Merge tag 'drm-for-v4.16' of git://people.freedesktop.org/~airlied/linux

Pull drm updates from Dave Airlie:
 "This seems to have been a comparatively quieter merge window, I assume
  due to holidays etc. The "biggest" change is AMD header cleanups, which
  merge/remove a bunch of them. The AMD gpu scheduler is now being made generic
  with the etnaviv driver wanting to reuse the code, hopefully other drivers
  can go in the same direction.

  Otherwise it's the usual lots of stuff in i915/amdgpu, not so much stuff
  elsewhere.

  Core:
   - Add .last_close and .output_poll_changed helpers to reduce driver footprints
   - Fix plane clipping
   - Improved debug printing support
   - Add panel orientation property
   - Update edid derived properties at edid setting
   - Reduction in fbdev driver footprint
   - Move amdgpu scheduler into core for other drivers to use.

  i915:
   - Selftest and IGT improvements
   - Fast boot prep work on IPS, pipe config
   - HW workarounds for Cannonlake, Geminilake
   - Cannonlake clock and HDMI2.0 fixes
   - GPU cache invalidation and context switch improvements
   - Display planes cleanup
   - New PMU interface for perf queries
   - New firmware support for KBL/SKL
   - Geminilake HW workaround for perforamce
   - Coffeelake stolen memory improvements
   - GPU reset robustness work
   - Cannonlake horizontal plane flipping
   - GVT work

  amdgpu/radeon:
   - RV and Vega header file cleanups (lots of lines gone!)
   - TTM operation context support
   - 48-bit GPUVM support for Vega/RV
   - ECC support for Vega
   - Resizeable BAR support
   - Multi-display sync support
   - Enable swapout for reserved BOs during allocation
   - S3 fixes on Raven
   - GPU reset cleanup and fixes
   - 2+1 level GPU page table

  amdkfd:
   - GFX7/8 SDMA user queues support
   - Hardware scheduling for multiple processes
   - dGPU prep work

  rcar:
   - Added R8A7743/5 support
   - System suspend/resume support

  sun4i:
   - Multi-plane support for YUV formats
   - A83T and LVDS support

  msm:
   - Devfreq support for GPU

  tegra:
   - Prep work for adding Tegra186 support
   - Tegra186 HDMI support
   - HDMI2.0 and zpos support by using generic helpers

  tilcdc:
   - Misc fixes

  omapdrm:
   - Support memory bandwidth limits
   - DSI command mode panel cleanups
   - DMM error handling

  exynos:
   - drop the old IPP subdriver.

  etnaviv:
   - Occlusion query fixes
   - Job handling fixes
   - Prep work for hooking in gpu scheduler

  armada:
   - Move closer to atomic modesetting
   - Allow disabling primary plane if overlay is full screen

  imx:
   - Format modifier support
   - Add tile prefetch to PRE
   - Runtime PM support for PRG

  ast:
   - fix LUT loading"

* tag 'drm-for-v4.16' of git://people.freedesktop.org/~airlied/linux: (1471 commits)
  drm/ast: Load lut in crtc_commit
  drm: Check for lessee in DROP_MASTER ioctl
  drm: fix gpu scheduler link order
  drm/amd/display: Demote error print to debug print when ATOM impl missing
  dma-buf: fix reservation_object_wait_timeout_rcu once more v2
  drm/amdgpu: Avoid leaking PM domain on driver unbind (v2)
  drm/amd/amdgpu: Add Polaris version check
  drm/amdgpu: Reenable manual GPU reset from sysfs
  drm/amdgpu: disable MMHUB power gating on raven
  drm/ttm: Don't unreserve swapped BOs that were previously reserved
  drm/ttm: Don't add swapped BOs to swap-LRU list
  drm/amdgpu: only check for ECC on Vega10
  drm/amd/powerplay: Fix smu_table_entry.handle type
  drm/ttm: add VADDR_FLAG_UPDATED_COUNT to correctly update dma_page global count
  drm: Fix PANEL_ORIENTATION_QUIRKS breaking the Kconfig DRM menuconfig
  drm/radeon: fill in rb backend map on evergreen/ni.
  drm/amdgpu/gfx9: fix ngg enablement to clear gds reserved memory (v2)
  drm/ttm: only free pages rather than update global memory count together
  drm/amdgpu: fix CPU based VM updates
  drm/amdgpu: fix typo in amdgpu_vce_validate_bo
  ...

