powerpc: drop MPC8540_ADS and MPC8560_ADS platform support

Based on the revision history in the manual(s), these e500-v1
platforms were first available around 2002.

Like a lot of evaluation boards, they attempted to provide break-out
connectors for all possible features, and that combined with four
PCI-X slots (and the age/era) meant for a considerably large board.

As I recall it, from a Linux point of view, the biggest difference
between 8540 and 8560 was in the UART implementation, and that is
reflected in a diff of the defconfigs.

In any case, these are over 20 years old, and by today's standards
only have a small amount of DDR1 memory, and were not widely available.

Given that, it makes sense to remove support from them in 2023.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230620043300.197546-2-paul.gortmaker@windriver.com

2 files changed, 0 insertions, 743 deletions

diff --git a/arch/powerpc/boot/dts/fsl/mpc8540ads.dts b/arch/powerpc/boot/dts/fsl/mpc8540ads.dts
deleted file mode 100644
index e03ae130162b..000000000000
--- a/arch/powerpc/boot/dts/fsl/mpc8540ads.dts
+++ /dev/null
@@ -1,355 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * MPC8540 ADS Device Tree Source
- *
- * Copyright 2006, 2008 Freescale Semiconductor Inc.
- */
-
-/dts-v1/;
-
-/include/ "e500v1_power_isa.dtsi"
-
-/ {
-	model = "MPC8540ADS";
-	compatible = "MPC8540ADS", "MPC85xxADS";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		ethernet2 = &enet2;
-		serial0 = &serial0;
-		serial1 = &serial1;
-		pci0 = &pci0;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8540@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			d-cache-line-size = <32>;	// 32 bytes
-			i-cache-line-size = <32>;	// 32 bytes
-			d-cache-size = <0x8000>;		// L1, 32K
-			i-cache-size = <0x8000>;		// L1, 32K
-			timebase-frequency = <0>;	//  33 MHz, from uboot
-			bus-frequency = <0>;	// 166 MHz
-			clock-frequency = <0>;	// 825 MHz, from uboot
-			next-level-cache = <&L2>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x8000000>;	// 128M at 0x0
-	};
-
-	soc8540@e0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "simple-bus";
-		ranges = <0x0 0xe0000000 0x100000>;
-		bus-frequency = <0>;
-
-		ecm-law@0 {
-			compatible = "fsl,ecm-law";
-			reg = <0x0 0x1000>;
-			fsl,num-laws = <8>;
-		};
-
-		ecm@1000 {
-			compatible = "fsl,mpc8540-ecm", "fsl,ecm";
-			reg = <0x1000 0x1000>;
-			interrupts = <17 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		memory-controller@2000 {
-			compatible = "fsl,mpc8540-memory-controller";
-			reg = <0x2000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <18 2>;
-		};
-
-		L2: l2-cache-controller@20000 {
-			compatible = "fsl,mpc8540-l2-cache-controller";
-			reg = <0x20000 0x1000>;
-			cache-line-size = <32>;	// 32 bytes
-			cache-size = <0x40000>;	// L2, 256K
-			interrupt-parent = <&mpic>;
-			interrupts = <16 2>;
-		};
-
-		i2c@3000 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			cell-index = <0>;
-			compatible = "fsl-i2c";
-			reg = <0x3000 0x100>;
-			interrupts = <43 2>;
-			interrupt-parent = <&mpic>;
-			dfsrr;
-		};
-
-		dma@21300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8540-dma", "fsl,eloplus-dma";
-			reg = <0x21300 0x4>;
-			ranges = <0x0 0x21100 0x200>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,mpc8540-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&mpic>;
-				interrupts = <20 2>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,mpc8540-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&mpic>;
-				interrupts = <21 2>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,mpc8540-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&mpic>;
-				interrupts = <22 2>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,mpc8540-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupt-parent = <&mpic>;
-				interrupts = <23 2>;
-			};
-		};
-
-		enet0: ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <0>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x24000 0x1000>;
-			ranges = <0x0 0x24000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <29 2 30 2 34 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi0>;
-			phy-handle = <&phy0>;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-mdio";
-				reg = <0x520 0x20>;
-
-				phy0: ethernet-phy@0 {
-					interrupt-parent = <&mpic>;
-					interrupts = <5 1>;
-					reg = <0x0>;
-				};
-				phy1: ethernet-phy@1 {
-					interrupt-parent = <&mpic>;
-					interrupts = <5 1>;
-					reg = <0x1>;
-				};
-				phy3: ethernet-phy@3 {
-					interrupt-parent = <&mpic>;
-					interrupts = <7 1>;
-					reg = <0x3>;
-				};
-				tbi0: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		enet1: ethernet@25000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <1>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x25000 0x1000>;
-			ranges = <0x0 0x25000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <35 2 36 2 40 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi1>;
-			phy-handle = <&phy1>;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi1: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		enet2: ethernet@26000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <2>;
-			device_type = "network";
-			model = "FEC";
-			compatible = "gianfar";
-			reg = <0x26000 0x1000>;
-			ranges = <0x0 0x26000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <41 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi2>;
-			phy-handle = <&phy3>;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi2: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		serial0: serial@4500 {
-			cell-index = <0>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4500 0x100>; 	// reg base, size
-			clock-frequency = <0>; 	// should we fill in in uboot?
