Merge tag 'regulator-v5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator updates from Mark Brown:
 "The biggest chunk of the regulator changes for this release outside of
  the new drivers is the conversion of the fixed regulator to use the
  GPIO descriptor API, there's a small addition to the GPIO API plus a
  bunch of updates to board files to implement it. This is some really
  welcome work from Linus Walleij that's had a bunch of review and has
  been sitting in -next for a while so I'm fairly happy there's no major
  issues.

   - Helpers for overlapping linear ranges.

   - Display opmode and consumer requested load in the regualtor_summary
     file in debugfs, plus a fix there.

   - Support for the fun and entertaining power off mechanism that the
     pfuze100 hardware implements.

   - Conversion of the fixed regulator API to use GPIO descriptors,
     including pulling in a bunch of patches to a bunch of board files.

   - New drivers for Cirrus Logic Lochnagar, Qualcomm PMS405, Rohm
     BD71847, ST PMIC1, and TI LM363x devices"

* tag 'regulator-v5.0' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (36 commits)
  regulator: lochnagar: Use a consisent comment style for SPDX header
  regulator: bd718x7: Remove struct bd718xx_pmic
  regulator: Fetch enable gpiods nonexclusive
  regulator/gpio: Allow nonexclusive GPIO access
  regulator: lochnagar: Add support for the Cirrus Logic Lochnagar
  regulator: stpmic1: Return REGULATOR_MODE_INVALID for invalid mode
  regulator: stpmic1: add stpmic1 regulator driver
  dt-bindings: regulator: document stpmic1 pmic regulators
  regulator: axp20x: Mark expected switch fall-throughs
  regulator: bd718xx: fix build warning on x86_64
  regulator: fixed: Default enable high on DT regulators
  regulator: bd718xx: rename bd71837 to 718xx
  regulator: bd718XX use pickable ranges
  regulator/mfd: bd718xx: rename bd71837/bd71847 common instances
  regulator: Support regulators where voltage ranges are selectable
  mfd: dt bindings: add BD71847 device-tree binding documentation
  regulator: dt bindings: add BD71847 device-tree binding documentation
  regulator/mfd: Support ROHM BD71847 power management IC
  regulator: da905{2,5}: Remove unnecessary array check
  regulator: qcom: Add PMS405 regulators
  ...

28 files changed, 2651 insertions, 790 deletions

diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 329cdd33ed62..926cee0d0b5f 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -189,7 +189,7 @@ config REGULATOR_BD718XX
 	  and LDO regulators.
 
 	  This driver can also be built as a module. If so, the module
-	  will be called bd71837-regulator.
+	  will be called bd718x7-regulator.
 
 config REGULATOR_BD9571MWV
 	tristate "ROHM BD9571MWV Regulators"
@@ -356,6 +356,13 @@ config REGULATOR_LM363X
 	  One boost output voltage is configurable and always on.
 	  Other LDOs are used for the display module.
 
+config REGULATOR_LOCHNAGAR
+	tristate "Cirrus Logic Lochnagar regulator driver"
+	depends on MFD_LOCHNAGAR
+	help
+	  This enables regulator support on the Cirrus Logic Lochnagar audio
+	  development board.
+
 config REGULATOR_LP3971
 	tristate "National Semiconductors LP3971 PMIC regulator driver"
 	depends on I2C
@@ -803,6 +810,18 @@ config REGULATOR_STM32_VREFBUF
 	  This driver can also be built as a module. If so, the module
 	  will be called stm32-vrefbuf.
 
+config REGULATOR_STPMIC1
+	tristate "STMicroelectronics STPMIC1 PMIC Regulators"
+	depends on MFD_STPMIC1
+	help
+	  This driver supports STMicroelectronics STPMIC1 PMIC voltage
+	  regulators and switches. The STPMIC1 regulators supply power to
+	  an application processor as well as to external system
+	  peripherals such as DDR, Flash memories and system devices.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called stpmic1_regulator.
+
 config REGULATOR_TI_ABB
 	tristate "TI Adaptive Body Bias on-chip LDO"
 	depends on ARCH_OMAP
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 801d9a34a203..72488ef11b8a 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -27,7 +27,7 @@ obj-$(CONFIG_REGULATOR_AS3711) += as3711-regulator.o
 obj-$(CONFIG_REGULATOR_AS3722) += as3722-regulator.o
 obj-$(CONFIG_REGULATOR_AXP20X) += axp20x-regulator.o
 obj-$(CONFIG_REGULATOR_BCM590XX) += bcm590xx-regulator.o
-obj-$(CONFIG_REGULATOR_BD718XX) += bd71837-regulator.o
+obj-$(CONFIG_REGULATOR_BD718XX) += bd718x7-regulator.o
 obj-$(CONFIG_REGULATOR_BD9571MWV) += bd9571mwv-regulator.o
 obj-$(CONFIG_REGULATOR_DA903X)	+= da903x.o
 obj-$(CONFIG_REGULATOR_DA9052)	+= da9052-regulator.o
@@ -46,6 +46,7 @@ obj-$(CONFIG_REGULATOR_HI655X) += hi655x-regulator.o
 obj-$(CONFIG_REGULATOR_ISL6271A) += isl6271a-regulator.o
 obj-$(CONFIG_REGULATOR_ISL9305) += isl9305.o
 obj-$(CONFIG_REGULATOR_LM363X) += lm363x-regulator.o
+obj-$(CONFIG_REGULATOR_LOCHNAGAR) += lochnagar-regulator.o
 obj-$(CONFIG_REGULATOR_LP3971) += lp3971.o
 obj-$(CONFIG_REGULATOR_LP3972) += lp3972.o
 obj-$(CONFIG_REGULATOR_LP872X) += lp872x.o
@@ -101,6 +102,7 @@ obj-$(CONFIG_REGULATOR_S5M8767) += s5m8767.o
 obj-$(CONFIG_REGULATOR_SC2731) += sc2731-regulator.o
 obj-$(CONFIG_REGULATOR_SKY81452) += sky81452-regulator.o
 obj-$(CONFIG_REGULATOR_STM32_VREFBUF) += stm32-vrefbuf.o
+obj-$(CONFIG_REGULATOR_STPMIC1) += stpmic1_regulator.o
 obj-$(CONFIG_REGULATOR_STW481X_VMMC) += stw481x-vmmc.o
 obj-$(CONFIG_REGULATOR_SY8106A) += sy8106a-regulator.o
 obj-$(CONFIG_REGULATOR_TI_ABB) += ti-abb-regulator.o
diff --git a/drivers/regulator/arizona-ldo1.c b/drivers/regulator/arizona-ldo1.c
index e976d073f28d..9a72eae4926d 100644
--- a/drivers/regulator/arizona-ldo1.c
+++ b/drivers/regulator/arizona-ldo1.c
@@ -260,7 +260,7 @@ static int arizona_ldo1_common_init(struct platform_device *pdev,
 	 * so clean up would happen at the wrong time
 	 */
 	config.ena_gpiod = gpiod_get_optional(parent_dev, "wlf,ldoena",
-					      GPIOD_OUT_LOW);
+				GPIOD_OUT_LOW | GPIOD_FLAGS_BIT_NONEXCLUSIVE);
 	if (IS_ERR(config.ena_gpiod))
 		return PTR_ERR(config.ena_gpiod);
 
diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c
index 91b8ff8bac15..a3734039a86a 100644
--- a/drivers/regulator/axp20x-regulator.c
+++ b/drivers/regulator/axp20x-regulator.c
@@ -509,10 +509,10 @@ static int axp20x_set_dcdc_freq(struct platform_device *pdev, u32 dcdcfreq)
 		/*
 		 * AXP803/AXP813 DCDC work frequency setting has the same
 		 * range and step as AXP22X, but at a different register.
-		 * Fall through to the check below.
 		 * (See include/linux/mfd/axp20x.h)
 		 */
 		reg = AXP803_DCDC_FREQ_CTRL;
+		/* Fall through to the check below.*/
 	case AXP806_ID:
 		/*
 		 * AXP806 also have DCDC work frequency setting register at a
@@ -520,6 +520,7 @@ static int axp20x_set_dcdc_freq(struct platform_device *pdev, u32 dcdcfreq)
 		 */
 		if (axp20x->variant == AXP806_ID)
 			reg = AXP806_DCDC_FREQ_CTRL;
+		/* Fall through */
 	case AXP221_ID:
 	case AXP223_ID:
 	case AXP809_ID:
diff --git a/drivers/regulator/bd71837-regulator.c b/drivers/regulator/bd71837-regulator.c
deleted file mode 100644
index a1bd8aaf4d98..000000000000
--- a/drivers/regulator/bd71837-regulator.c
+++ /dev/null
@@ -1,645 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2018 ROHM Semiconductors
-// bd71837-regulator.c ROHM BD71837MWV regulator driver
-
-#include <linux/delay.h>
-#include <linux/err.h>
-#include <linux/gpio.h>
-#include <linux/interrupt.h>
-#include <linux/kernel.h>
-#include <linux/mfd/rohm-bd718x7.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/driver.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/of_regulator.h>
-#include <linux/slab.h>
-
-struct bd71837_pmic {
-	struct regulator_desc descs[BD71837_REGULATOR_CNT];
-	struct bd71837 *mfd;
-	struct platform_device *pdev;
-	struct regulator_dev *rdev[BD71837_REGULATOR_CNT];
-};
-
-/*
- * BUCK1/2/3/4
- * BUCK1RAMPRATE[1:0] BUCK1 DVS ramp rate setting
- * 00: 10.00mV/usec 10mV 1uS
- * 01: 5.00mV/usec	10mV 2uS
- * 10: 2.50mV/usec	10mV 4uS
- * 11: 1.25mV/usec	10mV 8uS
- */
-static int bd71837_buck1234_set_ramp_delay(struct regulator_dev *rdev,
-					   int ramp_delay)
-{
-	struct bd71837_pmic *pmic = rdev_get_drvdata(rdev);
-	struct bd71837 *mfd = pmic->mfd;
-	int id = rdev->desc->id;
-	unsigned int ramp_value = BUCK_RAMPRATE_10P00MV;
-
-	dev_dbg(&pmic->pdev->dev, "Buck[%d] Set Ramp = %d\n", id + 1,
-		ramp_delay);
-	switch (ramp_delay) {
-	case 1 ... 1250:
-		ramp_value = BUCK_RAMPRATE_1P25MV;
-		break;
-	case 1251 ... 2500:
-		ramp_value = BUCK_RAMPRATE_2P50MV;
-		break;
-	case 2501 ... 5000:
-		ramp_value = BUCK_RAMPRATE_5P00MV;
-		break;
-	case 5001 ... 10000:
-		ramp_value = BUCK_RAMPRATE_10P00MV;
-		break;
-	default:
-		ramp_value = BUCK_RAMPRATE_10P00MV;
-		dev_err(&pmic->pdev->dev,
-			"%s: ramp_delay: %d not supported, setting 10000mV//us\n",
-			rdev->desc->name, ramp_delay);
-	}
-
-	return regmap_update_bits(mfd->regmap, BD71837_REG_BUCK1_CTRL + id,
-				  BUCK_RAMPRATE_MASK, ramp_value << 6);
-}
-
-/* Bucks 1 to 4 support DVS. PWM mode is used when voltage is changed.
- * Bucks 5 to 8 and LDOs can use PFM and must be disabled when voltage
- * is changed. Hence we return -EBUSY for these if voltage is changed
- * when BUCK/LDO is enabled.
- */
-static int bd71837_set_voltage_sel_restricted(struct regulator_dev *rdev,
-						    unsigned int sel)
-{
-	if (regulator_is_enabled_regmap(rdev))
-		return -EBUSY;
-
-	return regulator_set_voltage_sel_regmap(rdev, sel);
-}
-
-static struct regulator_ops bd71837_ldo_regulator_ops = {
-	.enable = regulator_enable_regmap,
-	.disable = regulator_disable_regmap,
-	.is_enabled = regulator_is_enabled_regmap,
-	.list_voltage = regulator_list_voltage_linear_range,
-	.set_voltage_sel = bd71837_set_voltage_sel_restricted,
-	.get_voltage_sel = regulator_get_voltage_sel_regmap,
-};
-
-static struct regulator_ops bd71837_ldo_regulator_nolinear_ops = {
-	.enable = regulator_enable_regmap,
-	.disable = regulator_disable_regmap,
-	.is_enabled = regulator_is_enabled_regmap,
-	.list_voltage = regulator_list_voltage_table,
-	.set_voltage_sel = bd71837_set_voltage_sel_restricted,
-	.get_voltage_sel = regulator_get_voltage_sel_regmap,
-};
-
-static struct regulator_ops bd71837_buck_regulator_ops = {
-	.enable = regulator_enable_regmap,
-	.disable = regulator_disable_regmap,
-	.is_enabled = regulator_is_enabled_regmap,
-	.list_voltage = regulator_list_voltage_linear_range,
-	.set_voltage_sel = bd71837_set_voltage_sel_restricted,
-	.get_voltage_sel = regulator_get_voltage_sel_regmap,
-	.set_voltage_time_sel = regulator_set_voltage_time_sel,
-};
-
-static struct regulator_ops bd71837_buck_regulator_nolinear_ops = {
-	.enable = regulator_enable_regmap,
-	.disable = regulator_disable_regmap,
-	.is_enabled = regulator_is_enabled_regmap,
-	.list_voltage = regulator_list_voltage_table,
-	.set_voltage_sel = bd71837_set_voltage_sel_restricted,
-	.get_voltage_sel = regulator_get_voltage_sel_regmap,
-	.set_voltage_time_sel = regulator_set_voltage_time_sel,
-};
-
-static struct regulator_ops bd71837_buck1234_regulator_ops = {
-	.enable = regulator_enable_regmap,
-	.disable = regulator_disable_regmap,
-	.is_enabled = regulator_is_enabled_regmap,
-	.list_voltage = regulator_list_voltage_linear_range,
-	.set_voltage_sel = regulator_set_voltage_sel_regmap,
-	.get_voltage_sel = regulator_get_voltage_sel_regmap,
-	.set_voltage_time_sel = regulator_set_voltage_time_sel,
-	.set_ramp_delay = bd71837_buck1234_set_ramp_delay,
-};
-
-/*
- * BUCK1/2/3/4
- * 0.70 to 1.30V (10mV step)
- */
-static const struct regulator_linear_range bd71837_buck1234_voltage_ranges[] = {
-	REGULATOR_LINEAR_RANGE(700000, 0x00, 0x3C, 10000),
-	REGULATOR_LINEAR_RANGE(1300000, 0x3D, 0x3F, 0),
-};
-
-/*
- * BUCK5
- * 0.9V to 1.35V ()
- */
-static const struct regulator_linear_range bd71837_buck5_voltage_ranges[] = {
-	REGULATOR_LINEAR_RANGE(700000, 0x00, 0x03, 100000),
-	REGULATOR_LINEAR_RANGE(1050000, 0x04, 0x05, 50000),
-	REGULATOR_LINEAR_RANGE(1200000, 0x06, 0x07, 150000),
-};
-
-/*
- * BUCK6
- * 3.0V to 3.3V (step 100mV)
- */
-static const struct regulator_linear_range bd71837_buck6_voltage_ranges[] = {
-	REGULATOR_LINEAR_RANGE(3000000, 0x00, 0x03, 100000),
-};
-
-/*
- * BUCK7
- * 000 = 1.605V
- * 001 = 1.695V
- * 010 = 1.755V
- * 011 = 1.8V (Initial)
- * 100 = 1.845V
- * 101 = 1.905V
- * 110 = 1.95V
- * 111 = 1.995V
- */
-static const unsigned int buck_7_volts[] = {
-	1605000, 1695000, 1755000, 1800000, 1845000, 1905000, 1950000, 1995000
-};
-
-/*
- * BUCK8
- * 0.8V to 1.40V (step 10mV)
- */
-static const struct regulator_linear_range bd71837_buck8_voltage_ranges[] = {
-	REGULATOR_LINEAR_RANGE(800000, 0x00, 0x3C, 10000),
-	REGULATOR_LINEAR_RANGE(1400000, 0x3D, 0x3F, 0),
-};
-
-/*
- * LDO1
- * 3.0 to 3.3V (100mV step)
- */
-static const struct regulator_linear_range bd71837_ldo1_voltage_ranges[] = {
-	REGULATOR_LINEAR_RANGE(3000000, 0x00, 0x03, 100000),
-};
-
-/*
- * LDO2
- * 0.8 or 0.9V
- */
-static const unsigned int ldo_2_volts[] = {
-	900000, 800000
-};
-
-/*
- * LDO3
- * 1.8 to 3.3V (100mV step)
- */
-static const struct regulator_linear_range bd71837_ldo3_voltage_ranges[] = {
-	REGULATOR_LINEAR_RANGE(1800000, 0x00, 0x0F, 100000),
-};
-
-/*
- * LDO4
- * 0.9 to 1.8V (100mV step)
- */
-static const struct regulator_linear_range bd71837_ldo4_voltage_ranges[] = {
-	REGULATOR_LINEAR_RANGE(900000, 0x00, 0x09, 100000),
-	REGULATOR_LINEAR_RANGE(1800000, 0x0A, 0x0F, 0),
-};
-
-/*
- * LDO5
- * 1.8 to 3.3V (100mV step)
- */
-static const struct regulator_linear_range bd71837_ldo5_voltage_ranges[] = {
-	REGULATOR_LINEAR_RANGE(1800000, 0x00, 0x0F, 100000),
-};
-
-/*
- * LDO6
- * 0.9 to 1.8V (100mV step)
- */
-static const struct regulator_linear_range bd71837_ldo6_voltage_ranges[] = {
-	REGULATOR_LINEAR_RANGE(900000, 0x00, 0x09, 100000),
-	REGULATOR_LINEAR_RANGE(1800000, 0x0A, 0x0F, 0),
-};
-
-/*
- * LDO7
- * 1.8 to 3.3V (100mV step)
- */
-static const struct regulator_linear_range bd71837_ldo7_voltage_ranges[] = {
-	REGULATOR_LINEAR_RANGE(1800000, 0x00, 0x0F, 100000),
-};
-
-static const struct regulator_desc bd71837_regulators[] = {
-	{
-		.name = "buck1",
-		.of_match = of_match_ptr("BUCK1"),
-		.regulators_node = of_match_ptr("regulators"),
-		.id = BD71837_BUCK1,
-		.ops = &bd71837_buck1234_regulator_ops,
-		.type = REGULATOR_VOLTAGE,
-		.n_voltages = BD71837_BUCK1_VOLTAGE_NUM,
-		.linear_ranges = bd71837_buck1234_voltage_ranges,
-		.n_linear_ranges = ARRAY_SIZE(bd71837_buck1234_voltage_ranges),
-		.vsel_reg = BD71837_REG_BUCK1_VOLT_RUN,
-		.vsel_mask = BUCK1_RUN_MASK,
-		.enable_reg = BD71837_REG_BUCK1_CTRL,
-		.enable_mask = BD71837_BUCK_EN,
-		.owner = THIS_MODULE,
-	},
-	{
-		.name = "buck2",
-		.of_match = of_match_ptr("BUCK2"),
-		.regulators_node = of_match_ptr("regulators"),
-		.id = BD71837_BUCK2,
-		.ops = &bd71837_buck1234_regulator_ops,
-		.type = REGULATOR_VOLTAGE,
-		.n_voltages = BD71837_BUCK2_VOLTAGE_NUM,
-		.linear_ranges = bd71837_buck1234_voltage_ranges,
-		.n_linear_ranges = ARRAY_SIZE(bd71837_buck1234_voltage_ranges),
-		.vsel_reg = BD71837_REG_BUCK2_VOLT_RUN,
-		.vsel_mask = BUCK2_RUN_MASK,
-		.enable_reg = BD71837_REG_BUCK2_CTRL,
-		.enable_mask = BD71837_BUCK_EN,
-		.owner = THIS_MODULE,
-	},
-	{
-		.name = "buck3",
-		.of_match = of_match_ptr("BUCK3"),
-		.regulators_node = of_match_ptr("regulators"),
-		.id = BD71837_BUCK3,
-		.ops = &bd71837_buck1234_regulator_ops,
-		.type = REGULATOR_VOLTAGE,
-		.n_voltages = BD71837_BUCK3_VOLTAGE_NUM,
-		.linear_ranges = bd71837_buck1234_voltage_ranges,
-		.n_linear_ranges = ARRAY_SIZE(bd71837_buck1234_voltage_ranges),
-		.vsel_reg = BD71837_REG_BUCK3_VOLT_RUN,
-		.vsel_mask = BUCK3_RUN_MASK,
-		.enable_reg = BD71837_REG_BUCK3_CTRL,
-		.enable_mask = BD71837_BUCK_EN,
-		.owner = THIS_MODULE,
-	},
-	{
-		.name = "buck4",
-		.of_match = of_match_ptr("BUCK4"),
-		.regulators_node = of_match_ptr("regulators"),
-			.id = BD71837_BUCK4,
-		.ops = &bd71837_buck1234_regulator_ops,
-		.type = REGULATOR_VOLTAGE,
-		.n_voltages = BD71837_BUCK4_VOLTAGE_NUM,
-		.linear_ranges = bd71837_buck1234_voltage_ranges,
-		.n_linear_ranges = ARRAY_SIZE(bd71837_buck1234_voltage_ranges),
-		.vsel_reg = BD71837_REG_BUCK4_VOLT_RUN,
-		.vsel_mask = BUCK4_RUN_MASK,
-		.enable_reg = BD71837_REG_BUCK4_CTRL,
-		.enable_mask = BD71837_BUCK_EN,
-		.owner = THIS_MODULE,
-	},
-	{
-		.name = "buck5",
-		.of_match = of_match_ptr("BUCK5"),
-		.regulators_node = of_match_ptr("regulators"),
-		.id = BD71837_BUCK5,
-		.ops = &bd71837_buck_regulator_ops,
-		.type = REGULATOR_VOLTAGE,
-		.n_voltages = BD71837_BUCK5_VOLTAGE_NUM,
-		.linear_ranges = bd71837_buck5_voltage_ranges,
-		.n_linear_ranges = ARRAY_SIZE(bd71837_buck5_voltage_ranges),
-		.vsel_reg = BD71837_REG_BUCK5_VOLT,
-		.vsel_mask = BUCK5_MASK,
-		.enable_reg = BD71837_REG_BUCK5_CTRL,
-		.enable_mask = BD71837_BUCK_EN,
-		.owner = THIS_MODULE,
-	},
-	{
-		.name = "buck6",
-		.of_match = of_match_ptr("BUCK6"),
-		.regulators_node = of_match_ptr("regulators"),
-		.id = BD71837_BUCK6,
-		.ops = &bd71837_buck_regulator_ops,
-		.type = REGULATOR_VOLTAGE,
-		.n_voltages = BD71837_BUCK6_VOLTAGE_NUM,
-		.linear_ranges = bd71837_buck6_voltage_ranges,
-		.n_linear_ranges = ARRAY_SIZE(bd71837_buck6_voltage_ranges),
-		.vsel_reg = BD71837_REG_BUCK6_VOLT,
-		.vsel_mask = BUCK6_MASK,
-		.enable_reg = BD71837_REG_BUCK6_CTRL,
-		.enable_mask = BD71837_BUCK_EN,
-		.owner = THIS_MODULE,
-	},
-	{
-		.name = "buck7",
-		.of_match = of_match_ptr("BUCK7"),
-		.regulators_node = of_match_ptr("regulators"),
-		.id = BD71837_BUCK7,
-		.ops = &bd71837_buck_regulator_nolinear_ops,
-		.type = REGULATOR_VOLTAGE,
-		.volt_table = &buck_7_volts[0],
-		.n_voltages = ARRAY_SIZE(buck_7_volts),
-		.vsel_reg = BD71837_REG_BUCK7_VOLT,
-		.vsel_mask = BUCK7_MASK,
-		.enable_reg = BD71837_REG_BUCK7_CTRL,
-		.enable_mask = BD71837_BUCK_EN,
-		.owner = THIS_MODULE,
-	},
-	{
-		.name = "buck8",
-		.of_match = of_match_ptr("BUCK8"),
-		.regulators_node = of_match_ptr("regulators"),
-		.id = BD71837_BUCK8,
-		.ops = &bd71837_buck_regulator_ops,
-		.type = REGULATOR_VOLTAGE,
-		.n_voltages = BD71837_BUCK8_VOLTAGE_NUM,
-		.linear_ranges = bd71837_buck8_voltage_ranges,
-		.n_linear_ranges = ARRAY_SIZE(bd71837_buck8_voltage_ranges),
-		.vsel_reg = BD71837_REG_BUCK8_VOLT,
-		.vsel_mask = BUCK8_MASK,
-		.enable_reg = BD71837_REG_BUCK8_CTRL,
-		.enable_mask = BD71837_BUCK_EN,
-		.owner = THIS_MODULE,
-	},
-	{
-		.name = "ldo1",
-		.of_match = of_match_ptr("LDO1"),
-		.regulators_node = of_match_ptr("regulators"),
-		.id = BD71837_LDO1,
-		.ops = &bd71837_ldo_regulator_ops,
-		.type = REGULATOR_VOLTAGE,
-		.n_voltages = BD71837_LDO1_VOLTAGE_NUM,
-		.linear_ranges = bd71837_ldo1_voltage_ranges,
-		.n_linear_ranges = ARRAY_SIZE(bd71837_ldo1_voltage_ranges),
-		.vsel_reg = BD71837_REG_LDO1_VOLT,
-		.vsel_mask = LDO1_MASK,
-		.enable_reg = BD71837_REG_LDO1_VOLT,
-		.enable_mask = BD71837_LDO_EN,
-		.owner = THIS_MODULE,
-	},
-	{
-		.name = "ldo2",
-		.of_match = of_match_ptr("LDO2"),
-		.regulators_node = of_match_ptr("regulators"),
-		.id = BD71837_LDO2,
-		.ops = &bd71837_ldo_regulator_nolinear_ops,
-		.type = REGULATOR_VOLTAGE,
-		.volt_table = &ldo_2_volts[0],
-		.vsel_reg = BD71837_REG_LDO2_VOLT,
-		.vsel_mask = LDO2_MASK,
-		.n_voltages = ARRAY_SIZE(ldo_2_volts),
-		.n_voltages = BD71837_LDO2_VOLTAGE_NUM,
-		.enable_reg = BD71837_REG_LDO2_VOLT,
-		.enable_mask = BD71837_LDO_EN,
-		.owner = THIS_MODULE,
-	},
-	{
-		.name = "ldo3",
-		.of_match = of_match_ptr("LDO3"),
-		.regulators_node = of_match_ptr("regulators"),
-		.id = BD71837_LDO3,
-		.ops = &bd71837_ldo_regulator_ops,
-		.type = REGULATOR_VOLTAGE,
-		.n_voltages = BD71837_LDO3_VOLTAGE_NUM,
-		.linear_ranges = bd71837_ldo3_voltage_ranges,
-		.n_linear_ranges = ARRAY_SIZE(bd71837_ldo3_voltage_ranges),
-		.vsel_reg = BD71837_REG_LDO3_VOLT,
-		.vsel_mask = LDO3_MASK,
-		.enable_reg = BD71837_REG_LDO3_VOLT,
-		.enable_mask = BD71837_LDO_EN,
-		.owner = THIS_MODULE,
-	},
-	{
-		.name = "ldo4",
-		.of_match = of_match_ptr("LDO4"),
-		.regulators_node = of_match_ptr("regulators"),
-		.id = BD71837_LDO4,
-		.ops = &bd71837_ldo_regulator_ops,
-		.type = REGULATOR_VOLTAGE,
-		.n_voltages = BD71837_LDO4_VOLTAGE_NUM,
-		.linear_ranges = bd71837_ldo4_voltage_ranges,
-		.n_linear_ranges = ARRAY_SIZE(bd71837_ldo4_voltage_ranges),
-		.vsel_reg = BD71837_REG_LDO4_VOLT,
-		.vsel_mask = LDO4_MASK,
-		.enable_reg = BD71837_REG_LDO4_VOLT,
-		.enable_mask = BD71837_LDO_EN,
-		.owner = THIS_MODULE,
-	},
-	{
-		.name = "ldo5",
-		.of_match = of_match_ptr("LDO5"),
-		.regulators_node = of_match_ptr("regulators"),
-		.id = BD71837_LDO5,
-		.ops = &bd71837_ldo_regulator_ops,
-		.type = REGULATOR_VOLTAGE,
-		.n_voltages = BD71837_LDO5_VOLTAGE_NUM,
-		.linear_ranges = bd71837_ldo5_voltage_ranges,
-		.n_linear_ranges = ARRAY_SIZE(bd71837_ldo5_voltage_ranges),
-		/* LDO5 is supplied by buck6 */
-		.supply_name = "buck6",
-		.vsel_reg = BD71837_REG_LDO5_VOLT,
-		.vsel_mask = LDO5_MASK,
-		.enable_reg = BD71837_REG_LDO5_VOLT,
-		.enable_mask = BD71837_LDO_EN,
-		.owner = THIS_MODULE,
-	},
-	{
-		.name = "ldo6",
-		.of_match = of_match_ptr("LDO6"),
-		.regulators_node = of_match_ptr("regulators"),
-		.id = BD71837_LDO6,
-		.ops = &bd71837_ldo_regulator_ops,
-		.type = REGULATOR_VOLTAGE,
-		.n_voltages = BD71837_LDO6_VOLTAGE_NUM,
-		.linear_ranges = bd71837_ldo6_voltage_ranges,
-		.n_linear_ranges = ARRAY_SIZE(bd71837_ldo6_voltage_ranges),
-		/* LDO6 is supplied by buck7 */
-		.supply_name = "buck7",
-		.vsel_reg = BD71837_REG_LDO6_VOLT,
-		.vsel_mask = LDO6_MASK,
-		.enable_reg = BD71837_REG_LDO6_VOLT,
-		.enable_mask = BD71837_LDO_EN,
-		.owner = THIS_MODULE,
-	},
-	{
-		.name = "ldo7",
-		.of_match = of_match_ptr("LDO7"),
-		.regulators_node = of_match_ptr("regulators"),
-		.id = BD71837_LDO7,
-		.ops = &bd71837_ldo_regulator_ops,
-		.type = REGULATOR_VOLTAGE,
-		.n_voltages = BD71837_LDO7_VOLTAGE_NUM,
-		.linear_ranges = bd71837_ldo7_voltage_ranges,
-		.n_linear_ranges = ARRAY_SIZE(bd71837_ldo7_voltage_ranges),
-		.vsel_reg = BD71837_REG_LDO7_VOLT,
-		.vsel_mask = LDO7_MASK,
-		.enable_reg = BD71837_REG_LDO7_VOLT,
-		.enable_mask = BD71837_LDO_EN,
-		.owner = THIS_MODULE,
-	},
-};
-
-struct reg_init {
-	unsigned int reg;
-	unsigned int mask;
-};
-
-static int bd71837_probe(struct platform_device *pdev)
-{
-	struct bd71837_pmic *pmic;
-	struct regulator_config config = { 0 };
-	struct reg_init pmic_regulator_inits[] = {
-		{
-			.reg = BD71837_REG_BUCK1_CTRL,
-			.mask = BD71837_BUCK_SEL,
-		}, {
-			.reg = BD71837_REG_BUCK2_CTRL,
-			.mask = BD71837_BUCK_SEL,
-		}, {
-			.reg = BD71837_REG_BUCK3_CTRL,
-			.mask = BD71837_BUCK_SEL,
-		}, {
-			.reg = BD71837_REG_BUCK4_CTRL,
-			.mask = BD71837_BUCK_SEL,
-		}, {
-			.reg = BD71837_REG_BUCK5_CTRL,
-			.mask = BD71837_BUCK_SEL,
-		}, {
-			.reg = BD71837_REG_BUCK6_CTRL,
-			.mask = BD71837_BUCK_SEL,
-		}, {
-			.reg = BD71837_REG_BUCK7_CTRL,
-			.mask = BD71837_BUCK_SEL,
-		}, {
-			.reg = BD71837_REG_BUCK8_CTRL,
-			.mask = BD71837_BUCK_SEL,
-		}, {
-			.reg = BD71837_REG_LDO1_VOLT,
-			.mask = BD71837_LDO_SEL,
-		}, {
-			.reg = BD71837_REG_LDO2_VOLT,
-			.mask = BD71837_LDO_SEL,
-		}, {
-			.reg = BD71837_REG_LDO3_VOLT,
-			.mask = BD71837_LDO_SEL,
-		}, {
-			.reg = BD71837_REG_LDO4_VOLT,
-			.mask = BD71837_LDO_SEL,
-		}, {
-			.reg = BD71837_REG_LDO5_VOLT,
-			.mask = BD71837_LDO_SEL,
-		}, {
-			.reg = BD71837_REG_LDO6_VOLT,
-			.mask = BD71837_LDO_SEL,
-		}, {
-			.reg = BD71837_REG_LDO7_VOLT,
-			.mask = BD71837_LDO_SEL,
-		}
-	};
-
-	int i, err;
-
-	pmic = devm_kzalloc(&pdev->dev, sizeof(*pmic), GFP_KERNEL);
-	if (!pmic)
-		return -ENOMEM;
-
-	memcpy(pmic->descs, bd71837_regulators, sizeof(pmic->descs));
-
-	pmic->pdev = pdev;
-	pmic->mfd = dev_get_drvdata(pdev->dev.parent);
-
-	if (!pmic->mfd) {
-		dev_err(&pdev->dev, "No MFD driver data\n");
-		err = -EINVAL;
-		goto err;
-	}
-	platform_set_drvdata(pdev, pmic);
-
-	/* Register LOCK release */
-	err = regmap_update_bits(pmic->mfd->regmap, BD71837_REG_REGLOCK,
-				 (REGLOCK_PWRSEQ | REGLOCK_VREG), 0);
-	if (err) {
-		dev_err(&pmic->pdev->dev, "Failed to unlock PMIC (%d)\n", err);
-		goto err;
-	} else {
-		dev_dbg(&pmic->pdev->dev, "Unlocked lock register 0x%x\n",
-			BD71837_REG_REGLOCK);
-	}
-
-	/*
-	 * There is a HW quirk in BD71837. The shutdown sequence timings for
-	 * bucks/LDOs which are controlled via register interface are changed.
-	 * At PMIC poweroff the voltage for BUCK6/7 is cut immediately at the
-	 * beginning of shut-down sequence. As bucks 6 and 7 are parent
-	 * supplies for LDO5 and LDO6 - this causes LDO5/6 voltage
-	 * monitoring to errorneously detect under voltage and force PMIC to
-	 * emergency state instead of poweroff. In order to avoid this we
-	 * disable voltage monitoring for LDO5 and LDO6
-	 */
-	err = regmap_update_bits(pmic->mfd->regmap, BD718XX_REG_MVRFLTMASK2,
-				 BD718XX_LDO5_VRMON80 | BD718XX_LDO6_VRMON80,
-				 BD718XX_LDO5_VRMON80 | BD718XX_LDO6_VRMON80);
-	if (err) {
-		dev_err(&pmic->pdev->dev,
-			"Failed to disable voltage monitoring\n");
-		goto err;
-	}
-
-	for (i = 0; i < ARRAY_SIZE(pmic_regulator_inits); i++) {
-
-		struct regulator_desc *desc;
-		struct regulator_dev *rdev;
-
-		desc = &pmic->descs[i];
-
-		config.dev = pdev->dev.parent;
-		config.driver_data = pmic;
-		config.regmap = pmic->mfd->regmap;
-
-		rdev = devm_regulator_register(&pdev->dev, desc, &config);
-		if (IS_ERR(rdev)) {
-			dev_err(pmic->mfd->dev,
-				"failed to register %s regulator\n",
-				desc->name);
-			err = PTR_ERR(rdev);
-			goto err;
-		}
-		/* Regulator register gets the regulator constraints and
-		 * applies them (set_machine_constraints). This should have
-		 * turned the control register(s) to correct values and we
-		 * can now switch the control from PMIC state machine to the
-		 * register interface
-		 */
-		err = regmap_update_bits(pmic->mfd->regmap,
-					 pmic_regulator_inits[i].reg,
-					 pmic_regulator_inits[i].mask,
-					 0xFFFFFFFF);
-		if (err) {
-			dev_err(&pmic->pdev->dev,
-				"Failed to write BUCK/LDO SEL bit for (%s)\n",
-				desc->name);
-			goto err;
-		}
-
-		pmic->rdev[i] = rdev;
-	}
-
-err:
-	return err;
-}
-
-static struct platform_driver bd71837_regulator = {
-	.driver = {
-		.name = "bd71837-pmic",
-	},
-	.probe = bd71837_probe,
-};
-
-module_platform_driver(bd71837_regulator);
-
-MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>");
-MODULE_DESCRIPTION("BD71837 voltage regulator driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/regulator/bd718x7-regulator.c b/drivers/regulator/bd718x7-regulator.c
new file mode 100644
index 000000000000..3a47e0372e77
--- /dev/null
+++ b/drivers/regulator/bd718x7-regulator.c
@@ -0,0 +1,1119 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) 2018 ROHM Semiconductors
+// bd71837-regulator.c ROHM BD71837MWV/BD71847MWV regulator driver
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mfd/rohm-bd718x7.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/slab.h>
+
+/*
+ * BUCK1/2/3/4
+ * BUCK1RAMPRATE[1:0] BUCK1 DVS ramp rate setting
+ * 00: 10.00mV/usec 10mV 1uS
+ * 01: 5.00mV/usec	10mV 2uS
+ * 10: 2.50mV/usec	10mV 4uS
+ * 11: 1.25mV/usec	10mV 8uS
+ */
+static int bd718xx_buck1234_set_ramp_delay(struct regulator_dev *rdev,
+					   int ramp_delay)
+{
+	int id = rdev->desc->id;
+	unsigned int ramp_value = BUCK_RAMPRATE_10P00MV;
+
+	dev_dbg(&rdev->dev, "Buck[%d] Set Ramp = %d\n", id + 1,
+		ramp_delay);
+	switch (ramp_delay) {
+	case 1 ... 1250:
+		ramp_value = BUCK_RAMPRATE_1P25MV;
+		break;
+	case 1251 ... 2500:
+		ramp_value = BUCK_RAMPRATE_2P50MV;
+		break;
+	case 2501 ... 5000:
+		ramp_value = BUCK_RAMPRATE_5P00MV;
+		break;
+	case 5001 ... 10000:
+		ramp_value = BUCK_RAMPRATE_10P00MV;
+		break;
+	default:
+		ramp_value = BUCK_RAMPRATE_10P00MV;
+		dev_err(&rdev->dev,
+			"%s: ramp_delay: %d not supported, setting 10000mV//us\n",
+			rdev->desc->name, ramp_delay);
+	}
+
+	return regmap_update_bits(rdev->regmap, BD718XX_REG_BUCK1_CTRL + id,
+				  BUCK_RAMPRATE_MASK, ramp_value << 6);
+}
+
+/* Bucks 1 to 4 support DVS. PWM mode is used when voltage is changed.
+ * Bucks 5 to 8 and LDOs can use PFM and must be disabled when voltage
+ * is changed. Hence we return -EBUSY for these if voltage is changed
+ * when BUCK/LDO is enabled.
+ */
+static int bd718xx_set_voltage_sel_restricted(struct regulator_dev *rdev,
+						    unsigned int sel)
+{
+	if (regulator_is_enabled_regmap(rdev))
+		return -EBUSY;
+
+	return regulator_set_voltage_sel_regmap(rdev, sel);
+}
+
+static int bd718xx_set_voltage_sel_pickable_restricted(
+		struct regulator_dev *rdev, unsigned int sel)
+{
+	if (regulator_is_enabled_regmap(rdev))
+		return -EBUSY;
+
+	return regulator_set_voltage_sel_pickable_regmap(rdev, sel);
+}
+
+static struct regulator_ops bd718xx_pickable_range_ldo_ops = {
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.list_voltage = regulator_list_voltage_pickable_linear_range,
+	.set_voltage_sel = bd718xx_set_voltage_sel_pickable_restricted,
+	.get_voltage_sel = regulator_get_voltage_sel_pickable_regmap,
+};
+
+static struct regulator_ops bd718xx_pickable_range_buck_ops = {
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.list_voltage = regulator_list_voltage_pickable_linear_range,
+	.set_voltage_sel = bd718xx_set_voltage_sel_pickable_restricted,
+	.get_voltage_sel = regulator_get_voltage_sel_pickable_regmap,
+	.set_voltage_time_sel = regulator_set_voltage_time_sel,
+};
+
+static struct regulator_ops bd718xx_ldo_regulator_ops = {
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.list_voltage = regulator_list_voltage_linear_range,
+	.set_voltage_sel = bd718xx_set_voltage_sel_restricted,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+};
+
+static struct regulator_ops bd718xx_ldo_regulator_nolinear_ops = {
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.list_voltage = regulator_list_voltage_table,
+	.set_voltage_sel = bd718xx_set_voltage_sel_restricted,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+};
+
+static struct regulator_ops bd718xx_buck_regulator_ops = {
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.list_voltage = regulator_list_voltage_linear_range,
+	.set_voltage_sel = bd718xx_set_voltage_sel_restricted,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_time_sel = regulator_set_voltage_time_sel,
+};
+
+static struct regulator_ops bd718xx_buck_regulator_nolinear_ops = {
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.list_voltage = regulator_list_voltage_table,
+	.set_voltage_sel = bd718xx_set_voltage_sel_restricted,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_time_sel = regulator_set_voltage_time_sel,
+};
+
+static struct regulator_ops bd718xx_dvs_buck_regulator_ops = {
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.list_voltage = regulator_list_voltage_linear_range,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_time_sel = regulator_set_voltage_time_sel,
+	.set_ramp_delay = bd718xx_buck1234_set_ramp_delay,
+};
+
+/*
+ * BD71837 BUCK1/2/3/4
+ * BD71847 BUCK1/2
+ * 0.70 to 1.30V (10mV step)
+ */
+static const struct regulator_linear_range bd718xx_dvs_buck_volts[] = {
+	REGULATOR_LINEAR_RANGE(700000, 0x00, 0x3C, 10000),
+	REGULATOR_LINEAR_RANGE(1300000, 0x3D, 0x3F, 0),
+};
+
+/*
+ * BD71837 BUCK5
+ * 0.7V to 1.35V  (range 0)
+ * and
+ * 0.675 to 1.325 (range 1)
+ */
+static const struct regulator_linear_range bd71837_buck5_volts[] = {
+	/* Ranges when VOLT_SEL bit is 0 */
+	REGULATOR_LINEAR_RANGE(700000, 0x00, 0x03, 100000),
+	REGULATOR_LINEAR_RANGE(1050000, 0x04, 0x05, 50000),
+	REGULATOR_LINEAR_RANGE(1200000, 0x06, 0x07, 150000),
+	/* Ranges when VOLT_SEL bit is 1  */
+	REGULATOR_LINEAR_RANGE(675000, 0x0, 0x3, 100000),
+	REGULATOR_LINEAR_RANGE(1025000, 0x4, 0x5, 50000),
+	REGULATOR_LINEAR_RANGE(1175000, 0x6, 0x7, 150000),
+};
+
+/*
+ * Range selector for first 3 linear ranges is 0x0
+ * and 0x1 for last 3 ranges.
+ */
+static const unsigned int bd71837_buck5_volt_range_sel[] = {
+	0x0, 0x0, 0x0, 0x80, 0x80, 0x80
+};
+
+/*
+ * BD71847 BUCK3
+ */
+static const struct regulator_linear_range bd71847_buck3_volts[] = {
+	/* Ranges when VOLT_SEL bits are 00 */
+	REGULATOR_LINEAR_RANGE(700000, 0x00, 0x03, 100000),
+	REGULATOR_LINEAR_RANGE(1050000, 0x04, 0x05, 50000),
+	REGULATOR_LINEAR_RANGE(1200000, 0x06, 0x07, 150000),
+	/* Ranges when VOLT_SEL bits are 01 */
+	REGULATOR_LINEAR_RANGE(550000, 0x0, 0x7, 50000),
+	/* Ranges when VOLT_SEL bits are 11 */
+	REGULATOR_LINEAR_RANGE(675000, 0x0, 0x3, 100000),
+	REGULATOR_LINEAR_RANGE(1025000, 0x4, 0x5, 50000),
+	REGULATOR_LINEAR_RANGE(1175000, 0x6, 0x7, 150000),
+};
+
