hwmon: (asus_wmi_ec_sensors) Support B550 Asus WMI.

Linux HWMON sensors driver for ASUS motherboards to read
sensors from the embedded controller.

Many ASUS motherboards do not publish all the available
sensors via the Super I/O chip but the missing ones are
available through the embedded controller (EC) registers.

This driver implements reading those sensor data via the
WMI method BREC, which is known to be present in all ASUS
motherboards based on the AMD 500 series chipsets (and
probably is available in other models too). The driver
needs to know exact register addresses for the sensors and
thus support for each motherboard has to be added explicitly.

The EC registers do not provide critical values for the
sensors and as such they are not published to the HWMON.

Supported motherboards:
* PRIME X570-PRO
* Pro WS X570-ACE
* ROG CROSSHAIR VIII HERO
* ROG CROSSHAIR VIII DARK HERO
* ROG CROSSHAIR VIII FORMULA
* ROG STRIX X570-E GAMING
* ROG STRIX B550-I GAMING
* ROG STRIX B550-E GAMING

Co-developed-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Co-developed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Denis Pauk <pauk.denis@gmail.com>
Tested-by: Tor Vic <torvic9@mailbox.org>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>

3 files changed, 634 insertions, 0 deletions

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 36e777de3565..81f5e2ddbdf5 100644
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -2228,6 +2228,18 @@ config SENSORS_ATK0110
 	  This driver can also be built as a module. If so, the module
 	  will be called asus_atk0110.
 
+config SENSORS_ASUS_WMI_EC
+	tristate "ASUS WMI B550/X570"
+	depends on ACPI_WMI
+	help
+	  If you say yes here you get support for the ACPI embedded controller
+	  hardware monitoring interface found in B550/X570 ASUS motherboards.
+	  This driver will provide readings of fans, voltages and temperatures
+	  through the system firmware.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called asus_wmi_sensors_ec.
+
 endif # ACPI
 
 endif # HWMON
diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
index 1ddb26f57a6f..821345e49107 100644
--- a/drivers/hwmon/Makefile
+++ b/drivers/hwmon/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_HWMON_VID)		+= hwmon-vid.o
 # APCI drivers
 obj-$(CONFIG_SENSORS_ACPI_POWER) += acpi_power_meter.o
 obj-$(CONFIG_SENSORS_ATK0110)	+= asus_atk0110.o
+obj-$(CONFIG_SENSORS_ASUS_WMI_EC)	+= asus_wmi_ec_sensors.o
 
 # Native drivers
 # asb100, then w83781d go first, as they can override other drivers' addresses.
diff --git a/drivers/hwmon/asus_wmi_ec_sensors.c b/drivers/hwmon/asus_wmi_ec_sensors.c
new file mode 100644
index 000000000000..f612abc66c89
--- /dev/null
+++ b/drivers/hwmon/asus_wmi_ec_sensors.c
@@ -0,0 +1,621 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * HWMON driver for ASUS B550/X570 motherboards that publish sensor
+ * values via the embedded controller registers.