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		serial1: serial@4600 {
-			cell-index = <1>;
-			device_type = "serial";
-			compatible = "fsl,ns16550", "ns16550";
-			reg = <0x4600 0x100>;	// reg base, size
-			clock-frequency = <0>; 	// should we fill in in uboot?
-			interrupts = <42 2>;
-			interrupt-parent = <&mpic>;
-		};
-		mpic: pic@40000 {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x40000 0x40000>;
-			compatible = "chrp,open-pic";
-			device_type = "open-pic";
-		};
-	};
-
-	pci0: pci@e0008000 {
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-
-			/* IDSEL 0x02 */
-			0x1000 0x0 0x0 0x1 &mpic 0x1 0x1
-			0x1000 0x0 0x0 0x2 &mpic 0x2 0x1
-			0x1000 0x0 0x0 0x3 &mpic 0x3 0x1
-			0x1000 0x0 0x0 0x4 &mpic 0x4 0x1
-
-			/* IDSEL 0x03 */
-			0x1800 0x0 0x0 0x1 &mpic 0x4 0x1
-			0x1800 0x0 0x0 0x2 &mpic 0x1 0x1
-			0x1800 0x0 0x0 0x3 &mpic 0x2 0x1
-			0x1800 0x0 0x0 0x4 &mpic 0x3 0x1
-
-			/* IDSEL 0x04 */
-			0x2000 0x0 0x0 0x1 &mpic 0x3 0x1
-			0x2000 0x0 0x0 0x2 &mpic 0x4 0x1
-			0x2000 0x0 0x0 0x3 &mpic 0x1 0x1
-			0x2000 0x0 0x0 0x4 &mpic 0x2 0x1
-
-			/* IDSEL 0x05 */
-			0x2800 0x0 0x0 0x1 &mpic 0x2 0x1
-			0x2800 0x0 0x0 0x2 &mpic 0x3 0x1
-			0x2800 0x0 0x0 0x3 &mpic 0x4 0x1
-			0x2800 0x0 0x0 0x4 &mpic 0x1 0x1
-
-			/* IDSEL 0x0c */
-			0x6000 0x0 0x0 0x1 &mpic 0x1 0x1
-			0x6000 0x0 0x0 0x2 &mpic 0x2 0x1
-			0x6000 0x0 0x0 0x3 &mpic 0x3 0x1
-			0x6000 0x0 0x0 0x4 &mpic 0x4 0x1
-
-			/* IDSEL 0x0d */
-			0x6800 0x0 0x0 0x1 &mpic 0x4 0x1
-			0x6800 0x0 0x0 0x2 &mpic 0x1 0x1
-			0x6800 0x0 0x0 0x3 &mpic 0x2 0x1
-			0x6800 0x0 0x0 0x4 &mpic 0x3 0x1
-
-			/* IDSEL 0x0e */
-			0x7000 0x0 0x0 0x1 &mpic 0x3 0x1
-			0x7000 0x0 0x0 0x2 &mpic 0x4 0x1
-			0x7000 0x0 0x0 0x3 &mpic 0x1 0x1
-			0x7000 0x0 0x0 0x4 &mpic 0x2 0x1
-
-			/* IDSEL 0x0f */
-			0x7800 0x0 0x0 0x1 &mpic 0x2 0x1
-			0x7800 0x0 0x0 0x2 &mpic 0x3 0x1
-			0x7800 0x0 0x0 0x3 &mpic 0x4 0x1
-			0x7800 0x0 0x0 0x4 &mpic 0x1 0x1
-
-			/* IDSEL 0x12 */
-			0x9000 0x0 0x0 0x1 &mpic 0x1 0x1
-			0x9000 0x0 0x0 0x2 &mpic 0x2 0x1
-			0x9000 0x0 0x0 0x3 &mpic 0x3 0x1
-			0x9000 0x0 0x0 0x4 &mpic 0x4 0x1
-
-			/* IDSEL 0x13 */
-			0x9800 0x0 0x0 0x1 &mpic 0x4 0x1
-			0x9800 0x0 0x0 0x2 &mpic 0x1 0x1
-			0x9800 0x0 0x0 0x3 &mpic 0x2 0x1
-			0x9800 0x0 0x0 0x4 &mpic 0x3 0x1
-
-			/* IDSEL 0x14 */
-			0xa000 0x0 0x0 0x1 &mpic 0x3 0x1
-			0xa000 0x0 0x0 0x2 &mpic 0x4 0x1
-			0xa000 0x0 0x0 0x3 &mpic 0x1 0x1
-			0xa000 0x0 0x0 0x4 &mpic 0x2 0x1
-
-			/* IDSEL 0x15 */
-			0xa800 0x0 0x0 0x1 &mpic 0x2 0x1
-			0xa800 0x0 0x0 0x2 &mpic 0x3 0x1
