summaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
authorRussell King <rmk+kernel@armlinux.org.uk>2020-12-21 11:19:26 +0000
committerRussell King <rmk+kernel@armlinux.org.uk>2020-12-21 11:19:26 +0000
commitecbbb88727aee7880527d4b320b4d06dde75d46d (patch)
tree67216fc12f1b8220039eed892403bfbde884a1a7 /arch
parent8cc9251737d1883e33fd0a7dafbd4062916c1ca6 (diff)
parent2c736bb4087f2cb949cbbaf4148733131b8466dc (diff)
Merge branch 'devel-stable' into for-next
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/Kconfig2
-rw-r--r--arch/arm/boot/compressed/head.S18
-rw-r--r--arch/arm/include/asm/assembler.h88
-rw-r--r--arch/arm/include/asm/elf.h5
-rw-r--r--arch/arm/include/asm/memory.h57
-rw-r--r--arch/arm/include/asm/processor.h2
-rw-r--r--arch/arm/kernel/Makefile1
-rw-r--r--arch/arm/kernel/head-common.S22
-rw-r--r--arch/arm/kernel/head.S205
-rw-r--r--arch/arm/kernel/hyp-stub.S27
-rw-r--r--arch/arm/kernel/module.c20
-rw-r--r--arch/arm/kernel/phys2virt.S238
-rw-r--r--arch/arm/kernel/sleep.S19
13 files changed, 431 insertions, 273 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index 2c5eb5c2b310..b2bf019dcefa 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -244,7 +244,7 @@ config ARM_PATCH_PHYS_VIRT
kernel in system memory.
This can only be used with non-XIP MMU kernels where the base
- of physical memory is at a 16MB boundary.
+ of physical memory is at a 2 MiB boundary.
Only disable this option if you know that you do not require
this feature (eg, building a kernel for a single machine) and
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index 8d546cb10921..804d66668019 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -468,15 +468,10 @@ dtb_check_done:
/*
* Compute the address of the hyp vectors after relocation.
- * This requires some arithmetic since we cannot directly
- * reference __hyp_stub_vectors in a PC-relative way.
* Call __hyp_set_vectors with the new address so that we
* can HVC again after the copy.
*/
-0: adr r0, 0b
- movw r1, #:lower16:__hyp_stub_vectors - 0b
- movt r1, #:upper16:__hyp_stub_vectors - 0b
- add r0, r0, r1
+ adr_l r0, __hyp_stub_vectors
sub r0, r0, r5
add r0, r0, r10
bl __hyp_set_vectors
@@ -627,17 +622,11 @@ not_relocated: mov r0, #0
cmp r0, #HYP_MODE @ if not booted in HYP mode...
bne __enter_kernel @ boot kernel directly
- adr r12, .L__hyp_reentry_vectors_offset
- ldr r0, [r12]
- add r0, r0, r12
-
+ adr_l r0, __hyp_reentry_vectors
bl __hyp_set_vectors
__HVC(0) @ otherwise bounce to hyp mode
b . @ should never be reached
-
- .align 2
-.L__hyp_reentry_vectors_offset: .long __hyp_reentry_vectors - .
#else
b __enter_kernel
#endif
@@ -1440,8 +1429,7 @@ ENTRY(efi_enter_kernel)
mov r4, r0 @ preserve image base
mov r8, r1 @ preserve DT pointer
- ARM( adrl r0, call_cache_fn )
- THUMB( adr r0, call_cache_fn )
+ adr_l r0, call_cache_fn
adr r1, 0f @ clean the region of code we
bl cache_clean_flush @ may run with the MMU off
diff --git a/arch/arm/include/asm/assembler.h b/arch/arm/include/asm/assembler.h
index feac2c8b86f2..6ed30421f697 100644
--- a/arch/arm/include/asm/assembler.h
+++ b/arch/arm/include/asm/assembler.h
@@ -259,7 +259,7 @@
*/
#define ALT_UP(instr...) \
.pushsection ".alt.smp.init", "a" ;\
- .long 9998b ;\
+ .long 9998b - . ;\
9997: instr ;\
.if . - 9997b == 2 ;\
nop ;\
@@ -270,7 +270,7 @@
.popsection
#define ALT_UP_B(label) \
.pushsection ".alt.smp.init", "a" ;\
- .long 9998b ;\
+ .long 9998b - . ;\
W(b) . + (label - 9998b) ;\
.popsection
#else
@@ -494,4 +494,88 @@ THUMB( orr \reg , \reg , #PSR_T_BIT )
#define _ASM_NOKPROBE(entry)
#endif
+ .macro __adldst_l, op, reg, sym, tmp, c
+ .if __LINUX_ARM_ARCH__ < 7
+ ldr\c \tmp, .La\@
+ .subsection 1
+ .align 2
+.La\@: .long \sym - .Lpc\@
+ .previous
+ .else
+ .ifnb \c
+ THUMB( ittt \c )
+ .endif
+ movw\c \tmp, #:lower16:\sym - .Lpc\@
+ movt\c \tmp, #:upper16:\sym - .Lpc\@
+ .endif
+
+#ifndef CONFIG_THUMB2_KERNEL
+ .set .Lpc\@, . + 8 // PC bias
+ .ifc \op, add
+ add\c \reg, \tmp, pc
+ .else
+ \op\c \reg, [pc, \tmp]
+ .endif
+#else
+.Lb\@: add\c \tmp, \tmp, pc
+ /*
+ * In Thumb-2 builds, the PC bias depends on whether we are currently
+ * emitting into a .arm or a .thumb section. The size of the add opcode
+ * above will be 2 bytes when emitting in Thumb mode and 4 bytes when
+ * emitting in ARM mode, so let's use this to account for the bias.