+ *
+ * Copyright (C) 2021 Eugene Shalygin <eugene.shalygin@gmail.com>
+ * Copyright (C) 2018-2019 Ed Brindley <kernel@maidavale.org>
+ *
+ * EC provides:
+ * - Chipset temperature
+ * - CPU temperature
+ * - Motherboard temperature
+ * - T_Sensor temperature
+ * - VRM temperature
+ * - Water In temperature
+ * - Water Out temperature
+ * - CPU Optional Fan RPM
+ * - Chipset Fan RPM
+ * - Water Flow Fan RPM
+ * - CPU current
+ */
+
+#include <linux/acpi.h>
+#include <linux/dmi.h>
+#include <linux/hwmon.h>
+#include <linux/init.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/nls.h>
+#include <linux/units.h>
+#include <linux/wmi.h>
+
+#include <asm/unaligned.h>
+
+#define ASUSWMI_MONITORING_GUID		"466747A0-70EC-11DE-8A39-0800200C9A66"
+#define ASUSWMI_METHODID_BLOCK_READ_EC	0x42524543 /* BREC */
+/* From the ASUS DSDT source */
+#define ASUSWMI_BREC_REGISTERS_MAX	16
+#define ASUSWMI_MAX_BUF_LEN		128
+#define SENSOR_LABEL_LEN		16
+
+static u32 hwmon_attributes[] = {
+	[hwmon_chip]	= HWMON_C_REGISTER_TZ,
+	[hwmon_temp]	= HWMON_T_INPUT | HWMON_T_LABEL,
+	[hwmon_in]	= HWMON_I_INPUT | HWMON_I_LABEL,
+	[hwmon_curr]	= HWMON_C_INPUT | HWMON_C_LABEL,
+	[hwmon_fan]	= HWMON_F_INPUT | HWMON_F_LABEL,
+};
+
+struct asus_wmi_ec_sensor_address {
+	u8 index;
+	u8 bank;
+	u8 size;
+};
+
+#define MAKE_SENSOR_ADDRESS(size_i, bank_i, index_i) {	\
+	.size = size_i,					\
+	.bank = bank_i,					\
+	.index = index_i,				\
+}
+
+struct ec_sensor_info {
+	struct asus_wmi_ec_sensor_address addr;
+	char label[SENSOR_LABEL_LEN];
+	enum hwmon_sensor_types type;
+};
+
+#define EC_SENSOR(sensor_label, sensor_type, size, bank, index) {	\
+	.addr = MAKE_SENSOR_ADDRESS(size, bank, index),			\
+	.label = sensor_label,						\
+	.type = sensor_type,						\
+}
+
+enum known_ec_sensor {
+	SENSOR_TEMP_CHIPSET,
+	SENSOR_TEMP_CPU,
+	SENSOR_TEMP_MB,
+	SENSOR_TEMP_T_SENSOR,
+	SENSOR_TEMP_VRM,
+	SENSOR_FAN_CPU_OPT,
+	SENSOR_FAN_CHIPSET,
+	SENSOR_FAN_VRM_HS,
+	SENSOR_FAN_WATER_FLOW,
+	SENSOR_CURR_CPU,
+	SENSOR_TEMP_WATER_IN,
+	SENSOR_TEMP_WATER_OUT,
+	SENSOR_MAX
+};
+
+/* All known sensors for ASUS EC controllers */
+static const struct ec_sensor_info known_ec_sensors[] = {
+	[SENSOR_TEMP_CHIPSET]	= EC_SENSOR("Chipset", hwmon_temp, 1, 0x00, 0x3a),
+	[SENSOR_TEMP_CPU]	= EC_SENSOR("CPU", hwmon_temp, 1, 0x00, 0x3b),
+	[SENSOR_TEMP_MB]	= EC_SENSOR("Motherboard", hwmon_temp, 1, 0x00, 0x3c),
+	[SENSOR_TEMP_T_SENSOR]	= EC_SENSOR("T_Sensor", hwmon_temp, 1, 0x00, 0x3d),
+	[SENSOR_TEMP_VRM]	= EC_SENSOR("VRM", hwmon_temp, 1, 0x00, 0x3e),
+	[SENSOR_FAN_CPU_OPT]	= EC_SENSOR("CPU_Opt", hwmon_fan, 2, 0x00, 0xb0),
+	[SENSOR_FAN_VRM_HS]	= EC_SENSOR("VRM HS", hwmon_fan, 2, 0x00, 0xb2),
+	[SENSOR_FAN_CHIPSET]	= EC_SENSOR("Chipset", hwmon_fan, 2, 0x00, 0xb4),