+static const unsigned int bd71847_buck3_volt_range_sel[] = {
+	0x0, 0x0, 0x0, 0x40, 0x80, 0x80, 0x80
+};
+
+static const struct regulator_linear_range bd71847_buck4_volts[] = {
+	REGULATOR_LINEAR_RANGE(3000000, 0x00, 0x03, 100000),
+	REGULATOR_LINEAR_RANGE(2600000, 0x00, 0x03, 100000),
+};
+
+static const unsigned int bd71847_buck4_volt_range_sel[] = { 0x0, 0x40 };
+
+/*
+ * BUCK6
+ * 3.0V to 3.3V (step 100mV)
+ */
+static const struct regulator_linear_range bd71837_buck6_volts[] = {
+	REGULATOR_LINEAR_RANGE(3000000, 0x00, 0x03, 100000),
+};
+
+/*
+ * BD71837 BUCK7
+ * BD71847 BUCK5
+ * 000 = 1.605V
+ * 001 = 1.695V
+ * 010 = 1.755V
+ * 011 = 1.8V (Initial)
+ * 100 = 1.845V
+ * 101 = 1.905V
+ * 110 = 1.95V
+ * 111 = 1.995V
+ */
+static const unsigned int bd718xx_3rd_nodvs_buck_volts[] = {
+	1605000, 1695000, 1755000, 1800000, 1845000, 1905000, 1950000, 1995000
+};
+
+/*
+ * BUCK8
+ * 0.8V to 1.40V (step 10mV)
+ */
+static const struct regulator_linear_range bd718xx_4th_nodvs_buck_volts[] = {
+	REGULATOR_LINEAR_RANGE(800000, 0x00, 0x3C, 10000),
+};
+
+/*
+ * LDO1
+ * 3.0 to 3.3V (100mV step)
+ */
+static const struct regulator_linear_range bd718xx_ldo1_volts[] = {
+	REGULATOR_LINEAR_RANGE(3000000, 0x00, 0x03, 100000),
+	REGULATOR_LINEAR_RANGE(1600000, 0x00, 0x03, 100000),
+};
+
+static const unsigned int bd718xx_ldo1_volt_range_sel[] = { 0x0, 0x20 };
+
+/*
+ * LDO2
+ * 0.8 or 0.9V
+ */
+static const unsigned int ldo_2_volts[] = {
+	900000, 800000
+};
+
+/*
+ * LDO3
+ * 1.8 to 3.3V (100mV step)
+ */
+static const struct regulator_linear_range bd718xx_ldo3_volts[] = {
+	REGULATOR_LINEAR_RANGE(1800000, 0x00, 0x0F, 100000),
+};
+
+/*
+ * LDO4
+ * 0.9 to 1.8V (100mV step)
+ */
+static const struct regulator_linear_range bd718xx_ldo4_volts[] = {
+	REGULATOR_LINEAR_RANGE(900000, 0x00, 0x09, 100000),
+};
+
+/*
+ * LDO5 for BD71837
+ * 1.8 to 3.3V (100mV step)
+ */
+static const struct regulator_linear_range bd71837_ldo5_volts[] = {
+	REGULATOR_LINEAR_RANGE(1800000, 0x00, 0x0F, 100000),
+};
+
+/*
+ * LDO5 for BD71837
+ * 1.8 to 3.3V (100mV step)
+ */
+static const struct regulator_linear_range bd71847_ldo5_volts[] = {
+	REGULATOR_LINEAR_RANGE(1800000, 0x00, 0x0F, 100000),
+	REGULATOR_LINEAR_RANGE(800000, 0x00, 0x0F, 100000),
+};
+
+static const unsigned int bd71847_ldo5_volt_range_sel[] = { 0x0, 0x20 };
+
+/*
+ * LDO6
+ * 0.9 to 1.8V (100mV step)
+ */
+static const struct regulator_linear_range bd718xx_ldo6_volts[] = {
+	REGULATOR_LINEAR_RANGE(900000, 0x00, 0x09, 100000),
+};
+
+/*
+ * LDO7
+ * 1.8 to 3.3V (100mV step)
+ */
+static const struct regulator_linear_range bd71837_ldo7_volts[] = {
+	REGULATOR_LINEAR_RANGE(1800000, 0x00, 0x0F, 100000),
+};
+
+struct reg_init {
+	unsigned int reg;
+	unsigned int mask;
+	unsigned int val;
+};
+struct bd718xx_regulator_data {
+	struct regulator_desc desc;
+	const struct reg_init init;
+	const struct reg_init *additional_inits;
+	int additional_init_amnt;
+};
+
+/*
+ * There is a HW quirk in BD71837. The shutdown sequence timings for
+ * bucks/LDOs which are controlled via register interface are changed.
+ * At PMIC poweroff the voltage for BUCK6/7 is cut immediately at the
+ * beginning of shut-down sequence. As bucks 6 and 7 are parent
+ * supplies for LDO5 and LDO6 - this causes LDO5/6 voltage
+ * monitoring to errorneously detect under voltage and force PMIC to
+ * emergency state instead of poweroff. In order to avoid this we
+ * disable voltage monitoring for LDO5 and LDO6
+ */
+static const struct reg_init bd71837_ldo5_inits[] = {
+	{
+		.reg = BD718XX_REG_MVRFLTMASK2,
+		.mask = BD718XX_LDO5_VRMON80,
+		.val = BD718XX_LDO5_VRMON80,
+	},
+};
+
+static const struct reg_init bd71837_ldo6_inits[] = {
+	{
+		.reg = BD718XX_REG_MVRFLTMASK2,
+		.mask = BD718XX_LDO6_VRMON80,
+		.val = BD718XX_LDO6_VRMON80,
+	},
+};
+
+static const struct bd718xx_regulator_data bd71847_regulators[] = {
+	{
+		.desc = {
+			.name = "buck1",
+			.of_match = of_match_ptr("BUCK1"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = BD718XX_BUCK1,
+			.ops = &bd718xx_dvs_buck_regulator_ops,
+			.type = REGULATOR_VOLTAGE,
+			.n_voltages = BD718XX_DVS_BUCK_VOLTAGE_NUM,
+			.linear_ranges = bd718xx_dvs_buck_volts,
+			.n_linear_ranges =
+				ARRAY_SIZE(bd718xx_dvs_buck_volts),
+			.vsel_reg = BD718XX_REG_BUCK1_VOLT_RUN,
+			.vsel_mask = DVS_BUCK_RUN_MASK,
+			.enable_reg = BD718XX_REG_BUCK1_CTRL,
+			.enable_mask = BD718XX_BUCK_EN,
+			.owner = THIS_MODULE,
+		},
+		.init = {
+			.reg = BD718XX_REG_BUCK1_CTRL,
+			.mask = BD718XX_BUCK_SEL,
+			.val = BD718XX_BUCK_SEL,
+		},
+	},
+	{
+		.desc = {
+			.name = "buck2",
+			.of_match = of_match_ptr("BUCK2"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = BD718XX_BUCK2,
+			.ops = &bd718xx_dvs_buck_regulator_ops,
+			.type = REGULATOR_VOLTAGE,
+			.n_voltages = BD718XX_DVS_BUCK_VOLTAGE_NUM,
+			.linear_ranges = bd718xx_dvs_buck_volts,
+			.n_linear_ranges = ARRAY_SIZE(bd718xx_dvs_buck_volts),
+			.vsel_reg = BD718XX_REG_BUCK2_VOLT_RUN,
+			.vsel_mask = DVS_BUCK_RUN_MASK,
+			.enable_reg = BD718XX_REG_BUCK2_CTRL,
+			.enable_mask = BD718XX_BUCK_EN,
+			.owner = THIS_MODULE,
+		},
+		.init = {
+			.reg = BD718XX_REG_BUCK2_CTRL,
+			.mask = BD718XX_BUCK_SEL,
+			.val = BD718XX_BUCK_SEL,
+		},
+	},
+	{
+		.desc = {
+			.name = "buck3",
+			.of_match = of_match_ptr("BUCK3"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = BD718XX_BUCK3,
+			.ops = &bd718xx_pickable_range_buck_ops,
+			.type = REGULATOR_VOLTAGE,
+			.n_voltages = BD71847_BUCK3_VOLTAGE_NUM,
+			.linear_ranges = bd71847_buck3_volts,
+			.n_linear_ranges =
+				ARRAY_SIZE(bd71847_buck3_volts),
+			.vsel_reg = BD718XX_REG_1ST_NODVS_BUCK_VOLT,
+			.vsel_mask = BD718XX_1ST_NODVS_BUCK_MASK,
+			.vsel_range_reg = BD718XX_REG_1ST_NODVS_BUCK_VOLT,
+			.vsel_range_mask = BD71847_BUCK3_RANGE_MASK,
+			.linear_range_selectors = bd71847_buck3_volt_range_sel,
+			.enable_reg = BD718XX_REG_1ST_NODVS_BUCK_CTRL,
+			.enable_mask = BD718XX_BUCK_EN,
+			.owner = THIS_MODULE,
+		},
+		.init = {
+			.reg = BD718XX_REG_1ST_NODVS_BUCK_CTRL,
+			.mask = BD718XX_BUCK_SEL,
+			.val = BD718XX_BUCK_SEL,
+		},
+	},
+	{
+		.desc = {
+			.name = "buck4",
+			.of_match = of_match_ptr("BUCK4"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = BD718XX_BUCK4,
+			.ops = &bd718xx_pickable_range_buck_ops,
+			.type = REGULATOR_VOLTAGE,
+			.n_voltages = BD71847_BUCK4_VOLTAGE_NUM,
+			.linear_ranges = bd71847_buck4_volts,
+			.n_linear_ranges =
+				ARRAY_SIZE(bd71847_buck4_volts),
+			.enable_reg = BD718XX_REG_2ND_NODVS_BUCK_CTRL,
+			.vsel_reg = BD718XX_REG_2ND_NODVS_BUCK_VOLT,
+			.vsel_mask = BD71847_BUCK4_MASK,
+			.vsel_range_reg = BD718XX_REG_2ND_NODVS_BUCK_VOLT,
+			.vsel_range_mask = BD71847_BUCK4_RANGE_MASK,
+			.linear_range_selectors = bd71847_buck4_volt_range_sel,
+			.enable_mask = BD718XX_BUCK_EN,
+			.owner = THIS_MODULE,
+		},
+		.init = {
+			.reg = BD718XX_REG_2ND_NODVS_BUCK_CTRL,
+			.mask = BD718XX_BUCK_SEL,
+			.val = BD718XX_BUCK_SEL,
+		},
+	},
+	{
+		.desc = {
+			.name = "buck5",
+			.of_match = of_match_ptr("BUCK5"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = BD718XX_BUCK5,
+			.ops = &bd718xx_buck_regulator_nolinear_ops,
+			.type = REGULATOR_VOLTAGE,
+			.volt_table = &bd718xx_3rd_nodvs_buck_volts[0],
+			.n_voltages = ARRAY_SIZE(bd718xx_3rd_nodvs_buck_volts),
+			.vsel_reg = BD718XX_REG_3RD_NODVS_BUCK_VOLT,
+			.vsel_mask = BD718XX_3RD_NODVS_BUCK_MASK,
+			.enable_reg = BD718XX_REG_3RD_NODVS_BUCK_CTRL,
+			.enable_mask = BD718XX_BUCK_EN,
+			.owner = THIS_MODULE,
+		},
+		.init = {
+			.reg = BD718XX_REG_3RD_NODVS_BUCK_CTRL,
+			.mask = BD718XX_BUCK_SEL,
+			.val = BD718XX_BUCK_SEL,
+		},
+	},
+	{
+		.desc = {
+			.name = "buck6",
+			.of_match = of_match_ptr("BUCK6"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = BD718XX_BUCK6,
+			.ops = &bd718xx_buck_regulator_ops,
+			.type = REGULATOR_VOLTAGE,
+			.n_voltages = BD718XX_4TH_NODVS_BUCK_VOLTAGE_NUM,
+			.linear_ranges = bd718xx_4th_nodvs_buck_volts,
+			.n_linear_ranges =
+				ARRAY_SIZE(bd718xx_4th_nodvs_buck_volts),
+			.vsel_reg = BD718XX_REG_4TH_NODVS_BUCK_VOLT,
+			.vsel_mask = BD718XX_4TH_NODVS_BUCK_MASK,
+			.enable_reg = BD718XX_REG_4TH_NODVS_BUCK_CTRL,
+			.enable_mask = BD718XX_BUCK_EN,
+			.owner = THIS_MODULE,
+		},
+		.init = {
+			.reg = BD718XX_REG_4TH_NODVS_BUCK_CTRL,
+			.mask = BD718XX_BUCK_SEL,
+			.val = BD718XX_BUCK_SEL,
+		},
+	},
+	{
+		.desc = {
+			.name = "ldo1",
+			.of_match = of_match_ptr("LDO1"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = BD718XX_LDO1,
+			.ops = &bd718xx_pickable_range_ldo_ops,
+			.type = REGULATOR_VOLTAGE,
+			.n_voltages = BD718XX_LDO1_VOLTAGE_NUM,
+			.linear_ranges = bd718xx_ldo1_volts,
+			.n_linear_ranges = ARRAY_SIZE(bd718xx_ldo1_volts),
+			.vsel_reg = BD718XX_REG_LDO1_VOLT,
+			.vsel_mask = BD718XX_LDO1_MASK,
+			.vsel_range_reg = BD718XX_REG_LDO1_VOLT,
+			.vsel_range_mask = BD718XX_LDO1_RANGE_MASK,
+			.linear_range_selectors = bd718xx_ldo1_volt_range_sel,
+			.enable_reg = BD718XX_REG_LDO1_VOLT,
+			.enable_mask = BD718XX_LDO_EN,
+			.owner = THIS_MODULE,
+		},
+		.init = {
+			.reg = BD718XX_REG_LDO1_VOLT,
+			.mask = BD718XX_LDO_SEL,
+			.val = BD718XX_LDO_SEL,
+		},
+	},
+	{
+		.desc = {
+			.name = "ldo2",
+			.of_match = of_match_ptr("LDO2"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = BD718XX_LDO2,
+			.ops = &bd718xx_ldo_regulator_nolinear_ops,
+			.type = REGULATOR_VOLTAGE,
+			.volt_table = &ldo_2_volts[0],
+			.vsel_reg = BD718XX_REG_LDO2_VOLT,
+			.vsel_mask = BD718XX_LDO2_MASK,
+			.n_voltages = ARRAY_SIZE(ldo_2_volts),
+			.enable_reg = BD718XX_REG_LDO2_VOLT,
+			.enable_mask = BD718XX_LDO_EN,
+			.owner = THIS_MODULE,
+		},
+		.init = {
+			.reg = BD718XX_REG_LDO2_VOLT,
+			.mask = BD718XX_LDO_SEL,
+			.val = BD718XX_LDO_SEL,
+		},
+	},
+	{
+		.desc = {
+			.name = "ldo3",
+			.of_match = of_match_ptr("LDO3"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = BD718XX_LDO3,
+			.ops = &bd718xx_ldo_regulator_ops,
+			.type = REGULATOR_VOLTAGE,
+			.n_voltages = BD718XX_LDO3_VOLTAGE_NUM,
+			.linear_ranges = bd718xx_ldo3_volts,
+			.n_linear_ranges = ARRAY_SIZE(bd718xx_ldo3_volts),
+			.vsel_reg = BD718XX_REG_LDO3_VOLT,
+			.vsel_mask = BD718XX_LDO3_MASK,
+			.enable_reg = BD718XX_REG_LDO3_VOLT,
+			.enable_mask = BD718XX_LDO_EN,
+			.owner = THIS_MODULE,
+		},
+		.init = {
+			.reg = BD718XX_REG_LDO3_VOLT,
+			.mask = BD718XX_LDO_SEL,
+			.val = BD718XX_LDO_SEL,
+		},
+	},
+	{
+		.desc = {
+			.name = "ldo4",
+			.of_match = of_match_ptr("LDO4"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = BD718XX_LDO4,
+			.ops = &bd718xx_ldo_regulator_ops,
+			.type = REGULATOR_VOLTAGE,
+			.n_voltages = BD718XX_LDO4_VOLTAGE_NUM,
+			.linear_ranges = bd718xx_ldo4_volts,
+			.n_linear_ranges = ARRAY_SIZE(bd718xx_ldo4_volts),
+			.vsel_reg = BD718XX_REG_LDO4_VOLT,
+			.vsel_mask = BD718XX_LDO4_MASK,
+			.enable_reg = BD718XX_REG_LDO4_VOLT,
+			.enable_mask = BD718XX_LDO_EN,
+			.owner = THIS_MODULE,
+		},
+		.init = {
+			.reg = BD718XX_REG_LDO4_VOLT,
+			.mask = BD718XX_LDO_SEL,
+			.val = BD718XX_LDO_SEL,
+		},
+	},
+	{
+		.desc = {
+			.name = "ldo5",
+			.of_match = of_match_ptr("LDO5"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = BD718XX_LDO5,
+			.ops = &bd718xx_pickable_range_ldo_ops,
+			.type = REGULATOR_VOLTAGE,
+			.n_voltages = BD71847_LDO5_VOLTAGE_NUM,
+			.linear_ranges = bd71847_ldo5_volts,
+			.n_linear_ranges = ARRAY_SIZE(bd71847_ldo5_volts),
+			.vsel_reg = BD718XX_REG_LDO5_VOLT,
+			.vsel_mask = BD71847_LDO5_MASK,
+			.vsel_range_reg = BD718XX_REG_LDO5_VOLT,
+			.vsel_range_mask = BD71847_LDO5_RANGE_MASK,
+			.linear_range_selectors = bd71847_ldo5_volt_range_sel,
+			.enable_reg = BD718XX_REG_LDO5_VOLT,
+			.enable_mask = BD718XX_LDO_EN,
+			.owner = THIS_MODULE,
+		},
+		.init = {
+			.reg = BD718XX_REG_LDO5_VOLT,
+			.mask = BD718XX_LDO_SEL,
+			.val = BD718XX_LDO_SEL,
+		},
+	},
+	{
+		.desc = {
+			.name = "ldo6",
+			.of_match = of_match_ptr("LDO6"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = BD718XX_LDO6,
+			.ops = &bd718xx_ldo_regulator_ops,
+			.type = REGULATOR_VOLTAGE,
+			.n_voltages = BD718XX_LDO6_VOLTAGE_NUM,
+			.linear_ranges = bd718xx_ldo6_volts,
+			.n_linear_ranges = ARRAY_SIZE(bd718xx_ldo6_volts),
+			/* LDO6 is supplied by buck5 */
+			.supply_name = "buck5",
+			.vsel_reg = BD718XX_REG_LDO6_VOLT,
+			.vsel_mask = BD718XX_LDO6_MASK,
+			.enable_reg = BD718XX_REG_LDO6_VOLT,
+			.enable_mask = BD718XX_LDO_EN,
+			.owner = THIS_MODULE,
+		},
+		.init = {
+			.reg = BD718XX_REG_LDO6_VOLT,
+			.mask = BD718XX_LDO_SEL,
+			.val = BD718XX_LDO_SEL,
+		},
+	},
+};
+
+static const struct bd718xx_regulator_data bd71837_regulators[] = {
+	{
+		.desc = {
+			.name = "buck1",
+			.of_match = of_match_ptr("BUCK1"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = BD718XX_BUCK1,
+			.ops = &bd718xx_dvs_buck_regulator_ops,
+			.type = REGULATOR_VOLTAGE,
+			.n_voltages = BD718XX_DVS_BUCK_VOLTAGE_NUM,
+			.linear_ranges = bd718xx_dvs_buck_volts,
+			.n_linear_ranges = ARRAY_SIZE(bd718xx_dvs_buck_volts),
+			.vsel_reg = BD718XX_REG_BUCK1_VOLT_RUN,
+			.vsel_mask = DVS_BUCK_RUN_MASK,
+			.enable_reg = BD718XX_REG_BUCK1_CTRL,
+			.enable_mask = BD718XX_BUCK_EN,
+			.owner = THIS_MODULE,
+		},
+		.init = {
+			.reg = BD718XX_REG_BUCK1_CTRL,
+			.mask = BD718XX_BUCK_SEL,
+			.val = BD718XX_BUCK_SEL,
+		},
+	},
+	{
+		.desc = {
+			.name = "buck2",
+			.of_match = of_match_ptr("BUCK2"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = BD718XX_BUCK2,
+			.ops = &bd718xx_dvs_buck_regulator_ops,
+			.type = REGULATOR_VOLTAGE,
+			.n_voltages = BD718XX_DVS_BUCK_VOLTAGE_NUM,
+			.linear_ranges = bd718xx_dvs_buck_volts,
+			.n_linear_ranges = ARRAY_SIZE(bd718xx_dvs_buck_volts),
+			.vsel_reg = BD718XX_REG_BUCK2_VOLT_RUN,
+			.vsel_mask = DVS_BUCK_RUN_MASK,
+			.enable_reg = BD718XX_REG_BUCK2_CTRL,
+			.enable_mask = BD718XX_BUCK_EN,
+			.owner = THIS_MODULE,
+		},
+		.init = {
+			.reg = BD718XX_REG_BUCK2_CTRL,
+			.mask = BD718XX_BUCK_SEL,
+			.val = BD718XX_BUCK_SEL,
+		},
+	},
+	{
+		.desc = {
+			.name = "buck3",
+			.of_match = of_match_ptr("BUCK3"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = BD718XX_BUCK3,
+			.ops = &bd718xx_dvs_buck_regulator_ops,
+			.type = REGULATOR_VOLTAGE,
+			.n_voltages = BD718XX_DVS_BUCK_VOLTAGE_NUM,
+			.linear_ranges = bd718xx_dvs_buck_volts,
+			.n_linear_ranges = ARRAY_SIZE(bd718xx_dvs_buck_volts),
+			.vsel_reg = BD71837_REG_BUCK3_VOLT_RUN,
+			.vsel_mask = DVS_BUCK_RUN_MASK,
+			.enable_reg = BD71837_REG_BUCK3_CTRL,
+			.enable_mask = BD718XX_BUCK_EN,
+			.owner = THIS_MODULE,
+		},
+		.init = {
+			.reg = BD71837_REG_BUCK3_CTRL,
+			.mask = BD718XX_BUCK_SEL,
+			.val = BD718XX_BUCK_SEL,
+		},
+	},
+	{
+		.desc = {
+			.name = "buck4",
+			.of_match = of_match_ptr("BUCK4"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = BD718XX_BUCK4,
+			.ops = &bd718xx_dvs_buck_regulator_ops,
+			.type = REGULATOR_VOLTAGE,
+			.n_voltages = BD718XX_DVS_BUCK_VOLTAGE_NUM,
+			.linear_ranges = bd718xx_dvs_buck_volts,
+			.n_linear_ranges = ARRAY_SIZE(bd718xx_dvs_buck_volts),
+			.vsel_reg = BD71837_REG_BUCK4_VOLT_RUN,
+			.vsel_mask = DVS_BUCK_RUN_MASK,
+			.enable_reg = BD71837_REG_BUCK4_CTRL,
+			.enable_mask = BD718XX_BUCK_EN,
+			.owner = THIS_MODULE,
+		},
+		.init = {
+			.reg = BD71837_REG_BUCK4_CTRL,
+			.mask = BD718XX_BUCK_SEL,
+			.val = BD718XX_BUCK_SEL,
+		},
+	},
+	{
+		.desc = {
+			.name = "buck5",
+			.of_match = of_match_ptr("BUCK5"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = BD718XX_BUCK5,
+			.ops = &bd718xx_pickable_range_buck_ops,
+			.type = REGULATOR_VOLTAGE,
+			.n_voltages = BD71837_BUCK5_VOLTAGE_NUM,
+			.linear_ranges = bd71837_buck5_volts,
+			.n_linear_ranges =
+				ARRAY_SIZE(bd71837_buck5_volts),
+			.vsel_reg = BD718XX_REG_1ST_NODVS_BUCK_VOLT,
+			.vsel_mask = BD71837_BUCK5_MASK,
+			.vsel_range_reg = BD718XX_REG_1ST_NODVS_BUCK_VOLT,
+			.vsel_range_mask = BD71837_BUCK5_RANGE_MASK,
+			.linear_range_selectors = bd71837_buck5_volt_range_sel,
+			.enable_reg = BD718XX_REG_1ST_NODVS_BUCK_CTRL,
+			.enable_mask = BD718XX_BUCK_EN,
+			.owner = THIS_MODULE,
+		},
+		.init = {
+			.reg = BD718XX_REG_1ST_NODVS_BUCK_CTRL,
+			.mask = BD718XX_BUCK_SEL,
+			.val = BD718XX_BUCK_SEL,
+		},
+	},
+	{
+		.desc = {
+			.name = "buck6",
+			.of_match = of_match_ptr("BUCK6"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = BD718XX_BUCK6,
+			.ops = &bd718xx_buck_regulator_ops,
+			.type = REGULATOR_VOLTAGE,
+			.n_voltages = BD71837_BUCK6_VOLTAGE_NUM,
+			.linear_ranges = bd71837_buck6_volts,
+			.n_linear_ranges =
+				ARRAY_SIZE(bd71837_buck6_volts),
+			.vsel_reg = BD718XX_REG_2ND_NODVS_BUCK_VOLT,
+			.vsel_mask = BD71837_BUCK6_MASK,
+			.enable_reg = BD718XX_REG_2ND_NODVS_BUCK_CTRL,
+			.enable_mask = BD718XX_BUCK_EN,
+			.owner = THIS_MODULE,
+		},
+		.init = {
+			.reg = BD718XX_REG_2ND_NODVS_BUCK_CTRL,
+			.mask = BD718XX_BUCK_SEL,
+			.val = BD718XX_BUCK_SEL,
+		},
+	},
+	{
+		.desc = {
+			.name = "buck7",
+			.of_match = of_match_ptr("BUCK7"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = BD718XX_BUCK7,
+			.ops = &bd718xx_buck_regulator_nolinear_ops,
+			.type = REGULATOR_VOLTAGE,
+			.volt_table = &bd718xx_3rd_nodvs_buck_volts[0],
+			.n_voltages = ARRAY_SIZE(bd718xx_3rd_nodvs_buck_volts),
+			.vsel_reg = BD718XX_REG_3RD_NODVS_BUCK_VOLT,
+			.vsel_mask = BD718XX_3RD_NODVS_BUCK_MASK,
+			.enable_reg = BD718XX_REG_3RD_NODVS_BUCK_CTRL,
+			.enable_mask = BD718XX_BUCK_EN,
+			.owner = THIS_MODULE,
+		},
+		.init = {
+			.reg = BD718XX_REG_3RD_NODVS_BUCK_CTRL,
+			.mask = BD718XX_BUCK_SEL,
+			.val = BD718XX_BUCK_SEL,
+		},
+	},
+	{
+		.desc = {
+			.name = "buck8",
+			.of_match = of_match_ptr("BUCK8"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = BD718XX_BUCK8,
+			.ops = &bd718xx_buck_regulator_ops,
+			.type = REGULATOR_VOLTAGE,
+			.n_voltages = BD718XX_4TH_NODVS_BUCK_VOLTAGE_NUM,
+			.linear_ranges = bd718xx_4th_nodvs_buck_volts,
+			.n_linear_ranges =
+				ARRAY_SIZE(bd718xx_4th_nodvs_buck_volts),
+			.vsel_reg = BD718XX_REG_4TH_NODVS_BUCK_VOLT,
+			.vsel_mask = BD718XX_4TH_NODVS_BUCK_MASK,
+			.enable_reg = BD718XX_REG_4TH_NODVS_BUCK_CTRL,
+			.enable_mask = BD718XX_BUCK_EN,
+			.owner = THIS_MODULE,
+		},
+		.init = {
+			.reg = BD718XX_REG_4TH_NODVS_BUCK_CTRL,
+			.mask = BD718XX_BUCK_SEL,
+			.val = BD718XX_BUCK_SEL,
+		},
+	},
+	{
+		.desc = {
+			.name = "ldo1",
+			.of_match = of_match_ptr("LDO1"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = BD718XX_LDO1,
+			.ops = &bd718xx_pickable_range_ldo_ops,
+			.type = REGULATOR_VOLTAGE,
+			.n_voltages = BD718XX_LDO1_VOLTAGE_NUM,
+			.linear_ranges = bd718xx_ldo1_volts,
+			.n_linear_ranges = ARRAY_SIZE(bd718xx_ldo1_volts),
+			.vsel_reg = BD718XX_REG_LDO1_VOLT,
+			.vsel_mask = BD718XX_LDO1_MASK,
+			.vsel_range_reg = BD718XX_REG_LDO1_VOLT,
+			.vsel_range_mask = BD718XX_LDO1_RANGE_MASK,
+			.linear_range_selectors = bd718xx_ldo1_volt_range_sel,
+			.enable_reg = BD718XX_REG_LDO1_VOLT,
+			.enable_mask = BD718XX_LDO_EN,
+			.owner = THIS_MODULE,
+		},
+		.init = {
+			.reg = BD718XX_REG_LDO1_VOLT,
+			.mask = BD718XX_LDO_SEL,
+			.val = BD718XX_LDO_SEL,
+		},
+	},
+	{
+		.desc = {
+			.name = "ldo2",
+			.of_match = of_match_ptr("LDO2"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = BD718XX_LDO2,
+			.ops = &bd718xx_ldo_regulator_nolinear_ops,
+			.type = REGULATOR_VOLTAGE,
+			.volt_table = &ldo_2_volts[0],
+			.vsel_reg = BD718XX_REG_LDO2_VOLT,
+			.vsel_mask = BD718XX_LDO2_MASK,
+			.n_voltages = ARRAY_SIZE(ldo_2_volts),
+			.enable_reg = BD718XX_REG_LDO2_VOLT,
+			.enable_mask = BD718XX_LDO_EN,
+			.owner = THIS_MODULE,
+		},
+		.init = {
+			.reg = BD718XX_REG_LDO2_VOLT,
+			.mask = BD718XX_LDO_SEL,
+			.val = BD718XX_LDO_SEL,
+		},
+	},
+	{
+		.desc = {
+			.name = "ldo3",
+			.of_match = of_match_ptr("LDO3"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = BD718XX_LDO3,
+			.ops = &bd718xx_ldo_regulator_ops,
+			.type = REGULATOR_VOLTAGE,
+			.n_voltages = BD718XX_LDO3_VOLTAGE_NUM,
+			.linear_ranges = bd718xx_ldo3_volts,
+			.n_linear_ranges = ARRAY_SIZE(bd718xx_ldo3_volts),
+			.vsel_reg = BD718XX_REG_LDO3_VOLT,
+			.vsel_mask = BD718XX_LDO3_MASK,
+			.enable_reg = BD718XX_REG_LDO3_VOLT,
+			.enable_mask = BD718XX_LDO_EN,
+			.owner = THIS_MODULE,
+		},
+		.init = {
+			.reg = BD718XX_REG_LDO3_VOLT,
+			.mask = BD718XX_LDO_SEL,
+			.val = BD718XX_LDO_SEL,
+		},
+	},
+	{
+		.desc = {
+			.name = "ldo4",
+			.of_match = of_match_ptr("LDO4"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = BD718XX_LDO4,
+			.ops = &bd718xx_ldo_regulator_ops,
+			.type = REGULATOR_VOLTAGE,
+			.n_voltages = BD718XX_LDO4_VOLTAGE_NUM,
+			.linear_ranges = bd718xx_ldo4_volts,
+			.n_linear_ranges = ARRAY_SIZE(bd718xx_ldo4_volts),
+			.vsel_reg = BD718XX_REG_LDO4_VOLT,
+			.vsel_mask = BD718XX_LDO4_MASK,
+			.enable_reg = BD718XX_REG_LDO4_VOLT,
+			.enable_mask = BD718XX_LDO_EN,
+			.owner = THIS_MODULE,
+		},
+		.init = {
+			.reg = BD718XX_REG_LDO4_VOLT,
+			.mask = BD718XX_LDO_SEL,
+			.val = BD718XX_LDO_SEL,
+		},
+	},
+	{
+		.desc = {
+			.name = "ldo5",
+			.of_match = of_match_ptr("LDO5"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = BD718XX_LDO5,
+			.ops = &bd718xx_ldo_regulator_ops,
+			.type = REGULATOR_VOLTAGE,
+			.n_voltages = BD71837_LDO5_VOLTAGE_NUM,
+			.linear_ranges = bd71837_ldo5_volts,
+			.n_linear_ranges = ARRAY_SIZE(bd71837_ldo5_volts),
+			/* LDO5 is supplied by buck6 */
+			.supply_name = "buck6",
+			.vsel_reg = BD718XX_REG_LDO5_VOLT,
+			.vsel_mask = BD71837_LDO5_MASK,
+			.enable_reg = BD718XX_REG_LDO5_VOLT,
+			.enable_mask = BD718XX_LDO_EN,
+			.owner = THIS_MODULE,
+		},
+		.init = {
+			.reg = BD718XX_REG_LDO5_VOLT,
+			.mask = BD718XX_LDO_SEL,
+			.val = BD718XX_LDO_SEL,
+		},
+		.additional_inits = bd71837_ldo5_inits,
+		.additional_init_amnt = ARRAY_SIZE(bd71837_ldo5_inits),
+	},
+	{
+		.desc = {
+			.name = "ldo6",
+			.of_match = of_match_ptr("LDO6"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = BD718XX_LDO6,
+			.ops = &bd718xx_ldo_regulator_ops,
+			.type = REGULATOR_VOLTAGE,
+			.n_voltages = BD718XX_LDO6_VOLTAGE_NUM,
+			.linear_ranges = bd718xx_ldo6_volts,
+			.n_linear_ranges = ARRAY_SIZE(bd718xx_ldo6_volts),
+			/* LDO6 is supplied by buck7 */
+			.supply_name = "buck7",
+			.vsel_reg = BD718XX_REG_LDO6_VOLT,
+			.vsel_mask = BD718XX_LDO6_MASK,
+			.enable_reg = BD718XX_REG_LDO6_VOLT,
+			.enable_mask = BD718XX_LDO_EN,
+			.owner = THIS_MODULE,
+		},
+		.init = {
+			.reg = BD718XX_REG_LDO6_VOLT,
+			.mask = BD718XX_LDO_SEL,
+			.val = BD718XX_LDO_SEL,
+		},
+		.additional_inits = bd71837_ldo6_inits,
+		.additional_init_amnt = ARRAY_SIZE(bd71837_ldo6_inits),
+	},
+	{
+		.desc = {
+			.name = "ldo7",
+			.of_match = of_match_ptr("LDO7"),
+			.regulators_node = of_match_ptr("regulators"),
+			.id = BD718XX_LDO7,
+			.ops = &bd718xx_ldo_regulator_ops,
+			.type = REGULATOR_VOLTAGE,
+			.n_voltages = BD71837_LDO7_VOLTAGE_NUM,
+			.linear_ranges = bd71837_ldo7_volts,
+			.n_linear_ranges = ARRAY_SIZE(bd71837_ldo7_volts),
+			.vsel_reg = BD71837_REG_LDO7_VOLT,
+			.vsel_mask = BD71837_LDO7_MASK,
+			.enable_reg = BD71837_REG_LDO7_VOLT,
+			.enable_mask = BD718XX_LDO_EN,
+			.owner = THIS_MODULE,
+		},
+		.init = {
+			.reg = BD71837_REG_LDO7_VOLT,
+			.mask = BD718XX_LDO_SEL,
+			.val = BD718XX_LDO_SEL,
+		},
+	},
+};
+
+struct bd718xx_pmic_inits {
+	const struct bd718xx_regulator_data (*r_datas)[];
+	unsigned int r_amount;
+};
+
+static int bd718xx_probe(struct platform_device *pdev)
+{
+	struct bd718xx *mfd;
+	struct regulator_config config = { 0 };
+	struct bd718xx_pmic_inits pmic_regulators[] = {
+		[BD718XX_TYPE_BD71837] = {
+			.r_datas = &bd71837_regulators,
+			.r_amount = ARRAY_SIZE(bd71837_regulators),
+		},
+		[BD718XX_TYPE_BD71847] = {
+			.r_datas = &bd71847_regulators,
+			.r_amount = ARRAY_SIZE(bd71847_regulators),
+		},
+	};
+
+	int i, j, err;
+
+	mfd = dev_get_drvdata(pdev->dev.parent);
+	if (!mfd) {
+		dev_err(&pdev->dev, "No MFD driver data\n");
+		err = -EINVAL;
+		goto err;
+	}
+
+	if (mfd->chip_type >= BD718XX_TYPE_AMOUNT ||
+	    !pmic_regulators[mfd->chip_type].r_datas) {
+		dev_err(&pdev->dev, "Unsupported chip type\n");
+		err = -EINVAL;
+		goto err;
+	}
+
+	/* Register LOCK release */
+	err = regmap_update_bits(mfd->regmap, BD718XX_REG_REGLOCK,
+				 (REGLOCK_PWRSEQ | REGLOCK_VREG), 0);
+	if (err) {
+		dev_err(&pdev->dev, "Failed to unlock PMIC (%d)\n", err);
+		goto err;
+	} else {
+		dev_dbg(&pdev->dev, "Unlocked lock register 0x%x\n",
+			BD718XX_REG_REGLOCK);
+	}
+
+	for (i = 0; i < pmic_regulators[mfd->chip_type].r_amount; i++) {
+
+		const struct regulator_desc *desc;
+		struct regulator_dev *rdev;
+		const struct bd718xx_regulator_data *r;
+
+		r = &(*pmic_regulators[mfd->chip_type].r_datas)[i];
+		desc = &r->desc;
+
+		config.dev = pdev->dev.parent;
+		config.regmap = mfd->regmap;
+
+		rdev = devm_regulator_register(&pdev->dev, desc, &config);
+		if (IS_ERR(rdev)) {
+			dev_err(&pdev->dev,
+				"failed to register %s regulator\n",
+				desc->name);
+			err = PTR_ERR(rdev);
+			goto err;
+		}
+		/* Regulator register gets the regulator constraints and
+		 * applies them (set_machine_constraints). This should have
+		 * turned the control register(s) to correct values and we
+		 * can now switch the control from PMIC state machine to the
+		 * register interface
+		 */
+		err = regmap_update_bits(mfd->regmap, r->init.reg,
+					 r->init.mask, r->init.val);
+		if (err) {
+			dev_err(&pdev->dev,
+				"Failed to write BUCK/LDO SEL bit for (%s)\n",
+				desc->name);
+			goto err;
+		}
+		for (j = 0; j < r->additional_init_amnt; j++) {
+			err = regmap_update_bits(mfd->regmap,
+						 r->additional_inits[j].reg,
+						 r->additional_inits[j].mask,
+						 r->additional_inits[j].val);
+			if (err) {
+				dev_err(&pdev->dev,
+					"Buck (%s) initialization failed\n",
+					desc->name);
+				goto err;
+			}
+		}
+	}
+
+err:
+	return err;
+}
+
+static struct platform_driver bd718xx_regulator = {
+	.driver = {
+		.name = "bd718xx-pmic",
+	},
+	.probe = bd718xx_probe,
+};
+
+module_platform_driver(bd718xx_regulator);
+
+MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>");
+MODULE_DESCRIPTION("BD71837/BD71847 voltage regulator driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 9577d8941846..2c66b528aede 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -426,19 +426,24 @@ static ssize_t name_show(struct device *dev, struct device_attribute *attr,
 }
 static DEVICE_ATTR_RO(name);
 
