diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2022-03-23 18:23:13 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2022-03-23 18:23:13 -0700 |
commit | b4bc93bd76d4da32600795cd323c971f00a2e788 (patch) | |
tree | 8aebc8ae647d83ffa091c89bb164e7c24b0edfa9 /drivers/memory | |
parent | baaa68a9796ef2cadfe5caaf4c730412eda0f31c (diff) | |
parent | 339ac71b233ee9ab5036be3abca0e5df793b5f64 (diff) |
Merge tag 'arm-drivers-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM driver updates from Arnd Bergmann:
"There are a few separately maintained driver subsystems that we merge
through the SoC tree, notable changes are:
- Memory controller updates, mainly for Tegra and Mediatek SoCs, and
clarifications for the memory controller DT bindings
- SCMI firmware interface updates, in particular a new transport
based on OPTEE and support for atomic operations.
- Cleanups to the TEE subsystem, refactoring its memory management
For SoC specific drivers without a separate subsystem, changes include
- Smaller updates and fixes for TI, AT91/SAMA5, Qualcomm and NXP
Layerscape SoCs.
- Driver support for Microchip SAMA5D29, Tesla FSD, Renesas RZ/G2L,
and Qualcomm SM8450.
- Better power management on Mediatek MT81xx, NXP i.MX8MQ and older
NVIDIA Tegra chips"
* tag 'arm-drivers-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (154 commits)
ARM: spear: fix typos in comments
soc/microchip: fix invalid free in mpfs_sys_controller_delete
soc: s4: Add support for power domains controller
dt-bindings: power: add Amlogic s4 power domains bindings
ARM: at91: add support in soc driver for new SAMA5D29
soc: mediatek: mmsys: add sw0_rst_offset in mmsys driver data
dt-bindings: memory: renesas,rpc-if: Document RZ/V2L SoC
memory: emif: check the pointer temp in get_device_details()
memory: emif: Add check for setup_interrupts
dt-bindings: arm: mediatek: mmsys: add support for MT8186
dt-bindings: mediatek: add compatible for MT8186 pwrap
soc: mediatek: pwrap: add pwrap driver for MT8186 SoC
soc: mediatek: mmsys: add mmsys reset control for MT8186
soc: mediatek: mtk-infracfg: Disable ACP on MT8192
soc: ti: k3-socinfo: Add AM62x JTAG ID
soc: mediatek: add MTK mutex support for MT8186
soc: mediatek: mmsys: add mt8186 mmsys routing table
soc: mediatek: pm-domains: Add support for mt8186
dt-bindings: power: Add MT8186 power domains
soc: mediatek: pm-domains: Add support for mt8195
...
Diffstat (limited to 'drivers/memory')
-rw-r--r-- | drivers/memory/brcmstb_dpfe.c | 2 | ||||
-rw-r--r-- | drivers/memory/emif.c | 8 | ||||
-rw-r--r-- | drivers/memory/fsl_ifc.c | 9 | ||||
-rw-r--r-- | drivers/memory/mtk-smi.c | 57 | ||||
-rw-r--r-- | drivers/memory/of_memory.c | 29 | ||||
-rw-r--r-- | drivers/memory/tegra/Kconfig | 1 | ||||
-rw-r--r-- | drivers/memory/tegra/tegra20-emc.c | 2 | ||||
-rw-r--r-- | drivers/memory/tegra/tegra210-emc-core.c | 2 | ||||
-rw-r--r-- | drivers/memory/tegra/tegra30-emc.c | 131 |
9 files changed, 211 insertions, 30 deletions
