = <KEY_APPSELECT KEY_BACK>; + + pinctrl-0 = <&tsp_int_rst_default_state>; + pinctrl-names = "default"; + }; +}; + +&rpm_requests { + regulators { + compatible = "qcom,rpm-pm8226-regulators"; + + pm8226_s3: s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + pm8226_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_s5: s5 { + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + }; + + pm8226_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8226_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8226_l3: l3 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1337500>; + regulator-always-on; + }; + + pm8226_l4: l4 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8226_l5: l5 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8226_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + pm8226_l7: l7 { + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <1850000>; + }; + + pm8226_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + pm8226_l9: l9 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8226_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l14: l14 { + regulator-min-microvolt = <2750000>; + regulator-max-microvolt = <2750000>; + }; + + pm8226_l15: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + pm8226_l16: l16 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3350000>; + }; + + pm8226_l17: l17 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + + regulator-system-load = <200000>; + regulator-allow-set-load; + regulator-always-on; + }; + + pm8226_l18: l18 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_l19: l19 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3000000>; + }; + + pm8226_l20: l20 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + pm8226_l21: l21 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_l22: l22 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + }; + + pm8226_l23: l23 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + pm8226_l24: l24 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1350000>; + }; + + pm8226_l25: l25 { + regulator-min-microvolt = <1775000>; + regulator-max-microvolt = <2125000>; + }; + + pm8226_l26: l26 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1300000>; + }; + + pm8226_l27: l27 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l28: l28 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_lvs1: lvs1 {}; + }; +}; + +&sdhc_1 { + vmmc-supply = <&pm8226_l17>; + vqmmc-supply = <&pm8226_l6>; + + bus-width = <8>; + non-removable; + + status = "okay"; +}; + +&sdhc_2 { + vmmc-supply = <&pm8226_l18>; + vqmmc-supply = <&pm8226_l21>; + + bus-width = <4>; + cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&sdhc2_default_state>, <&sdc2_cd_default_state>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&tlmm { + accel_int_default_state: accel-int-default-state { + pins = "gpio54"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + backlight_i2c_default_state: backlight-i2c-default-state { + pins = "gpio20", "gpio21"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + backlight_vddio_default_state: backlight-vddio-default-state { + pins = "gpio74"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + charger_int_default_state: charger-int-default-state { + pins = "gpio115"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + muic_int_default_state: muic-int-default-state { + pins = "gpio67"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + sdc2_cd_default_state: sdc2-cd-default-state { + pins = "gpio38"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + tsp_en_default_state: tsp-en-default-state { + pins = "gpio31"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + tsp_en1_default_state: tsp-en1-default-state { + pins = "gpio114"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + tsp_int_rst_default_state: tsp-int-rst-default-state { + pins = "gpio17"; + function = "gpio"; + drive-strength = <10>; + bias-pull-up; + }; +}; + +&usb { + extcon = <&muic>, <&muic>; + status = "okay"; +}; + +&usb_hs_phy { + extcon = <&muic>; + v1p8-supply = <&pm8226_l10>; + v3p3-supply = <&pm8226_l20>; +}; diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi index 11e60b74c3c9..769e151747c3 100644 --- a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi @@ -666,12 +666,12 @@ qcom,controller-type = "pmic-arbiter"; }; - qfprom: qfprom@700000 { + qfprom: efuse@700000 { compatible = "qcom,apq8064-qfprom", "qcom,qfprom"; reg = <0x00700000 0x1000>; #address-cells = <1>; #size-cells = <1>; - ranges; + tsens_calib: calib@404 { reg = <0x404 0x10>; }; @@ -684,7 +684,6 @@ compatible = "qcom,gcc-apq8064", "syscon"; reg = <0x00900000 0x4000>; #clock-cells = <1>; - #power-domain-cells = <1>; #reset-cells = <1>; clocks = <&cxo_board>, <&pxo_board>, @@ -993,7 +992,7 @@ reg = <0x1a400000 0x100>; }; - gpu: adreno-3xx@4300000 { + gpu: gpu@4300000 { compatible = "qcom,adreno-320.2", "qcom,adreno"; reg = <0x04300000 0x20000>; reg-names = "kgsl_3d0_reg_memory"; diff --git a/arch/arm/boot/dts/qcom/qcom-apq8084.dtsi b/arch/arm/boot/dts/qcom/qcom-apq8084.dtsi index ca53dff820ef..2b52e5d5eb51 100644 --- a/arch/arm/boot/dts/qcom/qcom-apq8084.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-apq8084.dtsi @@ -245,7 +245,7 @@ reg = <0xfc190000 0x10000>; }; - qfprom: qfprom@fc4bc000 { + qfprom: efuse@fc4bc000 { compatible = "qcom,apq8084-qfprom", "qcom,qfprom"; reg = <0xfc4bc000 0x1000>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi index 0fb65f2bbcdf..56415ab34083 100644 --- a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi @@ -187,7 +187,6 @@ gcc: clock-controller@1800000 { compatible = "qcom,gcc-ipq4019"; #clock-cells = <1>; - #power-domain-cells = <1>; #reset-cells = <1>; reg = <0x1800000 0x60000>; clocks = <&xo>, <&sleep_clk>; diff --git a/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi index f128510d8445..da0fd75f4711 100644 --- a/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi @@ -372,7 +372,7 @@ qcom,controller-type = "pmic-arbiter"; }; - qfprom: qfprom@700000 { + qfprom: efuse@700000 { compatible = "qcom,ipq8064-qfprom", "qcom,qfprom"; reg = <0x00700000 0x1000>; #address-cells = <1>; @@ -519,7 +519,6 @@ reg = <0x00900000 0x4000>; #clock-cells = <1>; #reset-cells = <1>; - #power-domain-cells = <1>; tsens: thermal-sensor { compatible = "qcom,ipq8064-tsens"; diff --git a/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi index 34c60994d026..573feb3218c3 100644 --- a/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-mdm9615.dtsi @@ -102,7 +102,6 @@ gcc: clock-controller@900000 { compatible = "qcom,gcc-mdm9615"; #clock-cells = <1>; - #power-domain-cells = <1>; #reset-cells = <1>; reg = <0x900000 0x4000>; clocks = <&cxo_board>, diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-common.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-common.dtsi index 525d8c608b06..8839b23fc693 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-common.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-msm8226-microsoft-common.dtsi @@ -287,6 +287,10 @@ status = "okay"; }; +&smbb { + status = "okay"; +}; + &usb { extcon = <&smbb>; dr_mode = "peripheral"; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-ms013g.dts b/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-ms013g.dts new file mode 100644 index 000000000000..2ecc5983d365 --- /dev/null +++ b/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-ms013g.dts @@ -0,0 +1,386 @@ +// SPDX-License-Identifier: BSD-3-Clause + +/dts-v1/; + +#include "qcom-msm8226.dtsi" +#include "pm8226.dtsi" + +/delete-node/ &smem_region; + +/ { + model = "Samsung Galaxy Grand 2"; + compatible = "samsung,ms013g", "qcom,msm8226"; + chassis-type = "handset"; + + aliases { + mmc0 = &sdhc_1; /* SDC1 eMMC slot */ + mmc1 = &sdhc_2; /* SDC2 SD card slot */ + serial0 = &blsp1_uart3; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-hall-sensor { + compatible = "gpio-keys"; + + pinctrl-0 = <&gpio_hall_sensor_default>; + pinctrl-names = "default"; + + label = "GPIO Hall Effect Sensor"; + + event-hall-sensor { + label = "Hall Effect Sensor"; + gpios = <&tlmm 50 GPIO_ACTIVE_LOW>; + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + linux,can-disable; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&gpio_keys_default>; + pinctrl-names = "default"; + + label = "GPIO Buttons"; + + button-volume-up { + label = "Volume Up"; + gpios = <&tlmm 106 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + + button-volume-down { + label = "Volume Down"; + gpios = <&tlmm 107 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + }; + + button-home { + label = "Home Key"; + gpios = <&tlmm 108 GPIO_ACTIVE_LOW>; + linux,code = <KEY_HOMEPAGE>; + }; + }; + + reg_motor_vdd: regulator-motor-vdd { + compatible = "regulator-fixed"; + regulator-name = "motor_vdd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 111 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&motor_en_default>; + pinctrl-names = "default"; + }; + + reg_vdd_tsp_a: regulator-vdd-tsp-a { + compatible = "regulator-fixed"; + regulator-name = "tsp_3p3v"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + gpio = <&tlmm 31 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&tsp_en_default>; + pinctrl-names = "default"; + }; + + reserved-memory { + smem_region: smem@fa00000 { + reg = <0x0fa00000 0x100000>; + no-map; + }; + }; + + vibrator { + compatible = "regulator-haptic"; + haptic-supply = <®_motor_vdd>; + min-microvolt = <3300000>; + max-microvolt = <3300000>; + }; +}; + +&blsp1_i2c2 { + status = "okay"; + + accelerometer@18 { + compatible = "bosch,bma255"; + reg = <0x18>; + interrupts-extended = <&tlmm 64 IRQ_TYPE_EDGE_RISING>; + + vdd-supply = <&pm8226_l19>; + vddio-supply = <&pm8226_lvs1>; + + pinctrl-0 = <&accel_int_default>; + pinctrl-names = "default"; + + mount-matrix = "0", "1", "0", + "-1", "0", "0", + "0", "0", "-1"; + }; +}; + +&blsp1_i2c5 { + status = "okay"; + + touchscreen@20 { + compatible = "zinitix,bt541"; + + reg = <0x20>; + interrupts-extended = <&tlmm 17 IRQ_TYPE_EDGE_FALLING>; + + touchscreen-size-x = <720>; + touchscreen-size-y = <1280>; + + vcca-supply = <®_vdd_tsp_a>; + vdd-supply = <&pm8226_lvs1>; + + pinctrl-0 = <&tsp_int_default>; + pinctrl-names = "default"; + }; +}; + +&blsp1_uart3 { + status = "okay"; +}; + +&rpm_requests { + regulators { + compatible = "qcom,rpm-pm8226-regulators"; + + pm8226_s3: s3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1300000>; + }; + + pm8226_s4: s4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2200000>; + }; + + pm8226_s5: s5 { + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1150000>; + }; + + pm8226_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8226_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8226_l3: l3 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1337500>; + }; + + pm8226_l4: l4 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8226_l5: l5 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8226_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allow-set-load; + regulator-always-on; + }; + + pm8226_l7: l7 { + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <1850000>; + }; + + pm8226_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l9: l9 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8226_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8226_l14: l14 { + regulator-min-microvolt = <2750000>; + regulator-max-microvolt = <2750000>; + }; + + pm8226_l15: l15 { + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + pm8226_l16: l16 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3350000>; + }; + + pm8226_l17: l17 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + + regulator-system-load = <200000>; + regulator-allow-set-load; + regulator-always-on; + }; + + pm8226_l18: l18 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_l19: l19 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3000000>; + }; + + pm8226_l20: l20 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + + pm8226_l21: l21 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + }; + + pm8226_l22: l22 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_l23: l23 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + pm8226_l24: l24 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1350000>; + }; + + pm8226_l25: l25 { + regulator-min-microvolt = <1775000>; + regulator-max-microvolt = <2125000>; + }; + + pm8226_l26: l26 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1300000>; + }; + + pm8226_l27: l27 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8226_l28: l28 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8226_lvs1: lvs1 {}; + }; +}; + +&sdhc_1 { + vmmc-supply = <&pm8226_l17>; + vqmmc-supply = <&pm8226_l6>; + + bus-width = <8>; + non-removable; + + status = "okay"; +}; + +&sdhc_2 { + vmmc-supply = <&pm8226_l18>; + vqmmc-supply = <&pm8226_l21>; + + bus-width = <4>; + cd-gpios = <&tlmm 38 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&sdhc2_default_state &sdhc2_cd_default>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&tlmm { + accel_int_default: accel-int-default-state { + pins = "gpio64"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + gpio_hall_sensor_default: gpio-hall-sensor-default-state { + pins = "gpio50"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + gpio_keys_default: gpio-keys-default-state { + pins = "gpio106", "gpio107", "gpio108"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + motor_en_default: motor-en-default-state { + pins = "gpio111"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + sdhc2_cd_default: sdhc2-cd-default-state { + pins = "gpio38"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + tsp_en_default: tsp-en-default-state { + pins = "gpio31"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + + tsp_int_default: tsp-int-default-state { + pins = "gpio17"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; +}; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi index 270973e85625..b2f92ad6499a 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-msm8226.dtsi @@ -635,7 +635,7 @@ reg = <0xfc4ab000 0x4>; }; - qfprom: qfprom@fc4bc000 { + qfprom: efuse@fc4bc000 { compatible = "qcom,msm8226-qfprom", "qcom,qfprom"; reg = <0xfc4bc000 0x1000>; #address-cells = <1>; @@ -1046,7 +1046,7 @@ }; }; - gpu: adreno@fdb00000 { + gpu: gpu@fdb00000 { compatible = "qcom,adreno-305.18", "qcom,adreno"; reg = <0xfdb00000 0x10000>; reg-names = "kgsl_3d0_reg_memory"; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi index 455ba4bf1bf4..a66c474cd1aa 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-msm8660.dtsi @@ -113,7 +113,6 @@ gcc: clock-controller@900000 { compatible = "qcom,gcc-msm8660"; #clock-cells = <1>; - #power-domain-cells = <1>; #reset-cells = <1>; reg = <0x900000 0x4000>; clocks = <&pxo_board>, <&cxo_board>; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts b/arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts index 0cbe2d2fbbb1..376a33125941 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts +++ b/arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts @@ -29,6 +29,10 @@ height = <1280>; stride = <(720 * 3)>; format = "r8g8b8"; + vsp-supply = <®_lcd_pos>; + vsn-supply = <®_lcd_neg>; + vdd-supply = <&pm8226_l28>; + vddio-supply = <&vddio_disp_vreg>; }; }; @@ -51,6 +55,18 @@ }; }; + vddio_disp_vreg: regulator-vddio-disp { + compatible = "regulator-fixed"; + regulator-name = "vddio_disp"; + gpio = <&tlmm 34 GPIO_ACTIVE_HIGH>; + startup-delay-us = <300>; + enable-active-high; + regulator-boot-on; + vin-supply = <&pm8226_l8>; + pinctrl-0 = <&disp_vddio_default>; + pinctrl-names = "default"; + }; + reserved-memory { #address-cells = <1>; #size-cells = <1>; @@ -68,12 +84,67 @@ }; }; +&blsp1_i2c2 { + clock-frequency = <100000>; + status = "okay"; + + magnetometer@c { + compatible = "asahi-kasei,ak8963"; + reg = <0xc>; + interrupts-extended = <&tlmm 38 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>; + vdd-supply = <&pm8226_l19>; + pinctrl-0 = <&mag_int_default &mag_reset_default>; + pinctrl-names = "default"; + }; + + accelerometer@18 { + compatible = "st,lis3dh-accel"; + reg = <0x18>; + interrupts-extended = <&tlmm 1 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&pm8226_l19>; + pinctrl-0 = <&accel_int_default>; + pinctrl-names = "default"; + st,drdy-int-pin = <1>; + }; +}; + &blsp1_i2c3 { + clock-frequency = <400000>; status = "okay"; + regulator@3e { + compatible = "ti,tps65132"; + reg = <0x3e>; + pinctrl-0 = <®_lcd_default>; + pinctrl-names = "default"; + + reg_lcd_pos: outp { + regulator-name = "outp"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <6000000>; + regulator-active-discharge = <1>; + regulator-boot-on; + enable-gpios = <&tlmm 31 GPIO_ACTIVE_HIGH>; + }; + + reg_lcd_neg: outn { + regulator-name = "outn"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <6000000>; + regulator-active-discharge = <1>; + regulator-boot-on; + enable-gpios = <&tlmm 33 GPIO_ACTIVE_HIGH>; + }; + }; + sensor@48 { compatible = "ti,tmp108"; reg = <0x48>; + interrupts-extended = <&tlmm 13 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&temp_alert_default>; + pinctrl-names = "default"; + #thermal-sensor-cells = <0>; }; }; @@ -278,6 +349,56 @@ status = "okay"; }; +&tlmm { + accel_int_default: accel-int-default-state { + pins = "gpio1"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-disable; + }; + + disp_vddio_default: disp-vddio-default-state { + pins = "gpio34"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-high; + }; + + mag_int_default: mag-int-default-state { + pins = "gpio38"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-disable; + }; + + mag_reset_default: mag-reset-default-state { + pins = "gpio62"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-high; + }; + + reg_lcd_default: reg-lcd-default-state { + pins = "gpio31", "gpio33"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-high; + }; + + temp_alert_default: temp-alert-default-state { + pins = "gpio13"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-disable; + }; +}; + &usb { extcon = <&smbb>; dr_mode = "peripheral"; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi index 922f9e49468a..ebc43c5c6e5f 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi @@ -47,9 +47,9 @@ }; }; - memory { + memory@80000000 { device_type = "memory"; - reg = <0x0 0x0>; + reg = <0x80000000 0>; }; cpu-pmu { @@ -129,7 +129,6 @@ gcc: clock-controller@900000 { compatible = "qcom,gcc-msm8960"; #clock-cells = <1>; - #power-domain-cells = <1>; #reset-cells = <1>; reg = <0x900000 0x4000>; clocks = <&cxo_board>, diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts index 4aaae8537a3f..fdb6e22986cf 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts +++ b/arch/arm/boot/dts/qcom/qcom-msm8974-lge-nexus5-hammerhead.dts @@ -182,7 +182,7 @@ status = "okay"; clock-frequency = <355000>; - led-controller@38 { + backlight: led-controller@38 { compatible = "ti,lm3630a"; status = "okay"; reg = <0x38>; @@ -272,6 +272,8 @@ reg = <0>; compatible = "lg,acx467akm-7"; + backlight = <&backlight>; + pinctrl-names = "default"; pinctrl-0 = <&panel_pin>; @@ -328,7 +330,7 @@ power-source = <PM8941_GPIO_S3>; }; - otg { + otg-hog { gpio-hog; gpios = <35 GPIO_ACTIVE_HIGH>; output-high; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974-samsung-hlte.dts b/arch/arm/boot/dts/qcom/qcom-msm8974-samsung-hlte.dts new file mode 100644 index 000000000000..903bb4d12513 --- /dev/null +++ b/arch/arm/boot/dts/qcom/qcom-msm8974-samsung-hlte.dts @@ -0,0 +1,401 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "qcom-msm8974.dtsi" +#include "pm8841.dtsi" +#include "pm8941.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h> + +/ { + model = "Samsung Galaxy Note 3"; + compatible = "samsung,hlte", "qcom,msm8974"; + chassis-type = "handset"; + + aliases { + mmc0 = &sdhc_1; /* SDC1 eMMC slot */ + mmc1 = &sdhc_3; /* SDC3 SD card slot */ + serial0 = &blsp1_uart1; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&gpio_keys_pin_a>; + pinctrl-names = "default"; + + key-home { + label = "Home Key"; + gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>; + linux,code = <KEY_HOMEPAGE>; + wakeup-source; + debounce-interval = <15>; + }; + + key-volume-down { + label = "Volume Down"; + gpios = <&pm8941_gpios 2 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + debounce-interval = <15>; + }; + + key-volume-up { + label = "Volume Up"; + gpios = <&pm8941_gpios 5 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + debounce-interval = <15>; + }; + }; + + touch_ldo: regulator-touch { + compatible = "regulator-fixed"; + regulator-name = "touch-ldo"; + + gpio = <&pm8941_gpios 9 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-boot-on; + + pinctrl-0 = <&touch_ldo_pin>; + pinctrl-names = "default"; + }; +}; + +&blsp1_i2c2 { + status = "okay"; + + touchscreen@20 { + compatible = "syna,rmi4-i2c"; + reg = <0x20>; + + interrupt-parent = <&pm8941_gpios>; + interrupts = <30 IRQ_TYPE_EDGE_FALLING>; + + vdd-supply = <&pm8941_l10>; + vio-supply = <&touch_ldo>; + + pinctrl-0 = <&touch_pin>; + pinctrl-names = "default"; + + syna,startup-delay-ms = <100>; + + #address-cells = <1>; + #size-cells = <0>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; + }; + + rmi4-f12@12 { + reg = <0x12>; + syna,sensor-type = <1>; + }; + }; +}; + +&blsp2_i2c6 { + status = "okay"; + + fuelgauge@36 { + compatible = "maxim,max17048"; + reg = <0x36>; + + maxim,double-soc; + maxim,rcomp = /bits/ 8 <0x56>; + + interrupt-parent = <&pm8941_gpios>; + interrupts = <26 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-0 = <&fuelgauge_pin>; + pinctrl-names = "default"; + }; +}; + +&blsp1_uart2 { + status = "okay"; +}; + +&pm8941_gpios { + gpio_keys_pin_a: gpio-keys-active-state { + pins = "gpio2", "gpio3", "gpio5"; + function = "normal"; + bias-pull-up; + power-source = <PM8941_GPIO_S3>; + }; + + fuelgauge_pin: fuelgauge-int-state { + pins = "gpio26"; + function = "normal"; + bias-disable; + input-enable; + power-source = <PM8941_GPIO_S3>; + }; + + touch_pin: touchscreen-int-state { + pins = "gpio30"; + function = "normal"; + bias-disable; + input-enable; + power-source = <PM8941_GPIO_S3>; + }; + + touch_ldo_pin: touchscreen-ldo-state { + pins = "gpio9"; + function = "normal"; + output-high; + power-source = <PM8941_GPIO_S3>; + qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>; + }; +}; + +&remoteproc_adsp { + cx-supply = <&pm8841_s2>; + status = "okay"; +}; + +&remoteproc_mss { + cx-supply = <&pm8841_s2>; + mss-supply = <&pm8841_s3>; + mx-supply = <&pm8841_s1>; + pll-supply = <&pm8941_l12>; + status = "okay"; +}; + +&rpm_requests { + regulators-0 { + compatible = "qcom,rpm-pm8841-regulators"; + + pm8841_s1: s1 { + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <1050000>; + }; + + pm8841_s2: s2 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; + }; + + pm8841_s3: s3 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + pm8841_s4: s4 { + regulator-min-microvolt = <815000>; + regulator-max-microvolt = <900000>; + }; + }; + + regulators-1 { + compatible = "qcom,rpm-pm8941-regulators"; + + pm8941_s1: s1 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + }; + + pm8941_s2: s2 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + }; + + pm8941_s3: s3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l1: l1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8941_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8941_l3: l3 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1225000>; + }; + + pm8941_l4: l4 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8941_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l9: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8941_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l11: l11 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1350000>; + }; + + pm8941_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + pm8941_l13: l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + }; + + pm8941_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l15: l15 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8941_l16: l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8941_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3000000>; + }; + + pm8941_l18: l18 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8941_l19: l19 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <3350000>; + }; + + pm8941_l20: l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <200000>; + regulator-allow-set-load; + }; + + pm8941_l21: l21 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <200000>; + regulator-allow-set-load; + }; + + pm8941_l22: l22 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3000000>; + }; + + pm8941_l23: l23 { + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3300000>; + }; + + pm8941_l24: l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + }; + }; +}; + +&sdhc_1 { + vmmc-supply = <&pm8941_l20>; + vqmmc-supply = <&pm8941_s3>; + + pinctrl-0 = <&sdhc1_pin_a>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&sdhc_3 { + max-frequency = <100000000>; + + vmmc-supply = <&pm8941_l21>; + vqmmc-supply = <&pm8941_l21>; + + pinctrl-0 = <&sdhc3_pin_a>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&tlmm { + sdhc1_pin_a: sdhc1-pin-active-state { + clk-pins { + pins = "sdc1_clk"; + drive-strength = <4>; + bias-disable; + }; + + cmd-data-pins { + pins = "sdc1_cmd", "sdc1_data"; + drive-strength = <4>; + bias-pull-up; + }; + }; + + sdhc3_pin_a: sdhc3-pin-active-state { + pins = "gpio35", "gpio36", "gpio37", "gpio38", "gpio39", "gpio40"; + function = "sdc3"; + drive-strength = <8>; + bias-disable; + }; +}; + +&usb { + phys = <&usb_hs1_phy>; + phy-select = <&tcsr 0xb000 0>; + + hnp-disable; + srp-disable; + adp-disable; + + status = "okay"; +}; + +&usb_hs1_phy { + v1p8-supply = <&pm8941_l6>; + v3p3-supply = <&pm8941_l24>; + + qcom,init-seq = /bits/ 8 <0x1 0x64>; + + status = "okay"; +}; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi index 5651bb31bd54..15568579459a 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-msm8974.dtsi @@ -132,7 +132,7 @@ smd-edge { interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 8 0>; + mboxes = <&apcs 0>; qcom,smd-edge = <15>; rpm_requests: rpm-requests { @@ -219,7 +219,7 @@ interrupt-parent = <&intc>; interrupts = <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 8 10>; + mboxes = <&apcs 10>; qcom,local-pid = <0>; qcom,remote-pid = <2>; @@ -244,7 +244,7 @@ interrupt-parent = <&intc>; interrupts = <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 8 14>; + mboxes = <&apcs 14>; qcom,local-pid = <0>; qcom,remote-pid = <1>; @@ -269,7 +269,7 @@ interrupt-parent = <&intc>; interrupts = <GIC_SPI 143 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 8 18>; + mboxes = <&apcs 18>; qcom,local-pid = <0>; qcom,remote-pid = <4>; @@ -294,9 +294,7 @@ #address-cells = <1>; #size-cells = <0>; - qcom,ipc-1 = <&apcs 8 13>; - qcom,ipc-2 = <&apcs 8 9>; - qcom,ipc-3 = <&apcs 8 19>; + mboxes = <0>, <&apcs 13>, <&apcs 9>, <&apcs 19>; apps_smsm: apps@0 { reg = <0>; @@ -343,9 +341,11 @@ <0xf9002000 0x1000>; }; - apcs: syscon@f9011000 { - compatible = "syscon"; + apcs: mailbox@f9011000 { + compatible = "qcom,msm8974-apcs-kpss-global", + "qcom,msm8994-apcs-kpss-global", "syscon"; reg = <0xf9011000 0x1000>; + #mbox-cells = <1>; }; saw_l2: power-manager@f9012000 { @@ -757,7 +757,7 @@ smd-edge { interrupts = <GIC_SPI 142 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 8 17>; + mboxes = <&apcs 17>; qcom,smd-edge = <6>; wcnss { @@ -1233,7 +1233,7 @@ reg = <0xfc4ab000 0x4>; }; - qfprom: qfprom@fc4bc000 { + qfprom: efuse@fc4bc000 { compatible = "qcom,msm8974-qfprom", "qcom,qfprom"; reg = <0xfc4bc000 0x2100>; #address-cells = <1>; @@ -1576,7 +1576,7 @@ smd-edge { interrupts = <GIC_SPI 25 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 8 12>; + mboxes = <&apcs 12>; qcom,smd-edge = <0>; label = "modem"; @@ -2129,7 +2129,7 @@ }; }; - gpu: adreno@fdb00000 { + gpu: gpu@fdb00000 { compatible = "qcom,adreno-330.1", "qcom,adreno"; reg = <0xfdb00000 0x10000>; reg-names = "kgsl_3d0_reg_memory"; @@ -2213,7 +2213,7 @@ smd-edge { interrupts = <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>; - qcom,ipc = <&apcs 8 8>; + mboxes = <&apcs 8>; qcom,smd-edge = <1>; label = "lpass"; }; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-htc-m8.