Merge tag 'mips_5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux

Pull MIPS updates from Thomas Bogendoerfer:

 - removed support for PNX833x alias NXT_STB22x

 - included Ingenic SoC support into generic MIPS kernels

 - added support for new Ingenic SoCs

 - converted workaround selection to use Kconfig

 - replaced old boot mem functions by memblock_*

 - enabled COP2 usage in kernel for Loongson64 to make use
   of 16byte load/stores possible

 - cleanups and fixes

* tag 'mips_5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (92 commits)
  MIPS: DEC: Restore bootmem reservation for firmware working memory area
  MIPS: dec: fix section mismatch
  bcm963xx_tag.h: fix duplicated word
  mips: ralink: enable zboot support
  MIPS: ingenic: Remove CPU_SUPPORTS_HUGEPAGES
  MIPS: cpu-probe: remove MIPS_CPU_BP_GHIST option bit
  MIPS: cpu-probe: introduce exclusive R3k CPU probe
  MIPS: cpu-probe: move fpu probing/handling into its own file
  MIPS: replace add_memory_region with memblock
  MIPS: Loongson64: Clean up numa.c
  MIPS: Loongson64: Select SMP in Kconfig to avoid build error
  mips: octeon: Add Ubiquiti E200 and E220 boards
  MIPS: SGI-IP28: disable use of ll/sc in kernel
  MIPS: tx49xx: move tx4939_add_memory_regions into only user
  MIPS: pgtable: Remove used PAGE_USERIO define
  MIPS: alchemy: Share prom_init implementation
  MIPS: alchemy: Fix build breakage, if TOUCHSCREEN_WM97XX is disabled
  MIPS: process: include exec.h header in process.c
  MIPS: process: Add prototype for function arch_dup_task_struct
  MIPS: idle: Add prototype for function check_wait
  ...

15 files changed, 612 insertions, 419 deletions

diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile
index 13a26d254829..2a05b923f579 100644
--- a/arch/mips/kernel/Makefile
+++ b/arch/mips/kernel/Makefile
@@ -5,11 +5,17 @@
 
 extra-y		:= head.o vmlinux.lds
 
-obj-y		+= cmpxchg.o cpu-probe.o branch.o elf.o entry.o genex.o idle.o irq.o \
+obj-y		+= branch.o cmpxchg.o elf.o entry.o genex.o idle.o irq.o \
 		   process.o prom.o ptrace.o reset.o setup.o signal.o \
 		   syscall.o time.o topology.o traps.o unaligned.o watch.o \
 		   vdso.o cacheinfo.o
 
+ifdef CONFIG_CPU_R3K_TLB
+obj-y		+= cpu-r3k-probe.o
+else
+obj-y		+= cpu-probe.o
+endif
+
 ifdef CONFIG_FUNCTION_TRACER
 CFLAGS_REMOVE_ftrace.o = -pg
 CFLAGS_REMOVE_early_printk.o = -pg
@@ -42,6 +48,7 @@ sw-$(CONFIG_CPU_TX39XX)		:= r2300_switch.o
 sw-$(CONFIG_CPU_CAVIUM_OCTEON)	:= octeon_switch.o
 obj-y				+= $(sw-y)
 
+obj-$(CONFIG_MIPS_FP_SUPPORT)	+= fpu-probe.o
 obj-$(CONFIG_CPU_R2300_FPU)	+= r2300_fpu.o
 obj-$(CONFIG_CPU_R4K_FPU)	+= r4k_fpu.o
 
diff --git a/arch/mips/kernel/branch.c b/arch/mips/kernel/branch.c
index fb3e203698ea..0216ff24c392 100644
--- a/arch/mips/kernel/branch.c
+++ b/arch/mips/kernel/branch.c
@@ -20,6 +20,8 @@
 #include <asm/ptrace.h>
 #include <linux/uaccess.h>
 
+#include "probes-common.h"
+
 /*
  * Calculate and return exception PC in case of branch delay slot
  * for microMIPS and MIPS16e. It does not clear the ISA mode bit.
diff --git a/arch/mips/kernel/cpu-probe.c b/arch/mips/kernel/cpu-probe.c
index e2955f1f6316..e6853697a056 100644
--- a/arch/mips/kernel/cpu-probe.c
+++ b/arch/mips/kernel/cpu-probe.c
@@ -28,336 +28,14 @@
 #include <asm/spram.h>
 #include <linux/uaccess.h>
 
+#include "fpu-probe.h"
+
 #include <asm/mach-loongson64/cpucfg-emul.h>
 
 /* Hardware capabilities */
 unsigned int elf_hwcap __read_mostly;
 EXPORT_SYMBOL_GPL(elf_hwcap);
 
