Merge tag 'riscv-for-linus-5.19-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux

Pull more RISC-V updates from Palmer Dabbelt:
 "This is mostly some DT updates, but also a handful of cleanups and
  some fixes. The most user-visible of those are:

   - A device tree for the Sundance Polarberry, along with a handful of
     fixes and clenups to the PolarFire SOC device trees and bindings.

   - The memfd_secret syscall number is now visible to userspace,

   - Some improvements to the vm layout dump, which really should have
     followed shortly after the sv48 patches but I missed"

* tag 'riscv-for-linus-5.19-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: Move alternative length validation into subsection
  riscv: mm: init: make pt_ops_set_[early|late|fixmap] static
  riscv: move errata/ and kvm/ builds to arch/riscv/Kbuild
  RISC-V: Mark IORESOURCE_EXCLUSIVE for reserved mem instead of IORESOURCE_BUSY
  riscv: Wire up memfd_secret in UAPI header
  riscv: Fix irq_work when SMP is disabled
  riscv: Improve virtual kernel memory layout dump
  riscv: Initialize thread pointer before calling C functions
  Documentation: riscv: Add sv48 description to VM layout
  RISC-V: Only default to spinwait on SBI-0.1 and M-mode
  riscv: dts: icicle: sort nodes alphabetically
  riscv: microchip: icicle: readability fixes
  riscv: dts: microchip: add the sundance polarberry
  dt-bindings: riscv: microchip: add polarberry compatible string
  dt-bindings: vendor-prefixes: add Sundance DSP
  riscv: dts: microchip: make the fabric dtsi board specific
  dt-bindings: riscv: microchip: document icicle reference design
  riscv: dts: microchip: remove soc vendor from filenames
  riscv: dts: microchip: move sysctrlr out of soc bus
  riscv: dts: microchip: remove icicle memory clocks

1 files changed, 54 insertions, 18 deletions

diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c
index eed613599ba6..d466ec670e1f 100644
--- a/arch/riscv/mm/init.c
+++ b/arch/riscv/mm/init.c
@@ -76,38 +76,74 @@ static void __init zone_sizes_init(void)
 }
 
 #if defined(CONFIG_MMU) && defined(CONFIG_DEBUG_VM)
+
+#define LOG2_SZ_1K  ilog2(SZ_1K)
+#define LOG2_SZ_1M  ilog2(SZ_1M)
+#define LOG2_SZ_1G  ilog2(SZ_1G)
+#define LOG2_SZ_1T  ilog2(SZ_1T)
+
 static inline void print_mlk(char *name, unsigned long b, unsigned long t)
 {
 	pr_notice("%12s : 0x%08lx - 0x%08lx   (%4ld kB)\n", name, b, t,
-		  (((t) - (b)) >> 10));
+		  (((t) - (b)) >> LOG2_SZ_1K));
 }
 
 static inline void print_mlm(char *name, unsigned long b, unsigned long t)
 {
 	pr_notice("%12s : 0x%08lx - 0x%08lx   (%4ld MB)\n", name, b, t,
-		  (((t) - (b)) >> 20));
+		  (((t) - (b)) >> LOG2_SZ_1M));
+}
+
+static inline void print_mlg(char *name, unsigned long b, unsigned long t)
+{
+	pr_notice("%12s : 0x%08lx - 0x%08lx   (%4ld GB)\n", name, b, t,
+		   (((t) - (b)) >> LOG2_SZ_1G));
+}
+
+#ifdef CONFIG_64BIT
+static inline void print_mlt(char *name, unsigned long b, unsigned long t)
+{
+	pr_notice("%12s : 0x%08lx - 0x%08lx   (%4ld TB)\n", name, b, t,
+		   (((t) - (b)) >> LOG2_SZ_1T));
+}
+#else
+#define print_mlt(n, b, t) do {} while (0)
+#endif
+
+static inline void print_ml(char *name, unsigned long b, unsigned long t)
+{
+	unsigned long diff = t - b;
+
+	if (IS_ENABLED(CONFIG_64BIT) && (diff >> LOG2_SZ_1T) >= 10)
+		print_mlt(name, b, t);
+	else if ((diff >> LOG2_SZ_1G) >= 10)
+		print_mlg(name, b, t);
+	else if ((diff >> LOG2_SZ_1M) >= 10)
+		print_mlm(name, b, t);
+	else
+		print_mlk(name, b, t);
 }
 