-static ssize_t regulator_print_opmode(char *buf, int mode)
+static const char *regulator_opmode_to_str(int mode)
 {
 	switch (mode) {
 	case REGULATOR_MODE_FAST:
-		return sprintf(buf, "fast\n");
+		return "fast";
 	case REGULATOR_MODE_NORMAL:
-		return sprintf(buf, "normal\n");
+		return "normal";
 	case REGULATOR_MODE_IDLE:
-		return sprintf(buf, "idle\n");
+		return "idle";
 	case REGULATOR_MODE_STANDBY:
-		return sprintf(buf, "standby\n");
+		return "standby";
 	}
-	return sprintf(buf, "unknown\n");
+	return "unknown";
+}
+
+static ssize_t regulator_print_opmode(char *buf, int mode)
+{
+	return sprintf(buf, "%s\n", regulator_opmode_to_str(mode));
 }
 
 static ssize_t regulator_opmode_show(struct device *dev,
@@ -2783,6 +2788,11 @@ static int regulator_map_voltage(struct regulator_dev *rdev, int min_uV,
 	if (desc->ops->list_voltage == regulator_list_voltage_linear_range)
 		return regulator_map_voltage_linear_range(rdev, min_uV, max_uV);
 
+	if (desc->ops->list_voltage ==
+		regulator_list_voltage_pickable_linear_range)
+		return regulator_map_voltage_pickable_linear_range(rdev,
+							min_uV, max_uV);
+
 	return regulator_map_voltage_iterate(rdev, min_uV, max_uV);
 }
 
@@ -3470,21 +3480,23 @@ out:
 }
 EXPORT_SYMBOL_GPL(regulator_set_current_limit);
 
+static int _regulator_get_current_limit_unlocked(struct regulator_dev *rdev)
+{
+	/* sanity check */
+	if (!rdev->desc->ops->get_current_limit)
+		return -EINVAL;
+
+	return rdev->desc->ops->get_current_limit(rdev);
+}
+
 static int _regulator_get_current_limit(struct regulator_dev *rdev)
 {
 	int ret;
 
 	regulator_lock(rdev);
-
-	/* sanity check */
-	if (!rdev->desc->ops->get_current_limit) {
-		ret = -EINVAL;
-		goto out;
-	}
-
-	ret = rdev->desc->ops->get_current_limit(rdev);
-out:
+	ret = _regulator_get_current_limit_unlocked(rdev);
 	regulator_unlock(rdev);
+
 	return ret;
 }
 
@@ -3549,21 +3561,23 @@ out:
 }
 EXPORT_SYMBOL_GPL(regulator_set_mode);
 
+static unsigned int _regulator_get_mode_unlocked(struct regulator_dev *rdev)
+{
+	/* sanity check */
+	if (!rdev->desc->ops->get_mode)
+		return -EINVAL;
+
+	return rdev->desc->ops->get_mode(rdev);
+}
+
 static unsigned int _regulator_get_mode(struct regulator_dev *rdev)
 {
 	int ret;
 
 	regulator_lock(rdev);
-
-	/* sanity check */
-	if (!rdev->desc->ops->get_mode) {
-		ret = -EINVAL;
-		goto out;
-	}
-
-	ret = rdev->desc->ops->get_mode(rdev);
-out:
+	ret = _regulator_get_mode_unlocked(rdev);
 	regulator_unlock(rdev);
+
 	return ret;
 }
 
