mfd: support ROHM BD96801 PMIC core

The ROHM BD96801 PMIC is highly customizable automotive grade PMIC
which integrates regulator and watchdog funtionalities.

Provide INTB IRQ and register accesses for regulator/watchdog drivers.

Signed-off-by: Matti Vaittinen <mazziesaccount@gmail.com>
Link: https://lore.kernel.org/r/c5260e2dd222e3c64cdf410802bba195637ccb93.1719473802.git.mazziesaccount@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>

1 files changed, 273 insertions, 0 deletions

diff --git a/drivers/mfd/rohm-bd96801.c b/drivers/mfd/rohm-bd96801.c
new file mode 100644
index 000000000000..714f08ed544b
--- /dev/null
+++ b/drivers/mfd/rohm-bd96801.c
@@ -0,0 +1,273 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (C) 2024 ROHM Semiconductors
+ *
+ * ROHM BD96801 PMIC driver
+ *
+ * This version of the "BD86801 scalable PMIC"'s driver supports only very
+ * basic set of the PMIC features. Most notably, there is no support for
+ * the ERRB interrupt and the configurations which should be done when the
+ * PMIC is in STBY mode.
+ *
+ * Supporting the ERRB interrupt would require dropping the regmap-IRQ
+ * usage or working around (or accepting a presense of) a naming conflict
+ * in debugFS IRQs.
+ *
+ * Being able to reliably do the configurations like changing the
+ * regulator safety limits (like limits for the over/under -voltages, over
+ * current, thermal protection) would require the configuring driver to be
+ * synchronized with entity causing the PMIC state transitions. Eg, one
+ * should be able to ensure the PMIC is in STBY state when the
+ * configurations are applied to the hardware. How and when the PMIC state
+ * transitions are to be done is likely to be very system specific, as will
+ * be the need to configure these safety limits. Hence it's not simple to
+ * come up with a generic solution.
+ *
+ * Users who require the ERRB handling and STBY state configurations can
+ * have a look at the original RFC:
+ * https://lore.kernel.org/all/cover.1712920132.git.mazziesaccount@gmail.com/
+ * which implements a workaround to debugFS naming conflict and some of
+ * the safety limit configurations - but leaves the state change handling
+ * and synchronization to be implemented.
+ *
+ * It would be great to hear (and receive a patch!) if you implement the
+ * STBY configuration support or a proper fix to the debugFS naming
+ * conflict in your downstream driver ;)
+ */
+