+ */
+ .set .Lpc\@, . + (. - .Lb\@)
+
+ .ifnc \op, add
+ \op\c \reg, [\tmp]
+ .endif
+#endif
+ .endm
+
+ /*
+ * mov_l - move a constant value or [relocated] address into a register
+ */
+ .macro mov_l, dst:req, imm:req
+ .if __LINUX_ARM_ARCH__ < 7
+ ldr \dst, =\imm
+ .else
+ movw \dst, #:lower16:\imm
+ movt \dst, #:upper16:\imm
+ .endif
+ .endm
+
+ /*
+ * adr_l - adr pseudo-op with unlimited range
+ *
+ * @dst: destination register
+ * @sym: name of the symbol
+ * @cond: conditional opcode suffix
+ */
+ .macro adr_l, dst:req, sym:req, cond
+ __adldst_l add, \dst, \sym, \dst, \cond
+ .endm
+
+ /*
+ * ldr_l - ldr <literal> pseudo-op with unlimited range
+ *
+ * @dst: destination register
+ * @sym: name of the symbol
+ * @cond: conditional opcode suffix
+ */
+ .macro ldr_l, dst:req, sym:req, cond
+ __adldst_l ldr, \dst, \sym, \dst, \cond
+ .endm
+
+ /*
+ * str_l - str <literal> pseudo-op with unlimited range
+ *
+ * @src: source register
+ * @sym: name of the symbol
+ * @tmp: mandatory scratch register
+ * @cond: conditional opcode suffix
+ */
+ .macro str_l, src:req, sym:req, tmp:req, cond
+ __adldst_l str, \src, \sym, \tmp, \cond
+ .endm
+
#endif /* __ASM_ASSEMBLER_H__ */
diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h
index b078d992414b..0ac62a54b73c 100644
--- a/arch/arm/include/asm/elf.h
+++ b/arch/arm/include/asm/elf.h
@@ -51,6 +51,7 @@ typedef struct user_fp elf_fpregset_t;
#define R_ARM_NONE 0
#define R_ARM_PC24 1
#define R_ARM_ABS32 2
+#define R_ARM_REL32 3
#define R_ARM_CALL 28
#define R_ARM_JUMP24 29
#define R_ARM_TARGET1 38
@@ -58,11 +59,15 @@ typedef struct user_fp elf_fpregset_t;
#define R_ARM_PREL31 42
#define R_ARM_MOVW_ABS_NC 43
#define R_ARM_MOVT_ABS 44
+#define R_ARM_MOVW_PREL_NC 45
+#define R_ARM_MOVT_PREL 46
#define R_ARM_THM_CALL 10
#define R_ARM_THM_JUMP24 30
#define R_ARM_THM_MOVW_ABS_NC 47
#define R_ARM_THM_MOVT_ABS 48
+#define R_ARM_THM_MOVW_PREL_NC 49
+#define R_ARM_THM_MOVT_PREL 50
/*
* These are used to set parameters in the core dumps.
diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h
index 38a163f50130..2f841cb65c30 100644
--- a/arch/arm/include/asm/memory.h
+++ b/arch/arm/include/asm/memory.h
@@ -183,6 +183,7 @@ extern unsigned long vectors_base;
* so that all we need to do is modify the 8-bit constant field.
*/
#define __PV_BITS_31_24 0x81000000
+#define __PV_BITS_23_16 0x810000
#define __PV_BITS_7_0 0x81
extern unsigned long __pv_phys_pfn_offset;
@@ -193,43 +194,65 @@ extern const void *__pv_table_begin, *__pv_table_end;
#define PHYS_OFFSET ((phys_addr_t)__pv_phys_pfn_offset << PAGE_SHIFT)
#define PHYS_PFN_OFFSET (__pv_phys_pfn_offset)
-#define __pv_stub(from,to,instr,type) \
+#ifndef CONFIG_THUMB2_KERNEL
+#define __pv_stub(from,to,instr) \
__asm__("@ __pv_stub\n" \
"1: " instr " %0, %1, %2\n" \
+ "2: " instr " %0, %0, %3\n" \
" .pushsection .pv_table,\"a\"\n" \
- " .long 1b\n" \
+ " .long 1b - ., 2b - .\n" \
" .popsection\n" \
: "=r" (to) \
- : "r" (from), "I" (type))
+ : "r" (from), "I" (__PV_BITS_31_24), \
+ "I"(__PV_BITS_23_16))
+
+#define __pv_add_carry_stub(x, y) \
+ __asm__("@ __pv_add_carry_stub\n" \
+ "0: movw %R0, #0\n" \
+ " adds %Q0, %1, %R0, lsl #20\n" \
+ "1: mov %R0, %2\n" \
+ " adc %R0, %R0, #0\n" \
+ " .pushsection .pv_table,\"a\"\n" \
+ " .long 0b - ., 1b - .\n" \
+ " .popsection\n" \
+ : "=&r" (y) \
+ : "r" (x), "I" (__PV_BITS_7_0) \
+ : "cc")
-#define __pv_stub_mov_hi(t) \
- __asm__ volatile("@ __pv_stub_mov\n" \
- "1: mov %R0, %1\n" \
+#else
+#define __pv_stub(from,to,instr) \
+ __asm__("@ __pv_stub\n" \
+ "0: movw %0, #0\n" \
+ " lsl %0, #21\n" \
+ " " instr " %0, %1, %0\n" \
" .pushsection .pv_table,\"a\"\n" \
- " .long 1b\n" \
+ " .long 0b - .\n" \
" .popsection\n" \
- : "=r" (t) \
- : "I" (__PV_BITS_7_0))
+ : "=&r" (to) \
+ : "r" (from))
#define __pv_add_carry_stub(x, y) \
- __asm__ volatile("@ __pv_add_carry_stub\n" \
- "1: adds %Q0, %1, %2\n" \
+ __asm__("@ __pv_add_carry_stub\n" \
+ "0: movw %R0, #0\n" \
+ " lsls %R0, #21\n" \
+ " adds %Q0, %1, %R0\n" \
+ "1: mvn %R0, #0\n" \
" adc %R0, %R0, #0\n" \
" .pushsection .pv_table,\"a\"\n" \
- " .long 1b\n" \
+ " .long 0b - ., 1b - .\n" \
" .popsection\n" \
- : "+r" (y) \
- : "r" (x), "I" (__PV_BITS_31_24) \
+ : "=&r" (y) \
+ : "r" (x) \
: "cc")
+#endif
static inline phys_addr_t __virt_to_phys_nodebug(unsigned long x)
{
phys_addr_t t;
if (sizeof(phys_addr_t) == 4) {
- __pv_stub(x, t, "add", __PV_BITS_31_24);
+ __pv_stub(x, t, "add");
} else {
- __pv_stub_mov_hi(t);
__pv_add_carry_stub(x, t);
}
return t;
@@ -245,7 +268,7 @@ static inline unsigned long __phys_to_virt(phys_addr_t x)
* assembler expression receives 32 bit argument
* in place where 'r' 32 bit operand is expected.