1 files changed, 76 insertions, 34 deletions

diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index cb487148359a..ddd537914575 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -3398,6 +3398,7 @@ static int
 do_hdmi_vsdb_modes(struct drm_connector *connector, const u8 *db, u8 len,
 		   const u8 *video_db, u8 video_len)
 {
+	struct drm_display_info *info = &connector->display_info;
 	int modes = 0, offset = 0, i, multi_present = 0, multi_len;
 	u8 vic_len, hdmi_3d_len = 0;
 	u16 mask;
@@ -3525,6 +3526,8 @@ do_hdmi_vsdb_modes(struct drm_connector *connector, const u8 *db, u8 len,
 	}
 
 out:
+	if (modes > 0)
+		info->has_hdmi_infoframe = true;
 	return modes;
 }
 
@@ -3761,8 +3764,8 @@ drm_parse_hdmi_vsdb_audio(struct drm_connector *connector, const u8 *db)
 {
 	u8 len = cea_db_payload_len(db);
 
-	if (len >= 6)
-		connector->eld[5] |= (db[6] >> 7) << 1;  /* Supports_AI */
+	if (len >= 6 && (db[6] & (1 << 7)))
+		connector->eld[DRM_ELD_SAD_COUNT_CONN_TYPE] |= DRM_ELD_SUPPORTS_AI;
 	if (len >= 8) {
 		connector->latency_present[0] = db[8] >> 7;
 		connector->latency_present[1] = (db[8] >> 6) & 1;
@@ -3834,16 +3837,27 @@ void drm_edid_get_monitor_name(struct edid *edid, char *name, int bufsize)
 }
 EXPORT_SYMBOL(drm_edid_get_monitor_name);
 
-/**
+static void clear_eld(struct drm_connector *connector)
+{
+	memset(connector->eld, 0, sizeof(connector->eld));
+
+	connector->latency_present[0] = false;
+	connector->latency_present[1] = false;
+	connector->video_latency[0] = 0;
+	connector->audio_latency[0] = 0;
+	connector->video_latency[1] = 0;
+	connector->audio_latency[1] = 0;
+}
+
+/*
  * drm_edid_to_eld - build ELD from EDID
  * @connector: connector corresponding to the HDMI/DP sink
  * @edid: EDID to parse
  *
  * Fill the ELD (EDID-Like Data) buffer for passing to the audio driver. The
- * Conn_Type, HDCP and Port_ID ELD fields are left for the graphics driver to
- * fill in.
+ * HDCP and Port_ID ELD fields are left for the graphics driver to fill in.
  */
-void drm_edid_to_eld(struct drm_connector *connector, struct edid *edid)
+static void drm_edid_to_eld(struct drm_connector *connector, struct edid *edid)
 {
 	uint8_t *eld = connector->eld;
 	u8 *cea;
@@ -3852,14 +3866,7 @@ void drm_edid_to_eld(struct drm_connector *connector, struct edid *edid)
 	int mnl;
 	int dbl;
 
-	memset(eld, 0, sizeof(connector->eld));
-
-	connector->latency_present[0] = false;
-	connector->latency_present[1] = false;
-	connector->video_latency[0] = 0;
-	connector->audio_latency[0] = 0;
-	connector->video_latency[1] = 0;
-	connector->audio_latency[1] = 0;
+	clear_eld(connector);
 
 	if (!edid)
 		return;
@@ -3870,17 +3877,18 @@ void drm_edid_to_eld(struct drm_connector *connector, struct edid *edid)
 		return;
 	}
 
-	mnl = get_monitor_name(edid, eld + 20);
+	mnl = get_monitor_name(edid, &eld[DRM_ELD_MONITOR_NAME_STRING]);
+	DRM_DEBUG_KMS("ELD monitor %s\n", &eld[DRM_ELD_MONITOR_NAME_STRING]);
 
-	eld[4] = (cea[1] << 5) | mnl;
-	DRM_DEBUG_KMS("ELD monitor %s\n", eld + 20);
+	eld[DRM_ELD_CEA_EDID_VER_MNL] = cea[1] << DRM_ELD_CEA_EDID_VER_SHIFT;
+	eld[DRM_ELD_CEA_EDID_VER_MNL] |= mnl;
 
-	eld[0] = 2 << 3;		/* ELD version: 2 */
+	eld[DRM_ELD_VER] = DRM_ELD_VER_CEA861D;
 