-#ifdef CONFIG_MIPS_FP_SUPPORT
-
-/*
- * Get the FPU Implementation/Revision.
- */
-static inline unsigned long cpu_get_fpu_id(void)
-{
-	unsigned long tmp, fpu_id;
-
-	tmp = read_c0_status();
-	__enable_fpu(FPU_AS_IS);
-	fpu_id = read_32bit_cp1_register(CP1_REVISION);
-	write_c0_status(tmp);
-	return fpu_id;
-}
-
-/*
- * Check if the CPU has an external FPU.
- */
-static inline int __cpu_has_fpu(void)
-{
-	return (cpu_get_fpu_id() & FPIR_IMP_MASK) != FPIR_IMP_NONE;
-}
-
-/*
- * Determine the FCSR mask for FPU hardware.
- */
-static inline void cpu_set_fpu_fcsr_mask(struct cpuinfo_mips *c)
-{
-	unsigned long sr, mask, fcsr, fcsr0, fcsr1;
-
-	fcsr = c->fpu_csr31;
-	mask = FPU_CSR_ALL_X | FPU_CSR_ALL_E | FPU_CSR_ALL_S | FPU_CSR_RM;
-
-	sr = read_c0_status();
-	__enable_fpu(FPU_AS_IS);
-
-	fcsr0 = fcsr & mask;
-	write_32bit_cp1_register(CP1_STATUS, fcsr0);
-	fcsr0 = read_32bit_cp1_register(CP1_STATUS);
-
-	fcsr1 = fcsr | ~mask;
-	write_32bit_cp1_register(CP1_STATUS, fcsr1);
-	fcsr1 = read_32bit_cp1_register(CP1_STATUS);
-
-	write_32bit_cp1_register(CP1_STATUS, fcsr);
-
-	write_c0_status(sr);
-
-	c->fpu_msk31 = ~(fcsr0 ^ fcsr1) & ~mask;
-}
-
-/*
- * Determine the IEEE 754 NaN encodings and ABS.fmt/NEG.fmt execution modes
- * supported by FPU hardware.
- */
-static void cpu_set_fpu_2008(struct cpuinfo_mips *c)
-{
-	if (c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M64R1 |
-			    MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2 |
-			    MIPS_CPU_ISA_M32R5 | MIPS_CPU_ISA_M64R5 |
-			    MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R6)) {
-		unsigned long sr, fir, fcsr, fcsr0, fcsr1;
-
-		sr = read_c0_status();
-		__enable_fpu(FPU_AS_IS);
-
-		fir = read_32bit_cp1_register(CP1_REVISION);
-		if (fir & MIPS_FPIR_HAS2008) {
-			fcsr = read_32bit_cp1_register(CP1_STATUS);
-
-			/*
-			 * MAC2008 toolchain never landed in real world, so we're only
-			 * testing wether it can be disabled and don't try to enabled
-			 * it.
-			 */
-			fcsr0 = fcsr & ~(FPU_CSR_ABS2008 | FPU_CSR_NAN2008 | FPU_CSR_MAC2008);
-			write_32bit_cp1_register(CP1_STATUS, fcsr0);
-			fcsr0 = read_32bit_cp1_register(CP1_STATUS);
-
-			fcsr1 = fcsr | FPU_CSR_ABS2008 | FPU_CSR_NAN2008;
-			write_32bit_cp1_register(CP1_STATUS, fcsr1);
-			fcsr1 = read_32bit_cp1_register(CP1_STATUS);
-
-			write_32bit_cp1_register(CP1_STATUS, fcsr);
-
-			if (c->isa_level & (MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2)) {
-				/*
-				 * The bit for MAC2008 might be reused by R6 in future,
-				 * so we only test for R2-R5.
-				 */
-				if (fcsr0 & FPU_CSR_MAC2008)
-					c->options |= MIPS_CPU_MAC_2008_ONLY;
-			}
-
-			if (!(fcsr0 & FPU_CSR_NAN2008))
-				c->options |= MIPS_CPU_NAN_LEGACY;
-			if (fcsr1 & FPU_CSR_NAN2008)
-				c->options |= MIPS_CPU_NAN_2008;
-
-			if ((fcsr0 ^ fcsr1) & FPU_CSR_ABS2008)
-				c->fpu_msk31 &= ~FPU_CSR_ABS2008;
-			else
-				c->fpu_csr31 |= fcsr & FPU_CSR_ABS2008;
-
-			if ((fcsr0 ^ fcsr1) & FPU_CSR_NAN2008)
-				c->fpu_msk31 &= ~FPU_CSR_NAN2008;
-			else
-				c->fpu_csr31 |= fcsr & FPU_CSR_NAN2008;
-		} else {
-			c->options |= MIPS_CPU_NAN_LEGACY;
-		}
-
-		write_c0_status(sr);
-	} else {
-		c->options |= MIPS_CPU_NAN_LEGACY;
-	}
-}
-
-/*
- * IEEE 754 conformance mode to use.  Affects the NaN encoding and the
- * ABS.fmt/NEG.fmt execution mode.
- */
-static enum { STRICT, LEGACY, STD2008, RELAXED } ieee754 = STRICT;
-
-/*
- * Set the IEEE 754 NaN encodings and the ABS.fmt/NEG.fmt execution modes
- * to support by the FPU emulator according to the IEEE 754 conformance
- * mode selected.  Note that "relaxed" straps the emulator so that it
- * allows 2008-NaN binaries even for legacy processors.
- */
-static void cpu_set_nofpu_2008(struct cpuinfo_mips *c)
-{
-	c->options &= ~(MIPS_CPU_NAN_2008 | MIPS_CPU_NAN_LEGACY);
-	c->fpu_csr31 &= ~(FPU_CSR_ABS2008 | FPU_CSR_NAN2008);
-	c->fpu_msk31 &= ~(FPU_CSR_ABS2008 | FPU_CSR_NAN2008);
-
-	switch (ieee754) {
-	case STRICT:
-		if (c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M64R1 |
-				    MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2 |
-				    MIPS_CPU_ISA_M32R5 | MIPS_CPU_ISA_M64R5 |
-				    MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R6)) {
-			c->options |= MIPS_CPU_NAN_2008 | MIPS_CPU_NAN_LEGACY;
-		} else {
-			c->options |= MIPS_CPU_NAN_LEGACY;
-			c->fpu_msk31 |= FPU_CSR_ABS2008 | FPU_CSR_NAN2008;
-		}
-		break;
-	case LEGACY:
-		c->options |= MIPS_CPU_NAN_LEGACY;
-		c->fpu_msk31 |= FPU_CSR_ABS2008 | FPU_CSR_NAN2008;
-		break;
-	case STD2008:
-		c->options |= MIPS_CPU_NAN_2008;
-		c->fpu_csr31 |= FPU_CSR_ABS2008 | FPU_CSR_NAN2008;
-		c->fpu_msk31 |= FPU_CSR_ABS2008 | FPU_CSR_NAN2008;
-		break;
-	case RELAXED:
-		c->options |= MIPS_CPU_NAN_2008 | MIPS_CPU_NAN_LEGACY;
-		break;
-	}
-}
-
-/*
- * Override the IEEE 754 NaN encoding and ABS.fmt/NEG.fmt execution mode
- * according to the "ieee754=" parameter.
- */
-static void cpu_set_nan_2008(struct cpuinfo_mips *c)
-{
-	switch (ieee754) {
-	case STRICT:
-		mips_use_nan_legacy = !!cpu_has_nan_legacy;
-		mips_use_nan_2008 = !!cpu_has_nan_2008;
-		break;
-	case LEGACY:
-		mips_use_nan_legacy = !!cpu_has_nan_legacy;
-		mips_use_nan_2008 = !cpu_has_nan_legacy;
-		break;
-	case STD2008:
-		mips_use_nan_legacy = !cpu_has_nan_2008;
-		mips_use_nan_2008 = !!cpu_has_nan_2008;
-		break;
-	case RELAXED:
-		mips_use_nan_legacy = true;
-		mips_use_nan_2008 = true;
-		break;
-	}
-}
-
-/*
- * IEEE 754 NaN encoding and ABS.fmt/NEG.fmt execution mode override
- * settings:
- *
- * strict:  accept binaries that request a NaN encoding supported by the FPU
- * legacy:  only accept legacy-NaN binaries
- * 2008:    only accept 2008-NaN binaries
- * relaxed: accept any binaries regardless of whether supported by the FPU
- */
-static int __init ieee754_setup(char *s)
-{
-	if (!s)
-		return -1;
-	else if (!strcmp(s, "strict"))
-		ieee754 = STRICT;
-	else if (!strcmp(s, "legacy"))
-		ieee754 = LEGACY;
-	else if (!strcmp(s, "2008"))
-		ieee754 = STD2008;
-	else if (!strcmp(s, "relaxed"))
-		ieee754 = RELAXED;
-	else
-		return -1;
-
-	if (!(boot_cpu_data.options & MIPS_CPU_FPU))
-		cpu_set_nofpu_2008(&boot_cpu_data);
-	cpu_set_nan_2008(&boot_cpu_data);
-
-	return 0;
-}
-
-early_param("ieee754", ieee754_setup);
-
-/*
- * Set the FIR feature flags for the FPU emulator.
- */
-static void cpu_set_nofpu_id(struct cpuinfo_mips *c)
-{
-	u32 value;
-
-	value = 0;
-	if (c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M64R1 |
-			    MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2 |
-			    MIPS_CPU_ISA_M32R5 | MIPS_CPU_ISA_M64R5 |
-			    MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R6))
-		value |= MIPS_FPIR_D | MIPS_FPIR_S;
-	if (c->isa_level & (MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2 |
-			    MIPS_CPU_ISA_M32R5 | MIPS_CPU_ISA_M64R5 |
-			    MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R6))
-		value |= MIPS_FPIR_F64 | MIPS_FPIR_L | MIPS_FPIR_W;
-	if (c->options & MIPS_CPU_NAN_2008)
-		value |= MIPS_FPIR_HAS2008;
-	c->fpu_id = value;
-}
-
-/* Determined FPU emulator mask to use for the boot CPU with "nofpu".  */
-static unsigned int mips_nofpu_msk31;
-
-/*
- * Set options for FPU hardware.
- */
-static void cpu_set_fpu_opts(struct cpuinfo_mips *c)
-{
-	c->fpu_id = cpu_get_fpu_id();
-	mips_nofpu_msk31 = c->fpu_msk31;
-
-	if (c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M64R1 |
-			    MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2 |
-			    MIPS_CPU_ISA_M32R5 | MIPS_CPU_ISA_M64R5 |
-			    MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R6)) {
-		if (c->fpu_id & MIPS_FPIR_3D)
-			c->ases |= MIPS_ASE_MIPS3D;
-		if (c->fpu_id & MIPS_FPIR_UFRP)
-			c->options |= MIPS_CPU_UFR;
-		if (c->fpu_id & MIPS_FPIR_FREP)
-			c->options |= MIPS_CPU_FRE;
-	}
-
-	cpu_set_fpu_fcsr_mask(c);
-	cpu_set_fpu_2008(c);
-	cpu_set_nan_2008(c);
-}
-
-/*
- * Set options for the FPU emulator.
- */
-static void cpu_set_nofpu_opts(struct cpuinfo_mips *c)
-{
-	c->options &= ~MIPS_CPU_FPU;
-	c->fpu_msk31 = mips_nofpu_msk31;
-
-	cpu_set_nofpu_2008(c);
-	cpu_set_nan_2008(c);
-	cpu_set_nofpu_id(c);
-}
-
-static int mips_fpu_disabled;
-
-static int __init fpu_disable(char *s)
-{
-	cpu_set_nofpu_opts(&boot_cpu_data);
-	mips_fpu_disabled = 1;
-
-	return 1;
-}
-
-__setup("nofpu", fpu_disable);
-
-#else /* !CONFIG_MIPS_FP_SUPPORT */
-
-#define mips_fpu_disabled 1
-
-static inline unsigned long cpu_get_fpu_id(void)
-{
-	return FPIR_IMP_NONE;
-}
-
-static inline int __cpu_has_fpu(void)
-{
-	return 0;
-}
-
-static void cpu_set_fpu_opts(struct cpuinfo_mips *c)
-{
-	/* no-op */
-}
-
-static void cpu_set_nofpu_opts(struct cpuinfo_mips *c)
-{
-	/* no-op */
-}
-
-#endif /* CONFIG_MIPS_FP_SUPPORT */
-
 static inline unsigned long cpu_get_msa_id(void)
 {
 	unsigned long status, msa_id;
@@ -1600,8 +1278,9 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
 		c->options = MIPS_CPU_TLB | MIPS_CPU_4K_CACHE | MIPS_CPU_4KEX |
 			     MIPS_CPU_FPU | MIPS_CPU_32FPR |
 			     MIPS_CPU_COUNTER | MIPS_CPU_WATCH |
-			     MIPS_CPU_LLSC | MIPS_CPU_BP_GHIST;
+			     MIPS_CPU_LLSC;
 		c->tlbsize = 64;
+		write_c0_r10k_diag(read_c0_r10k_diag() | R10K_DIAG_E_GHIST);
 		break;
 	case PRID_IMP_R14000:
 		if (((c->processor_id >> 4) & 0x0f) > 2) {
@@ -1615,8 +1294,9 @@ static inline void cpu_probe_legacy(struct cpuinfo_mips *c, unsigned int cpu)
 		c->options = MIPS_CPU_TLB | MIPS_CPU_4K_CACHE | MIPS_CPU_4KEX |
 			     MIPS_CPU_FPU | MIPS_CPU_32FPR |
 			     MIPS_CPU_COUNTER | MIPS_CPU_WATCH |
-			     MIPS_CPU_LLSC | MIPS_CPU_BP_GHIST;
+			     MIPS_CPU_LLSC;
 		c->tlbsize = 64;
+		write_c0_r10k_diag(read_c0_r10k_diag() | R10K_DIAG_E_GHIST);
 		break;
 	case PRID_IMP_LOONGSON_64C:  /* Loongson-2/3 */
 		switch (c->processor_id & PRID_REV_MASK) {
@@ -2123,7 +1803,10 @@ static inline void cpu_probe_ingenic(struct cpuinfo_mips *c, unsigned int cpu)
 