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include <linux/types.h>
+
+#include <linux/mfd/rohm-bd96801.h>
+#include <linux/mfd/rohm-generic.h>
+
+static const struct resource regulator_intb_irqs[] = {
+	DEFINE_RES_IRQ_NAMED(BD96801_TW_STAT, "bd96801-core-thermal"),
+
+	DEFINE_RES_IRQ_NAMED(BD96801_BUCK1_OCPH_STAT, "bd96801-buck1-overcurr-h"),
+	DEFINE_RES_IRQ_NAMED(BD96801_BUCK1_OCPL_STAT, "bd96801-buck1-overcurr-l"),
+	DEFINE_RES_IRQ_NAMED(BD96801_BUCK1_OCPN_STAT, "bd96801-buck1-overcurr-n"),
+	DEFINE_RES_IRQ_NAMED(BD96801_BUCK1_OVD_STAT, "bd96801-buck1-overvolt"),
+	DEFINE_RES_IRQ_NAMED(BD96801_BUCK1_UVD_STAT, "bd96801-buck1-undervolt"),
+	DEFINE_RES_IRQ_NAMED(BD96801_BUCK1_TW_CH_STAT, "bd96801-buck1-thermal"),
+
+	DEFINE_RES_IRQ_NAMED(BD96801_BUCK2_OCPH_STAT, "bd96801-buck2-overcurr-h"),
+	DEFINE_RES_IRQ_NAMED(BD96801_BUCK2_OCPL_STAT, "bd96801-buck2-overcurr-l"),
+	DEFINE_RES_IRQ_NAMED(BD96801_BUCK2_OCPN_STAT, "bd96801-buck2-overcurr-n"),
+	DEFINE_RES_IRQ_NAMED(BD96801_BUCK2_OVD_STAT, "bd96801-buck2-overvolt"),
+	DEFINE_RES_IRQ_NAMED(BD96801_BUCK2_UVD_STAT, "bd96801-buck2-undervolt"),
+	DEFINE_RES_IRQ_NAMED(BD96801_BUCK2_TW_CH_STAT, "bd96801-buck2-thermal"),
+
+	DEFINE_RES_IRQ_NAMED(BD96801_BUCK3_OCPH_STAT, "bd96801-buck3-overcurr-h"),
+	DEFINE_RES_IRQ_NAMED(BD96801_BUCK3_OCPL_STAT, "bd96801-buck3-overcurr-l"),
+	DEFINE_RES_IRQ_NAMED(BD96801_BUCK3_OCPN_STAT, "bd96801-buck3-overcurr-n"),
+	DEFINE_RES_IRQ_NAMED(BD96801_BUCK3_OVD_STAT, "bd96801-buck3-overvolt"),
+	DEFINE_RES_IRQ_NAMED(BD96801_BUCK3_UVD_STAT, "bd96801-buck3-undervolt"),
+	DEFINE_RES_IRQ_NAMED(BD96801_BUCK3_TW_CH_STAT, "bd96801-buck3-thermal"),
+
+	DEFINE_RES_IRQ_NAMED(BD96801_BUCK4_OCPH_STAT, "bd96801-buck4-overcurr-h"),
+	DEFINE_RES_IRQ_NAMED(BD96801_BUCK4_OCPL_STAT, "bd96801-buck4-overcurr-l"),
+	DEFINE_RES_IRQ_NAMED(BD96801_BUCK4_OCPN_STAT, "bd96801-buck4-overcurr-n"),
+	DEFINE_RES_IRQ_NAMED(BD96801_BUCK4_OVD_STAT, "bd96801-buck4-overvolt"),
+	DEFINE_RES_IRQ_NAMED(BD96801_BUCK4_UVD_STAT, "bd96801-buck4-undervolt"),
+	DEFINE_RES_IRQ_NAMED(BD96801_BUCK4_TW_CH_STAT, "bd96801-buck4-thermal"),
+
+	DEFINE_RES_IRQ_NAMED(BD96801_LDO5_OCPH_STAT, "bd96801-ldo5-overcurr"),
+	DEFINE_RES_IRQ_NAMED(BD96801_LDO5_OVD_STAT, "bd96801-ldo5-overvolt"),
+	DEFINE_RES_IRQ_NAMED(BD96801_LDO5_UVD_STAT, "bd96801-ldo5-undervolt"),
+
+	DEFINE_RES_IRQ_NAMED(BD96801_LDO6_OCPH_STAT, "bd96801-ldo6-overcurr"),
+	DEFINE_RES_IRQ_NAMED(BD96801_LDO6_OVD_STAT, "bd96801-ldo6-overvolt"),