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-htc-m8.dts new file mode 100644 index 000000000000..b896cc1ad6f7 --- /dev/null +++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-htc-m8.dts @@ -0,0 +1,353 @@ +// SPDX-License-Identifier: GPL-2.0-only +#include "qcom-msm8974pro.dtsi" +#include "pm8841.dtsi" +#include "pm8941.dtsi" +#include <dt-bindings/input/input.h> + +/ { + model = "HTC One (M8)"; + compatible = "htc,m8", "qcom,msm8974pro", "qcom,msm8974"; + chassis-type = "handset"; + + aliases { + mmc0 = &sdhc_1; + }; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&gpio_keys_default>; + pinctrl-names = "default"; + + key-volume-down { + label = "volume_down"; + gpios = <&tlmm 27 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEDOWN>; + debounce-interval = <20>; + wakeup-source; + }; + + key-volume-up { + label = "volume_up"; + gpios = <&tlmm 28 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + debounce-interval = <20>; + wakeup-source; + }; + }; + + vreg_boost: vreg-boost { + compatible = "regulator-fixed"; + + regulator-name = "vreg-boost"; + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3150000>; + + regulator-always-on; + regulator-boot-on; + + gpio = <&pm8941_gpios 21 GPIO_ACTIVE_HIGH>; + enable-active-high; + + pinctrl-0 = <&boost_bypass_n_pin>; + pinctrl-names = "default"; + }; + + vreg_vph_pwr: vreg-vph-pwr { + compatible = "regulator-fixed"; + regulator-name = "vph-pwr"; + + regulator-min-microvolt = <3600000>; + regulator-max-microvolt = <3600000>; + + regulator-always-on; + }; +}; + +&pm8941_vib { + status = "okay"; +}; + +&pronto { + vddmx-supply = <&pm8841_s1>; + vddcx-supply = <&pm8841_s2>; + vddpx-supply = <&pm8941_s3>; + + pinctrl-0 = <&wcnss_pin_a>; + pinctrl-names = "default"; + + status = "okay"; + + iris { + vddxo-supply = <&pm8941_l6>; + vddrfa-supply = <&pm8941_l11>; + vddpa-supply = <&pm8941_l19>; + vdddig-supply = <&pm8941_s3>; + }; + + smd-edge { + qcom,remote-pid = <4>; + label = "pronto"; + + wcnss { + status = "okay"; + }; + }; +}; + +&rpm_requests { + regulators-0 { + compatible = "qcom,rpm-pm8841-regulators"; + + pm8841_s1: s1 { + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <1050000>; + }; + + pm8841_s2: s2 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1050000>; + }; + + pm8841_s3: s3 { + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + pm8841_s4: s4 { + regulator-min-microvolt = <815000>; + regulator-max-microvolt = <900000>; + }; + }; + + regulators-1 { + compatible = "qcom,rpm-pm8941-regulators"; + + vdd_l1_l3-supply = <&pm8941_s1>; + vdd_l2_lvs1_2_3-supply = <&pm8941_s3>; + vdd_l4_l11-supply = <&pm8941_s1>; + vdd_l5_l7-supply = <&pm8941_s2>; + vdd_l6_l12_l14_l15-supply = <&pm8941_s2>; + vdd_l8_l16_l18_l19-supply = <&vreg_vph_pwr>; + vdd_l9_l10_l17_l22-supply = <&vreg_boost>; + vdd_l13_l20_l23_l24-supply = <&vreg_boost>; + vdd_l21-supply = <&vreg_boost>; + + pm8941_s1: s1 { + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_s2: s2 { + regulator-min-microvolt = <2150000>; + regulator-max-microvolt = <2150000>; + regulator-boot-on; + }; + + pm8941_s3: s3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_l1: l1 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8941_l3: l3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8941_l4: l4 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1225000>; + }; + + pm8941_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + pm8941_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + }; + + pm8941_l8: l8 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l9: l9 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8941_l10: l10 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + }; + + pm8941_l11: l11 { + regulator-min-microvolt = <1225000>; + regulator-max-microvolt = <1350000>; + }; + + pm8941_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + pm8941_l13: l13 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2950000>; + regulator-boot-on; + }; + + pm8941_l14: l14 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8941_l15: l15 { + regulator-min-microvolt = <2050000>; + regulator-max-microvolt = <2050000>; + }; + + pm8941_l16: l16 { + regulator-min-microvolt = <2700000>; + regulator-max-microvolt = <2700000>; + }; + + pm8941_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8941_l18: l18 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8941_l19: l19 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <3350000>; + }; + + pm8941_l20: l20 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-system-load = <200000>; + regulator-allow-set-load; + regulator-boot-on; + }; + + pm8941_l21: l21 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-boot-on; + }; + + pm8941_l22: l22 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + pm8941_l23: l23 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + pm8941_l24: l24 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3075000>; + regulator-boot-on; + }; + }; +}; + +&sdhc_1 { + vmmc-supply = <&pm8941_l20>; + vqmmc-supply = <&pm8941_s3>; + + pinctrl-0 = <&sdc1_on>; + pinctrl-1 = <&sdc1_off>; + pinctrl-names = "default", "sleep"; + + status = "okay"; +}; + +&smbb { + status = "okay"; +}; + +&tlmm { + gpio_keys_default: gpio-keys-default-state { + pins = "gpio27", "gpio28"; + function = "gpio"; + bias-pull-up; + }; + + sdc1_on: sdc1-on-state { + clk-pins { + pins = "sdc1_clk"; + drive-strength = <10>; + bias-disable; + }; + + cmd-data-pins { + pins = "sdc1_cmd", "sdc1_data"; + drive-strength = <10>; + bias-pull-up; + }; + }; + + wcnss_pin_a: wcnss-pin-active-state { + pins = "gpio36", "gpio37", "gpio38", "gpio39", "gpio40"; + function = "wlan"; + drive-strength = <6>; + bias-pull-down; + }; +}; + +&usb { + phys = <&usb_hs1_phy>; + phy-select = <&tcsr 0xb000 0>; + extcon = <&smbb>, <&usb_id>; + vbus-supply = <&chg_otg>; + + hnp-disable; + srp-disable; + adp-disable; + + status = "okay"; +}; + +&usb_hs1_phy { + v1p8-supply = <&pm8941_l6>; + v3p3-supply = <&pm8941_l24>; + extcon = <&smbb>; + qcom,init-seq = /bits/ 8 <0x1 0x63>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-aries.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-aries.dts new file mode 100644 index 000000000000..2621c5928b6a --- /dev/null +++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-aries.dts @@ -0,0 +1,44 @@ +// SPDX-License-Identifier: GPL-2.0 +#include "qcom-msm8974pro-sony-xperia-shinano-common.dtsi" + +/ { + model = "Sony Xperia Z3 Compact"; + compatible = "sony,xperia-aries", "qcom,msm8974pro", "qcom,msm8974"; + chassis-type = "handset"; + + gpio-keys { + key-camera-snapshot { + label = "camera_snapshot"; + gpios = <&pm8941_gpios 3 GPIO_ACTIVE_LOW>; + linux,code = <KEY_CAMERA>; + debounce-interval = <15>; + }; + + key-camera-focus { + label = "camera_focus"; + gpios = <&pm8941_gpios 4 GPIO_ACTIVE_LOW>; + linux,code = <KEY_CAMERA_FOCUS>; + debounce-interval = <15>; + }; + }; +}; + +&gpio_keys_pin_a { + pins = "gpio2", "gpio3", "gpio4", "gpio5"; +}; + +&smbb { + usb-charge-current-limit = <1500000>; + qcom,fast-charge-safe-current = <2100000>; + qcom,fast-charge-current-limit = <1800000>; + qcom,fast-charge-safe-voltage = <4400000>; + qcom,fast-charge-high-threshold-voltage = <4350000>; + qcom,auto-recharge-threshold-voltage = <4280000>; + qcom,minimum-input-voltage = <4200000>; + + status = "okay"; +}; + +&synaptics_touchscreen { + vio-supply = <&pm8941_s3>; +}; diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-common.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-common.dtsi index e129bb1bd6ec..6af7c71c7158 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-common.dtsi +++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-sony-xperia-shinano-common.dtsi @@ -380,6 +380,8 @@ pm8941_l21: l21 { regulator-min-microvolt = <2950000>; regulator-max-microvolt = <2950000>; + regulator-system-load = <500000>; + regulator-allow-set-load; regulator-boot-on; }; diff --git a/arch/arm/boot/dts/renesas/r8a73a4.dtsi b/arch/arm/boot/dts/renesas/r8a73a4.dtsi index 9a2ae282a46b..85261684b5d5 100644 --- a/arch/arm/boot/dts/renesas/r8a73a4.dtsi +++ b/arch/arm/boot/dts/renesas/r8a73a4.dtsi @@ -58,6 +58,7 @@ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-names = "sec-phys", "phys", "virt", "hyp-phys"; }; tmu0: timer@e61e0000 { diff --git a/arch/arm/boot/dts/renesas/r8a7742.dtsi b/arch/arm/boot/dts/renesas/r8a7742.dtsi index d55c344c1cd2..3a5d6b434d09 100644 --- a/arch/arm/boot/dts/renesas/r8a7742.dtsi +++ b/arch/arm/boot/dts/renesas/r8a7742.dtsi @@ -1938,6 +1938,7 @@ <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-names = "sec-phys", "phys", "virt", "hyp-phys"; }; /* External USB clock - can be overridden by the board */ diff --git a/arch/arm/boot/dts/renesas/r8a7743.dtsi b/arch/arm/boot/dts/renesas/r8a7743.dtsi index d917c0a971f5..8833898d5557 100644 --- a/arch/arm/boot/dts/renesas/r8a7743.dtsi +++ b/arch/arm/boot/dts/renesas/r8a7743.dtsi @@ -1846,6 +1846,7 @@ <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-names = "sec-phys", "phys", "virt", "hyp-phys"; }; /* External USB clock - can be overridden by the board */ diff --git a/arch/arm/boot/dts/renesas/r8a7744.dtsi b/arch/arm/boot/dts/renesas/r8a7744.dtsi index 754859c38a93..c66c1102fb72 100644 --- a/arch/arm/boot/dts/renesas/r8a7744.dtsi +++ b/arch/arm/boot/dts/renesas/r8a7744.dtsi @@ -1832,6 +1832,7 @@ <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-names = "sec-phys", "phys", "virt", "hyp-phys"; }; /* External USB clock - can be overridden by the board */ diff --git a/arch/arm/boot/dts/renesas/r8a7745.dtsi b/arch/arm/boot/dts/renesas/r8a7745.dtsi index 168298300490..6ddde364782b 100644 --- a/arch/arm/boot/dts/renesas/r8a7745.dtsi +++ b/arch/arm/boot/dts/renesas/r8a7745.dtsi @@ -1636,6 +1636,7 @@ <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-names = "sec-phys", "phys", "virt", "hyp-phys"; }; /* External USB clock - can be overridden by the board */ diff --git a/arch/arm/boot/dts/renesas/r8a77470.dtsi b/arch/arm/boot/dts/renesas/r8a77470.dtsi index 2375438d83c9..a8a12275c98a 100644 --- a/arch/arm/boot/dts/renesas/r8a77470.dtsi +++ b/arch/arm/boot/dts/renesas/r8a77470.dtsi @@ -1061,6 +1061,7 @@ <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-names = "sec-phys", "phys", "virt", "hyp-phys"; }; /* External USB clock - can be overridden by the board */ diff --git a/arch/arm/boot/dts/renesas/r8a7790.dtsi b/arch/arm/boot/dts/renesas/r8a7790.dtsi index 583b74a9f071..20e4d4c6e748 100644 --- a/arch/arm/boot/dts/renesas/r8a7790.dtsi +++ b/arch/arm/boot/dts/renesas/r8a7790.dtsi @@ -2012,6 +2012,7 @@ <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-names = "sec-phys", "phys", "virt", "hyp-phys"; }; /* External USB clock - can be overridden by the board */ diff --git a/arch/arm/boot/dts/renesas/r8a7791.dtsi b/arch/arm/boot/dts/renesas/r8a7791.dtsi index de08ceb62230..f9c9e1d8f669 100644 --- a/arch/arm/boot/dts/renesas/r8a7791.dtsi +++ b/arch/arm/boot/dts/renesas/r8a7791.dtsi @@ -1938,6 +1938,7 @@ <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-names = "sec-phys", "phys", "virt", "hyp-phys"; }; /* External USB clock - can be overridden by the board */ diff --git a/arch/arm/boot/dts/renesas/r8a7792.dtsi b/arch/arm/boot/dts/renesas/r8a7792.dtsi index 7defeb8e4cd1..dd3bc32668b7 100644 --- a/arch/arm/boot/dts/renesas/r8a7792.dtsi +++ b/arch/arm/boot/dts/renesas/r8a7792.dtsi @@ -990,5 +990,6 @@ <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-names = "sec-phys", "phys", "virt", "hyp-phys"; }; }; diff --git a/arch/arm/boot/dts/renesas/r8a7793.dtsi b/arch/arm/boot/dts/renesas/r8a7793.dtsi index