Merge tag 'pci-v5.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull pci updates from Bjorn Helgaas:
 "Resource management:

   - Restrict E820 clipping to PCI host bridge windows (Bjorn Helgaas)

   - Log E820 clipping better (Bjorn Helgaas)

   - Add kernel cmdline options to enable/disable E820 clipping (Hans de
     Goede)

   - Disable E820 reserved region clipping for IdeaPads, Yoga, Yoga
     Slip, Acer Spin 5, Clevo Barebone systems where clipping leaves no
     usable address space for touchpads, Thunderbolt devices, etc (Hans
     de Goede)

   - Disable E820 clipping by default starting in 2023 (Hans de Goede)

  PCI device hotplug:

   - Include files to remove implicit dependencies (Christophe Leroy)

   - Only put Root Ports in D3 if they can signal and wake from D3 so
     AMD Yellow Carp doesn't miss hotplug events (Mario Limonciello)

  Power management:

   - Define pci_restore_standard_config() only for CONFIG_PM_SLEEP since
     it's unused otherwise (Krzysztof Kozlowski)

   - Power up devices completely, including anything platform firmware
     needs to do, during runtime resume (Rafael J. Wysocki)

   - Move pci_resume_bus() to PM callbacks so we observe the required
     bridge power-up delays (Rafael J. Wysocki)

   - Drop unneeded runtime_d3cold device flag (Rafael J. Wysocki)

   - Split pci_raw_set_power_state() between pci_power_up() and a new
     pci_set_low_power_state() (Rafael J. Wysocki)

   - Set current_state to D3cold if config read returns ~0, indicating
     the device is not accessible (Rafael J. Wysocki)

   - Do not call pci_update_current_state() from pci_power_up() so BARs
     and ASPM config are restored correctly (Rafael J. Wysocki)

   - Write 0 to PMCSR in pci_power_up() in all cases (Rafael J. Wysocki)

   - Split pci_power_up() to pci_set_full_power_state() to avoid some
     redundant operations (Rafael J. Wysocki)

   - Skip restoring BARs if device is not in D0 (Rafael J. Wysocki)

   - Rearrange and clarify pci_set_power_state() (Rafael J. Wysocki)

   - Remove redundant BAR restores from pci_pm_thaw_noirq() (Rafael J.
     Wysocki)

  Virtualization:

   - Acquire device lock before config space access lock to avoid AB/BA
     deadlock with sriov_numvfs_store() (Yicong Yang)

  Error handling:

   - Clear MULTI_ERR_COR/UNCOR_RCV bits, which a race could previously
     leave permanently set (Kuppuswamy Sathyanarayanan)

  Peer-to-peer DMA:

   - Whitelist Intel Skylake-E Root Ports regardless of which devfn they
     are (Shlomo Pongratz)

  ASPM:

   - Override L1 acceptable latency advertised by Intel DG2 so ASPM L1
     can be enabled (Mika Westerberg)

  Cadence PCIe controller driver:

   - Set up device-specific register to allow PTM Responder to be
     enabled by the normal architected bit (Christian Gmeiner)

   - Override advertised FLR support since the controller doesn't
     implement FLR correctly (Parshuram Thombare)

  Cadence PCIe endpoint driver:

   - Correct bitmap size for the ob_region_map of outbound window usage
     (Dan Carpenter)

  Freescale i.MX6 PCIe controller driver:

   - Fix PERST# assertion/deassertion so we observe the required delays
     before accessing device (Francesco Dolcini)

  Freescale Layerscape PCIe controller driver:

   - Add "big-endian" DT property (Hou Zhiqiang)

   - Update SCFG DT property (Hou Zhiqiang)

   - Add "aer", "pme", "intr" DT properties (Li Yang)

   - Add DT compatible strings for ls1028a (Xiaowei Bao)

  Intel VMD host bridge driver:

   - Assign VMD IRQ domain before enumeration to avoid IOMMU interrupt
     remapping errors when MSI-X remapping is disabled (Nirmal Patel)

   - Revert VMD workaround that kept MSI-X remapping enabled when IOMMU
     remapping was enabled (Nirmal Patel)

  Marvell MVEBU PCIe controller driver:

   - Add of_pci_get_slot_power_limit() to parse the
     'slot-power-limit-milliwatt' DT property (Pali Rohár)

   - Add mvebu support for sending Set_Slot_Power_Limit message (Pali
     Rohár)

  MediaTek PCIe controller driver:

   - Fix refcount leak in mtk_pcie_subsys_powerup() (Miaoqian Lin)

  MediaTek PCIe Gen3 controller driver:

   - Reset PHY and MAC at probe time (AngeloGioacchino Del Regno)

  Microchip PolarFlare PCIe controller driver:

   - Add chained_irq_enter()/chained_irq_exit() calls to mc_handle_msi()
     and mc_handle_intx() to avoid lost interrupts (Conor Dooley)

   - Fix interrupt handling race (Daire McNamara)

  NVIDIA Tegra194 PCIe controller driver:

   - Drop tegra194 MSI register save/restore, which is unnecessary since
     the DWC core does it (Jisheng Zhang)

  Qualcomm PCIe controller driver:

   - Add SM8150 SoC DT binding and support (Bhupesh Sharma)

   - Fix pipe clock imbalance (Johan Hovold)

   - Fix runtime PM imbalance on probe errors (Johan Hovold)

   - Fix PHY init imbalance on probe errors (Johan Hovold)

   - Convert DT binding to YAML (Dmitry Baryshkov)