*/
- __pv_stub((unsigned long) x, t, "sub", __PV_BITS_31_24);
+ __pv_stub((unsigned long) x, t, "sub");
return t;
}
diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h
index b9241051e5cb..9e6b97286307 100644
--- a/arch/arm/include/asm/processor.h
+++ b/arch/arm/include/asm/processor.h
@@ -96,7 +96,7 @@ unsigned long get_wchan(struct task_struct *p);
#define __ALT_SMP_ASM(smp, up) \
"9998: " smp "\n" \
" .pushsection \".alt.smp.init\", \"a\"\n" \
- " .long 9998b\n" \
+ " .long 9998b - .\n" \
" " up "\n" \
" .popsection\n"
#else
diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile
index f6431b46866e..c38c8b019d24 100644
--- a/arch/arm/kernel/Makefile
+++ b/arch/arm/kernel/Makefile
@@ -95,6 +95,7 @@ obj-$(CONFIG_PARAVIRT) += paravirt.o
head-y := head$(MMUEXT).o
obj-$(CONFIG_DEBUG_LL) += debug.o
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
+obj-$(CONFIG_ARM_PATCH_PHYS_VIRT) += phys2virt.o
# This is executed very early using a temporary stack when no memory allocator
# nor global data is available. Everything has to be allocated on the stack.
diff --git a/arch/arm/kernel/head-common.S b/arch/arm/kernel/head-common.S
index 89c80154b9ef..29b2eda136bb 100644
--- a/arch/arm/kernel/head-common.S
+++ b/arch/arm/kernel/head-common.S
@@ -173,11 +173,12 @@ ENDPROC(lookup_processor_type)
* r9 = cpuid (preserved)
*/
__lookup_processor_type:
- adr r3, __lookup_processor_type_data
- ldmia r3, {r4 - r6}
- sub r3, r3, r4 @ get offset between virt&phys
- add r5, r5, r3 @ convert virt addresses to
- add r6, r6, r3 @ physical address space
+ /*
+ * Look in <asm/procinfo.h> for information about the __proc_info
+ * structure.
+ */
+ adr_l r5, __proc_info_begin
+ adr_l r6, __proc_info_end
1: ldmia r5, {r3, r4} @ value, mask
and r4, r4, r9 @ mask wanted bits
teq r3, r4
@@ -189,17 +190,6 @@ __lookup_processor_type:
2: ret lr
ENDPROC(__lookup_processor_type)
-/*
- * Look in <asm/procinfo.h> for information about the __proc_info structure.
- */
- .align 2
- .type __lookup_processor_type_data, %object
-__lookup_processor_type_data:
- .long .
- .long __proc_info_begin
- .long __proc_info_end
- .size __lookup_processor_type_data, . - __lookup_processor_type_data
-
__error_lpae:
#ifdef CONFIG_DEBUG_LL
adr r0, str_lpae
diff --git a/arch/arm/kernel/head.S b/arch/arm/kernel/head.S
index 26ffd462a975..7f62c5eccdf3 100644
--- a/arch/arm/kernel/head.S
+++ b/arch/arm/kernel/head.S
@@ -103,10 +103,8 @@ ENTRY(stext)
#endif
#ifndef CONFIG_XIP_KERNEL
- adr r3, 2f
- ldmia r3, {r4, r8}
- sub r4, r3, r4 @ (PHYS_OFFSET - PAGE_OFFSET)
- add r8, r8, r4 @ PHYS_OFFSET
+ adr_l r8, _text @ __pa(_text)
+ sub r8, r8, #TEXT_OFFSET @ PHYS_OFFSET
#else
ldr r8, =PLAT_PHYS_OFFSET @ always constant in this case
#endif
@@ -158,10 +156,6 @@ ENTRY(stext)
1: b __enable_mmu
ENDPROC(stext)
.ltorg
-#ifndef CONFIG_XIP_KERNEL
-2: .long .
- .long PAGE_OFFSET
-#endif
/*
* Setup the initial page tables. We only setup the barest
@@ -224,11 +218,8 @@ __create_page_tables:
* Create identity mapping to cater for __enable_mmu.
* This identity mapping will be removed by paging_init().
*/
- adr r0, __turn_mmu_on_loc
- ldmia r0, {r3, r5, r6}
- sub r0, r0, r3 @ virt->phys offset
- add r5, r5, r0 @ phys __turn_mmu_on
- add r6, r6, r0 @ phys __turn_mmu_on_end
+ adr_l r5, __turn_mmu_on @ _pa(__turn_mmu_on)
+ adr_l r6, __turn_mmu_on_end @ _pa(__turn_mmu_on_end)
mov r5, r5, lsr #SECTION_SHIFT
mov r6, r6, lsr #SECTION_SHIFT
@@ -350,11 +341,6 @@ __create_page_tables:
ret lr
ENDPROC(__create_page_tables)
.ltorg
- .align
-__turn_mmu_on_loc:
- .long .
