Merge 5.8-rc6 into tty-next

We need the serial/tty fixes in here as well.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

7 files changed, 53 insertions, 121 deletions

diff --git a/drivers/tty/serial/cpm_uart/cpm_uart_core.c b/drivers/tty/serial/cpm_uart/cpm_uart_core.c
index a04f74d2e854..4df47d02b34b 100644
--- a/drivers/tty/serial/cpm_uart/cpm_uart_core.c
+++ b/drivers/tty/serial/cpm_uart/cpm_uart_core.c
@@ -1215,7 +1215,12 @@ static int cpm_uart_init_port(struct device_node *np,
 
 		pinfo->gpios[i] = NULL;
 
-		gpiod = devm_gpiod_get_index(dev, NULL, i, GPIOD_ASIS);
+		gpiod = devm_gpiod_get_index_optional(dev, NULL, i, GPIOD_ASIS);
+
+		if (IS_ERR(gpiod)) {
+			ret = PTR_ERR(gpiod);
+			goto out_irq;
+		}
 
 		if (gpiod) {
 			if (i == GPIO_RTS || i == GPIO_DTR)
@@ -1237,6 +1242,8 @@ static int cpm_uart_init_port(struct device_node *np,
 
 	return cpm_uart_request_port(&pinfo->port);
 
+out_irq:
+	irq_dispose_mapping(pinfo->port.irq);
 out_pram:
 	cpm_uart_unmap_pram(pinfo, pram);
 out_mem:
diff --git a/drivers/tty/serial/kgdb_nmi.c b/drivers/tty/serial/kgdb_nmi.c
index 5022447afa23..6004c0c1d173 100644
--- a/drivers/tty/serial/kgdb_nmi.c
+++ b/drivers/tty/serial/kgdb_nmi.c
@@ -50,7 +50,7 @@ static int kgdb_nmi_console_setup(struct console *co, char *options)
 	 * I/O utilities that messages sent to the console will automatically
 	 * be displayed on the dbg_io.
 	 */
-	dbg_io_ops->is_console = true;
+	dbg_io_ops->cons = co;
 
 	return 0;
 }
diff --git a/drivers/tty/serial/kgdboc.c b/drivers/tty/serial/kgdboc.c
index fe6ae98360a2..49d0c7f2b29b 100644
--- a/drivers/tty/serial/kgdboc.c
+++ b/drivers/tty/serial/kgdboc.c
@@ -45,7 +45,6 @@ static struct platform_device *kgdboc_pdev;
 
 #if IS_BUILTIN(CONFIG_KGDB_SERIAL_CONSOLE)
 static struct kgdb_io		kgdboc_earlycon_io_ops;
-static struct console		*earlycon;
 static int                      (*earlycon_orig_exit)(struct console *con);
 #endif /* IS_BUILTIN(CONFIG_KGDB_SERIAL_CONSOLE) */
 
@@ -145,7 +144,7 @@ static void kgdboc_unregister_kbd(void)
 #if IS_BUILTIN(CONFIG_KGDB_SERIAL_CONSOLE)
 static void cleanup_earlycon(void)
 {
-	if (earlycon)
+	if (kgdboc_earlycon_io_ops.cons)
 		kgdb_unregister_io_module(&kgdboc_earlycon_io_ops);
 }
 #else /* !IS_BUILTIN(CONFIG_KGDB_SERIAL_CONSOLE) */
@@ -178,7 +177,7 @@ static int configure_kgdboc(void)
 		goto noconfig;
 	}
 
-	kgdboc_io_ops.is_console = 0;
+	kgdboc_io_ops.cons = NULL;
 	kgdb_tty_driver = NULL;
 
 	kgdboc_use_kms = 0;
@@ -198,7 +197,7 @@ static int configure_kgdboc(void)
 		int idx;
 		if (cons->device && cons->device(cons, &idx) == p &&
 		    idx == tty_line) {
-			kgdboc_io_ops.is_console = 1;
+			kgdboc_io_ops.cons = cons;
 			break;
 		}
 	}
@@ -433,7 +432,8 @@ static int kgdboc_earlycon_get_char(void)
 {
 	char c;
 
