summaryrefslogtreecommitdiff
path: root/drivers/net/dsa/ocelot/felix.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2024-07-16 19:28:34 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2024-07-16 19:28:34 -0700
commit51835949dda3783d4639cfa74ce13a3c9829de00 (patch)
tree2b593de5eba6ecc73f7c58fc65fdaffae45c7323 /drivers/net/dsa/ocelot/felix.c
parent0434dbe32053d07d658165be681505120c6b1abc (diff)
parent77ae5e5b00720372af2860efdc4bc652ac682696 (diff)
Merge tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski: "Not much excitement - a handful of large patchsets (devmem among them) did not make it in time. Core & protocols: - Use local_lock in addition to local_bh_disable() to protect per-CPU resources in networking, a step closer for local_bh_disable() not to act as a big lock on PREEMPT_RT - Use flex array for netdevice priv area, ensure its cache alignment - Add a sysctl knob to allow user to specify a default rto_min at socket init time. Bit of a big hammer but multiple companies were independently carrying such patch downstream so clearly it's useful - Support scheduling transmission of packets based on CLOCK_TAI - Un-pin TCP TIMEWAIT timer to avoid it firing on CPUs later cordoned off using cpusets - Support multiple L2TPv3 UDP tunnels using the same 5-tuple address - Allow configuration of multipath hash seed, to both allow synchronizing hashing of two routers, and preventing partial accidental sync - Improve TCP compliance with RFC 9293 for simultaneous connect() - Support sending NAT keepalives in IPsec ESP in UDP states. Userspace IKE daemon had to do this before, but the kernel can better keep track of it - Support sending supervision HSR frames with MAC addresses stored in ProxyNodeTable when RedBox (i.e. HSR-SAN) is enabled - Introduce IPPROTO_SMC for selecting SMC when socket is created - Allow UDP GSO transmit from devices with no checksum offload - openvswitch: add packet sampling via psample, separating the sampled traffic from "upcall" packets sent to user space for forwarding - nf_tables: shrink memory consumption for transaction objects Things we sprinkled into general kernel code: - Power Sequencing subsystem (used by Qualcomm Bluetooth driver for QCA6390) [ Already merged separately - Linus ] - Add IRQ information in sysfs for auxiliary bus - Introduce guard definition for local_lock - Add aligned flavor of __cacheline_group_{begin, end}() markings for grouping fields in structures BPF: - Notify user space (via epoll) when a struct_ops object is getting detached/unregistered - Add new kfuncs for a generic, open-coded bits iterator - Enable BPF programs to declare arrays of kptr, bpf_rb_root, and bpf_list_head - Support resilient split BTF which cuts down on duplication and makes BTF as compact as possible WRT BTF from modules - Add support for dumping kfunc prototypes from BTF which enables both detecting as well as dumping compilable prototypes for kfuncs - riscv64 BPF JIT improvements in particular to add 12-argument support for BPF trampolines and to utilize bpf_prog_pack for the latter - Add the capability to offload the netfilter flowtable in XDP layer through kfuncs Driver API: - Allow users to configure IRQ tresholds between which automatic IRQ moderation can choose - Expand Power Sourcing (PoE) status with power, class and failure reason. Support setting power limits - Track additional RSS contexts in the core, make sure configuration changes don't break them - Support IPsec crypto offload for IPv6 ESP and IPv4 UDP-encapsulated ESP data paths - Support updating firmware on SFP modules Tests and tooling: - mptcp: use net/lib.sh to manage netns - TCP-AO and TCP-MD5: replace debug prints used by tests with tracepoints - openvswitch: make test self-contained (don't depend on OvS CLI tools) Drivers: - Ethernet high-speed NICs: - Broadcom (bnxt): - increase the max total outstanding PTP TX packets to 4 - add timestamping statistics support - implement netdev_queue_mgmt_ops - support new RSS context API - Intel (100G, ice, idpf): - implement FEC statistics and dumping signal quality indicators - support E825C products (with 56Gbps PHYs) - nVidia/Mellanox: - support HW-GRO - mlx4/mlx5: support per-queue statistics via netlink - obey the max number of EQs setting in sub-functions - AMD/Solarflare: - support new RSS context API - AMD/Pensando: - ionic: rework fix for doorbell miss to lower overhead and skip it on new HW - Wangxun: - txgbe: support Flow Director perfect filters - Ethernet NICs consumer, embedded and virtual: - Add driver for Tehuti Networks TN40xx chips - Add driver for Meta's internal NIC chips - Add driver for Ethernet MAC on Airoha EN7581 