-			0xa800 0x0 0x0 0x3 &mpic 0x4 0x1
-			0xa800 0x0 0x0 0x4 &mpic 0x1 0x1>;
-		interrupt-parent = <&mpic>;
-		interrupts = <24 2>;
-		bus-range = <0 0>;
-		ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
-			  0x1000000 0x0 0x0 0xe2000000 0x0 0x100000>;
-		clock-frequency = <66666666>;
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		reg = <0xe0008000 0x1000>;
-		compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
-		device_type = "pci";
-	};
-};
diff --git a/arch/powerpc/boot/dts/fsl/mpc8560ads.dts b/arch/powerpc/boot/dts/fsl/mpc8560ads.dts
deleted file mode 100644
index c2f9aea78b29..000000000000
--- a/arch/powerpc/boot/dts/fsl/mpc8560ads.dts
+++ /dev/null
@@ -1,388 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * MPC8560 ADS Device Tree Source
- *
- * Copyright 2006, 2008 Freescale Semiconductor Inc.
- */
-
-/dts-v1/;
-
-/include/ "e500v1_power_isa.dtsi"
-
-/ {
-	model = "MPC8560ADS";
-	compatible = "MPC8560ADS", "MPC85xxADS";
-	#address-cells = <1>;
-	#size-cells = <1>;
-
-	aliases {
-		ethernet0 = &enet0;
-		ethernet1 = &enet1;
-		ethernet2 = &enet2;
-		ethernet3 = &enet3;
-		serial0 = &serial0;
-		serial1 = &serial1;
-		pci0 = &pci0;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		PowerPC,8560@0 {
-			device_type = "cpu";
-			reg = <0x0>;
-			d-cache-line-size = <32>;	// 32 bytes
-			i-cache-line-size = <32>;	// 32 bytes
-			d-cache-size = <0x8000>;		// L1, 32K
-			i-cache-size = <0x8000>;		// L1, 32K
-			timebase-frequency = <82500000>;
-			bus-frequency = <330000000>;
-			clock-frequency = <825000000>;
-		};
-	};
-
-	memory {
-		device_type = "memory";
-		reg = <0x0 0x10000000>;
-	};
-
-	soc8560@e0000000 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		device_type = "soc";
-		compatible = "simple-bus";
-		ranges = <0x0 0xe0000000 0x100000>;
-		bus-frequency = <330000000>;
-
-		ecm-law@0 {
-			compatible = "fsl,ecm-law";
-			reg = <0x0 0x1000>;
-			fsl,num-laws = <8>;
-		};
-
-		ecm@1000 {
-			compatible = "fsl,mpc8560-ecm", "fsl,ecm";
-			reg = <0x1000 0x1000>;
-			interrupts = <17 2>;
-			interrupt-parent = <&mpic>;
-		};
-
-		memory-controller@2000 {
-			compatible = "fsl,mpc8540-memory-controller";
-			reg = <0x2000 0x1000>;
-			interrupt-parent = <&mpic>;
-			interrupts = <18 2>;
-		};
-
-		L2: l2-cache-controller@20000 {
-			compatible = "fsl,mpc8540-l2-cache-controller";
-			reg = <0x20000 0x1000>;
-			cache-line-size = <32>;	// 32 bytes
-			cache-size = <0x40000>;	// L2, 256K
-			interrupt-parent = <&mpic>;
-			interrupts = <16 2>;
-		};
-