- .long __turn_mmu_on
- .long __turn_mmu_on_end
#if defined(CONFIG_SMP)
.text
@@ -390,10 +376,8 @@ ENTRY(secondary_startup)
/*
* Use the page tables supplied from __cpu_up.
*/
- adr r4, __secondary_data
- ldmia r4, {r5, r7, r12} @ address to jump to after
- sub lr, r4, r5 @ mmu has been enabled
- add r3, r7, lr
+ adr_l r3, secondary_data
+ mov_l r12, __secondary_switched
ldrd r4, r5, [r3, #0] @ get secondary_data.pgdir
ARM_BE8(eor r4, r4, r5) @ Swap r5 and r4 in BE:
ARM_BE8(eor r5, r4, r5) @ it can be done in 3 steps
@@ -408,22 +392,13 @@ ARM_BE8(eor r4, r4, r5) @ without using a temp reg.
ENDPROC(secondary_startup)
ENDPROC(secondary_startup_arm)
- /*
- * r6 = &secondary_data
- */
ENTRY(__secondary_switched)
- ldr sp, [r7, #12] @ get secondary_data.stack
+ ldr_l r7, secondary_data + 12 @ get secondary_data.stack
+ mov sp, r7
mov fp, #0
b secondary_start_kernel
ENDPROC(__secondary_switched)
- .align
-
- .type __secondary_data, %object
-__secondary_data:
- .long .
- .long secondary_data
- .long __secondary_switched
#endif /* defined(CONFIG_SMP) */
@@ -538,19 +513,11 @@ ARM_BE8(rev r0, r0) @ byteswap if big endian
retne lr
__fixup_smp_on_up:
- adr r0, 1f
- ldmia r0, {r3 - r5}
- sub r3, r0, r3
- add r4, r4, r3
- add r5, r5, r3
+ adr_l r4, __smpalt_begin
+ adr_l r5, __smpalt_end
b __do_fixup_smp_on_up
ENDPROC(__fixup_smp)
- .align
-1: .word .
- .word __smpalt_begin
- .word __smpalt_end
-
.pushsection .data
.align 2
.globl smp_on_up
@@ -564,14 +531,15 @@ smp_on_up:
__do_fixup_smp_on_up:
cmp r4, r5
reths lr
- ldmia r4!, {r0, r6}
- ARM( str r6, [r0, r3] )
- THUMB( add r0, r0, r3 )
+ ldmia r4, {r0, r6}
+ ARM( str r6, [r0, r4] )
+ THUMB( add r0, r0, r4 )
+ add r4, r4, #8
#ifdef __ARMEB__
THUMB( mov r6, r6, ror #16 ) @ Convert word order for big-endian.
#endif
THUMB( strh r6, [r0], #2 ) @ For Thumb-2, store as two halfwords
- THUMB( mov r6, r6, lsr #16 ) @ to be robust against misaligned r3.
+ THUMB( mov r6, r6, lsr #16 ) @ to be robust against misaligned r0.
THUMB( strh r6, [r0] )
b __do_fixup_smp_on_up
ENDPROC(__do_fixup_smp_on_up)
@@ -580,151 +548,8 @@ ENTRY(fixup_smp)
stmfd sp!, {r4 - r6, lr}
mov r4, r0
add r5, r0, r1
- mov r3, #0
bl __do_fixup_smp_on_up
ldmfd sp!, {r4 - r6, pc}
ENDPROC(fixup_smp)
-#ifdef __ARMEB__
-#define LOW_OFFSET 0x4
-#define HIGH_OFFSET 0x0
-#else
-#define LOW_OFFSET 0x0
-#define HIGH_OFFSET 0x4
-#endif
-
-#ifdef CONFIG_ARM_PATCH_PHYS_VIRT
-
-/* __fixup_pv_table - patch the stub instructions with the delta between
- * PHYS_OFFSET and PAGE_OFFSET, which is assumed to be 16MiB aligned and
- * can be expressed by an immediate shifter operand. The stub instruction
- * has a form of '(add|sub) rd, rn, #imm'.
- */
- __HEAD
-__fixup_pv_table:
- adr r0, 1f
- ldmia r0, {r3-r7}
- mvn ip, #0
- subs r3, r0, r3 @ PHYS_OFFSET - PAGE_OFFSET
- add r4, r4, r3 @ adjust table start address
- add r5, r5, r3 @ adjust table end address
- add r6, r6, r3 @ adjust __pv_phys_pfn_offset address
- add r7, r7, r3 @ adjust __pv_offset address
- mov r0, r8, lsr #PAGE_SHIFT @ convert to PFN
- str r0, [r6] @ save computed PHYS_OFFSET to __pv_phys_pfn_offset
- strcc ip, [r7, #HIGH_OFFSET] @ save to __pv_offset high bits
- mov r6, r3, lsr #24 @ constant for add/sub instructions
- teq r3, r6, lsl #24 @ must be 16MiB aligned
-THUMB( it ne @ cross section branch )
- bne __error
- str r3, [r7, #LOW_OFFSET] @ save to __pv_offset low bits
- b __fixup_a_pv_table
-ENDPROC(__fixup_pv_table)
-
- .align
-1: .long .