@@ -4455,41 +4469,33 @@ void regulator_unregister(struct regulator_dev *rdev)
 EXPORT_SYMBOL_GPL(regulator_unregister);
 
 #ifdef CONFIG_SUSPEND
-static int _regulator_suspend(struct device *dev, void *data)
-{
-	struct regulator_dev *rdev = dev_to_rdev(dev);
-	suspend_state_t *state = data;
-	int ret;
-
-	regulator_lock(rdev);
-	ret = suspend_set_state(rdev, *state);
-	regulator_unlock(rdev);
-
-	return ret;
-}
-
 /**
  * regulator_suspend - prepare regulators for system wide suspend
- * @state: system suspend state
+ * @dev: ``&struct device`` pointer that is passed to _regulator_suspend()
  *
  * Configure each regulator with it's suspend operating parameters for state.
  */
 static int regulator_suspend(struct device *dev)
 {
+	struct regulator_dev *rdev = dev_to_rdev(dev);
 	suspend_state_t state = pm_suspend_target_state;
+	int ret;
+
+	regulator_lock(rdev);
+	ret = suspend_set_state(rdev, state);
+	regulator_unlock(rdev);
 
-	return class_for_each_device(&regulator_class, NULL, &state,
-				     _regulator_suspend);
+	return ret;
 }
 
-static int _regulator_resume(struct device *dev, void *data)
+static int regulator_resume(struct device *dev)
 {
-	int ret = 0;
+	suspend_state_t state = pm_suspend_target_state;
 	struct regulator_dev *rdev = dev_to_rdev(dev);
-	suspend_state_t *state = data;
 	struct regulator_state *rstate;
+	int ret = 0;
 
-	rstate = regulator_get_suspend_state(rdev, *state);
+	rstate = regulator_get_suspend_state(rdev, state);
 	if (rstate == NULL)
 		return 0;
 
@@ -4504,15 +4510,6 @@ static int _regulator_resume(struct device *dev, void *data)
 
 	return ret;
 }
-
-static int regulator_resume(struct device *dev)
-{
-	suspend_state_t state = pm_suspend_target_state;
-
-	return class_for_each_device(&regulator_class, NULL, &state,
-				     _regulator_resume);
-}
-
 #else /* !CONFIG_SUSPEND */
 
 #define regulator_suspend	NULL
@@ -4670,17 +4667,23 @@ static void regulator_summary_show_subtree(struct seq_file *s,
 	struct regulation_constraints *c;
 	struct regulator *consumer;
 	struct summary_data summary_data;
+	unsigned int opmode;
 
 	if (!rdev)
 		return;
 
-	seq_printf(s, "%*s%-*s %3d %4d %6d ",
+	regulator_lock_nested(rdev, level);
+
+	opmode = _regulator_get_mode_unlocked(rdev);
+	seq_printf(s, "%*s%-*s %3d %4d %6d %7s ",
 		   level * 3 + 1, "",
 		   30 - level * 3, rdev_get_name(rdev),
-		   rdev->use_count, rdev->open_count, rdev->bypass_count);
+		   rdev->use_count, rdev->open_count, rdev->bypass_count,
+		   regulator_opmode_to_str(opmode));
 
 	seq_printf(s, "%5dmV ", _regulator_get_voltage(rdev) / 1000);
-	seq_printf(s, "%5dmA ", _regulator_get_current_limit(rdev) / 1000);
+	seq_printf(s, "%5dmA ",
+		   _regulator_get_current_limit_unlocked(rdev) / 1000);
 
 	c = rdev->constraints;
 	if (c) {
@@ -4709,7 +4712,8 @@ static void regulator_summary_show_subtree(struct seq_file *s,
 
 		switch (rdev->desc->type) {
 		case REGULATOR_VOLTAGE:
-			seq_printf(s, "%37dmV %5dmV",
+			seq_printf(s, "%37dmA %5dmV %5dmV",
+				   consumer->uA_load / 1000,
 				   consumer->voltage[PM_SUSPEND_ON].min_uV / 1000,
 				   consumer->voltage[PM_SUSPEND_ON].max_uV / 1000);
 			break;
@@ -4726,6 +4730,8 @@ static void regulator_summary_show_subtree(struct seq_file *s,
 
 	class_for_each_device(&regulator_class, NULL, &summary_data,
 			      regulator_summary_show_children);
+
+	regulator_unlock(rdev);
 }
 
 static int regulator_summary_show_roots(struct device *dev, void *data)
@@ -4741,8 +4747,8 @@ static int regulator_summary_show_roots(struct device *dev, void *data)
 
 static int regulator_summary_show(struct seq_file *s, void *data)
 {
-	seq_puts(s, " regulator                      use open bypass voltage current     min     max\n");
-	seq_puts(s, "-------------------------------------------------------------------------------\n");
+	seq_puts(s, " regulator                      use open bypass  opmode voltage current     min     max\n");
+	seq_puts(s, "---------------------------------------------------------------------------------------\n");
 
 	class_for_each_device(&regulator_class, NULL, s,
 			      regulator_summary_show_roots);
diff --git a/drivers/regulator/da9052-regulator.c b/drivers/regulator/da9052-regulator.c
index 9ececfef42d6..37e4025203e3 100644
--- a/drivers/regulator/da9052-regulator.c
+++ b/drivers/regulator/da9052-regulator.c
@@ -420,7 +420,7 @@ static int da9052_regulator_probe(struct platform_device *pdev)
 	config.dev = &pdev->dev;
 	config.driver_data = regulator;
 	config.regmap = da9052->regmap;
-	if (pdata && pdata->regulators) {
+	if (pdata) {
 		config.init_data = pdata->regulators[cell->id];
 	} else {
 #ifdef CONFIG_OF
diff --git a/drivers/regulator/da9055-regulator.c b/drivers/regulator/da9055-regulator.c
index f40c3b8644ae..588c3d2445cf 100644
--- a/drivers/regulator/da9055-regulator.c
+++ b/drivers/regulator/da9055-regulator.c
@@ -612,7 +612,7 @@ static int da9055_regulator_probe(struct platform_device *pdev)
 	config.driver_data = regulator;
 	config.regmap = da9055->regmap;
 
-	if (pdata && pdata->regulators) {
+	if (pdata) {
 		config.init_data = pdata->regulators[pdev->id];
 	} else {
 		ret = da9055_regulator_dt_init(pdev, regulator, &config,
diff --git a/drivers/regulator/da9211-regulator.c b/drivers/regulator/da9211-regulator.c
index 6c122b3df5d0..8f68c7a05d27 100644
--- a/drivers/regulator/da9211-regulator.c
+++ b/drivers/regulator/da9211-regulator.c
@@ -294,11 +294,11 @@ static struct da9211_pdata *da9211_parse_regulators_dt(
 		pdata->init_data[n] = da9211_matches[i].init_data;
 		pdata->reg_node[n] = da9211_matches[i].of_node;
 		pdata->gpiod_ren[n] = devm_gpiod_get_from_of_node(dev,
-								  da9211_matches[i].of_node,
-								  "enable",
-								  0,
-								  GPIOD_OUT_HIGH,
-								  "da9211-enable");
+				  da9211_matches[i].of_node,
+				  "enable",
+				  0,
+				  GPIOD_OUT_HIGH | GPIOD_FLAGS_BIT_NONEXCLUSIVE,
+				  "da9211-enable");
 		n++;
 	}
 
diff --git a/drivers/regulator/fixed-helper.c b/drivers/regulator/fixed-helper.c
index 777fac6fb4cb..2c6098e6f4bc 100644
--- a/drivers/regulator/fixed-helper.c
+++ b/drivers/regulator/fixed-helper.c
@@ -43,7 +43,6 @@ struct platform_device *regulator_register_always_on(int id, const char *name,
 	}
 
 	data->cfg.microvolts = uv;
-	data->cfg.gpio = -EINVAL;
 	data->cfg.enabled_at_boot = 1;
 	data->cfg.init_data = &data->init_data;
 
diff --git a/drivers/regulator/fixed.c b/drivers/regulator/fixed.c
index 988a7472c2ab..ccc29038f19a 100644
--- a/drivers/regulator/fixed.c
+++ b/drivers/regulator/fixed.c
@@ -24,10 +24,9 @@
 #include <linux/platform_device.h>
 #include <linux/regulator/driver.h>
 #include <linux/regulator/fixed.h>
-#include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/slab.h>
 #include <linux/of.h>
-#include <linux/of_gpio.h>
 #include <linux/regulator/of_regulator.h>
 #include <linux/regulator/machine.h>
 
@@ -78,15 +77,16 @@ of_get_fixed_voltage_config(struct device *dev,
 	if (init_data->constraints.boot_on)
 		config->enabled_at_boot = true;
 
-	config->gpio = of_get_named_gpio(np, "gpio", 0);
-	if ((config->gpio < 0) && (config->gpio != -ENOENT))
-		return ERR_PTR(config->gpio);
-
 	of_property_read_u32(np, "startup-delay-us", &config->startup_delay);
 
-	config->enable_high = of_property_read_bool(np, "enable-active-high");
-	config->gpio_is_open_drain = of_property_read_bool(np,
-							   "gpio-open-drain");
+	/*
+	 * FIXME: we pulled active low/high and open drain handling into
+	 * gpiolib so it will be handled there. Delete this in the second
+	 * step when we also remove the custom inversion handling for all
+	 * legacy boardfiles.
+	 */
+	config->enable_high = 1;
+	config->gpio_is_open_drain = 0;
 
 	if (of_find_property(np, "vin-supply", NULL))
 		config->input_supply = "vin";
@@ -102,6 +102,7 @@ static int reg_fixed_voltage_probe(struct platform_device *pdev)
 	struct fixed_voltage_config *config;
 	struct fixed_voltage_data *drvdata;
 	struct regulator_config cfg = { };
+	enum gpiod_flags gflags;
 	int ret;
 
 	drvdata = devm_kzalloc(&pdev->dev, sizeof(struct fixed_voltage_data),
@@ -150,25 +151,41 @@ static int reg_fixed_voltage_probe(struct platform_device *pdev)
 
 	drvdata->desc.fixed_uV = config->microvolts;
 
-	if (gpio_is_valid(config->gpio)) {
-		cfg.ena_gpio = config->gpio;
-		if (pdev->dev.of_node)
-			cfg.ena_gpio_initialized = true;
-	}
 	cfg.ena_gpio_invert = !config->enable_high;
 	if (config->enabled_at_boot) {
 		if (config->enable_high)
-			cfg.ena_gpio_flags |= GPIOF_OUT_INIT_HIGH;
+			gflags = GPIOD_OUT_HIGH;
 		else
-			cfg.ena_gpio_flags |= GPIOF_OUT_INIT_LOW;
+			gflags = GPIOD_OUT_LOW;
 	} else {
 		if (config->enable_high)
-			cfg.ena_gpio_flags |= GPIOF_OUT_INIT_LOW;
+			gflags = GPIOD_OUT_LOW;
 		else
-			cfg.ena_gpio_flags |= GPIOF_OUT_INIT_HIGH;
+			gflags = GPIOD_OUT_HIGH;
 	}
-	if (config->gpio_is_open_drain)
-		cfg.ena_gpio_flags |= GPIOF_OPEN_DRAIN;
+	if (config->gpio_is_open_drain) {
+		if (gflags == GPIOD_OUT_HIGH)
+			gflags = GPIOD_OUT_HIGH_OPEN_DRAIN;
+		else
+			gflags = GPIOD_OUT_LOW_OPEN_DRAIN;
+	}
+
+	/*
+	 * Some fixed regulators share the enable line between two
+	 * regulators which makes it necessary to get a handle on the
+	 * same descriptor for two different consumers. This will get
+	 * the GPIO descriptor, but only the first call will initialize
+	 * it so any flags such as inversion or open drain will only
+	 * be set up by the first caller and assumed identical on the
+	 * next caller.
+	 *
+	 * FIXME: find a better way to deal with this.
+	 */
+	gflags |= GPIOD_FLAGS_BIT_NONEXCLUSIVE;
+
+	cfg.ena_gpiod = devm_gpiod_get_optional(&pdev->dev, NULL, gflags);
+	if (IS_ERR(cfg.ena_gpiod))
+		return PTR_ERR(cfg.ena_gpiod);
 
 	cfg.dev = &pdev->dev;
 	cfg.init_data = config->init_data;
diff --git a/drivers/regulator/helpers.c b/drivers/regulator/helpers.c
index 2ae7c3ac5940..5686a1335bd3 100644
--- a/drivers/regulator/helpers.c
+++ b/drivers/regulator/helpers.c
@@ -103,6 +103,128 @@ int regulator_disable_regmap(struct regulator_dev *rdev)
 }
 EXPORT_SYMBOL_GPL(regulator_disable_regmap);
 
+static int regulator_range_selector_to_index(struct regulator_dev *rdev,
+					     unsigned int rval)
+{
+	int i;
+
+	if (!rdev->desc->linear_range_selectors)
+		return -EINVAL;
+
+	rval &= rdev->desc->vsel_range_mask;
+
+	for (i = 0; i < rdev->desc->n_linear_ranges; i++) {
+		if (rdev->desc->linear_range_selectors[i] == rval)
+			return i;
+	}
+	return -EINVAL;
+}
+
+/**
+ * regulator_get_voltage_sel_pickable_regmap - pickable range get_voltage_sel
+ *
+ * @rdev: regulator to operate on
+ *
+ * Regulators that use regmap for their register I/O and use pickable
+ * ranges can set the vsel_reg, vsel_mask, vsel_range_reg and vsel_range_mask
+ * fields in their descriptor and then use this as their get_voltage_vsel
+ * operation, saving some code.
+ */
+int regulator_get_voltage_sel_pickable_regmap(struct regulator_dev *rdev)
+{
+	unsigned int r_val;
+	int range;
+	unsigned int val;
+	int ret, i;
+	unsigned int voltages_in_range = 0;
+
+	if (!rdev->desc->linear_ranges)
+		return -EINVAL;
+
+	ret = regmap_read(rdev->regmap, rdev->desc->vsel_reg, &val);
+	if (ret != 0)
+		return ret;
+
+	ret = regmap_read(rdev->regmap, rdev->desc->vsel_range_reg, &r_val);
+	if (ret != 0)
+		return ret;
+
+	val &= rdev->desc->vsel_mask;
+	val >>= ffs(rdev->desc->vsel_mask) - 1;
+
+	range = regulator_range_selector_to_index(rdev, r_val);
+	if (range < 0)
+		return -EINVAL;
+
+	for (i = 0; i < range; i++)
+		voltages_in_range += (rdev->desc->linear_ranges[i].max_sel -
+				     rdev->desc->linear_ranges[i].min_sel) + 1;
+
+	return val + voltages_in_range;
+}
+EXPORT_SYMBOL_GPL(regulator_get_voltage_sel_pickable_regmap);
+
+/**
+ * regulator_set_voltage_sel_pickable_regmap - pickable range set_voltage_sel
+ *
+ * @rdev: regulator to operate on
+ * @sel: Selector to set
+ *
+ * Regulators that use regmap for their register I/O and use pickable
+ * ranges can set the vsel_reg, vsel_mask, vsel_range_reg and vsel_range_mask
+ * fields in their descriptor and then use this as their set_voltage_vsel
+ * operation, saving some code.
+ */
+int regulator_set_voltage_sel_pickable_regmap(struct regulator_dev *rdev,
+					      unsigned int sel)
+{
+	unsigned int range;
+	int ret, i;
+	unsigned int voltages_in_range = 0;
+
+	for (i = 0; i < rdev->desc->n_linear_ranges; i++) {
+		voltages_in_range = (rdev->desc->linear_ranges[i].max_sel -
+				     rdev->desc->linear_ranges[i].min_sel) + 1;
+		if (sel < voltages_in_range)
+			break;
+		sel -= voltages_in_range;
+	}
+
+	if (i == rdev->desc->n_linear_ranges)
+		return -EINVAL;
+
+	sel <<= ffs(rdev->desc->vsel_mask) - 1;
+	sel += rdev->desc->linear_ranges[i].min_sel;
+
+	range = rdev->desc->linear_range_selectors[i];
+
+	if (rdev->desc->vsel_reg == rdev->desc->vsel_range_reg) {
+		ret = regmap_update_bits(rdev->regmap,
+					 rdev->desc->vsel_reg,
+					 rdev->desc->vsel_range_mask |
+					 rdev->desc->vsel_mask, sel | range);
+	} else {
+		ret = regmap_update_bits(rdev->regmap,
+					 rdev->desc->vsel_range_reg,
+					 rdev->desc->vsel_range_mask, range);
+		if (ret)
+			return ret;
+
+		ret = regmap_update_bits(rdev->regmap, rdev->desc->vsel_reg,
+				  rdev->desc->vsel_mask, sel);
+	}
+
+	if (ret)
+		return ret;
+
+	if (rdev->desc->apply_bit)
+		ret = regmap_update_bits(rdev->regmap, rdev->desc->apply_reg,
+					 rdev->desc->apply_bit,
+					 rdev->desc->apply_bit);
+	return ret;
+}
+EXPORT_SYMBOL_GPL(regulator_set_voltage_sel_pickable_regmap);
+
 /**
  * regulator_get_voltage_sel_regmap - standard get_voltage_sel for regmap users
  *
@@ -321,20 +443,91 @@ int regulator_map_voltage_linear_range(struct regulator_dev *rdev,
 
 		ret += range->min_sel;
 
-		break;
+		/*
+		 * Map back into a voltage to verify we're still in bounds.
+		 * If we are not, then continue checking rest of the ranges.
+		 */
+		voltage = rdev->desc->ops->list_voltage(rdev, ret);
+		if (voltage >= min_uV && voltage <= max_uV)
+			break;
 	}
 
 	if (i == rdev->desc->n_linear_ranges)
 		return -EINVAL;
 
-	/* Map back into a voltage to verify we're still in bounds */
-	voltage = rdev->desc->ops->list_voltage(rdev, ret);
-	if (voltage < min_uV || voltage > max_uV)
+	return ret;
+}
+EXPORT_SYMBOL_GPL(regulator_map_voltage_linear_range);
+
+/**
+ * regulator_map_voltage_pickable_linear_range - map_voltage, pickable ranges
+ *
+ * @rdev: Regulator to operate on
+ * @min_uV: Lower bound for voltage
+ * @max_uV: Upper bound for voltage
+ *
+ * Drivers providing pickable linear_ranges in their descriptor can use
+ * this as their map_voltage() callback.
+ */
+int regulator_map_voltage_pickable_linear_range(struct regulator_dev *rdev,
+						int min_uV, int max_uV)
+{
+	const struct regulator_linear_range *range;
+	int ret = -EINVAL;
+	int voltage, i;
+	unsigned int selector = 0;
+
+	if (!rdev->desc->n_linear_ranges) {
+		BUG_ON(!rdev->desc->n_linear_ranges);
+		return -EINVAL;
+	}
+
+	for (i = 0; i < rdev->desc->n_linear_ranges; i++) {
+		int linear_max_uV;
+
+		range = &rdev->desc->linear_ranges[i];
+		linear_max_uV = range->min_uV +
+			(range->max_sel - range->min_sel) * range->uV_step;
+
+		if (!(min_uV <= linear_max_uV && max_uV >= range->min_uV)) {
+			selector += (range->max_sel - range->min_sel + 1);
+			continue;
+		}
+
+		if (min_uV <= range->min_uV)
+			min_uV = range->min_uV;
+
+		/* range->uV_step == 0 means fixed voltage range */
+		if (range->uV_step == 0) {
+			ret = 0;
+		} else {
+			ret = DIV_ROUND_UP(min_uV - range->min_uV,
+					   range->uV_step);
+			if (ret < 0)
+				return ret;
+		}
+
+		ret += selector;
+
+		voltage = rdev->desc->ops->list_voltage(rdev, ret);
+
+		/*
+		 * Map back into a voltage to verify we're still in bounds.
+		 * We may have overlapping voltage ranges. Hence we don't
+		 * exit but retry until we have checked all ranges.
+		 */
+		if (voltage < min_uV || voltage > max_uV)
+			selector += (range->max_sel - range->min_sel + 1);
+		else
+			break;
+	}
+
+	if (i == rdev->desc->n_linear_ranges)
 		return -EINVAL;
 
 	return ret;
 }
-EXPORT_SYMBOL_GPL(regulator_map_voltage_linear_range);
+EXPORT_SYMBOL_GPL(regulator_map_voltage_pickable_linear_range);
 
 /**
  * regulator_list_voltage_linear - List voltages with simple calculation
@@ -361,6 +554,46 @@ int regulator_list_voltage_linear(struct regulator_dev *rdev,
 EXPORT_SYMBOL_GPL(regulator_list_voltage_linear);
 