-		dma@21300 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8560-dma", "fsl,eloplus-dma";
-			reg = <0x21300 0x4>;
-			ranges = <0x0 0x21100 0x200>;
-			cell-index = <0>;
-			dma-channel@0 {
-				compatible = "fsl,mpc8560-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x0 0x80>;
-				cell-index = <0>;
-				interrupt-parent = <&mpic>;
-				interrupts = <20 2>;
-			};
-			dma-channel@80 {
-				compatible = "fsl,mpc8560-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x80 0x80>;
-				cell-index = <1>;
-				interrupt-parent = <&mpic>;
-				interrupts = <21 2>;
-			};
-			dma-channel@100 {
-				compatible = "fsl,mpc8560-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x100 0x80>;
-				cell-index = <2>;
-				interrupt-parent = <&mpic>;
-				interrupts = <22 2>;
-			};
-			dma-channel@180 {
-				compatible = "fsl,mpc8560-dma-channel",
-						"fsl,eloplus-dma-channel";
-				reg = <0x180 0x80>;
-				cell-index = <3>;
-				interrupt-parent = <&mpic>;
-				interrupts = <23 2>;
-			};
-		};
-
-		enet0: ethernet@24000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <0>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x24000 0x1000>;
-			ranges = <0x0 0x24000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <29 2 30 2 34 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi0>;
-			phy-handle = <&phy0>;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-mdio";
-				reg = <0x520 0x20>;
-
-				phy0: ethernet-phy@0 {
-					interrupt-parent = <&mpic>;
-					interrupts = <5 1>;
-					reg = <0x0>;
-				};
-				phy1: ethernet-phy@1 {
-					interrupt-parent = <&mpic>;
-					interrupts = <5 1>;
-					reg = <0x1>;
-				};
-				phy2: ethernet-phy@2 {
-					interrupt-parent = <&mpic>;
-					interrupts = <7 1>;
-					reg = <0x2>;
-				};
-				phy3: ethernet-phy@3 {
-					interrupt-parent = <&mpic>;
-					interrupts = <7 1>;
-					reg = <0x3>;
-				};
-				tbi0: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		enet1: ethernet@25000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			cell-index = <1>;
-			device_type = "network";
-			model = "TSEC";
-			compatible = "gianfar";
-			reg = <0x25000 0x1000>;
-			ranges = <0x0 0x25000 0x1000>;
-			local-mac-address = [ 00 00 00 00 00 00 ];
-			interrupts = <35 2 36 2 40 2>;
-			interrupt-parent = <&mpic>;
-			tbi-handle = <&tbi1>;
-			phy-handle = <&phy1>;
-
-			mdio@520 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,gianfar-tbi";
-				reg = <0x520 0x20>;
-
-				tbi1: tbi-phy@11 {
-					reg = <0x11>;
-					device_type = "tbi-phy";
-				};
-			};
-		};
-
