Merge tag 'drm-next-2023-06-29' of git://anongit.freedesktop.org/drm/drm

Pull drm updates from Dave Airlie:
 "There is one set of patches to misc for a i915 gsc/mei proxy driver.

  Otherwise it's mostly amdgpu/i915/msm, lots of hw enablement and lots
  of refactoring.

  core:
   - replace strlcpy with strscpy
   - EDID changes to support further conversion to struct drm_edid
   - Move i915 DSC parameter code to common DRM helpers
   - Add Colorspace functionality

  aperture:
   - ignore framebuffers with non-primary devices

  fbdev:
   - use fbdev i/o helpers
   - add Kconfig options for fb_ops helpers
   - use new fb io helpers directly in drivers

  sysfs:
   - export DRM connector ID

  scheduler:
   - Avoid an infinite loop

  ttm:
   - store function table in .rodata
   - Add query for TTM mem limit
   - Add NUMA awareness to pools
   - Export ttm_pool_fini()

  bridge:
   - fsl-ldb: support i.MX6SX
   - lt9211, lt9611: remove blanking packets
   - tc358768: implement input bus formats, devm cleanups
   - ti-snd65dsi86: implement wait_hpd_asserted
   - analogix: fix endless probe loop
   - samsung-dsim: support swapped clock, fix enabling, support var
     clock
   - display-connector: Add support for external power supply
   - imx: Fix module linking
   - tc358762: Support reset GPIO

  panel:
   - nt36523: Support Lenovo J606F
   - st7703: Support Anbernic RG353V-V2
   - InnoLux G070ACE-L01 support
   - boe-tv101wum-nl6: Improve initialization
   - sharp-ls043t1le001: Mode fixes
   - simple: BOE EV121WXM-N10-1850, S6D7AA0
   - Ampire AM-800480L1TMQW-T00H
   - Rocktech RK043FN48H
   - Starry himax83102-j02
   - Starry ili9882t

  amdgpu:
   - add new ctx query flag to handle reset better
   - add new query/set shadow buffer for rdna3
   - DCN 3.2/3.1.x/3.0.x updates
   - Enable DC_FP on loongarch
   - PCIe fix for RDNA2
   - improve DC FAMS/SubVP support for better power management
   - partition support for lots of engines
   - Take NUMA into account when allocating memory
   - Add new DRM_AMDGPU_WERROR config parameter to help with CI
   - Initial SMU13 overdrive support
   - Add support for new colorspace KMS API
   - W=1 fixes

  amdkfd:
   - Query TTM mem limit rather than hardcoding it
   - GC 9.4.3 partition support
   - Handle NUMA for partitions
   - Add debugger interface for enabling gdb
   - Add KFD event age tracking

  radeon:
   - Fix possible UAF

  i915:
   - new getparam for PXP support
   - GSC/MEI proxy driver
   - Meteorlake display enablement
   - avoid clearing preallocated framebuffers with TTM
   - implement framebuffer mmap support
   - Disable sampler indirect state in bindless heap
   - Enable fdinfo for GuC backends
   - GuC loading and firmware table handling fixes
   - Various refactors for multi-tile enablement
   - Define MOCS and PAT tables for MTL
   - GSC/MEI support for Meteorlake
   - PMU multi-tile support
   - Large driver kernel doc cleanup
   - Allow VRR toggling and arbitrary refresh rates
   - Support async flips on linear buffers on display ver 12+
   - Expose CRTC CTM property on ILK/SNB/VLV
   - New debugfs for display clock frequencies
   - Hotplug refactoring
   - Display refactoring
   - I915_GEM_CREATE_EXT_SET_PAT for Mesa on Meteorlake
   - Use large rings for compute contexts
   - HuC loading for MTL
   - Allow user to set cache at BO creation
   - MTL powermanagement enhancements
   - Switch to dedicated workqueues to stop using flush_scheduled_work()
   - Move display runtime init under display/
   - Remove 10bit gamma on desktop gen3 parts, they don't support it

