Merge tag 'soc-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull SoC devicetree updates from Arnd Bergmann:
 "New SoC support for Broadcom bcm2712 (Raspberry Pi 5) and Renesas
  R9A09G057 (RZ/V2H(P)) and Qualcomm Snapdragon 414 (MSM8929), all three
  of these are variants of already supported chips, in particular the
  last one is almost identical to MSM8939.

  Lots of updates to Mediatek, ASpeed, Rockchips, Amlogic, Qualcomm,
  STM32, NXP i.MX, Sophgo, TI K3, Renesas, Microchip at91, NVIDIA Tegra,
  and T-HEAD.

  The added Qualcomm platform support once again dominates the changes,
  with seven phones and three laptops getting added in addition to many
  new features on existing machines. The Snapdragon X1E support
  specifically keeps improving.

  The other new machines are:

   - eight new machines using various 64-bit Rockchips SoCs, both on the
     consumer/gaming side and developer boards

   - three industrial boards with 64-bit i.MX, which is a very low
     number for them.

   - four more servers using a 32-bit Speed BMC

   - three boards using STM32MP1 SoCs

   - one new machine each using allwinner, amlogic, broadcom and renesas
     chips"

* tag 'soc-dt-6.12' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (672 commits)
  arm64: dts: allwinner: h5: NanoPi NEO Plus2: Use regulators for pio
  arm64: dts: mediatek: add audio support for mt8365-evk
  arm64: dts: mediatek: add afe support for mt8365 SoC
  arm64: dts: mediatek: mt8186-corsola: Disable DPI display interface
  arm64: dts: mediatek: mt8186: Add svs node
  arm64: dts: mediatek: mt8186: Add power domain for DPI
  arm64: dts: mediatek: mt8195: Correct clock order for dp_intf*
  arm64: dts: mt8183: add dpi node to mt8183
  arm64: dts: allwinner: h5: NanoPi Neo Plus2: Fix regulators
  arm64: dts: rockchip: add CAN0 and CAN1 interfaces to mecsbc board
  arm64: dts: rockchip: add CAN-FD controller nodes to rk3568
  arm64: dts: nuvoton: ma35d1: Add uart pinctrl settings
  arm64: dts: nuvoton: ma35d1: Add pinctrl and gpio nodes
  arm64: dts: nuvoton: Add syscon to the system-management node
  ARM: dts: Fix undocumented LM75 compatible nodes
  arm64: dts: toshiba: Fix pl011 and pl022 clocks
  ARM: dts: stm32: Use SAI to generate bit and frame clock on STM32MP15xx DHCOM PDK2
  ARM: dts: stm32: Switch bitclock/frame-master to flag on STM32MP15xx DHCOM PDK2
  ARM: dts: stm32: Sort properties in audio endpoints on STM32MP15xx DHCOM PDK2
  ARM: dts: stm32: Add MECIO1 and MECT1S board variants
  ...

8 files changed, 305 insertions, 62 deletions

diff --git a/arch/riscv/boot/dts/sophgo/cv1812h-huashan-pi.dts b/arch/riscv/boot/dts/sophgo/cv1812h-huashan-pi.dts
index aa361f3a86bb..7b5f57853690 100644
--- a/arch/riscv/boot/dts/sophgo/cv1812h-huashan-pi.dts
+++ b/arch/riscv/boot/dts/sophgo/cv1812h-huashan-pi.dts
@@ -43,6 +43,15 @@
 	clock-frequency = <25000000>;
 };
 
+&sdhci0 {
+	status = "okay";
+	bus-width = <4>;
+	no-1-8-v;
+	no-mmc;
+	no-sdio;
+	disable-wp;
+};
+
 &uart0 {
 	status = "okay";
 };
diff --git a/arch/riscv/boot/dts/sophgo/cv18xx.dtsi b/arch/riscv/boot/dts/sophgo/cv18xx.dtsi
index 891932ae470f..b724fb6d9689 100644
--- a/arch/riscv/boot/dts/sophgo/cv18xx.dtsi
+++ b/arch/riscv/boot/dts/sophgo/cv18xx.dtsi
@@ -297,6 +297,22 @@
 			status = "disabled";
 		};
 