diff --git a/drivers/memory/brcmstb_dpfe.c b/drivers/memory/brcmstb_dpfe.c index f43ba69fbb3e..14412002775d 100644 --- a/drivers/memory/brcmstb_dpfe.c +++ b/drivers/memory/brcmstb_dpfe.c @@ -424,7 +424,7 @@ static void __finalize_command(struct brcmstb_dpfe_priv *priv) /* * It depends on the API version which MBOX register we have to write to - * to signal we are done. + * signal we are done. */ release_mbox = (priv->dpfe_api->version < 2) ? REG_TO_HOST_MBOX : REG_TO_DCPU_MBOX; diff --git a/drivers/memory/emif.c b/drivers/memory/emif.c index 762d0c0f0716..ecc78d6f89ed 100644 --- a/drivers/memory/emif.c +++ b/drivers/memory/emif.c @@ -1025,7 +1025,7 @@ static struct emif_data *__init_or_module get_device_details( temp = devm_kzalloc(dev, sizeof(*pd), GFP_KERNEL); dev_info = devm_kzalloc(dev, sizeof(*dev_info), GFP_KERNEL); - if (!emif || !pd || !dev_info) { + if (!emif || !temp || !dev_info) { dev_err(dev, "%s:%d: allocation error\n", __func__, __LINE__); goto error; } @@ -1117,7 +1117,7 @@ static int __init_or_module emif_probe(struct platform_device *pdev) { struct emif_data *emif; struct resource *res; - int irq; + int irq, ret; if (pdev->dev.of_node) emif = of_get_memory_device_details(pdev->dev.of_node, &pdev->dev); @@ -1147,7 +1147,9 @@ static int __init_or_module emif_probe(struct platform_device *pdev) emif_onetime_settings(emif); emif_debugfs_init(emif); disable_and_clear_all_interrupts(emif); - setup_interrupts(emif, irq); + ret = setup_interrupts(emif, irq); + if (ret) + goto error; /* One-time actions taken on probing the first device */ if (!emif1) { diff --git a/drivers/memory/fsl_ifc.c b/drivers/memory/fsl_ifc.c index 75a8c38df939..2f6939da21cd 100644 --- a/drivers/memory/fsl_ifc.c +++ b/drivers/memory/fsl_ifc.c @@ -88,6 +88,7 @@ static int fsl_ifc_ctrl_remove(struct platform_device *dev) { struct fsl_ifc_ctrl *ctrl = dev_get_drvdata(&dev->dev); + of_platform_depopulate(&dev->dev); free_irq(ctrl->nand_irq, ctrl); free_irq(ctrl->irq, ctrl); @@ -285,8 +286,16 @@ static int fsl_ifc_ctrl_probe(struct platform_device *dev) } } + /* legacy dts may still use "simple-bus" compatible */ + ret = of_platform_populate(dev->dev.of_node, NULL, NULL, + &dev->dev); + if (ret) + goto err_free_nandirq; + return 0; +err_free_nandirq: + free_irq(fsl_ifc_ctrl_dev->nand_irq, fsl_ifc_ctrl_dev); err_free_irq: free_irq(fsl_ifc_ctrl_dev->irq, fsl_ifc_ctrl_dev); err_unmap_nandirq: diff --git a/drivers/memory/mtk-smi.c b/drivers/memory/mtk-smi.c index 40408a88f464..86a3d34f418e 100644 --- a/drivers/memory/mtk-smi.c +++ b/drivers/memory/mtk-smi.c @@ -8,6 +8,7 @@ #include <linux/device.h> #include <linux/err.h> #include <linux/io.h> +#include <linux/iopoll.h> #include <linux/module.h> #include <linux/of.h> #include <linux/of_platform.h> @@ -32,6 +33,10 @@ #define SMI_DUMMY 0x444 /* SMI LARB */ +#define SMI_LARB_SLP_CON 0xc +#define SLP_PROT_EN BIT(0) +#define SLP_PROT_RDY BIT(16) + #define SMI_LARB_CMD_THRT_CON 0x24 #define SMI_LARB_THRT_RD_NU_LMT_MSK GENMASK(7, 4) #define SMI_LARB_THRT_RD_NU_LMT (5 << 4) @@ -81,6 +86,7 @@ #define MTK_SMI_FLAG_THRT_UPDATE BIT(0) #define MTK_SMI_FLAG_SW_FLAG BIT(1) +#define MTK_SMI_FLAG_SLEEP_CTL BIT(2) #define MTK_SMI_CAPS(flags, _x) (!!