SoCs - Add driver for Renesas Ethernet-TSN devices - Google cloud vNIC: - flow steering support - Microsoft vNIC: - support page sizes other than 4KB on ARM64 - vmware vNIC: - support latency measurement (update to version 9) - VirtIO net: - support for Byte Queue Limits - support configuring thresholds for automatic IRQ moderation - support for AF_XDP Rx zero-copy - Synopsys (stmmac): - support for STM32MP13 SoC - let platforms select the right PCS implementation - TI: - icssg-prueth: add multicast filtering support - icssg-prueth: enable PTP timestamping and PPS - Renesas: - ravb: improve Rx performance 30-400% by using page pool, theaded NAPI and timer-based IRQ coalescing - ravb: add MII support for R-Car V4M - Cadence (macb): - macb: add ARP support to Wake-On-LAN - Cortina: - use phylib for RX and TX pause configuration - Ethernet switches: - nVidia/Mellanox: - support configuration of multipath hash seed - report more accurate max MTU - use page_pool to improve Rx performance - MediaTek: - mt7530: add support for bridge port isolation - Qualcomm: - qca8k: add support for bridge port isolation - Microchip: - lan9371/2: add 100BaseTX PHY support - NXP: - vsc73xx: implement VLAN operations - Ethernet PHYs: - aquantia: enable support for aqr115c - aquantia: add support for PHY LEDs - realtek: add support for rtl8224 2.5Gbps PHY - xpcs: add memory-mapped device support - add BroadR-Reach link mode and support in Broadcom's PHY driver - CAN: - add document for ISO 15765-2 protocol support - mcp251xfd: workaround for erratum DS80000789E, use timestamps to catch when device returns incorrect FIFO status - WiFi: - mac80211/cfg80211: - parse Transmit Power Envelope (TPE) data in mac80211 instead of in drivers - improvements for 6 GHz regulatory flexibility - multi-link improvements - support multiple radios per wiphy - remove DEAUTH_NEED_MGD_TX_PREP flag - Intel (iwlwifi): - bump FW API to 91 for BZ/SC devices - report 64-bit radiotap timestamp - enable P2P low latency by default - handle Transmit Power Envelope (TPE) advertised by AP - remove support for older FW for new devices - fast resume (keeping the device configured) - mvm: re-enable Multi-Link Operation (MLO) - aggregation (A-MSDU) optimizations - MediaTek (mt76): - mt7925 Multi-Link Operation (MLO) support - Qualcomm (ath10k): - LED support for various chipsets - Qualcomm (ath12k): - remove unsupported Tx monitor handling - support channel 2 in 6 GHz band - support Spatial Multiplexing Power Save (SMPS) in 6 GHz band - supprt multiple BSSID (MBSSID) and Enhanced Multi-BSSID Advertisements (EMA) - support dynamic VLAN - add panic handler for resetting the firmware state - DebugFS support for datapath statistics - WCN7850: support for Wake on WLAN - Microchip (wilc1000): - read MAC address during probe to make it visible to user space - suspend/resume improvements - TI (wl18xx): - support newer firmware versions - RealTek (rtw89): - preparation for RTL8852BE-VT support - Wake on WLAN support for WiFi 6 chips - 36-bit PCI DMA support - RealTek (rtlwifi): - RTL8192DU support - Broadcom (brcmfmac): - Management Frame Protection support (to enable WPA3) - Bluetooth: - qualcomm: use the power sequencer for QCA6390 - btusb: mediatek: add ISO data transmission functions - hci_bcm4377: add BCM4388 support - btintel: add support for BlazarU core - btintel: add support for Whale Peak2 - btnxpuart: add support for AW693 A1 chipset - btnxpuart: add support for IW615 chipset - btusb: add Realtek RTL8852BE support ID 0x13d3:0x3591" * tag 'net-next-6.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1589 commits) eth: fbnic: Fix spelling mistake "tiggerring" -> "triggering" tcp: Replace strncpy() with strscpy() wifi: ath12k: fix build vs old compiler tcp: Don't access uninit tcp_rsk(req)->ao_keyid in tcp_create_openreq_child(). eth: fbnic: Write the TCAM tables used for RSS control and Rx to host eth: fbnic: Add L2 address programming eth: fbnic: Add basic Rx handling eth: fbnic: Add basic Tx handling eth: fbnic: Add link detection eth: fbnic: Add initial messaging to notify FW of our presence eth: fbnic: Implement Rx queue alloc/start/stop/free eth: fbnic: Implement Tx queue alloc/start/stop/free eth: fbnic: Allocate a netdevice and napi vectors with queues eth: fbnic: Add FW communication mechanism eth: fbnic: Add message parsing for FW messages eth: fbnic: Add register init to set PCIe/Ethernet device config eth: fbnic: Allocate core device specific structures and devlink interface eth: fbnic: Add scaffolding for Meta's NIC driver PCI: Add Meta Platforms vendor ID net/sched: cls_flower: propagate tca[TCA_OPTIONS] to NL_REQ_ATTR_CHECK ...