- .long __pv_table_begin
- .long __pv_table_end
-2: .long __pv_phys_pfn_offset
- .long __pv_offset
-
- .text
-__fixup_a_pv_table:
- adr r0, 3f
- ldr r6, [r0]
- add r6, r6, r3
- ldr r0, [r6, #HIGH_OFFSET] @ pv_offset high word
- ldr r6, [r6, #LOW_OFFSET] @ pv_offset low word
- mov r6, r6, lsr #24
- cmn r0, #1
-#ifdef CONFIG_THUMB2_KERNEL
- moveq r0, #0x200000 @ set bit 21, mov to mvn instruction
- lsls r6, #24
- beq 2f
- clz r7, r6
- lsr r6, #24
- lsl r6, r7
- bic r6, #0x0080
- lsrs r7, #1
- orrcs r6, #0x0080
- orr r6, r6, r7, lsl #12
- orr r6, #0x4000
- b 2f
-1: add r7, r3
- ldrh ip, [r7, #2]
-ARM_BE8(rev16 ip, ip)
- tst ip, #0x4000
- and ip, #0x8f00
- orrne ip, r6 @ mask in offset bits 31-24
- orreq ip, r0 @ mask in offset bits 7-0
-ARM_BE8(rev16 ip, ip)
- strh ip, [r7, #2]
- bne 2f
- ldrh ip, [r7]
-ARM_BE8(rev16 ip, ip)
- bic ip, #0x20
- orr ip, ip, r0, lsr #16
-ARM_BE8(rev16 ip, ip)
- strh ip, [r7]
-2: cmp r4, r5
- ldrcc r7, [r4], #4 @ use branch for delay slot
- bcc 1b
- bx lr
-#else
-#ifdef CONFIG_CPU_ENDIAN_BE8
- moveq r0, #0x00004000 @ set bit 22, mov to mvn instruction
-#else
- moveq r0, #0x400000 @ set bit 22, mov to mvn instruction
-#endif
- b 2f
-1: ldr ip, [r7, r3]
-#ifdef CONFIG_CPU_ENDIAN_BE8
- @ in BE8, we load data in BE, but instructions still in LE
- bic ip, ip, #0xff000000
- tst ip, #0x000f0000 @ check the rotation field
- orrne ip, ip, r6, lsl #24 @ mask in offset bits 31-24
- biceq ip, ip, #0x00004000 @ clear bit 22
- orreq ip, ip, r0 @ mask in offset bits 7-0
-#else
- bic ip, ip, #0x000000ff
- tst ip, #0xf00 @ check the rotation field
- orrne ip, ip, r6 @ mask in offset bits 31-24
- biceq ip, ip, #0x400000 @ clear bit 22
- orreq ip, ip, r0 @ mask in offset bits 7-0
-#endif
- str ip, [r7, r3]
-2: cmp r4, r5
- ldrcc r7, [r4], #4 @ use branch for delay slot
- bcc 1b
- ret lr
-#endif
-ENDPROC(__fixup_a_pv_table)
-
- .align
-3: .long __pv_offset
-
-ENTRY(fixup_pv_table)
- stmfd sp!, {r4 - r7, lr}
- mov r3, #0 @ no offset
- mov r4, r0 @ r0 = table start
- add r5, r0, r1 @ r1 = table size
- bl __fixup_a_pv_table
- ldmfd sp!, {r4 - r7, pc}
-ENDPROC(fixup_pv_table)
-
- .data
- .align 2
- .globl __pv_phys_pfn_offset
- .type __pv_phys_pfn_offset, %object
-__pv_phys_pfn_offset:
- .word 0
- .size __pv_phys_pfn_offset, . -__pv_phys_pfn_offset
-
- .globl __pv_offset
- .type __pv_offset, %object
-__pv_offset:
- .quad 0
- .size __pv_offset, . -__pv_offset
-#endif
-
#include "head-common.S"
diff --git a/arch/arm/kernel/hyp-stub.S b/arch/arm/kernel/hyp-stub.S
index 327f63ec42c6..b699b22a4db1 100644
--- a/arch/arm/kernel/hyp-stub.S
+++ b/arch/arm/kernel/hyp-stub.S
@@ -24,41 +24,38 @@ ENTRY(__boot_cpu_mode)
.text
/*
- * Save the primary CPU boot mode. Requires 3 scratch registers.
+ * Save the primary CPU boot mode. Requires 2 scratch registers.
*/
- .macro store_primary_cpu_mode reg1, reg2, reg3
+ .macro store_primary_cpu_mode reg1, reg2
mrs \reg1, cpsr
and \reg1, \reg1, #MODE_MASK
- adr \reg2, .L__boot_cpu_mode_offset
- ldr \reg3, [\reg2]
- str \reg1, [\reg2, \reg3]
+ str_l \reg1, __boot_cpu_mode, \reg2
.endm
/*
* Compare the current mode with the one saved on the primary CPU.
* If they don't match, record that fact. The Z bit indicates
* if there's a match or not.
- * Requires 3 additionnal scratch registers.
+ * Requires 2 additional scratch registers.
*/
- .macro compare_cpu_mode_with_primary mode, reg1, reg2, reg3
- adr \reg2, .L__boot_cpu_mode_offset
- ldr \reg3, [\reg2]
- ldr \reg1, [\reg2, \reg3]
+ .macro compare_cpu_mode_with_primary mode, reg1, reg2
+ adr_l \reg2, __boot_cpu_mode
+ ldr \reg1, [\reg2]
cmp \mode, \reg1 @ matches primary CPU boot mode?
orrne \reg1, \reg1, #BOOT_CPU_MODE_MISMATCH
- strne \reg1, [\reg2, \reg3] @ record what happened and give up
+ strne \reg1, [\reg2] @ record what happened and give up
.endm
#else /* ZIMAGE */
- .macro store_primary_cpu_mode reg1:req, reg2:req, reg3:req
+ .macro store_primary_cpu_mode reg1:req, reg2:req
.endm
/*
* The zImage loader only runs on one CPU, so we don't bother with mult-CPU
* consistency checking:
*/
- .macro compare_cpu_mode_with_primary mode, reg1, reg2, reg3
+ .macro compare_cpu_mode_with_primary mode, reg1, reg2
cmp \mode, \mode
.endm
@@ -73,7 +70,7 @@ ENTRY(__boot_cpu_mode)
*/
@ Call this from the primary CPU
ENTRY(__hyp_stub_install)
- store_primary_cpu_mode r4, r5, r6
+ store_primary_cpu_mode r4, r5
ENDPROC(__hyp_stub_install)
@ fall through...