-		mpic: pic@40000 {
-			interrupt-controller;
-			#address-cells = <0>;
-			#interrupt-cells = <2>;
-			reg = <0x40000 0x40000>;
-			compatible = "chrp,open-pic";
-			device_type = "open-pic";
-		};
-
-		cpm@919c0 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "fsl,mpc8560-cpm", "fsl,cpm2";
-			reg = <0x919c0 0x30>;
-			ranges;
-
-			muram@80000 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges = <0x0 0x80000 0x10000>;
-
-				data@0 {
-					compatible = "fsl,cpm-muram-data";
-					reg = <0x0 0x4000 0x9000 0x2000>;
-				};
-			};
-
-			brg@919f0 {
-				compatible = "fsl,mpc8560-brg",
-				             "fsl,cpm2-brg",
-				             "fsl,cpm-brg";
-				reg = <0x919f0 0x10 0x915f0 0x10>;
-				clock-frequency = <165000000>;
-			};
-
-			cpmpic: pic@90c00 {
-				interrupt-controller;
-				#address-cells = <0>;
-				#interrupt-cells = <2>;
-				interrupts = <46 2>;
-				interrupt-parent = <&mpic>;
-				reg = <0x90c00 0x80>;
-				compatible = "fsl,mpc8560-cpm-pic", "fsl,cpm2-pic";
-			};
-
-			serial0: serial@91a00 {
-				device_type = "serial";
-				compatible = "fsl,mpc8560-scc-uart",
-				             "fsl,cpm2-scc-uart";
-				reg = <0x91a00 0x20 0x88000 0x100>;
-				fsl,cpm-brg = <1>;
-				fsl,cpm-command = <0x800000>;
-				current-speed = <115200>;
-				interrupts = <40 8>;
-				interrupt-parent = <&cpmpic>;
-			};
-
-			serial1: serial@91a20 {
-				device_type = "serial";
-				compatible = "fsl,mpc8560-scc-uart",
-				             "fsl,cpm2-scc-uart";
-				reg = <0x91a20 0x20 0x88100 0x100>;
-				fsl,cpm-brg = <2>;
-				fsl,cpm-command = <0x4a00000>;
-				current-speed = <115200>;
-				interrupts = <41 8>;
-				interrupt-parent = <&cpmpic>;
-			};
-
-			enet2: ethernet@91320 {
-				device_type = "network";
-				compatible = "fsl,mpc8560-fcc-enet",
-				             "fsl,cpm2-fcc-enet";
-				reg = <0x91320 0x20 0x88500 0x100 0x913b0 0x1>;
-				local-mac-address = [ 00 00 00 00 00 00 ];
-				fsl,cpm-command = <0x16200300>;
-				interrupts = <33 8>;
-				interrupt-parent = <&cpmpic>;
-				phy-handle = <&phy2>;
-			};
-
-			enet3: ethernet@91340 {
-				device_type = "network";
-				compatible = "fsl,mpc8560-fcc-enet",
-				             "fsl,cpm2-fcc-enet";
-				reg = <0x91340 0x20 0x88600 0x100 0x913d0 0x1>;
-				local-mac-address = [ 00 00 00 00 00 00 ];
-				fsl,cpm-command = <0x1a400300>;
-				interrupts = <34 8>;
-				interrupt-parent = <&cpmpic>;
-				phy-handle = <&phy3>;
-			};
-		};
-	};
-
-	pci0: pci@e0008000 {
-		#interrupt-cells = <1>;
-		#size-cells = <2>;
-		#address-cells = <3>;