 	/* XBurst does not implement the CP0 counter. */
 	c->options &= ~MIPS_CPU_COUNTER;
-	BUG_ON(!__builtin_constant_p(cpu_has_counter) || cpu_has_counter);
+	BUG_ON(__builtin_constant_p(cpu_has_counter) && cpu_has_counter);
+
+	/* XBurst has virtually tagged icache */
+	c->icache.flags |= MIPS_CACHE_VTAG;
 
 	switch (c->processor_id & PRID_IMP_MASK) {
 
@@ -2169,8 +1852,9 @@ static inline void cpu_probe_ingenic(struct cpuinfo_mips *c, unsigned int cpu)
 
 	/* XBurst®1 with MXU2.0 SIMD ISA */
 	case PRID_IMP_XBURST_REV2:
+		/* Ingenic uses the WA bit to achieve write-combine memory writes */
+		c->writecombine = _CACHE_CACHABLE_WA;
 		c->cputype = CPU_XBURST;
-		c->writecombine = _CACHE_UNCACHED_ACCELERATED;
 		__cpu_name[cpu] = "Ingenic XBurst";
 		break;
 
@@ -2372,10 +2056,6 @@ void cpu_probe(void)
 	else
 		cpu_set_nofpu_opts(c);
 
-	if (cpu_has_bp_ghist)
-		write_c0_r10k_diag(read_c0_r10k_diag() |
-				   R10K_DIAG_E_GHIST);
-
 	if (cpu_has_mips_r2_r6) {
 		c->srsets = ((read_c0_srsctl() >> 26) & 0x0f) + 1;
 		/* R2 has Performance Counter Interrupt indicator */
diff --git a/arch/mips/kernel/cpu-r3k-probe.c b/arch/mips/kernel/cpu-r3k-probe.c
new file mode 100644
index 000000000000..abdbbe8c5a43
--- /dev/null
+++ b/arch/mips/kernel/cpu-r3k-probe.c
@@ -0,0 +1,171 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Processor capabilities determination functions.
+ *
+ * Copyright (C) xxxx  the Anonymous
+ * Copyright (C) 1994 - 2006 Ralf Baechle
+ * Copyright (C) 2003, 2004  Maciej W. Rozycki
+ * Copyright (C) 2001, 2004, 2011, 2012	 MIPS Technologies, Inc.
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/ptrace.h>
+#include <linux/smp.h>
+#include <linux/stddef.h>
+#include <linux/export.h>
+
+#include <asm/bugs.h>
+#include <asm/cpu.h>
+#include <asm/cpu-features.h>
+#include <asm/cpu-type.h>
+#include <asm/fpu.h>
+#include <asm/mipsregs.h>
+#include <asm/elf.h>
+
+#include "fpu-probe.h"
+
+/* Hardware capabilities */
+unsigned int elf_hwcap __read_mostly;
+EXPORT_SYMBOL_GPL(elf_hwcap);
+
+void __init check_bugs32(void)
+{
+
+}
+
+/*
+ * Probe whether cpu has config register by trying to play with
+ * alternate cache bit and see whether it matters.
+ * It's used by cpu_probe to distinguish between R3000A and R3081.
+ */
+static inline int cpu_has_confreg(void)
+{
+#ifdef CONFIG_CPU_R3000
+	extern unsigned long r3k_cache_size(unsigned long);
+	unsigned long size1, size2;
+	unsigned long cfg = read_c0_conf();
+
+	size1 = r3k_cache_size(ST0_ISC);
+	write_c0_conf(cfg ^ R30XX_CONF_AC);
+	size2 = r3k_cache_size(ST0_ISC);
+	write_c0_conf(cfg);
+	return size1 != size2;
+#else
+	return 0;
+#endif
+}
+
+static inline void set_elf_platform(int cpu, const char *plat)
+{
+	if (cpu == 0)
+		__elf_platform = plat;
+}
+
+const char *__cpu_name[NR_CPUS];
+const char *__elf_platform;
+const char *__elf_base_platform;
+
+void cpu_probe(void)
+{
+	struct cpuinfo_mips *c = &current_cpu_data;
+	unsigned int cpu = smp_processor_id();
+
+	/*
+	 * Set a default elf platform, cpu probe may later
+	 * overwrite it with a more precise value
+	 */
+	set_elf_platform(cpu, "mips");
+
+	c->processor_id = PRID_IMP_UNKNOWN;
+	c->fpu_id	= FPIR_IMP_NONE;
+	c->cputype	= CPU_UNKNOWN;
+	c->writecombine = _CACHE_UNCACHED;
+
+	c->fpu_csr31	= FPU_CSR_RN;
+	c->fpu_msk31	= FPU_CSR_RSVD | FPU_CSR_ABS2008 | FPU_CSR_NAN2008 |
+			  FPU_CSR_CONDX | FPU_CSR_FS;
+
+	c->srsets = 1;
+
+	c->processor_id = read_c0_prid();
+	switch (c->processor_id & (PRID_COMP_MASK | PRID_IMP_MASK)) {
+	case PRID_COMP_LEGACY | PRID_IMP_R2000:
+		c->cputype = CPU_R2000;
+		__cpu_name[cpu] = "R2000";
+		c->options = MIPS_CPU_TLB | MIPS_CPU_3K_CACHE |
+			     MIPS_CPU_NOFPUEX;
+		if (__cpu_has_fpu())
+			c->options |= MIPS_CPU_FPU;
+		c->tlbsize = 64;
+		break;
+	case PRID_COMP_LEGACY | PRID_IMP_R3000:
+		if ((c->processor_id & PRID_REV_MASK) == PRID_REV_R3000A) {
+			if (cpu_has_confreg()) {
+				c->cputype = CPU_R3081E;
+				__cpu_name[cpu] = "R3081";
+			} else {
+				c->cputype = CPU_R3000A;
+				__cpu_name[cpu] = "R3000A";
+			}
+		} else {
+			c->cputype = CPU_R3000;
+			__cpu_name[cpu] = "R3000";
+		}
+		c->options = MIPS_CPU_TLB | MIPS_CPU_3K_CACHE |
+			     MIPS_CPU_NOFPUEX;
+		if (__cpu_has_fpu())
+			c->options |= MIPS_CPU_FPU;
+		c->tlbsize = 64;
+		break;
+	case PRID_COMP_LEGACY | PRID_IMP_TX39:
+		c->options = MIPS_CPU_TLB | MIPS_CPU_TX39_CACHE;
+
+		if ((c->processor_id & 0xf0) == (PRID_REV_TX3927 & 0xf0)) {
+			c->cputype = CPU_TX3927;
+			__cpu_name[cpu] = "TX3927";
+			c->tlbsize = 64;
+		} else {
+			switch (c->processor_id & PRID_REV_MASK) {
+			case PRID_REV_TX3912:
+				c->cputype = CPU_TX3912;
+				__cpu_name[cpu] = "TX3912";
+				c->tlbsize = 32;
+				break;
+			case PRID_REV_TX3922:
+				c->cputype = CPU_TX3922;
+				__cpu_name[cpu] = "TX3922";
+				c->tlbsize = 64;
+				break;
+			}
+		}
+		break;
+	}
+
+	BUG_ON(!__cpu_name[cpu]);
+	BUG_ON(c->cputype == CPU_UNKNOWN);
+
+	/*
+	 * Platform code can force the cpu type to optimize code
+	 * generation. In that case be sure the cpu type is correctly
+	 * manually setup otherwise it could trigger some nasty bugs.
+	 */
+	BUG_ON(current_cpu_type() != c->cputype);
+
+	if (mips_fpu_disabled)
+		c->options &= ~MIPS_CPU_FPU;
+