  habanalabs:
   - uapi: return 0 for user queries if there was a h/w or f/w error
   - Add pci health check when we lose connection with the firmware.
     This can be used to distinguish between pci link down and firmware
     getting stuck.
   - Add more info to the error print when TPC interrupt occur.
   - Firmware fixes

  msm:
   - Adreno A660 bindings
   - SM8350 MDSS bindings fix
   - Added support for DPU on sm6350 and sm6375 platforms
   - Implemented tearcheck support to support vsync on SM150 and newer
     platforms
   - Enabled missing features (DSPP, DSC, split display) on sc8180x,
     sc8280xp, sm8450
   - Added support for DSI and 28nm DSI PHY on MSM8226 platform
   - Added support for DSI on sm6350 and sm6375 platforms
   - Added support for display controller on MSM8226 platform
   - A690 GPU support
   - Move cmdstream dumping out of fence signaling path
   - a610 support
   - Support for a6xx devices without GMU

  nouveau:
   - NULL ptr before deref fixes

  armada:
   - implement fbdev emulation as client

  sun4i:
   - fix mipi-dsi dotclock
   - release clocks

  vc4:
   - rgb range toggle property
   - BT601 / BT2020 HDMI support

  vkms:
   - convert to drmm helpers
   - add reflection and rotation support
   - fix rgb565 conversion

  gma500:
   - fix iomem access

  shmobile:
   - support renesas soc platform
   - enable fbdev

  mxsfb:
   - Add support for i.MX93 LCDIF

  stm:
   - dsi: Use devm_ helper
   - ltdc: Fix potential invalid pointer deref

  renesas:
   - Group drivers in renesas subdirectory to prepare for new platform
   - Drop deprecated R-Car H3 ES1.x support

  meson:
   - Add support for MIPI DSI displays

  virtio:
   - add sync object support

  mediatek:
   - Add display binding document for MT6795"

* tag 'drm-next-2023-06-29' of git://anongit.freedesktop.org/drm/drm: (1791 commits)
  drm/i915: Fix a NULL vs IS_ERR() bug
  drm/i915: make i915_drm_client_fdinfo() reference conditional again
  drm/i915/huc: Fix missing error code in intel_huc_init()
  drm/i915/gsc: take a wakeref for the proxy-init-completion check
  drm/msm/a6xx: Add A610 speedbin support
  drm/msm/a6xx: Add A619_holi speedbin support
  drm/msm/a6xx: Use adreno_is_aXYZ macros in speedbin matching
  drm/msm/a6xx: Use "else if" in GPU speedbin rev matching
  drm/msm/a6xx: Fix some A619 tunables
  drm/msm/a6xx: Add A610 support
  drm/msm/a6xx: Add support for A619_holi
  drm/msm/adreno: Disable has_cached_coherent in GMU wrapper configurations
  drm/msm/a6xx: Introduce GMU wrapper support
  drm/msm/a6xx: Move CX GMU power counter enablement to hw_init
  drm/msm/a6xx: Extend and explain UBWC config
  drm/msm/a6xx: Remove both GBIF and RBBM GBIF halt on hw init
  drm/msm/a6xx: Add a helper for software-resetting the GPU
  drm/msm/a6xx: Improve a6xx_bus_clear_pending_transactions()
  drm/msm/a6xx: Move a6xx_bus_clear_pending_transactions to a6xx_gpu
  drm/msm/a6xx: Move force keepalive vote removal to a6xx_gmu_force_off()
  ...

1 files changed, 90 insertions, 19 deletions

diff --git a/drivers/gpu/drm/display/drm_dp_mst_topology.c b/drivers/gpu/drm/display/drm_dp_mst_topology.c
index 943a00db77d4..ed96cfcfa304 100644
--- a/drivers/gpu/drm/display/drm_dp_mst_topology.c
+++ b/drivers/gpu/drm/display/drm_dp_mst_topology.c
@@ -1823,7 +1823,7 @@ static void drm_dp_destroy_port(struct kref *kref)
 		return;
 	}
 
-	kfree(port->cached_edid);
+	drm_edid_free(port->cached_edid);
 