+		dmac: dma-controller@4330000 {
+			compatible = "snps,axi-dma-1.01a";
+			reg = <0x04330000 0x1000>;
+			interrupts = <29 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk CLK_SDMA_AXI>, <&clk CLK_SDMA_AXI>;
+			clock-names = "core-clk", "cfgr-clk";
+			#dma-cells = <1>;
+			dma-channels = <8>;
+			snps,block-size = <1024 1024 1024 1024
+					   1024 1024 1024 1024>;
+			snps,priority = <0 1 2 3 4 5 6 7>;
+			snps,dma-masters = <2>;
+			snps,data-width = <4>;
+			status = "disabled";
+		};
+
 		plic: interrupt-controller@70000000 {
 			reg = <0x70000000 0x4000000>;
 			interrupts-extended = <&cpu0_intc 11>, <&cpu0_intc 9>;
diff --git a/arch/riscv/boot/dts/sophgo/sg2042-milkv-pioneer.dts b/arch/riscv/boot/dts/sophgo/sg2042-milkv-pioneer.dts
index 80cb017974d8..a3f9d6f22566 100644
--- a/arch/riscv/boot/dts/sophgo/sg2042-milkv-pioneer.dts
+++ b/arch/riscv/boot/dts/sophgo/sg2042-milkv-pioneer.dts
@@ -26,6 +26,83 @@
 	clock-frequency = <25000000>;
 };
 
+&emmc {
+	bus-width = <4>;
+	no-sdio;
+	no-sd;
+	non-removable;
+	wp-inverted;
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	mcu: syscon@17 {
+		compatible = "sophgo,sg2042-hwmon-mcu";
+		reg = <0x17>;
+		#thermal-sensor-cells = <1>;
+	};
+};
+
+&sd {
+	bus-width = <4>;
+	no-sdio;
+	no-mmc;
+	wp-inverted;
+	status = "okay";
+};
+
 &uart0 {
 	status = "okay";
 };
+
+/ {
+	thermal-zones {
+		soc-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <1000>;
+			thermal-sensors = <&mcu 0>;
+
+			trips {
+				soc_active1: soc-active1 {
+					temperature = <30000>;
+					hysteresis = <8000>;
+					type = "active";
+				};
+
+				soc_active2: soc-active2 {
+					temperature = <58000>;
+					hysteresis = <12000>;
+					type = "active";
+				};
+
+				soc_active3: soc-active3 {
+					temperature = <70000>;
+					hysteresis = <10000>;
+					type = "active";
+				};
+
+				soc_hot: soc-hot {
+					temperature = <80000>;
+					hysteresis = <5000>;
+					type = "hot";
+				};
+			};
+		};
+
+		board-thermal {
+			polling-delay-passive = <1000>;
+			polling-delay = <1000>;
+			thermal-sensors = <&mcu 1>;
+
+			trips {
+				board_active: board-active {
+					temperature = <75000>;
+					hysteresis = <8000>;
+					type = "active";
+				};
+			};
+		};
+	};
+};
diff --git a/arch/riscv/boot/dts/sophgo/sg2042.dtsi b/arch/riscv/boot/dts/sophgo/sg2042.dtsi
index 34c802bd3f9b..4e5fa6591623 100644
--- a/arch/riscv/boot/dts/sophgo/sg2042.dtsi
+++ b/arch/riscv/boot/dts/sophgo/sg2042.dtsi
@@ -44,8 +44,127 @@
 		compatible = "simple-bus";
 		#address-cells = <2>;
 		#size-cells = <2>;
+		interrupt-parent = <&intc>;
 		ranges;
 