+	if (c->options & MIPS_CPU_FPU)
+		cpu_set_fpu_opts(c);
+	else
+		cpu_set_nofpu_opts(c);
+}
+
+void cpu_report(void)
+{
+	struct cpuinfo_mips *c = &current_cpu_data;
+
+	pr_info("CPU%d revision is: %08x (%s)\n",
+		smp_processor_id(), c->processor_id, cpu_name_string());
+	if (c->options & MIPS_CPU_FPU)
+		pr_info("FPU revision is: %08x\n", c->fpu_id);
+}
diff --git a/arch/mips/kernel/fpu-probe.c b/arch/mips/kernel/fpu-probe.c
new file mode 100644
index 000000000000..e689d6a83234
--- /dev/null
+++ b/arch/mips/kernel/fpu-probe.c
@@ -0,0 +1,321 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Processor capabilities determination functions.
+ *
+ * Copyright (C) xxxx  the Anonymous
+ * Copyright (C) 1994 - 2006 Ralf Baechle
+ * Copyright (C) 2003, 2004  Maciej W. Rozycki
+ * Copyright (C) 2001, 2004, 2011, 2012	 MIPS Technologies, Inc.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+
+#include <asm/bugs.h>
+#include <asm/cpu.h>
+#include <asm/cpu-features.h>
+#include <asm/cpu-type.h>
+#include <asm/elf.h>
+#include <asm/fpu.h>
+#include <asm/mipsregs.h>
+
+#include "fpu-probe.h"
+
+/*
+ * Get the FPU Implementation/Revision.
+ */
+static inline unsigned long cpu_get_fpu_id(void)
+{
+	unsigned long tmp, fpu_id;
+
+	tmp = read_c0_status();
+	__enable_fpu(FPU_AS_IS);
+	fpu_id = read_32bit_cp1_register(CP1_REVISION);
+	write_c0_status(tmp);
+	return fpu_id;
+}
+
+/*
+ * Check if the CPU has an external FPU.
+ */
+int __cpu_has_fpu(void)
+{
+	return (cpu_get_fpu_id() & FPIR_IMP_MASK) != FPIR_IMP_NONE;
+}
+
+/*
+ * Determine the FCSR mask for FPU hardware.
+ */
+static inline void cpu_set_fpu_fcsr_mask(struct cpuinfo_mips *c)
+{
+	unsigned long sr, mask, fcsr, fcsr0, fcsr1;
+
+	fcsr = c->fpu_csr31;
+	mask = FPU_CSR_ALL_X | FPU_CSR_ALL_E | FPU_CSR_ALL_S | FPU_CSR_RM;
+
+	sr = read_c0_status();
+	__enable_fpu(FPU_AS_IS);
+
+	fcsr0 = fcsr & mask;
+	write_32bit_cp1_register(CP1_STATUS, fcsr0);
+	fcsr0 = read_32bit_cp1_register(CP1_STATUS);
+
+	fcsr1 = fcsr | ~mask;
+	write_32bit_cp1_register(CP1_STATUS, fcsr1);
+	fcsr1 = read_32bit_cp1_register(CP1_STATUS);
+
+	write_32bit_cp1_register(CP1_STATUS, fcsr);
+
+	write_c0_status(sr);
+
+	c->fpu_msk31 = ~(fcsr0 ^ fcsr1) & ~mask;
+}
+
+/*
+ * Determine the IEEE 754 NaN encodings and ABS.fmt/NEG.fmt execution modes
+ * supported by FPU hardware.
+ */
+static void cpu_set_fpu_2008(struct cpuinfo_mips *c)
+{
+	if (c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M64R1 |
+			    MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2 |
+			    MIPS_CPU_ISA_M32R5 | MIPS_CPU_ISA_M64R5 |
+			    MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R6)) {
+		unsigned long sr, fir, fcsr, fcsr0, fcsr1;
+
+		sr = read_c0_status();
+		__enable_fpu(FPU_AS_IS);
+
+		fir = read_32bit_cp1_register(CP1_REVISION);
+		if (fir & MIPS_FPIR_HAS2008) {
+			fcsr = read_32bit_cp1_register(CP1_STATUS);
+
+			/*
+			 * MAC2008 toolchain never landed in real world, so
+			 * we're only testing whether it can be disabled and
+			 *  don't try to enabled it.
+			 */
+			fcsr0 = fcsr & ~(FPU_CSR_ABS2008 | FPU_CSR_NAN2008 |
+					 FPU_CSR_MAC2008);
+			write_32bit_cp1_register(CP1_STATUS, fcsr0);
+			fcsr0 = read_32bit_cp1_register(CP1_STATUS);
+
+			fcsr1 = fcsr | FPU_CSR_ABS2008 | FPU_CSR_NAN2008;
+			write_32bit_cp1_register(CP1_STATUS, fcsr1);
+			fcsr1 = read_32bit_cp1_register(CP1_STATUS);
+
+			write_32bit_cp1_register(CP1_STATUS, fcsr);
+
+			if (c->isa_level & (MIPS_CPU_ISA_M32R2 |
+					    MIPS_CPU_ISA_M64R2)) {
+				/*
+				 * The bit for MAC2008 might be reused by R6
+				 * in future, so we only test for R2-R5.
+				 */
+				if (fcsr0 & FPU_CSR_MAC2008)
+					c->options |= MIPS_CPU_MAC_2008_ONLY;
+			}
+
+			if (!(fcsr0 & FPU_CSR_NAN2008))
+				c->options |= MIPS_CPU_NAN_LEGACY;
+			if (fcsr1 & FPU_CSR_NAN2008)
+				c->options |= MIPS_CPU_NAN_2008;
+
+			if ((fcsr0 ^ fcsr1) & FPU_CSR_ABS2008)
+				c->fpu_msk31 &= ~FPU_CSR_ABS2008;
+			else
+				c->fpu_csr31 |= fcsr & FPU_CSR_ABS2008;
+
+			if ((fcsr0 ^ fcsr1) & FPU_CSR_NAN2008)
+				c->fpu_msk31 &= ~FPU_CSR_NAN2008;
+			else
+				c->fpu_csr31 |= fcsr & FPU_CSR_NAN2008;
+		} else {
+			c->options |= MIPS_CPU_NAN_LEGACY;
+		}
+
+		write_c0_status(sr);
+	} else {
+		c->options |= MIPS_CPU_NAN_LEGACY;
+	}
+}
+
+/*
+ * IEEE 754 conformance mode to use.  Affects the NaN encoding and the
+ * ABS.fmt/NEG.fmt execution mode.
+ */
+static enum { STRICT, LEGACY, STD2008, RELAXED } ieee754 = STRICT;
+
+/*
+ * Set the IEEE 754 NaN encodings and the ABS.fmt/NEG.fmt execution modes
+ * to support by the FPU emulator according to the IEEE 754 conformance
+ * mode selected.  Note that "relaxed" straps the emulator so that it
+ * allows 2008-NaN binaries even for legacy processors.
+ */
+static void cpu_set_nofpu_2008(struct cpuinfo_mips *c)
+{
+	c->options &= ~(MIPS_CPU_NAN_2008 | MIPS_CPU_NAN_LEGACY);
+	c->fpu_csr31 &= ~(FPU_CSR_ABS2008 | FPU_CSR_NAN2008);
+	c->fpu_msk31 &= ~(FPU_CSR_ABS2008 | FPU_CSR_NAN2008);
+
+	switch (ieee754) {
+	case STRICT:
+		if (c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M64R1 |
+				    MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2 |
+				    MIPS_CPU_ISA_M32R5 | MIPS_CPU_ISA_M64R5 |
+				    MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R6)) {