@@ -87,7 +84,7 @@ ENTRY(__hyp_stub_install_secondary)
* If the secondary has booted with a different mode, give up
* immediately.
*/
- compare_cpu_mode_with_primary r4, r5, r6, r7
+ compare_cpu_mode_with_primary r4, r5, r6
retne lr
/*
diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c
index e15444b25ca0..beac45e89ba6 100644
--- a/arch/arm/kernel/module.c
+++ b/arch/arm/kernel/module.c
@@ -185,14 +185,24 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
*(u32 *)loc |= offset & 0x7fffffff;
break;
+ case R_ARM_REL32:
+ *(u32 *)loc += sym->st_value - loc;
+ break;
+
case R_ARM_MOVW_ABS_NC:
case R_ARM_MOVT_ABS:
+ case R_ARM_MOVW_PREL_NC:
+ case R_ARM_MOVT_PREL:
offset = tmp = __mem_to_opcode_arm(*(u32 *)loc);
offset = ((offset & 0xf0000) >> 4) | (offset & 0xfff);
offset = (offset ^ 0x8000) - 0x8000;
offset += sym->st_value;
- if (ELF32_R_TYPE(rel->r_info) == R_ARM_MOVT_ABS)
+ if (ELF32_R_TYPE(rel->r_info) == R_ARM_MOVT_PREL ||
+ ELF32_R_TYPE(rel->r_info) == R_ARM_MOVW_PREL_NC)
+ offset -= loc;
+ if (ELF32_R_TYPE(rel->r_info) == R_ARM_MOVT_ABS ||
+ ELF32_R_TYPE(rel->r_info) == R_ARM_MOVT_PREL)
offset >>= 16;
tmp &= 0xfff0f000;
@@ -283,6 +293,8 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
case R_ARM_THM_MOVW_ABS_NC:
case R_ARM_THM_MOVT_ABS:
+ case R_ARM_THM_MOVW_PREL_NC:
+ case R_ARM_THM_MOVT_PREL:
upper = __mem_to_opcode_thumb16(*(u16 *)loc);
lower = __mem_to_opcode_thumb16(*(u16 *)(loc + 2));
@@ -302,7 +314,11 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
offset = (offset ^ 0x8000) - 0x8000;
offset += sym->st_value;
- if (ELF32_R_TYPE(rel->r_info) == R_ARM_THM_MOVT_ABS)
+ if (ELF32_R_TYPE(rel->r_info) == R_ARM_THM_MOVT_PREL ||
+ ELF32_R_TYPE(rel->r_info) == R_ARM_THM_MOVW_PREL_NC)
+ offset -= loc;
+ if (ELF32_R_TYPE(rel->r_info) == R_ARM_THM_MOVT_ABS ||
+ ELF32_R_TYPE(rel->r_info) == R_ARM_THM_MOVT_PREL)
offset >>= 16;
upper = (u16)((upper & 0xfbf0) |
diff --git a/arch/arm/kernel/phys2virt.S b/arch/arm/kernel/phys2virt.S
new file mode 100644
index 000000000000..fb53db78fe78
--- /dev/null
+++ b/arch/arm/kernel/phys2virt.S
@@ -0,0 +1,238 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 1994-2002 Russell King
+ * Copyright (c) 2003, 2020 ARM Limited
+ * All Rights Reserved
+ */
+
+#include <linux/init.h>
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+#include <asm/page.h>
+
+#ifdef __ARMEB__
+#define LOW_OFFSET 0x4
+#define HIGH_OFFSET 0x0
+#else
+#define LOW_OFFSET 0x0
+#define HIGH_OFFSET 0x4
+#endif
+
+/*
+ * __fixup_pv_table - patch the stub instructions with the delta between
+ * PHYS_OFFSET and PAGE_OFFSET, which is assumed to be
+ * 2 MiB aligned.
+ *
+ * Called from head.S, which expects the following registers to be preserved:
+ * r1 = machine no, r2 = atags or dtb,
+ * r8 = phys_offset, r9 = cpuid, r10 = procinfo
+ */
+ __HEAD
+ENTRY(__fixup_pv_table)
+ mov r0, r8, lsr #PAGE_SHIFT @ convert to PFN
+ str_l r0, __pv_phys_pfn_offset, r3
+
+ adr_l r0, __pv_offset
+ subs r3, r8, #PAGE_OFFSET @ PHYS_OFFSET - PAGE_OFFSET
+ mvn ip, #0
+ strcc ip, [r0, #HIGH_OFFSET] @ save to __pv_offset high bits
+ str r3, [r0, #LOW_OFFSET] @ save to __pv_offset low bits
+
+ mov r0, r3, lsr #21 @ constant for add/sub instructions
+ teq r3, r0, lsl #21 @ must be 2 MiB aligned
+ bne 0f
+
+ adr_l r4, __pv_table_begin
+ adr_l r5, __pv_table_end
+ b __fixup_a_pv_table
+
+0: mov r0, r0 @ deadloop on error
+ b 0b
+ENDPROC(__fixup_pv_table)
+
+ .text
+__fixup_a_pv_table:
+ adr_l r6, __pv_offset
+ ldr r0, [r6, #HIGH_OFFSET] @ pv_offset high word
+ ldr r6, [r6, #LOW_OFFSET] @ pv_offset low word
+ cmn r0, #1
+#ifdef CONFIG_THUMB2_KERNEL
+ @
+ @ The Thumb-2 versions of the patchable sequences are
+ @
+ @ phys-to-virt: movw <reg>, #offset<31:21>
+ @ lsl <reg>, #21
+ @ sub <VA>, <PA>, <reg>
+ @
+ @ virt-to-phys (non-LPAE): movw <reg>, #offset<31:21>
+ @ lsl <reg>, #21
+ @ add <PA>, <VA>, <reg>
+ @
+ @ virt-to-phys (LPAE): movw <reg>, #offset<31:21>
+ @ lsl <reg>, #21
+ @ adds <PAlo>, <VA>, <reg>
+ @ mov <PAhi>, #offset<39:32>
+ @ adc <PAhi>, <PAhi>, #0
+ @
+ @ In the non-LPAE case, all patchable instructions are MOVW