+		i2c0: i2c@7030005000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x70 0x30005000 0x0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clkgen GATE_CLK_APB_I2C>;
+			clock-names = "ref";
+			clock-frequency = <100000>;
+			interrupts = <101 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rstgen RST_I2C0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@7030006000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x70 0x30006000 0x0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clkgen GATE_CLK_APB_I2C>;
+			clock-names = "ref";
+			clock-frequency = <100000>;
+			interrupts = <102 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rstgen RST_I2C1>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@7030007000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x70 0x30007000 0x0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clkgen GATE_CLK_APB_I2C>;
+			clock-names = "ref";
+			clock-frequency = <100000>;
+			interrupts = <103 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rstgen RST_I2C2>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@7030008000 {
+			compatible = "snps,designware-i2c";
+			reg = <0x70 0x30008000 0x0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clkgen GATE_CLK_APB_I2C>;
+			clock-names = "ref";
+			clock-frequency = <100000>;
+			interrupts = <104 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&rstgen RST_I2C3>;
+			status = "disabled";
+		};
+
+		gpio0: gpio@7030009000 {
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x70 0x30009000 0x0 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clkgen GATE_CLK_APB_GPIO>,
+				 <&clkgen GATE_CLK_GPIO_DB>;
+			clock-names = "bus", "db";
+
+			port0a: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <32>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupt-parent = <&intc>;
+				interrupts = <96 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		gpio1: gpio@703000a000 {
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x70 0x3000a000 0x0 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clkgen GATE_CLK_APB_GPIO>,
+				 <&clkgen GATE_CLK_GPIO_DB>;
+			clock-names = "bus", "db";
+
+			port1a: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <32>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupt-parent = <&intc>;
+				interrupts = <97 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		gpio2: gpio@703000b000 {
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x70 0x3000b000 0x0 0x400>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			clocks = <&clkgen GATE_CLK_APB_GPIO>,
+				 <&clkgen GATE_CLK_GPIO_DB>;
+			clock-names = "bus", "db";
+
+			port2a: gpio-controller@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				gpio-controller;
+				#gpio-cells = <2>;
+				snps,nr-gpios = <32>;
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupt-parent = <&intc>;
+				interrupts = <98 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
 		pllclk: clock-controller@70300100c0 {
 			compatible = "sophgo,sg2042-pll";
 			reg = <0x70 0x300100c0 0x0 0x40>;
@@ -388,7 +507,6 @@
 		uart0: serial@7040000000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x00000070 0x40000000 0x00000000 0x00001000>;
-			interrupt-parent = <&intc>;
 			interrupts = <112 IRQ_TYPE_LEVEL_HIGH>;
 			clock-frequency = <500000000>;
 			clocks = <&clkgen GATE_CLK_UART_500M>,
@@ -399,5 +517,33 @@
 			resets = <&rstgen RST_UART0>;
 			status = "disabled";
 		};
+
+		emmc: mmc@704002a000 {
+			compatible = "sophgo,sg2042-dwcmshc";
+			reg = <0x70 0x4002a000 0x0 0x1000>;
+			interrupt-parent = <&intc>;
+			interrupts = <134 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkgen GATE_CLK_EMMC_100M>,
+				 <&clkgen GATE_CLK_AXI_EMMC>,
+				 <&clkgen GATE_CLK_100K_EMMC>;
+			clock-names = "core",
+				      "bus",
+				      "timer";
+			status = "disabled";
+		};
+
+		sd: mmc@704002b000 {
+			compatible = "sophgo,sg2042-dwcmshc";
+			reg = <0x70 0x4002b000 0x0 0x1000>;
+			interrupt-parent = <&intc>;
+			interrupts = <136 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clkgen GATE_CLK_SD_100M>,
+				 <&clkgen GATE_CLK_AXI_SD>,
+				 <&clkgen GATE_CLK_100K_SD>;
+			clock-names = "core",
+				      "bus",
+				      "timer";
+			status = "disabled";
+		};
 	};
 };
diff --git a/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts b/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts
index d9b4de9e4757..497d961456f3 100644
--- a/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts
+++ b/arch/riscv/boot/dts/thead/th1520-beaglev-ahead.dts
@@ -23,6 +23,7 @@
 		serial3 = &uart3;
 		serial4 = &uart4;
 		serial5 = &uart5;
+		spi0 = &spi0;
 	};
 
 	chosen {
@@ -44,18 +45,6 @@
 	clock-frequency = <32768>;
 };
 