 /**
+ * regulator_list_voltage_pickable_linear_range - pickable range list voltages
+ *
+ * @rdev: Regulator device
+ * @selector: Selector to convert into a voltage
+ *
+ * list_voltage() operation, intended to be used by drivers utilizing pickable
+ * ranges helpers.
+ */
+int regulator_list_voltage_pickable_linear_range(struct regulator_dev *rdev,
+						 unsigned int selector)
+{
+	const struct regulator_linear_range *range;
+	int i;
+	unsigned int all_sels = 0;
+
+	if (!rdev->desc->n_linear_ranges) {
+		BUG_ON(!rdev->desc->n_linear_ranges);
+		return -EINVAL;
+	}
+
+	for (i = 0; i < rdev->desc->n_linear_ranges; i++) {
+		unsigned int sels_in_range;
+
+		range = &rdev->desc->linear_ranges[i];
+
+		sels_in_range = range->max_sel - range->min_sel;
+
+		if (all_sels + sels_in_range >= selector) {
+			selector -= all_sels;
+			return range->min_uV + (range->uV_step * selector);
+		}
+
+		all_sels += (sels_in_range + 1);
+	}
+
+	return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(regulator_list_voltage_pickable_linear_range);
+
+/**
  * regulator_list_voltage_linear_range - List voltages for linear ranges
  *
  * @rdev: Regulator device
diff --git a/drivers/regulator/isl9305.c b/drivers/regulator/isl9305.c
index 257c1943e753..9c2607e912cf 100644
--- a/drivers/regulator/isl9305.c
+++ b/drivers/regulator/isl9305.c
@@ -84,6 +84,7 @@ static const struct regulator_desc isl9305_regulators[] = {
 		.enable_mask =	ISL9305_DCD1_EN,
 		.supply_name =	"VINDCD1",
 		.ops =		&isl9305_ops,
+		.owner =	THIS_MODULE,
 	},
 	[ISL9305_DCD2] = {
 		.name =		"DCD2",
@@ -98,6 +99,7 @@ static const struct regulator_desc isl9305_regulators[] = {
 		.enable_mask =	ISL9305_DCD2_EN,
 		.supply_name =	"VINDCD2",
 		.ops =		&isl9305_ops,
+		.owner =	THIS_MODULE,
 	},
 	[ISL9305_LDO1] = {
 		.name =		"LDO1",
@@ -112,6 +114,7 @@ static const struct regulator_desc isl9305_regulators[] = {
 		.enable_mask =	ISL9305_LDO1_EN,
 		.supply_name =	"VINLDO1",
 		.ops =		&isl9305_ops,
+		.owner =	THIS_MODULE,
 	},
 	[ISL9305_LDO2] = {
 		.name =		"LDO2",
@@ -126,6 +129,7 @@ static const struct regulator_desc isl9305_regulators[] = {
 		.enable_mask =	ISL9305_LDO2_EN,
 		.supply_name =	"VINLDO2",
 		.ops =		&isl9305_ops,
+		.owner =	THIS_MODULE,
 	},
 };
 
diff --git a/drivers/regulator/lm363x-regulator.c b/drivers/regulator/lm363x-regulator.c
index b615a413ca9f..bbedb08d257b 100644
--- a/drivers/regulator/lm363x-regulator.c
+++ b/drivers/regulator/lm363x-regulator.c
@@ -227,9 +227,11 @@ static struct gpio_desc *lm363x_regulator_of_get_enable_gpio(struct device *dev,
 	 */
 	switch (id) {
 	case LM3632_LDO_POS:
-		return devm_gpiod_get_index_optional(dev, "enable", 0, GPIOD_OUT_LOW);
+		return devm_gpiod_get_index_optional(dev, "enable", 0,
+				GPIOD_OUT_LOW | GPIOD_FLAGS_BIT_NONEXCLUSIVE);
 	case LM3632_LDO_NEG:
-		return devm_gpiod_get_index_optional(dev, "enable", 1, GPIOD_OUT_LOW);
+		return devm_gpiod_get_index_optional(dev, "enable", 1,
+				GPIOD_OUT_LOW | GPIOD_FLAGS_BIT_NONEXCLUSIVE);
 	default:
 		return NULL;
 	}
diff --git a/drivers/regulator/lochnagar-regulator.c b/drivers/regulator/lochnagar-regulator.c
new file mode 100644
index 000000000000..2b5073b9ff86
--- /dev/null
+++ b/drivers/regulator/lochnagar-regulator.c
@@ -0,0 +1,254 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Lochnagar regulator driver
+//
+// Copyright (c) 2017-2018 Cirrus Logic, Inc. and
+//                         Cirrus Logic International Semiconductor Ltd.
+//
+// Author: Charles Keepax <ckeepax@opensource.cirrus.com>
+
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+
+#include <linux/mfd/lochnagar.h>
+
+static const struct regulator_ops lochnagar_micvdd_ops = {
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+
+	.list_voltage = regulator_list_voltage_linear_range,
+	.map_voltage = regulator_map_voltage_linear_range,
+
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+};
+
+static const struct regulator_linear_range lochnagar_micvdd_ranges[] = {
+	REGULATOR_LINEAR_RANGE(1000000, 0,    0xC, 50000),
+	REGULATOR_LINEAR_RANGE(1700000, 0xD, 0x1F, 100000),
+};
+
+static int lochnagar_micbias_enable(struct regulator_dev *rdev)
+{
+	struct lochnagar *lochnagar = rdev_get_drvdata(rdev);
+	int ret;
+
+	mutex_lock(&lochnagar->analogue_config_lock);
+
+	ret = regulator_enable_regmap(rdev);
+	if (ret < 0)
+		goto err;
+
+	ret = lochnagar_update_config(lochnagar);
+
+err:
+	mutex_unlock(&lochnagar->analogue_config_lock);
+
+	return ret;
+}
+
+static int lochnagar_micbias_disable(struct regulator_dev *rdev)
+{
+	struct lochnagar *lochnagar = rdev_get_drvdata(rdev);
+	int ret;
+
+	mutex_lock(&lochnagar->analogue_config_lock);
+
+	ret = regulator_disable_regmap(rdev);
+	if (ret < 0)
+		goto err;
+
+	ret = lochnagar_update_config(lochnagar);
+
+err:
+	mutex_unlock(&lochnagar->analogue_config_lock);
+
+	return ret;
+}
+
+static const struct regulator_ops lochnagar_micbias_ops = {
+	.enable = lochnagar_micbias_enable,
+	.disable = lochnagar_micbias_disable,
+	.is_enabled = regulator_is_enabled_regmap,
+};
+
+static const struct regulator_ops lochnagar_vddcore_ops = {
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+
+	.list_voltage = regulator_list_voltage_linear_range,
+	.map_voltage = regulator_map_voltage_linear_range,
+
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+};
+
+static const struct regulator_linear_range lochnagar_vddcore_ranges[] = {
+	REGULATOR_LINEAR_RANGE(600000, 0x8, 0x41, 12500),
+};
+
+enum lochnagar_regulators {
+	LOCHNAGAR_MICVDD,
+	LOCHNAGAR_MIC1VDD,
+	LOCHNAGAR_MIC2VDD,
+	LOCHNAGAR_VDDCORE,
+};
+
+static int lochnagar_micbias_of_parse(struct device_node *np,
+				      const struct regulator_desc *desc,
+				      struct regulator_config *config)
+{
+	struct lochnagar *lochnagar = config->driver_data;
+	int shift = (desc->id - LOCHNAGAR_MIC1VDD) *
+		    LOCHNAGAR2_P2_MICBIAS_SRC_SHIFT;
+	int mask = LOCHNAGAR2_P1_MICBIAS_SRC_MASK << shift;
+	unsigned int val;
+	int ret;
+
+	ret = of_property_read_u32(np, "cirrus,micbias-input", &val);
+	if (ret >= 0) {
+		mutex_lock(&lochnagar->analogue_config_lock);
+		ret = regmap_update_bits(lochnagar->regmap,
+					 LOCHNAGAR2_ANALOGUE_PATH_CTRL2,
+					 mask, val << shift);
+		mutex_unlock(&lochnagar->analogue_config_lock);
+		if (ret < 0) {
+			dev_err(lochnagar->dev,
+				"Failed to update micbias source: %d\n", ret);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static const struct regulator_desc lochnagar_regulators[] = {
+	[LOCHNAGAR_MICVDD] = {
+		.name = "MICVDD",
+		.supply_name = "SYSVDD",
+		.type = REGULATOR_VOLTAGE,
+		.n_voltages = 32,
+		.ops = &lochnagar_micvdd_ops,
+
+		.id = LOCHNAGAR_MICVDD,
+		.of_match = of_match_ptr("MICVDD"),
+
+		.enable_reg = LOCHNAGAR2_MICVDD_CTRL1,
+		.enable_mask = LOCHNAGAR2_MICVDD_REG_ENA_MASK,
+		.vsel_reg = LOCHNAGAR2_MICVDD_CTRL2,
+		.vsel_mask = LOCHNAGAR2_MICVDD_VSEL_MASK,
+
+		.linear_ranges = lochnagar_micvdd_ranges,
+		.n_linear_ranges = ARRAY_SIZE(lochnagar_micvdd_ranges),
+
+		.enable_time = 3000,
+		.ramp_delay = 1000,
+
+		.owner = THIS_MODULE,
+	},
+	[LOCHNAGAR_MIC1VDD] = {
+		.name = "MIC1VDD",
+		.supply_name = "MICBIAS1",
+		.type = REGULATOR_VOLTAGE,
+		.ops = &lochnagar_micbias_ops,
+
+		.id = LOCHNAGAR_MIC1VDD,
+		.of_match = of_match_ptr("MIC1VDD"),
+		.of_parse_cb = lochnagar_micbias_of_parse,
+
+		.enable_reg = LOCHNAGAR2_ANALOGUE_PATH_CTRL2,
+		.enable_mask = LOCHNAGAR2_P1_INPUT_BIAS_ENA_MASK,
+
+		.owner = THIS_MODULE,
+	},
+	[LOCHNAGAR_MIC2VDD] = {
+		.name = "MIC2VDD",
+		.supply_name = "MICBIAS2",
+		.type = REGULATOR_VOLTAGE,
+		.ops = &lochnagar_micbias_ops,
+
+		.id = LOCHNAGAR_MIC2VDD,
+		.of_match = of_match_ptr("MIC2VDD"),
+		.of_parse_cb = lochnagar_micbias_of_parse,
+
+		.enable_reg = LOCHNAGAR2_ANALOGUE_PATH_CTRL2,
+		.enable_mask = LOCHNAGAR2_P2_INPUT_BIAS_ENA_MASK,
+
+		.owner = THIS_MODULE,
+	},
+	[LOCHNAGAR_VDDCORE] = {
+		.name = "VDDCORE",
+		.supply_name = "SYSVDD",
+		.type = REGULATOR_VOLTAGE,
+		.n_voltages = 57,
+		.ops = &lochnagar_vddcore_ops,
+
+		.id = LOCHNAGAR_VDDCORE,
+		.of_match = of_match_ptr("VDDCORE"),
+
+		.enable_reg = LOCHNAGAR2_VDDCORE_CDC_CTRL1,
+		.enable_mask = LOCHNAGAR2_VDDCORE_CDC_REG_ENA_MASK,
+		.vsel_reg = LOCHNAGAR2_VDDCORE_CDC_CTRL2,
+		.vsel_mask = LOCHNAGAR2_VDDCORE_CDC_VSEL_MASK,
+
+		.linear_ranges = lochnagar_vddcore_ranges,
+		.n_linear_ranges = ARRAY_SIZE(lochnagar_vddcore_ranges),
+
+		.enable_time = 3000,
+		.ramp_delay = 1000,
+
+		.owner = THIS_MODULE,
+	},
+};
+
+static int lochnagar_regulator_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct lochnagar *lochnagar = dev_get_drvdata(dev->parent);
+	struct regulator_config config = { };
+	struct regulator_dev *rdev;
+	int ret, i;
+
+	config.dev = lochnagar->dev;
+	config.regmap = lochnagar->regmap;
+	config.driver_data = lochnagar;
+
+	for (i = 0; i < ARRAY_SIZE(lochnagar_regulators); i++) {
+		const struct regulator_desc *desc = &lochnagar_regulators[i];
+
+		rdev = devm_regulator_register(dev, desc, &config);
+		if (IS_ERR(rdev)) {
+			ret = PTR_ERR(rdev);
+			dev_err(dev, "Failed to register %s regulator: %d\n",
+				desc->name, ret);
+			return ret;
+		}
+	}
+
+	return 0;
+}
+
+static struct platform_driver lochnagar_regulator_driver = {
+	.driver = {
+		.name = "lochnagar-regulator",
+	},
+
+	.probe = lochnagar_regulator_probe,
+};
+module_platform_driver(lochnagar_regulator_driver);
+
+MODULE_AUTHOR("Charles Keepax <ckeepax@opensource.cirrus.com>");
+MODULE_DESCRIPTION("Regulator driver for Cirrus Logic Lochnagar Board");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:lochnagar-regulator");
diff --git a/drivers/regulator/lp8788-ldo.c b/drivers/regulator/lp8788-ldo.c
index f2347474a106..553b4790050f 100644
--- a/drivers/regulator/lp8788-ldo.c
+++ b/drivers/regulator/lp8788-ldo.c
@@ -503,9 +503,10 @@ static int lp8788_config_ldo_enable_mode(struct platform_device *pdev,
 
 	/* FIXME: check default mode for GPIO here: high or low? */
 	ldo->ena_gpiod = devm_gpiod_get_index_optional(&pdev->dev,
-						       "enable",
-						       enable_id,
-						       GPIOD_OUT_HIGH);
+					       "enable",
+					       enable_id,
+					       GPIOD_OUT_HIGH |
+					       GPIOD_FLAGS_BIT_NONEXCLUSIVE);
 	if (IS_ERR(ldo->ena_gpiod))
 		return PTR_ERR(ldo->ena_gpiod);
 
diff --git a/drivers/regulator/max8952.c b/drivers/regulator/max8952.c
index f1e77ed5dfec..6c39fff73b8a 100644
--- a/drivers/regulator/max8952.c
+++ b/drivers/regulator/max8952.c
@@ -230,6 +230,7 @@ static int max8952_pmic_probe(struct i2c_client *client,
 		gflags = GPIOD_OUT_HIGH;
 	else
 		gflags = GPIOD_OUT_LOW;
+	gflags |= GPIOD_FLAGS_BIT_NONEXCLUSIVE;
 	gpiod = devm_gpiod_get_optional(&client->dev,
 					"max8952,en",
 					gflags);
diff --git a/drivers/regulator/max8973-regulator.c b/drivers/regulator/max8973-regulator.c
index 7cd493ec6315..e7a58b509032 100644
--- a/drivers/regulator/max8973-regulator.c
+++ b/drivers/regulator/max8973-regulator.c
@@ -758,6 +758,7 @@ static int max8973_probe(struct i2c_client *client,
 			gflags = GPIOD_OUT_HIGH;
 		else
 			gflags = GPIOD_OUT_LOW;
+		gflags |= GPIOD_FLAGS_BIT_NONEXCLUSIVE;
 		gpiod = devm_gpiod_get_optional(&client->dev,
 						"maxim,enable",
 						gflags);
diff --git a/drivers/regulator/max8997-regulator.c b/drivers/regulator/max8997-regulator.c
index ad0c806b0737..3bf5ddfaaea8 100644
--- a/drivers/regulator/max8997-regulator.c
+++ b/drivers/regulator/max8997-regulator.c
@@ -929,8 +929,8 @@ static int max8997_pmic_dt_parse_pdata(struct platform_device *pdev,
 				break;
 
 		if (i == ARRAY_SIZE(regulators)) {
-			dev_warn(&pdev->dev, "don't know how to configure regulator %s\n",
-				 reg_np->name);
+			dev_warn(&pdev->dev, "don't know how to configure regulator %pOFn\n",
+				 reg_np);
 			continue;
 		}
 
diff --git a/drivers/regulator/mc13xxx-regulator-core.c b/drivers/regulator/mc13xxx-regulator-core.c
index da4fb9824757..65eb1e0350cf 100644
--- a/drivers/regulator/mc13xxx-regulator-core.c
+++ b/drivers/regulator/mc13xxx-regulator-core.c
@@ -203,7 +203,7 @@ struct mc13xxx_regulator_init_data *mc13xxx_parse_regulators_dt(
 
 		if (!found)
 			dev_warn(&pdev->dev,
-				 "Unknown regulator: %s\n", child->name);
+				 "Unknown regulator: %pOFn\n", child);
 	}
 	of_node_put(parent);
 
diff --git a/drivers/regulator/of_regulator.c b/drivers/regulator/of_regulator.c
index 210fc20f7de7..c4223b3e0dff 100644
--- a/drivers/regulator/of_regulator.c
+++ b/drivers/regulator/of_regulator.c
@@ -95,8 +95,8 @@ static void of_get_regulation_constraints(struct device_node *np,
 	if (!ret)
 		constraints->settling_time_up = pval;
 	if (constraints->settling_time_up && constraints->settling_time) {
-		pr_warn("%s: ambiguous configuration for settling time, ignoring 'regulator-settling-time-up-us'\n",
-			np->name);
+		pr_warn("%pOFn: ambiguous configuration for settling time, ignoring 'regulator-settling-time-up-us'\n",
+			np);
 		constraints->settling_time_up = 0;
 	}
 
@@ -105,8 +105,8 @@ static void of_get_regulation_constraints(struct device_node *np,
 	if (!ret)
 		constraints->settling_time_down = pval;
 	if (constraints->settling_time_down && constraints->settling_time) {
-		pr_warn("%s: ambiguous configuration for settling time, ignoring 'regulator-settling-time-down-us'\n",
-			np->name);
+		pr_warn("%pOFn: ambiguous configuration for settling time, ignoring 'regulator-settling-time-down-us'\n",
+			np);
 		constraints->settling_time_down = 0;
 	}
 
@@ -127,12 +127,12 @@ static void of_get_regulation_constraints(struct device_node *np,
 		if (desc && desc->of_map_mode) {
 			mode = desc->of_map_mode(pval);
 			if (mode == REGULATOR_MODE_INVALID)
-				pr_err("%s: invalid mode %u\n", np->name, pval);
+				pr_err("%pOFn: invalid mode %u\n", np, pval);
 			else
 				constraints->initial_mode = mode;
 		} else {
-			pr_warn("%s: mapping for mode %d not defined\n",
-				np->name, pval);
+			pr_warn("%pOFn: mapping for mode %d not defined\n",
+				np, pval);
 		}
 	}
 
@@ -144,14 +144,14 @@ static void of_get_regulation_constraints(struct device_node *np,
 				ret = of_property_read_u32_index(np,
 					"regulator-allowed-modes", i, &pval);
 				if (ret) {
-					pr_err("%s: couldn't read allowed modes index %d, ret=%d\n",
-						np->name, i, ret);
+					pr_err("%pOFn: couldn't read allowed modes index %d, ret=%d\n",
+						np, i, ret);
 					break;
 				}
 				mode = desc->of_map_mode(pval);
 				if (mode == REGULATOR_MODE_INVALID)
-					pr_err("%s: invalid regulator-allowed-modes element %u\n",
-						np->name, pval);
+					pr_err("%pOFn: invalid regulator-allowed-modes element %u\n",
+						np, pval);
 				else
 					constraints->valid_modes_mask |= mode;
 			}
@@ -159,7 +159,7 @@ static void of_get_regulation_constraints(struct device_node *np,
 				constraints->valid_ops_mask
 					|= REGULATOR_CHANGE_MODE;
 		} else {
-			pr_warn("%s: mode mapping not defined\n", np->name);
+			pr_warn("%pOFn: mode mapping not defined\n", np);
 		}
 	}
 
@@ -197,13 +197,13 @@ static void of_get_regulation_constraints(struct device_node *np,
 			if (desc && desc->of_map_mode) {
 				mode = desc->of_map_mode(pval);
 				if (mode == REGULATOR_MODE_INVALID)
-					pr_err("%s: invalid mode %u\n",
-					       np->name, pval);
+					pr_err("%pOFn: invalid mode %u\n",
+					       np, pval);
 				else
 					suspend_state->mode = mode;
 			} else {
-				pr_warn("%s: mapping for mode %d not defined\n",
-					np->name, pval);
+				pr_warn("%pOFn: mapping for mode %d not defined\n",
+					np, pval);
 			}
 		}
 
@@ -349,8 +349,8 @@ int of_regulator_match(struct device *dev, struct device_node *node,
 							   match->desc);
 			if (!match->init_data) {
 				dev_err(dev,
-					"failed to parse DT for regulator %s\n",
-					child->name);
+					"failed to parse DT for regulator %pOFn\n",
+					child);
 				of_node_put(child);
 				return -EINVAL;
 			}
@@ -399,16 +399,16 @@ struct regulator_init_data *regulator_of_get_init_data(struct device *dev,
 		init_data = of_get_regulator_init_data(dev, child, desc);
 		if (!init_data) {
 			dev_err(dev,
-				"failed to parse DT for regulator %s\n",
-				child->name);
+				"failed to parse DT for regulator %pOFn\n",
+				child);
 			break;
 		}
 
 		if (desc->of_parse_cb) {
 			if (desc->of_parse_cb(child, desc, config)) {
 				dev_err(dev,
-					"driver callback failed to parse DT for regulator %s\n",
-					child->name);
+					"driver callback failed to parse DT for regulator %pOFn\n",
+					child);
 				init_data = NULL;
 				break;
 			}
diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c
index 31c3a236120a..dd41a9bb3f5c 100644
--- a/drivers/regulator/pfuze100-regulator.c
+++ b/drivers/regulator/pfuze100-regulator.c
@@ -31,11 +31,17 @@
 
 #define PFUZE100_COINVOL	0x1a
 #define PFUZE100_SW1ABVOL	0x20
+#define PFUZE100_SW1ABMODE	0x23
 #define PFUZE100_SW1CVOL	0x2e
+#define PFUZE100_SW1CMODE	0x31
 #define PFUZE100_SW2VOL		0x35
+#define PFUZE100_SW2MODE	0x38
 #define PFUZE100_SW3AVOL	0x3c
+#define PFUZE100_SW3AMODE	0x3f
 #define PFUZE100_SW3BVOL	0x43
+#define PFUZE100_SW3BMODE	0x46
 #define PFUZE100_SW4VOL		0x4a
+#define PFUZE100_SW4MODE	0x4d
 #define PFUZE100_SWBSTCON1	0x66
 #define PFUZE100_VREFDDRCON	0x6a
 #define PFUZE100_VSNVSVOL	0x6b
@@ -46,6 +52,13 @@
 #define PFUZE100_VGEN5VOL	0x70
 #define PFUZE100_VGEN6VOL	0x71
 
+#define PFUZE100_SWxMODE_MASK	0xf
+#define PFUZE100_SWxMODE_APS_APS	0x8
+#define PFUZE100_SWxMODE_APS_OFF	0x4
+
+#define PFUZE100_VGENxLPWR	BIT(6)
+#define PFUZE100_VGENxSTBY	BIT(5)
+
 enum chips { PFUZE100, PFUZE200, PFUZE3000 = 3, PFUZE3001 = 0x31, };
 
 struct pfuze_regulator {
@@ -559,6 +572,69 @@ static inline struct device_node *match_of_node(int index)
 }
 #endif
 