+ @ instructions, where we need to patch in the offset into the
+ @ second halfword of the opcode (the 16-bit immediate is encoded
+ @ as imm4:i:imm3:imm8)
+ @
+ @ 15 11 10 9 4 3 0 15 14 12 11 8 7 0
+ @ +-----------+---+-------------+------++---+------+----+------+
+ @ MOVW | 1 1 1 1 0 | i | 1 0 0 1 0 0 | imm4 || 0 | imm3 | Rd | imm8 |
+ @ +-----------+---+-------------+------++---+------+----+------+
+ @
+ @ In the LPAE case, we also need to patch in the high word of the
+ @ offset into the immediate field of the MOV instruction, or patch it
+ @ to a MVN instruction if the offset is negative. In this case, we
+ @ need to inspect the first halfword of the opcode, to check whether
+ @ it is MOVW or MOV/MVN, and to perform the MOV to MVN patching if
+ @ needed. The encoding of the immediate is rather complex for values
+ @ of i:imm3 != 0b0000, but fortunately, we never need more than 8 lower
+ @ order bits, which can be patched into imm8 directly (and i:imm3
+ @ cleared)
+ @
+ @ 15 11 10 9 5 0 15 14 12 11 8 7 0
+ @ +-----------+---+---------------------++---+------+----+------+
+ @ MOV | 1 1 1 1 0 | i | 0 0 0 1 0 0 1 1 1 1 || 0 | imm3 | Rd | imm8 |
+ @ MVN | 1 1 1 1 0 | i | 0 0 0 1 1 0 1 1 1 1 || 0 | imm3 | Rd | imm8 |
+ @ +-----------+---+---------------------++---+------+----+------+
+ @
+ moveq r0, #0x200000 @ set bit 21, mov to mvn instruction
+ lsrs r3, r6, #29 @ isolate top 3 bits of displacement
+ ubfx r6, r6, #21, #8 @ put bits 28:21 into the MOVW imm8 field
+ bfi r6, r3, #12, #3 @ put bits 31:29 into the MOVW imm3 field
+ b .Lnext
+.Lloop: add r7, r4
+ adds r4, #4 @ clears Z flag
+#ifdef CONFIG_ARM_LPAE
+ ldrh ip, [r7]
+ARM_BE8(rev16 ip, ip)
+ tst ip, #0x200 @ MOVW has bit 9 set, MVN has it clear
+ bne 0f @ skip to MOVW handling (Z flag is clear)
+ bic ip, #0x20 @ clear bit 5 (MVN -> MOV)
+ orr ip, ip, r0, lsr #16 @ MOV -> MVN if offset < 0
+ARM_BE8(rev16 ip, ip)
+ strh ip, [r7]
+ @ Z flag is set
+0:
+#endif
+ ldrh ip, [r7, #2]
+ARM_BE8(rev16 ip, ip)
+ and ip, #0xf00 @ clear everything except Rd field
+ orreq ip, r0 @ Z flag set -> MOV/MVN -> patch in high bits
+ orrne ip, r6 @ Z flag clear -> MOVW -> patch in low bits
+ARM_BE8(rev16 ip, ip)
+ strh ip, [r7, #2]
+#else
+#ifdef CONFIG_CPU_ENDIAN_BE8
+@ in BE8, we load data in BE, but instructions still in LE
+#define PV_BIT24 0x00000001
+#define PV_IMM8_MASK 0xff000000
+#define PV_IMMR_MSB 0x00080000
+#else
+#define PV_BIT24 0x01000000
+#define PV_IMM8_MASK 0x000000ff
+#define PV_IMMR_MSB 0x00000800
+#endif
+
+ @
+ @ The ARM versions of the patchable sequences are
+ @
+ @ phys-to-virt: sub <VA>, <PA>, #offset<31:24>, lsl #24
+ @ sub <VA>, <PA>, #offset<23:16>, lsl #16
+ @
+ @ virt-to-phys (non-LPAE): add <PA>, <VA>, #offset<31:24>, lsl #24
+ @ add <PA>, <VA>, #offset<23:16>, lsl #16
+ @
+ @ virt-to-phys (LPAE): movw <reg>, #offset<31:20>
+ @ adds <PAlo>, <VA>, <reg>, lsl #20
+ @ mov <PAhi>, #offset<39:32>
+ @ adc <PAhi>, <PAhi>, #0
+ @
+ @ In the non-LPAE case, all patchable instructions are ADD or SUB
+ @ instructions, where we need to patch in the offset into the
+ @ immediate field of the opcode, which is emitted with the correct
+ @ rotation value. (The effective value of the immediate is imm12<7:0>
+ @ rotated right by [2 * imm12<11:8>] bits)
+ @
+ @ 31 28 27 23 22 20 19 16 15 12 11 0
+ @ +------+-----------------+------+------+-------+
+ @ ADD | cond | 0 0 1 0 1 0 0 0 | Rn | Rd | imm12 |
+ @ SUB | cond | 0 0 1 0 0 1 0 0 | Rn | Rd | imm12 |
+ @ MOV | cond | 0 0 1 1 1 0 1 0 | Rn | Rd | imm12 |
+ @ MVN | cond | 0 0 1 1 1 1 1 0 | Rn | Rd | imm12 |
+ @ +------+-----------------+------+------+-------+
+ @
+ @ In the LPAE case, we use a MOVW instruction to carry the low offset
+ @ word, and patch in the high word of the offset into the immediate
+ @ field of the subsequent MOV instruction, or patch it to a MVN
+ @ instruction if the offset is negative. We can distinguish MOVW
+ @ instructions based on bits 23:22 of the opcode, and ADD/SUB can be
+ @ distinguished from MOV/MVN (all using the encodings above) using
+ @ bit 24.