-&apb_clk {
-	clock-frequency = <62500000>;
-};
-
-&sdhci_clk {
-	clock-frequency = <198000000>;
-};
-
-&uart_sclk {
-	clock-frequency = <100000000>;
-};
-
 &dmac0 {
 	status = "okay";
 };
@@ -79,3 +68,7 @@
 &uart0 {
 	status = "okay";
 };
+
+&spi0 {
+	status = "okay";
+};
diff --git a/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi b/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi
index 1365d3a512a3..78977bdbbe3d 100644
--- a/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi
+++ b/arch/riscv/boot/dts/thead/th1520-lichee-module-4a.dtsi
@@ -25,18 +25,6 @@
 	clock-frequency = <32768>;
 };
 
-&apb_clk {
-	clock-frequency = <62500000>;
-};
-
-&sdhci_clk {
-	clock-frequency = <198000000>;
-};
-
-&uart_sclk {
-	clock-frequency = <100000000>;
-};
-
 &dmac0 {
 	status = "okay";
 };
diff --git a/arch/riscv/boot/dts/thead/th1520-lichee-pi-4a.dts b/arch/riscv/boot/dts/thead/th1520-lichee-pi-4a.dts
index 9a3884a73e13..7738d2895c5a 100644
--- a/arch/riscv/boot/dts/thead/th1520-lichee-pi-4a.dts
+++ b/arch/riscv/boot/dts/thead/th1520-lichee-pi-4a.dts
@@ -20,6 +20,7 @@
 		serial3 = &uart3;
 		serial4 = &uart4;
 		serial5 = &uart5;
+		spi0 = &spi0;
 	};
 
 	chosen {
@@ -30,3 +31,7 @@
 &uart0 {
 	status = "okay";
 };
+
+&spi0 {
+	status = "okay";
+};
diff --git a/arch/riscv/boot/dts/thead/th1520.dtsi b/arch/riscv/boot/dts/thead/th1520.dtsi
index 3c9974062c20..6992060e6a54 100644
--- a/arch/riscv/boot/dts/thead/th1520.dtsi
+++ b/arch/riscv/boot/dts/thead/th1520.dtsi
@@ -5,6 +5,7 @@
  */
 
 #include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/thead,th1520-clk-ap.h>
 
 / {
 	compatible = "thead,th1520";
@@ -215,25 +216,6 @@
 		#clock-cells = <0>;
 	};
 
-	apb_clk: apb-clk-clock {
-		compatible = "fixed-clock";
-		clock-output-names = "apb_clk";
-		#clock-cells = <0>;
-	};
-
-	uart_sclk: uart-sclk-clock {
-		compatible = "fixed-clock";
-		clock-output-names = "uart_sclk";
-		#clock-cells = <0>;
-	};
-
-	sdhci_clk: sdhci-clock {
-		compatible = "fixed-clock";
-		clock-frequency = <198000000>;
-		clock-output-names = "sdhci_clk";
-		#clock-cells = <0>;
-	};
-
 	soc {
 		compatible = "simple-bus";
 		interrupt-parent = <&plic>;
@@ -264,11 +246,22 @@
 					      <&cpu3_intc 3>, <&cpu3_intc 7>;
 		};
 