((flags) & (_x))) struct mtk_smi_reg_pair { @@ -94,8 +100,6 @@ enum mtk_smi_type { MTK_SMI_GEN2_SUB_COMM, /* gen2 smi sub common */ }; -#define MTK_SMI_CLK_NR_MAX 4 - /* larbs: Require apb/smi clocks while gals is optional. */ static const char * const mtk_smi_larb_clks[] = {"apb", "smi", "gals"}; #define MTK_SMI_LARB_REQ_CLK_NR 2 @@ -106,6 +110,7 @@ static const char * const mtk_smi_larb_clks[] = {"apb", "smi", "gals"}; * sub common: Require apb/smi/gals0 clocks in has_gals case. Otherwise, only apb/smi are required. */ static const char * const mtk_smi_common_clks[] = {"apb", "smi", "gals0", "gals1"}; +#define MTK_SMI_CLK_NR_MAX ARRAY_SIZE(mtk_smi_common_clks) #define MTK_SMI_COM_REQ_CLK_NR 2 #define MTK_SMI_COM_GALS_REQ_CLK_NR MTK_SMI_CLK_NR_MAX #define MTK_SMI_SUB_COM_GALS_REQ_CLK_NR 3 @@ -335,13 +340,19 @@ static const struct mtk_smi_larb_gen mtk_smi_larb_mt8183 = { /* IPU0 | IPU1 | CCU */ }; +static const struct mtk_smi_larb_gen mtk_smi_larb_mt8186 = { + .config_port = mtk_smi_larb_config_port_gen2_general, + .flags_general = MTK_SMI_FLAG_SLEEP_CTL, +}; + static const struct mtk_smi_larb_gen mtk_smi_larb_mt8192 = { .config_port = mtk_smi_larb_config_port_gen2_general, }; static const struct mtk_smi_larb_gen mtk_smi_larb_mt8195 = { .config_port = mtk_smi_larb_config_port_gen2_general, - .flags_general = MTK_SMI_FLAG_THRT_UPDATE | MTK_SMI_FLAG_SW_FLAG, + .flags_general = MTK_SMI_FLAG_THRT_UPDATE | MTK_SMI_FLAG_SW_FLAG | + MTK_SMI_FLAG_SLEEP_CTL, .ostd = mtk_smi_larb_mt8195_ostd, }; @@ -352,11 +363,32 @@ static const struct of_device_id mtk_smi_larb_of_ids[] = { {.compatible = "mediatek,mt8167-smi-larb", .data = &mtk_smi_larb_mt8167}, {.compatible = "mediatek,mt8173-smi-larb", .data = &mtk_smi_larb_mt8173}, {.compatible = "mediatek,mt8183-smi-larb", .data = &mtk_smi_larb_mt8183}, + {.compatible = "mediatek,mt8186-smi-larb", .data = &mtk_smi_larb_mt8186}, {.compatible = "mediatek,mt8192-smi-larb", .data = &mtk_smi_larb_mt8192}, {.compatible = "mediatek,mt8195-smi-larb", .data = &mtk_smi_larb_mt8195}, {} }; +static int mtk_smi_larb_sleep_ctrl_enable(struct mtk_smi_larb *larb) +{ + int ret; + u32 tmp; + + writel_relaxed(SLP_PROT_EN, larb->base + SMI_LARB_SLP_CON); + ret = readl_poll_timeout_atomic(larb->base + SMI_LARB_SLP_CON, + tmp, !!(tmp & SLP_PROT_RDY), 10, 1000); + if (ret) { + /* TODO: Reset this larb if it fails here. */ + dev_err(larb->smi.dev, "sleep ctrl is not ready(0x%x).\n", tmp); + } + return ret; +} + +static void mtk_smi_larb_sleep_ctrl_disable(struct mtk_smi_larb *larb) +{ + writel_relaxed(0, larb->base + SMI_LARB_SLP_CON); +} + static int mtk_smi_device_link_common(struct device *dev, struct device **com_dev) { struct platform_device *smi_com_pdev; @@ -466,9 +498,12 @@ static int __maybe_unused mtk_smi_larb_resume(struct device *dev) int ret; ret = clk_bulk_prepare_enable(larb->smi.clk_num, larb->smi.clks); - if (ret < 0) + if (ret) return ret; + if (MTK_SMI_CAPS(larb->larb_gen->flags_general, MTK_SMI_FLAG_SLEEP_CTL)) + mtk_smi_larb_sleep_ctrl_disable(larb); + /* Configure the basic setting for this larb */ larb_gen->config_port(dev); @@ -478,6 +513,13 @@ static int __maybe_unused mtk_smi_larb_resume(struct device *dev) static int __maybe_unused mtk_smi_larb_suspend(struct device *dev) { struct mtk_smi_larb *larb = dev_get_drvdata(dev); + int ret; + + if (MTK_SMI_CAPS(larb->larb_gen->flags_general, MTK_SMI_FLAG_SLEEP_CTL)) { + ret = mtk_smi_larb_sleep_ctrl_enable(larb); + if (ret) + return ret; + } clk_bulk_disable_unprepare(larb->smi.clk_num, larb->smi.clks); return 0; @@ -530,6 +572,12 @@ static const struct mtk_smi_common_plat mtk_smi_common_mt8183 = { F_MMU1_LARB(7), }; +static const struct mtk_smi_common_plat mtk_smi_common_mt8186 = { + .type = MTK_SMI_GEN2, + .has_gals = true, + .bus_sel = F_MMU1_LARB(1) | F_MMU1_LARB(4) | F_MMU1_LARB(7), +}; + static const struct mtk_smi_common_plat mtk_smi_common_mt8192 = { .type = MTK_SMI_GEN2, .has_gals = true, @@ -564,6 +612,7 @@ static const struct of_device_id mtk_smi_common_of_ids[] = { {.compatible = "mediatek,mt8167-smi-common", .data = &mtk_smi_common_gen2}, {.compatible = "mediatek,mt8173-smi-common", .data = &mtk_smi_common_gen2}, {.compatible = "mediatek,mt8183-smi-common", .data = &mtk_smi_common_mt8183}, + {.compatible = "mediatek,mt8186-smi-common", .data = &mtk_smi_common_mt8186}, {.compatible = "mediatek,mt8192-smi-common", .data = &mtk_smi_common_mt8192}, {.compatible = "mediatek,mt8195-smi-common-vdo", .data = &mtk_smi_common_mt8195_vdo}, {.compatible = "mediatek,mt8195-smi-common-vpp", .data = &mtk_smi_common_mt8195_vpp}, diff --git a/drivers/memory/of_memory.c b/drivers/memory/of_memory.c index b94408954d85..dbdf87bc0b78 100644 --- a/drivers/memory/of_memory.c +++ b/drivers/memory/of_memory.c @@ -212,8 +212,10 @@ static int of_lpddr3_do_get_timings(struct device_node *np, { int ret; - /* The 'reg' param required since DT has changed, used as 'max-freq' */ - ret = of_property_read_u32(np, "reg", &tim->max_freq); + ret = of_property_read_u32(np, "max-freq", &tim->max_freq); + if (ret) + /* Deprecated way of passing max-freq as 'reg' */ + ret = of_property_read_u32(np, "reg", &tim->max_freq); ret |= of_property_read_u32(np, "min-freq", &tim->min_freq); ret |= of_property_read_u32(np, "tRFC", &tim->tRFC); ret |= of_property_read_u32(np, "tRRD", &tim->tRRD); @@ -316,14 +318,21 @@ const struct lpddr2_info struct property *prop; const char *cp; int err; - - err = of_property_read_u32(np, "revision-id1", &info.revision_id1); - if (err) - info.revision_id1 = -ENOENT; - - err = of_property_read_u32(np, "revision-id2", &info.revision_id2); - if (err) - info.revision_id2 = -ENOENT; + u32 revision_id[2]; + + err = of_property_read_u32_array(np, "revision-id", revision_id, 2); + if (!err) { + info.revision_id1 = revision_id[0]; + info.revision_id2 = revision_id[1]; + } else { + err = of_property_read_u32(np, "revision-id1", &info.revision_id1); + if (err) + info.revision_id1 = -ENOENT; + + err = of_property_read_u32(np, "revision-id2", &info.revision_id2); + if (err) + info.revision_id2 = -ENOENT; + } err = of_property_read_u32(np, "io-width", &info.io_width); if (err) diff --git a/drivers/memory/tegra/Kconfig b/drivers/memory/tegra/Kconfig index 7951764b4efe..3fe83d7c2bf8 100644 --- a/drivers/memory/tegra/Kconfig +++ b/drivers/memory/tegra/Kconfig @@ -28,6 +28,7 @@ config TEGRA30_EMC default y depends on ARCH_TEGRA_3x_SOC || COMPILE_TEST select PM_OPP + select DDR help This driver is for the External Memory Controller (EMC) found on Tegra30 chips. The EMC controls the external DRAM on the board. diff --git a/drivers/memory/tegra/tegra20-emc.c b/drivers/memory/tegra/tegra20-emc.c index 497b6edbf3ca..25ba3c5e4ad6 100644 --- a/drivers/memory/tegra/tegra20-emc.c +++ b/drivers/memory/tegra/tegra20-emc.c @@ -540,7 +540,7 @@ static int emc_read_lpddr_mode_register(struct tegra_emc *emc, unsigned int register_addr, unsigned int *register_data) { - u32 memory_dev = emem_dev + 1; + u32 memory_dev = emem_dev ? 