-		compatible = "fsl,mpc8540-pcix", "fsl,mpc8540-pci";
-		device_type = "pci";
-		reg = <0xe0008000 0x1000>;
-		clock-frequency = <66666666>;
-		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
-		interrupt-map = <
-
-				/* IDSEL 0x2 */
-				 0x1000 0x0 0x0 0x1 &mpic 0x1 0x1
-				 0x1000 0x0 0x0 0x2 &mpic 0x2 0x1
-				 0x1000 0x0 0x0 0x3 &mpic 0x3 0x1
-				 0x1000 0x0 0x0 0x4 &mpic 0x4 0x1
-
-				/* IDSEL 0x3 */
-				 0x1800 0x0 0x0 0x1 &mpic 0x4 0x1
-				 0x1800 0x0 0x0 0x2 &mpic 0x1 0x1
-				 0x1800 0x0 0x0 0x3 &mpic 0x2 0x1
-				 0x1800 0x0 0x0 0x4 &mpic 0x3 0x1
-
-				/* IDSEL 0x4 */
-				 0x2000 0x0 0x0 0x1 &mpic 0x3 0x1
-				 0x2000 0x0 0x0 0x2 &mpic 0x4 0x1
-				 0x2000 0x0 0x0 0x3 &mpic 0x1 0x1
-				 0x2000 0x0 0x0 0x4 &mpic 0x2 0x1
-
-				/* IDSEL 0x5  */
-				 0x2800 0x0 0x0 0x1 &mpic 0x2 0x1
-				 0x2800 0x0 0x0 0x2 &mpic 0x3 0x1
-				 0x2800 0x0 0x0 0x3 &mpic 0x4 0x1
-				 0x2800 0x0 0x0 0x4 &mpic 0x1 0x1
-
-				/* IDSEL 12 */
-				 0x6000 0x0 0x0 0x1 &mpic 0x1 0x1
-				 0x6000 0x0 0x0 0x2 &mpic 0x2 0x1
-				 0x6000 0x0 0x0 0x3 &mpic 0x3 0x1
-				 0x6000 0x0 0x0 0x4 &mpic 0x4 0x1
-
-				/* IDSEL 13 */
-				 0x6800 0x0 0x0 0x1 &mpic 0x4 0x1
-				 0x6800 0x0 0x0 0x2 &mpic 0x1 0x1
-				 0x6800 0x0 0x0 0x3 &mpic 0x2 0x1
-				 0x6800 0x0 0x0 0x4 &mpic 0x3 0x1
-
-				/* IDSEL 14*/
-				 0x7000 0x0 0x0 0x1 &mpic 0x3 0x1
-				 0x7000 0x0 0x0 0x2 &mpic 0x4 0x1
-				 0x7000 0x0 0x0 0x3 &mpic 0x1 0x1
-				 0x7000 0x0 0x0 0x4 &mpic 0x2 0x1
-
-				/* IDSEL 15 */
-				 0x7800 0x0 0x0 0x1 &mpic 0x2 0x1
-				 0x7800 0x0 0x0 0x2 &mpic 0x3 0x1
-				 0x7800 0x0 0x0 0x3 &mpic 0x4 0x1
-				 0x7800 0x0 0x0 0x4 &mpic 0x1 0x1
-
-				/* IDSEL 18 */
-				 0x9000 0x0 0x0 0x1 &mpic 0x1 0x1
-				 0x9000 0x0 0x0 0x2 &mpic 0x2 0x1
-				 0x9000 0x0 0x0 0x3 &mpic 0x3 0x1
-				 0x9000 0x0 0x0 0x4 &mpic 0x4 0x1
-
-				/* IDSEL 19 */
-				 0x9800 0x0 0x0 0x1 &mpic 0x4 0x1
-				 0x9800 0x0 0x0 0x2 &mpic 0x1 0x1
-				 0x9800 0x0 0x0 0x3 &mpic 0x2 0x1
-				 0x9800 0x0 0x0 0x4 &mpic 0x3 0x1
-
-				/* IDSEL 20 */
-				 0xa000 0x0 0x0 0x1 &mpic 0x3 0x1
-				 0xa000 0x0 0x0 0x2 &mpic 0x4 0x1
-				 0xa000 0x0 0x0 0x3 &mpic 0x1 0x1
-				 0xa000 0x0 0x0 0x4 &mpic 0x2 0x1
-
-				/* IDSEL 21 */
-				 0xa800 0x0 0x0 0x1 &mpic 0x2 0x1
-				 0xa800 0x0 0x0 0x2 &mpic 0x3 0x1
-				 0xa800 0x0 0x0 0x3 &mpic 0x4 0x1
-				 0xa800 0x0 0x0 0x4 &mpic 0x1 0x1>;
-
-		interrupt-parent = <&mpic>;
-		interrupts = <24 2>;
-		bus-range = <0 0>;
-		ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
-			  0x1000000 0x0 0x0 0xe2000000 0x0 0x1000000>;
-	};
-};