Merge branch 'iommufd/arm-smmuv3-nested' of iommu/linux into iommufd for-next

Common SMMUv3 patches for the following patches adding nesting, shared
branch with the iommu tree.

* 'iommufd/arm-smmuv3-nested' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/iommu/linux:
  iommu/arm-smmu-v3: Expose the arm_smmu_attach interface
  iommu/arm-smmu-v3: Implement IOMMU_HWPT_ALLOC_NEST_PARENT
  iommu/arm-smmu-v3: Support IOMMU_GET_HW_INFO via struct arm_smmu_hw_info
  iommu/arm-smmu-v3: Report IOMMU_CAP_ENFORCE_CACHE_COHERENCY for CANWBS
  ACPI/IORT: Support CANWBS memory access flag
  ACPICA: IORT: Update for revision E.f
  vfio: Remove VFIO_TYPE1_NESTING_IOMMU
  ...

Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

5 files changed, 44 insertions, 7 deletions

diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index 0783fc121bbb..c39cb119e760 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -27,6 +27,7 @@
 #include <linux/phylink.h>
 #include <linux/etherdevice.h>
 #include <linux/if_bridge.h>
+#include <linux/if_vlan.h>
 #include <net/dsa.h>
 
 #include "b53_regs.h"
@@ -224,6 +225,9 @@ static const struct b53_mib_desc b53_mibs_58xx[] = {
 
 #define B53_MIBS_58XX_SIZE	ARRAY_SIZE(b53_mibs_58xx)
 
+#define B53_MAX_MTU_25		(1536 - ETH_HLEN - VLAN_HLEN - ETH_FCS_LEN)
+#define B53_MAX_MTU		(9720 - ETH_HLEN - VLAN_HLEN - ETH_FCS_LEN)
+
 static int b53_do_vlan_op(struct b53_device *dev, u8 op)
 {
 	unsigned int i;
@@ -2254,20 +2258,25 @@ static int b53_change_mtu(struct dsa_switch *ds, int port, int mtu)
 	bool allow_10_100;
 
 	if (is5325(dev) || is5365(dev))
-		return -EOPNOTSUPP;
+		return 0;
 
 	if (!dsa_is_cpu_port(ds, port))
 		return 0;
 
-	enable_jumbo = (mtu >= JMS_MIN_SIZE);
-	allow_10_100 = (dev->chip_id == BCM583XX_DEVICE_ID);
+	enable_jumbo = (mtu > ETH_DATA_LEN);
+	allow_10_100 = !is63xx(dev);
 
 	return b53_set_jumbo(dev, enable_jumbo, allow_10_100);
 }
 
 static int b53_get_max_mtu(struct dsa_switch *ds, int port)
 {
-	return JMS_MAX_SIZE;
+	struct b53_device *dev = ds->priv;
+
+	if (is5325(dev) || is5365(dev))
+		return B53_MAX_MTU_25;
+
+	return B53_MAX_MTU;
 }
 
 static const struct phylink_mac_ops b53_phylink_mac_ops = {
diff --git a/drivers/net/dsa/b53/b53_spi.c b/drivers/net/dsa/b53/b53_spi.c
index 308f15d3832e..467da057579e 100644
--- a/drivers/net/dsa/b53/b53_spi.c
+++ b/drivers/net/dsa/b53/b53_spi.c
@@ -16,7 +16,7 @@
  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  */
 
-#include <asm/unaligned.h>
+#include <linux/unaligned.h>
 
 #include <linux/delay.h>
 #include <linux/kernel.h>
diff --git a/drivers/net/dsa/lan9303-core.c b/drivers/net/dsa/lan9303-core.c
index 268949939636..d246f95d57ec 100644
--- a/drivers/net/dsa/lan9303-core.c
+++ b/drivers/net/dsa/lan9303-core.c
@@ -6,6 +6,7 @@
 #include <linux/module.h>
 #include <linux/gpio/consumer.h>
 #include <linux/regmap.h>
+#include <linux/iopoll.h>
 #include <linux/mutex.h>
 #include <linux/mii.h>
 #include <linux/of.h>
@@ -839,6 +840,8 @@ static void lan9303_handle_reset(struct lan9303 *chip)
 	if (!chip->reset_gpio)
 		return;
 
+	gpiod_set_value_cansleep(chip->reset_gpio, 1);
+
 	if (chip->reset_duration != 0)
 		msleep(chip->reset_duration);
 
@@ -864,8 +867,34 @@ static int lan9303_disable_processing(struct lan9303 *chip)
 static int lan9303_check_device(struct lan9303 *chip)
 {
 	int ret;
+	int err;
 	u32 reg;
 
+	/* In I2C-managed configurations this polling loop will clash with
+	 * switch's reading of EEPROM right after reset and this behaviour is
+	 * not configurable. While lan9303_read() already has quite long retry
+	 * timeout, seems not all cases are being detected as arbitration error.
+	 *
+	 * According to datasheet, EEPROM loader has 30ms timeout (in case of
+	 * missing EEPROM).
+	 *
+	 * Loading of the largest supported EEPROM is expected to take at least
+	 * 5.9s.
+	 */
+	err = read_poll_timeout(lan9303_read, ret,
+				!ret && reg & LAN9303_HW_CFG_READY,
+				20000, 6000000, false,
+				chip->regmap, LAN9303_HW_CFG, &reg);
+	if (ret) {
+		dev_err(chip->dev, "failed to read HW_CFG reg: %pe\n",
+			ERR_PTR(ret));
+		return ret;
+	}
+	if (err) {
+		dev_err(chip->dev, "HW_CFG not ready: 0x%08x\n", reg);
+		return err;
+	}
+
 	ret = lan9303_read(chip->regmap, LAN9303_CHIP_REV, &reg);
 	if (ret) {
 		dev_err(chip->dev, "failed to read chip revision register: %d\n",
diff --git a/drivers/net/dsa/microchip/ksz_spi.c b/drivers/net/dsa/microchip/ksz_spi.c
index e3e341431f09..1c6652f2b9fe 100644
--- a/drivers/net/dsa/microchip/ksz_spi.c
+++ b/drivers/net/dsa/microchip/ksz_spi.c
@@ -6,7 +6,7 @@
  *	Tristram Ha <Tristram.Ha@microchip.com>
  */
 
-#include <asm/unaligned.h>
+#include <linux/unaligned.h>
 
 #include <linux/delay.h>
 #include <linux/kernel.h>
diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c
index bc7e50dcb57c..d0563ef59acf 100644
--- a/drivers/net/dsa/sja1105/sja1105_main.c
+++ b/drivers/net/dsa/sja1105/sja1105_main.c
@@ -3158,7 +3158,6 @@ static int sja1105_setup(struct dsa_switch *ds)
 	 * TPID is ETH_P_SJA1105, and the VLAN ID is the port pvid.
 	 */
 	ds->vlan_filtering_is_global = true;
-	ds->untag_bridge_pvid = true;
 	ds->fdb_isolation = true;
 	ds->max_num_bridges = DSA_TAG_8021Q_MAX_NUM_BRIDGES;