+		spi0: spi@ffe700c000 {
+			compatible = "thead,th1520-spi", "snps,dw-apb-ssi";
+			reg = <0xff 0xe700c000 0x0 0x1000>;
+			interrupts = <54 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk CLK_SPI>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		uart0: serial@ffe7014000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0xff 0xe7014000 0x0 0x100>;
 			interrupts = <36 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&uart_sclk>;
+			clocks = <&clk CLK_UART_SCLK>, <&clk CLK_UART0_PCLK>;
+			clock-names = "baudclk", "apb_pclk";
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			status = "disabled";
@@ -278,7 +271,7 @@
 			compatible = "thead,th1520-dwcmshc";
 			reg = <0xff 0xe7080000 0x0 0x10000>;
 			interrupts = <62 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&sdhci_clk>;
+			clocks = <&clk CLK_EMMC_SDIO>;
 			clock-names = "core";
 			status = "disabled";
 		};
@@ -287,7 +280,7 @@
 			compatible = "thead,th1520-dwcmshc";
 			reg = <0xff 0xe7090000 0x0 0x10000>;
 			interrupts = <64 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&sdhci_clk>;
+			clocks = <&clk CLK_EMMC_SDIO>;
 			clock-names = "core";
 			status = "disabled";
 		};
@@ -296,7 +289,7 @@
 			compatible = "thead,th1520-dwcmshc";
 			reg = <0xff 0xe70a0000 0x0 0x10000>;
 			interrupts = <71 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&sdhci_clk>;
+			clocks = <&clk CLK_EMMC_SDIO>;
 			clock-names = "core";
 			status = "disabled";
 		};
@@ -305,7 +298,8 @@
 			compatible = "snps,dw-apb-uart";
 			reg = <0xff 0xe7f00000 0x0 0x100>;
 			interrupts = <37 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&uart_sclk>;
+			clocks = <&clk CLK_UART_SCLK>, <&clk CLK_UART1_PCLK>;
+			clock-names = "baudclk", "apb_pclk";
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			status = "disabled";
@@ -315,7 +309,8 @@
 			compatible = "snps,dw-apb-uart";
 			reg = <0xff 0xe7f04000 0x0 0x100>;
 			interrupts = <39 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&uart_sclk>;
+			clocks = <&clk CLK_UART_SCLK>, <&clk CLK_UART3_PCLK>;
+			clock-names = "baudclk", "apb_pclk";
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			status = "disabled";
@@ -326,6 +321,7 @@
 			reg = <0xff 0xe7f34000 0x0 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			clocks = <&clk CLK_GPIO2>;
 
 			portc: gpio-controller@0 {
 				compatible = "snps,dw-apb-gpio-port";
@@ -344,6 +340,7 @@
 			reg = <0xff 0xe7f38000 0x0 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			clocks = <&clk CLK_GPIO3>;
 
 			portd: gpio-controller@0 {
 				compatible = "snps,dw-apb-gpio-port";
@@ -362,6 +359,7 @@
 			reg = <0xff 0xec005000 0x0 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			clocks = <&clk CLK_GPIO0>;
 
 			porta: gpio-controller@0 {
 				compatible = "snps,dw-apb-gpio-port";
@@ -380,6 +378,7 @@
 			reg = <0xff 0xec006000 0x0 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <0>;
+			clocks = <&clk CLK_GPIO1>;
 
 			portb: gpio-controller@0 {
 				compatible = "snps,dw-apb-gpio-port";
@@ -397,17 +396,25 @@
 			compatible = "snps,dw-apb-uart";
 			reg = <0xff 0xec010000 0x0 0x4000>;
 			interrupts = <38 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&uart_sclk>;
+			clocks = <&clk CLK_UART_SCLK>, <&clk CLK_UART2_PCLK>;
+			clock-names = "baudclk", "apb_pclk";
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			status = "disabled";
 		};
 
