Merge series "Support ROHM BD9576MUF and BD9573MUF PMICs" from Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>:

Initial support for ROHM BD9576MUF and BD9573MUF PMICs.

These PMICs are primarily intended to be used to power the R-Car family
processors. BD9576MUF includes some additional safety features the
BD9573MUF does not have. This initial version of drivers does not
utilize these features and for now the SW behaviour is identical.

Please note that this version of drivers is only tested on BD9576MUF
but according to the data-sheets the relevant parts of registers should
be same so drivers should also work on BD9573MUF.

This patch series includes MFD, watchdog and regulator drivers with
basic functionality such as:

- Enabling and pinging the watchdog
- configuring watchog timeout / window from device-tree
- reading regulator states/voltages
- enabling/disabling VOUT1 (VD50) when control mode B is used.

This patch series does not bring interrupt support. BD9576MUF and BD9573MUF
are designed to keep the IRQ line low for whole duration of error
condition. IRQ can't be 'acked'. So proper IRQ support would require
some IRQ limiter implementation (delayed unmask?) in order to not hog
the CPU.

---

Matti Vaittinen (6):
  dt_bindings: mfd: Add ROHM BD9576MUF and BD9573MUF PMICs
  dt_bindings: regulator: Add ROHM BD9576MUF and BD9573MUF PMICs
  mfd: Support ROHM BD9576MUF and BD9573MUF
  wdt: Support wdt on ROHM BD9576MUF and BD9573MUF
  regulator: Support ROHM BD9576MUF and BD9573MUF
  MAINTAINERS: Add ROHM BD9576MUF and BD9573MUF drivers

 .../bindings/mfd/rohm,bd9576-pmic.yaml        | 129 +++++++
 .../regulator/rohm,bd9576-regulator.yaml      |  33 ++
 MAINTAINERS                                   |   4 +
 drivers/mfd/Kconfig                           |  11 +
 drivers/mfd/Makefile                          |   1 +
 drivers/mfd/rohm-bd9576.c                     | 130 +++++++
 drivers/regulator/Kconfig                     |  10 +
 drivers/regulator/Makefile                    |   1 +
 drivers/regulator/bd9576-regulator.c          | 337 ++++++++++++++++++
 drivers/watchdog/Kconfig                      |  13 +
 drivers/watchdog/Makefile                     |   1 +
 drivers/watchdog/bd9576_wdt.c                 | 295 +++++++++++++++
 include/linux/mfd/rohm-bd957x.h               |  61 ++++
 include/linux/mfd/rohm-generic.h              |   2 +
 14 files changed, 1028 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/rohm,bd9576-pmic.yaml
 create mode 100644 Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml
 create mode 100644 drivers/mfd/rohm-bd9576.c
 create mode 100644 drivers/regulator/bd9576-regulator.c
 create mode 100644 drivers/watchdog/bd9576_wdt.c
 create mode 100644 include/linux/mfd/rohm-bd957x.h

base-commit: f4d51dffc6c01a9e94650d95ce0104964f8ae822
--
2.21.0

--
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND

~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
Simon says - in Latin please.
~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~
Thanks to Simon Glass for the translation =]

1 files changed, 26 insertions, 43 deletions

diff --git a/drivers/nvme/host/multipath.c b/drivers/nvme/host/multipath.c
index 3ded54d2c9c6..d4ba736c6c89 100644
--- a/drivers/nvme/host/multipath.c
+++ b/drivers/nvme/host/multipath.c
@@ -65,51 +65,30 @@ void nvme_set_disk_name(char *disk_name, struct nvme_ns *ns,
 	}
 }
 
-bool nvme_failover_req(struct request *req)
+void nvme_failover_req(struct request *req)
 {
 	struct nvme_ns *ns = req->q->queuedata;
-	u16 status = nvme_req(req)->status;
+	u16 status = nvme_req(req)->status & 0x7ff;
 	unsigned long flags;
 