-	eld[16] = edid->mfg_id[0];
-	eld[17] = edid->mfg_id[1];
-	eld[18] = edid->prod_code[0];
-	eld[19] = edid->prod_code[1];
+	eld[DRM_ELD_MANUFACTURER_NAME0] = edid->mfg_id[0];
+	eld[DRM_ELD_MANUFACTURER_NAME1] = edid->mfg_id[1];
+	eld[DRM_ELD_PRODUCT_CODE0] = edid->prod_code[0];
+	eld[DRM_ELD_PRODUCT_CODE1] = edid->prod_code[1];
 
 	if (cea_revision(cea) >= 3) {
 		int i, start, end;
@@ -3901,14 +3909,14 @@ void drm_edid_to_eld(struct drm_connector *connector, struct edid *edid)
 				/* Audio Data Block, contains SADs */
 				sad_count = min(dbl / 3, 15 - total_sad_count);
 				if (sad_count >= 1)
-					memcpy(eld + 20 + mnl + total_sad_count * 3,
+					memcpy(&eld[DRM_ELD_CEA_SAD(mnl, total_sad_count)],
 					       &db[1], sad_count * 3);
 				total_sad_count += sad_count;
 				break;
 			case SPEAKER_BLOCK:
 				/* Speaker Allocation Data Block */
 				if (dbl >= 1)
-					eld[7] = db[1];
+					eld[DRM_ELD_SPEAKER] = db[1];
 				break;
 			case VENDOR_BLOCK:
 				/* HDMI Vendor-Specific Data Block */
@@ -3920,7 +3928,13 @@ void drm_edid_to_eld(struct drm_connector *connector, struct edid *edid)
 			}
 		}
 	}
-	eld[5] |= total_sad_count << 4;
+	eld[DRM_ELD_SAD_COUNT_CONN_TYPE] |= total_sad_count << DRM_ELD_SAD_COUNT_SHIFT;
+
+	if (connector->connector_type == DRM_MODE_CONNECTOR_DisplayPort ||
+	    connector->connector_type == DRM_MODE_CONNECTOR_eDP)
+		eld[DRM_ELD_SAD_COUNT_CONN_TYPE] |= DRM_ELD_CONN_TYPE_DP;
+	else
+		eld[DRM_ELD_SAD_COUNT_CONN_TYPE] |= DRM_ELD_CONN_TYPE_HDMI;
 
 	eld[DRM_ELD_BASELINE_ELD_LEN] =
 		DIV_ROUND_UP(drm_eld_calc_baseline_block_size(eld), 4);
@@ -3928,7 +3942,6 @@ void drm_edid_to_eld(struct drm_connector *connector, struct edid *edid)
 	DRM_DEBUG_KMS("ELD size %d, SAD count %d\n",
 		      drm_eld_size(eld), total_sad_count);
 }
-EXPORT_SYMBOL(drm_edid_to_eld);
 
 /**
  * drm_edid_to_sad - extracts SADs from EDID
@@ -4238,6 +4251,8 @@ static void drm_parse_hdmi_forum_vsdb(struct drm_connector *connector,
 	struct drm_display_info *display = &connector->display_info;
 	struct drm_hdmi_info *hdmi = &display->hdmi;
 
+	display->has_hdmi_infoframe = true;
+
 	if (hf_vsdb[6] & 0x80) {
 		hdmi->scdc.supported = true;
 		if (hf_vsdb[6] & 0x40)
@@ -4413,6 +4428,7 @@ drm_reset_display_info(struct drm_connector *connector)
 	info->cea_rev = 0;
 	info->max_tmds_clock = 0;
 	info->dvi_dual = false;
+	info->has_hdmi_infoframe = false;
 
 	info->non_desktop = 0;
 }
@@ -4433,6 +4449,7 @@ u32 drm_add_display_info(struct drm_connector *connector, const struct edid *edi
 	info->cea_rev = 0;
 	info->max_tmds_clock = 0;
 	info->dvi_dual = false;
+	info->has_hdmi_infoframe = false;
 
 	info->non_desktop = !!(quirks & EDID_QUIRK_NON_DESKTOP);
 
