summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet
diff options
context:
space:
mode:
authorArnd Bergmann <arnd@arndb.de>2013-06-20 02:14:59 +0200
committerArnd Bergmann <arnd@arndb.de>2013-06-20 02:15:45 +0200
commite5051b8472c2fde91e44d906c9a2e516a10b60b2 (patch)
treeb7c27378ca981a7bcf86639db7b0cde834feb0b6 /drivers/net/ethernet
parentc3b693d1d63444afe4fbf809d8a311b63741e503 (diff)
parent3bfbc6cd9b41f937a134ba65a4a1eefba062b9a8 (diff)
Merge tag 'imx-soc-3.11' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/soc
From Shawn Guo: imx soc changes for 3.11: * New SoCs i.MX6 Sololite and Vybrid VF610 support * imx5 and imx6 clock fixes and additions * Update clock driver to use of_clk_init() function * Refactor restart routine mxc_restart() to get it work for DT boot as well * Clean up mxc specific ulpi access ops * imx defconfig updates * tag 'imx-soc-3.11' of git://git.linaro.org/people/shawnguo/linux-2.6: (29 commits) ARM: imx_v6_v7_defconfig: Enable Vybrid VF610 ARM: imx_v6_v7_defconfig: Enable imx-wm8962 by default ARM: clk-imx6qdl: Add clko1 configuration for imx6qdl-sabresd ARM: imx_v6_v7_defconfig: Enable PWM and backlight options ARM: imx: Remove mxc specific ulpi access ops ARM: imx: add initial support for VF610 ARM: imx: add VF610 clock support ARM: imx_v6_v7_defconfig: enable parallel display ARM: imx: clk: No need to initialize phandle struct ARM: imx: irq-common: Include header to avoid sparse warning ARM: imx: Enable mx6 solo-lite support ARM: imx6: use common of_clk_init() call to initialize clocks ARM: imx6q: call of_clk_init() to register fixed rate clocks ARM: imx: imx_v6_v7_defconfig: Select CONFIG_DRM_IMX_TVE ARM: i.MX6: clk: add different DualLite MLB clock config ARM i.MX5: Add S/PDIF clocks ARM i.MX53: Add SATA clock ARM: imx6q: clk: add the eim_slow clock ARM: imx: remove MLB PLL from pllv3 ARM: imx: disable pll8_mlb in mx6q_clks ... Conflicts: arch/arm/Kconfig.debug (simple add/add conflict) Includes an update to 3.10-rc6 Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Diffstat (limited to 'drivers/net/ethernet')
-rw-r--r--drivers/net/ethernet/broadcom/tg3.c10
-rw-r--r--drivers/net/ethernet/dec/tulip/interrupt.c6
-rw-r--r--drivers/net/ethernet/emulex/benet/be_main.c3
-rw-r--r--drivers/net/ethernet/renesas/sh_eth.c19
-rw-r--r--drivers/net/ethernet/stmicro/stmmac/stmmac_main.c2
-rw-r--r--drivers/net/ethernet/ti/davinci_mdio.c14
6 files changed, 38 insertions, 16 deletions
diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c
index 0f493c8dc28b..c777b9013164 100644
--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -1800,6 +1800,9 @@ static int tg3_poll_fw(struct tg3 *tp)
int i;
u32 val;
+ if (tg3_flag(tp, NO_FWARE_REPORTED))
+ return 0;
+
if (tg3_flag(tp, IS_SSB_CORE)) {
/* We don't use firmware. */
return 0;
@@ -10404,6 +10407,13 @@ static int tg3_reset_hw(struct tg3 *tp, bool reset_phy)
*/
static int tg3_init_hw(struct tg3 *tp, bool reset_phy)
{
+ /* Chip may have been just powered on. If so, the boot code may still
+ * be running initialization. Wait for it to finish to avoid races in
+ * accessing the hardware.