-	if (!earlycon->read(earlycon, &c, 1))
+	if (!kgdboc_earlycon_io_ops.cons->read(kgdboc_earlycon_io_ops.cons,
+					       &c, 1))
 		return NO_POLL_CHAR;
 
 	return c;
@@ -441,7 +441,8 @@ static int kgdboc_earlycon_get_char(void)
 
 static void kgdboc_earlycon_put_char(u8 chr)
 {
-	earlycon->write(earlycon, &chr, 1);
+	kgdboc_earlycon_io_ops.cons->write(kgdboc_earlycon_io_ops.cons, &chr,
+					   1);
 }
 
 static void kgdboc_earlycon_pre_exp_handler(void)
@@ -461,7 +462,7 @@ static void kgdboc_earlycon_pre_exp_handler(void)
 	 * boot if we detect this case.
 	 */
 	for_each_console(con)
-		if (con == earlycon)
+		if (con == kgdboc_earlycon_io_ops.cons)
 			return;
 
 	already_warned = true;
@@ -484,25 +485,25 @@ static int kgdboc_earlycon_deferred_exit(struct console *con)
 
 static void kgdboc_earlycon_deinit(void)
 {
-	if (!earlycon)
+	if (!kgdboc_earlycon_io_ops.cons)
 		return;
 
-	if (earlycon->exit == kgdboc_earlycon_deferred_exit)
+	if (kgdboc_earlycon_io_ops.cons->exit == kgdboc_earlycon_deferred_exit)
 		/*
 		 * kgdboc_earlycon is exiting but original boot console exit
 		 * was never called (AKA kgdboc_earlycon_deferred_exit()
 		 * didn't ever run).  Undo our trap.
 		 */
-		earlycon->exit = earlycon_orig_exit;
-	else if (earlycon->exit)
+		kgdboc_earlycon_io_ops.cons->exit = earlycon_orig_exit;
+	else if (kgdboc_earlycon_io_ops.cons->exit)
 		/*
 		 * We skipped calling the exit() routine so we could try to
 		 * keep using the boot console even after it went away.  We're
 		 * finally done so call the function now.
 		 */
-		earlycon->exit(earlycon);
+		kgdboc_earlycon_io_ops.cons->exit(kgdboc_earlycon_io_ops.cons);
 
-	earlycon = NULL;
+	kgdboc_earlycon_io_ops.cons = NULL;
 }
 
 static struct kgdb_io kgdboc_earlycon_io_ops = {
@@ -511,7 +512,6 @@ static struct kgdb_io kgdboc_earlycon_io_ops = {
 	.write_char		= kgdboc_earlycon_put_char,
 	.pre_exception		= kgdboc_earlycon_pre_exp_handler,
 	.deinit			= kgdboc_earlycon_deinit,
-	.is_console		= true,
 };
 
 #define MAX_CONSOLE_NAME_LEN (sizeof((struct console *) 0)->name)
@@ -558,10 +558,10 @@ static int __init kgdboc_earlycon_init(char *opt)
 		goto unlock;
 	}
 
-	earlycon = con;
+	kgdboc_earlycon_io_ops.cons = con;
 	pr_info("Going to register kgdb with earlycon '%s'\n", con->name);
 	if (kgdb_register_io_module(&kgdboc_earlycon_io_ops) != 0) {
-		earlycon = NULL;
+		kgdboc_earlycon_io_ops.cons = NULL;
 		pr_info("Failed to register kgdb with earlycon\n");
 	} else {
 		/* Trap exit so we can keep earlycon longer if needed. */
diff --git a/drivers/tty/serial/mxs-auart.c b/drivers/tty/serial/mxs-auart.c
index b4f835e7de23..b784323a6a7b 100644
--- a/drivers/tty/serial/mxs-auart.c
+++ b/drivers/tty/serial/mxs-auart.c
@@ -1698,21 +1698,21 @@ static int mxs_auart_probe(struct platform_device *pdev)
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0) {
 		ret = irq;
-		goto out_disable_clks;
+		goto out_iounmap;
 	}
 
 	s->port.irq = irq;
 	ret = devm_request_irq(&pdev->dev, irq, mxs_auart_irq_handle, 0,
 			       dev_name(&pdev->dev), s);
 	if (ret)
-		goto out_disable_clks;
+		goto out_iounmap;
 
 	platform_set_drvdata(pdev, s);
 
 	ret = mxs_auart_init_gpios(s, &pdev->dev);
 	if (ret) {
 		dev_err(&pdev->dev, "Failed to initialize GPIOs.\n");
-		goto out_disable_clks;
+		goto out_iounmap;
 	}
 
