Merge tag 'imx-soc-3.11' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/soc

From Shawn Guo:

imx soc changes for 3.11:

* New SoCs i.MX6 Sololite and Vybrid VF610 support
* imx5 and imx6 clock fixes and additions
* Update clock driver to use of_clk_init() function
* Refactor restart routine mxc_restart() to get it work for DT boot
  as well
* Clean up mxc specific ulpi access ops
* imx defconfig updates

* tag 'imx-soc-3.11' of git://git.linaro.org/people/shawnguo/linux-2.6: (29 commits)
  ARM: imx_v6_v7_defconfig: Enable Vybrid VF610
  ARM: imx_v6_v7_defconfig: Enable imx-wm8962 by default
  ARM: clk-imx6qdl: Add clko1 configuration for imx6qdl-sabresd
  ARM: imx_v6_v7_defconfig: Enable PWM and backlight options
  ARM: imx: Remove mxc specific ulpi access ops
  ARM: imx: add initial support for VF610
  ARM: imx: add VF610 clock support
  ARM: imx_v6_v7_defconfig: enable parallel display
  ARM: imx: clk: No need to initialize phandle struct
  ARM: imx: irq-common: Include header to avoid sparse warning
  ARM: imx: Enable mx6 solo-lite support
  ARM: imx6: use common of_clk_init() call to initialize clocks
  ARM: imx6q: call of_clk_init() to register fixed rate clocks
  ARM: imx: imx_v6_v7_defconfig: Select CONFIG_DRM_IMX_TVE
  ARM: i.MX6: clk: add different DualLite MLB clock config
  ARM i.MX5: Add S/PDIF clocks
  ARM i.MX53: Add SATA clock
  ARM: imx6q: clk: add the eim_slow clock
  ARM: imx: remove MLB PLL from pllv3
  ARM: imx: disable pll8_mlb in mx6q_clks
  ...

Conflicts:
	arch/arm/Kconfig.debug (simple add/add conflict)

Includes an update to 3.10-rc6

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

1 files changed, 24 insertions, 14 deletions

diff --git a/drivers/md/raid1.c b/drivers/md/raid1.c
index 55951182af73..6e17f8181c4b 100644
--- a/drivers/md/raid1.c
+++ b/drivers/md/raid1.c
@@ -417,7 +417,17 @@ static void raid1_end_write_request(struct bio *bio, int error)
 
 		r1_bio->bios[mirror] = NULL;
 		to_put = bio;
-		set_bit(R1BIO_Uptodate, &r1_bio->state);
+		/*
+		 * Do not set R1BIO_Uptodate if the current device is
+		 * rebuilding or Faulty. This is because we cannot use
+		 * such device for properly reading the data back (we could
+		 * potentially use it, if the current write would have felt
+		 * before rdev->recovery_offset, but for simplicity we don't
+		 * check this here.
+		 */
+		if (test_bit(In_sync, &conf->mirrors[mirror].rdev->flags) &&
+		    !test_bit(Faulty, &conf->mirrors[mirror].rdev->flags))
+			set_bit(R1BIO_Uptodate, &r1_bio->state);
 
 		/* Maybe we can clear some bad blocks. */
 		if (is_badblock(conf->mirrors[mirror].rdev,
@@ -870,17 +880,17 @@ static void allow_barrier(struct r1conf *conf)
 	wake_up(&conf->wait_barrier);
 }
 
-static void freeze_array(struct r1conf *conf)
+static void freeze_array(struct r1conf *conf, int extra)
 {
 	/* stop syncio and normal IO and wait for everything to
 	 * go quite.
 	 * We increment barrier and nr_waiting, and then
-	 * wait until nr_pending match nr_queued+1
+	 * wait until nr_pending match nr_queued+extra
 	 * This is called in the context of one normal IO request
 	 * that has failed. Thus any sync request that might be pending
 	 * will be blocked by nr_pending, and we need to wait for
 	 * pending IO requests to complete or be queued for re-try.
-	 * Thus the number queued (nr_queued) plus this request (1)
+	 * Thus the number queued (nr_queued) plus this request (extra)
 	 * must match the number of pending IOs (nr_pending) before
 	 * we continue.
 	 */
@@ -888,7 +898,7 @@ static void freeze_array(struct r1conf *conf)
 	conf->barrier++;
 	conf->nr_waiting++;
 	wait_event_lock_irq_cmd(conf->wait_barrier,
-				conf->nr_pending == conf->nr_queued+1,
+				conf->nr_pending == conf->nr_queued+extra,
 				conf->resync_lock,
 				flush_pending_writes(conf));
 	spin_unlock_irq(&conf->resync_lock);
@@ -1544,8 +1554,8 @@ static int raid1_add_disk(struct mddev *mddev, struct md_rdev *rdev)
 		 * we wait for all outstanding requests to complete.
 		 */
 		synchronize_sched();
-		raise_barrier(conf);
-		lower_barrier(conf);
+		freeze_array(conf, 0);
+		unfreeze_array(conf);
 		clear_bit(Unmerged, &rdev->flags);
 	}
 	md_integrity_add_rdev(rdev, mddev);
@@ -1595,11 +1605,11 @@ static int raid1_remove_disk(struct mddev *mddev, struct md_rdev *rdev)
 			 */
 			struct md_rdev *repl =
 				conf->mirrors[conf->raid_disks + number].rdev;
-			raise_barrier(conf);
+			freeze_array(conf, 0);
 			clear_bit(Replacement, &repl->flags);
 			p->rdev = repl;
 			conf->mirrors[conf->raid_disks + number].rdev = NULL;
-			lower_barrier(conf);
+			unfreeze_array(conf);
 			clear_bit(WantReplacement, &rdev->flags);
 		} else
 			clear_bit(WantReplacement, &rdev->flags);
@@ -2195,7 +2205,7 @@ static void handle_read_error(struct r1conf *conf, struct r1bio *r1_bio)
 	 * frozen
 	 */
 	if (mddev->ro == 0) {
-		freeze_array(conf);
+		freeze_array(conf, 1);
 		fix_read_error(conf, r1_bio->read_disk,
 			       r1_bio->sector, r1_bio->sectors);
 		unfreeze_array(conf);
@@ -2780,8 +2790,8 @@ static int run(struct mddev *mddev)
 		return PTR_ERR(conf);
 
 	if (mddev->queue)
-		blk_queue_max_write_same_sectors(mddev->queue,
-						 mddev->chunk_sectors);
+		blk_queue_max_write_same_sectors(mddev->queue, 0);
+
 	rdev_for_each(rdev, mddev) {
 		if (!mddev->gendisk)
 			continue;
@@ -2963,7 +2973,7 @@ static int raid1_reshape(struct mddev *mddev)
 		return -ENOMEM;
 	}
 
-	raise_barrier(conf);
+	freeze_array(conf, 0);
 
 	/* ok, everything is stopped */
 	oldpool = conf->r1bio_pool;
@@ -2994,7 +3004,7 @@ static int raid1_reshape(struct mddev *mddev)
 	conf->raid_disks = mddev->raid_disks = raid_disks;
 	mddev->delta_disks = 0;
 
-	lower_barrier(conf);
+	unfreeze_array(conf);
 
 	set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
 	md_wakeup_thread(mddev->thread);