1 : 2; u32 val, mr_mask = 0xff; int err; diff --git a/drivers/memory/tegra/tegra210-emc-core.c b/drivers/memory/tegra/tegra210-emc-core.c index 13584f9317a4..cbe1a7723514 100644 --- a/drivers/memory/tegra/tegra210-emc-core.c +++ b/drivers/memory/tegra/tegra210-emc-core.c @@ -711,7 +711,7 @@ static int tegra210_emc_cd_set_state(struct thermal_cooling_device *cd, return 0; } -static struct thermal_cooling_device_ops tegra210_emc_cd_ops = { +static const struct thermal_cooling_device_ops tegra210_emc_cd_ops = { .get_max_state = tegra210_emc_cd_max_state, .get_cur_state = tegra210_emc_cd_get_state, .set_cur_state = tegra210_emc_cd_set_state, diff --git a/drivers/memory/tegra/tegra30-emc.c b/drivers/memory/tegra/tegra30-emc.c index 80f98d717e13..9ba2a9e5316b 100644 --- a/drivers/memory/tegra/tegra30-emc.c +++ b/drivers/memory/tegra/tegra30-emc.c @@ -9,6 +9,7 @@ * Copyright (C) 2019 GRATE-DRIVER project */ +#include <linux/bitfield.h> #include <linux/clk.h> #include <linux/clk/tegra.h> #include <linux/debugfs.h> @@ -31,11 +32,15 @@ #include <soc/tegra/common.h> #include <soc/tegra/fuse.h> +#include "../jedec_ddr.h" +#include "../of_memory.h" + #include "mc.h" #define EMC_INTSTATUS 0x000 #define EMC_INTMASK 0x004 #define EMC_DBG 0x008 +#define EMC_ADR_CFG 0x010 #define EMC_CFG 0x00c #define EMC_REFCTRL 0x020 #define EMC_TIMING_CONTROL 0x028 @@ -81,6 +86,7 @@ #define EMC_EMRS 0x0d0 #define EMC_SELF_REF 0x0e0 #define EMC_MRW 0x0e8 +#define EMC_MRR 0x0ec #define EMC_XM2DQSPADCTRL3 0x0f8 #define EMC_FBIO_SPARE 0x100 #define EMC_FBIO_CFG5 0x104 @@ -208,6 +214,13 @@ #define EMC_REFRESH_OVERFLOW_INT BIT(3) #define EMC_CLKCHANGE_COMPLETE_INT BIT(4) +#define EMC_MRR_DIVLD_INT BIT(5) + +#define EMC_MRR_DEV_SELECTN GENMASK(31, 30) +#define EMC_MRR_MRR_MA GENMASK(23, 16) +#define EMC_MRR_MRR_DATA GENMASK(15, 0) + +#define EMC_ADR_CFG_EMEM_NUMDEV BIT(0) enum emc_dram_type { DRAM_TYPE_DDR3, @@ -378,6 +391,8 @@ struct tegra_emc { /* protect shared rate-change code path */ struct mutex rate_lock; + + bool mrr_error; }; static int emc_seq_update_timing(struct tegra_emc *emc) @@ -1008,12 +1023,18 @@ static int emc_load_timings_from_dt(struct tegra_emc *emc, return 0; } -static struct device_node *emc_find_node_by_ram_code(struct device *dev) +static struct device_node *emc_find_node_by_ram_code(struct tegra_emc *emc) { + struct device *dev = emc->dev; struct device_node *np; u32 value, ram_code; int err; + if (emc->mrr_error) { + dev_warn(dev, "memory timings skipped due to MRR error\n"); + return NULL; + } + if (of_get_child_count(dev->of_node) == 0) { dev_info_once(dev, "device-tree doesn't have memory timings\n"); return NULL; @@ -1035,11 +1056,73 @@ static struct device_node *emc_find_node_by_ram_code(struct device *dev) return NULL; } +static int emc_read_lpddr_mode_register(struct tegra_emc *emc, + unsigned int emem_dev, + unsigned int register_addr, + unsigned int *register_data) +{ + u32 memory_dev = emem_dev ? 