diff options
| author | Miquel Raynal <miquel.raynal@bootlin.com> | 2019-11-08 15:07:40 +0100 |
|---|---|---|
| committer | Mark Brown <broonie@kernel.org> | 2019-11-08 17:43:51 +0000 |
| commit | 941be723735113028361c4664cd10134d3d27006 (patch) | |
| tree | c1bdc150a30b4dd40801c794a22bbb0e4a003c55 /drivers/spi | |
| parent | 087622d09472f96f1f5d6ced36ca75c92e86af21 (diff) | |
spi: zynq-qspi: Keep the bitfields naming consistent
Most of the bits/bitfields #define'd in this driver are composed with:
1/ the driver prefix
2/ the name of the register they apply to
Keep the naming consistent by applying this rule to the CONFIG register
internals. These definitions will be used in a following change set.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Link: https://lore.kernel.org/r/20191108140744.1734-4-miquel.raynal@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Diffstat (limited to 'drivers/spi')
| -rw-r--r-- | drivers/spi/spi-zynq-qspi.c | 12 |
1 files changed, 6 insertions, 6 deletions
diff --git a/drivers/spi/spi-zynq-qspi.c b/drivers/spi/spi-zynq-qspi.c index 9f53ea08adf7..530533b6c974 100644 --- a/drivers/spi/spi-zynq-qspi.c +++ b/drivers/spi/spi-zynq-qspi.c @@ -60,9 +60,9 @@ * These are the values used in the calculation of baud rate divisor and * setting the slave select. */ -#define ZYNQ_QSPI_BAUD_DIV_MAX GENMASK(2, 0) /* Baud rate maximum */ -#define ZYNQ_QSPI_BAUD_DIV_SHIFT 3 /* Baud rate divisor shift in CR */ -#define ZYNQ_QSPI_SS_SHIFT 10 /* Slave Select field shift in CR */ +#define ZYNQ_QSPI_CONFIG_BAUD_DIV_MAX GENMASK(2, 0) /* Baud rate maximum */ +#define ZYNQ_QSPI_CONFIG_BAUD_DIV_SHIFT 3 /* Baud rate divisor shift */ +#define ZYNQ_QSPI_CONFIG_PCS 10 /* Peripheral Chip Select */ /* * QSPI Interrupt Registers bit Masks @@ -292,7 +292,7 @@ static void zynq_qspi_chipselect(struct spi_device *spi, bool assert) /* Select the slave */ config_reg &= ~ZYNQ_QSPI_CONFIG_SSCTRL_MASK; config_reg |= (((~(BIT(spi->chip_select))) << - ZYNQ_QSPI_SS_SHIFT) & + ZYNQ_QSPI_CONFIG_PCS) & ZYNQ_QSPI_CONFIG_SSCTRL_MASK); } else { config_reg |= ZYNQ_QSPI_CONFIG_SSCTRL_MASK; @@ -331,7 +331,7 @@ static int zynq_qspi_config_op(struct zynq_qspi *xqspi, struct spi_device *spi) * ---------------- * 111 - divide by 256 */ - while ((baud_rate_val < ZYNQ_QSPI_BAUD_DIV_MAX) && + while ((baud_rate_val < ZYNQ_QSPI_CONFIG_BAUD_DIV_MAX) && (clk_get_rate(xqspi->refclk) / (2 << baud_rate_val)) > spi->max_speed_hz) baud_rate_val++; @@ -347,7 +347,7 @@ static int zynq_qspi_config_op(struct zynq_qspi *xqspi, struct spi_device *spi) config_reg |= ZYNQ_QSPI_CONFIG_CPOL_MASK; config_reg &= ~ZYNQ_QSPI_CONFIG_BDRATE_MASK; - config_reg |= (baud_rate_val << ZYNQ_QSPI_BAUD_DIV_SHIFT); + config_reg |= (baud_rate_val << ZYNQ_QSPI_CONFIG_BAUD_DIV_SHIFT); zynq_qspi_write(xqspi, ZYNQ_QSPI_CONFIG_OFFSET, config_reg); return 0; |