diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2017-05-04 18:03:51 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2017-05-04 18:03:51 -0700 |
commit | 8f28472a739e8e39adc6e64ee5b460df039f0e4f (patch) | |
tree | 979e35f3d1d2be94c06c942bcdc9ee68cbebaacb /drivers/usb/core/usb.c | |
parent | 4ac4d584886a4f47f8ff3bca0f32ff9a2987d3e5 (diff) | |
parent | c034a43e72dda58e4a184d71f5502ef356e04453 (diff) |
Merge tag 'usb-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB updates from Greg KH:
"Here is the big USB patchset for 4.12-rc1.
Lots of good stuff here, after many many many attempts, the kernel
finally has a working typeC interface, many thanks to Heikki and
Guenter and others who have taken the time to get this merged. It
wasn't an easy path for them at all.
There's also a staging driver that uses this new api, which is why
it's coming in through this tree.
Along with that, there's the usual huge number of changes for gadget
drivers, xhci, and other stuff. Johan also finally refactored pretty
much every driver that was looking at USB endpoints to do it in a
common way, which will help prevent any "badly-formed" devices from
causing problems in drivers. That too wasn't a simple task.
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (263 commits)
staging: typec: Fairchild FUSB302 Type-c chip driver
staging: typec: Type-C Port Controller Interface driver (tcpci)
staging: typec: USB Type-C Port Manager (tcpm)
usb: host: xhci: remove #ifdef around PM functions
usb: musb: don't mark of_dev_auxdata as initdata
usb: misc: legousbtower: Fix buffers on stack
USB: Revert "cdc-wdm: fix "out-of-sync" due to missing notifications"
usb: Make sure usb/phy/of gets built-in
USB: storage: e-mail update in drivers/usb/storage/unusual_devs.h
usb: host: xhci: print correct command ring address
usb: host: xhci: delete sp_dma_buffers for scratchpad
usb: host: xhci: using correct specification chapter reference for DCBAAP
xhci: switch to pci_alloc_irq_vectors
usb: host: xhci-plat: set resume_quirk() for R-Car controllers
usb: host: xhci-plat: add resume_quirk()
usb: host: xhci-plat: enable clk in resume timing
usb: host: plat: Enable xHCI plat runtime PM
USB: serial: ftdi_sio: add device ID for Microsemi/Arrow SF2PLUS Dev Kit
USB: serial: constify static arrays
usb: fix some references for /proc/bus/usb
...
Diffstat (limited to 'drivers/usb/core/usb.c')
-rw-r--r-- | drivers/usb/core/usb.c | 152 |
1 files changed, 143 insertions, 9 deletions
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c index a2ccc69fb45c..28b053cacc90 100644 --- a/drivers/usb/core/usb.c +++ b/drivers/usb/core/usb.c @@ -74,6 +74,140 @@ MODULE_PARM_DESC(autosuspend, "default autosuspend delay"); #define usb_autosuspend_delay 0 #endif +static bool match_endpoint(struct usb_endpoint_descriptor *epd, + struct usb_endpoint_descriptor **bulk_in, + struct usb_endpoint_descriptor **bulk_out, + struct usb_endpoint_descriptor **int_in, + struct usb_endpoint_descriptor **int_out) +{ + switch (usb_endpoint_type(epd)) { + case USB_ENDPOINT_XFER_BULK: + if (usb_endpoint_dir_in(epd)) { + if (bulk_in && !*bulk_in) { + *bulk_in = epd; + break; + } + } else { + if (bulk_out && !*bulk_out) { + *bulk_out = epd; + break; + } + } + + return false; + case USB_ENDPOINT_XFER_INT: + if (usb_endpoint_dir_in(epd)) { + if (int_in && !*int_in) { + *int_in = epd; + break; + } + } else { + if (int_out && !*int_out) { + *int_out = epd; + break; + } + } + + return false; + default: + return false; + } + + return (!bulk_in || *bulk_in) && (!bulk_out || *bulk_out) && + (!int_in || *int_in) && (!int_out || *int_out); +} + +/** + * usb_find_common_endpoints() -- look up common endpoint descriptors + * @alt: alternate setting to search + * @bulk_in: pointer to descriptor pointer, or NULL + * @bulk_out: pointer to descriptor pointer, or NULL + * @int_in: pointer to descriptor pointer, or NULL + * @int_out: pointer to descriptor pointer, or NULL + * + * Search the alternate setting's endpoint descriptors for the first bulk-in, + * bulk-out, interrupt-in and interrupt-out endpoints and return them in the + * provided pointers (unless they are NULL). + * + * If a requested endpoint is not found, the corresponding pointer is set to + * NULL. + * + * Return: Zero if all requested descriptors were found, or -ENXIO otherwise. + */ +int usb_find_common_endpoints(struct usb_host_interface *alt, + struct usb_endpoint_descriptor **bulk_in, + struct usb_endpoint_descriptor **bulk_out, + struct usb_endpoint_descriptor **int_in, + struct usb_endpoint_descriptor **int_out) +{ + struct usb_endpoint_descriptor *epd; + int i; + + if (bulk_in) + *bulk_in = NULL; + if (bulk_out) + *bulk_out = NULL; + if (int_in) + *int_in = NULL; + if (int_out) + *int_out = NULL; + + for (i = 0; i < alt->desc.bNumEndpoints; ++i) { + epd = &alt->endpoint[i].desc; + + if (match_endpoint(epd, bulk_in, bulk_out, int_in, int_out)) + return 0; + } + + return -ENXIO; +} +EXPORT_SYMBOL_GPL(usb_find_common_endpoints); + +/** + * usb_find_common_endpoints_reverse() -- look up common endpoint descriptors + * @alt: alternate setting to search + * @bulk_in: pointer to descriptor pointer, or NULL + * @bulk_out: pointer to descriptor pointer, or NULL + * @int_in: pointer to descriptor pointer, or NULL + * @int_out: pointer to descriptor pointer, or NULL + * + * Search the alternate setting's endpoint descriptors for the last bulk-in, + * bulk-out, interrupt-in and interrupt-out endpoints and return them in the + * provided pointers (unless they are NULL). + * + * If a requested endpoint is not found, the corresponding pointer is set to + * NULL. + * + * Return: Zero if all requested descriptors were found, or -ENXIO otherwise. + */ +int usb_find_common_endpoints_reverse(struct usb_host_interface *alt, + struct usb_endpoint_descriptor **bulk_in, + struct usb_endpoint_descriptor **bulk_out, + struct usb_endpoint_descriptor **int_in, + struct usb_endpoint_descriptor **int_out) +{ + struct usb_endpoint_descriptor *epd; + int i; + + if (bulk_in) + *bulk_in = NULL; + if (bulk_out) + *bulk_out = NULL; + if (int_in) + *int_in = NULL; + if (int_out) + *int_out = NULL; + + for (i = alt->desc.bNumEndpoints - 1; i >= 0; --i) { + epd = &alt->endpoint[i].desc; + + if (match_endpoint(epd, bulk_in, bulk_out, int_in, int_out)) + return 0; + } + + return -ENXIO; +} +EXPORT_SYMBOL_GPL(usb_find_common_endpoints_reverse); /** * usb_find_alt_setting() - Given a configuration, find the alternate setting @@ -453,9 +587,9 @@ struct usb_device *usb_alloc_dev(struct usb_device *parent, * Note: calling dma_set_mask() on a USB device would set the * mask for the entire HCD, so don't do that. */ - dev->dev.dma_mask = bus->controller->dma_mask; - dev->dev.dma_pfn_offset = bus->controller->dma_pfn_offset; - set_dev_node(&dev->dev, dev_to_node(bus->controller)); + dev->dev.dma_mask = bus->sysdev->dma_mask; + dev->dev.dma_pfn_offset = bus->sysdev->dma_pfn_offset; + set_dev_node(&dev->dev, dev_to_node(bus->sysdev)); dev->state = USB_STATE_ATTACHED; dev->lpm_disable_count = 1; atomic_set(&dev->urbnum, 0); @@ -803,7 +937,7 @@ struct urb *usb_buffer_map(struct urb *urb) if (!urb || !urb->dev || !(bus = urb->dev->bus) - || !(controller = bus->controller)) + || !(controller = bus->sysdev)) return NULL; if (controller->dma_mask) { @@ -841,7 +975,7 @@ void usb_buffer_dmasync(struct urb *urb) || !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP) || !urb->dev || !(bus = urb->dev->bus) - || !(controller = bus->controller)) + || !(controller = bus->sysdev)) return; if (controller->dma_mask) { @@ -875,7 +1009,7 @@ void usb_buffer_unmap(struct urb *urb) || !(urb->transfer_flags & URB_NO_TRANSFER_DMA_MAP) || !urb->dev || !(bus = urb->dev->bus) - || !(controller = bus->controller)) + || !(controller = bus->sysdev)) return; if (controller->dma_mask) { @@ -925,7 +1059,7 @@ int usb_buffer_map_sg(const struct usb_device *dev, int is_in, if (!dev || !(bus = dev->bus) - || !(controller = bus->controller) + || !(controller = bus->sysdev) || !controller->dma_mask) return -EINVAL; @@ -961,7 +1095,7 @@ void usb_buffer_dmasync_sg(const struct usb_device *dev, int is_in, if (!dev || !(bus = dev->bus) - || !(controller = bus->controller) + || !(controller = bus->sysdev) || !controller->dma_mask) return; @@ -989,7 +1123,7 @@ void usb_buffer_unmap_sg(const struct usb_device *dev, int is_in, if (!dev || !(bus = dev->bus) - || !(controller = bus->controller) + || !(controller = bus->sysdev) || !controller->dma_mask) return; |