+			c->options |= MIPS_CPU_NAN_2008 | MIPS_CPU_NAN_LEGACY;
+		} else {
+			c->options |= MIPS_CPU_NAN_LEGACY;
+			c->fpu_msk31 |= FPU_CSR_ABS2008 | FPU_CSR_NAN2008;
+		}
+		break;
+	case LEGACY:
+		c->options |= MIPS_CPU_NAN_LEGACY;
+		c->fpu_msk31 |= FPU_CSR_ABS2008 | FPU_CSR_NAN2008;
+		break;
+	case STD2008:
+		c->options |= MIPS_CPU_NAN_2008;
+		c->fpu_csr31 |= FPU_CSR_ABS2008 | FPU_CSR_NAN2008;
+		c->fpu_msk31 |= FPU_CSR_ABS2008 | FPU_CSR_NAN2008;
+		break;
+	case RELAXED:
+		c->options |= MIPS_CPU_NAN_2008 | MIPS_CPU_NAN_LEGACY;
+		break;
+	}
+}
+
+/*
+ * Override the IEEE 754 NaN encoding and ABS.fmt/NEG.fmt execution mode
+ * according to the "ieee754=" parameter.
+ */
+static void cpu_set_nan_2008(struct cpuinfo_mips *c)
+{
+	switch (ieee754) {
+	case STRICT:
+		mips_use_nan_legacy = !!cpu_has_nan_legacy;
+		mips_use_nan_2008 = !!cpu_has_nan_2008;
+		break;
+	case LEGACY:
+		mips_use_nan_legacy = !!cpu_has_nan_legacy;
+		mips_use_nan_2008 = !cpu_has_nan_legacy;
+		break;
+	case STD2008:
+		mips_use_nan_legacy = !cpu_has_nan_2008;
+		mips_use_nan_2008 = !!cpu_has_nan_2008;
+		break;
+	case RELAXED:
+		mips_use_nan_legacy = true;
+		mips_use_nan_2008 = true;
+		break;
+	}
+}
+
+/*
+ * IEEE 754 NaN encoding and ABS.fmt/NEG.fmt execution mode override
+ * settings:
+ *
+ * strict:  accept binaries that request a NaN encoding supported by the FPU
+ * legacy:  only accept legacy-NaN binaries
+ * 2008:    only accept 2008-NaN binaries
+ * relaxed: accept any binaries regardless of whether supported by the FPU
+ */
+static int __init ieee754_setup(char *s)
+{
+	if (!s)
+		return -1;
+	else if (!strcmp(s, "strict"))
+		ieee754 = STRICT;
+	else if (!strcmp(s, "legacy"))
+		ieee754 = LEGACY;
+	else if (!strcmp(s, "2008"))
+		ieee754 = STD2008;
+	else if (!strcmp(s, "relaxed"))
+		ieee754 = RELAXED;
+	else
+		return -1;
+
+	if (!(boot_cpu_data.options & MIPS_CPU_FPU))
+		cpu_set_nofpu_2008(&boot_cpu_data);
+	cpu_set_nan_2008(&boot_cpu_data);
+
+	return 0;
+}
+
+early_param("ieee754", ieee754_setup);
+
+/*
+ * Set the FIR feature flags for the FPU emulator.
+ */
+static void cpu_set_nofpu_id(struct cpuinfo_mips *c)
+{
+	u32 value;
+
+	value = 0;
+	if (c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M64R1 |
+			    MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2 |
+			    MIPS_CPU_ISA_M32R5 | MIPS_CPU_ISA_M64R5 |
+			    MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R6))
+		value |= MIPS_FPIR_D | MIPS_FPIR_S;
+	if (c->isa_level & (MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2 |
+			    MIPS_CPU_ISA_M32R5 | MIPS_CPU_ISA_M64R5 |
+			    MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R6))
+		value |= MIPS_FPIR_F64 | MIPS_FPIR_L | MIPS_FPIR_W;
+	if (c->options & MIPS_CPU_NAN_2008)
+		value |= MIPS_FPIR_HAS2008;
+	c->fpu_id = value;
+}
+
+/* Determined FPU emulator mask to use for the boot CPU with "nofpu".  */
+static unsigned int mips_nofpu_msk31;
+
+/*
+ * Set options for FPU hardware.
+ */
+void cpu_set_fpu_opts(struct cpuinfo_mips *c)
+{
+	c->fpu_id = cpu_get_fpu_id();
+	mips_nofpu_msk31 = c->fpu_msk31;
+
+	if (c->isa_level & (MIPS_CPU_ISA_M32R1 | MIPS_CPU_ISA_M64R1 |
+			    MIPS_CPU_ISA_M32R2 | MIPS_CPU_ISA_M64R2 |
+			    MIPS_CPU_ISA_M32R5 | MIPS_CPU_ISA_M64R5 |
+			    MIPS_CPU_ISA_M32R6 | MIPS_CPU_ISA_M64R6)) {
+		if (c->fpu_id & MIPS_FPIR_3D)
+			c->ases |= MIPS_ASE_MIPS3D;
+		if (c->fpu_id & MIPS_FPIR_UFRP)
+			c->options |= MIPS_CPU_UFR;
+		if (c->fpu_id & MIPS_FPIR_FREP)
+			c->options |= MIPS_CPU_FRE;
+	}
+
+	cpu_set_fpu_fcsr_mask(c);
+	cpu_set_fpu_2008(c);
+	cpu_set_nan_2008(c);
+}
+
+/*
+ * Set options for the FPU emulator.
+ */
+void cpu_set_nofpu_opts(struct cpuinfo_mips *c)
+{
+	c->options &= ~MIPS_CPU_FPU;
+	c->fpu_msk31 = mips_nofpu_msk31;
+
+	cpu_set_nofpu_2008(c);
+	cpu_set_nan_2008(c);
+	cpu_set_nofpu_id(c);
+}
+
+int mips_fpu_disabled;
+
+static int __init fpu_disable(char *s)
+{
+	cpu_set_nofpu_opts(&boot_cpu_data);
+	mips_fpu_disabled = 1;
+
+	return 1;
+}
+
+__setup("nofpu", fpu_disable);
+
diff --git a/arch/mips/kernel/fpu-probe.h b/arch/mips/kernel/fpu-probe.h
new file mode 100644
index 000000000000..951ce50890d0
--- /dev/null
+++ b/arch/mips/kernel/fpu-probe.h
@@ -0,0 +1,40 @@
+/* SPDX-License-Identifier: GPL-2.0-or-later */
+
+#include <linux/kernel.h>
+
+#include <asm/cpu.h>
+#include <asm/cpu-info.h>
+
+#ifdef CONFIG_MIPS_FP_SUPPORT
+
+extern int mips_fpu_disabled;
+
+int __cpu_has_fpu(void);
+void cpu_set_fpu_opts(struct cpuinfo_mips *c);
+void cpu_set_nofpu_opts(struct cpuinfo_mips *c);
+
+#else /* !CONFIG_MIPS_FP_SUPPORT */
+
+#define mips_fpu_disabled 1
+
+static inline unsigned long cpu_get_fpu_id(void)
+{
+	return FPIR_IMP_NONE;
+}
+
+static inline int __cpu_has_fpu(void)
+{
+	return 0;
+}
+
+static inline void cpu_set_fpu_opts(struct cpuinfo_mips *c)
+{
+	/* no-op */
+}
+
+static inline void cpu_set_nofpu_opts(struct cpuinfo_mips *c)
+{
+	/* no-op */
+}
+
+#endif /* CONFIG_MIPS_FP_SUPPORT */
diff --git a/arch/mips/kernel/ftrace.c b/arch/mips/kernel/ftrace.c
index 2625232bfe52..f57e68f40a34 100644
--- a/arch/mips/kernel/ftrace.c
+++ b/arch/mips/kernel/ftrace.c
@@ -37,10 +37,6 @@ void arch_ftrace_update_code(int command)
 	ftrace_modify_all_code(command);
 }
 
