Merge tag 'tty-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty and serial driver updates from Greg KH:
 "Here is the big set of tty and serial driver updates for 5.13-rc1.

  Actually busy this release, with a number of cleanups happening:

   - much needed core tty cleanups by Jiri Slaby

   - removal of unused and orphaned old-style serial drivers. If anyone
     shows up with this hardware, it is trivial to restore these but we
     really do not think they are in use anymore.

   - fixes and cleanups from Johan Hovold on a number of termios setting
     corner cases that loads of drivers got wrong as well as removing
     unneeded code due to tty core changes from long ago that were never
     propagated out to the drivers

   - loads of platform-specific serial port driver updates and fixes

   - coding style cleanups and other small fixes and updates all over
     the tty/serial tree.

  All of these have been in linux-next for a while now with no reported
  issues"

* tag 'tty-5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (186 commits)
  serial: extend compile-test coverage
  serial: stm32: add FIFO threshold configuration
  dt-bindings: serial: 8250: update TX FIFO trigger level
  dt-bindings: serial: stm32: override FIFO threshold properties
  dt-bindings: serial: add RX and TX FIFO properties
  serial: xilinx_uartps: drop low-latency workaround
  serial: vt8500: drop low-latency workaround
  serial: timbuart: drop low-latency workaround
  serial: sunsu: drop low-latency workaround
  serial: sifive: drop low-latency workaround
  serial: txx9: drop low-latency workaround
  serial: sa1100: drop low-latency workaround
  serial: rp2: drop low-latency workaround
  serial: rda: drop low-latency workaround
  serial: owl: drop low-latency workaround
  serial: msm_serial: drop low-latency workaround
  serial: mpc52xx_uart: drop low-latency workaround
  serial: meson: drop low-latency workaround
  serial: mcf: drop low-latency workaround
  serial: lpc32xx_hs: drop low-latency workaround
  ...

1 files changed, 7 insertions, 10 deletions

diff --git a/drivers/tty/serial/stm32-usart.h b/drivers/tty/serial/stm32-usart.h
index cb4f327c46db..07ac291328cd 100644
--- a/drivers/tty/serial/stm32-usart.h
+++ b/drivers/tty/serial/stm32-usart.h
@@ -25,6 +25,7 @@ struct stm32_usart_offsets {
 struct stm32_usart_config {
 	u8 uart_enable_bit; /* USART_CR1_UE */
 	bool has_7bits_data;
+	bool has_swap;
 	bool has_wakeup;
 	bool has_fifo;
 	int fifosize;
@@ -76,6 +77,7 @@ struct stm32_usart_info stm32f7_info = {
 	.cfg = {
 		.uart_enable_bit = 0,
 		.has_7bits_data = true,
+		.has_swap = true,
 		.fifosize = 1,
 	}
 };
@@ -97,6 +99,7 @@ struct stm32_usart_info stm32h7_info = {
 	.cfg = {
 		.uart_enable_bit = 0,
 		.has_7bits_data = true,
+		.has_swap = true,
 		.has_wakeup = true,
 		.has_fifo = true,
 		.fifosize = 16,
@@ -127,9 +130,6 @@ struct stm32_usart_info stm32h7_info = {
 /* Dummy bits */
 #define USART_SR_DUMMY_RX	BIT(16)
 
-/* USART_ICR (F7) */
-#define USART_CR_TC		BIT(6)
-
 /* USART_DR */
 #define USART_DR_MASK		GENMASK(8, 0)
 
@@ -216,12 +216,6 @@ struct stm32_usart_info stm32h7_info = {
 #define USART_CR3_TXFTCFG_MASK	GENMASK(31, 29)	/* H7 */
 #define USART_CR3_TXFTCFG_SHIFT	29		/* H7 */
 
-/* TX FIFO threashold set to half of its depth */
-#define USART_CR3_TXFTCFG_HALF	0x2
-
-/* RX FIFO threashold set to half of its depth */
-#define USART_CR3_RXFTCFG_HALF	0x2
-
 /* USART_GTPR */
 #define USART_GTPR_PSC_MASK	GENMASK(7, 0)
 #define USART_GTPR_GT_MASK	GENMASK(15, 8)
@@ -271,8 +265,11 @@ struct stm32_port {
 	int last_res;
 	bool tx_dma_busy;	 /* dma tx busy               */
 	bool hw_flow_control;
+	bool swap;		 /* swap RX & TX pins */
 	bool fifoen;
-	int wakeirq;
+	int rxftcfg;		/* RX FIFO threshold CFG      */
+	int txftcfg;		/* TX FIFO threshold CFG      */
+	bool wakeup_src;
 	int rdr_mask;		/* receive data register mask */
 	struct mctrl_gpios *gpios; /* modem control gpios */
 };