d32a9d5d3faa..24e66ddf37e0 100644 --- a/arch/arm/boot/dts/renesas/r8a7793.dtsi +++ b/arch/arm/boot/dts/renesas/r8a7793.dtsi @@ -1517,6 +1517,7 @@ <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-names = "sec-phys", "phys", "virt", "hyp-phys"; }; /* External USB clock - can be overridden by the board */ diff --git a/arch/arm/boot/dts/renesas/r8a7794.dtsi b/arch/arm/boot/dts/renesas/r8a7794.dtsi index f37f094cecc8..8e6386a79aea 100644 --- a/arch/arm/boot/dts/renesas/r8a7794.dtsi +++ b/arch/arm/boot/dts/renesas/r8a7794.dtsi @@ -1484,6 +1484,7 @@ <&gic GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, <&gic GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-names = "sec-phys", "phys", "virt", "hyp-phys"; }; /* External USB clock - can be overridden by the board */ diff --git a/arch/arm/boot/dts/renesas/r9a06g032.dtsi b/arch/arm/boot/dts/renesas/r9a06g032.dtsi index 45f60eeeaaa1..7548291c8d7e 100644 --- a/arch/arm/boot/dts/renesas/r9a06g032.dtsi +++ b/arch/arm/boot/dts/renesas/r9a06g032.dtsi @@ -316,6 +316,24 @@ data-width = <8>; }; + gmac1: ethernet@44000000 { + compatible = "renesas,r9a06g032-gmac", "renesas,rzn1-gmac", "snps,dwmac"; + reg = <0x44000000 0x2000>; + interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq", "eth_wake_irq", "eth_lpi"; + clocks = <&sysctrl R9A06G032_HCLK_GMAC0>; + clock-names = "stmmaceth"; + power-domains = <&sysctrl>; + snps,multicast-filter-bins = <256>; + snps,perfect-filter-entries = <128>; + tx-fifo-depth = <2048>; + rx-fifo-depth = <4096>; + pcs-handle = <&mii_conv1>; + status = "disabled"; + }; + gmac2: ethernet@44002000 { compatible = "renesas,r9a06g032-gmac", "renesas,rzn1-gmac", "snps,dwmac"; reg = <0x44002000 0x2000>; @@ -466,6 +484,7 @@ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + interrupt-names = "sec-phys", "phys", "virt", "hyp-phys"; }; usbphy: usb-phy { diff --git a/arch/arm/boot/dts/rockchip/rk3036.dtsi b/arch/arm/boot/dts/rockchip/rk3036.dtsi index 04af224005f8..96279d1e02fe 100644 --- a/arch/arm/boot/dts/rockchip/rk3036.dtsi +++ b/arch/arm/boot/dts/rockchip/rk3036.dtsi @@ -402,6 +402,7 @@ rockchip,grf = <&grf>; pinctrl-names = "default"; pinctrl-0 = <&hdmi_ctl>; + #sound-dai-cells = <0>; status = "disabled"; ports { diff --git a/arch/arm/boot/dts/rockchip/rk3066a-mk808.dts b/arch/arm/boot/dts/rockchip/rk3066a-mk808.dts index 06790f05b395..4de9a45c4883 100644 --- a/arch/arm/boot/dts/rockchip/rk3066a-mk808.dts +++ b/arch/arm/boot/dts/rockchip/rk3066a-mk808.dts @@ -143,6 +143,14 @@ }; }; +&hdmi_sound { + status = "okay"; +}; + +&i2s0 { + status = "okay"; +}; + &mmc0 { bus-width = <4>; cap-mmc-highspeed; diff --git a/arch/arm/boot/dts/rockchip/rk3066a.dtsi b/arch/arm/boot/dts/rockchip/rk3066a.dtsi index 15cbd94d7ec0..5e0750547ab5 100644 --- a/arch/arm/boot/dts/rockchip/rk3066a.dtsi +++ b/arch/arm/boot/dts/rockchip/rk3066a.dtsi @@ -53,6 +53,22 @@ ports = <&vop0_out>, <&vop1_out>; }; + hdmi_sound: hdmi-sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "HDMI"; + simple-audio-card,format = "i2s"; + simple-audio-card,mclk-fs = <256>; + status = "disabled"; + + simple-audio-card,codec { + sound-dai = <&hdmi>; + }; + + simple-audio-card,cpu { + sound-dai = <&i2s0>; + }; + }; + sram: sram@10080000 { compatible = "mmio-sram"; reg = <0x10080000 0x10000>; diff --git a/arch/arm/boot/dts/rockchip/rk3128.dtsi b/arch/arm/boot/dts/rockchip/rk3128.dtsi index fb98873fd94e..23e633387c24 100644 --- a/arch/arm/boot/dts/rockchip/rk3128.dtsi +++ b/arch/arm/boot/dts/rockchip/rk3128.dtsi @@ -216,6 +216,8 @@ <&cru ACLK_LCDC0>, <&cru HCLK_LCDC0>, <&cru PCLK_MIPI>, + <&cru PCLK_MIPIPHY>, + <&cru SCLK_MIPI_24M>, <&cru ACLK_RGA>, <&cru HCLK_RGA>, <&cru ACLK_VIO0>, @@ -275,6 +277,43 @@ reg = <0>; remote-endpoint = <&hdmi_in_vop>; }; + + vop_out_dsi: endpoint@1 { + reg = <1>; + remote-endpoint = <&dsi_in_vop>; + }; + }; + }; + + dsi: dsi@10110000 { + compatible = "rockchip,rk3128-mipi-dsi", "snps,dw-mipi-dsi"; + reg = <0x10110000 0x4000>; + interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru PCLK_MIPI>; + clock-names = "pclk"; + phys = <&dphy>; + phy-names = "dphy"; + power-domains = <&power RK3128_PD_VIO>; + resets = <&cru SRST_VIO_MIPI_DSI>; + reset-names = "apb"; + rockchip,grf = <&grf>; + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + dsi_in: port@0 { + reg = <0>; + + dsi_in_vop: endpoint { + remote-endpoint = <&vop_out_dsi>; + }; + }; + + dsi_out: port@1 { + reg = <1>; + }; }; }; @@ -360,6 +399,41 @@ status = "disabled"; }; + i2s_8ch: i2s@10200000 { + compatible = "rockchip,rk3128-i2s", "rockchip,rk3066-i2s"; + reg = <0x10200000 0x1000>; + interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_I2S0>, <&cru HCLK_I2S_8CH>; + clock-names = "i2s_clk", "i2s_hclk"; + dmas = <&pdma 14>, <&pdma 15>; + dma-names = "tx", "rx"; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + spdif: spdif@10204000 { + compatible = "rockchip,rk3128-spdif", "rockchip,rk3066-spdif"; + reg = <0x10204000 0x1000>; + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_SPDIF>, <&cru HCLK_SPDIF>; + clock-names = "mclk", "hclk"; + dmas = <&pdma 13>; + dma-names = "tx"; + pinctrl-names = "default"; + pinctrl-0 = <&spdif_tx>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + + sfc: spi@1020c000 { + compatible = "rockchip,sfc"; + reg = <0x1020c000 0x8000>; + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_SFC>, <&cru 479>; + clock-names = "clk_sfc", "hclk_sfc"; + status = "disabled"; + }; + sdmmc: mmc@10214000 { compatible = "rockchip,rk3128-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x10214000 0x4000>; @@ -408,6 +482,21 @@ status = "disabled"; }; + i2s_2ch: i2s@10220000 { + compatible = "rockchip,rk3128-i2s", "rockchip,rk3066-i2s"; + reg = <0x10220000 0x1000>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru SCLK_I2S1>, <&cru HCLK_I2S_2CH>; + clock-names = "i2s_clk", "i2s_hclk"; + dmas = <&pdma 0>, <&pdma 1>; + dma-names = "tx", "rx"; + rockchip,playback-channels = <2>; + pinctrl-names = "default"; + pinctrl-0 = <&i2s_bus>; + #sound-dai-cells = <0>; + status = "disabled"; + }; + nfc: nand-controller@10500000 { compatible = "rockchip,rk3128-nfc", "rockchip,rk2928-nfc"; reg = <0x10500000 0x4000>; @@ -477,6 +566,7 @@ pinctrl-names = "default"; pinctrl-0 = <&hdmii2c_xfer &hdmi_hpd &hdmi_cec>; power-domains = <&power RK3128_PD_VIO>; + #sound-dai-cells = <0>; status = "disabled"; ports { @@ -496,6 +586,18 @@ }; }; + dphy: phy@20038000 { + compatible = "rockchip,rk3128-dsi-dphy"; + reg = <0x20038000 0x4000>; + clocks = <&cru SCLK_MIPI_24M>, <&cru PCLK_MIPIPHY>; + clock-names = "ref", "pclk"; + #phy-cells = <0>; + power-domains = <&power RK3128_PD_VIO>; + resets = <&cru SRST_MIPIPHY_P>; + reset-names = "apb"; + status = "disabled"; + }; + timer0: timer@20044000 { compatible = "rockchip,rk3128-timer", "rockchip,rk3288-timer"; reg = <0x20044000 0x20>; @@ -1104,6 +1206,32 @@ }; }; + sfc { + sfc_bus2: sfc-bus2 { + rockchip,pins = <1 RK_PD0 3 &pcfg_pull_default>, + <1 RK_PD1 3 &pcfg_pull_default>; + }; + + sfc_bus4: sfc-bus4 { + rockchip,pins = <1 RK_PD0 3 &pcfg_pull_default>, + <1 RK_PD1 3 &pcfg_pull_default>, + <1 RK_PD2 3 &pcfg_pull_default>, + <1 RK_PD3 3 &pcfg_pull_default>; + }; + + sfc_clk: sfc-clk { + rockchip,pins = <2 RK_PA4 3 &pcfg_pull_none>; + }; + + sfc_cs0: sfc-cs0 { + rockchip,pins = <2 RK_PA2 2 &pcfg_pull_default>; + }; + + sfc_cs1: sfc-cs1 { + rockchip,pins = <2 RK_PA3 2 &pcfg_pull_default>; + }; + }; + spdif { spdif_tx: spdif-tx { rockchip,pins = <3 RK_PD3 1 &pcfg_pull_none>; diff --git a/arch/arm/boot/dts/rockchip/rv1126-edgeble-neu2-io.dts b/arch/arm/boot/dts/rockchip/rv1126-edgeble-neu2-io.dts index 0c2396b8f8db..7707d1b01440 100644 --- a/arch/arm/boot/dts/rockchip/rv1126-edgeble-neu2-io.dts +++ b/arch/arm/boot/dts/rockchip/rv1126-edgeble-neu2-io.dts @@ -69,8 +69,7 @@ &mdio { phy: ethernet-phy@0 { - compatible = "ethernet-phy-id001c.c916", - "ethernet-phy-ieee802.3-c22"; + compatible = "ethernet-phy-id001c.c916"; reg = <0x0>; pinctrl-names = "default"; pinctrl-0 = <ð_phy_rst>; diff --git a/arch/arm/boot/dts/st/Makefile b/arch/arm/boot/dts/st/Makefile index 9fedd6776208..015903d09323 100644 --- a/arch/arm/boot/dts/st/Makefile +++ b/arch/arm/boot/dts/st/Makefile @@ -29,6 +29,7 @@ dtb-$(CONFIG_ARCH_STM32) += \ stm32h743i-eval.dtb \ stm32h743i-disco.dtb \ stm32h750i-art-pi.dtb \ + stm32mp135f-dhcor-dhsbc.dtb \ stm32mp135f-dk.dtb \ stm32mp151a-prtt1a.dtb \ stm32mp151a-prtt1c.dtb \ diff --git a/arch/arm/boot/dts/st/stih407-family.dtsi b/arch/arm/boot/dts/st/stih407-family.dtsi index 29302e74aa1d..35a55aef7f4b 100644 --- a/arch/arm/boot/dts/st/stih407-family.dtsi +++ b/arch/arm/boot/dts/st/stih407-family.dtsi @@ -33,7 +33,7 @@ cpus { #address-cells = <1>; #size-cells = <0>; - cpu@0 { + cpu0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <0>; @@ -52,8 +52,9 @@ clock-latency = <100000>; cpu0-supply = <&pwm_regulator>; st,syscfg = <&syscfg_core 0x8e0>; + #cooling-cells = <2>; }; - cpu@1 { + cpu1: cpu@1 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <1>; @@ -66,6 +67,7 @@ 1200000 0 800000 0 500000 0>; + #cooling-cells = <2>; }; }; diff --git a/arch/arm/boot/dts/st/stih410.dtsi b/arch/arm/boot/dts/st/stih410.dtsi index 29e95e9d3229..a69231854f78 100644 --- a/arch/arm/boot/dts/st/stih410.dtsi +++ b/arch/arm/boot/dts/st/stih410.dtsi @@ -270,6 +270,7 @@ clock-names = "thermal"; clocks = <&clk_sysin>; interrupts = <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>; + #thermal-sensor-cells = <0>; }; cec@94a087c { diff --git a/arch/arm/boot/dts/st/stih418.dtsi b/arch/arm/boot/dts/st/stih418.dtsi index b35b9b7a7ccc..8fb8b3af5e49 100644 --- a/arch/arm/boot/dts/st/stih418.dtsi +++ b/arch/arm/boot/dts/st/stih418.dtsi @@ -6,23 +6,26 @@ #include "stih418-clock.dtsi" #include "stih407-family.dtsi" #include "stih410-pinctrl.dtsi" +#include <dt-bindings/thermal/thermal.h> / { cpus { #address-cells = <1>; #size-cells = <0>; - cpu@2 { + cpu2: cpu@2 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <2>; /* u-boot puts hpen in SBC dmem at 0xa4 offset */ cpu-release-addr = <0x94100A4>; + #cooling-cells = <2>; }; - cpu@3 { + cpu3: cpu@3 { device_type = "cpu"; compatible = "arm,cortex-a9"; reg = <3>; /* u-boot puts hpen in SBC dmem at 0xa4 offset */ cpu-release-addr = <0x94100A4>; + #cooling-cells = <2>; }; }; @@ -44,6 +47,38 @@ reset-names = "global", "port"; }; + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay-passive = <250>; /* 250ms */ + polling-delay = <1000>; /* 1000ms */ + + thermal-sensors = <&thermal>; + + trips { + cpu_crit: cpu-crit { + temperature = <95000>; /* 95C */ + hysteresis = <2000>; + type = "critical"; + }; + cpu_alert: cpu-alert { + temperature = <85000>; /* 85C */ + hysteresis = <2000>; + type = "passive"; + }; + }; + + cooling-maps { + map { + trip = <&cpu_alert>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; + soc { rng11: rng@8a8a000 { status = "disabled"; @@ -107,12 +142,13 @@ assigned-clock-rates = <200000000>; }; - thermal@91a0000 { + thermal: thermal@91a0000 { compatible = "st,stih407-thermal"; reg = <0x91a0000 0x28>; clock-names = "thermal"; clocks = <&clk_sysin>; interrupts = <GIC_SPI 205 IRQ_TYPE_EDGE_RISING>; + #thermal-sensor-cells = <0>; }; }; }; diff --git a/arch/arm/boot/dts/st/stm32f429.dtsi b/arch/arm/boot/dts/st/stm32f429.dtsi index 8efcda9ef8ae..ad91b74ddd0d 100644 --- a/arch/arm/boot/dts/st/stm32f429.dtsi +++ b/arch/arm/boot/dts/st/stm32f429.dtsi @@ -579,6 +579,7 @@ syscfg: syscon@40013800 { compatible = "st,stm32-syscfg", "syscon"; reg = <0x40013800 0x400>; + clocks = <&rcc 0 STM32F4_APB2_CLOCK(SYSCFG)>; }; exti: interrupt-controller@40013c00 { diff --git a/arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi b/arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi index 32c5d8a1e06a..c9f588a65094 100644 --- a/arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi +++ b/arch/arm/boot/dts/st/stm32mp13-pinctrl.dtsi @@ -6,6 +6,14 @@ #include <dt-bindings/pinctrl/stm32-pinfunc.h> &pinctrl { + /omit-if-no-ref/ + adc1_pins_a: adc1-pins-0 { + pins { + pinmux = <STM32_PINMUX('A', 3, ANALOG)>; /* ADC1 in12 */ + }; + }; + + /omit-if-no-ref/ adc1_usb_cc_pins_a: adc1-usb-cc-pins-0 { pins { pinmux = <STM32_PINMUX('F', 12, ANALOG)>, /* ADC1 in6 */ @@ -13,6 +21,241 @@ }; }; + /omit-if-no-ref/ + adc1_usb_cc_pins_b: adc1-usb-cc-pins-1 { + pins { + pinmux = <STM32_PINMUX('A', 5, ANALOG)>, /* ADC1_INP2 */ + <STM32_PINMUX('F', 13, ANALOG)>; /* ADC1_INP11 */ + }; + }; + + /omit-if-no-ref/ + dcmipp_pins_a: dcmi-0 { + pins1 { + pinmux = <STM32_PINMUX('H', 8, AF13)>,/* DCMI_HSYNC */ + <STM32_PINMUX('G', 9, AF13)>,/* DCMI_VSYNC */ + <STM32_PINMUX('B', 7, AF14)>,/* DCMI_PIXCLK */ + <STM32_PINMUX('A', 9, AF13)>,/* DCMI_D0 */ + <STM32_PINMUX('D', 0, AF13)>,/* DCMI_D1 */ + <STM32_PINMUX('G', 10, AF13)>,/* DCMI_D2 */ + <STM32_PINMUX('E', 4, AF13)>,/* DCMI_D3 */ + <STM32_PINMUX('D', 11, AF14)>,/* DCMI_D4 */ + <STM32_PINMUX('D', 3, AF13)>,/* DCMI_D5 */ + <STM32_PINMUX('B', 8, AF13)>,/* DCMI_D6 */ + <STM32_PINMUX('E', 14, AF13)>;/* DCMI_D7 */ + bias-disable; + }; + }; + + /omit-if-no-ref/ + dcmipp_sleep_pins_a: dcmi-sleep-0 { + pins1 { + pinmux = <STM32_PINMUX('H', 8, ANALOG)>,/* DCMI_HSYNC */ + <STM32_PINMUX('G', 9, ANALOG)>,/* DCMI_VSYNC */ + <STM32_PINMUX('B', 7, ANALOG)>,/* DCMI_PIXCLK */ + <STM32_PINMUX('A', 9, ANALOG)>,/* DCMI_D0 */ + <STM32_PINMUX('D', 