Diffstat (limited to 'drivers/net/dsa/ocelot/felix.c')
-rw-r--r--drivers/net/dsa/ocelot/felix.c114
1 files changed, 93 insertions, 21 deletions
diff --git a/drivers/net/dsa/ocelot/felix.c b/drivers/net/dsa/ocelot/felix.c
index 61e95487732d..e554699f06d4 100644
--- a/drivers/net/dsa/ocelot/felix.c
+++ b/drivers/net/dsa/ocelot/felix.c
@@ -1050,24 +1050,32 @@ static void felix_phylink_get_caps(struct dsa_switch *ds, int port,
config->supported_interfaces);
}
-static void felix_phylink_mac_config(struct dsa_switch *ds, int port,
+static void felix_phylink_mac_config(struct phylink_config *config,
unsigned int mode,
const struct phylink_link_state *state)
{
- struct ocelot *ocelot = ds->priv;
- struct felix *felix = ocelot_to_felix(ocelot);
+ struct dsa_port *dp = dsa_phylink_to_port(config);
+ struct ocelot *ocelot = dp->ds->priv;
+ int port = dp->index;
+ struct felix *felix;
+
+ felix = ocelot_to_felix(ocelot);
if (felix->info->phylink_mac_config)
felix->info->phylink_mac_config(ocelot, port, mode, state);
}
-static struct phylink_pcs *felix_phylink_mac_select_pcs(struct dsa_switch *ds,
- int port,
- phy_interface_t iface)
+static struct phylink_pcs *
+felix_phylink_mac_select_pcs(struct phylink_config *config,
+ phy_interface_t iface)
{
- struct ocelot *ocelot = ds->priv;
- struct felix *felix = ocelot_to_felix(ocelot);
+ struct dsa_port *dp = dsa_phylink_to_port(config);
+ struct ocelot *ocelot = dp->ds->priv;
struct phylink_pcs *pcs = NULL;
+ int port = dp->index;
+ struct felix *felix;
+
+ felix = ocelot_to_felix(ocelot);
if (felix->pcs && felix->pcs[port])
pcs = felix->pcs[port];
@@ -1075,11 +1083,13 @@ static struct phylink_pcs *felix_phylink_mac_select_pcs(struct dsa_switch *ds,
return pcs;
}
-static void felix_phylink_mac_link_down(struct dsa_switch *ds, int port,
+static void felix_phylink_mac_link_down(struct phylink_config *config,
unsigned int link_an_mode,
phy_interface_t interface)
{
- struct ocelot *ocelot = ds->priv;
+ struct dsa_port *dp = dsa_phylink_to_port(config);
+ struct ocelot *ocelot = dp->ds->priv;
+ int port = dp->index;
struct felix *felix;
felix = ocelot_to_felix(ocelot);
@@ -1088,15 +1098,19 @@ static void felix_phylink_mac_link_down(struct dsa_switch *ds, int port,
felix->info->quirks);
}
-static void felix_phylink_mac_link_up(struct dsa_switch *ds, int port,
+static void felix_phylink_mac_link_up(struct phylink_config *config,
+ struct phy_device *phydev,
unsigned int link_an_mode,
phy_interface_t interface,
- struct phy_device *phydev,
int speed, int duplex,
bool tx_pause, bool rx_pause)
{
- struct ocelot *ocelot = ds->priv;
- struct felix *felix = ocelot_to_felix(ocelot);
+ struct dsa_port *dp = dsa_phylink_to_port(config);
+ struct ocelot *ocelot = dp->ds->priv;
+ int port = dp->index;
+ struct felix *felix;
+
+ felix = ocelot_to_felix(ocelot);
ocelot_phylink_mac_link_up(ocelot, port, phydev, link_an_mode,
interface, speed, duplex, tx_pause, rx_pause,
@@ -1220,7 +1234,7 @@ static int felix_get_sset_count(struct dsa_switch *ds, int port, int sset)
}
static int felix_get_ts_info(struct dsa_switch *ds, int port,
