usb: typec: qcom: Add Qualcomm PMIC Type-C driver

This commit adds a QCOM PMIC TCPM driver with an initial pm8150b
block.

The driver is layered as follows:

qcom_pmic_typec.c : Responsible for registering with TCPM and arbitrates
                    access to the Type-C and PDPHY hardware blocks in one
                    place.  This presents a single TCPM device to device to
                    the Linux TCPM layer.

qcom_pmic_typec_pdphy.c: Responsible for interfacing with the PDPHY hardware and
                         processing power-delivery related calls from TCPM.
                         This hardware binding can be extended to
                         facilitate similar hardware in different PMICs.

qcom_pmic_typec_port.c: Responsible for notifying and processing Type-C
                        related calls from TCPM. Similar to the pdphy this
                        layer can be extended to handle the specifics of
                        different Qualcomm PMIC Type-C port managers.

This code provides all of the same functionality as the existing
qcom typec driver plus power-delivery as well.

As a result commit 6c8cf3695176 ("usb: typec: Add QCOM PMIC typec detection
driver") can be deleted entirely.

References code from Jonathan Marek, Jack Pham, Wesley Cheng, Hemant Kumar,
Guru Das Srinagesh and Ashay Jaiswal.

Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Caleb Connolly <caleb.connolly@linaro.org>
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20230508142308.1656410-8-bryan.odonoghue@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 0 insertions, 13 deletions

diff --git a/drivers/usb/typec/Kconfig b/drivers/usb/typec/Kconfig
index 831e7049977d..2f80c2792dbd 100644
--- a/drivers/usb/typec/Kconfig
+++ b/drivers/usb/typec/Kconfig
@@ -100,19 +100,6 @@ config TYPEC_STUSB160X
 	  If you choose to build this driver as a dynamically linked module, the
 	  module will be called stusb160x.ko.
 
-config TYPEC_QCOM_PMIC
-	tristate "Qualcomm PMIC USB Type-C driver"
-	depends on ARCH_QCOM || COMPILE_TEST
-	depends on USB_ROLE_SWITCH || !USB_ROLE_SWITCH
-	help
-	  Driver for supporting role switch over the Qualcomm PMIC.  This will
-	  handle the USB Type-C role and orientation detection reported by the
-	  QCOM PMIC if the PMIC has the capability to handle USB Type-C
-	  detection.
-
-	  It will also enable the VBUS output to connected devices when a
-	  DFP connection is made.
-
 config TYPEC_WUSB3801
 	tristate "Willsemi WUSB3801 Type-C port controller driver"
 	depends on I2C