Merge tag 'x86_urgent_for_v5.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 fixes from Borislav Petkov:
 "A bunch of x86/urgent stuff accumulated for the last two weeks so
  lemme unload it to you.

  It should be all totally risk-free, of course. :-)

   - Fix out-of-spec hardware (1st gen Hygon) which does not implement
     MSR_AMD64_SEV even though the spec clearly states so, and check
     CPUID bits first.

   - Send only one signal to a task when it is a SEGV_PKUERR si_code
     type.

   - Do away with all the wankery of reserving X amount of memory in the
     first megabyte to prevent BIOS corrupting it and simply and
     unconditionally reserve the whole first megabyte.

   - Make alternatives NOP optimization work at an arbitrary position
     within the patched sequence because the compiler can put
     single-byte NOPs for alignment anywhere in the sequence (32-bit
     retpoline), vs our previous assumption that the NOPs are only
     appended.

   - Force-disable ENQCMD[S] instructions support and remove
     update_pasid() because of insufficient protection against FPU state
     modification in an interrupt context, among other xstate horrors
     which are being addressed at the moment. This one limits the
     fallout until proper enablement.

   - Use cpu_feature_enabled() in the idxd driver so that it can be
     build-time disabled through the defines in disabled-features.h.

   - Fix LVT thermal setup for SMI delivery mode by making sure the APIC
     LVT value is read before APIC initialization so that softlockups
     during boot do not happen at least on one machine.

   - Mark all legacy interrupts as legacy vectors when the IO-APIC is
     disabled and when all legacy interrupts are routed through the PIC"

* tag 'x86_urgent_for_v5.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/sev: Check SME/SEV support in CPUID first
  x86/fault: Don't send SIGSEGV twice on SEGV_PKUERR
  x86/setup: Always reserve the first 1M of RAM
  x86/alternative: Optimize single-byte NOPs at an arbitrary position
  x86/cpufeatures: Force disable X86_FEATURE_ENQCMD and remove update_pasid()
  dmaengine: idxd: Use cpu_feature_enabled()
  x86/thermal: Fix LVT thermal setup for SMI delivery mode
  x86/apic: Mark _all_ legacy interrupts when IO/APIC is missing

1 files changed, 46 insertions, 18 deletions

diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c
index 6974b5174495..6fe5b44fcbc9 100644
--- a/arch/x86/kernel/alternative.c
+++ b/arch/x86/kernel/alternative.c
@@ -183,41 +183,69 @@ done:
 }
 
 /*
+ * optimize_nops_range() - Optimize a sequence of single byte NOPs (0x90)
+ *
+ * @instr: instruction byte stream
+ * @instrlen: length of the above
+ * @off: offset within @instr where the first NOP has been detected
+ *
+ * Return: number of NOPs found (and replaced).
+ */
+static __always_inline int optimize_nops_range(u8 *instr, u8 instrlen, int off)
+{
+	unsigned long flags;
+	int i = off, nnops;
+
+	while (i < instrlen) {
+		if (instr[i] != 0x90)
+			break;
+
+		i++;
+	}
+
+	nnops = i - off;
+
+	if (nnops <= 1)
+		return nnops;
+
+	local_irq_save(flags);
+	add_nops(instr + off, nnops);
+	local_irq_restore(flags);
+
+	DUMP_BYTES(instr, instrlen, "%px: [%d:%d) optimized NOPs: ", instr, off, i);
+
+	return nnops;
+}
+
+/*
  * "noinline" to cause control flow change and thus invalidate I$ and
  * cause refetch after modification.
  */
 static void __init_or_module noinline optimize_nops(struct alt_instr *a, u8 *instr)
 {
-	unsigned long flags;
 	struct insn insn;
-	int nop, i = 0;
+	int i = 0;
 
 	/*
-	 * Jump over the non-NOP insns, the remaining bytes must be single-byte
-	 * NOPs, optimize them.
+	 * Jump over the non-NOP insns and optimize single-byte NOPs into bigger
+	 * ones.
 	 */
 	for (;;) {
 		if (insn_decode_kernel(&insn, &instr[i]))
 			return;
 
+		/*
+		 * See if this and any potentially following NOPs can be
+		 * optimized.
+		 */
 		if (insn.length == 1 && insn.opcode.bytes[0] == 0x90)
-			break;
-
-		if ((i += insn.length) >= a->instrlen)
-			return;
-	}
+			i += optimize_nops_range(instr, a->instrlen, i);
+		else
+			i += insn.length;
 
-	for (nop = i; i < a->instrlen; i++) {
-		if (WARN_ONCE(instr[i] != 0x90, "Not a NOP at 0x%px\n", &instr[i]))
+		if (i >= a->instrlen)
 			return;
 	}
-
-	local_irq_save(flags);
-	add_nops(instr + nop, i - nop);
-	local_irq_restore(flags);
-
-	DUMP_BYTES(instr, a->instrlen, "%px: [%d:%d) optimized NOPs: ",
-		   instr, nop, a->instrlen);
 }
 
 /*