+	[SENSOR_FAN_WATER_FLOW]	= EC_SENSOR("Water_Flow", hwmon_fan, 2, 0x00, 0xbc),
+	[SENSOR_CURR_CPU]	= EC_SENSOR("CPU", hwmon_curr, 1, 0x00, 0xf4),
+	[SENSOR_TEMP_WATER_IN]	= EC_SENSOR("Water_In", hwmon_temp, 1, 0x01, 0x00),
+	[SENSOR_TEMP_WATER_OUT]	= EC_SENSOR("Water_Out", hwmon_temp, 1, 0x01, 0x01),
+};
+
+struct asus_wmi_data {
+	const enum known_ec_sensor known_board_sensors[SENSOR_MAX + 1];
+};
+
+/* boards with EC support */
+static struct asus_wmi_data sensors_board_PW_X570_P = {
+	.known_board_sensors = {
+		SENSOR_TEMP_CHIPSET, SENSOR_TEMP_CPU, SENSOR_TEMP_MB, SENSOR_TEMP_VRM,
+		SENSOR_FAN_CHIPSET,
+		SENSOR_MAX
+	},
+};
+
+static struct asus_wmi_data sensors_board_PW_X570_A = {
+	.known_board_sensors = {
+		SENSOR_TEMP_CHIPSET, SENSOR_TEMP_CPU, SENSOR_TEMP_MB, SENSOR_TEMP_VRM,
+		SENSOR_FAN_CHIPSET,
+		SENSOR_CURR_CPU,
+		SENSOR_MAX
+	},
+};
+
+static struct asus_wmi_data sensors_board_R_C8H = {
+	.known_board_sensors = {
+		SENSOR_TEMP_CHIPSET, SENSOR_TEMP_CPU, SENSOR_TEMP_MB,
+		SENSOR_TEMP_T_SENSOR, SENSOR_TEMP_VRM,
+		SENSOR_TEMP_WATER_IN, SENSOR_TEMP_WATER_OUT,
+		SENSOR_FAN_CPU_OPT, SENSOR_FAN_CHIPSET, SENSOR_FAN_WATER_FLOW,
+		SENSOR_CURR_CPU,
+		SENSOR_MAX
+	},
+};
+
+/* Same as Hero but without chipset fan */
+static struct asus_wmi_data sensors_board_R_C8DH = {
+	.known_board_sensors = {
+		SENSOR_TEMP_CHIPSET, SENSOR_TEMP_CPU, SENSOR_TEMP_MB,
+		SENSOR_TEMP_T_SENSOR, SENSOR_TEMP_VRM,
+		SENSOR_TEMP_WATER_IN, SENSOR_TEMP_WATER_OUT,
+		SENSOR_FAN_CPU_OPT, SENSOR_FAN_WATER_FLOW,
+		SENSOR_CURR_CPU,
+		SENSOR_MAX
+	},
+};
+
+/* Same as Hero but without water */
+static struct asus_wmi_data sensors_board_R_C8F = {
+	.known_board_sensors = {
+		SENSOR_TEMP_CHIPSET, SENSOR_TEMP_CPU, SENSOR_TEMP_MB,
+		SENSOR_TEMP_T_SENSOR, SENSOR_TEMP_VRM,
+		SENSOR_FAN_CPU_OPT, SENSOR_FAN_CHIPSET,
+		SENSOR_CURR_CPU,
+		SENSOR_MAX
+	},
+};
+
+static struct asus_wmi_data sensors_board_RS_B550_E_G = {
+	.known_board_sensors = {
+		SENSOR_TEMP_CHIPSET, SENSOR_TEMP_CPU, SENSOR_TEMP_MB,
+		SENSOR_TEMP_T_SENSOR, SENSOR_TEMP_VRM,
+		SENSOR_FAN_CPU_OPT,
+		SENSOR_MAX
+	},
+};
+
+static struct asus_wmi_data sensors_board_RS_B550_I_G = {
+	.known_board_sensors = {
+		SENSOR_TEMP_CHIPSET, SENSOR_TEMP_CPU, SENSOR_TEMP_MB,
+		SENSOR_TEMP_T_SENSOR, SENSOR_TEMP_VRM,
+		SENSOR_FAN_VRM_HS,
+		SENSOR_CURR_CPU,
+		SENSOR_MAX
+	},
+};
+
+static struct asus_wmi_data sensors_board_RS_X570_E_G = {
+	.known_board_sensors = {
+		SENSOR_TEMP_CHIPSET, SENSOR_TEMP_CPU, SENSOR_TEMP_MB,
+		SENSOR_TEMP_T_SENSOR, SENSOR_TEMP_VRM,
+		SENSOR_FAN_CHIPSET,
+		SENSOR_CURR_CPU,
+		SENSOR_MAX
+	},
+};
+
+#define DMI_EXACT_MATCH_ASUS_BOARD_NAME(name, sensors) {			\
+	.matches = {								\