+		clk: clock-controller@ffef010000 {
+			compatible = "thead,th1520-clk-ap";
+			reg = <0xff 0xef010000 0x0 0x1000>;
+			clocks = <&osc>;
+			#clock-cells = <1>;
+		};
+
 		dmac0: dma-controller@ffefc00000 {
 			compatible = "snps,axi-dma-1.01a";
 			reg = <0xff 0xefc00000 0x0 0x1000>;
 			interrupts = <27 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&apb_clk>, <&apb_clk>;
+			clocks = <&clk CLK_PERI_APB_PCLK>, <&clk CLK_PERI_APB_PCLK>;
 			clock-names = "core-clk", "cfgr-clk";
 			#dma-cells = <1>;
 			dma-channels = <4>;
@@ -422,7 +429,7 @@
 		timer0: timer@ffefc32000 {
 			compatible = "snps,dw-apb-timer";
 			reg = <0xff 0xefc32000 0x0 0x14>;
-			clocks = <&apb_clk>;
+			clocks = <&clk CLK_PERI_APB_PCLK>;
 			clock-names = "timer";
 			interrupts = <16 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
@@ -431,7 +438,7 @@
 		timer1: timer@ffefc32014 {
 			compatible = "snps,dw-apb-timer";
 			reg = <0xff 0xefc32014 0x0 0x14>;
-			clocks = <&apb_clk>;
+			clocks = <&clk CLK_PERI_APB_PCLK>;
 			clock-names = "timer";
 			interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
@@ -440,7 +447,7 @@
 		timer2: timer@ffefc32028 {
 			compatible = "snps,dw-apb-timer";
 			reg = <0xff 0xefc32028 0x0 0x14>;
-			clocks = <&apb_clk>;
+			clocks = <&clk CLK_PERI_APB_PCLK>;
 			clock-names = "timer";
 			interrupts = <18 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
@@ -449,7 +456,7 @@
 		timer3: timer@ffefc3203c {
 			compatible = "snps,dw-apb-timer";
 			reg = <0xff 0xefc3203c 0x0 0x14>;
-			clocks = <&apb_clk>;
+			clocks = <&clk CLK_PERI_APB_PCLK>;
 			clock-names = "timer";
 			interrupts = <19 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
@@ -459,7 +466,8 @@
 			compatible = "snps,dw-apb-uart";
 			reg = <0xff 0xf7f08000 0x0 0x4000>;
 			interrupts = <40 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&uart_sclk>;
+			clocks = <&clk CLK_UART_SCLK>, <&clk CLK_UART4_PCLK>;
+			clock-names = "baudclk", "apb_pclk";
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			status = "disabled";
@@ -469,7 +477,8 @@
 			compatible = "snps,dw-apb-uart";
 			reg = <0xff 0xf7f0c000 0x0 0x4000>;
 			interrupts = <41 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&uart_sclk>;
+			clocks = <&clk CLK_UART_SCLK>, <&clk CLK_UART5_PCLK>;
+			clock-names = "baudclk", "apb_pclk";
 			reg-shift = <2>;
 			reg-io-width = <4>;
 			status = "disabled";
@@ -478,7 +487,7 @@
 		timer4: timer@ffffc33000 {
 			compatible = "snps,dw-apb-timer";
 			reg = <0xff 0xffc33000 0x0 0x14>;
-			clocks = <&apb_clk>;
+			clocks = <&clk CLK_PERI_APB_PCLK>;
 			clock-names = "timer";
 			interrupts = <20 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
@@ -487,7 +496,7 @@
 		timer5: timer@ffffc33014 {
 			compatible = "snps,dw-apb-timer";
 			reg = <0xff 0xffc33014 0x0 0x14>;
-			clocks = <&apb_clk>;
+			clocks = <&clk CLK_PERI_APB_PCLK>;
 			clock-names = "timer";
 			interrupts = <21 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
@@ -496,7 +505,7 @@
 		timer6: timer@ffffc33028 {
 			compatible = "snps,dw-apb-timer";
 			reg = <0xff 0xffc33028 0x0 0x14>;
-			clocks = <&apb_clk>;
+			clocks = <&clk CLK_PERI_APB_PCLK>;
 			clock-names = "timer";
 			interrupts = <22 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";
@@ -505,7 +514,7 @@
 		timer7: timer@ffffc3303c {
 			compatible = "snps,dw-apb-timer";
 			reg = <0xff 0xffc3303c 0x0 0x14>;
-			clocks = <&apb_clk>;
+			clocks = <&clk CLK_PERI_APB_PCLK>;
 			clock-names = "timer";
 			interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
 			status = "disabled";