drm/kmb: Enable LCD DMA for low TVDDCV

There's an undocumented dependency between LCD layer enable bits [2-5]
and the AXI pipelined read enable bit [28] in the LCD_CONTROL register.
The proper order of operation is:

1) Clear AXI pipelined read enable bit
2) Set LCD layers
3) Set AXI pipelined read enable bit

With this update, LCD can start DMA when TVDDCV is reduced down to 700mV.

Fixes: 7f7b96a8a0a1 ("drm/kmb: Add support for KeemBay Display")
Signed-off-by: Edmund Dea <edmund.j.dea@intel.com>
Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210728003126.1425028-1-anitha.chrisanthus@intel.com

1 files changed, 13 insertions, 2 deletions

diff --git a/drivers/gpu/drm/kmb/kmb_plane.c b/drivers/gpu/drm/kmb/kmb_plane.c
index d5b6195856d1..ecee6782612d 100644
--- a/drivers/gpu/drm/kmb/kmb_plane.c
+++ b/drivers/gpu/drm/kmb/kmb_plane.c
@@ -427,8 +427,14 @@ static void kmb_plane_atomic_update(struct drm_plane *plane,
 
 	kmb_set_bitmask_lcd(kmb, LCD_CONTROL, ctrl);
 
-	/* FIXME no doc on how to set output format,these values are
-	 * taken from the Myriadx tests
+	/* Enable pipeline AXI read transactions for the DMA
+	 * after setting graphics layers. This must be done
+	 * in a separate write cycle.
+	 */
+	kmb_set_bitmask_lcd(kmb, LCD_CONTROL, LCD_CTRL_PIPELINE_DMA);
+
+	/* FIXME no doc on how to set output format, these values are taken
+	 * from the Myriadx tests
 	 */
 	out_format |= LCD_OUTF_FORMAT_RGB888;
 
@@ -526,6 +532,11 @@ struct kmb_plane *kmb_plane_init(struct drm_device *drm)
 		plane->id = i;
 	}
 
+	/* Disable pipeline AXI read transactions for the DMA
+	 * prior to setting graphics layers
+	 */
+	kmb_clr_bitmask_lcd(kmb, LCD_CONTROL, LCD_CTRL_PIPELINE_DMA);
+
 	return primary;
 cleanup:
 	drmm_kfree(drm, plane);