+		DMI_EXACT_MATCH(DMI_BOARD_VENDOR, "ASUSTeK COMPUTER INC."),	\
+		DMI_EXACT_MATCH(DMI_BOARD_NAME, name),				\
+	},									\
+	.driver_data = sensors,							\
+}
+
+static const struct dmi_system_id asus_wmi_ec_dmi_table[] = {
+	DMI_EXACT_MATCH_ASUS_BOARD_NAME("PRIME X570-PRO", &sensors_board_PW_X570_P),
+	DMI_EXACT_MATCH_ASUS_BOARD_NAME("Pro WS X570-ACE", &sensors_board_PW_X570_A),
+	DMI_EXACT_MATCH_ASUS_BOARD_NAME("ROG CROSSHAIR VIII DARK HERO", &sensors_board_R_C8DH),
+	DMI_EXACT_MATCH_ASUS_BOARD_NAME("ROG CROSSHAIR VIII FORMULA", &sensors_board_R_C8F),
+	DMI_EXACT_MATCH_ASUS_BOARD_NAME("ROG CROSSHAIR VIII HERO", &sensors_board_R_C8H),
+	DMI_EXACT_MATCH_ASUS_BOARD_NAME("ROG STRIX B550-E GAMING", &sensors_board_RS_B550_E_G),
+	DMI_EXACT_MATCH_ASUS_BOARD_NAME("ROG STRIX B550-I GAMING", &sensors_board_RS_B550_I_G),
+	DMI_EXACT_MATCH_ASUS_BOARD_NAME("ROG STRIX X570-E GAMING", &sensors_board_RS_X570_E_G),
+	{}
+};
+MODULE_DEVICE_TABLE(dmi, asus_wmi_ec_dmi_table);
+
+struct ec_sensor {
+	enum known_ec_sensor info_index;
+	long cached_value;
+};
+
+/**
+ * struct asus_wmi_ec_info - sensor info.
+ * @sensors: list of sensors.
+ * @read_arg: UTF-16LE string to pass to BRxx() WMI function.
+ * @read_buffer: decoded output from WMI result.
+ * @nr_sensors: number of board EC sensors.
+ * @nr_registers: number of EC registers to read (sensor might span more than 1 register).
+ * @last_updated: in jiffies.
+ */
+struct asus_wmi_ec_info {
+	struct ec_sensor sensors[SENSOR_MAX];
+	char read_arg[(ASUSWMI_BREC_REGISTERS_MAX * 4 + 1) * 2];
+	u8 read_buffer[ASUSWMI_BREC_REGISTERS_MAX];
+	unsigned int nr_sensors;
+	unsigned int nr_registers;
+	unsigned long last_updated;
+};
+
+struct asus_wmi_sensors {
+	struct asus_wmi_ec_info ec;
+	/* lock access to internal cache */
+	struct mutex lock;
+};
+
+static int asus_wmi_ec_fill_board_sensors(struct asus_wmi_ec_info *ec,
+					  const enum known_ec_sensor *bsi)
+{
+	struct ec_sensor *s = ec->sensors;
+	int i;
+
+	ec->nr_sensors = 0;
+	ec->nr_registers = 0;
+
+	for (i = 0; bsi[i] != SENSOR_MAX; i++) {
+		s[i].info_index = bsi[i];
+		ec->nr_sensors++;
+		ec->nr_registers += known_ec_sensors[bsi[i]].addr.size;
+	}
+
+	return 0;
+}
+
+/*
+ * The next four functions convert to or from BRxx string argument format.
+ * The format of the string is as follows:
+ * - The string consists of two-byte UTF-16LE characters.
+ * - The value of the very first byte in the string is equal to the total
+ *   length of the next string in bytes, thus excluding the first two-byte
+ *   character.
+ * - The rest of the string encodes the pairs of (bank, index) pairs, where
+ *   both values are byte-long (0x00 to 0xFF).
+ * - Numbers are encoded as UTF-16LE hex values.