@@ -4634,8 +4651,8 @@ static int add_displayid_detailed_modes(struct drm_connector *connector,
  * @edid: EDID data
  *
  * Add the specified modes to the connector's mode list. Also fills out the
- * &drm_display_info structure in @connector with any information which can be
- * derived from the edid.
+ * &drm_display_info structure and ELD in @connector with any information which
+ * can be derived from the edid.
  *
  * Return: The number of modes added or 0 if we couldn't find any.
  */
@@ -4645,14 +4662,18 @@ int drm_add_edid_modes(struct drm_connector *connector, struct edid *edid)
 	u32 quirks;
 
 	if (edid == NULL) {
+		clear_eld(connector);
 		return 0;
 	}
 	if (!drm_edid_is_valid(edid)) {
+		clear_eld(connector);
 		dev_warn(connector->dev->dev, "%s: EDID invalid.\n",
 			 connector->name);
 		return 0;
 	}
 
+	drm_edid_to_eld(connector, edid);
+
 	/*
 	 * CEA-861-F adds ycbcr capability map block, for HDMI 2.0 sinks.
 	 * To avoid multiple parsing of same block, lets parse that map
@@ -4850,6 +4871,11 @@ EXPORT_SYMBOL(drm_hdmi_avi_infoframe_from_display_mode);
  * @mode: DRM display mode
  * @rgb_quant_range: RGB quantization range (Q)
  * @rgb_quant_range_selectable: Sink support selectable RGB quantization range (QS)
+ * @is_hdmi2_sink: HDMI 2.0 sink, which has different default recommendations
+ *
+ * Note that @is_hdmi2_sink can be derived by looking at the
+ * &drm_scdc.supported flag stored in &drm_hdmi_info.scdc,
+ * &drm_display_info.hdmi, which can be found in &drm_connector.display_info.
  */
 void
 drm_hdmi_avi_infoframe_quant_range(struct hdmi_avi_infoframe *frame,
@@ -4928,6 +4954,7 @@ s3d_structure_from_display_mode(const struct drm_display_mode *mode)
  * drm_hdmi_vendor_infoframe_from_display_mode() - fill an HDMI infoframe with
  * data from a DRM display mode
  * @frame: HDMI vendor infoframe
+ * @connector: the connector
  * @mode: DRM display mode
  *
  * Note that there's is a need to send HDMI vendor infoframes only when using a
@@ -4938,8 +4965,15 @@ s3d_structure_from_display_mode(const struct drm_display_mode *mode)
  */
 int
 drm_hdmi_vendor_infoframe_from_display_mode(struct hdmi_vendor_infoframe *frame,
+					    struct drm_connector *connector,
 					    const struct drm_display_mode *mode)
 {
+	/*
+	 * FIXME: sil-sii8620 doesn't have a connector around when
+	 * we need one, so we have to be prepared for a NULL connector.
+	 */
+	bool has_hdmi_infoframe = connector ?
+		connector->display_info.has_hdmi_infoframe : false;
 	int err;
 	u32 s3d_flags;
 	u8 vic;
@@ -4947,11 +4981,21 @@ drm_hdmi_vendor_infoframe_from_display_mode(struct hdmi_vendor_infoframe *frame,
 	if (!frame || !mode)
 		return -EINVAL;
 
+	if (!has_hdmi_infoframe)
+		return -EINVAL;
+
 	vic = drm_match_hdmi_mode(mode);
 	s3d_flags = mode->flags & DRM_MODE_FLAG_3D_MASK;
 
-	if (!vic && !s3d_flags)
-		return -EINVAL;
+	/*
+	 * Even if it's not absolutely necessary to send the infoframe
+	 * (ie.vic==0 and s3d_struct==0) we will still send it if we
+	 * know that the sink can handle it. This is based on a
+	 * suggestion in HDMI 2.0 Appendix F. Apparently some sinks
+	 * have trouble realizing that they shuld switch from 3D to 2D
+	 * mode if the source simply stops sending the infoframe when
+	 * it wants to switch from 3D to 2D.
+	 */
 
 	if (vic && s3d_flags)
 		return -EINVAL;
@@ -4960,10 +5004,8 @@ drm_hdmi_vendor_infoframe_from_display_mode(struct hdmi_vendor_infoframe *frame,
 	if (err < 0)
 		return err;
 
-	if (vic)
-		frame->vic = vic;
-	else
-		frame->s3d_struct = s3d_structure_from_display_mode(mode);
+	frame->vic = vic;
+	frame->s3d_struct = s3d_structure_from_display_mode(mode);
 
 	return 0;
 }