   - Update DT binding to show that resets aren't required for
     MSM8996/APQ8096 platforms (Dmitry Baryshkov)

   - Add explicit register names per chipset in DT binding (Dmitry
     Baryshkov)

   - Add sc7280-specific clock and reset definitions to DT binding
     (Dmitry Baryshkov)

  Rockchip PCIe controller driver:

   - Fix bitmap size when searching for free outbound region (Dan
     Carpenter)

  Rockchip DesignWare PCIe controller driver:

   - Remove "snps,dw-pcie" from rockchip-dwc DT "compatible" property
     because it's not fully compatible with rockchip (Peter Geis)

   - Reset rockchip-dwc controller at probe (Peter Geis)

   - Add rockchip-dwc INTx support (Peter Geis)

  Synopsys DesignWare PCIe controller driver:

   - Return error instead of success if DMA mapping of MSI area fails
     (Jiantao Zhang)

  Miscellaneous:

   - Change pci_set_dma_mask() documentation references to
     dma_set_mask() (Alex Williamson)"

* tag 'pci-v5.19-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (64 commits)
  dt-bindings: PCI: qcom: Add schema for sc7280 chipset
  dt-bindings: PCI: qcom: Specify reg-names explicitly
  dt-bindings: PCI: qcom: Do not require resets on msm8996 platforms
  dt-bindings: PCI: qcom: Convert to YAML
  PCI: qcom: Fix unbalanced PHY init on probe errors
  PCI: qcom: Fix runtime PM imbalance on probe errors
  PCI: qcom: Fix pipe clock imbalance
  PCI: qcom: Add SM8150 SoC support
  dt-bindings: pci: qcom: Document PCIe bindings for SM8150 SoC
  x86/PCI: Disable E820 reserved region clipping starting in 2023
  x86/PCI: Disable E820 reserved region clipping via quirks
  x86/PCI: Add kernel cmdline options to use/ignore E820 reserved regions
  PCI: microchip: Fix potential race in interrupt handling
  PCI/AER: Clear MULTI_ERR_COR/UNCOR_RCV bits
  PCI: cadence: Clear FLR in device capabilities register
  PCI: cadence: Allow PTM Responder to be enabled
  PCI: vmd: Revert 2565e5b69c44 ("PCI: vmd: Do not disable MSI-X remapping if interrupt remapping is enabled by IOMMU.")
  PCI: vmd: Assign VMD IRQ domain before enumeration
  PCI: Avoid pci_dev_lock() AB/BA deadlock with sriov_numvfs_store()
  PCI: rockchip-dwc: Add legacy interrupt support
  ...

1 files changed, 30 insertions, 11 deletions

diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
index 3787876ecb24..3760d85c10d2 100644
--- a/drivers/pci/pci-acpi.c
+++ b/drivers/pci/pci-acpi.c
@@ -974,9 +974,11 @@ bool acpi_pci_power_manageable(struct pci_dev *dev)
 
 bool acpi_pci_bridge_d3(struct pci_dev *dev)
 {
-	const union acpi_object *obj;
-	struct acpi_device *adev;
 	struct pci_dev *rpdev;
+	struct acpi_device *adev;
+	acpi_status status;
+	unsigned long long state;
+	const union acpi_object *obj;
 
 	if (acpi_pci_disabled || !dev->is_hotplug_bridge)
 		return false;
@@ -985,12 +987,6 @@ bool acpi_pci_bridge_d3(struct pci_dev *dev)
 	if (acpi_pci_power_manageable(dev))
 		return true;
 
-	/*
-	 * The ACPI firmware will provide the device-specific properties through
-	 * _DSD configuration object. Look for the 'HotPlugSupportInD3' property
-	 * for the root port and if it is set we know the hierarchy behind it
-	 * supports D3 just fine.
-	 */
 	rpdev = pcie_find_root_port(dev);
 	if (!rpdev)
 		return false;
@@ -999,11 +995,34 @@ bool acpi_pci_bridge_d3(struct pci_dev *dev)
 	if (!adev)
 		return false;
 
-	if (acpi_dev_get_property(adev, "HotPlugSupportInD3",
-				   ACPI_TYPE_INTEGER, &obj) < 0)
+	/*
+	 * If the Root Port cannot signal wakeup signals at all, i.e., it
+	 * doesn't supply a wakeup GPE via _PRW, it cannot signal hotplug
+	 * events from low-power states including D3hot and D3cold.
+	 */
+	if (!adev->wakeup.flags.valid)
 		return false;
 
-	return obj->integer.value == 1;
+	/*
+	 * If the Root Port cannot wake itself from D3hot or D3cold, we
+	 * can't use D3.
+	 */
+	status = acpi_evaluate_integer(adev->handle, "_S0W", NULL, &state);
+	if (ACPI_SUCCESS(status) && state < ACPI_STATE_D3_HOT)
+		return false;
+
+	/*
+	 * The "HotPlugSupportInD3" property in a Root Port _DSD indicates
+	 * the Port can signal hotplug events while in D3.  We assume any
+	 * bridges *below* that Root Port can also signal hotplug events
+	 * while in D3.
+	 */
+	if (!acpi_dev_get_property(adev, "HotPlugSupportInD3",
+				   ACPI_TYPE_INTEGER, &obj) &&
+	    obj->integer.value == 1)
+		return true;
+
+	return false;
 }
 
 int acpi_pci_set_power_state(struct pci_dev *dev, pci_power_t state)