Merge tag 'drm-misc-next-2022-08-20-1' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for v6.1:

UAPI Changes:

Cross-subsystem Changes:
- DMA-buf: documentation updates.
- Assorted small fixes to vga16fb
- Fix fbdev drivers to use the aperture helpers.
- Make removal of conflicting drivers work correctly without fbdev enabled.

Core Changes:
- bridge, scheduler, dp-mst: Assorted small fixes.
- Add more format helpers to fourcc, and use it to replace the cpp usage.
- Add DRM_FORMAT_Cxx, DRM_FORMAT_Rxx (single channel), and DRM_FORMAT_Dxx
  ("darkness", inverted single channel)
- Add packed AYUV8888 and XYUV8888 formats.
- Assorted documentation updates.
- Rename ttm_bo_init to ttm_bo_init_validate.
- Allow TTM bo's to exist without backing store.
- Convert drm selftests to kunit.
- Add managed init functions for (panel) bridge, crtc, encoder and connector.
- Fix endianness handling in various format conversion helpers.
- Make tests pass on big-endian platforms, and add test for rgb888 -> rgb565
- Move DRM_PLANE_HELPER_NO_SCALING to atomic helpers and rename, so
  drm_plane_helper is no longer needed in most drivers.
- Use idr_init_base instead of idr_init.
- Rename FB and GEM CMA helpers to DMA helpers.
- Rework XRGB8888 related conversion helpers, and add drm_fb_blit() that
  takes a iosys_map. Make drm_fb_memcpy take an iosys_map too.
- Move edid luminance calculation to core, and use it in i915.

Driver Changes:
- bridge/{adv7511,ti-sn65dsi86,parade-ps8640}, panel/{simple,nt35510,tc358767},
  nouveau, sun4i, mipi-dsi, mgag200, bochs, arm, komeda, vmwgfx, pl111:
  Assorted small fixes and doc updates.
- vc4: Rework hdmi power up, and depend on PM.
- panel/simple: Add Samsung LTL101AL01.
- ingenic: Add JZ4760(B) support, avoid a modeset when sharpness property
  is unchanged, and use the new PM ops.
- Revert some amdgpu commits that cause garbaged graphics when starting
  X, and reapply them with the real problem fixed.
- Completely rework vc4 init to use managed helpers.
- Rename via_drv to via_dri1, and move all stuff there only used by the
  dri1 implementation in preperation for atomic modeset.
- Use regmap bulk write in ssd130x.
- Power sequence and clock updates to it6505.
- Split panel-sitrox-st7701  init sequence and rework mode programming code.
- virtio: Improve error and edge conditions handling, and convert to use managed
  helpers.
- Add Samsung LTL101AL01, B120XAN01.0, R140NWF5 RH, DMT028VGHMCMI-1A T, panels.
- Add generic fbdev support to komeda.
- Split mgag200 modeset handling to make it more model-specific.
- Convert simpledrm to use atomic helpers.
- Improve udl suspend/disconnect handling.

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/f0c71766-61e8-19b7-763a-5fbcdefc633d@linux.intel.com

1 files changed, 13 insertions, 40 deletions

diff --git a/drivers/gpu/drm/virtio/virtgpu_drv.c b/drivers/gpu/drm/virtio/virtgpu_drv.c
index 5f25a8d15464..0035affc3e59 100644
--- a/drivers/gpu/drm/virtio/virtgpu_drv.c
+++ b/drivers/gpu/drm/virtio/virtgpu_drv.c
@@ -46,12 +46,11 @@ static int virtio_gpu_modeset = -1;
 MODULE_PARM_DESC(modeset, "Disable/Enable modesetting");
 module_param_named(modeset, virtio_gpu_modeset, int, 0400);
 
-static int virtio_gpu_pci_quirk(struct drm_device *dev, struct virtio_device *vdev)
+static int virtio_gpu_pci_quirk(struct drm_device *dev)
 {
-	struct pci_dev *pdev = to_pci_dev(vdev->dev.parent);
+	struct pci_dev *pdev = to_pci_dev(dev->dev);
 	const char *pname = dev_name(&pdev->dev);
 	bool vga = (pdev->class >> 8) == PCI_CLASS_DISPLAY_VGA;
-	char unique[20];
 	int ret;
 
 	DRM_INFO("pci: %s detected at %s\n",
@@ -63,39 +62,7 @@ static int virtio_gpu_pci_quirk(struct drm_device *dev, struct virtio_device *vd
 			return ret;
 	}
 
-	/*
-	 * Normally the drm_dev_set_unique() call is done by core DRM.
-	 * The following comment covers, why virtio cannot rely on it.
-	 *
-	 * Unlike the other virtual GPU drivers, virtio abstracts the
-	 * underlying bus type by using struct virtio_device.
-	 *
-	 * Hence the dev_is_pci() check, used in core DRM, will fail
-	 * and the unique returned will be the virtio_device "virtio0",
-	 * while a "pci:..." one is required.
-	 *
-	 * A few other ideas were considered:
-	 * - Extend the dev_is_pci() check [in drm_set_busid] to
-	 *   consider virtio.
-	 *   Seems like a bigger hack than what we have already.
-	 *
-	 * - Point drm_device::dev to the parent of the virtio_device
-	 *   Semantic changes:
-	 *   * Using the wrong device for i2c, framebuffer_alloc and
-	 *     prime import.
-	 *   Visual changes:
-	 *   * Helpers such as DRM_DEV_ERROR, dev_info, drm_printer,
-	 *     will print the wrong information.
-	 *
-	 * We could address the latter issues, by introducing
-	 * drm_device::bus_dev, ... which would be used solely for this.
-	 *
-	 * So for the moment keep things as-is, with a bulky comment
-	 * for the next person who feels like removing this
-	 * drm_dev_set_unique() quirk.
-	 */
-	snprintf(unique, sizeof(unique), "pci:%s", pname);
-	return drm_dev_set_unique(dev, unique);
+	return 0;
 }
 
 static int virtio_gpu_probe(struct virtio_device *vdev)
@@ -109,18 +76,24 @@ static int virtio_gpu_probe(struct virtio_device *vdev)
 	if (virtio_gpu_modeset == 0)
 		return -EINVAL;
 
-	dev = drm_dev_alloc(&driver, &vdev->dev);
+	/*
+	 * The virtio-gpu device is a virtual device that doesn't have DMA
+	 * ops assigned to it, nor DMA mask set and etc. Its parent device
+	 * is actual GPU device we want to use it for the DRM's device in
+	 * order to benefit from using generic DRM APIs.
+	 */
+	dev = drm_dev_alloc(&driver, vdev->dev.parent);
 	if (IS_ERR(dev))
 		return PTR_ERR(dev);
 	vdev->priv = dev;
 
-	if (!strcmp(vdev->dev.parent->bus->name, "pci")) {
-		ret = virtio_gpu_pci_quirk(dev, vdev);
+	if (dev_is_pci(vdev->dev.parent)) {
+		ret = virtio_gpu_pci_quirk(dev);
 		if (ret)
 			goto err_free;
 	}
 
-	ret = virtio_gpu_init(dev);
+	ret = virtio_gpu_init(vdev, dev);
 	if (ret)
 		goto err_free;