+	DEFINE_RES_IRQ_NAMED(BD96801_LDO6_UVD_STAT, "bd96801-ldo6-undervolt"),
+
+	DEFINE_RES_IRQ_NAMED(BD96801_LDO7_OCPH_STAT, "bd96801-ldo7-overcurr"),
+	DEFINE_RES_IRQ_NAMED(BD96801_LDO7_OVD_STAT, "bd96801-ldo7-overvolt"),
+	DEFINE_RES_IRQ_NAMED(BD96801_LDO7_UVD_STAT, "bd96801-ldo7-undervolt"),
+};
+
+static const struct resource wdg_intb_irqs[] = {
+	DEFINE_RES_IRQ_NAMED(BD96801_WDT_ERR_STAT, "bd96801-wdg"),
+};
+
+static struct mfd_cell bd96801_cells[] = {
+	{
+		.name = "bd96801-wdt",
+		.resources = wdg_intb_irqs,
+		.num_resources = ARRAY_SIZE(wdg_intb_irqs),
+	}, {
+		.name = "bd96801-regulator",
+		.resources = regulator_intb_irqs,
+		.num_resources = ARRAY_SIZE(regulator_intb_irqs),
+	},
+};
+
+static const struct regmap_range bd96801_volatile_ranges[] = {
+	/* Status registers */
+	regmap_reg_range(BD96801_REG_WD_FEED, BD96801_REG_WD_FAILCOUNT),
+	regmap_reg_range(BD96801_REG_WD_ASK, BD96801_REG_WD_ASK),
+	regmap_reg_range(BD96801_REG_WD_STATUS, BD96801_REG_WD_STATUS),
+	regmap_reg_range(BD96801_REG_PMIC_STATE, BD96801_REG_INT_LDO7_INTB),
+	/* Registers which do not update value unless PMIC is in STBY */
+	regmap_reg_range(BD96801_REG_SSCG_CTRL, BD96801_REG_SHD_INTB),
+	regmap_reg_range(BD96801_REG_BUCK_OVP, BD96801_REG_BOOT_OVERTIME),
+	/*
+	 * LDO control registers have single bit (LDO MODE) which does not
+	 * change when we write it unless PMIC is in STBY. It's safer to not
+	 * cache it.
+	 */
+	regmap_reg_range(BD96801_LDO5_VOL_LVL_REG, BD96801_LDO7_VOL_LVL_REG),
+};
+
+static const struct regmap_access_table volatile_regs = {
+	.yes_ranges = bd96801_volatile_ranges,
+	.n_yes_ranges = ARRAY_SIZE(bd96801_volatile_ranges),
+};
+
+static const struct regmap_irq bd96801_intb_irqs[] = {
+	/* STATUS SYSTEM INTB */
+	REGMAP_IRQ_REG(BD96801_TW_STAT, 0, BD96801_TW_STAT_MASK),
+	REGMAP_IRQ_REG(BD96801_WDT_ERR_STAT, 0, BD96801_WDT_ERR_STAT_MASK),
+	REGMAP_IRQ_REG(BD96801_I2C_ERR_STAT, 0, BD96801_I2C_ERR_STAT_MASK),
+	REGMAP_IRQ_REG(BD96801_CHIP_IF_ERR_STAT, 0, BD96801_CHIP_IF_ERR_STAT_MASK),
+	/* STATUS BUCK1 INTB */
+	REGMAP_IRQ_REG(BD96801_BUCK1_OCPH_STAT, 1, BD96801_BUCK_OCPH_STAT_MASK),
+	REGMAP_IRQ_REG(BD96801_BUCK1_OCPL_STAT, 1, BD96801_BUCK_OCPL_STAT_MASK),
+	REGMAP_IRQ_REG(BD96801_BUCK1_OCPN_STAT, 1, BD96801_BUCK_OCPN_STAT_MASK),
+	REGMAP_IRQ_REG(BD96801_BUCK1_OVD_STAT, 1, BD96801_BUCK_OVD_STAT_MASK),
+	REGMAP_IRQ_REG(BD96801_BUCK1_UVD_STAT, 1, BD96801_BUCK_UVD_STAT_MASK),