-	switch (status & 0x7ff) {
-	case NVME_SC_ANA_TRANSITION:
-	case NVME_SC_ANA_INACCESSIBLE:
-	case NVME_SC_ANA_PERSISTENT_LOSS:
-		/*
-		 * If we got back an ANA error we know the controller is alive,
-		 * but not ready to serve this namespaces.  The spec suggests
-		 * we should update our general state here, but due to the fact
-		 * that the admin and I/O queues are not serialized that is
-		 * fundamentally racy.  So instead just clear the current path,
-		 * mark the the path as pending and kick of a re-read of the ANA
-		 * log page ASAP.
-		 */
-		nvme_mpath_clear_current_path(ns);
-		if (ns->ctrl->ana_log_buf) {
-			set_bit(NVME_NS_ANA_PENDING, &ns->flags);
-			queue_work(nvme_wq, &ns->ctrl->ana_work);
-		}
-		break;
-	case NVME_SC_HOST_PATH_ERROR:
-	case NVME_SC_HOST_ABORTED_CMD:
-		/*
-		 * Temporary transport disruption in talking to the controller.
-		 * Try to send on a new path.
-		 */
-		nvme_mpath_clear_current_path(ns);
-		break;
-	default:
-		/* This was a non-ANA error so follow the normal error path. */
-		return false;
+	nvme_mpath_clear_current_path(ns);
+
+	/*
+	 * If we got back an ANA error, we know the controller is alive but not
+	 * ready to serve this namespace.  Kick of a re-read of the ANA
+	 * information page, and just try any other available path for now.
+	 */
+	if (nvme_is_ana_error(status) && ns->ctrl->ana_log_buf) {
+		set_bit(NVME_NS_ANA_PENDING, &ns->flags);
+		queue_work(nvme_wq, &ns->ctrl->ana_work);
 	}
 
 	spin_lock_irqsave(&ns->head->requeue_lock, flags);
 	blk_steal_bios(&ns->head->requeue_list, req);
 	spin_unlock_irqrestore(&ns->head->requeue_lock, flags);
-	blk_mq_end_request(req, 0);
 
+	blk_mq_end_request(req, 0);
 	kblockd_schedule_work(&ns->head->requeue_work);
-	return true;
 }
 
 void nvme_kick_requeue_lists(struct nvme_ctrl *ctrl)
@@ -233,7 +212,7 @@ static struct nvme_ns *nvme_next_ns(struct nvme_ns_head *head,
 static struct nvme_ns *nvme_round_robin_path(struct nvme_ns_head *head,
 		int node, struct nvme_ns *old)
 {
-	struct nvme_ns *ns, *found, *fallback = NULL;
+	struct nvme_ns *ns, *found = NULL;
 
 	if (list_is_singular(&head->list)) {
 		if (nvme_path_is_disabled(old))
@@ -252,18 +231,22 @@ static struct nvme_ns *nvme_round_robin_path(struct nvme_ns_head *head,
 			goto out;
 		}
 		if (ns->ana_state == NVME_ANA_NONOPTIMIZED)
-			fallback = ns;
+			found = ns;
 	}
 
-	/* No optimized path found, re-check the current path */
+	/*
+	 * The loop above skips the current path for round-robin semantics.
+	 * Fall back to the current path if either:
+	 *  - no other optimized path found and current is optimized,
+	 *  - no other usable path found and current is usable.
+	 */
 	if (!nvme_path_is_disabled(old) &&
-	    old->ana_state == NVME_ANA_OPTIMIZED) {
-		found = old;
-		goto out;
-	}
-	if (!fallback)
+	    (old->ana_state == NVME_ANA_OPTIMIZED ||
+	     (!found && old->ana_state == NVME_ANA_NONOPTIMIZED)))
+		return old;
+
+	if (!found)
 		return NULL;
-	found = fallback;
 out:
 	rcu_assign_pointer(head->current_path[node], found);
 	return found;