 	/*
 	 * we can't destroy the connector here, as we might be holding the
@@ -2272,8 +2272,8 @@ drm_dp_mst_port_add_connector(struct drm_dp_mst_branch *mstb,
 	if (port->pdt != DP_PEER_DEVICE_NONE &&
 	    drm_dp_mst_is_end_device(port->pdt, port->mcs) &&
 	    port->port_num >= DP_MST_LOGICAL_PORT_0)
-		port->cached_edid = drm_get_edid(port->connector,
-						 &port->aux.ddc);
+		port->cached_edid = drm_edid_read_ddc(port->connector,
+						      &port->aux.ddc);
 
 	drm_connector_register(port->connector);
 	return;
@@ -4053,17 +4053,28 @@ out:
 }
 
 /**
- * drm_dp_mst_hpd_irq() - MST hotplug IRQ notify
+ * drm_dp_mst_hpd_irq_handle_event() - MST hotplug IRQ handle MST event
  * @mgr: manager to notify irq for.
  * @esi: 4 bytes from SINK_COUNT_ESI
+ * @ack: 4 bytes used to ack events starting from SINK_COUNT_ESI
  * @handled: whether the hpd interrupt was consumed or not
  *
- * This should be called from the driver when it detects a short IRQ,
+ * This should be called from the driver when it detects a HPD IRQ,
  * along with the value of the DEVICE_SERVICE_IRQ_VECTOR_ESI0. The
- * topology manager will process the sideband messages received as a result
- * of this.
+ * topology manager will process the sideband messages received
+ * as indicated in the DEVICE_SERVICE_IRQ_VECTOR_ESI0 and set the
+ * corresponding flags that Driver has to ack the DP receiver later.
+ *
+ * Note that driver shall also call
+ * drm_dp_mst_hpd_irq_send_new_request() if the 'handled' is set
+ * after calling this function, to try to kick off a new request in
+ * the queue if the previous message transaction is completed.
+ *
+ * See also:
+ * drm_dp_mst_hpd_irq_send_new_request()
  */
-int drm_dp_mst_hpd_irq(struct drm_dp_mst_topology_mgr *mgr, u8 *esi, bool *handled)
+int drm_dp_mst_hpd_irq_handle_event(struct drm_dp_mst_topology_mgr *mgr, const u8 *esi,
+				    u8 *ack, bool *handled)
 {
 	int ret = 0;
 	int sc;
@@ -4078,19 +4089,48 @@ int drm_dp_mst_hpd_irq(struct drm_dp_mst_topology_mgr *mgr, u8 *esi, bool *handl
 	if (esi[1] & DP_DOWN_REP_MSG_RDY) {
 		ret = drm_dp_mst_handle_down_rep(mgr);
 		*handled = true;
+		ack[1] |= DP_DOWN_REP_MSG_RDY;
 	}
 
 	if (esi[1] & DP_UP_REQ_MSG_RDY) {
 		ret |= drm_dp_mst_handle_up_req(mgr);
 		*handled = true;
+		ack[1] |= DP_UP_REQ_MSG_RDY;
 	}
 
-	drm_dp_mst_kick_tx(mgr);
 	return ret;
 }
-EXPORT_SYMBOL(drm_dp_mst_hpd_irq);
+EXPORT_SYMBOL(drm_dp_mst_hpd_irq_handle_event);
 