-#endif
-
-#ifdef CONFIG_DYNAMIC_FTRACE
-
 #define JAL 0x0c000000		/* jump & link: ip --> ra, jump to target */
 #define ADDR_MASK 0x03ffffff	/*  op_code|addr : 31...26|25 ....0 */
 #define JUMP_RANGE_MASK ((1UL << 28) - 1)
diff --git a/arch/mips/kernel/head.S b/arch/mips/kernel/head.S
index 7dd234e788e6..61b73580b877 100644
--- a/arch/mips/kernel/head.S
+++ b/arch/mips/kernel/head.S
@@ -35,7 +35,7 @@
 	.macro	setup_c0_status set clr
 	.set	push
 	mfc0	t0, CP0_STATUS
-	or	t0, ST0_CU0|\set|0x1f|\clr
+	or	t0, ST0_KERNEL_CUMASK|\set|0x1f|\clr
 	xor	t0, 0x1f|\clr
 	mtc0	t0, CP0_STATUS
 	.set	noreorder
diff --git a/arch/mips/kernel/mips-mt-fpaff.c b/arch/mips/kernel/mips-mt-fpaff.c
index 1a08428eedcf..6c590ef27648 100644
--- a/arch/mips/kernel/mips-mt-fpaff.c
+++ b/arch/mips/kernel/mips-mt-fpaff.c
@@ -167,7 +167,7 @@ asmlinkage long mipsmt_sys_sched_getaffinity(pid_t pid, unsigned int len,
 		return -EINVAL;
 
