diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2021-02-20 21:36:51 -0800 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2021-02-20 21:36:51 -0800 |
commit | 5d99aa093b566d234b51b7822c67059e2bd3ed8d (patch) | |
tree | d8a00a778014ade58d21f0214243e8b0da7d19f1 /drivers/iio/adc/qcom-vadc-common.c | |
parent | 780607b9731feef575514108fc7956c54180f16e (diff) | |
parent | 4eb839aef182fccf8995ee439fc2b48d43e45918 (diff) |
Merge tag 'staging-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging and IIO driver updates from Greg KH:
"Here is the "big" set of staging and IIO driver patches for 5.12-rc1.
Nothing really huge in here, the number of staging tree patches has
gone down for a bit, maybe there's only so much churn to happen in
here at the moment.
The IIO changes are:
- new drivers
- new DT bindings
- new iio driver features
with full details in the shortlog.
The staging driver patches are just a lot of tiny coding style
cleanups, along with some semi-larger hikey driver cleanups as those
are _almost_ good enough to get out of the staging tree, but will
probably have to wait until 5.13 to have happen.
All of these have been in linux-next with no reported issues"
* tag 'staging-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (189 commits)
staging: hikey9xx: Fix alignment of function parameters
staging: greybus: Fixed a misspelling in hid.c
staging: wimax/i2400m: fix some byte order issues found by sparse
staging: wimax: i2400m: fix some incorrect type warnings
staging: greybus: minor code style fix
staging:wlan-ng: use memdup_user instead of kmalloc/copy_from_user
staging:r8188eu: use IEEE80211_FCTL_* kernel definitions
staging: rtl8192e: remove multiple blank lines
staging: greybus: Fixed alignment issue in hid.c
staging: wfx: remove unused included header files
staging: nvec: minor coding style fix
staging: wimax: Fix some coding style problem
staging: fbtft: add tearing signal detect
staging: vt6656: Fixed issue with alignment in rf.c
staging: qlge: Remove duplicate word in comment
staging: rtl8723bs: remove obsolete commented out code
staging: rtl8723bs: fix function comments to follow kernel-doc
staging: wfx: avoid defining array of flexible struct
staging: rtl8723bs: Replace one-element array with flexible-array member in struct ndis_80211_var_ie
staging: Replace lkml.org links with lore
...
Diffstat (limited to 'drivers/iio/adc/qcom-vadc-common.c')
-rw-r--r-- | drivers/iio/adc/qcom-vadc-common.c | 229 |
1 files changed, 132 insertions, 97 deletions
diff --git a/drivers/iio/adc/qcom-vadc-common.c b/drivers/iio/adc/qcom-vadc-common.c index 5113aaa6ba67..8682cf1e213f 100644 --- a/drivers/iio/adc/qcom-vadc-common.c +++ b/drivers/iio/adc/qcom-vadc-common.c @@ -2,50 +2,61 @@ #include <linux/bug.h> #include <linux/kernel.h> #include <linux/bitops.h> +#include <linux/fixp-arith.h> +#include <linux/iio/adc/qcom-vadc-common.h> #include <linux/math64.h> #include <linux/log2.h> #include <linux/err.h> #include <linux/module.h> #include <linux/units.h> -#include "qcom-vadc-common.h" +/** + * struct vadc_map_pt - Map the graph representation for ADC channel + * @x: Represent the ADC digitized code. + * @y: Represent the physical data which can be temperature, voltage, + * resistance. + */ +struct vadc_map_pt { + s32 x; + s32 y; +}; /* Voltage to temperature */ static const struct vadc_map_pt adcmap_100k_104ef_104fb[] = { - {1758, -40}, - {1742, -35}, - {1719, -30}, - {1691, -25}, - {1654, -20}, - {1608, -15}, - {1551, -10}, - {1483, -5}, - {1404, 0}, - {1315, 5}, - {1218, 10}, - {1114, 15}, - {1007, 20}, - {900, 25}, - {795, 30}, - {696, 35}, - {605, 40}, - {522, 45}, - {448, 50}, - {383, 55}, - {327, 60}, - {278, 65}, - {237, 70}, - {202, 75}, - {172, 80}, - {146, 85}, - {125, 90}, - {107, 95}, - {92, 100}, - {79, 105}, - {68, 110}, - {59, 115}, - {51, 120}, - {44, 125} + {1758, -40000 }, + {1742, -35000 }, + {1719, -30000 }, + {1691, -25000 }, + {1654, -20000 }, + {1608, -15000 }, + {1551, -10000 }, + {1483, -5000 }, + {1404, 0 }, + {1315, 5000 }, + {1218, 10000 }, + {1114, 15000 }, + {1007, 20000 }, + {900, 25000 }, + {795, 30000 }, + {696, 35000 }, + {605, 40000 }, + {522, 45000 }, + {448, 50000 }, + {383, 55000 }, + {327, 60000 }, + {278, 65000 }, + {237, 70000 }, + {202, 75000 }, + {172, 80000 }, + {146, 85000 }, + {125, 90000 }, + {107, 95000 }, + {92, 100000 }, + {79, 105000 }, + {68, 110000 }, + {59, 115000 }, + {51, 120000 }, + {44, 125000 } }; /* @@ -90,18 +101,18 @@ static const struct vadc_map_pt adcmap_100k_104ef_104fb_1875_vref[] = { }; static const struct vadc_map_pt adcmap7_die_temp[] = { - { 433700, 1967}, - { 473100, 1964}, - { 512400, 1957}, - { 551500, 1949}, - { 590500, 1940}, - { 629300, 1930}, - { 667900, 1921}, - { 706400, 1910}, - { 744600, 1896}, - { 782500, 1878}, - { 820100, 1859}, - { 857300, 0}, + { 857300, 160000 }, + { 820100, 140000 }, + { 782500, 120000 }, + { 744600, 100000 }, + { 706400, 80000 }, + { 667900, 60000 }, + { 629300, 40000 }, + { 590500, 20000 }, + { 551500, 0 }, + { 512400, -20000 }, + { 473100, -40000 }, + { 433700, -60000 }, }; /* @@ -278,6 +289,18 @@ static const struct vadc_map_pt adcmap7_100k[] = { { 2420, 130048 } }; +static const struct vadc_prescale_ratio adc5_prescale_ratios[] = { + {.num = 1, .den = 1}, + {.num = 1, .den = 3}, + {.num = 1, .den = 4}, + {.num = 1, .den = 6}, + {.num = 1, .den = 20}, + {.num = 1, .den = 8}, + {.num = 10, .den = 81}, + {.num = 1, .den = 10}, + {.num = 1, .den = 16} +}; + static int qcom_vadc_scale_hw_calib_volt( const struct vadc_prescale_ratio *prescale, const struct adc5_data *data, @@ -323,43 +346,23 @@ static struct qcom_adc5_scale_type scale_adc5_fn[] = { static int qcom_vadc_map_voltage_temp(const struct vadc_map_pt *pts, u32 tablesize, s32 input, int *output) { - bool descending = 1; u32 i = 0; if (!pts) return -EINVAL; - /* Check if table is descending or ascending */ - if (tablesize > 1) { - if (pts[0].x < pts[1].x) - descending = 0; - } - - while (i < tablesize) { - if ((descending) && (pts[i].x < input)) { - /* table entry is less than measured*/ - /* value and table is descending, stop */ - break; - } else if ((!descending) && - (pts[i].x > input)) { - /* table entry is greater than measured*/ - /*value and table is ascending, stop */ - break; - } + while (i < tablesize && pts[i].x > input) i++; - } if (i == 0) { *output = pts[0].y; } else if (i == tablesize) { *output = pts[tablesize - 1].y; } else { - /* result is between search_index and search_index-1 */ /* interpolate linearly */ - *output = (((s32)((pts[i].y - pts[i - 1].y) * - (input - pts[i - 1].x)) / - (pts[i].x - pts[i - 1].x)) + - pts[i - 1].y); + *output = fixp_linear_interpolate(pts[i - 1].x, pts[i - 1].y, + pts[i].x, pts[i].y, + input); } return 0; @@ -415,8 +418,6 @@ static int qcom_vadc_scale_therm(const struct vadc_linear_graph *calib_graph, if (ret) return ret; - *result_mdec *= 1000; - return 0; } @@ -563,33 +564,13 @@ static int qcom_vadc7_scale_hw_calib_die_temp( u16 adc_code, int *result_mdec) { - int voltage, vtemp0, temp, i; + int voltage; voltage = qcom_vadc_scale_code_voltage_factor(adc_code, prescale, data, 1); - if (adcmap7_die_temp[0].x > voltage) { - *result_mdec = DIE_TEMP_ADC7_SCALE_1; - return 0; - } - - if (adcmap7_die_temp[ARRAY_SIZE(adcmap7_die_temp) - 1].x <= voltage) { - *result_mdec = DIE_TEMP_ADC7_MAX; - return 0; - } - - for (i = 0; i < ARRAY_SIZE(adcmap7_die_temp); i++) - if (adcmap7_die_temp[i].x > voltage) - break; - - vtemp0 = adcmap7_die_temp[i - 1].x; - voltage = voltage - vtemp0; - temp = div64_s64(voltage * DIE_TEMP_ADC7_SCALE_FACTOR, - adcmap7_die_temp[i - 1].y); - temp += DIE_TEMP_ADC7_SCALE_1 + (DIE_TEMP_ADC7_SCALE_2 * (i - 1)); - *result_mdec = temp; - - return 0; + return qcom_vadc_map_voltage_temp(adcmap7_die_temp, ARRAY_SIZE(adcmap7_die_temp), + voltage, result_mdec); } static int qcom_vadc_scale_hw_smb_temp( @@ -647,10 +628,12 @@ int qcom_vadc_scale(enum vadc_scale_fn_type scaletype, EXPORT_SYMBOL(qcom_vadc_scale); int qcom_adc5_hw_scale(enum vadc_scale_fn_type scaletype, - const struct vadc_prescale_ratio *prescale, + unsigned int prescale_ratio, const struct adc5_data *data, u16 adc_code, int *result) { + const struct vadc_prescale_ratio *prescale = &adc5_prescale_ratios[prescale_ratio]; + if (!(scaletype >= SCALE_HW_CALIB_DEFAULT && scaletype < SCALE_HW_CALIB_INVALID)) { pr_err("Invalid scale type %d\n", scaletype); @@ -662,6 +645,58 @@ int qcom_adc5_hw_scale(enum vadc_scale_fn_type scaletype, } EXPORT_SYMBOL(qcom_adc5_hw_scale); +int qcom_adc5_prescaling_from_dt(u32 num, u32 den) +{ + unsigned int pre; + + for (pre = 0; pre < ARRAY_SIZE(adc5_prescale_ratios); pre++) + if (adc5_prescale_ratios[pre].num == num && + adc5_prescale_ratios[pre].den == den) + break; + + if (pre == ARRAY_SIZE(adc5_prescale_ratios)) + return -EINVAL; + + return pre; +} +EXPORT_SYMBOL(qcom_adc5_prescaling_from_dt); + +int qcom_adc5_hw_settle_time_from_dt(u32 value, + const unsigned int *hw_settle) +{ + unsigned int i; + + for (i = 0; i < VADC_HW_SETTLE_SAMPLES_MAX; i++) { + if (value == hw_settle[i]) + return i; + } + + return -EINVAL; +} +EXPORT_SYMBOL(qcom_adc5_hw_settle_time_from_dt); + +int qcom_adc5_avg_samples_from_dt(u32 value) +{ + if (!is_power_of_2(value) || value > ADC5_AVG_SAMPLES_MAX) + return -EINVAL; + + return __ffs(value); +} +EXPORT_SYMBOL(qcom_adc5_avg_samples_from_dt); + +int qcom_adc5_decimation_from_dt(u32 value, const unsigned int *decimation) +{ + unsigned int i; + + for (i = 0; i < ADC5_DECIMATION_SAMPLES_MAX; i++) { + if (value == decimation[i]) + return i; + } + + return -EINVAL; +} +EXPORT_SYMBOL(qcom_adc5_decimation_from_dt); + int qcom_vadc_decimation_from_dt(u32 value) { if (!is_power_of_2(value) || value < VADC_DECIMATION_MIN || |