 	/*
@@ -1720,7 +1720,7 @@ static int mxs_auart_probe(struct platform_device *pdev)
 	 */
 	ret = mxs_auart_request_gpio_irq(s);
 	if (ret)
-		goto out_disable_clks;
+		goto out_iounmap;
 
 	auart_port[s->port.line] = s;
 
@@ -1746,6 +1746,9 @@ out_free_qpio_irq:
 	mxs_auart_free_gpio_irq(s);
 	auart_port[pdev->id] = NULL;
 
+out_iounmap:
+	iounmap(s->port.membase);
+
 out_disable_clks:
 	if (is_asm9260_auart(s)) {
 		clk_disable_unprepare(s->clk);
@@ -1761,6 +1764,7 @@ static int mxs_auart_remove(struct platform_device *pdev)
 	uart_remove_one_port(&auart_driver, &s->port);
 	auart_port[pdev->id] = NULL;
 	mxs_auart_free_gpio_irq(s);
+	iounmap(s->port.membase);
 	if (is_asm9260_auart(s)) {
 		clk_disable_unprepare(s->clk);
 		clk_disable_unprepare(s->clk_ahb);
diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c
index 5750f3628357..309fa42b0861 100644
--- a/drivers/tty/serial/serial_core.c
+++ b/drivers/tty/serial/serial_core.c
@@ -42,8 +42,6 @@ static struct lock_class_key port_lock_key;
 
 #define HIGH_BITS_OFFSET	((sizeof(long)-sizeof(int))*8)
 
-#define SYSRQ_TIMEOUT	(HZ * 5)
-
 static void uart_change_speed(struct tty_struct *tty, struct uart_state *state,
 					struct ktermios *old_termios);
 static void uart_wait_until_sent(struct tty_struct *tty, int timeout);
@@ -1917,6 +1915,12 @@ static inline bool uart_console_enabled(struct uart_port *port)
 	return uart_console(port) && (port->cons->flags & CON_ENABLED);
 }
 
+static void __uart_port_spin_lock_init(struct uart_port *port)
+{
+	spin_lock_init(&port->lock);
+	lockdep_set_class(&port->lock, &port_lock_key);
+}
+
 /*
  * Ensure that the serial console lock is initialised early.
  * If this port is a console, then the spinlock is already initialised.
@@ -1926,8 +1930,7 @@ static inline void uart_port_spin_lock_init(struct uart_port *port)
 	if (uart_console(port))
 		return;
 
-	spin_lock_init(&port->lock);
-	lockdep_set_class(&port->lock, &port_lock_key);
+	__uart_port_spin_lock_init(port);
 }
 
 #if defined(CONFIG_SERIAL_CORE_CONSOLE) || defined(CONFIG_CONSOLE_POLL)
@@ -2374,6 +2377,13 @@ uart_configure_port(struct uart_driver *drv, struct uart_state *state,
 		uart_change_pm(state, UART_PM_STATE_ON);
 
 		/*
+		 * If this driver supports console, and it hasn't been
+		 * successfully registered yet, initialise spin lock for it.
+		 */
+		if (port->cons && !(port->cons->flags & CON_ENABLED))
+			__uart_port_spin_lock_init(port);
+
+		/*
 		 * Ensure that the modem control lines are de-activated.
 		 * keep the DTR setting that is set in uart_set_options()
 		 * We probably don't need a spinlock around this, but
@@ -3164,7 +3174,7 @@ static DECLARE_WORK(sysrq_enable_work, uart_sysrq_on);
  *	Returns false if @ch is out of enabling sequence and should be
  *	handled some other way, true if @ch was consumed.
  */
-static bool uart_try_toggle_sysrq(struct uart_port *port, unsigned int ch)
+bool uart_try_toggle_sysrq(struct uart_port *port, unsigned int ch)
 {
 	int sysrq_toggle_seq_len = strlen(sysrq_toggle_seq);
 
@@ -3187,99 +3197,9 @@ static bool uart_try_toggle_sysrq(struct uart_port *port, unsigned int ch)
 	port->sysrq = 0;
 	return true;
 }
-#else
-static inline bool uart_try_toggle_sysrq(struct uart_port *port, unsigned int ch)
-{
-	return false;
-}
+EXPORT_SYMBOL_GPL(uart_try_toggle_sysrq);
 #endif
 