+ */
+static int asus_wmi_ec_decode_reply_buffer(const u8 *in, u32 length, u8 *out)
+{
+	char buffer[ASUSWMI_MAX_BUF_LEN * 2];
+	u32 len = min_t(u32, get_unaligned_le16(in), length - 2);
+
+	utf16s_to_utf8s((wchar_t *)(in + 2), len / 2, UTF16_LITTLE_ENDIAN, buffer, sizeof(buffer));
+
+	return hex2bin(out, buffer, len / 4);
+}
+
+static void asus_wmi_ec_encode_registers(const u8 *in, u32 len, char *out)
+{
+	char buffer[ASUSWMI_MAX_BUF_LEN * 2];
+
+	bin2hex(buffer, in, len);
+
+	utf8s_to_utf16s(buffer, len * 2, UTF16_LITTLE_ENDIAN, (wchar_t *)(out + 2), len * 2);
+
+	put_unaligned_le16(len * 4, out);
+}
+
+static void asus_wmi_ec_make_block_read_query(struct asus_wmi_ec_info *ec)
+{
+	u8 registers[ASUSWMI_BREC_REGISTERS_MAX * 2];
+	const struct ec_sensor_info *si;
+	int i, j, offset;
+
+	offset = 0;
+	for (i = 0; i < ec->nr_sensors; i++) {
+		si = &known_ec_sensors[ec->sensors[i].info_index];
+		for (j = 0; j < si->addr.size; j++) {
+			registers[offset++] = si->addr.bank;
+			registers[offset++] = si->addr.index + j;
+		}
+	}
+
+	asus_wmi_ec_encode_registers(registers, offset, ec->read_arg);
+}
+
+static int asus_wmi_ec_block_read(u32 method_id, char *query, u8 *out)
+{
+	struct acpi_buffer output = { ACPI_ALLOCATE_BUFFER, NULL };
+	struct acpi_buffer input;
+	union acpi_object *obj;
+	acpi_status status;
+	int ret;
+
+	/* The first byte of the BRxx() argument string has to be the string size. */
+	input.length = query[0] + 2;
+	input.pointer = query;
+	status = wmi_evaluate_method(ASUSWMI_MONITORING_GUID, 0, method_id, &input, &output);
+	if (ACPI_FAILURE(status))
+		return -EIO;
+
+	obj = output.pointer;
+	if (!obj)
+		return -EIO;
+
+	if (obj->type != ACPI_TYPE_BUFFER || obj->buffer.length < 2) {
+		ret = -EIO;
+		goto out_free_obj;
+	}
+
+	ret = asus_wmi_ec_decode_reply_buffer(obj->buffer.pointer, obj->buffer.length, out);
+
+out_free_obj:
+	ACPI_FREE(obj);
+	return ret;
+}
+
+static inline long get_sensor_value(const struct ec_sensor_info *si, u8 *data)
+{
+	switch (si->addr.size) {
+	case 1:
+		return *data;
+	case 2:
+		return get_unaligned_be16(data);
+	case 4:
+		return get_unaligned_be32(data);
+	default:
+		return 0;
+	}
+}
+
+static void asus_wmi_ec_update_ec_sensors(struct asus_wmi_ec_info *ec)
+{
+	const struct ec_sensor_info *si;
+	struct ec_sensor *s;
+	u8 i_sensor;
+	u8 *data;
+
+	data = ec->read_buffer;
+	for (i_sensor = 0; i_sensor < ec->nr_sensors; i_sensor++) {
+		s = &ec->sensors[i_sensor];
+		si = &known_ec_sensors[s->info_index];
+		s->cached_value = get_sensor_value(si, data);
+		data += si->addr.size;
+	}
+}
+
+static long asus_wmi_ec_scale_sensor_value(long value, int data_type)
+{
+	switch (data_type) {
+	case hwmon_curr:
+	case hwmon_temp:
+	case hwmon_in:
+		return value * MILLI;
+	default:
+		return value;
+	}
+}
+
+static int asus_wmi_ec_find_sensor_index(const struct asus_wmi_ec_info *ec,
+					 enum hwmon_sensor_types type, int channel)
+{
+	int i;
+
+	for (i = 0; i < ec->nr_sensors; i++) {
+		if (known_ec_sensors[ec->sensors[i].info_index].type == type) {
+			if (channel == 0)
+				return i;
+
+			channel--;
+		}
+	}
+	return -EINVAL;
+}
+
+static int asus_wmi_ec_get_cached_value_or_update(struct asus_wmi_sensors *sensor_data,
+						  int sensor_index,
+						  long *value)
+{
+	struct asus_wmi_ec_info *ec = &sensor_data->ec;
+	int ret = 0;
+
+	mutex_lock(&sensor_data->lock);
+
+	if (time_after(jiffies, ec->last_updated + HZ)) {
+		ret = asus_wmi_ec_block_read(ASUSWMI_METHODID_BLOCK_READ_EC,