+ @
+ @ 31 28 27 23 22 20 19 16 15 12 11 0
+ @ +------+-----------------+------+------+-------+
+ @ MOVW | cond | 0 0 1 1 0 0 0 0 | imm4 | Rd | imm12 |
+ @ +------+-----------------+------+------+-------+
+ @
+ moveq r0, #0x400000 @ set bit 22, mov to mvn instruction
+ mov r3, r6, lsr #16 @ put offset bits 31-16 into r3
+ mov r6, r6, lsr #24 @ put offset bits 31-24 into r6
+ and r3, r3, #0xf0 @ only keep offset bits 23-20 in r3
+ b .Lnext
+.Lloop: ldr ip, [r7, r4]
+#ifdef CONFIG_ARM_LPAE
+ tst ip, #PV_BIT24 @ ADD/SUB have bit 24 clear
+ beq 1f
+ARM_BE8(rev ip, ip)
+ tst ip, #0xc00000 @ MOVW has bits 23:22 clear
+ bic ip, ip, #0x400000 @ clear bit 22
+ bfc ip, #0, #12 @ clear imm12 field of MOV[W] instruction
+ orreq ip, ip, r6, lsl #4 @ MOVW -> mask in offset bits 31-24
+ orreq ip, ip, r3, lsr #4 @ MOVW -> mask in offset bits 23-20
+ orrne ip, ip, r0 @ MOV -> mask in offset bits 7-0 (or bit 22)
+ARM_BE8(rev ip, ip)
+ b 2f
+1:
+#endif
+ tst ip, #PV_IMMR_MSB @ rotation value >= 16 ?
+ bic ip, ip, #PV_IMM8_MASK
+ orreq ip, ip, r6 ARM_BE8(, lsl #24) @ mask in offset bits 31-24
+ orrne ip, ip, r3 ARM_BE8(, lsl #24) @ mask in offset bits 23-20
+2:
+ str ip, [r7, r4]
+ add r4, r4, #4
+#endif
+
+.Lnext:
+ cmp r4, r5
+ ldrcc r7, [r4] @ use branch for delay slot
+ bcc .Lloop
+ ret lr
+ENDPROC(__fixup_a_pv_table)
+
+ENTRY(fixup_pv_table)
+ stmfd sp!, {r4 - r7, lr}
+ mov r4, r0 @ r0 = table start
+ add r5, r0, r1 @ r1 = table size
+ bl __fixup_a_pv_table
+ ldmfd sp!, {r4 - r7, pc}
+ENDPROC(fixup_pv_table)
+
+ .data
+ .align 2
+ .globl __pv_phys_pfn_offset
+ .type __pv_phys_pfn_offset, %object
+__pv_phys_pfn_offset:
+ .word 0
+ .size __pv_phys_pfn_offset, . -__pv_phys_pfn_offset
+
+ .globl __pv_offset
+ .type __pv_offset, %object
+__pv_offset:
+ .quad 0
+ .size __pv_offset, . -__pv_offset
diff --git a/arch/arm/kernel/sleep.S b/arch/arm/kernel/sleep.S
index 5dc8b80bb693..43077e11dafd 100644
--- a/arch/arm/kernel/sleep.S
+++ b/arch/arm/kernel/sleep.S
@@ -72,8 +72,9 @@ ENTRY(__cpu_suspend)
ldr r3, =sleep_save_sp
stmfd sp!, {r0, r1} @ save suspend func arg and pointer
ldr r3, [r3, #SLEEP_SAVE_SP_VIRT]
- ALT_SMP(ldr r0, =mpidr_hash)
+ ALT_SMP(W(nop)) @ don't use adr_l inside ALT_SMP()
ALT_UP_B(1f)
+ adr_l r0, mpidr_hash
/* This ldmia relies on the memory layout of the mpidr_hash struct */
ldmia r0, {r1, r6-r8} @ r1 = mpidr mask (r6,r7,r8) = l[0,1,2] shifts
compute_mpidr_hash r0, r6, r7, r8, r2, r1
@@ -147,9 +148,8 @@ no_hyp:
mov r1, #0
ALT_SMP(mrc p15, 0, r0, c0, c0, 5)
ALT_UP_B(1f)
- adr r2, mpidr_hash_ptr
- ldr r3, [r2]
- add r2, r2, r3 @ r2 = struct mpidr_hash phys address
+ adr_l r2, mpidr_hash @ r2 = struct mpidr_hash phys address
+
/*
* This ldmia relies on the memory layout of the mpidr_hash
* struct mpidr_hash.
@@ -157,10 +157,7 @@ no_hyp:
ldmia r2, { r3-r6 } @ r3 = mpidr mask (r4,r5,r6) = l[0,1,2] shifts
compute_mpidr_hash r1, r4, r5, r6, r0, r3
1:
- adr r0, _sleep_save_sp
- ldr r2, [r0]
- add r0, r0, r2
- ldr r0, [r0, #SLEEP_SAVE_SP_PHYS]
+ ldr_l r0, sleep_save_sp + SLEEP_SAVE_SP_PHYS
ldr r0, [r0, r1, lsl #2]
@ load phys pgd, stack, resume fn
@@ -177,12 +174,6 @@ ENDPROC(cpu_resume_arm)
ENDPROC(cpu_resume_no_hyp)
#endif
- .align 2
-_sleep_save_sp:
- .long sleep_save_sp - .
-mpidr_hash_ptr:
- .long mpidr_hash - . @ mpidr_hash struct offset
-
.data
.align 2
.type sleep_save_sp, #object