 /**
+ * drm_dp_mst_hpd_irq_send_new_request() - MST hotplug IRQ kick off new request
+ * @mgr: manager to notify irq for.
+ *
+ * This should be called from the driver when mst irq event is handled
+ * and acked. Note that new down request should only be sent when
+ * previous message transaction is completed. Source is not supposed to generate
+ * interleaved message transactions.
+ */
+void drm_dp_mst_hpd_irq_send_new_request(struct drm_dp_mst_topology_mgr *mgr)
+{
+	struct drm_dp_sideband_msg_tx *txmsg;
+	bool kick = true;
+
+	mutex_lock(&mgr->qlock);
+	txmsg = list_first_entry_or_null(&mgr->tx_msg_downq,
+					 struct drm_dp_sideband_msg_tx, next);
+	/* If last transaction is not completed yet*/
+	if (!txmsg ||
+	    txmsg->state == DRM_DP_SIDEBAND_TX_START_SEND ||
+	    txmsg->state == DRM_DP_SIDEBAND_TX_SENT)
+		kick = false;
+	mutex_unlock(&mgr->qlock);
+
+	if (kick)
+		drm_dp_mst_kick_tx(mgr);
+}
+EXPORT_SYMBOL(drm_dp_mst_hpd_irq_send_new_request);
+/**
  * drm_dp_mst_detect_port() - get connection status for an MST port
  * @connector: DRM connector for this port
  * @ctx: The acquisition context to use for grabbing locks
@@ -4133,7 +4173,7 @@ drm_dp_mst_detect_port(struct drm_connector *connector,
 		ret = connector_status_connected;
 		/* for logical ports - cache the EDID */
 		if (port->port_num >= DP_MST_LOGICAL_PORT_0 && !port->cached_edid)
-			port->cached_edid = drm_get_edid(connector, &port->aux.ddc);
+			port->cached_edid = drm_edid_read_ddc(connector, &port->aux.ddc);
 		break;
 	case DP_PEER_DEVICE_DP_LEGACY_CONV:
 		if (port->ldps)
@@ -4147,7 +4187,7 @@ out:
 EXPORT_SYMBOL(drm_dp_mst_detect_port);
 
 /**
- * drm_dp_mst_get_edid() - get EDID for an MST port
+ * drm_dp_mst_edid_read() - get EDID for an MST port
  * @connector: toplevel connector to get EDID for
  * @mgr: manager for this port
  * @port: unverified pointer to a port.
@@ -4156,9 +4196,11 @@ EXPORT_SYMBOL(drm_dp_mst_detect_port);
  * It validates the pointer still exists so the caller doesn't require a
  * reference.
  */
-struct edid *drm_dp_mst_get_edid(struct drm_connector *connector, struct drm_dp_mst_topology_mgr *mgr, struct drm_dp_mst_port *port)
+const struct drm_edid *drm_dp_mst_edid_read(struct drm_connector *connector,
+					    struct drm_dp_mst_topology_mgr *mgr,
+					    struct drm_dp_mst_port *port)
 {
-	struct edid *edid = NULL;
+	const struct drm_edid *drm_edid;
 
 	/* we need to search for the port in the mgr in case it's gone */
 	port = drm_dp_mst_topology_get_port_validated(mgr, port);
@@ -4166,12 +4208,41 @@ struct edid *drm_dp_mst_get_edid(struct drm_connector *connector, struct drm_dp_
 		return NULL;
 
 	if (port->cached_edid)
-		edid = drm_edid_duplicate(port->cached_edid);
-	else {
-		edid = drm_get_edid(connector, &port->aux.ddc);
-	}
-	port->has_audio = drm_detect_monitor_audio(edid);
+		drm_edid = drm_edid_dup(port->cached_edid);
+	else
+		drm_edid = drm_edid_read_ddc(connector, &port->aux.ddc);
+
 	drm_dp_mst_topology_put_port(port);
+
+	return drm_edid;
+}
+EXPORT_SYMBOL(drm_dp_mst_edid_read);
+
+/**
+ * drm_dp_mst_get_edid() - get EDID for an MST port
+ * @connector: toplevel connector to get EDID for
+ * @mgr: manager for this port
+ * @port: unverified pointer to a port.
+ *
+ * This function is deprecated; please use drm_dp_mst_edid_read() instead.
+ *
+ * This returns an EDID for the port connected to a connector,
+ * It validates the pointer still exists so the caller doesn't require a
+ * reference.
+ */
+struct edid *drm_dp_mst_get_edid(struct drm_connector *connector,
+				 struct drm_dp_mst_topology_mgr *mgr,
+				 struct drm_dp_mst_port *port)
+{
+	const struct drm_edid *drm_edid;
+	struct edid *edid;
+
+	drm_edid = drm_dp_mst_edid_read(connector, mgr, port);
+
+	edid = drm_edid_duplicate(drm_edid_raw(drm_edid));
+
+	drm_edid_free(drm_edid);
+
 	return edid;
 }
 EXPORT_SYMBOL(drm_dp_mst_get_edid);