+					     ec->read_arg, ec->read_buffer);
+		if (ret)
+			goto unlock;
+
+		asus_wmi_ec_update_ec_sensors(ec);
+		ec->last_updated = jiffies;
+	}
+
+	*value = ec->sensors[sensor_index].cached_value;
+
+unlock:
+	mutex_unlock(&sensor_data->lock);
+
+	return ret;
+}
+
+/* Now follow the functions that implement the hwmon interface */
+
+static int asus_wmi_ec_hwmon_read(struct device *dev, enum hwmon_sensor_types type,
+				  u32 attr, int channel, long *val)
+{
+	struct asus_wmi_sensors *sensor_data = dev_get_drvdata(dev);
+	struct asus_wmi_ec_info *ec = &sensor_data->ec;
+	int ret, sidx, info_index;
+	long value = 0;
+
+	sidx = asus_wmi_ec_find_sensor_index(ec, type, channel);
+	if (sidx < 0)
+		return sidx;
+
+	ret = asus_wmi_ec_get_cached_value_or_update(sensor_data, sidx, &value);
+	if (ret)
+		return ret;
+
+	info_index = ec->sensors[sidx].info_index;
+	*val = asus_wmi_ec_scale_sensor_value(value, known_ec_sensors[info_index].type);
+
+	return ret;
+}
+
+static int asus_wmi_ec_hwmon_read_string(struct device *dev,
+					 enum hwmon_sensor_types type, u32 attr,
+					 int channel, const char **str)
+{
+	struct asus_wmi_sensors *sensor_data = dev_get_drvdata(dev);
+	struct asus_wmi_ec_info *ec = &sensor_data->ec;
+	int sensor_index;
+
+	sensor_index = asus_wmi_ec_find_sensor_index(ec, type, channel);
+	*str = known_ec_sensors[ec->sensors[sensor_index].info_index].label;
+
+	return 0;
+}
+
+static umode_t asus_wmi_ec_hwmon_is_visible(const void *drvdata,
+					    enum hwmon_sensor_types type, u32 attr,
+					    int channel)
+{
+	const struct asus_wmi_sensors *sensor_data = drvdata;
+	const struct asus_wmi_ec_info *ec = &sensor_data->ec;
+	int index;
+
+	index = asus_wmi_ec_find_sensor_index(ec, type, channel);
+
+	return index < 0 ? 0 : 0444;
+}
+
+static int asus_wmi_hwmon_add_chan_info(struct hwmon_channel_info *asus_wmi_hwmon_chan,
+					struct device *dev, int num,
+					enum hwmon_sensor_types type, u32 config)
+{
+	u32 *cfg;
+
+	cfg = devm_kcalloc(dev, num + 1, sizeof(*cfg), GFP_KERNEL);
+	if (!cfg)
+		return -ENOMEM;
+
+	asus_wmi_hwmon_chan->type = type;
+	asus_wmi_hwmon_chan->config = cfg;
+	memset32(cfg, config, num);
+
+	return 0;
+}
+
+static const struct hwmon_ops asus_wmi_ec_hwmon_ops = {
+	.is_visible = asus_wmi_ec_hwmon_is_visible,
+	.read = asus_wmi_ec_hwmon_read,
+	.read_string = asus_wmi_ec_hwmon_read_string,
+};
+
+static struct hwmon_chip_info asus_wmi_ec_chip_info = {
+	.ops = &asus_wmi_ec_hwmon_ops,
+};
+
+static int asus_wmi_ec_configure_sensor_setup(struct device *dev,
+					      const enum known_ec_sensor *bsi)
+{
+	struct asus_wmi_sensors *sensor_data = dev_get_drvdata(dev);
+	struct asus_wmi_ec_info *ec = &sensor_data->ec;
+	struct hwmon_channel_info *asus_wmi_hwmon_chan;
+	const struct hwmon_channel_info **asus_wmi_ci;
+	int nr_count[hwmon_max] = {}, nr_types = 0;
+	const struct hwmon_chip_info *chip_info;
+	const struct ec_sensor_info *si;
+	enum hwmon_sensor_types type;
+	struct device *hwdev;
+	int i, ret;
+
+	ret = asus_wmi_ec_fill_board_sensors(ec, bsi);
+	if (ret)
+		return ret;
+
+	if (!sensor_data->ec.nr_sensors)
+		return -ENODEV;
+
+	for (i = 0; i < ec->nr_sensors; i++) {
+		si = &known_ec_sensors[ec->sensors[i].info_index];
+		if (!nr_count[si->type])
+			nr_types++;
+		nr_count[si->type]++;
+	}
+
+	if (nr_count[hwmon_temp]) {
+		nr_count[hwmon_chip]++;
+		nr_types++;
+	}
+
+	/*
+	 * If we can get values for all the registers in a single query,
+	 * the query will not change from call to call.