 	get_online_cpus();
-	read_lock(&tasklist_lock);
+	rcu_read_lock();
 
 	retval = -ESRCH;
 	p = find_process_by_pid(pid);
@@ -181,7 +181,7 @@ asmlinkage long mipsmt_sys_sched_getaffinity(pid_t pid, unsigned int len,
 	cpumask_and(&mask, &allowed, cpu_active_mask);
 
 out_unlock:
-	read_unlock(&tasklist_lock);
+	rcu_read_unlock();
 	put_online_cpus();
 	if (retval)
 		return retval;
diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c
index f5dc316a826a..75ebd8d7bd5d 100644
--- a/arch/mips/kernel/process.c
+++ b/arch/mips/kernel/process.c
@@ -52,6 +52,7 @@
 #include <asm/inst.h>
 #include <asm/stacktrace.h>
 #include <asm/irq_regs.h>
+#include <asm/exec.h>
 
 #ifdef CONFIG_HOTPLUG_CPU
 void arch_cpu_idle_dead(void)
@@ -68,7 +69,7 @@ void start_thread(struct pt_regs * regs, unsigned long pc, unsigned long sp)
 	unsigned long status;
 
 	/* New thread loses kernel privileges. */
-	status = regs->cp0_status & ~(ST0_CU0|ST0_CU1|ST0_FR|KU_MASK);
+	status = regs->cp0_status & ~(ST0_CU0|ST0_CU1|ST0_CU2|ST0_FR|KU_MASK);
 	status |= KU_USER;
 	regs->cp0_status = status;
 	lose_fpu(0);
@@ -133,7 +134,7 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
 	childregs = (struct pt_regs *) childksp - 1;
 	/*  Put the stack after the struct pt_regs.  */
 	childksp = (unsigned long) childregs;
-	p->thread.cp0_status = read_c0_status() & ~(ST0_CU2|ST0_CU1);
+	p->thread.cp0_status = (read_c0_status() & ~(ST0_CU2|ST0_CU1)) | ST0_KERNEL_CUMASK;
 	if (unlikely(p->flags & PF_KTHREAD)) {
 		/* kernel thread */
 		unsigned long status = p->thread.cp0_status;
@@ -279,7 +280,21 @@ static inline int is_ra_save_ins(union mips_instruction *ip, int *poff)
 		*poff = ip->i_format.simmediate / sizeof(ulong);
 		return 1;
 	}
-
+#ifdef CONFIG_CPU_LOONGSON64
+	if ((ip->loongson3_lswc2_format.opcode == swc2_op) &&
+		      (ip->loongson3_lswc2_format.ls == 1) &&
+		      (ip->loongson3_lswc2_format.fr == 0) &&
+		      (ip->loongson3_lswc2_format.base == 29)) {
+		if (ip->loongson3_lswc2_format.rt == 31) {
+			*poff = ip->loongson3_lswc2_format.offset << 1;
+			return 1;
+		}
+		if (ip->loongson3_lswc2_format.rq == 31) {
+			*poff = (ip->loongson3_lswc2_format.offset << 1) + 1;
+			return 1;
+		}
+	}
+#endif
 	return 0;
 #endif
 }
diff --git a/arch/mips/kernel/prom.c b/arch/mips/kernel/prom.c
index 9e50dc8df2f6..6abebd57b218 100644
--- a/arch/mips/kernel/prom.c
+++ b/arch/mips/kernel/prom.c
@@ -36,31 +36,6 @@ char *mips_get_machine_name(void)
 }
 
 #ifdef CONFIG_USE_OF
-void __init early_init_dt_add_memory_arch(u64 base, u64 size)
-{
-	if (base >= PHYS_ADDR_MAX) {
-		pr_warn("Trying to add an invalid memory region, skipped\n");
-		return;
-	}
-
-	/* Truncate the passed memory region instead of type casting */
-	if (base + size - 1 >= PHYS_ADDR_MAX || base + size < base) {
-		pr_warn("Truncate memory region %llx @ %llx to size %llx\n",
-			size, base, PHYS_ADDR_MAX - base);
-		size = PHYS_ADDR_MAX - base;
-	}
-
-	add_memory_region(base, size, BOOT_MEM_RAM);
-}
-
-int __init early_init_dt_reserve_memory_arch(phys_addr_t base,
-					phys_addr_t size, bool nomap)
-{
-	add_memory_region(base, size,
-			  nomap ? BOOT_MEM_NOMAP : BOOT_MEM_RESERVED);
-
-	return 0;
-}
 
 void __init __dt_setup_arch(void *bph)
 {
diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c
index ee8636ccded2..fccdbe2e7c2b 100644
--- a/arch/mips/kernel/setup.c
+++ b/arch/mips/kernel/setup.c
@@ -91,45 +91,6 @@ unsigned long ARCH_PFN_OFFSET;
 EXPORT_SYMBOL(ARCH_PFN_OFFSET);
 #endif
 