- struct ethtool_ts_info *info)
+ struct kernel_ethtool_ts_info *info)
{
struct ocelot *ocelot = ds->priv;
@@ -1583,6 +1597,15 @@ static int felix_setup(struct dsa_switch *ds)
felix_port_qos_map_init(ocelot, dp->index);
}
+ if (felix->info->request_irq) {
+ err = felix->info->request_irq(ocelot);
+ if (err) {
+ dev_err(ocelot->dev, "Failed to request IRQ: %pe\n",
+ ERR_PTR(err));
+ goto out_deinit_ports;
+ }
+ }
+
err = ocelot_devlink_sb_register(ocelot);
if (err)
goto out_deinit_ports;
@@ -2083,7 +2106,14 @@ static void felix_get_mm_stats(struct dsa_switch *ds, int port,
ocelot_port_get_mm_stats(ocelot, port, stats);
}
-const struct dsa_switch_ops felix_switch_ops = {
+static const struct phylink_mac_ops felix_phylink_mac_ops = {
+ .mac_select_pcs = felix_phylink_mac_select_pcs,
+ .mac_config = felix_phylink_mac_config,
+ .mac_link_down = felix_phylink_mac_link_down,
+ .mac_link_up = felix_phylink_mac_link_up,
+};
+
+static const struct dsa_switch_ops felix_switch_ops = {
.get_tag_protocol = felix_get_tag_protocol,
.change_tag_protocol = felix_change_tag_protocol,
.connect_tag_protocol = felix_connect_tag_protocol,
@@ -2104,10 +2134,6 @@ const struct dsa_switch_ops felix_switch_ops = {
.get_sset_count = felix_get_sset_count,
.get_ts_info = felix_get_ts_info,
.phylink_get_caps = felix_phylink_get_caps,
- .phylink_mac_config = felix_phylink_mac_config,
- .phylink_mac_select_pcs = felix_phylink_mac_select_pcs,
- .phylink_mac_link_down = felix_phylink_mac_link_down,
- .phylink_mac_link_up = felix_phylink_mac_link_up,
.port_enable = felix_port_enable,
.port_fast_age = felix_port_fast_age,
.port_fdb_dump = felix_fdb_dump,
@@ -2166,7 +2192,53 @@ const struct dsa_switch_ops felix_switch_ops = {
.port_set_host_flood = felix_port_set_host_flood,
.port_change_conduit = felix_port_change_conduit,
};
-EXPORT_SYMBOL_GPL(felix_switch_ops);
+
+int felix_register_switch(struct device *dev, resource_size_t switch_base,
+ int num_flooding_pgids, bool ptp,
+ bool mm_supported,
+ enum dsa_tag_protocol init_tag_proto,
+ const struct felix_info *info)
+{
+ struct dsa_switch *ds;
+ struct ocelot *ocelot;
+ struct felix *felix;
+ int err;
+
+ felix = devm_kzalloc(dev, sizeof(*felix), GFP_KERNEL);
+ if (!felix)
+ return -ENOMEM;
+
+ ds = devm_kzalloc(dev, sizeof(*ds), GFP_KERNEL);
+ if (!ds)
+ return -ENOMEM;
+
+ dev_set_drvdata(dev, felix);
+
+ ocelot = &felix->ocelot;
+ ocelot->dev = dev;
+ ocelot->num_flooding_pgids = num_flooding_pgids;
+ ocelot->ptp = ptp;
+ ocelot->mm_supported = mm_supported;
+
+ felix->info = info;
+ felix->switch_base = switch_base;
+ felix->ds = ds;
+ felix->tag_proto = init_tag_proto;
+
+ ds->dev = dev;
+ ds->num_ports = info->num_ports;
+ ds->num_tx_queues = OCELOT_NUM_TC;
+ ds->ops = &felix_switch_ops;
+ ds->phylink_mac_ops = &felix_phylink_mac_ops;
+ ds->priv = ocelot;
+
+ err = dsa_register_switch(ds);
+ if (err)
+ dev_err_probe(dev, err, "Failed to register DSA switch\n");
+
+ return err;
+}
+EXPORT_SYMBOL_GPL(felix_register_switch);
struct net_device *felix_port_to_netdev(struct ocelot *ocelot, int port)
{