0, ANALOG)>,/* DCMI_D1 */ + <STM32_PINMUX('G', 10, ANALOG)>,/* DCMI_D2 */ + <STM32_PINMUX('E', 4, ANALOG)>,/* DCMI_D3 */ + <STM32_PINMUX('D', 11, ANALOG)>,/* DCMI_D4 */ + <STM32_PINMUX('D', 3, ANALOG)>,/* DCMI_D5 */ + <STM32_PINMUX('B', 8, ANALOG)>,/* DCMI_D6 */ + <STM32_PINMUX('E', 14, ANALOG)>;/* DCMI_D7 */ + }; + }; + + /omit-if-no-ref/ + eth1_rgmii_pins_a: eth1-rgmii-0 { + pins1 { + pinmux = <STM32_PINMUX('G', 13, AF11)>, /* ETH_RGMII_TXD0 */ + <STM32_PINMUX('G', 14, AF11)>, /* ETH_RGMII_TXD1 */ + <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */ + <STM32_PINMUX('E', 5, AF10)>, /* ETH_RGMII_TXD3 */ + <STM32_PINMUX('B', 11, AF11)>, /* ETH_RGMII_TX_CTL */ + <STM32_PINMUX('C', 1, AF11)>, /* ETH_RGMII_GTX_CLK */ + <STM32_PINMUX('A', 2, AF11)>, /* ETH_MDIO */ + <STM32_PINMUX('G', 2, AF11)>; /* ETH_MDC */ + bias-disable; + drive-push-pull; + slew-rate = <2>; + }; + + pins2 { + pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */ + <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */ + <STM32_PINMUX('B', 0, AF11)>, /* ETH_RGMII_RXD2 */ + <STM32_PINMUX('B', 1, AF11)>, /* ETH_RGMII_RXD3 */ + <STM32_PINMUX('A', 7, AF11)>, /* ETH_RGMII_RX_CTL */ + <STM32_PINMUX('D', 7, AF10)>; /* ETH_RGMII_RX_CLK */ + bias-disable; + }; + }; + + /omit-if-no-ref/ + eth1_rgmii_sleep_pins_a: eth1-rgmii-sleep-0 { + pins1 { + pinmux = <STM32_PINMUX('G', 13, ANALOG)>, /* ETH_RGMII_TXD0 */ + <STM32_PINMUX('G', 14, ANALOG)>, /* ETH_RGMII_TXD1 */ + <STM32_PINMUX('C', 2, ANALOG)>, /* ETH_RGMII_TXD2 */ + <STM32_PINMUX('E', 5, ANALOG)>, /* ETH_RGMII_TXD3 */ + <STM32_PINMUX('B', 11, ANALOG)>, /* ETH_RGMII_TX_CTL */ + <STM32_PINMUX('C', 1, ANALOG)>, /* ETH_RGMII_GTX_CLK */ + <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */ + <STM32_PINMUX('G', 2, ANALOG)>, /* ETH_MDC */ + <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RGMII_RXD0 */ + <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RGMII_RXD1 */ + <STM32_PINMUX('B', 0, ANALOG)>, /* ETH_RGMII_RXD1 */ + <STM32_PINMUX('B', 1, ANALOG)>, /* ETH_RGMII_RXD1 */ + <STM32_PINMUX('A', 7, ANALOG)>, /* ETH_RGMII_RX_CTL */ + <STM32_PINMUX('D', 7, ANALOG)>; /* ETH_RGMII_RX_CLK */ + }; + }; + + /omit-if-no-ref/ + eth1_rmii_pins_a: eth1-rmii-0 { + pins1 { + pinmux = <STM32_PINMUX('G', 13, AF11)>, /* ETH_RMII_TXD0 */ + <STM32_PINMUX('G', 14, AF11)>, /* ETH_RMII_TXD1 */ + <STM32_PINMUX('B', 11, AF11)>, /* ETH_RMII_TX_EN */ + <STM32_PINMUX('A', 1, AF11)>, /* ETH_RMII_REF_CLK */ + <STM32_PINMUX('A', 2, AF11)>, /* ETH_MDIO */ + <STM32_PINMUX('G', 2, AF11)>; /* ETH_MDC */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + + pins2 { + pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RMII_RXD0 */ + <STM32_PINMUX('C', 5, AF11)>, /* ETH_RMII_RXD1 */ + <STM32_PINMUX('C', 1, AF10)>; /* ETH_RMII_CRS_DV */ + bias-disable; + }; + }; + + /omit-if-no-ref/ + eth1_rmii_sleep_pins_a: eth1-rmii-sleep-0 { + pins1 { + pinmux = <STM32_PINMUX('G', 13, ANALOG)>, /* ETH_RMII_TXD0 */ + <STM32_PINMUX('G', 14, ANALOG)>, /* ETH_RMII_TXD1 */ + <STM32_PINMUX('B', 11, ANALOG)>, /* ETH_RMII_TX_EN */ + <STM32_PINMUX('A', 1, ANALOG)>, /* ETH_RMII_REF_CLK */ + <STM32_PINMUX('A', 2, ANALOG)>, /* ETH_MDIO */ + <STM32_PINMUX('G', 2, ANALOG)>, /* ETH_MDC */ + <STM32_PINMUX('C', 4, ANALOG)>, /* ETH_RMII_RXD0 */ + <STM32_PINMUX('C', 5, ANALOG)>, /* ETH_RMII_RXD1 */ + <STM32_PINMUX('C', 1, ANALOG)>; /* ETH_RMII_CRS_DV */ + }; + }; + + /omit-if-no-ref/ + eth2_rgmii_pins_a: eth2-rgmii-0 { + pins1 { + pinmux = <STM32_PINMUX('F', 7, AF11)>, /* ETH_RGMII_TXD0 */ + <STM32_PINMUX('G', 11, AF10)>, /* ETH_RGMII_TXD1 */ + <STM32_PINMUX('G', 1, AF10)>, /* ETH_RGMII_TXD2 */ + <STM32_PINMUX('E', 6, AF11)>, /* ETH_RGMII_TXD3 */ + <STM32_PINMUX('F', 6, AF11)>, /* ETH_RGMII_TX_CTL */ + <STM32_PINMUX('G', 3, AF10)>, /* ETH_RGMII_GTX_CLK */ + <STM32_PINMUX('B', 6, AF11)>, /* ETH_MDIO */ + <STM32_PINMUX('G', 5, AF10)>; /* ETH_MDC */ + bias-disable; + drive-push-pull; + slew-rate = <2>; + }; + + pins2 { + pinmux = <STM32_PINMUX('F', 4, AF11)>, /* ETH_RGMII_RXD0 */ + <STM32_PINMUX('E', 2, AF10)>, /* ETH_RGMII_RXD1 */ + <STM32_PINMUX('H', 6, AF12)>, /* ETH_RGMII_RXD2 */ + <STM32_PINMUX('A', 8, AF11)>, /* ETH_RGMII_RXD3 */ + <STM32_PINMUX('A', 12, AF11)>, /* ETH_RGMII_RX_CTL */ + <STM32_PINMUX('H', 11, AF11)>; /* ETH_RGMII_RX_CLK */ + bias-disable; + }; + }; + + /omit-if-no-ref/ + eth2_rgmii_sleep_pins_a: eth2-rgmii-sleep-0 { + pins1 { + pinmux = <STM32_PINMUX('F', 7, ANALOG)>, /* ETH_RGMII_TXD0 */ + <STM32_PINMUX('G', 11, ANALOG)>, /* ETH_RGMII_TXD1 */ + <STM32_PINMUX('G', 1, ANALOG)>, /* ETH_RGMII_TXD2 */ + <STM32_PINMUX('E', 6, ANALOG)>, /* ETH_RGMII_TXD3 */ + <STM32_PINMUX('F', 6, ANALOG)>, /* ETH_RGMII_TX_CTL */ + <STM32_PINMUX('G', 3, ANALOG)>, /* ETH_RGMII_GTX_CLK */ + <STM32_PINMUX('B', 6, ANALOG)>, /* ETH_MDIO */ + <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_MDC */ + <STM32_PINMUX('F', 4, ANALOG)>, /* ETH_RGMII_RXD0 */ + <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RGMII_RXD1 */ + <STM32_PINMUX('H', 6, ANALOG)>, /* ETH_RGMII_RXD2 */ + <STM32_PINMUX('A', 8, ANALOG)>, /* ETH_RGMII_RXD3 */ + <STM32_PINMUX('A', 12, ANALOG)>, /* ETH_RGMII_RX_CTL */ + <STM32_PINMUX('H', 11, ANALOG)>; /* ETH_RGMII_RX_CLK */ + }; + }; + + /omit-if-no-ref/ + eth2_rmii_pins_a: eth2-rmii-0 { + pins1 { + pinmux = <STM32_PINMUX('F', 7, AF11)>, /* ETH_RMII_TXD0 */ + <STM32_PINMUX('G', 11, AF10)>, /* ETH_RMII_TXD1 */ + <STM32_PINMUX('G', 8, AF13)>, /* ETH_RMII_ETHCK */ + <STM32_PINMUX('F', 6, AF11)>, /* ETH_RMII_TX_EN */ + <STM32_PINMUX('B', 2, AF11)>, /* ETH_MDIO */ + <STM32_PINMUX('G', 5, AF10)>; /* ETH_MDC */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + + pins2 { + pinmux = <STM32_PINMUX('F', 4, AF11)>, /* ETH_RMII_RXD0 */ + <STM32_PINMUX('E', 2, AF10)>, /* ETH_RMII_RXD1 */ + <STM32_PINMUX('A', 12, AF11)>; /* ETH_RMII_CRS_DV */ + bias-disable; + }; + }; + + /omit-if-no-ref/ + eth2_rmii_sleep_pins_a: eth2-rmii-sleep-0 { + pins1 { + pinmux = <STM32_PINMUX('F', 7, ANALOG)>, /* ETH_RMII_TXD0 */ + <STM32_PINMUX('G', 11, ANALOG)>, /* ETH_RMII_TXD1 */ + <STM32_PINMUX('G', 8, ANALOG)>, /* ETH_RMII_ETHCK */ + <STM32_PINMUX('F', 6, ANALOG)>, /* ETH_RMII_TX_EN */ + <STM32_PINMUX('B', 2, ANALOG)>, /* ETH_MDIO */ + <STM32_PINMUX('G', 5, ANALOG)>, /* ETH_MDC */ + <STM32_PINMUX('F', 4, ANALOG)>, /* ETH_RMII_RXD0 */ + <STM32_PINMUX('E', 2, ANALOG)>, /* ETH_RMII_RXD1 */ + <STM32_PINMUX('A', 12, ANALOG)>; /* ETH_RMII_CRS_DV */ + }; + }; + + /omit-if-no-ref/ + goodix_pins_a: goodix-0 { + /* + * touchscreen reset needs to be configured + * via the pinctrl not the driver (a pull-down resistor + * has been soldered onto the reset line which forces + * the touchscreen to reset state). + */ + pins1 { + pinmux = <STM32_PINMUX('H', 2, GPIO)>; + output-high; + bias-pull-up; + }; + /* + * Interrupt line must have a pull-down resistor + * in order to freeze the i2c address at 0x5D + */ + pins2 { + pinmux = <STM32_PINMUX('F', 5, GPIO)>; + bias-pull-down; + }; + }; + + /omit-if-no-ref/ i2c1_pins_a: i2c1-0 { pins { pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */ @@ -23,6 +266,7 @@ }; }; + /omit-if-no-ref/ i2c1_sleep_pins_a: i2c1-sleep-0 { pins { pinmux = <STM32_PINMUX('D', 12, ANALOG)>, /* I2C1_SCL */ @@ -30,6 +274,7 @@ }; }; + /omit-if-no-ref/ i2c5_pins_a: i2c5-0 { pins { pinmux = <STM32_PINMUX('D', 1, AF4)>, /* I2C5_SCL */ @@ -40,6 +285,7 @@ }; }; + /omit-if-no-ref/ i2c5_sleep_pins_a: i2c5-sleep-0 { pins { pinmux = <STM32_PINMUX('D', 1, ANALOG)>, /* I2C5_SCL */ @@ -47,6 +293,26 @@ }; }; + /omit-if-no-ref/ + i2c5_pins_b: i2c5-1 { + pins { + pinmux = <STM32_PINMUX('D', 1, AF4)>, /* I2C5_SCL */ + <STM32_PINMUX('E', 13, AF4)>; /* I2C5_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + /omit-if-no-ref/ + i2c5_sleep_pins_b: i2c5-sleep-1 { + pins { + pinmux = <STM32_PINMUX('D', 1, ANALOG)>, /* I2C5_SCL */ + <STM32_PINMUX('E', 13, ANALOG)>; /* I2C5_SDA */ + }; + }; + + /omit-if-no-ref/ ltdc_pins_a: ltdc-0 { pins { pinmux = <STM32_PINMUX('D', 9, AF13)>, /* LCD_CLK */ @@ -77,6 +343,7 @@ }; }; + /omit-if-no-ref/ ltdc_sleep_pins_a: ltdc-sleep-0 { pins { pinmux = <STM32_PINMUX('D', 9, ANALOG)>, /* LCD_CLK */ @@ -104,6 +371,51 @@ }; }; + /omit-if-no-ref/ + m_can1_pins_a: m-can1-0 { + pins1 { + pinmux = <STM32_PINMUX('G', 10, AF9)>; /* CAN1_TX */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = <STM32_PINMUX('D', 0, AF9)>; /* CAN1_RX */ + bias-disable; + }; + }; + + /omit-if-no-ref/ + m_can1_sleep_pins_a: m_can1-sleep-0 { + pins { + pinmux = <STM32_PINMUX('G', 10, ANALOG)>, /* CAN1_TX */ + <STM32_PINMUX('D', 0, ANALOG)>; /* CAN1_RX */ + }; + }; + + /omit-if-no-ref/ + m_can2_pins_a: m-can2-0 { + pins1 { + pinmux = <STM32_PINMUX('G', 0, AF9)>; /* CAN2_TX */ + slew-rate = <1>; + drive-push-pull; + bias-disable; + }; + pins2 { + pinmux = <STM32_PINMUX('E', 0, AF9)>; /* CAN2_RX */ + bias-disable; + }; + }; + + /omit-if-no-ref/ + m_can2_sleep_pins_a: m_can2-sleep-0 { + pins { + pinmux = <STM32_PINMUX('G', 0, ANALOG)>, /* CAN2_TX */ + <STM32_PINMUX('E', 0, ANALOG)>; /* CAN2_RX */ + }; + }; + + /omit-if-no-ref/ mcp23017_pins_a: mcp23017-0 { pins { pinmux = <STM32_PINMUX('G', 12, GPIO)>; @@ -111,6 +423,7 @@ }; }; + /omit-if-no-ref/ pwm3_pins_a: pwm3-0 { pins { pinmux = <STM32_PINMUX('B', 1, AF2)>; /* TIM3_CH4 */ @@ -120,12 +433,14 @@ }; }; + /omit-if-no-ref/ pwm3_sleep_pins_a: pwm3-sleep-0 { pins { pinmux = <STM32_PINMUX('B', 1, ANALOG)>; /* TIM3_CH4 */ }; }; + /omit-if-no-ref/ pwm4_pins_a: pwm4-0 { pins { pinmux = <STM32_PINMUX('D', 13, AF2)>; /* TIM4_CH2 */ @@ -135,12 +450,31 @@ }; }; + /omit-if-no-ref/ pwm4_sleep_pins_a: pwm4-sleep-0 { pins { pinmux = <STM32_PINMUX('D', 13, ANALOG)>; /* TIM4_CH2 */ }; }; + /omit-if-no-ref/ + pwm5_pins_a: pwm5-0 { + pins { + pinmux = <STM32_PINMUX('H', 12, AF2)>; /* TIM5_CH3 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + /omit-if-no-ref/ + pwm5_sleep_pins_a: pwm5-sleep-0 { + pins { + pinmux = <STM32_PINMUX('H', 12, ANALOG)>; /* TIM5_CH3 */ + }; + }; + + /omit-if-no-ref/ pwm8_pins_a: pwm8-0 { pins { pinmux = <STM32_PINMUX('E', 5, AF3)>; /* TIM8_CH3 */ @@ -150,12 +484,31 @@ }; }; + /omit-if-no-ref/ pwm8_sleep_pins_a: pwm8-sleep-0 { pins { pinmux = <STM32_PINMUX('E', 5, ANALOG)>; /* TIM8_CH3 */ }; }; + /omit-if-no-ref/ + pwm13_pins_a: pwm13-0 { + pins { + pinmux = <STM32_PINMUX('A', 6, AF9)>; /* TIM13_CH1 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + /omit-if-no-ref/ + pwm13_sleep_pins_a: pwm13-sleep-0 { + pins { + pinmux = <STM32_PINMUX('A', 6, ANALOG)>; /* TIM13_CH1 */ + }; + }; + + /omit-if-no-ref/ pwm14_pins_a: pwm14-0 { pins { pinmux = <STM32_PINMUX('F', 9, AF9)>; /* TIM14_CH1 */ @@ -165,12 +518,107 @@ }; }; + /omit-if-no-ref/ pwm14_sleep_pins_a: pwm14-sleep-0 { pins { pinmux = <STM32_PINMUX('F', 9, ANALOG)>; /* TIM14_CH1 */ }; }; + /omit-if-no-ref/ + qspi_clk_pins_a: qspi-clk-0 { + pins { + pinmux = <STM32_PINMUX('F', 10, AF9)>; /* QSPI_CLK */ + bias-disable; + drive-push-pull; + slew-rate = <3>; + }; + }; + + /omit-if-no-ref/ + qspi_clk_sleep_pins_a: qspi-clk-sleep-0 { + pins { + pinmux = <STM32_PINMUX('F', 10, ANALOG)>; /* QSPI_CLK */ + }; + }; + + /omit-if-no-ref/ + qspi_bk1_pins_a: qspi-bk1-0 { + pins { + pinmux = <STM32_PINMUX('F', 8, AF10)>, /* QSPI_BK1_IO0 */ + <STM32_PINMUX('F', 9, AF10)>, /* QSPI_BK1_IO1 */ + <STM32_PINMUX('D', 11, AF9)>, /* QSPI_BK1_IO2 */ + <STM32_PINMUX('H', 7, AF13)>; /* QSPI_BK1_IO3 */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + }; + + /omit-if-no-ref/ + qspi_bk1_sleep_pins_a: qspi-bk1-sleep-0 { + pins { + pinmux = <STM32_PINMUX('F', 8, ANALOG)>, /* QSPI_BK1_IO0 */ + <STM32_PINMUX('F', 9, ANALOG)>, /* QSPI_BK1_IO1 */ + <STM32_PINMUX('D', 11, ANALOG)>, /* QSPI_BK1_IO2 */ + <STM32_PINMUX('H', 7, ANALOG)>; /* QSPI_BK1_IO3 */ + }; + }; + + /omit-if-no-ref/ + qspi_cs1_pins_a: qspi-cs1-0 { + pins { + pinmux = <STM32_PINMUX('B', 2, AF9)>; /* QSPI_BK1_NCS */ + bias-pull-up; + drive-push-pull; + slew-rate = <1>; + }; + }; + + /omit-if-no-ref/ + qspi_cs1_sleep_pins_a: qspi-cs1-sleep-0 { + pins { + pinmux = <STM32_PINMUX('B', 2, ANALOG)>; /* QSPI_BK1_NCS */ + }; + }; + + /omit-if-no-ref/ + sai1a_pins_a: sai1a-0 { + pins { + pinmux = <STM32_PINMUX('A', 4, AF12)>, /* SAI1_SCK_A */ + <STM32_PINMUX('D', 6, AF6)>, /* SAI1_SD_A */ + <STM32_PINMUX('E', 11, AF6)>; /* SAI1_FS_A */ + slew-rate = <0>; + drive-push-pull; + bias-disable; + }; + }; + + /omit-if-no-ref/ + sai1a_sleep_pins_a: sai1a-sleep-0 { + pins { + pinmux = <STM32_PINMUX('A', 4, ANALOG)>, /* SAI1_SCK_A */ + <STM32_PINMUX('D', 6, ANALOG)>, /* SAI1_SD_A */ + <STM32_PINMUX('E', 11, ANALOG)>; /* SAI1_FS_A */ + }; + }; + + /omit-if-no-ref/ + sai1b_pins_a: sai1b-0 { + pins { + pinmux = <STM32_PINMUX('A', 0, AF6)>; /* SAI1_SD_B */ + bias-disable; + }; + }; + + /omit-if-no-ref/ + sai1b_sleep_pins_a: sai1b-sleep-0 { + pins { + pinmux = <STM32_PINMUX('A', 0, ANALOG)>; /* SAI1_SD_B */ + }; + }; + + /omit-if-no-ref/ sdmmc1_b4_pins_a: sdmmc1-b4-0 { pins { pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */ @@ -184,6 +632,7 @@ }; }; + /omit-if-no-ref/ sdmmc1_b4_od_pins_a: sdmmc1-b4-od-0 { pins1 { pinmux = <STM32_PINMUX('C', 8, AF12)>, /* SDMMC1_D0 */ @@ -202,6 +651,7 @@ }; }; + /omit-if-no-ref/ sdmmc1_b4_sleep_pins_a: sdmmc1-b4-sleep-0 { pins { pinmux = <STM32_PINMUX('C', 8, ANALOG)>, /* SDMMC1_D0 */ @@ -213,6 +663,7 @@ }; }; + /omit-if-no-ref/ sdmmc1_clk_pins_a: sdmmc1-clk-0 { pins { pinmux = <STM32_PINMUX('C', 12, AF12)>; /* SDMMC1_CK */ @@ -222,6 +673,7 @@ }; }; + /omit-if-no-ref/ sdmmc2_b4_pins_a: sdmmc2-b4-0 { pins { pinmux = <STM32_PINMUX('B', 14, AF10)>, /* SDMMC2_D0 */ @@ -235,6 +687,7 @@ }; }; + /omit-if-no-ref/ sdmmc2_b4_od_pins_a: sdmmc2-b4-od-0 { pins1 { pinmux = <STM32_PINMUX('B', 14, AF10)>, /* SDMMC2_D0 */ @@ -253,6 +706,7 @@ }; }; + /omit-if-no-ref/ sdmmc2_b4_sleep_pins_a: sdmmc2-b4-sleep-0 { pins { pinmux = <STM32_PINMUX('B', 14, ANALOG)>, /* SDMMC2_D0 */ @@ -264,6 +718,7 @@ }; }; + /omit-if-no-ref/ sdmmc2_clk_pins_a: sdmmc2-clk-0 { pins { pinmux = <STM32_PINMUX('E', 3, AF10)>; /* SDMMC2_CK */ @@ -273,6 +728,80 @@ }; }; + /omit-if-no-ref/ + sdmmc2_d47_pins_a: sdmmc2-d47-0 { + pins { + pinmux = <STM32_PINMUX('F', 0, AF10)>, /* SDMMC2_D4 */ + <STM32_PINMUX('B', 9, AF10)>, /* SDMMC2_D5 */ + <STM32_PINMUX('C', 6, AF10)>, /* SDMMC2_D6 */ + <STM32_PINMUX('C', 7, AF10)>; /* SDMMC2_D7 */ + slew-rate = <1>; + drive-push-pull; + bias-pull-up; + }; + }; + + /omit-if-no-ref/ + sdmmc2_d47_sleep_pins_a: sdmmc2-d47-sleep-0 { + pins { + pinmux = <STM32_PINMUX('F', 0, ANALOG)>, /* SDMMC2_D4 */ + <STM32_PINMUX('B', 9, ANALOG)>, /* SDMMC2_D5 */ + <STM32_PINMUX('C', 6, ANALOG)>, /* SDMMC2_D6 */ + <STM32_PINMUX('C', 7, ANALOG)>; /* SDMMC2_D7 */ + }; + }; + + /omit-if-no-ref/ + spi2_pins_a: spi2-0 { + pins1 { + pinmux = <STM32_PINMUX('B', 10, AF6)>, /* SPI2_SCK */ + <STM32_PINMUX('H', 10, AF6)>; /* SPI2_MOSI */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + + pins2 { + pinmux = <STM32_PINMUX('B', 5, AF5)>; /* SPI2_MISO */ + bias-disable; + }; + }; + + /omit-if-no-ref/ + spi2_sleep_pins_a: spi2-sleep-0 { + pins { + pinmux = <STM32_PINMUX('B', 10, ANALOG)>, /* SPI2_SCK */ + <STM32_PINMUX('B', 5, ANALOG)>, /* SPI2_MISO */ + <STM32_PINMUX('H', 10, ANALOG)>; /* SPI2_MOSI */ + }; + }; + + /omit-if-no-ref/ + spi3_pins_a: spi3-0 { + pins1 { + pinmux = <STM32_PINMUX('H', 13, AF6)>, /* SPI3_SCK */ + <STM32_PINMUX('F', 1, AF5)>; /* SPI3_MOSI */ + bias-disable; + drive-push-pull; + slew-rate = <1>; + }; + + pins2 { + pinmux = <STM32_PINMUX('D', 4, AF5)>; /* SPI3_MISO */ + bias-disable; + }; + }; + + /omit-if-no-ref/ + spi3_sleep_pins_a: spi3-sleep-0 { + pins { + pinmux = <STM32_PINMUX('H', 13, ANALOG)>, /* SPI3_SCK */ + <STM32_PINMUX('D', 4, ANALOG)>, /* SPI3_MISO */ + <STM32_PINMUX('F', 1, ANALOG)>; /* SPI3_MOSI */ + }; + }; + + /omit-if-no-ref/ spi5_pins_a: spi5-0 { pins1 { pinmux = <STM32_PINMUX('H', 7, AF6)>, /* SPI5_SCK */ @@ -288,6 +817,7 @@ }; }; + /omit-if-no-ref/ spi5_sleep_pins_a: spi5-sleep-0 { pins { pinmux = <STM32_PINMUX('H', 7, ANALOG)>, /* SPI5_SCK */ @@ -296,6 +826,7 @@ }; }; + /omit-if-no-ref/ stm32g0_intn_pins_a: stm32g0-intn-0 { pins { pinmux = <STM32_PINMUX('I', 2, GPIO)>; @@ -303,6 +834,7 @@ }; }; + /omit-if-no-ref/ uart4_pins_a: uart4-0 { pins1 { pinmux = <STM32_PINMUX('D', 6, AF8)>; /* UART4_TX */ @@ -316,6 +848,7 @@ }; }; + /omit-if-no-ref/ uart4_idle_pins_a: uart4-idle-0 { pins1 { pinmux = <STM32_PINMUX('D', 6, ANALOG)>; /* UART4_TX */ @@ -326,6 +859,7 @@ }; }; + /omit-if-no-ref/ uart4_sleep_pins_a: uart4-sleep-0 { pins { pinmux = <STM32_PINMUX('D', 6, ANALOG)>, /* UART4_TX */ @@ -333,6 +867,84 @@ }; }; + /omit-if-no-ref/ + uart4_pins_b: uart4-1 { + pins1 { + pinmux = <STM32_PINMUX('A', 9, AF8)>; /* UART4_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('D', 8, AF8)>; /* UART4_RX */ + bias-pull-up; + }; + }; + + /omit-if-no-ref/ + uart4_idle_pins_b: uart4-idle-1 { + pins1 { + pinmux = <STM32_PINMUX('A', 9, ANALOG)>; /* UART4_TX */ + }; + pins2 { + pinmux = <STM32_PINMUX('D', 8, AF8)>; /* UART4_RX */ + bias-pull-up; + }; + }; + + /omit-if-no-ref/ + uart4_sleep_pins_b: uart4-sleep-1 { + pins { + pinmux = <STM32_PINMUX('A', 9, ANALOG)>, /* UART4_TX */ + <STM32_PINMUX('D', 8, ANALOG)>; /* UART4_RX */ + }; + }; + + /omit-if-no-ref/ + uart7_pins_a: uart7-0 { + pins1 { + pinmux = <STM32_PINMUX('H', 2, AF8)>, /* UART7_TX */ + <STM32_PINMUX('B', 12, AF7)>; /* UART7_RTS */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('E', 10, AF7)>, /* UART7_RX */ + <STM32_PINMUX('G', 7, AF8)>; /* UART7_CTS_NSS */ + bias-disable; + }; + }; + + /omit-if-no-ref/ + uart7_idle_pins_a: uart7-idle-0 { + pins1 { + pinmux = <STM32_PINMUX('H', 2, ANALOG)>, /* UART7_TX */ + <STM32_PINMUX('G', 7, ANALOG)>; /* UART7_CTS_NSS */ + }; + pins2 { + pinmux = <STM32_PINMUX('B', 12, AF7)>; /* UART7_RTS */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins3 { + pinmux = <STM32_PINMUX('E', 10, AF7)>; /* UART7_RX */ + bias-disable; + }; + }; + + /omit-if-no-ref/ + uart7_sleep_pins_a: uart7-sleep-0 { + pins { + pinmux = <STM32_PINMUX('H', 2, ANALOG)>, /* UART7_TX */ + <STM32_PINMUX('B', 12, ANALOG)>, /* UART7_RTS */ + <STM32_PINMUX('E', 10, ANALOG)>, /* UART7_RX */ + <STM32_PINMUX('G', 7, ANALOG)>; /* UART7_CTS_NSS */ + }; + }; + + /omit-if-no-ref/ uart8_pins_a: uart8-0 { pins1 { pinmux = <STM32_PINMUX('E', 1, AF8)>; /* UART8_TX */ @@ -346,6 +958,7 @@ }; }; + /omit-if-no-ref/ uart8_idle_pins_a: uart8-idle-0 { pins1 { pinmux = <STM32_PINMUX('E', 1, ANALOG)>; /* UART8_TX */ @@ -356,6 +969,7 @@ }; }; + /omit-if-no-ref/ uart8_sleep_pins_a: uart8-sleep-0 { pins { pinmux = <STM32_PINMUX('E', 1, ANALOG)>, /* UART8_TX */ @@ -363,6 +977,7 @@ }; }; + /omit-if-no-ref/ usart1_pins_a: usart1-0 { pins1 { pinmux = <STM32_PINMUX('C', 0, AF7)>, /* USART1_TX */ @@ -378,6 +993,7 @@ }; }; + /omit-if-no-ref/ usart1_idle_pins_a: usart1-idle-0 { pins1 { pinmux = <STM32_PINMUX('C', 0, ANALOG)>, /* USART1_TX */ @@ -395,6 +1011,7 @@ }; }; + /omit-if-no-ref/ usart1_sleep_pins_a: usart1-sleep-0 { pins { pinmux = <STM32_PINMUX('C', 0, ANALOG)>, /* USART1_TX */ @@ -404,6 +1021,40 @@ }; }; + /omit-if-no-ref/ + usart1_pins_b: usart1-1 { + pins1 { + pinmux = <STM32_PINMUX('C', 0, AF7)>; /* USART1_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('D', 14, AF7)>; /* USART1_RX */ + bias-pull-up; + }; + }; + + /omit-if-no-ref/ + usart1_idle_pins_b: usart1-idle-1 { + pins1 { + pinmux = <STM32_PINMUX('C', 0, ANALOG)>; /* USART1_TX */ + }; + pins2 { + pinmux = <STM32_PINMUX('D', 14, AF7)>; /* USART1_RX */ + bias-pull-up; + }; + }; + + /omit-if-no-ref/ + usart1_sleep_pins_b: usart1-sleep-1 { + pins { + pinmux = <STM32_PINMUX('C', 0, ANALOG)>, /* USART1_TX */ + <STM32_PINMUX('D', 14, ANALOG)>; /* USART1_RX */ + }; + }; + + /omit-if-no-ref/ usart2_pins_a: usart2-0 { pins1 { pinmux = <STM32_PINMUX('H', 12, AF1)>, /* USART2_TX */ @@ -419,6 +1070,7 @@ }; }; + /omit-if-no-ref/ usart2_idle_pins_a: usart2-idle-0 { pins1 { pinmux = <STM32_PINMUX('H', 12, ANALOG)>, /* USART2_TX */ @@ -436,6 +1088,7 @@ }; }; + /omit-if-no-ref/ usart2_sleep_pins_a: usart2-sleep-0 { pins { pinmux = <STM32_PINMUX('H', 12, ANALOG)>, /* USART2_TX */ @@ -444,4 +1097,48 @@ <STM32_PINMUX('E', 11, ANALOG)>; /* USART2_CTS_NSS */ }; }; + + /omit-if-no-ref/ + usart2_pins_b: usart2-1 { + pins1 { + pinmux = <STM32_PINMUX('F', 11, AF1)>, /* USART2_TX */ + <STM32_PINMUX('A', 1, AF7)>; /* USART2_RTS */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = <STM32_PINMUX('D', 15, AF1)>, /* USART2_RX */ + <STM32_PINMUX('E', 15, AF3)>; /* USART2_CTS_NSS */ + bias-disable; + }; + }; + + /omit-if-no-ref/ + usart2_idle_pins_b: usart2-idle-1 { + pins1 { + pinmux = <STM32_PINMUX('F', 11, ANALOG)>, /* USART2_TX */ + <STM32_PINMUX('E', 15, ANALOG)>; /* USART2_CTS_NSS */ + }; + pins2 { + pinmux = <STM32_PINMUX('A', 1, AF7)>; /* USART2_RTS */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins3 { + pinmux = <STM32_PINMUX('D', 15, AF1)>; /* USART2_RX */ + bias-disable; + }; + }; + + /omit-if-no-ref/ + usart2_sleep_pins_b: usart2-sleep-1 { + pins { + pinmux = <STM32_PINMUX('F', 11, ANALOG)>, /* USART2_TX */ + <STM32_PINMUX('A', 1, ANALOG)>, /* USART2_RTS */ + <STM32_PINMUX('D', 15, ANALOG)>, /* USART2_RX */ + <STM32_PINMUX('E', 15, ANALOG)>; /* USART2_CTS_NSS */ + }; + }; }; diff --git a/arch/arm/boot/dts/st/stm32mp131.dtsi b/arch/arm/boot/dts/st/stm32mp131.dtsi index 6704ceef284d..e1a764d269d2 100644 --- a/arch/arm/boot/dts/st/stm32mp131.dtsi +++ b/arch/arm/boot/dts/st/stm32mp131.dtsi @@ -979,6 +979,12 @@ ts_cal2: calib@5e { reg = <0x5e 0x2>; }; + ethernet_mac1_address: mac1@e4 { + reg = <0xe4 0x6>; + }; + ethernet_mac2_address: mac2@ea { + reg = <0xea 0x6>; + }; }; etzpc: bus@5c007000 { @@ -1505,6 +1511,38 @@ status = "disabled"; }; + ethernet1: ethernet@5800a000 { + compatible = "st,stm32mp13-dwmac", "snps,dwmac-4.20a"; + reg = <0x5800a000 0x2000>; + reg-names = "stmmaceth"; + interrupts-extended = <&intc GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>, + <&exti 68 1>; + interrupt-names = "macirq", "eth_wake_irq"; + clock-names = "stmmaceth", + "mac-clk-tx", + "mac-clk-rx", + "ethstp", + "eth-ck"; + clocks = <&rcc ETH1MAC>, + <&rcc ETH1TX>, + <&rcc ETH1RX>, + <&rcc ETH1STP>, + <&rcc ETH1CK_K>; + st,syscon = <&syscfg 0x4 0xff0000>; + snps,mixed-burst; + snps,pbl = <2>; + snps,axi-config = <&stmmac_axi_config_1>; + snps,tso; + access-controllers = <&etzpc 48>; + status = "disabled"; + + stmmac_axi_config_1: stmmac-axi-config { + snps,blen = <0 0 0 0 16 8 4>; + snps,rd_osr_lmt = <0x7>; + snps,wr_osr_lmt = <0x7>; + }; + }; + usbphyc: usbphyc@5a006000 { #address-cells = <1>; #size-cells = <0>; diff --git a/arch/arm/boot/dts/st/stm32mp133.dtsi b/arch/arm/boot/dts/st/stm32mp133.dtsi index 3e394c8e58b9..73e470019ce4 100644 --- a/arch/arm/boot/dts/st/stm32mp133.dtsi +++ b/arch/arm/boot/dts/st/stm32mp133.dtsi @@ -68,4 +68,35 @@ }; }; }; + + ethernet2: ethernet@5800e000 { + compatible = "st,stm32mp13-dwmac", "snps,dwmac-4.20a"; + reg = <0x5800e000 0x2000>; + reg-names = "stmmaceth"; + interrupts-extended = <&intc GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + clock-names = "stmmaceth", + "mac-clk-tx", + "mac-clk-rx", + "ethstp", + "eth-ck"; + clocks = <&rcc ETH2MAC>, + <&rcc ETH2TX>, + <&rcc ETH2RX>, + <&rcc ETH2STP>, + <&rcc ETH2CK_K>; + st,syscon = <&syscfg 0x4 0xff000000>; + snps,mixed-burst; + snps,pbl = <2>; + snps,axi-config = <&stmmac_axi_config_2>; + snps,tso; + access-controllers = <&etzpc 49>; + status = "disabled"; + + stmmac_axi_config_2: stmmac-axi-config { + snps,blen = <0 0 0 0 16 8 4>; + snps,rd_osr_lmt = <0x7>; + snps,wr_osr_lmt = <0x7>; + }; + }; }; diff --git a/arch/arm/boot/dts/st/stm32mp135f-dhcor-dhsbc.dts b/arch/arm/boot/dts/st/stm32mp135f-dhcor-dhsbc.dts new file mode 100644 index 000000000000..bacb70b4256b --- /dev/null +++ b/arch/arm/boot/dts/st/stm32mp135f-dhcor-dhsbc.dts @@ -0,0 +1,377 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) 2024 Marek Vasut <marex@denx.de> + * + * DHCOR STM32MP13 variant: + * DHCR-STM32MP135F-C100-R051-EE-F0409-SPI4-RTC-WBT-I-01LG + * DHCOR PCB number: 718-100 or newer + * DHSBC PCB number: 719-100 or newer + */ + +/dts-v1/; + +#include <dt-bindings/regulator/st,stm32mp13-regulator.h> +#include "stm32mp135.dtsi" +#include "stm32mp13xf.dtsi" +#include "stm32mp13xx-dhcor-som.dtsi" + +/ { + model = "DH electronics STM32MP135F DHCOR DHSBC"; + compatible = "dh,stm32mp135f-dhcor-dhsbc", + "dh,stm32mp135f-dhcor-som", + "st,stm32mp135"; + + aliases { + ethernet0 = ðernet1; + ethernet1 = ðernet2; + serial2 = &usart1; + serial3 = &usart2; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; +}; + +&adc_1 { + pinctrl-names = "default"; + pinctrl-0 = <&adc1_pins_a &adc1_usb_cc_pins_b>; + vdda-supply = <&vdd_adc>; + vref-supply = <&vdd_adc>; + status = "okay"; + + adc1: adc@0 { + status = "okay"; + + /* + * Type-C USB_PWR_CC1 & USB_PWR_CC2 on in2 & in11. + * Use at least 5 * RC time, e.g. 5 * (Rp + Rd) * C: + * 5 * (5.1 + 47kOhms) * 5pF => 1.3us. + * Use arbitrary margin here (e.g. 5us). + * + * The pinmux pins must be set as ANALOG, use datasheet + * DS13483 Table 7. STM32MP135C/F ball definitions to + * find out which 'pin name' maps to which 'additional + * functions', which lists the mapping between pin and + * ADC channel. In this case, PA5 maps to ADC1_INP2 and + * PF13 maps to ADC1_INP11 . + */ + channel@2 { + reg = <2>; + st,min-sample-time-ns = <5000>; + }; + + channel@11 { + reg = <11>; + st,min-sample-time-ns = <5000>; + }; + + /* Expansion connector: INP12:pin29 */ + channel@12 { + reg = <12>; + st,min-sample-time-ns = <5000>; + }; + }; +}; + +ðernet1 { + phy-handle = <ðphy1>; + phy-mode = "rgmii-id"; + pinctrl-0 = <ð1_rgmii_pins_a>; + pinctrl-1 = <ð1_rgmii_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + st,ext-phyclk; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + + ethphy1: ethernet-phy@1 { + /* RTL8211F */ + compatible = "ethernet-phy-id001c.c916"; + interrupt-parent = <&gpiog>; + interrupts = <12 IRQ_TYPE_LEVEL_LOW>; + reg = <1>; + reset-assert-us = <15000>; + reset-deassert-us = <55000>; + reset-gpios = <&gpioa 11 GPIO_ACTIVE_LOW>; + }; + }; +}; + +ðernet2 { + phy-handle = <ðphy2>; + phy-mode = "rgmii-id"; + pinctrl-0 = <ð2_rgmii_pins_a>; + pinctrl-1 = <ð2_rgmii_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + st,ext-phyclk; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + + ethphy2: ethernet-phy@1 { + /* RTL8211F */ + compatible = "ethernet-phy-id001c.c916"; + interrupt-parent = <&gpiog>; + interrupts = <15 IRQ_TYPE_LEVEL_LOW>; + reg = <1>; + reset-assert-us = <15000>; + reset-deassert-us = <55000>; + reset-gpios = <&gpiog 8 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&gpioa { + gpio-line-names = "", "", "", "", + "", "DHSBC_USB_PWR_CC1", "", "", + "", "", "", "DHSBC_nETH1_RST", + "", "DHCOR_HW-CODING_0", "", ""; +}; + +&gpiob { + gpio-line-names = "", "", "", "", + "", "", "", "DHCOR_BT_HOST_WAKE", + "", "", "", "", + "", "DHSBC_nTPM_CS", "", ""; +}; + +&gpioc { + gpio-line-names = "", "", "", "DHSBC_USB_5V_MEAS", + "", "", "", "", + "", "", "", "", + "", "", "", ""; +}; + +&gpiod { + gpio-line-names = "", "", "", "", + "", "DHCOR_RAM-CODING_0", "", "", + "", "DHCOR_RAM-CODING_1", "", "", + "", "", "", ""; +}; + +&gpioe { + gpio-line-names = "", "", "", "", + "", "", "", "", + "", "DHSBC_nTPM_RST", "", "", + "DHSBC_nTPM_PIRQ", "", "DHCOR_WL_HOST_WAKE", ""; +}; + +&gpiof { + gpio-line-names = "", "", "DHSBC_USB_PWR_nFLT", "", + "", "", "", "", + "", "", "", "", + "DHCOR_WL_REG_ON", "DHSBC_USB_PWR_CC2", "", ""; +}; + +&gpiog { + gpio-line-names = "", "", "", "", + "", "", "", "", + "DHSBC_nETH2_RST", "DHCOR_BT_DEV_WAKE", "", "", + "DHSBC_ETH1_INTB", "", "", "DHSBC_ETH2_INTB"; +}; + +&gpioi { + gpio-line-names = "DHCOR_RTC_nINT", "DHCOR_HW-CODING_1", + "DHCOR_BT_REG_ON", "DHCOR_PMIC_nINT", + "DHSBC_BOOT0", "DHSBC_BOOT1", + "DHSBC_BOOT2", "DHSBC_USB-C_DATA_VBUS"; +}; + +&i2c1 { /* Expansion connector: SDA:pin27 SCL:pin28 */ + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c1_pins_a>; + pinctrl-1 = <&i2c1_sleep_pins_a>; + i2c-scl-rising-time-ns = <96>; + i2c-scl-falling-time-ns = <3>; + clock-frequency = <400000>; + status = "okay"; + /* spare dmas for other usage */ + /delete-property/dmas; + /delete-property/dma-names; +}; + +&i2c5 { /* Expansion connector: SDA:pin3 SCL:pin5 */ + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c5_pins_b>; + pinctrl-1 = <&i2c5_sleep_pins_b>; + i2c-scl-rising-time-ns = <96>; + i2c-scl-falling-time-ns = <3>; + clock-frequency = <400000>; + status = "okay"; + /* spare dmas for other usage */ + /delete-property/dmas; + /delete-property/dma-names; +}; + +&m_can1 { /* Expansion connector: TX:pin16 RX:pin18 */ + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&m_can1_pins_a>; + pinctrl-1 = <&m_can1_sleep_pins_a>; + status = "okay"; +}; + +&m_can2 { /* Expansion connector: TX:pin22 RX:pin26 */ + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&m_can2_pins_a>; + pinctrl-1 = <&m_can2_sleep_pins_a>; + status = "okay"; +}; + +&pwr_regulators { + vdd-supply = <&vdd>; + vdd_3v3_usbfs-supply = <&vdd_usb>; + status = "okay"; +}; + +&sai1 { /* Expansion connector: SCK-A:pin12 FS-A:pin35 SD-A:pin38 SD-B:pin40 */ + clocks = <&rcc SAI1>, <&rcc PLL3_Q>, <&rcc PLL3_R>; + clock-names = "pclk", "x8k", "x11k"; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sai1a_pins_a &sai1b_pins_a>; + pinctrl-1 = <&sai1a_sleep_pins_a &sai1b_sleep_pins_a>; +}; + +&scmi_voltd { + status = "disabled"; +}; + +&spi2 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&spi2_pins_a>; + pinctrl-1 = <&spi2_sleep_pins_a>; + cs-gpios = <&gpiob 13 0>; + status = "okay"; + + st33htph: tpm@0 { + compatible = "st,st33htpm-spi", "tcg,tpm_tis-spi"; + reg = <0>; + spi-max-frequency = <24000000>; + }; +}; + +&spi3 { /* Expansion connector: MOSI:pin19 MISO:pin21 SCK:pin22 nCS:pin24 */ + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&spi3_pins_a>; + pinctrl-1 = <&spi3_sleep_pins_a>; + cs-gpios = <&gpiof 3 0>; + status = "disabled"; +}; + +&timers5 { /* Expansion connector: CH3:pin31 */ + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; + + pwm { + pinctrl-0 = <&pwm5_pins_a>; + pinctrl-1 = <&pwm5_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; + timer@4 { + status = "okay"; + }; +}; + +&timers13 { /* Expansion connector: CH1:pin32 */ + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; + + pwm { + pinctrl-0 = <&pwm13_pins_a>; + pinctrl-1 = <&pwm13_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; + timer@12 { + status = "okay"; + }; +}; + +&usart1 { /* Expansion connector: RX:pin33 TX:pin37 */ + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&usart1_pins_b>; + pinctrl-1 = <&usart1_sleep_pins_b>; + pinctrl-2 = <&usart1_idle_pins_b>; + status = "okay"; +}; + +&usart2 { /* Expansion connector: RX:pin10 TX:pin8 RTS:pin11 CTS:pin36 */ + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&usart2_pins_b>; + pinctrl-1 = <&usart2_sleep_pins_b>; + pinctrl-2 = <&usart2_idle_pins_b>; + uart-has-rtscts; + status = "okay"; +}; + +&usbh_ehci { + phys = <&usbphyc_port0>; + status = "okay"; +}; + +&usbh_ohci { + phys = <&usbphyc_port0>; + status = "okay"; +}; + +&usbotg_hs { + dr_mode = "peripheral"; + phys = <&usbphyc_port1 0>; + phy-names = "usb2-phy"; + usb33d-supply = <&usb33>; + status = "okay"; +}; + +&usbphyc { + status = "okay"; + vdda1v1-supply = <®11>; + vdda1v8-supply = <®18>; +}; + +&usbphyc_port0 { + phy-supply = <&vdd_usb>; + st,current-boost-microamp = <1000>; + st,decrease-hs-slew-rate; + st,tune-hs-dc-level = <2>; + st,enable-hs-rftime-reduction; + st,trim-hs-current = <11>; + st,trim-hs-impedance = <2>; + st,tune-squelch-level = <1>; + st,enable-hs-rx-gain-eq; + st,no-hs-ftime-ctrl; + st,no-lsfs-sc; + connector { + compatible = "usb-a-connector"; + vbus-supply = <&vbus_sw>; + }; +}; + +&usbphyc_port1 { + phy-supply = <&vdd_usb>; + st,current-boost-microamp = <1000>; + st,decrease-hs-slew-rate; + st,tune-hs-dc-level = <2>; + st,enable-hs-rftime-reduction; + st,trim-hs-current = <11>; + st,trim-hs-impedance = <2>; + st,tune-squelch-level = <1>; + st,enable-hs-rx-gain-eq; + st,no-hs-ftime-ctrl; + st,no-lsfs-sc; + connector { + compatible = "gpio-usb-b-connector", "usb-b-connector"; + vbus-gpios = <&gpioi 7 GPIO_ACTIVE_HIGH>; + label = "Type-C"; + self-powered; + type = "micro"; + }; +}; diff --git a/arch/arm/boot/dts/st/stm32mp135f-dk.dts b/arch/arm/boot/dts/st/stm32mp135f-dk.dts index 567e53ad285f..1af335a39993 100644 --- a/arch/arm/boot/dts/st/stm32mp135f-dk.dts +++ b/arch/arm/boot/dts/st/stm32mp135f-dk.dts @@ -19,6 +19,7 @@ compatible = "st,stm32mp135f-dk", "st,stm32mp135"; aliases { + ethernet0 = ðernet1; serial0 = &uart4; serial1 = &usart1; serial2 = &uart8; @@ -29,6 +30,20 @@ stdout-path = "serial0:115200n8"; }; + clocks { + clk_ext_camera: clk-ext-camera { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + }; + + clk_mco1: clk-mco1 { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <24000000>; + }; + }; + memory@c0000000 { device_type = "memory"; reg = <0xc0000000 0x20000000>; @@ -141,6 +156,45 @@ status = "okay"; }; +&dcmipp { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&dcmipp_pins_a>; + pinctrl-1 = <&dcmipp_sleep_pins_a>; + status = "okay"; + + port { + dcmipp_0: endpoint { + remote-endpoint = <&mipid02_2>; + bus-width = <8>; + hsync-active = <0>; + vsync-active = <0>; + pclk-sample = <0>; + }; + }; +}; + +ðernet1 { + status = "okay"; + pinctrl-0 = <ð1_rmii_pins_a>; + pinctrl-1 = <ð1_rmii_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + phy-mode = "rmii"; + phy-handle = <&phy0_eth1>; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + + phy0_eth1: ethernet-phy@0 { + compatible = "ethernet-phy-id0007.c131"; + reg = <0>; + reset-gpios = <&mcp23017 9 GPIO_ACTIVE_LOW>; + wakeup-source; + }; + }; +}; + &i2c1 { pinctrl-names = "default", "sleep"; pinctrl-0 = <&i2c1_pins_a>; @@ -201,6 +255,76 @@ /* spare dmas for other usage */ /delete-property/dmas; /delete-property/dma-names; + + stmipi: csi2rx@14 { + compatible = "st,st-mipid02"; + reg = <0x14>; + clocks = <&clk_mco1>; + clock-names = "xclk"; + VDDE-supply = <&scmi_v1v8_periph>; + VDDIN-supply = <&scmi_v1v8_periph>; + reset-gpios = <&mcp23017 2 (GPIO_ACTIVE_LOW | GPIO_PUSH_PULL)>; + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + port@0 { + reg = <0>; + + mipid02_0: endpoint { + data-lanes = <1 2>; + lane-polarities = <0 0 0>; + remote-endpoint = <&gc2145_ep>; + }; + }; + port@2 { + reg = <2>; + + mipid02_2: endpoint { + bus-width = <8>; + hsync-active = <0>; + vsync-active = <0>; + pclk-sample = <0>; + remote-endpoint = <&dcmipp_0>; + }; + }; + }; + }; + + gc2145: camera@3c { + compatible = "galaxycore,gc2145"; + reg = <0x3c>; + clocks = <&clk_ext_camera>; + iovdd-supply = <&scmi_v3v3_sw>; + avdd-supply = <&scmi_v3v3_sw>; + dvdd-supply = <&scmi_v3v3_sw>; + powerdown-gpios = <&mcp23017 3 (GPIO_ACTIVE_LOW | GPIO_PUSH_PULL)>; + reset-gpios = <&mcp23017 4 (GPIO_ACTIVE_LOW | GPIO_PUSH_PULL)>; + status = "okay"; + + port { + gc2145_ep: endpoint { + remote-endpoint = <&mipid02_0>; + data-lanes = <1 2>; + link-frequencies = /bits/ 64 <120000000 192000000 240000000>; + }; + }; + }; + + goodix: goodix-ts@5d { + compatible = "goodix,gt911"; + reg = <0x5d>; + pinctrl-names = "default"; + pinctrl-0 = <&goodix_pins_a>; + interrupt-parent = <&gpiof>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + AVDD28-supply = <&scmi_v3v3_sw>; + VDDIO-supply = <&scmi_v3v3_sw>; + touchscreen-size-x = <480>; + touchscreen-size-y = <272>; + status = "okay" ; + }; }; &iwdg2 { @@ -273,6 +397,7 @@ /delete-property/dma-names; status = "disabled"; pwm { + /* PWM output on pin 7 of the expansion connector (CN8.7) using TIM3_CH4 func */ pinctrl-0 = <&pwm3_pins_a>; pinctrl-1 = <&pwm3_sleep_pins_a>; pinctrl-names = "default", "sleep"; @@ -288,6 +413,7 @@ /delete-property/dma-names; status = "disabled"; pwm { + /* PWM output on pin 31 of the expansion connector (CN8.31) using TIM4_CH2 func */ pinctrl-0 = <&pwm4_pins_a>; pinctrl-1 = <&pwm4_sleep_pins_a>; pinctrl-names = "default", "sleep"; @@ -303,6 +429,7 @@ /delete-property/dma-names; status = "disabled"; pwm { + /* PWM output on pin 32 of the expansion connector (CN8.32) using TIM8_CH3 func */ pinctrl-0 = <&pwm8_pins_a>; pinctrl-1 = <&pwm8_sleep_pins_a>; pinctrl-names = "default", "sleep"; @@ -316,6 +443,7 @@ &timers14 { status = "disabled"; pwm { + /* PWM output on pin 33 of the expansion connector (CN8.33) using TIM14_CH1 func */ pinctrl-0 = <&pwm14_pins_a>; pinctrl-1 = <&pwm14_sleep_pins_a>; pinctrl-names = "default", "sleep"; diff --git a/arch/arm/boot/dts/st/stm32mp13xx-dhcor-som.dtsi b/arch/arm/boot/dts/st/stm32mp13xx-dhcor-som.dtsi new file mode 100644 index 000000000000..ddad6497775b --- /dev/null +++ b/arch/arm/boot/dts/st/stm32mp13xx-dhcor-som.dtsi @@ -0,0 +1,308 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (C) 2024 Marek Vasut <marex@denx.de> + */ + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include <dt-bindings/mfd/st,stpmic1.h> +#include <dt-bindings/regulator/st,stm32mp13-regulator.h> +#include "stm32mp13-pinctrl.dtsi" + +/ { + model = "DH electronics STM32MP13xx DHCOR SoM"; + compatible = "dh,stm32mp131a-dhcor-som", + "st,stm32mp131"; + + aliases { + mmc0 = &sdmmc2; + mmc1 = &sdmmc1; + serial0 = &uart4; + serial1 = &uart7; + rtc0 = &rv3032; + spi0 = &qspi; + }; + + memory@c0000000 { + device_type = "memory"; + reg = <0xc0000000 0x20000000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + optee@dd000000 { + reg = <0xdd000000 0x3000000>; + no-map; + }; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpiof 12 GPIO_ACTIVE_LOW>; + }; + + vin: vin { + compatible = "regulator-fixed"; + regulator-name = "vin"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; +}; + +&i2c3 { + i2c-scl-rising-time-ns = <96>; + i2c-scl-falling-time-ns = <3>; + clock-frequency = <400000>; + status = "okay"; + /* spare dmas for other usage */ + /delete-property/dmas; + /delete-property/dma-names; + + pmic: stpmic@33 { + compatible = "st,stpmic1"; + reg = <0x33>; + interrupts-extended = <&gpioi 3 IRQ_TYPE_EDGE_FALLING>; + interrupt-controller; + #interrupt-cells = <2>; + status = "okay"; + + regulators { + compatible = "st,stpmic1-regulators"; + + ldo1-supply = <&vin>; + ldo2-supply = <&vin>; + ldo3-supply = <&vin>; + ldo4-supply = <&vin>; + ldo5-supply = <&vin>; + ldo6-supply = <&vin>; + pwr_sw1-supply = <&bst_out>; + pwr_sw2-supply = <&bst_out>; + + vddcpu: buck1 { /* VDD_CPU_1V2 */ + regulator-name = "vddcpu"; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + vdd_ddr: buck2 { /* VDD_DDR_1V35 */ + regulator-name = "vdd_ddr"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + vdd: buck3 { /* VDD_3V3_1V8 */ + regulator-name = "vdd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + vddcore: buck4 { /* VDD_CORE_1V2 */ + regulator-name = "vddcore"; + regulator-min-microvolt = <1250000>; + regulator-max-microvolt = <1250000>; + regulator-always-on; + regulator-initial-mode = <0>; + regulator-over-current-protection; + }; + + vdd_adc: ldo1 { /* VDD_ADC_1V8 */ + regulator-name = "vdd_adc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + interrupts = <IT_CURLIM_LDO1 0>; + }; + + vdd_ldo2: ldo2 { /* LDO2_OUT_1V8 */ + regulator-name = "vdd_ldo2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + interrupts = <IT_CURLIM_LDO2 0>; + }; + + vdd_ldo3: ldo3 { /* LDO3_OUT */ + regulator-name = "vdd_ldo3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + interrupts = <IT_CURLIM_LDO3 0>; + }; + + vdd_usb: ldo4 { /* VDD_USB_3V3 */ + regulator-name = "vdd_usb"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + interrupts = <IT_CURLIM_LDO4 0>; + }; + + vdd_sd: ldo5 { /* VDD_SD_3V3_1V8 */ + regulator-name = "vdd_sd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + interrupts = <IT_CURLIM_LDO5 0>; + }; + + vdd_sd2: ldo6 { /* VDD_SD2_3V3_1V8 */ + regulator-name = "vdd_sd2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + interrupts = <IT_CURLIM_LDO6 0>; + }; + + vref_ddr: vref_ddr { /* VREF_DDR_0V675 */ + regulator-name = "vref_ddr"; + regulator-always-on; + }; + + bst_out: boost { /* BST_OUT_5V2 */ + regulator-name = "bst_out"; + }; + + vbus_otg: pwr_sw1 { + regulator-name = "vbus_otg"; + interrupts = <IT_OCP_OTG 0>; + }; + + vbus_sw: pwr_sw2 { + regulator-name = "vbus_sw"; + interrupts = <IT_OCP_SWOUT 0>; + regulator-active-discharge = <1>; + }; + }; + + onkey { + compatible = "st,stpmic1-onkey"; + interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 1>; + interrupt-names = "onkey-falling", "onkey-rising"; + status = "okay"; + }; + + watchdog { + compatible = "st,stpmic1-wdt"; + status = "disabled"; + }; + }; + + eeprom0: eeprom@50 { + compatible = "atmel,24c256"; /* ST M24256 */ + reg = <0x50>; + pagesize = <64>; + }; + + rv3032: rtc@51 { + compatible = "microcrystal,rv3032"; + reg = <0x51>; + interrupts-extended = <&gpioi 0 IRQ_TYPE_EDGE_FALLING>; + }; +}; + +&iwdg2 { + timeout-sec = <32>; + status = "okay"; +}; + +&qspi { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&qspi_clk_pins_a + &qspi_bk1_pins_a + &qspi_cs1_pins_a>; + pinctrl-1 = <&qspi_clk_sleep_pins_a + &qspi_bk1_sleep_pins_a + &qspi_cs1_sleep_pins_a>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + flash0: flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-rx-bus-width = <4>; + spi-max-frequency = <108000000>; + #address-cells = <1>; + #size-cells = <1>; + }; +}; + +/* Console UART */ +&uart4 { + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&uart4_pins_b>; + pinctrl-1 = <&uart4_sleep_pins_b>; + pinctrl-2 = <&uart4_idle_pins_b>; + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; +}; + +/* Bluetooth */ +&uart7 { + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&uart7_pins_a>; + pinctrl-1 = <&uart7_sleep_pins_a>; + pinctrl-2 = <&uart7_idle_pins_a>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "infineon,cyw43439-bt", "brcm,bcm4329-bt"; + max-speed = <3000000>; + device-wakeup-gpios = <&gpiog 9 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpioi 2 GPIO_ACTIVE_HIGH>; + }; +}; + +/* SDIO WiFi */ +&sdmmc1 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_clk_pins_a>; + pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_clk_pins_a>; + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; + bus-width = <4>; + cap-power-off-card; + keep-power-in-suspend; + non-removable; + st,neg-edge; + vmmc-supply = <&vdd>; + mmc-pwrseq = <&sdio_pwrseq>; + status = "okay"; + + #address-cells = <1>; + #size-cells = <0>; + + brcmf: bcrmf@1 { /* muRata 1YN */ + reg = <1>; + compatible = "infineon,cyw43439-fmac", "brcm,bcm4329-fmac"; + interrupt-parent = <&gpioe>; + interrupts = <14 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "host-wake"; + }; +}; + +/* eMMC */ +&sdmmc2 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a &sdmmc2_clk_pins_a>; + pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_a &sdmmc2_clk_pins_a>; + pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_a>; + bus-width = <8>; + mmc-ddr-3_3v; + no-sd; + no-sdio; + non-removable; + st,neg-edge; + vmmc-supply = <&vdd>; + vqmmc-supply = <&vdd>; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/st/stm32mp151.dtsi b/arch/arm/boot/dts/st/stm32mp151.dtsi index 90c5c72c87ab..4f878ec102c1 100644 --- a/arch/arm/boot/dts/st/stm32mp151.dtsi +++ b/arch/arm/boot/dts/st/stm32mp151.dtsi @@ -50,6 +50,7 @@ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>, <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>; interrupt-parent = <&intc>; + arm,no-tick-in-suspend; }; clocks { diff --git a/arch/arm/boot/dts/st/stm32mp157a-dk1-scmi.dts b/arch/arm/boot/dts/st/stm32mp157a-dk1-scmi.dts index 306e1bc2a514..847b360f02fc 100644 --- a/arch/arm/boot/dts/st/stm32mp157a-dk1-scmi.dts +++ b/arch/arm/boot/dts/st/stm32mp157a-dk1-scmi.dts @@ -62,6 +62,11 @@ reset-names = "mcu_rst", "hold_boot"; }; +&optee { + interrupt-parent = <&intc>; + interrupts = <GIC_PPI 15 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; +}; + &rcc { compatible = "st,stm32mp1-rcc-secure", "syscon"; clock-names = "hse", "hsi", "csi", "lse", "lsi"; diff --git a/arch/arm/boot/dts/st/stm32mp157c-dk2-scmi.dts b/arch/arm/boot/dts/st/stm32mp157c-dk2-scmi.dts index 956da5f26c1c..43280289759d 100644 --- a/arch/arm/boot/dts/st/stm32mp157c-dk2-scmi.dts +++ b/arch/arm/boot/dts/st/stm32mp157c-dk2-scmi.dts @@ -68,6 +68,11 @@ reset-names = "mcu_rst", "hold_boot"; }; +&optee { + interrupt-parent = <&intc>; + interrupts = <GIC_PPI 15 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; +}; + &rcc { compatible = "st,stm32mp1-rcc-secure", "syscon"; clock-names = "hse", "hsi", "csi", "lse", "lsi"; diff --git a/arch/arm/boot/dts/st/stm32mp157c-ed1-scmi.dts b/arch/arm/boot/dts/st/stm32mp157c-ed1-scmi.dts index 8e4b0db198c2..6f27d794d270 100644 --- a/arch/arm/boot/dts/st/stm32mp157c-ed1-scmi.dts +++ b/arch/arm/boot/dts/st/stm32mp157c-ed1-scmi.dts @@ -67,6 +67,11 @@ reset-names = "mcu_rst", "hold_boot"; }; +&optee { + interrupt-parent = <&intc>; + interrupts = <GIC_PPI 15 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; +}; + &rcc { compatible = "st,stm32mp1-rcc-secure", "syscon"; clock-names = "hse", "hsi", "csi", "lse", "lsi"; diff --git a/arch/arm/boot/dts/st/stm32mp157c-ev1-scmi.dts b/arch/arm/boot/dts/st/stm32mp157c-ev1-scmi.dts index 72b9cab2d990..6ae391bffee5 100644 --- a/arch/arm/boot/dts/st/stm32mp157c-ev1-scmi.dts +++ b/arch/arm/boot/dts/st/stm32mp157c-ev1-scmi.dts @@ -72,6 +72,11 @@ reset-names = "mcu_rst", "hold_boot"; }; +&optee { + interrupt-parent = <&intc>; + interrupts = <GIC_PPI 15 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; +}; + &rcc { compatible = "st,stm32mp1-rcc-secure", "syscon"; clock-names = "hse", "hsi", "csi", "lse", "lsi"; diff --git a/arch/arm/boot/dts/st/stm32mp157c-osd32mp1-red.dts b/arch/arm/boot/dts/st/stm32mp157c-osd32mp1-red.dts index 527c33be66cc..36e6055b5665 100644 --- a/arch/arm/boot/dts/st/stm32mp157c-osd32mp1-red.dts +++ b/arch/arm/boot/dts/st/stm32mp157c-osd32mp1-red.dts @@ -147,11 +147,6 @@ status = "okay"; }; -&pwr_regulators { - vdd-supply = <&vdd>; - vdd_3v3_usbfs-supply = <&vdd_usb>; -}; - &rtc { status = "okay"; }; @@ -211,11 +206,3 @@ &usbphyc { status = "okay"; }; - -&usbphyc_port0 { - phy-supply = <&vdd_usb>; -}; - -&usbphyc_port1 { - phy-supply = <&vdd_usb>; -}; diff --git a/arch/arm/boot/dts/st/stm32mp15xc-lxa-tac.dtsi b/arch/arm/boot/dts/st/stm32mp15xc-lxa-tac.dtsi index cfaf8adde319..c87fd96cbd91 100644 --- a/arch/arm/boot/dts/st/stm32mp15xc-lxa-tac.dtsi +++ b/arch/arm/boot/dts/st/stm32mp15xc-lxa-tac.dtsi @@ -379,11 +379,6 @@ baseboard_eeprom: &sip_eeprom { }; }; -&pwr_regulators { - vdd-supply = <&vdd>; - vdd_3v3_usbfs-supply = <&vdd_usb>; -}; - &rtc { status = "okay"; }; @@ -590,14 +585,6 @@ baseboard_eeprom: &sip_eeprom { status = "okay"; }; -&usbphyc_port0 { - phy-supply = <&vdd_usb>; -}; - -&usbphyc_port1 { - phy-supply = <&vdd_usb>; -}; - &vrefbuf { regulator-min-microvolt = <2500000>; regulator-max-microvolt = <2500000>; diff --git a/arch/arm/boot/dts/st/stm32mp15xx-osd32.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-osd32.dtsi index aeb71c41a734..2022a1fa31ca 100644 --- a/arch/arm/boot/dts/st/stm32mp15xx-osd32.dtsi +++ b/arch/arm/boot/dts/st/stm32mp15xx-osd32.dtsi @@ -214,3 +214,16 @@ &rng1 { status = "okay"; }; + +&pwr_regulators { + vdd-supply = <&vdd>; + vdd_3v3_usbfs-supply = <&vdd_usb>; +}; + +&usbphyc_port0 { + phy-supply = <&vdd_usb>; +}; + +&usbphyc_port1 { + phy-supply = <&vdd_usb>; +}; diff --git a/arch/arm/boot/dts/ti/davinci/da850-evm.dts b/arch/arm/boot/dts/ti/davinci/da850-evm.dts index 6c5936278e75..1f5cd35f8b74 100644 --- a/arch/arm/boot/dts/ti/davinci/da850-evm.dts +++ b/arch/arm/boot/dts/ti/davinci/da850-evm.dts @@ -65,7 +65,7 @@ display-timings { native-mode = <&timing0>; - timing0: 480x272 { + timing0: timing-480x272 { clock-frequency = <9000000>; hactive = <480>; vactive = <272>; diff --git a/arch/arm/boot/dts/ti/omap/am335x-guardian.dts b/arch/arm/boot/dts/ti/omap/am335x-guardian.dts index 56e5d954a490..4b070e634b28 100644 --- a/arch/arm/boot/dts/ti/omap/am335x-guardian.dts +++ b/arch/arm/boot/dts/ti/omap/am335x-guardian.dts @@ -74,7 +74,7 @@ pinctrl-1 = <&lcd_pins_sleep>; display-timings { - 320x240 { + timing-320x240 { hactive = <320>; vactive = <240>; hback-porch = <68>; diff --git a/arch/arm/boot/dts/ti/omap/am335x-pdu001.dts b/arch/arm/boot/dts/ti/omap/am335x-pdu001.dts index f38f5bff2b96..17574d0d0525 100644 --- a/arch/arm/boot/dts/ti/omap/am335x-pdu001.dts +++ b/arch/arm/boot/dts/ti/omap/am335x-pdu001.dts @@ -67,7 +67,7 @@ }; display-timings { - 240x320p16 { + timing-240x320p16 { clock-frequency = <6500000>; hactive = <240>; vactive = <320>; diff --git a/arch/arm/boot/dts/ti/omap/am335x-pepper.dts b/arch/arm/boot/dts/ti/omap/am335x-pepper.dts index d5a4a21889d1..e7d561a527fd 100644 --- a/arch/arm/boot/dts/ti/omap/am335x-pepper.dts +++ b/arch/arm/boot/dts/ti/omap/am335x-pepper.dts @@ -202,7 +202,7 @@ }; display-timings { native-mode = <&timing0>; - timing0: 480x272 { + timing0: timing-480x272 { clock-frequency = <18400000>; hactive = <480>; vactive = <272>; diff --git a/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts b/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts index eb1ec85aba28..e6a18954e449 100644 --- a/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts +++ b/arch/arm/boot/dts/ti/omap/am5729-beagleboneai.dts @@ -196,7 +196,6 @@ extcon_usb1: extcon_usb1 { compatible = "linux,extcon-usb-gpio"; - ti,enable-id-detection; id-gpios = <&gpio3 13 GPIO_ACTIVE_HIGH>; }; }; diff --git a/arch/arm/boot/dts/vt8500/vt8500-bv07.dts b/arch/arm/boot/dts/vt8500/vt8500-bv07.dts index e9f55bd30bd4..38a2da5e2c5d 100644 --- a/arch/arm/boot/dts/vt8500/vt8500-bv07.dts +++ b/arch/arm/boot/dts/vt8500/vt8500-bv07.dts @@ -16,7 +16,7 @@ bits-per-pixel = <16>; display-timings { native-mode = <&timing0>; - timing0: 800x480 { + timing0: timing-800x480 { clock-frequency = <0>; /* unused but required */ hactive = <800>; vactive = <480>; diff --git a/arch/arm/boot/dts/vt8500/vt8500.dtsi b/arch/arm/boot/dts/vt8500/vt8500.dtsi index b7e09eff5bb2..f23cb5ee11ae 100644 --- a/arch/arm/boot/dts/vt8500/vt8500.dtsi +++ b/arch/arm/boot/dts/vt8500/vt8500.dtsi @@ -115,7 +115,7 @@ interrupts = <43>; }; - uhci@d8007b00 { + usb@d8007b00 { compatible = "platform-uhci"; reg = <0xd8007b00 0x200>; interrupts = <43>; diff --git a/arch/arm/boot/dts/vt8500/wm8505-ref.dts b/arch/arm/boot/dts/vt8500/wm8505-ref.dts index 2d77c087676e..8ce9e2ef0a81 100644 --- a/arch/arm/boot/dts/vt8500/wm8505-ref.dts +++ b/arch/arm/boot/dts/vt8500/wm8505-ref.dts @@ -16,7 +16,7 @@ bits-per-pixel = <32>; display-timings { native-mode = <&timing0>; - timing0: 800x480 { + timing0: timing-800x480 { clock-frequency = <0>; /* unused but required */ hactive = <800>; vactive = <480>; diff --git a/arch/arm/boot/dts/vt8500/wm8505.dtsi b/arch/arm/boot/dts/vt8500/wm8505.dtsi index 168cd12b07bc..d9e1280372c5 100644 --- a/arch/arm/boot/dts/vt8500/wm8505.dtsi +++ b/arch/arm/boot/dts/vt8500/wm8505.dtsi @@ -213,7 +213,7 @@ interrupts = <1>; }; - uhci@d8007300 { + usb@d8007300 { compatible = "platform-uhci"; reg = <0xd8007300 0x200>; interrupts = <0>; diff --git a/arch/arm/boot/dts/vt8500/wm8650-mid.dts b/arch/arm/boot/dts/vt8500/wm8650-mid.dts index f6a42149a0a0..7977b6c1e8eb 100644 --- a/arch/arm/boot/dts/vt8500/wm8650-mid.dts +++ b/arch/arm/boot/dts/vt8500/wm8650-mid.dts @@ -17,7 +17,7 @@ display-timings { native-mode = <&timing0>; - timing0: 800x480 { + timing0: timing-800x480 { clock-frequency = <0>; /* unused but required */ hactive = <800>; vactive = <480>; diff --git a/arch/arm/boot/dts/vt8500/wm8650.dtsi b/arch/arm/boot/dts/vt8500/wm8650.dtsi index bc057b6f7d16..35d12d77efc0 100644 --- a/arch/arm/boot/dts/vt8500/wm8650.dtsi +++ b/arch/arm/boot/dts/vt8500/wm8650.dtsi @@ -185,7 +185,7 @@ interrupts = <43>; }; - uhci@d8007b00 { + usb@d8007b00 { compatible = "platform-uhci"; reg = <0xd8007b00 0x200>; interrupts = <43>; diff --git a/arch/arm/boot/dts/vt8500/wm8750.dtsi b/arch/arm/boot/dts/vt8500/wm8750.dtsi index 33aeb37491f4..b292f85d4e69 100644 --- a/arch/arm/boot/dts/vt8500/wm8750.dtsi +++ b/arch/arm/boot/dts/vt8500/wm8750.dtsi @@ -257,13 +257,13 @@ interrupts = <26>; }; - uhci@d8007b00 { + usb@d8007b00 { compatible = "platform-uhci"; reg = <0xd8007b00 0x200>; interrupts = <26>; }; - uhci@d8008d00 { + usb@d8008d00 { compatible = "platform-uhci"; reg = <0xd8008d00 0x200>; interrupts = <26>; diff --git a/arch/arm/boot/dts/vt8500/wm8850-w70v2.dts b/arch/arm/boot/dts/vt8500/wm8850-w70v2.dts index c7a6fe0ce48f..5d409323b10c 100644 --- a/arch/arm/boot/dts/vt8500/wm8850-w70v2.dts +++ b/arch/arm/boot/dts/vt8500/wm8850-w70v2.dts @@ -28,7 +28,7 @@ bits-per-pixel = <16>; display-timings { native-mode = <&timing0>; - timing0: 800x480 { + timing0: timing-800x480 { clock-frequency = <0>; /* unused but required */ hactive = <800>; vactive = <480>; diff --git a/arch/arm/boot/dts/vt8500/wm8850.dtsi b/arch/arm/boot/dts/vt8500/wm8850.dtsi index 65c9271050e6..c61717ebb4f1 100644 --- a/arch/arm/boot/dts/vt8500/wm8850.dtsi +++ b/arch/arm/boot/dts/vt8500/wm8850.dtsi @@ -244,13 +244,13 @@ interrupts = <26>; }; - uhci@d8007b00 { + usb@d8007b00 { compatible = "platform-uhci"; reg = <0xd8007b00 0x200>; interrupts = <26>; }; - uhci@d8008d00 { + usb@d8008d00 { compatible = "platform-uhci"; reg = <0xd8008d00 0x200>; interrupts = <26>; |