+	REGMAP_IRQ_REG(BD96801_BUCK1_TW_CH_STAT, 1, BD96801_BUCK_TW_CH_STAT_MASK),
+	/* BUCK 2 INTB */
+	REGMAP_IRQ_REG(BD96801_BUCK2_OCPH_STAT, 2, BD96801_BUCK_OCPH_STAT_MASK),
+	REGMAP_IRQ_REG(BD96801_BUCK2_OCPL_STAT, 2, BD96801_BUCK_OCPL_STAT_MASK),
+	REGMAP_IRQ_REG(BD96801_BUCK2_OCPN_STAT, 2, BD96801_BUCK_OCPN_STAT_MASK),
+	REGMAP_IRQ_REG(BD96801_BUCK2_OVD_STAT, 2, BD96801_BUCK_OVD_STAT_MASK),
+	REGMAP_IRQ_REG(BD96801_BUCK2_UVD_STAT, 2, BD96801_BUCK_UVD_STAT_MASK),
+	REGMAP_IRQ_REG(BD96801_BUCK2_TW_CH_STAT, 2, BD96801_BUCK_TW_CH_STAT_MASK),
+	/* BUCK 3 INTB */
+	REGMAP_IRQ_REG(BD96801_BUCK3_OCPH_STAT, 3, BD96801_BUCK_OCPH_STAT_MASK),
+	REGMAP_IRQ_REG(BD96801_BUCK3_OCPL_STAT, 3, BD96801_BUCK_OCPL_STAT_MASK),
+	REGMAP_IRQ_REG(BD96801_BUCK3_OCPN_STAT, 3, BD96801_BUCK_OCPN_STAT_MASK),
+	REGMAP_IRQ_REG(BD96801_BUCK3_OVD_STAT, 3, BD96801_BUCK_OVD_STAT_MASK),
+	REGMAP_IRQ_REG(BD96801_BUCK3_UVD_STAT, 3, BD96801_BUCK_UVD_STAT_MASK),
+	REGMAP_IRQ_REG(BD96801_BUCK3_TW_CH_STAT, 3, BD96801_BUCK_TW_CH_STAT_MASK),
+	/* BUCK 4 INTB */
+	REGMAP_IRQ_REG(BD96801_BUCK4_OCPH_STAT, 4, BD96801_BUCK_OCPH_STAT_MASK),
+	REGMAP_IRQ_REG(BD96801_BUCK4_OCPL_STAT, 4, BD96801_BUCK_OCPL_STAT_MASK),
+	REGMAP_IRQ_REG(BD96801_BUCK4_OCPN_STAT, 4, BD96801_BUCK_OCPN_STAT_MASK),
+	REGMAP_IRQ_REG(BD96801_BUCK4_OVD_STAT, 4, BD96801_BUCK_OVD_STAT_MASK),
+	REGMAP_IRQ_REG(BD96801_BUCK4_UVD_STAT, 4, BD96801_BUCK_UVD_STAT_MASK),
+	REGMAP_IRQ_REG(BD96801_BUCK4_TW_CH_STAT, 4, BD96801_BUCK_TW_CH_STAT_MASK),
+	/* LDO5 INTB */
+	REGMAP_IRQ_REG(BD96801_LDO5_OCPH_STAT, 5, BD96801_LDO_OCPH_STAT_MASK),
+	REGMAP_IRQ_REG(BD96801_LDO5_OVD_STAT, 5, BD96801_LDO_OVD_STAT_MASK),
+	REGMAP_IRQ_REG(BD96801_LDO5_UVD_STAT, 5, BD96801_LDO_UVD_STAT_MASK),
+	/* LDO6 INTB */
+	REGMAP_IRQ_REG(BD96801_LDO6_OCPH_STAT, 6, BD96801_LDO_OCPH_STAT_MASK),
+	REGMAP_IRQ_REG(BD96801_LDO6_OVD_STAT, 6, BD96801_LDO_OVD_STAT_MASK),
+	REGMAP_IRQ_REG(BD96801_LDO6_UVD_STAT, 6, BD96801_LDO_UVD_STAT_MASK),
+	/* LDO7 INTB */
+	REGMAP_IRQ_REG(BD96801_LDO7_OCPH_STAT, 7, BD96801_LDO_OCPH_STAT_MASK),
+	REGMAP_IRQ_REG(BD96801_LDO7_OVD_STAT, 7, BD96801_LDO_OVD_STAT_MASK),
+	REGMAP_IRQ_REG(BD96801_LDO7_UVD_STAT, 7, BD96801_LDO_UVD_STAT_MASK),
+};
+
+static struct regmap_irq_chip bd96801_irq_chip_intb = {
+	.name = "bd96801-irq-intb",
+	.main_status = BD96801_REG_INT_MAIN,
+	.num_main_regs = 1,
+	.irqs = &bd96801_intb_irqs[0],
+	.num_irqs = ARRAY_SIZE(bd96801_intb_irqs),
+	.status_base = BD96801_REG_INT_SYS_INTB,
