Merge tag 'asoc-v6.9' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Updates for v6.9

This has been quite a small release, there's a lot of driver specific
cleanups and minor enhancements but hardly anything on the core and only
one new driver.  Highlights include:

 - SoundWire support for AMD ACP 6.3 systems.
 - Support for reporting version information for AVS firmware.
 - Support DSPless mode for Intel Soundwire systems.
 - Support for configuring CS35L56 amplifiers using EFI calibration
   data.
 - Log which component is being operated on as part of power management
   trace events.
 - Support for Microchip SAM9x7, NXP i.MX95 and Qualcomm WCD939x

2 files changed, 35 insertions, 7 deletions

diff --git a/drivers/net/ethernet/intel/e1000e/e1000.h b/drivers/net/ethernet/intel/e1000e/e1000.h
index a187582d2299..ba9c19e6994c 100644
--- a/drivers/net/ethernet/intel/e1000e/e1000.h
+++ b/drivers/net/ethernet/intel/e1000e/e1000.h
@@ -360,23 +360,43 @@ s32 e1000e_get_base_timinca(struct e1000_adapter *adapter, u32 *timinca);
  * As a result, a shift of INCVALUE_SHIFT_n is used to fit a value of
  * INCVALUE_n into the TIMINCA register allowing 32+8+(24-INCVALUE_SHIFT_n)
  * bits to count nanoseconds leaving the rest for fractional nonseconds.
+ *
+ * Any given INCVALUE also has an associated maximum adjustment value. This
+ * maximum adjustment value is the largest increase (or decrease) which can be
+ * safely applied without overflowing the INCVALUE. Since INCVALUE has
+ * a maximum range of 24 bits, its largest value is 0xFFFFFF.
+ *
+ * To understand where the maximum value comes from, consider the following
+ * equation:
+ *
+ *   new_incval = base_incval + (base_incval * adjustment) / 1billion
+ *
+ * To avoid overflow that means:
+ *   max_incval = base_incval + (base_incval * max_adj) / billion
+ *
+ * Re-arranging:
+ *   max_adj = floor(((max_incval - base_incval) * 1billion) / 1billion)
  */
 #define INCVALUE_96MHZ		125
 #define INCVALUE_SHIFT_96MHZ	17
 #define INCPERIOD_SHIFT_96MHZ	2
 #define INCPERIOD_96MHZ		(12 >> INCPERIOD_SHIFT_96MHZ)
+#define MAX_PPB_96MHZ		23999900 /* 23,999,900 ppb */
 
 #define INCVALUE_25MHZ		40
 #define INCVALUE_SHIFT_25MHZ	18
 #define INCPERIOD_25MHZ		1
+#define MAX_PPB_25MHZ		599999900 /* 599,999,900 ppb */
 
 #define INCVALUE_24MHZ		125
 #define INCVALUE_SHIFT_24MHZ	14
 #define INCPERIOD_24MHZ		3
+#define MAX_PPB_24MHZ		999999999 /* 999,999,999 ppb */
 
 #define INCVALUE_38400KHZ	26
 #define INCVALUE_SHIFT_38400KHZ	19
 #define INCPERIOD_38400KHZ	1
+#define MAX_PPB_38400KHZ	230769100 /* 230,769,100 ppb */
 
 /* Another drawback of scaling the incvalue by a large factor is the
  * 64-bit SYSTIM register overflows more quickly.  This is dealt with
diff --git a/drivers/net/ethernet/intel/e1000e/ptp.c b/drivers/net/ethernet/intel/e1000e/ptp.c
index 02d871bc112a..bbcfd529399b 100644
--- a/drivers/net/ethernet/intel/e1000e/ptp.c
+++ b/drivers/net/ethernet/intel/e1000e/ptp.c
@@ -280,8 +280,17 @@ void e1000e_ptp_init(struct e1000_adapter *adapter)
 
 	switch (hw->mac.type) {
 	case e1000_pch2lan:
+		adapter->ptp_clock_info.max_adj = MAX_PPB_96MHZ;
+		break;
 	case e1000_pch_lpt:
+		if (er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_SYSCFI)
+			adapter->ptp_clock_info.max_adj = MAX_PPB_96MHZ;
+		else
+			adapter->ptp_clock_info.max_adj = MAX_PPB_25MHZ;
+		break;
 	case e1000_pch_spt:
+		adapter->ptp_clock_info.max_adj = MAX_PPB_24MHZ;
+		break;
 	case e1000_pch_cnp:
 	case e1000_pch_tgp:
 	case e1000_pch_adp:
@@ -289,15 +298,14 @@ void e1000e_ptp_init(struct e1000_adapter *adapter)
 	case e1000_pch_lnp:
 	case e1000_pch_ptp:
 	case e1000_pch_nvp:
-		if ((hw->mac.type < e1000_pch_lpt) ||
-		    (er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_SYSCFI)) {
-			adapter->ptp_clock_info.max_adj = 24000000 - 1;
-			break;
-		}
-		fallthrough;
+		if (er32(TSYNCRXCTL) & E1000_TSYNCRXCTL_SYSCFI)
+			adapter->ptp_clock_info.max_adj = MAX_PPB_24MHZ;
+		else
+			adapter->ptp_clock_info.max_adj = MAX_PPB_38400KHZ;
+		break;
 	case e1000_82574:
 	case e1000_82583:
-		adapter->ptp_clock_info.max_adj = 600000000 - 1;
+		adapter->ptp_clock_info.max_adj = MAX_PPB_25MHZ;
 		break;
 	default:
 		break;