1 : 2; + u32 val, mr_mask = 0xff; + int err; + + /* clear data-valid interrupt status */ + writel_relaxed(EMC_MRR_DIVLD_INT, emc->regs + EMC_INTSTATUS); + + /* issue mode register read request */ + val = FIELD_PREP(EMC_MRR_DEV_SELECTN, memory_dev); + val |= FIELD_PREP(EMC_MRR_MRR_MA, register_addr); + + writel_relaxed(val, emc->regs + EMC_MRR); + + /* wait for the LPDDR2 data-valid interrupt */ + err = readl_relaxed_poll_timeout_atomic(emc->regs + EMC_INTSTATUS, val, + val & EMC_MRR_DIVLD_INT, + 1, 100); + if (err) { + dev_err(emc->dev, "mode register %u read failed: %d\n", + register_addr, err); + emc->mrr_error = true; + return err; + } + + /* read out mode register data */ + val = readl_relaxed(emc->regs + EMC_MRR); + *register_data = FIELD_GET(EMC_MRR_MRR_DATA, val) & mr_mask; + + return 0; +} + +static void emc_read_lpddr_sdram_info(struct tegra_emc *emc, + unsigned int emem_dev) +{ + union lpddr2_basic_config4 basic_conf4; + unsigned int manufacturer_id; + unsigned int revision_id1; + unsigned int revision_id2; + + /* these registers are standard for all LPDDR JEDEC memory chips */ + emc_read_lpddr_mode_register(emc, emem_dev, 5, &manufacturer_id); + emc_read_lpddr_mode_register(emc, emem_dev, 6, &revision_id1); + emc_read_lpddr_mode_register(emc, emem_dev, 7, &revision_id2); + emc_read_lpddr_mode_register(emc, emem_dev, 8, &basic_conf4.value); + + dev_info(emc->dev, "SDRAM[dev%u]: manufacturer: 0x%x (%s) rev1: 0x%x rev2: 0x%x prefetch: S%u density: %uMbit iowidth: %ubit\n", + emem_dev, manufacturer_id, + lpddr2_jedec_manufacturer(manufacturer_id), + revision_id1, revision_id2, + 4 >> basic_conf4.arch_type, + 64 << basic_conf4.density, + 32 >> basic_conf4.io_width); +} + static int emc_setup_hw(struct tegra_emc *emc) { + u32 fbio_cfg5, emc_cfg, emc_dbg, emc_adr_cfg; u32 intmask = EMC_REFRESH_OVERFLOW_INT; - u32 fbio_cfg5, emc_cfg, emc_dbg; + static bool print_sdram_info_once; enum emc_dram_type dram_type; + const char *dram_type_str; + unsigned int emem_numdev; fbio_cfg5 = readl_relaxed(emc->regs + EMC_FBIO_CFG5); dram_type = fbio_cfg5 & EMC_FBIO_CFG5_DRAM_TYPE_MASK; @@ -1076,6 +1159,34 @@ static int emc_setup_hw(struct tegra_emc *emc) emc_dbg &= ~EMC_DBG_FORCE_UPDATE; writel_relaxed(emc_dbg, emc->regs + EMC_DBG); + switch (dram_type) { + case DRAM_TYPE_DDR1: + dram_type_str = "DDR1"; + break; + case DRAM_TYPE_LPDDR2: + dram_type_str = "LPDDR2"; + break; + case DRAM_TYPE_DDR2: + dram_type_str = "DDR2"; + break; + case DRAM_TYPE_DDR3: + dram_type_str = "DDR3"; + break; + } + + emc_adr_cfg = readl_relaxed(emc->regs + EMC_ADR_CFG); + emem_numdev = FIELD_GET(EMC_ADR_CFG_EMEM_NUMDEV, emc_adr_cfg) + 1; + + dev_info_once(emc->dev, "%u %s %s attached\n", emem_numdev, + dram_type_str, emem_numdev == 2 ? "devices" : "device"); + + if (dram_type == DRAM_TYPE_LPDDR2 && !print_sdram_info_once) { + while (emem_numdev--) + emc_read_lpddr_sdram_info(emc, emem_numdev); + + print_sdram_info_once = true; + } + return 0; } @@ -1538,14 +1649,6 @@ static int tegra_emc_probe(struct platform_device *pdev) emc->clk_nb.notifier_call = emc_clk_change_notify; emc->dev = &pdev->dev; - np = emc_find_node_by_ram_code(&pdev->dev); - if (np) { - err = emc_load_timings_from_dt(emc, np); - of_node_put(np); - if (err) - return err; - } - emc->regs = devm_platform_ioremap_resource(pdev, 0); if (IS_ERR(emc->regs)) return PTR_ERR(emc->regs); @@ -1554,6 +1657,14 @@ static int tegra_emc_probe(struct platform_device *pdev) if (err) return err; + np = emc_find_node_by_ram_code(emc); + if (np) { + err = emc_load_timings_from_dt(emc, np); + of_node_put(np); + if (err) + return err; + } + err = platform_get_irq(pdev, 0); if (err < 0) return err; |