diff options
| author | Serge Semin <fancer.lancer@gmail.com> | 2024-04-12 21:03:14 +0300 |
|---|---|---|
| committer | Paolo Abeni <pabeni@redhat.com> | 2024-04-16 15:24:53 +0200 |
| commit | 0ebd96f5da4410c0cb8fc75e44f1009530b2f90b (patch) | |
| tree | d1421b44981047a56fc99d28e624cd405ea9951d /drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | |
| parent | 24f4c99e00354fd79bc1f6cbca9961adbd2dc81e (diff) | |
net: stmmac: Apply half-duplex-less constraint for DW QoS Eth only
There are three DW MAC IP-cores which can have the multiple Tx/Rx queues
enabled:
DW GMAC v3.7+ with AV feature,
DW QoS Eth v4.x/v5.x,
DW XGMAC/XLGMAC
Based on the respective HW databooks, only the DW QoS Eth IP-core doesn't
support the half-duplex link mode in case if more than one queues enabled:
"In multiple queue/channel configurations, for half-duplex operation,
enable only the Q0/CH0 on Tx and Rx. For single queue/channel in
full-duplex operation, any queue/channel can be enabled."
The rest of the IP-cores don't have such constraint. Thus in order to have
the constraint applied for the DW QoS Eth MACs only, let's move the it'
implementation to the respective MAC-capabilities getter and make sure the
getter is called in the queues re-init procedure.
Fixes: b6cfffa7ad92 ("stmmac: fix DMA channel hang in half-duplex mode")
Signed-off-by: Serge Semin <fancer.lancer@gmail.com>
Reviewed-by: Romain Gantois <romain.gantois@bootlin.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Diffstat (limited to 'drivers/net/ethernet/stmicro/stmmac/stmmac_main.c')
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 19 |
1 files changed, 3 insertions, 16 deletions
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 24cd80490d19..dd58c21b53ee 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -1198,17 +1198,6 @@ static int stmmac_init_phy(struct net_device *dev) return ret; } -static void stmmac_set_half_duplex(struct stmmac_priv *priv) -{ - /* Half-Duplex can only work with single tx queue */ - if (priv->plat->tx_queues_to_use > 1) - priv->phylink_config.mac_capabilities &= - ~(MAC_10HD | MAC_100HD | MAC_1000HD); - else - priv->phylink_config.mac_capabilities |= - (MAC_10HD | MAC_100HD | MAC_1000HD); -} - static int stmmac_phy_setup(struct stmmac_priv *priv) { struct stmmac_mdio_bus_data *mdio_bus_data; @@ -1237,10 +1226,7 @@ static int stmmac_phy_setup(struct stmmac_priv *priv) priv->phylink_config.supported_interfaces); priv->phylink_config.mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE | - MAC_10FD | MAC_100FD | - MAC_1000FD; - - stmmac_set_half_duplex(priv); + MAC_10 | MAC_100 | MAC_1000; /* Get the MAC specific capabilities */ stmmac_mac_phylink_get_caps(priv); @@ -7355,7 +7341,8 @@ int stmmac_reinit_queues(struct net_device *dev, u32 rx_cnt, u32 tx_cnt) priv->rss.table[i] = ethtool_rxfh_indir_default(i, rx_cnt); - stmmac_set_half_duplex(priv); + stmmac_mac_phylink_get_caps(priv); + stmmac_napi_add(dev); if (netif_running(dev)) |