+	.mask_base = BD96801_REG_MASK_SYS_INTB,
+	.ack_base = BD96801_REG_INT_SYS_INTB,
+	.init_ack_masked = true,
+	.num_regs = 8,
+	.irq_reg_stride = 1,
+};
+
+static const struct regmap_config bd96801_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.volatile_table = &volatile_regs,
+	.cache_type = REGCACHE_RBTREE,
+};
+
+static int bd96801_i2c_probe(struct i2c_client *i2c)
+{
+	struct regmap_irq_chip_data *intb_irq_data;
+	const struct fwnode_handle *fwnode;
+	struct irq_domain *intb_domain;
+	struct regmap *regmap;
+	int ret, intb_irq;
+
+	fwnode = dev_fwnode(&i2c->dev);
+	if (!fwnode)
+		return dev_err_probe(&i2c->dev, -EINVAL, "Failed to find fwnode\n");
+
+	intb_irq = fwnode_irq_get_byname(fwnode, "intb");
+	if (intb_irq < 0)
+		return dev_err_probe(&i2c->dev, intb_irq, "INTB IRQ not configured\n");
+
+	regmap = devm_regmap_init_i2c(i2c, &bd96801_regmap_config);
+	if (IS_ERR(regmap))
+		return dev_err_probe(&i2c->dev, PTR_ERR(regmap),
+				    "Regmap initialization failed\n");
+
+	ret = regmap_write(regmap, BD96801_LOCK_REG, BD96801_UNLOCK);
+	if (ret)
+		return dev_err_probe(&i2c->dev, ret, "Failed to unlock PMIC\n");
+
+	ret = devm_regmap_add_irq_chip(&i2c->dev, regmap, intb_irq,
+				       IRQF_ONESHOT, 0, &bd96801_irq_chip_intb,
+				       &intb_irq_data);
+	if (ret)
+		return dev_err_probe(&i2c->dev, ret, "Failed to add INTB IRQ chip\n");
+
+	intb_domain = regmap_irq_get_domain(intb_irq_data);
+
+	ret = devm_mfd_add_devices(&i2c->dev, PLATFORM_DEVID_AUTO,
+				   bd96801_cells,
+				   ARRAY_SIZE(bd96801_cells), NULL, 0,
+				   intb_domain);
+	if (ret)
+		dev_err(&i2c->dev, "Failed to create subdevices\n");
+
+	return ret;
+}
+
+static const struct of_device_id bd96801_of_match[] = {
+	{ .compatible = "rohm,bd96801",	},
+	{ }
+};
+MODULE_DEVICE_TABLE(of, bd96801_of_match);
+
+static struct i2c_driver bd96801_i2c_driver = {
+	.driver = {
+		.name = "rohm-bd96801",
+		.of_match_table = bd96801_of_match,
+	},
+	.probe = bd96801_i2c_probe,
+};
+
+static int __init bd96801_i2c_init(void)
+{
+	return i2c_add_driver(&bd96801_i2c_driver);
+}
+
+/* Initialise early so consumer devices can complete system boot */
+subsys_initcall(bd96801_i2c_init);
+
+static void __exit bd96801_i2c_exit(void)
+{
+	i2c_del_driver(&bd96801_i2c_driver);
+}
+module_exit(bd96801_i2c_exit);
+
+MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>");
+MODULE_DESCRIPTION("ROHM BD96801 Power Management IC driver");
+MODULE_LICENSE("GPL");