-void __init add_memory_region(phys_addr_t start, phys_addr_t size, long type)
-{
-	/*
-	 * Note: This function only exists for historical reason,
-	 * new code should use memblock_add or memblock_add_node instead.
-	 */
-
-	/*
-	 * If the region reaches the top of the physical address space, adjust
-	 * the size slightly so that (start + size) doesn't overflow
-	 */
-	if (start + size - 1 == PHYS_ADDR_MAX)
-		--size;
-
-	/* Sanity check */
-	if (start + size < start) {
-		pr_warn("Trying to add an invalid memory region, skipped\n");
-		return;
-	}
-
-	if (start < PHYS_OFFSET)
-		return;
-
-	memblock_add(start, size);
-	/* Reserve any memory except the ordinary RAM ranges. */
-	switch (type) {
-	case BOOT_MEM_RAM:
-		break;
-
-	case BOOT_MEM_NOMAP: /* Discard the range from the system. */
-		memblock_remove(start, size);
-		break;
-
-	default: /* Reserve the rest of the memory types at boot time */
-		memblock_reserve(start, size);
-		break;
-	}
-}
-
 void __init detect_memory_region(phys_addr_t start, phys_addr_t sz_min, phys_addr_t sz_max)
 {
 	void *dm = &detect_magic;
@@ -146,7 +107,7 @@ void __init detect_memory_region(phys_addr_t start, phys_addr_t sz_min, phys_add
 		((unsigned long long) sz_min) / SZ_1M,
 		((unsigned long long) sz_max) / SZ_1M);
 
-	add_memory_region(start, size, BOOT_MEM_RAM);
+	memblock_add(start, size);
 }
 
 /*
@@ -396,7 +357,7 @@ static int __init early_parse_mem(char *p)
 	if (*p == '@')
 		start = memparse(p + 1, &p);
 
-	add_memory_region(start, size, BOOT_MEM_RAM);
+	memblock_add(start, size);
 
 	return 0;
 }
@@ -422,13 +383,14 @@ static int __init early_parse_memmap(char *p)
 
 	if (*p == '@') {
 		start_at = memparse(p+1, &p);
-		add_memory_region(start_at, mem_size, BOOT_MEM_RAM);
+		memblock_add(start_at, mem_size);
 	} else if (*p == '#') {
 		pr_err("\"memmap=nn#ss\" (force ACPI data) invalid on MIPS\n");
 		return -EINVAL;
 	} else if (*p == '$') {
 		start_at = memparse(p+1, &p);
-		add_memory_region(start_at, mem_size, BOOT_MEM_RESERVED);
+		memblock_add(start_at, mem_size);
+		memblock_reserve(start_at, mem_size);
 	} else {
 		pr_err("\"memmap\" invalid format!\n");
 		return -EINVAL;
@@ -443,7 +405,7 @@ static int __init early_parse_memmap(char *p)
 early_param("memmap", early_parse_memmap);
 
 #ifdef CONFIG_PROC_VMCORE
-unsigned long setup_elfcorehdr, setup_elfcorehdr_size;
+static unsigned long setup_elfcorehdr, setup_elfcorehdr_size;
 static int __init early_parse_elfcorehdr(char *p)
 {
 	phys_addr_t start, end;
@@ -472,6 +434,11 @@ early_param("elfcorehdr", early_parse_elfcorehdr);
 #endif
 
 #ifdef CONFIG_KEXEC
+
+/* 64M alignment for crash kernel regions */
+#define CRASH_ALIGN	SZ_64M
+#define CRASH_ADDR_MAX	SZ_512M
+
 static void __init mips_parse_crashkernel(void)
 {
 	unsigned long long total_mem;
@@ -484,9 +451,22 @@ static void __init mips_parse_crashkernel(void)
 	if (ret != 0 || crash_size <= 0)
 		return;
 
-	if (!memblock_find_in_range(crash_base, crash_base + crash_size, crash_size, 1)) {
-		pr_warn("Invalid memory region reserved for crash kernel\n");
-		return;
+	if (crash_base <= 0) {
+		crash_base = memblock_find_in_range(CRASH_ALIGN, CRASH_ADDR_MAX,
+							crash_size, CRASH_ALIGN);
+		if (!crash_base) {
+			pr_warn("crashkernel reservation failed - No suitable area found.\n");
+			return;
+		}
+	} else {
+		unsigned long long start;
+
+		start = memblock_find_in_range(crash_base, crash_base + crash_size,
+						crash_size, 1);
+		if (start != crash_base) {
+			pr_warn("Invalid memory region reserved for crash kernel\n");
+			return;
+		}
 	}
 
 	crashk_res.start = crash_base;
@@ -621,7 +601,7 @@ static void __init bootcmdline_init(void)
  * arch_mem_init - initialize memory management subsystem
  *
  *  o plat_mem_setup() detects the memory configuration and will record detected
- *    memory areas using add_memory_region.
+ *    memory areas using memblock_add.
  *
  * At this stage the memory configuration of the system is known to the
  * kernel but generic memory management system is still entirely uninitialized.
diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c
index a0262729cd4c..f44265025281 100644
--- a/arch/mips/kernel/signal.c
+++ b/arch/mips/kernel/signal.c
@@ -545,6 +545,12 @@ int restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc)
 	return err ?: protected_restore_fp_context(sc);
 }
 
+#ifdef CONFIG_WAR_ICACHE_REFILLS
+#define SIGMASK		~(cpu_icache_line_size()-1)
+#else
+#define SIGMASK		ALMASK
+#endif
+
 void __user *get_sigframe(struct ksignal *ksig, struct pt_regs *regs,
 			  size_t frame_size)
 {
@@ -565,7 +571,7 @@ void __user *get_sigframe(struct ksignal *ksig, struct pt_regs *regs,
 
 	sp = sigsp(sp, ksig);
 
-	return (void __user *)((sp - frame_size) & (ICACHE_REFILLS_WORKAROUND_WAR ? ~(cpu_icache_line_size()-1) : ALMASK));
+	return (void __user *)((sp - frame_size) & SIGMASK);
 }
 
 /*
diff --git a/arch/mips/kernel/syscall.c b/arch/mips/kernel/syscall.c
index c333e5788664..2afa3eef486a 100644
--- a/arch/mips/kernel/syscall.c
+++ b/arch/mips/kernel/syscall.c
@@ -106,7 +106,7 @@ static inline int mips_atomic_set(unsigned long addr, unsigned long new)
 	if (unlikely(!access_ok((const void __user *)addr, 4)))
 		return -EINVAL;
 
-	if (cpu_has_llsc && R10000_LLSC_WAR) {
+	if (cpu_has_llsc && IS_ENABLED(CONFIG_WAR_R10000_LLSC)) {
 		__asm__ __volatile__ (
 		"	.set	push					\n"
 		"	.set	arch=r4000				\n"
diff --git a/arch/mips/kernel/traps.c b/arch/mips/kernel/traps.c
index cf788591f091..e0352958e2f7 100644
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -2204,7 +2204,7 @@ static void configure_status(void)
 	 * flag that some firmware may have left set and the TS bit (for
 	 * IP27).  Set XX for ISA IV code to work.
 	 */
-	unsigned int status_set = ST0_CU0;
+	unsigned int status_set = ST0_KERNEL_CUMASK;
 #ifdef CONFIG_64BIT
 	status_set |= ST0_FR|ST0_KX|ST0_SX|ST0_UX;
 #endif