Backmerge tag 'v5.13-rc7' into drm-next

Backmerge Linux 5.13-rc7 to make some pulls from later bases apply,
and to bake in the conflicts so far.

1 files changed, 8 insertions, 8 deletions

diff --git a/drivers/spi/spi-zynq-qspi.c b/drivers/spi/spi-zynq-qspi.c
index 5d8a5ee62fa2..9262c6418463 100644
--- a/drivers/spi/spi-zynq-qspi.c
+++ b/drivers/spi/spi-zynq-qspi.c
@@ -367,7 +367,7 @@ static int zynq_qspi_config_op(struct zynq_qspi *xqspi, struct spi_device *spi)
 }
 
 /**
- * zynq_qspi_setup - Configure the QSPI controller
+ * zynq_qspi_setup_op - Configure the QSPI controller
  * @spi:	Pointer to the spi_device structure
  *
  * Sets the operational mode of QSPI controller for the next QSPI transfer, baud
@@ -528,18 +528,17 @@ static int zynq_qspi_exec_mem_op(struct spi_mem *mem,
 	struct zynq_qspi *xqspi = spi_controller_get_devdata(mem->spi->master);
 	int err = 0, i;
 	u8 *tmpbuf;
-	u8 opcode = op->cmd.opcode;
 
 	dev_dbg(xqspi->dev, "cmd:%#x mode:%d.%d.%d.%d\n",
-		opcode, op->cmd.buswidth, op->addr.buswidth,
+		op->cmd.opcode, op->cmd.buswidth, op->addr.buswidth,
 		op->dummy.buswidth, op->data.buswidth);
 
 	zynq_qspi_chipselect(mem->spi, true);
 	zynq_qspi_config_op(xqspi, mem->spi);
 
-	if (op->cmd.nbytes) {
+	if (op->cmd.opcode) {
 		reinit_completion(&xqspi->data_completion);
-		xqspi->txbuf = &opcode;
+		xqspi->txbuf = (u8 *)&op->cmd.opcode;
 		xqspi->rxbuf = NULL;
 		xqspi->tx_bytes = op->cmd.nbytes;
 		xqspi->rx_bytes = op->cmd.nbytes;
@@ -679,14 +678,14 @@ static int zynq_qspi_probe(struct platform_device *pdev)
 	xqspi->irq = platform_get_irq(pdev, 0);
 	if (xqspi->irq <= 0) {
 		ret = -ENXIO;
-		goto remove_master;
+		goto clk_dis_all;
 	}
 	ret = devm_request_irq(&pdev->dev, xqspi->irq, zynq_qspi_irq,
 			       0, pdev->name, xqspi);
 	if (ret != 0) {
 		ret = -ENXIO;
 		dev_err(&pdev->dev, "request_irq failed\n");
-		goto remove_master;
+		goto clk_dis_all;
 	}
 
 	ret = of_property_read_u32(np, "num-cs",
@@ -694,8 +693,9 @@ static int zynq_qspi_probe(struct platform_device *pdev)
 	if (ret < 0) {
 		ctlr->num_chipselect = 1;
 	} else if (num_cs > ZYNQ_QSPI_MAX_NUM_CS) {
+		ret = -EINVAL;
 		dev_err(&pdev->dev, "only 2 chip selects are available\n");
-		goto remove_master;
+		goto clk_dis_all;
 	} else {
 		ctlr->num_chipselect = num_cs;
 	}