-int uart_handle_sysrq_char(struct uart_port *port, unsigned int ch)
-{
-	if (!IS_ENABLED(CONFIG_MAGIC_SYSRQ_SERIAL))
-		return 0;
-
-	if (!port->has_sysrq || !port->sysrq)
-		return 0;
-
-	if (ch && time_before(jiffies, port->sysrq)) {
-		if (sysrq_mask()) {
-			handle_sysrq(ch);
-			port->sysrq = 0;
-			return 1;
-		}
-		if (uart_try_toggle_sysrq(port, ch))
-			return 1;
-	}
-	port->sysrq = 0;
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(uart_handle_sysrq_char);
-
-int uart_prepare_sysrq_char(struct uart_port *port, unsigned int ch)
-{
-	if (!IS_ENABLED(CONFIG_MAGIC_SYSRQ_SERIAL))
-		return 0;
-
-	if (!port->has_sysrq || !port->sysrq)
-		return 0;
-
-	if (ch && time_before(jiffies, port->sysrq)) {
-		if (sysrq_mask()) {
-			port->sysrq_ch = ch;
-			port->sysrq = 0;
-			return 1;
-		}
-		if (uart_try_toggle_sysrq(port, ch))
-			return 1;
-	}
-	port->sysrq = 0;
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(uart_prepare_sysrq_char);
-
-void uart_unlock_and_check_sysrq(struct uart_port *port, unsigned long flags)
-__releases(&port->lock)
-{
-	if (port->has_sysrq) {
-		int sysrq_ch = port->sysrq_ch;
-
-		port->sysrq_ch = 0;
-		spin_unlock_irqrestore(&port->lock, flags);
-		if (sysrq_ch)
-			handle_sysrq(sysrq_ch);
-	} else {
-		spin_unlock_irqrestore(&port->lock, flags);
-	}
-}
-EXPORT_SYMBOL_GPL(uart_unlock_and_check_sysrq);
-
-/*
- * We do the SysRQ and SAK checking like this...
- */
-int uart_handle_break(struct uart_port *port)
-{
-	struct uart_state *state = port->state;
-
-	if (port->handle_break)
-		port->handle_break(port);
-
-	if (port->has_sysrq && uart_console(port)) {
-		if (!port->sysrq) {
-			port->sysrq = jiffies + SYSRQ_TIMEOUT;
-			return 1;
-		}
-		port->sysrq = 0;
-	}
-
-	if (port->flags & UPF_SAK)
-		do_SAK(state->port.tty);
-	return 0;
-}
-EXPORT_SYMBOL_GPL(uart_handle_break);
-
 EXPORT_SYMBOL(uart_write_wakeup);
 EXPORT_SYMBOL(uart_register_driver);
 EXPORT_SYMBOL(uart_unregister_driver);
@@ -3290,8 +3210,7 @@ EXPORT_SYMBOL(uart_remove_one_port);
 
 /**
  * uart_get_rs485_mode() - retrieve rs485 properties for given uart
- * @dev: uart device
- * @rs485conf: output parameter
+ * @port: uart device's target port
  *
  * This function implements the device tree binding described in
  * Documentation/devicetree/bindings/serial/rs485.txt.
diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
index e1179e74a2b8..204bb68ce3ca 100644
--- a/drivers/tty/serial/sh-sci.c
+++ b/drivers/tty/serial/sh-sci.c
@@ -3301,6 +3301,9 @@ static int sci_probe_single(struct platform_device *dev,
 		sciport->port.flags |= UPF_HARD_FLOW;
 	}
 
+	if (sci_uart_driver.cons->index == sciport->port.line)
+		spin_lock_init(&sciport->port.lock);
+
 	ret = uart_add_one_port(&sci_uart_driver, &sciport->port);
 	if (ret) {
 		sci_cleanup_single(sciport);
diff --git a/drivers/tty/serial/xilinx_uartps.c b/drivers/tty/serial/xilinx_uartps.c
index b9d672af8b65..672cfa075e28 100644
--- a/drivers/tty/serial/xilinx_uartps.c
+++ b/drivers/tty/serial/xilinx_uartps.c
@@ -1465,7 +1465,6 @@ static int cdns_uart_probe(struct platform_device *pdev)
 		cdns_uart_uart_driver.nr = CDNS_UART_NR_PORTS;
 #ifdef CONFIG_SERIAL_XILINX_PS_UART_CONSOLE
 		cdns_uart_uart_driver.cons = &cdns_uart_console;
-		cdns_uart_console.index = id;
 #endif
 
 		rc = uart_register_driver(&cdns_uart_uart_driver);