 static void __init print_vm_layout(void)
 {
 	pr_notice("Virtual kernel memory layout:\n");
-	print_mlk("fixmap", (unsigned long)FIXADDR_START,
-		  (unsigned long)FIXADDR_TOP);
-	print_mlm("pci io", (unsigned long)PCI_IO_START,
-		  (unsigned long)PCI_IO_END);
-	print_mlm("vmemmap", (unsigned long)VMEMMAP_START,
-		  (unsigned long)VMEMMAP_END);
-	print_mlm("vmalloc", (unsigned long)VMALLOC_START,
-		  (unsigned long)VMALLOC_END);
-	print_mlm("lowmem", (unsigned long)PAGE_OFFSET,
-		  (unsigned long)high_memory);
+	print_ml("fixmap", (unsigned long)FIXADDR_START,
+		(unsigned long)FIXADDR_TOP);
+	print_ml("pci io", (unsigned long)PCI_IO_START,
+		(unsigned long)PCI_IO_END);
+	print_ml("vmemmap", (unsigned long)VMEMMAP_START,
+		(unsigned long)VMEMMAP_END);
+	print_ml("vmalloc", (unsigned long)VMALLOC_START,
+		(unsigned long)VMALLOC_END);
+	print_ml("lowmem", (unsigned long)PAGE_OFFSET,
+		(unsigned long)high_memory);
 	if (IS_ENABLED(CONFIG_64BIT)) {
 #ifdef CONFIG_KASAN
-		print_mlm("kasan", KASAN_SHADOW_START, KASAN_SHADOW_END);
+		print_ml("kasan", KASAN_SHADOW_START, KASAN_SHADOW_END);
 #endif
 
-		print_mlm("kernel", (unsigned long)KERNEL_LINK_ADDR,
-			  (unsigned long)ADDRESS_SPACE_END);
+		print_ml("kernel", (unsigned long)KERNEL_LINK_ADDR,
+			 (unsigned long)ADDRESS_SPACE_END);
 	}
 }
 #else
@@ -843,7 +879,7 @@ static void __init create_fdt_early_page_table(pgd_t *pgdir, uintptr_t dtb_pa)
  * MMU is not enabled, the page tables are allocated directly using
  * early_pmd/pud/p4d and the address returned is the physical one.
  */
-void __init pt_ops_set_early(void)
+static void __init pt_ops_set_early(void)
 {
 	pt_ops.alloc_pte = alloc_pte_early;
 	pt_ops.get_pte_virt = get_pte_virt_early;
@@ -865,7 +901,7 @@ void __init pt_ops_set_early(void)
  * Note that this is called with MMU disabled, hence kernel_mapping_pa_to_va,
  * but it will be used as described above.
  */
-void __init pt_ops_set_fixmap(void)
+static void __init pt_ops_set_fixmap(void)
 {
 	pt_ops.alloc_pte = kernel_mapping_pa_to_va((uintptr_t)alloc_pte_fixmap);
 	pt_ops.get_pte_virt = kernel_mapping_pa_to_va((uintptr_t)get_pte_virt_fixmap);
@@ -883,7 +919,7 @@ void __init pt_ops_set_fixmap(void)
  * MMU is enabled and page table setup is complete, so from now, we can use
  * generic page allocation functions to setup page table.
  */
-void __init pt_ops_set_late(void)
+static void __init pt_ops_set_late(void)
 {
 	pt_ops.alloc_pte = alloc_pte_late;
 	pt_ops.get_pte_virt = get_pte_virt_late;