Merge tag 'imx-soc-3.11' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/soc

From Shawn Guo:

imx soc changes for 3.11:

* New SoCs i.MX6 Sololite and Vybrid VF610 support
* imx5 and imx6 clock fixes and additions
* Update clock driver to use of_clk_init() function
* Refactor restart routine mxc_restart() to get it work for DT boot
  as well
* Clean up mxc specific ulpi access ops
* imx defconfig updates

* tag 'imx-soc-3.11' of git://git.linaro.org/people/shawnguo/linux-2.6: (29 commits)
  ARM: imx_v6_v7_defconfig: Enable Vybrid VF610
  ARM: imx_v6_v7_defconfig: Enable imx-wm8962 by default
  ARM: clk-imx6qdl: Add clko1 configuration for imx6qdl-sabresd
  ARM: imx_v6_v7_defconfig: Enable PWM and backlight options
  ARM: imx: Remove mxc specific ulpi access ops
  ARM: imx: add initial support for VF610
  ARM: imx: add VF610 clock support
  ARM: imx_v6_v7_defconfig: enable parallel display
  ARM: imx: clk: No need to initialize phandle struct
  ARM: imx: irq-common: Include header to avoid sparse warning
  ARM: imx: Enable mx6 solo-lite support
  ARM: imx6: use common of_clk_init() call to initialize clocks
  ARM: imx6q: call of_clk_init() to register fixed rate clocks
  ARM: imx: imx_v6_v7_defconfig: Select CONFIG_DRM_IMX_TVE
  ARM: i.MX6: clk: add different DualLite MLB clock config
  ARM i.MX5: Add S/PDIF clocks
  ARM i.MX53: Add SATA clock
  ARM: imx6q: clk: add the eim_slow clock
  ARM: imx: remove MLB PLL from pllv3
  ARM: imx: disable pll8_mlb in mx6q_clks
  ...

Conflicts:
	arch/arm/Kconfig.debug (simple add/add conflict)

Includes an update to 3.10-rc6

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

1 files changed, 7 insertions, 6 deletions

diff --git a/arch/mips/kernel/idle.c b/arch/mips/kernel/idle.c
index 3b09b888afa9..0c655deeea4a 100644
--- a/arch/mips/kernel/idle.c
+++ b/arch/mips/kernel/idle.c
@@ -93,26 +93,27 @@ static void rm7k_wait_irqoff(void)
 }
 
 /*
- * The Au1xxx wait is available only if using 32khz counter or
- * external timer source, but specifically not CP0 Counter.
- * alchemy/common/time.c may override cpu_wait!
+ * Au1 'wait' is only useful when the 32kHz counter is used as timer,
+ * since coreclock (and the cp0 counter) stops upon executing it. Only an
+ * interrupt can wake it, so they must be enabled before entering idle modes.
  */
 static void au1k_wait(void)
 {
+	unsigned long c0status = read_c0_status() | 1;	/* irqs on */
+
 	__asm__(
 	"	.set	mips3			\n"
 	"	cache	0x14, 0(%0)		\n"
 	"	cache	0x14, 32(%0)		\n"
 	"	sync				\n"
-	"	nop				\n"
+	"	mtc0	%1, $12			\n" /* wr c0status */
 	"	wait				\n"
 	"	nop				\n"
 	"	nop				\n"
 	"	nop				\n"
 	"	nop				\n"
 	"	.set	mips0			\n"
-	: : "r" (au1k_wait));
-	local_irq_enable();
+	: : "r" (au1k_wait), "r" (c0status));
 }
 
 static int __initdata nowait;