+static struct pfuze_chip *syspm_pfuze_chip;
+
+static void pfuze_power_off_prepare(void)
+{
+	dev_info(syspm_pfuze_chip->dev, "Configure standby mode for power off");
+
+	/* Switch from default mode: APS/APS to APS/Off */
+	regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_SW1ABMODE,
+			   PFUZE100_SWxMODE_MASK, PFUZE100_SWxMODE_APS_OFF);
+	regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_SW1CMODE,
+			   PFUZE100_SWxMODE_MASK, PFUZE100_SWxMODE_APS_OFF);
+	regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_SW2MODE,
+			   PFUZE100_SWxMODE_MASK, PFUZE100_SWxMODE_APS_OFF);
+	regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_SW3AMODE,
+			   PFUZE100_SWxMODE_MASK, PFUZE100_SWxMODE_APS_OFF);
+	regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_SW3BMODE,
+			   PFUZE100_SWxMODE_MASK, PFUZE100_SWxMODE_APS_OFF);
+	regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_SW4MODE,
+			   PFUZE100_SWxMODE_MASK, PFUZE100_SWxMODE_APS_OFF);
+
+	regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_VGEN1VOL,
+			   PFUZE100_VGENxLPWR | PFUZE100_VGENxSTBY,
+			   PFUZE100_VGENxSTBY);
+	regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_VGEN2VOL,
+			   PFUZE100_VGENxLPWR | PFUZE100_VGENxSTBY,
+			   PFUZE100_VGENxSTBY);
+	regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_VGEN3VOL,
+			   PFUZE100_VGENxLPWR | PFUZE100_VGENxSTBY,
+			   PFUZE100_VGENxSTBY);
+	regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_VGEN4VOL,
+			   PFUZE100_VGENxLPWR | PFUZE100_VGENxSTBY,
+			   PFUZE100_VGENxSTBY);
+	regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_VGEN5VOL,
+			   PFUZE100_VGENxLPWR | PFUZE100_VGENxSTBY,
+			   PFUZE100_VGENxSTBY);
+	regmap_update_bits(syspm_pfuze_chip->regmap, PFUZE100_VGEN6VOL,
+			   PFUZE100_VGENxLPWR | PFUZE100_VGENxSTBY,
+			   PFUZE100_VGENxSTBY);
+}
+
+static int pfuze_power_off_prepare_init(struct pfuze_chip *pfuze_chip)
+{
+	if (pfuze_chip->chip_id != PFUZE100) {
+		dev_warn(pfuze_chip->dev, "Requested pm_power_off_prepare handler for not supported chip\n");
+		return -ENODEV;
+	}
+
+	if (pm_power_off_prepare) {
+		dev_warn(pfuze_chip->dev, "pm_power_off_prepare is already registered.\n");
+		return -EBUSY;
+	}
+
+	if (syspm_pfuze_chip) {
+		dev_warn(pfuze_chip->dev, "syspm_pfuze_chip is already set.\n");
+		return -EBUSY;
+	}
+
+	syspm_pfuze_chip = pfuze_chip;
+	pm_power_off_prepare = pfuze_power_off_prepare;
+
+	return 0;
+}
+
 static int pfuze_identify(struct pfuze_chip *pfuze_chip)
 {
 	unsigned int value;
@@ -753,6 +829,20 @@ static int pfuze100_regulator_probe(struct i2c_client *client,
 		}
 	}
 
+	if (of_property_read_bool(client->dev.of_node,
+				  "fsl,pmic-stby-poweroff"))
+		return pfuze_power_off_prepare_init(pfuze_chip);
+
+	return 0;
+}
+
+static int pfuze100_regulator_remove(struct i2c_client *client)
+{
+	if (syspm_pfuze_chip) {
+		syspm_pfuze_chip = NULL;
+		pm_power_off_prepare = NULL;
+	}
+
 	return 0;
 }
 
@@ -763,6 +853,7 @@ static struct i2c_driver pfuze_driver = {
 		.of_match_table = pfuze_dt_ids,
 	},
 	.probe = pfuze100_regulator_probe,
+	.remove = pfuze100_regulator_remove,
 };
 module_i2c_driver(pfuze_driver);
 
diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c
index 9f27daebd8c8..39ccf53fdeb3 100644
--- a/drivers/regulator/qcom-rpmh-regulator.c
+++ b/drivers/regulator/qcom-rpmh-regulator.c
@@ -414,7 +414,7 @@ static int rpmh_regulator_init_vreg(struct rpmh_vreg *vreg, struct device *dev,
 			break;
 
 	if (!rpmh_data->name) {
-		dev_err(dev, "Unknown regulator %s\n", node->name);
+		dev_err(dev, "Unknown regulator %pOFn\n", node);
 		return -EINVAL;
 	}
 
@@ -423,8 +423,8 @@ static int rpmh_regulator_init_vreg(struct rpmh_vreg *vreg, struct device *dev,
 
 	vreg->addr = cmd_db_read_addr(rpmh_resource_name);
 	if (!vreg->addr) {
-		dev_err(dev, "%s: could not find RPMh address for resource %s\n",
-			node->name, rpmh_resource_name);
+		dev_err(dev, "%pOFn: could not find RPMh address for resource %s\n",
+			node, rpmh_resource_name);
 		return -ENODEV;
 	}
 
@@ -469,13 +469,13 @@ static int rpmh_regulator_init_vreg(struct rpmh_vreg *vreg, struct device *dev,
 	rdev = devm_regulator_register(dev, &vreg->rdesc, &reg_config);
 	if (IS_ERR(rdev)) {
 		ret = PTR_ERR(rdev);
-		dev_err(dev, "%s: devm_regulator_register() failed, ret=%d\n",
-			node->name, ret);
+		dev_err(dev, "%pOFn: devm_regulator_register() failed, ret=%d\n",
+			node, ret);
 		return ret;
 	}
 
-	dev_dbg(dev, "%s regulator registered for RPMh resource %s @ 0x%05X\n",
-		node->name, rpmh_resource_name, vreg->addr);
+	dev_dbg(dev, "%pOFn regulator registered for RPMh resource %s @ 0x%05X\n",
+		node, rpmh_resource_name, vreg->addr);
 
 	return 0;
 }
@@ -504,6 +504,7 @@ static unsigned int rpmh_regulator_pmic4_ldo_of_map_mode(unsigned int rpmh_mode)
 		break;
 	default:
 		mode = REGULATOR_MODE_INVALID;
+		break;
 	}
 
 	return mode;
@@ -537,6 +538,7 @@ rpmh_regulator_pmic4_smps_of_map_mode(unsigned int rpmh_mode)
 		break;
 	default:
 		mode = REGULATOR_MODE_INVALID;
+		break;
 	}
 
 	return mode;
@@ -566,6 +568,7 @@ static unsigned int rpmh_regulator_pmic4_bob_of_map_mode(unsigned int rpmh_mode)
 		break;
 	default:
 		mode = REGULATOR_MODE_INVALID;
+		break;
 	}
 
 	return mode;
diff --git a/drivers/regulator/qcom_smd-regulator.c b/drivers/regulator/qcom_smd-regulator.c
index fe2fb36803e0..f5bca77d67c1 100644
--- a/drivers/regulator/qcom_smd-regulator.c
+++ b/drivers/regulator/qcom_smd-regulator.c
@@ -420,6 +420,60 @@ static const struct regulator_desc pmi8998_bob = {
 	.ops = &rpm_bob_ops,
 };
 
+static const struct regulator_desc pms405_hfsmps3 = {
+	.linear_ranges = (struct regulator_linear_range[]) {
+		REGULATOR_LINEAR_RANGE(320000, 0, 215, 8000),
+	},
+	.n_linear_ranges = 1,
+	.n_voltages = 216,
+	.ops = &rpm_smps_ldo_ops,
+};
+
+static const struct regulator_desc pms405_nldo300 = {
+	.linear_ranges = (struct regulator_linear_range[]) {
+		REGULATOR_LINEAR_RANGE(312000, 0, 127, 8000),
+	},
+	.n_linear_ranges = 1,
+	.n_voltages = 128,
+	.ops = &rpm_smps_ldo_ops,
+};
+
+static const struct regulator_desc pms405_nldo1200 = {
+	.linear_ranges = (struct regulator_linear_range[]) {
+		REGULATOR_LINEAR_RANGE(312000, 0, 127, 8000),
+	},
+	.n_linear_ranges = 1,
+	.n_voltages = 128,
+	.ops = &rpm_smps_ldo_ops,
+};
+
+static const struct regulator_desc pms405_pldo50 = {
+	.linear_ranges = (struct regulator_linear_range[]) {
+		REGULATOR_LINEAR_RANGE(1664000, 0, 128, 16000),
+	},
+	.n_linear_ranges = 1,
+	.n_voltages = 129,
+	.ops = &rpm_smps_ldo_ops,
+};
+
+static const struct regulator_desc pms405_pldo150 = {
+	.linear_ranges = (struct regulator_linear_range[]) {
+		REGULATOR_LINEAR_RANGE(1664000, 0, 128, 16000),
+	},
+	.n_linear_ranges = 1,
+	.n_voltages = 129,
+	.ops = &rpm_smps_ldo_ops,
+};
+
+static const struct regulator_desc pms405_pldo600 = {
+	.linear_ranges = (struct regulator_linear_range[]) {
+		REGULATOR_LINEAR_RANGE(1256000, 0, 98, 8000),
+	},
+	.n_linear_ranges = 1,
+	.n_voltages = 99,
+	.ops = &rpm_smps_ldo_ops,
+};
+
 struct rpm_regulator_data {
 	const char *name;
 	u32 type;
@@ -661,6 +715,28 @@ static const struct rpm_regulator_data rpm_pmi8998_regulators[] = {
 	{}
 };
 
+static const struct rpm_regulator_data rpm_pms405_regulators[] = {
+	{ "s1", QCOM_SMD_RPM_SMPA, 1, &pms405_hfsmps3, "vdd_s1" },
+	{ "s2", QCOM_SMD_RPM_SMPA, 2, &pms405_hfsmps3, "vdd_s2" },
+	{ "s3", QCOM_SMD_RPM_SMPA, 3, &pms405_hfsmps3, "vdd_s3" },
+	{ "s4", QCOM_SMD_RPM_SMPA, 4, &pms405_hfsmps3, "vdd_s4" },
+	{ "s5", QCOM_SMD_RPM_SMPA, 5, &pms405_hfsmps3, "vdd_s5" },
+	{ "l1", QCOM_SMD_RPM_LDOA, 1, &pms405_nldo1200, "vdd_l1_l2" },
+	{ "l2", QCOM_SMD_RPM_LDOA, 2, &pms405_nldo1200, "vdd_l1_l2" },
+	{ "l3", QCOM_SMD_RPM_LDOA, 3, &pms405_nldo1200, "vdd_l3_l8" },
+	{ "l4", QCOM_SMD_RPM_LDOA, 4, &pms405_nldo300, "vdd_l4" },
+	{ "l5", QCOM_SMD_RPM_LDOA, 5, &pms405_pldo600, "vdd_l5_l6" },
+	{ "l6", QCOM_SMD_RPM_LDOA, 6, &pms405_pldo600, "vdd_l5_l6" },
+	{ "l7", QCOM_SMD_RPM_LDOA, 7, &pms405_pldo150, "vdd_l7" },
+	{ "l8", QCOM_SMD_RPM_LDOA, 8, &pms405_nldo1200, "vdd_l3_l8" },
+	{ "l9", QCOM_SMD_RPM_LDOA, 9, &pms405_nldo1200, "vdd_l9" },
+	{ "l10", QCOM_SMD_RPM_LDOA, 10, &pms405_pldo50, "vdd_l10_l11_l12_l13" },
+	{ "l11", QCOM_SMD_RPM_LDOA, 11, &pms405_pldo150, "vdd_l10_l11_l12_l13" },
+	{ "l12", QCOM_SMD_RPM_LDOA, 12, &pms405_pldo150, "vdd_l10_l11_l12_l13" },
+	{ "l13", QCOM_SMD_RPM_LDOA, 13, &pms405_pldo150, "vdd_l10_l11_l12_l13" },
+	{}
+};
+
 static const struct of_device_id rpm_of_match[] = {
 	{ .compatible = "qcom,rpm-pm8841-regulators", .data = &rpm_pm8841_regulators },
 	{ .compatible = "qcom,rpm-pm8916-regulators", .data = &rpm_pm8916_regulators },
@@ -669,6 +745,7 @@ static const struct of_device_id rpm_of_match[] = {
 	{ .compatible = "qcom,rpm-pm8998-regulators", .data = &rpm_pm8998_regulators },
 	{ .compatible = "qcom,rpm-pma8084-regulators", .data = &rpm_pma8084_regulators },
 	{ .compatible = "qcom,rpm-pmi8998-regulators", .data = &rpm_pmi8998_regulators },
+	{ .compatible = "qcom,rpm-pms405-regulators", .data = &rpm_pms405_regulators },
 	{}
 };
 MODULE_DEVICE_TABLE(of, rpm_of_match);
diff --git a/drivers/regulator/s5m8767.c b/drivers/regulator/s5m8767.c
index 667d16dc83ce..219b9afda0cb 100644
--- a/drivers/regulator/s5m8767.c
+++ b/drivers/regulator/s5m8767.c
@@ -447,15 +447,15 @@ static void s5m8767_regulator_config_ext_control(struct s5m8767_info *s5m8767,
 	}
 	if (mode != S5M8767_ENCTRL_USE_GPIO) {
 		dev_warn(s5m8767->dev,
-				"ext-control for %s: mismatched op_mode (%x), ignoring\n",
-				rdata->reg_node->name, mode);
+				"ext-control for %pOFn: mismatched op_mode (%x), ignoring\n",
+				rdata->reg_node, mode);
 		return;
 	}
 
 	if (!rdata->ext_control_gpiod) {
 		dev_warn(s5m8767->dev,
-				"ext-control for %s: GPIO not valid, ignoring\n",
-			 rdata->reg_node->name);
+				"ext-control for %pOFn: GPIO not valid, ignoring\n",
+			 rdata->reg_node);
 		return;
 	}
 
@@ -566,17 +566,18 @@ static int s5m8767_pmic_dt_parse_pdata(struct platform_device *pdev,
 
 		if (i == ARRAY_SIZE(regulators)) {
 			dev_warn(iodev->dev,
-			"don't know how to configure regulator %s\n",
-			reg_np->name);
+			"don't know how to configure regulator %pOFn\n",
+			reg_np);
 			continue;
 		}
 
-		rdata->ext_control_gpiod = devm_gpiod_get_from_of_node(&pdev->dev,
-								       reg_np,
-								       "s5m8767,pmic-ext-control-gpios",
-								       0,
-								       GPIOD_OUT_HIGH,
-								       "s5m8767");
+		rdata->ext_control_gpiod = devm_gpiod_get_from_of_node(
+			&pdev->dev,
+			reg_np,
+			"s5m8767,pmic-ext-control-gpios",
+			0,
+			GPIOD_OUT_HIGH | GPIOD_FLAGS_BIT_NONEXCLUSIVE,
+			"s5m8767");
 		if (IS_ERR(rdata->ext_control_gpiod))
 			return PTR_ERR(rdata->ext_control_gpiod);
 
