Merge tag 'wireless-drivers-next-2020-05-07' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
wireless-drivers-next patches for v5.8

First set of patches for v5.8. Changes all over, ath10k apparently
seeing most new features this time. rtw88 also had lots of changes due
to preparation for new hardware support.

In this pull request there's also a new macro to include/linux/iopoll:
read_poll_timeout_atomic(). This is needed by rtw88 for atomic
polling.

Major changes:

ath11k

* add debugfs file for testing ADDBA and DELBA

* add 802.11 encapsulation offload on hardware support

* add htt_peer_stats_reset debugfs file

ath10k

* enable VHT160 and VHT80+80 modes

* enable radar detection in secondary segment

* sdio: disable TX complete indication to improve throughput

* sdio: decrease power consumption

* sdio: add HTT TX bundle support to increase throughput

* sdio: add rx bitrate reporting

ath9k

* improvements to AR9002 calibration logic

carl9170

* remove buggy P2P_GO support

p54usb

* add support for AirVasT USB stick

rtw88

* add support for antenna configuration

ti wlcore

* add support for AES_CMAC cipher

iwlwifi

* support for a few new FW API versions

* new hw configs
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 19 insertions, 12 deletions

diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index f26cc6989dad..22b6937ac225 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -190,6 +190,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.uart_pin_workaround = true,
 		.tx_stats_over_pktlog = false,
 		.bmi_large_size_download = true,
+		.supports_peer_stats_info = true,
 	},
 	{
 		.id = QCA6174_HW_2_1_VERSION,
@@ -723,15 +724,12 @@ static int ath10k_init_sdio(struct ath10k *ar, enum ath10k_firmware_mode mode)
 	if (ret)
 		return ret;
 
-	/* Data transfer is not initiated, when reduced Tx completion
-	 * is used for SDIO. disable it until fixed
-	 */
-	param &= ~HI_ACS_FLAGS_SDIO_REDUCE_TX_COMPL_SET;
+	param |= HI_ACS_FLAGS_SDIO_REDUCE_TX_COMPL_SET;
 
-	/* Alternate credit size of 1544 as used by SDIO firmware is
-	 * not big enough for mac80211 / native wifi frames. disable it
-	 */
-	param &= ~HI_ACS_FLAGS_ALT_DATA_CREDIT_SIZE;
+	if (mode == ATH10K_FIRMWARE_MODE_NORMAL)
+		param |= HI_ACS_FLAGS_ALT_DATA_CREDIT_SIZE;
+	else
+		param &= ~HI_ACS_FLAGS_ALT_DATA_CREDIT_SIZE;
 
 	if (mode == ATH10K_FIRMWARE_MODE_UTF)
 		param &= ~HI_ACS_FLAGS_SDIO_SWAP_MAILBOX_SET;
@@ -2717,7 +2715,7 @@ int ath10k_core_start(struct ath10k *ar, enum ath10k_firmware_mode mode,
 		goto err_hif_stop;
 	}
 
-	status = ath10k_hif_swap_mailbox(ar);
+	status = ath10k_hif_start_post(ar);
 	if (status) {
 		ath10k_err(ar, "failed to swap mailbox: %d\n", status);
 		goto err_hif_stop;
@@ -3280,6 +3278,7 @@ struct ath10k *ath10k_core_create(size_t priv_size, struct device *dev,
 	init_completion(&ar->thermal.wmi_sync);
 	init_completion(&ar->bss_survey_done);
 	init_completion(&ar->peer_delete_done);
+	init_completion(&ar->peer_stats_info_complete);
 
 	INIT_DELAYED_WORK(&ar->scan.timeout, ath10k_scan_timeout_work);
 
@@ -3291,6 +3290,11 @@ struct ath10k *ath10k_core_create(size_t priv_size, struct device *dev,
 	if (!ar->workqueue_aux)
 		goto err_free_wq;
 
+	ar->workqueue_tx_complete =
+		create_singlethread_workqueue("ath10k_tx_complete_wq");
+	if (!ar->workqueue_tx_complete)
+		goto err_free_aux_wq;
+
 	mutex_init(&ar->conf_mutex);
 	mutex_init(&ar->dump_mutex);
 	spin_lock_init(&ar->data_lock);
@@ -3318,7 +3322,7 @@ struct ath10k *ath10k_core_create(size_t priv_size, struct device *dev,
 
 	ret = ath10k_coredump_create(ar);
 	if (ret)
-		goto err_free_aux_wq;
+		goto err_free_tx_complete;
 
 	ret = ath10k_debug_create(ar);
 	if (ret)
@@ -3328,12 +3332,12 @@ struct ath10k *ath10k_core_create(size_t priv_size, struct device *dev,
 
 err_free_coredump:
 	ath10k_coredump_destroy(ar);
-
+err_free_tx_complete:
+	destroy_workqueue(ar->workqueue_tx_complete);
 err_free_aux_wq:
 	destroy_workqueue(ar->workqueue_aux);
 err_free_wq:
 	destroy_workqueue(ar->workqueue);
-
 err_free_mac:
 	ath10k_mac_destroy(ar);
 
@@ -3349,6 +3353,9 @@ void ath10k_core_destroy(struct ath10k *ar)
 	flush_workqueue(ar->workqueue_aux);
 	destroy_workqueue(ar->workqueue_aux);
 
+	flush_workqueue(ar->workqueue_tx_complete);
+	destroy_workqueue(ar->workqueue_tx_complete);
+
 	ath10k_debug_destroy(ar);
 	ath10k_coredump_destroy(ar);
 	ath10k_htt_tx_destroy(&ar->htt);