Merge tag 'nand/for-5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/next

NAND core changes:
- use longest matching pattern in ->exec_op() default parser
- export NAND operation tracer
- add flag to indicate panic_write in MTD
- use kzalloc() instead of kmalloc() and memset()

Raw NAND controller drivers changes:
- brcmnand:
  * fix BCH ECC layout for large page NAND parts
  * fallback to detected ecc-strength, ecc-step-size
  * when oops in progress use pio and interrupt polling
  * code refactor code to introduce helper functions
  * add support for v7.3 controller
- FSMC:
  * use nand_op_trace for operation tracing
- GPMI:
  * move all driver code into single file
  * various cleanups (including dmaengine changes)
  * use runtime PM to manage clocks
  * implement exec_op
- MTK:
  * correct low level time calculation of r/w cycle
  * improve data sampling timing for read cycle
  * add validity check for CE# pin setting
  * fix wrongly assigned OOB buffer pointer issue
  * re-license MTK NAND driver as Dual MIT/GPL
- STM32:
  * manage the get_irq error case
  * increase DMA completion timeouts

Raw NAND chips drivers changes:
- Macronix: add read-retry support

Onenand driver changes:
- add support for 8Gb datasize chips
- avoid fall-through warnings

SPI-NAND changes:
- define macros for page-read ops with three-byte addresses
- add support for two-byte device IDs and then for GigaDevice
  GD5F1GQ4UFxxG
- add initial support for Paragon PN26G0xA
- handle the case where the last page read has bitflips

1 files changed, 15 insertions, 6 deletions

diff --git a/drivers/mtd/nand/raw/stm32_fmc2_nand.c b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
index 999ca6a66036..e63acc077c18 100644
--- a/drivers/mtd/nand/raw/stm32_fmc2_nand.c
+++ b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
@@ -37,6 +37,8 @@
 /* Max ECC buffer length */
 #define FMC2_MAX_ECC_BUF_LEN		(FMC2_BCHDSRS_LEN * FMC2_MAX_SG)
 
+#define FMC2_TIMEOUT_MS			1000
+
 /* Timings */
 #define FMC2_THIZ			1
 #define FMC2_TIO			8000
@@ -530,7 +532,8 @@ static int stm32_fmc2_ham_calculate(struct nand_chip *chip, const u8 *data,
 	int ret;
 
 	ret = readl_relaxed_poll_timeout(fmc2->io_base + FMC2_SR,
-					 sr, sr & FMC2_SR_NWRF, 10, 1000);
+					 sr, sr & FMC2_SR_NWRF, 10,
+					 FMC2_TIMEOUT_MS);
 	if (ret) {
 		dev_err(fmc2->dev, "ham timeout\n");
 		return ret;
@@ -611,7 +614,7 @@ static int stm32_fmc2_bch_calculate(struct nand_chip *chip, const u8 *data,
 
 	/* Wait until the BCH code is ready */
 	if (!wait_for_completion_timeout(&fmc2->complete,
-					 msecs_to_jiffies(1000))) {
+					 msecs_to_jiffies(FMC2_TIMEOUT_MS))) {
 		dev_err(fmc2->dev, "bch timeout\n");
 		stm32_fmc2_disable_bch_irq(fmc2);
 		return -ETIMEDOUT;
@@ -696,7 +699,7 @@ static int stm32_fmc2_bch_correct(struct nand_chip *chip, u8 *dat,
 
 	/* Wait until the decoding error is ready */
 	if (!wait_for_completion_timeout(&fmc2->complete,
-					 msecs_to_jiffies(1000))) {
+					 msecs_to_jiffies(FMC2_TIMEOUT_MS))) {
 		dev_err(fmc2->dev, "bch timeout\n");
 		stm32_fmc2_disable_bch_irq(fmc2);
 		return -ETIMEDOUT;
@@ -969,7 +972,7 @@ static int stm32_fmc2_xfer(struct nand_chip *chip, const u8 *buf,
 
 	/* Wait end of sequencer transfer */
 	if (!wait_for_completion_timeout(&fmc2->complete,
-					 msecs_to_jiffies(1000))) {
+					 msecs_to_jiffies(FMC2_TIMEOUT_MS))) {
 		dev_err(fmc2->dev, "seq timeout\n");
 		stm32_fmc2_disable_seq_irq(fmc2);
 		dmaengine_terminate_all(dma_ch);
@@ -981,7 +984,7 @@ static int stm32_fmc2_xfer(struct nand_chip *chip, const u8 *buf,
 
 	/* Wait DMA data transfer completion */
 	if (!wait_for_completion_timeout(&fmc2->dma_data_complete,
-					 msecs_to_jiffies(100))) {
+					 msecs_to_jiffies(FMC2_TIMEOUT_MS))) {
 		dev_err(fmc2->dev, "data DMA timeout\n");
 		dmaengine_terminate_all(dma_ch);
 		ret = -ETIMEDOUT;
@@ -990,7 +993,7 @@ static int stm32_fmc2_xfer(struct nand_chip *chip, const u8 *buf,
 	/* Wait DMA ECC transfer completion */
 	if (!write_data && !raw) {
 		if (!wait_for_completion_timeout(&fmc2->dma_ecc_complete,
-						 msecs_to_jiffies(100))) {
+					msecs_to_jiffies(FMC2_TIMEOUT_MS))) {
 			dev_err(fmc2->dev, "ECC DMA timeout\n");
 			dmaengine_terminate_all(fmc2->dma_ecc_ch);
 			ret = -ETIMEDOUT;
@@ -1909,6 +1912,12 @@ static int stm32_fmc2_probe(struct platform_device *pdev)
 	}
 
 	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		if (irq != -EPROBE_DEFER)
+			dev_err(dev, "IRQ error missing or invalid\n");
+		return irq;
+	}
+
 	ret = devm_request_irq(dev, irq, stm32_fmc2_irq, 0,
 			       dev_name(dev), fmc2);
 	if (ret) {