+ */
+ tg3_enable_register_access(tp);
+ tg3_poll_fw(tp);
+
tg3_switch_clocks(tp);
tw32(TG3PCI_MEM_WIN_BASE_ADDR, 0);
diff --git a/drivers/net/ethernet/dec/tulip/interrupt.c b/drivers/net/ethernet/dec/tulip/interrupt.c
index 28a5e425fecf..92306b320840 100644
--- a/drivers/net/ethernet/dec/tulip/interrupt.c
+++ b/drivers/net/ethernet/dec/tulip/interrupt.c
@@ -76,6 +76,12 @@ int tulip_refill_rx(struct net_device *dev)
mapping = pci_map_single(tp->pdev, skb->data, PKT_BUF_SZ,
PCI_DMA_FROMDEVICE);
+ if (dma_mapping_error(&tp->pdev->dev, mapping)) {
+ dev_kfree_skb(skb);
+ tp->rx_buffers[entry].skb = NULL;
+ break;
+ }
+
tp->rx_buffers[entry].mapping = mapping;
tp->rx_ring[entry].buffer1 = cpu_to_le32(mapping);
diff --git a/drivers/net/ethernet/emulex/benet/be_main.c b/drivers/net/ethernet/emulex/benet/be_main.c
index 8bc1b21b1c79..a0b4be51f0d1 100644
--- a/drivers/net/ethernet/emulex/benet/be_main.c
+++ b/drivers/net/ethernet/emulex/benet/be_main.c
@@ -4262,6 +4262,9 @@ static int be_probe(struct pci_dev *pdev, const struct pci_device_id *pdev_id)
netdev->features |= NETIF_F_HIGHDMA;
} else {
status = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
+ if (!status)
+ status = dma_set_coherent_mask(&pdev->dev,
+ DMA_BIT_MASK(32));
if (status) {
dev_err(&pdev->dev, "Could not set PCI DMA Mask\n");
goto free_netdev;
diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c
index 42e9dd05c936..5e3982fc5398 100644
--- a/drivers/net/ethernet/renesas/sh_eth.c
+++ b/drivers/net/ethernet/renesas/sh_eth.c
@@ -897,8 +897,8 @@ static int sh_eth_check_reset(struct net_device *ndev)
mdelay(1);
cnt--;
}
- if (cnt < 0) {
- pr_err("Device reset fail\n");
+ if (cnt <= 0) {
+ pr_err("Device reset failed\n");
ret = -ETIMEDOUT;
}
return ret;
@@ -1401,16 +1401,23 @@ static int sh_eth_rx(struct net_device *ndev, u32 intr_status)
desc_status = edmac_to_cpu(mdp, rxdesc->status);
pkt_len = rxdesc->frame_length;
-#if defined(CONFIG_ARCH_R8A7740)
- desc_status >>= 16;
-#endif
-
if (--boguscnt < 0)
break;
if (!(desc_status & RDFEND))
ndev->stats.rx_length_errors++;
+#if defined(CONFIG_ARCH_R8A7740)
+ /*
+ * In case of almost all GETHER/ETHERs, the Receive Frame State
+ * (RFS) bits in the Receive Descriptor 0 are from bit 9 to
+ * bit 0. However, in case of the R8A7740's GETHER, the RFS
+ * bits are from bit 25 to bit 16. So, the driver needs right
+ * shifting by 16.
+ */
+ desc_status >>= 16;
+#endif
+
if (desc_status & (RD_RFS1 | RD_RFS2 | RD_RFS3 | RD_RFS4 |
RD_RFS5 | RD_RFS6 | RD_RFS10)) {
ndev->stats.rx_errors++;
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index 618446ae1ec1..ee919ca8b8a0 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -1899,7 +1899,7 @@ static netdev_tx_t stmmac_xmit(struct sk_buff *skb, struct net_device *dev)
#ifdef STMMAC_XMIT_DEBUG
if (netif_msg_pktdata(priv)) {
- pr_info("%s: curr %d dirty=%d entry=%d, first=%p, nfrags=%d"
+ pr_info("%s: curr %d dirty=%d entry=%d, first=%p, nfrags=%d",
__func__, (priv->cur_tx % txsize),
(priv->dirty_tx % txsize), entry, first, nfrags);
if (priv->extend_desc)
diff --git a/drivers/net/ethernet/ti/davinci_mdio.c b/drivers/net/ethernet/ti/davinci_mdio.c
index 12aec173564c..c47f0dbcebb5 100644
--- a/drivers/net/ethernet/ti/davinci_mdio.c
+++ b/drivers/net/ethernet/ti/davinci_mdio.c
@@ -449,10 +449,9 @@ static int davinci_mdio_suspend(struct device *dev)
__raw_writel(ctrl, &data->regs->control);
wait_for_idle(data);
- pm_runtime_put_sync(data->dev);
-
data->suspended = true;
spin_unlock(&data->lock);
+ pm_runtime_put_sync(data->dev);
return 0;
}
@@ -460,15 +459,12 @@ static int davinci_mdio_suspend(struct device *dev)
static int davinci_mdio_resume(struct device *dev)
{
struct davinci_mdio_data *data = dev_get_drvdata(dev);
- u32 ctrl;
- spin_lock(&data->lock);
pm_runtime_get_sync(data->dev);
+ spin_lock(&data->lock);
/* restart the scan state machine */
- ctrl = __raw_readl(&data->regs->control);
- ctrl |= CONTROL_ENABLE;
- __raw_writel(ctrl, &data->regs->control);
+ __davinci_mdio_reset(data);
data->suspended = false;
spin_unlock(&data->lock);
@@ -477,8 +473,8 @@ static int davinci_mdio_resume(struct device *dev)
}
static const struct dev_pm_ops davinci_mdio_pm_ops = {
- .suspend = davinci_mdio_suspend,
- .resume = davinci_mdio_resume,
+ .suspend_late = davinci_mdio_suspend,
+ .resume_early = davinci_mdio_resume,
};
static const struct of_device_id davinci_mdio_of_mtable[] = {
generated by cgit v1.2.3-70-g09d2 (git 2.48.1) at 2025-03-23 02:13:35 +0000