diff --git a/drivers/regulator/stpmic1_regulator.c b/drivers/regulator/stpmic1_regulator.c
new file mode 100644
index 000000000000..e15634edb8ce
--- /dev/null
+++ b/drivers/regulator/stpmic1_regulator.c
@@ -0,0 +1,674 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) STMicroelectronics 2018
+// Author: Pascal Paillet <p.paillet@st.com> for STMicroelectronics.
+
+#include <linux/interrupt.h>
+#include <linux/mfd/stpmic1.h>
+#include <linux/module.h>
+#include <linux/of_irq.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+
+/**
+ * stpmic1 regulator description
+ * @desc: regulator framework description
+ * @mask_reset_reg: mask reset register address
+ * @mask_reset_mask: mask rank and mask reset register mask
+ * @icc_reg: icc register address
+ * @icc_mask: icc register mask
+ */
+struct stpmic1_regulator_cfg {
+	struct regulator_desc desc;
+	u8 mask_reset_reg;
+	u8 mask_reset_mask;
+	u8 icc_reg;
+	u8 icc_mask;
+};
+
+/**
+ * stpmic1 regulator data: this structure is used as driver data
+ * @regul_id: regulator id
+ * @reg_node: DT node of regulator (unused on non-DT platforms)
+ * @cfg: stpmic specific regulator description
+ * @mask_reset: mask_reset bit value
+ * @irq_curlim: current limit interrupt number
+ * @regmap: point to parent regmap structure
+ */
+struct stpmic1_regulator {
+	unsigned int regul_id;
+	struct device_node *reg_node;
+	struct stpmic1_regulator_cfg *cfg;
+	u8 mask_reset;
+	int irq_curlim;
+	struct regmap *regmap;
+};
+
+static int stpmic1_set_mode(struct regulator_dev *rdev, unsigned int mode);
+static unsigned int stpmic1_get_mode(struct regulator_dev *rdev);
+static int stpmic1_set_icc(struct regulator_dev *rdev);
+static int stpmic1_regulator_parse_dt(void *driver_data);
+static unsigned int stpmic1_map_mode(unsigned int mode);
+
+enum {
+	STPMIC1_BUCK1 = 0,
+	STPMIC1_BUCK2 = 1,
+	STPMIC1_BUCK3 = 2,
+	STPMIC1_BUCK4 = 3,
+	STPMIC1_LDO1 = 4,
+	STPMIC1_LDO2 = 5,
+	STPMIC1_LDO3 = 6,
+	STPMIC1_LDO4 = 7,
+	STPMIC1_LDO5 = 8,
+	STPMIC1_LDO6 = 9,
+	STPMIC1_VREF_DDR = 10,
+	STPMIC1_BOOST = 11,
+	STPMIC1_VBUS_OTG = 12,
+	STPMIC1_SW_OUT = 13,
+};
+
+/* Enable time worst case is 5000mV/(2250uV/uS) */
+#define PMIC_ENABLE_TIME_US 2200
+
+#define STPMIC1_BUCK_MODE_NORMAL 0
+#define STPMIC1_BUCK_MODE_LP BUCK_HPLP_ENABLE_MASK
+
+struct regulator_linear_range buck1_ranges[] = {
+	REGULATOR_LINEAR_RANGE(600000, 0, 30, 25000),
+	REGULATOR_LINEAR_RANGE(1350000, 31, 63, 0),
+};
+
+struct regulator_linear_range buck2_ranges[] = {
+	REGULATOR_LINEAR_RANGE(1000000, 0, 17, 0),
+	REGULATOR_LINEAR_RANGE(1050000, 18, 19, 0),
+	REGULATOR_LINEAR_RANGE(1100000, 20, 21, 0),
+	REGULATOR_LINEAR_RANGE(1150000, 22, 23, 0),
+	REGULATOR_LINEAR_RANGE(1200000, 24, 25, 0),
+	REGULATOR_LINEAR_RANGE(1250000, 26, 27, 0),
+	REGULATOR_LINEAR_RANGE(1300000, 28, 29, 0),
+	REGULATOR_LINEAR_RANGE(1350000, 30, 31, 0),
+	REGULATOR_LINEAR_RANGE(1400000, 32, 33, 0),
+	REGULATOR_LINEAR_RANGE(1450000, 34, 35, 0),
+	REGULATOR_LINEAR_RANGE(1500000, 36, 63, 0),
+};
+
+struct regulator_linear_range buck3_ranges[] = {
+	REGULATOR_LINEAR_RANGE(1000000, 0, 19, 0),
+	REGULATOR_LINEAR_RANGE(1100000, 20, 23, 0),
+	REGULATOR_LINEAR_RANGE(1200000, 24, 27, 0),
+	REGULATOR_LINEAR_RANGE(1300000, 28, 31, 0),
+	REGULATOR_LINEAR_RANGE(1400000, 32, 35, 0),
+	REGULATOR_LINEAR_RANGE(1500000, 36, 55, 100000),
+	REGULATOR_LINEAR_RANGE(3400000, 56, 63, 0),
+
+};
+
+struct regulator_linear_range buck4_ranges[] = {
+	REGULATOR_LINEAR_RANGE(600000, 0, 27, 25000),
+	REGULATOR_LINEAR_RANGE(1300000, 28, 29, 0),
+	REGULATOR_LINEAR_RANGE(1350000, 30, 31, 0),
+	REGULATOR_LINEAR_RANGE(1400000, 32, 33, 0),
+	REGULATOR_LINEAR_RANGE(1450000, 34, 35, 0),
+	REGULATOR_LINEAR_RANGE(1500000, 36, 60, 100000),
+	REGULATOR_LINEAR_RANGE(3900000, 61, 63, 0),
+
+};
+
+struct regulator_linear_range ldo1_ranges[] = {
+	REGULATOR_LINEAR_RANGE(1700000, 0, 7, 0),
+	REGULATOR_LINEAR_RANGE(1700000, 8, 24, 100000),
+	REGULATOR_LINEAR_RANGE(3300000, 25, 31, 0),
+
+};
+
+struct regulator_linear_range ldo2_ranges[] = {
+	REGULATOR_LINEAR_RANGE(1700000, 0, 7, 0),
+	REGULATOR_LINEAR_RANGE(1700000, 8, 24, 100000),
+	REGULATOR_LINEAR_RANGE(3300000, 25, 30, 0),
+
+};
+
+struct regulator_linear_range ldo3_ranges[] = {
+	REGULATOR_LINEAR_RANGE(1700000, 0, 7, 0),
+	REGULATOR_LINEAR_RANGE(1700000, 8, 24, 100000),
+	REGULATOR_LINEAR_RANGE(3300000, 25, 30, 0),
+	/* with index 31 LDO3 is in DDR mode */
+	REGULATOR_LINEAR_RANGE(500000, 31, 31, 0),
+};
+
+struct regulator_linear_range ldo5_ranges[] = {
+	REGULATOR_LINEAR_RANGE(1700000, 0, 7, 0),
+	REGULATOR_LINEAR_RANGE(1700000, 8, 30, 100000),
+	REGULATOR_LINEAR_RANGE(3900000, 31, 31, 0),
+};
+
+struct regulator_linear_range ldo6_ranges[] = {
+	REGULATOR_LINEAR_RANGE(900000, 0, 24, 100000),
+	REGULATOR_LINEAR_RANGE(3300000, 25, 31, 0),
+};
+
+static struct regulator_ops stpmic1_ldo_ops = {
+	.list_voltage = regulator_list_voltage_linear_range,
+	.map_voltage = regulator_map_voltage_linear_range,
+	.is_enabled = regulator_is_enabled_regmap,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.set_pull_down = regulator_set_pull_down_regmap,
+	.set_over_current_protection = stpmic1_set_icc,
+};
+
+static struct regulator_ops stpmic1_ldo3_ops = {
+	.list_voltage = regulator_list_voltage_linear_range,
+	.map_voltage = regulator_map_voltage_iterate,
+	.is_enabled = regulator_is_enabled_regmap,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.set_pull_down = regulator_set_pull_down_regmap,
+	.get_bypass = regulator_get_bypass_regmap,
+	.set_bypass = regulator_set_bypass_regmap,
+	.set_over_current_protection = stpmic1_set_icc,
+};
+
+static struct regulator_ops stpmic1_ldo4_fixed_regul_ops = {
+	.is_enabled = regulator_is_enabled_regmap,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.set_pull_down = regulator_set_pull_down_regmap,
+	.set_over_current_protection = stpmic1_set_icc,
+};
+
+static struct regulator_ops stpmic1_buck_ops = {
+	.list_voltage = regulator_list_voltage_linear_range,
+	.map_voltage = regulator_map_voltage_linear_range,
+	.is_enabled = regulator_is_enabled_regmap,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.set_pull_down = regulator_set_pull_down_regmap,
+	.set_mode = stpmic1_set_mode,
+	.get_mode = stpmic1_get_mode,
+	.set_over_current_protection = stpmic1_set_icc,
+};
+
+static struct regulator_ops stpmic1_vref_ddr_ops = {
+	.is_enabled = regulator_is_enabled_regmap,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.set_pull_down = regulator_set_pull_down_regmap,
+};
+
+static struct regulator_ops stpmic1_switch_regul_ops = {
+	.is_enabled = regulator_is_enabled_regmap,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.set_over_current_protection = stpmic1_set_icc,
+};
+
+#define REG_LDO(ids, base) { \
+	.name = #ids, \
+	.id = STPMIC1_##ids, \
+	.n_voltages = 32, \
+	.ops = &stpmic1_ldo_ops, \
+	.linear_ranges = base ## _ranges, \
+	.n_linear_ranges = ARRAY_SIZE(base ## _ranges), \
+	.type = REGULATOR_VOLTAGE, \
+	.owner = THIS_MODULE, \
+	.vsel_reg = ids##_ACTIVE_CR, \
+	.vsel_mask = LDO_VOLTAGE_MASK, \
+	.enable_reg = ids##_ACTIVE_CR, \
+	.enable_mask = LDO_ENABLE_MASK, \
+	.enable_val = 1, \
+	.disable_val = 0, \
+	.enable_time = PMIC_ENABLE_TIME_US, \
+	.pull_down_reg = ids##_PULL_DOWN_REG, \
+	.pull_down_mask = ids##_PULL_DOWN_MASK, \
+	.supply_name = #base, \
+}
+
+#define REG_LDO3(ids, base) { \
+	.name = #ids, \
+	.id = STPMIC1_##ids, \
+	.n_voltages = 32, \
+	.ops = &stpmic1_ldo3_ops, \
+	.linear_ranges = ldo3_ranges, \
+	.n_linear_ranges = ARRAY_SIZE(ldo3_ranges), \
+	.type = REGULATOR_VOLTAGE, \
+	.owner = THIS_MODULE, \
+	.vsel_reg = LDO3_ACTIVE_CR, \
+	.vsel_mask = LDO_VOLTAGE_MASK, \
+	.enable_reg = LDO3_ACTIVE_CR, \
+	.enable_mask = LDO_ENABLE_MASK, \
+	.enable_val = 1, \
+	.disable_val = 0, \
+	.enable_time = PMIC_ENABLE_TIME_US, \
+	.bypass_reg = LDO3_ACTIVE_CR, \
+	.bypass_mask = LDO_BYPASS_MASK, \
+	.bypass_val_on = LDO_BYPASS_MASK, \
+	.bypass_val_off = 0, \
+	.pull_down_reg = ids##_PULL_DOWN_REG, \
+	.pull_down_mask = ids##_PULL_DOWN_MASK, \
+	.supply_name = #base, \
+}
+
+#define REG_LDO4(ids, base) { \
+	.name = #ids, \
+	.id = STPMIC1_##ids, \
+	.n_voltages = 1, \
+	.ops = &stpmic1_ldo4_fixed_regul_ops, \
+	.type = REGULATOR_VOLTAGE, \
+	.owner = THIS_MODULE, \
+	.min_uV = 3300000, \
+	.fixed_uV = 3300000, \
+	.enable_reg = LDO4_ACTIVE_CR, \
+	.enable_mask = LDO_ENABLE_MASK, \
+	.enable_val = 1, \
+	.disable_val = 0, \
+	.enable_time = PMIC_ENABLE_TIME_US, \
+	.pull_down_reg = ids##_PULL_DOWN_REG, \
+	.pull_down_mask = ids##_PULL_DOWN_MASK, \
+	.supply_name = #base, \
+}
+
+#define REG_BUCK(ids, base) { \
+	.name = #ids, \
+	.id = STPMIC1_##ids, \
+	.ops = &stpmic1_buck_ops, \
+	.n_voltages = 64, \
+	.linear_ranges = base ## _ranges, \
+	.n_linear_ranges = ARRAY_SIZE(base ## _ranges), \
+	.type = REGULATOR_VOLTAGE, \
+	.owner = THIS_MODULE, \
+	.vsel_reg = ids##_ACTIVE_CR, \
+	.vsel_mask = BUCK_VOLTAGE_MASK, \
+	.enable_reg = ids##_ACTIVE_CR, \
+	.enable_mask = BUCK_ENABLE_MASK, \
+	.enable_val = 1, \
+	.disable_val = 0, \
+	.enable_time = PMIC_ENABLE_TIME_US, \
+	.of_map_mode = stpmic1_map_mode, \
+	.pull_down_reg = ids##_PULL_DOWN_REG, \
+	.pull_down_mask = ids##_PULL_DOWN_MASK, \
+	.supply_name = #base, \
+}
+
+#define REG_VREF_DDR(ids, base) { \
+	.name = #ids, \
+	.id = STPMIC1_##ids, \
+	.n_voltages = 1, \
+	.ops = &stpmic1_vref_ddr_ops, \
+	.type = REGULATOR_VOLTAGE, \
+	.owner = THIS_MODULE, \
+	.min_uV = 500000, \
+	.fixed_uV = 500000, \
+	.enable_reg = VREF_DDR_ACTIVE_CR, \
+	.enable_mask = BUCK_ENABLE_MASK, \
+	.enable_val = 1, \
+	.disable_val = 0, \
+	.enable_time = PMIC_ENABLE_TIME_US, \
+	.pull_down_reg = ids##_PULL_DOWN_REG, \
+	.pull_down_mask = ids##_PULL_DOWN_MASK, \
+	.supply_name = #base, \
+}
+
+#define REG_SWITCH(ids, base, reg, mask, val) { \
+	.name = #ids, \
+	.id = STPMIC1_##ids, \
+	.n_voltages = 1, \
+	.ops = &stpmic1_switch_regul_ops, \
+	.type = REGULATOR_VOLTAGE, \
+	.owner = THIS_MODULE, \
+	.min_uV = 0, \
+	.fixed_uV = 5000000, \
+	.enable_reg = (reg), \
+	.enable_mask = (mask), \
+	.enable_val = (val), \
+	.disable_val = 0, \
+	.enable_time = PMIC_ENABLE_TIME_US, \
+	.supply_name = #base, \
+}
+
+struct stpmic1_regulator_cfg stpmic1_regulator_cfgs[] = {
+	[STPMIC1_BUCK1] = {
+		.desc = REG_BUCK(BUCK1, buck1),
+		.icc_reg = BUCKS_ICCTO_CR,
+		.icc_mask = BIT(0),
+		.mask_reset_reg = BUCKS_MASK_RESET_CR,
+		.mask_reset_mask = BIT(0),
+	},
+	[STPMIC1_BUCK2] = {
+		.desc = REG_BUCK(BUCK2, buck2),
+		.icc_reg = BUCKS_ICCTO_CR,
+		.icc_mask = BIT(1),
+		.mask_reset_reg = BUCKS_MASK_RESET_CR,
+		.mask_reset_mask = BIT(1),
+	},
+	[STPMIC1_BUCK3] = {
+		.desc = REG_BUCK(BUCK3, buck3),
+		.icc_reg = BUCKS_ICCTO_CR,
+		.icc_mask = BIT(2),
+		.mask_reset_reg = BUCKS_MASK_RESET_CR,
+		.mask_reset_mask = BIT(2),
+	},
+	[STPMIC1_BUCK4] = {
+		.desc = REG_BUCK(BUCK4, buck4),
+		.icc_reg = BUCKS_ICCTO_CR,
+		.icc_mask = BIT(3),
+		.mask_reset_reg = BUCKS_MASK_RESET_CR,
+		.mask_reset_mask = BIT(3),
+	},
+	[STPMIC1_LDO1] = {
+		.desc = REG_LDO(LDO1, ldo1),
+		.icc_reg = LDOS_ICCTO_CR,
+		.icc_mask = BIT(0),
+		.mask_reset_reg = LDOS_MASK_RESET_CR,
+		.mask_reset_mask = BIT(0),
+	},
+	[STPMIC1_LDO2] = {
+		.desc = REG_LDO(LDO2, ldo2),
+		.icc_reg = LDOS_ICCTO_CR,
+		.icc_mask = BIT(1),
+		.mask_reset_reg = LDOS_MASK_RESET_CR,
+		.mask_reset_mask = BIT(1),
+	},
+	[STPMIC1_LDO3] = {
+		.desc = REG_LDO3(LDO3, ldo3),
+		.icc_reg = LDOS_ICCTO_CR,
+		.icc_mask = BIT(2),
+		.mask_reset_reg = LDOS_MASK_RESET_CR,
+		.mask_reset_mask = BIT(2),
+	},
+	[STPMIC1_LDO4] = {
+		.desc = REG_LDO4(LDO4, ldo4),
+		.icc_reg = LDOS_ICCTO_CR,
+		.icc_mask = BIT(3),
+		.mask_reset_reg = LDOS_MASK_RESET_CR,
+		.mask_reset_mask = BIT(3),
+	},
+	[STPMIC1_LDO5] = {
+		.desc = REG_LDO(LDO5, ldo5),
+		.icc_reg = LDOS_ICCTO_CR,
+		.icc_mask = BIT(4),
+		.mask_reset_reg = LDOS_MASK_RESET_CR,
+		.mask_reset_mask = BIT(4),
+	},
+	[STPMIC1_LDO6] = {
+		.desc = REG_LDO(LDO6, ldo6),
+		.icc_reg = LDOS_ICCTO_CR,
+		.icc_mask = BIT(5),
+		.mask_reset_reg = LDOS_MASK_RESET_CR,
+		.mask_reset_mask = BIT(5),
+	},
+	[STPMIC1_VREF_DDR] = {
+		.desc = REG_VREF_DDR(VREF_DDR, vref_ddr),
+		.mask_reset_reg = LDOS_MASK_RESET_CR,
+		.mask_reset_mask = BIT(6),
+	},
+	[STPMIC1_BOOST] = {
+		.desc = REG_SWITCH(BOOST, boost, BST_SW_CR,
+				   BOOST_ENABLED,
+				   BOOST_ENABLED),
+		.icc_reg = BUCKS_ICCTO_CR,
+		.icc_mask = BIT(6),
+	},
+	[STPMIC1_VBUS_OTG] = {
+		.desc = REG_SWITCH(VBUS_OTG, pwr_sw1, BST_SW_CR,
+				   USBSW_OTG_SWITCH_ENABLED,
+				   USBSW_OTG_SWITCH_ENABLED),
+		.icc_reg = BUCKS_ICCTO_CR,
+		.icc_mask = BIT(4),
+	},
+	[STPMIC1_SW_OUT] = {
+		.desc = REG_SWITCH(SW_OUT, pwr_sw2, BST_SW_CR,
+				   SWIN_SWOUT_ENABLED,
+				   SWIN_SWOUT_ENABLED),
+		.icc_reg = BUCKS_ICCTO_CR,
+		.icc_mask = BIT(5),
+	},
+};
+
+static unsigned int stpmic1_map_mode(unsigned int mode)
+{
+	switch (mode) {
+	case STPMIC1_BUCK_MODE_NORMAL:
+		return REGULATOR_MODE_NORMAL;
+	case STPMIC1_BUCK_MODE_LP:
+		return REGULATOR_MODE_STANDBY;
+	default:
+		return REGULATOR_MODE_INVALID;
+	}
+}
+
+static unsigned int stpmic1_get_mode(struct regulator_dev *rdev)
+{
+	int value;
+
+	regmap_read(rdev->regmap, rdev->desc->enable_reg, &value);
+
+	if (value & STPMIC1_BUCK_MODE_LP)
+		return REGULATOR_MODE_STANDBY;
+
+	return REGULATOR_MODE_NORMAL;
+}
+
+static int stpmic1_set_mode(struct regulator_dev *rdev, unsigned int mode)
+{
+	int value;
+
+	switch (mode) {
+	case REGULATOR_MODE_NORMAL:
+		value = STPMIC1_BUCK_MODE_NORMAL;
+		break;
+	case REGULATOR_MODE_STANDBY:
+		value = STPMIC1_BUCK_MODE_LP;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
+				  STPMIC1_BUCK_MODE_LP, value);
+}
+
+static int stpmic1_set_icc(struct regulator_dev *rdev)
+{
+	struct stpmic1_regulator *regul = rdev_get_drvdata(rdev);
+
+	/* enable switch off in case of over current */
+	return regmap_update_bits(regul->regmap, regul->cfg->icc_reg,
+				  regul->cfg->icc_mask, regul->cfg->icc_mask);
+}
+
+static irqreturn_t stpmic1_curlim_irq_handler(int irq, void *data)
+{
+	struct regulator_dev *rdev = (struct regulator_dev *)data;
+
+	mutex_lock(&rdev->mutex);
+
+	/* Send an overcurrent notification */
+	regulator_notifier_call_chain(rdev,
+				      REGULATOR_EVENT_OVER_CURRENT,
+				      NULL);
+
+	mutex_unlock(&rdev->mutex);
+
+	return IRQ_HANDLED;
+}
+
+static int stpmic1_regulator_init(struct platform_device *pdev,
+				  struct regulator_dev *rdev)
+{
+	struct stpmic1_regulator *regul = rdev_get_drvdata(rdev);
+	int ret = 0;
+
+	/* set mask reset */
+	if (regul->mask_reset && regul->cfg->mask_reset_reg != 0) {
+		ret = regmap_update_bits(regul->regmap,
+					 regul->cfg->mask_reset_reg,
+					 regul->cfg->mask_reset_mask,
+					 regul->cfg->mask_reset_mask);
+		if (ret) {
+			dev_err(&pdev->dev, "set mask reset failed\n");
+			return ret;
+		}
+	}
+
+	/* setup an irq handler for over-current detection */
+	if (regul->irq_curlim > 0) {
+		ret = devm_request_threaded_irq(&pdev->dev,
+						regul->irq_curlim, NULL,
+						stpmic1_curlim_irq_handler,
+						IRQF_ONESHOT | IRQF_SHARED,
+						pdev->name, rdev);
+		if (ret) {
+			dev_err(&pdev->dev, "Request IRQ failed\n");
+			return ret;
+		}
+	}
+	return 0;
+}
+
+#define MATCH(_name, _id) \
+	[STPMIC1_##_id] = { \
+		.name = #_name, \
+		.desc = &stpmic1_regulator_cfgs[STPMIC1_##_id].desc, \
+	}
+
+static struct of_regulator_match stpmic1_regulators_matches[] = {
+	MATCH(buck1, BUCK1),
+	MATCH(buck2, BUCK2),
+	MATCH(buck3, BUCK3),
+	MATCH(buck4, BUCK4),
+	MATCH(ldo1, LDO1),
+	MATCH(ldo2, LDO2),
+	MATCH(ldo3, LDO3),
+	MATCH(ldo4, LDO4),
+	MATCH(ldo5, LDO5),
+	MATCH(ldo6, LDO6),
+	MATCH(vref_ddr, VREF_DDR),
+	MATCH(boost, BOOST),
+	MATCH(pwr_sw1, VBUS_OTG),
+	MATCH(pwr_sw2, SW_OUT),
+};
+
+static int stpmic1_regulator_parse_dt(void *driver_data)
+{
+	struct stpmic1_regulator *regul =
+		(struct stpmic1_regulator *)driver_data;
+
+	if (!regul)
+		return -EINVAL;
+
+	if (of_get_property(regul->reg_node, "st,mask-reset", NULL))
+		regul->mask_reset = 1;
+
+	regul->irq_curlim = of_irq_get(regul->reg_node, 0);
+
+	return 0;
+}
+
+static struct
+regulator_dev *stpmic1_regulator_register(struct platform_device *pdev, int id,
+					  struct regulator_init_data *init_data,
+					  struct stpmic1_regulator *regul)
+{
+	struct stpmic1 *pmic_dev = dev_get_drvdata(pdev->dev.parent);
+	struct regulator_dev *rdev;
+	struct regulator_config config = {};
+
+	config.dev = &pdev->dev;
+	config.init_data = init_data;
+	config.of_node = stpmic1_regulators_matches[id].of_node;
+	config.regmap = pmic_dev->regmap;
+	config.driver_data = regul;
+
+	regul->regul_id = id;
+	regul->reg_node = config.of_node;
+	regul->cfg = &stpmic1_regulator_cfgs[id];
+	regul->regmap = pmic_dev->regmap;
+
+	rdev = devm_regulator_register(&pdev->dev, &regul->cfg->desc, &config);
+	if (IS_ERR(rdev)) {
+		dev_err(&pdev->dev, "failed to register %s regulator\n",
+			regul->cfg->desc.name);
+	}
+
+	return rdev;
+}
+
+static int stpmic1_regulator_probe(struct platform_device *pdev)
+{
+	struct regulator_dev *rdev;
+	struct stpmic1_regulator *regul;
+	struct regulator_init_data *init_data;
+	struct device_node *np;
+	int i, ret;
+
+	np = pdev->dev.of_node;
+
+	ret = of_regulator_match(&pdev->dev, np,
+				 stpmic1_regulators_matches,
+				 ARRAY_SIZE(stpmic1_regulators_matches));
+	if (ret < 0) {
+		dev_err(&pdev->dev,
+			"Error in PMIC regulator device tree node");
+		return ret;
+	}
+
+	regul = devm_kzalloc(&pdev->dev, ARRAY_SIZE(stpmic1_regulator_cfgs) *
+			     sizeof(struct stpmic1_regulator),
+			     GFP_KERNEL);
+	if (!regul)
+		return -ENOMEM;
+
+	for (i = 0; i < ARRAY_SIZE(stpmic1_regulator_cfgs); i++) {
+		/* Parse DT & find regulators to register */
+		init_data = stpmic1_regulators_matches[i].init_data;
+		if (init_data)
+			init_data->regulator_init = &stpmic1_regulator_parse_dt;
+
+		rdev = stpmic1_regulator_register(pdev, i, init_data, regul);
+		if (IS_ERR(rdev))
+			return PTR_ERR(rdev);
+
+		ret = stpmic1_regulator_init(pdev, rdev);
+		if (ret) {
+			dev_err(&pdev->dev,
+				"failed to initialize regulator %d\n", ret);
+			return ret;
+		}
+
+		regul++;
+	}
+
+	dev_dbg(&pdev->dev, "stpmic1_regulator driver probed\n");
+
+	return 0;
+}
+
+static const struct of_device_id of_pmic_regulator_match[] = {
+	{ .compatible = "st,stpmic1-regulators" },
+	{ },
+};
+
+MODULE_DEVICE_TABLE(of, of_pmic_regulator_match);
+
+static struct platform_driver stpmic1_regulator_driver = {
+	.driver = {
+		.name = "stpmic1-regulator",
+		.of_match_table = of_match_ptr(of_pmic_regulator_match),
+	},
+	.probe = stpmic1_regulator_probe,
+};
+
+module_platform_driver(stpmic1_regulator_driver);
+
+MODULE_DESCRIPTION("STPMIC1 PMIC voltage regulator driver");
+MODULE_AUTHOR("Pascal Paillet <p.paillet@st.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/regulator/tps65090-regulator.c b/drivers/regulator/tps65090-regulator.c
index edaef9e4dc74..db714d5edafc 100644
--- a/drivers/regulator/tps65090-regulator.c
+++ b/drivers/regulator/tps65090-regulator.c
@@ -374,6 +374,7 @@ static struct tps65090_platform_data *tps65090_parse_dt_reg_data(
 				gflags = GPIOD_OUT_HIGH;
 			else
 				gflags = GPIOD_OUT_LOW;
+			gflags |= GPIOD_FLAGS_BIT_NONEXCLUSIVE;
 
 			rpdata->gpiod = devm_gpiod_get_from_of_node(&pdev->dev,
 								    tps65090_matches[idx].of_node,