+	 */
+	asus_wmi_ec_make_block_read_query(ec);
+
+	asus_wmi_hwmon_chan = devm_kcalloc(dev, nr_types, sizeof(*asus_wmi_hwmon_chan),
+					   GFP_KERNEL);
+	if (!asus_wmi_hwmon_chan)
+		return -ENOMEM;
+
+	asus_wmi_ci = devm_kcalloc(dev, nr_types + 1, sizeof(*asus_wmi_ci), GFP_KERNEL);
+	if (!asus_wmi_ci)
+		return -ENOMEM;
+
+	asus_wmi_ec_chip_info.info = asus_wmi_ci;
+	chip_info = &asus_wmi_ec_chip_info;
+
+	for (type = 0; type < hwmon_max; type++) {
+		if (!nr_count[type])
+			continue;
+
+		ret = asus_wmi_hwmon_add_chan_info(asus_wmi_hwmon_chan, dev,
+						   nr_count[type], type,
+						   hwmon_attributes[type]);
+		if (ret)
+			return ret;
+
+		*asus_wmi_ci++ = asus_wmi_hwmon_chan++;
+	}
+
+	dev_dbg(dev, "board has %d EC sensors that span %d registers",
+		ec->nr_sensors, ec->nr_registers);
+
+	hwdev = devm_hwmon_device_register_with_info(dev, "asus_wmi_ec_sensors",
+						     sensor_data, chip_info, NULL);
+
+	return PTR_ERR_OR_ZERO(hwdev);
+}
+
+static int asus_wmi_probe(struct wmi_device *wdev, const void *context)
+{
+	struct asus_wmi_sensors *sensor_data;
+	struct asus_wmi_data *board_sensors;
+	const struct dmi_system_id *dmi_id;
+	const enum known_ec_sensor *bsi;
+	struct device *dev = &wdev->dev;
+
+	dmi_id = dmi_first_match(asus_wmi_ec_dmi_table);
+	if (!dmi_id)
+		return -ENODEV;
+
+	board_sensors = dmi_id->driver_data;
+	bsi = board_sensors->known_board_sensors;
+
+	sensor_data = devm_kzalloc(dev, sizeof(*sensor_data), GFP_KERNEL);
+	if (!sensor_data)
+		return -ENOMEM;
+
+	mutex_init(&sensor_data->lock);
+
+	dev_set_drvdata(dev, sensor_data);
+
+	return asus_wmi_ec_configure_sensor_setup(dev, bsi);
+}
+
+static const struct wmi_device_id asus_ec_wmi_id_table[] = {
+	{ ASUSWMI_MONITORING_GUID, NULL },
+	{ }
+};
+
+static struct wmi_driver asus_sensors_wmi_driver = {
+	.driver = {
+		.name = "asus_wmi_ec_sensors",
+	},
+	.id_table = asus_ec_wmi_id_table,
+	.probe = asus_wmi_probe,
+};
+module_wmi_driver(asus_sensors_wmi_driver);
+
+MODULE_AUTHOR("Ed Brindley <kernel@maidavale.org>");
+MODULE_AUTHOR("Eugene Shalygin <eugene.shalygin@gmail.com>");
+MODULE_DESCRIPTION("Asus WMI Sensors Driver");
+MODULE_LICENSE("GPL");