Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6:
  mfd: early init for MFD running regulators
  mfd: fix tmio related warnings
  mfd: asic3: enable SD/SDIO cell
  mfd: asic3: enable DS1WM cell
  mfd: asic3: remove SD/SDIO controller register definitions
  mfd: asic3: use resource_size macro instead of local variable
  mfd: add ASIC3 IRQ numbers
  mfd: asic3: add clock handling for MFD cells
  mfd: asic3: add asic3_set_register common operation
  mfd: Fix Kconfig help text for WM8350
  mfd: add PCAP driver
  mfd: add U300 AB3100 core support
  drivers/mfd: remove obsolete irq_desc_t typedef
  mfd/pcf50633-gpio.c: add MODULE_LICENSE
  mfd: Mark WM8350 mask revision as readable to match silicon
  mfd: Mark clocks_init as non-init in twl4030-core.c
  mfd: Correct readability of WM8350 register 227

15 files changed, 1844 insertions, 16 deletions

diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index ee3927ab11e0..491ac0f800d2 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -30,6 +30,7 @@ config MFD_SM501_GPIO
 config MFD_ASIC3
 	bool "Support for Compaq ASIC3"
 	depends on GENERIC_HARDIRQS && GPIOLIB && ARM
+	select MFD_CORE
 	 ---help---
 	  This driver supports the ASIC3 multifunction chip found on many
 	  PDAs (mainly iPAQ and HTC based ones)
@@ -152,7 +153,7 @@ config MFD_WM8400
 	depends on I2C
 	help
 	  Support for the Wolfson Microelecronics WM8400 PMIC and audio
-	  CODEC.  This driver adds provides common support for accessing
+	  CODEC.  This driver provides common support for accessing
 	  the device, additional drivers must be enabled in order to use
 	  the functionality of the device.
 
@@ -241,6 +242,27 @@ config PCF50633_GPIO
 	 Say yes here if you want to include support GPIO for pins on
 	 the PCF50633 chip.
 
+config AB3100_CORE
+	tristate "ST-Ericsson AB3100 Mixed Signal Circuit core functions"
+	depends on I2C
+	default y if ARCH_U300
+	help
+	  Select this to enable the AB3100 Mixed Signal IC core
+	  functionality. This connects to a AB3100 on the I2C bus
+	  and expose a number of symbols needed for dependent devices
+	  to read and write registers and subscribe to events from
+	  this multi-functional IC. This is needed to use other features
+	  of the AB3100 such as battery-backed RTC, charging control,
+	  LEDs, vibrator, system power and temperature, power management
+	  and ALSA sound.
+
+config EZX_PCAP
+	bool "PCAP Support"
+	depends on GENERIC_HARDIRQS && SPI_MASTER
+	help
+	  This enables the PCAP ASIC present on EZX Phones. This is
+	  needed for MMC, TouchScreen, Sound, USB, etc..
+
 endmenu
 
 menu "Multimedia Capabilities Port drivers"
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 3afb5192e4da..6f8a9a1af20b 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -26,6 +26,8 @@ obj-$(CONFIG_TWL4030_CORE)	+= twl4030-core.o twl4030-irq.o
 
 obj-$(CONFIG_MFD_CORE)		+= mfd-core.o
 
+obj-$(CONFIG_EZX_PCAP)		+= ezx-pcap.o
+
 obj-$(CONFIG_MCP)		+= mcp-core.o
 obj-$(CONFIG_MCP_SA11X0)	+= mcp-sa11x0.o
 obj-$(CONFIG_MCP_UCB1200)	+= ucb1x00-core.o
@@ -40,4 +42,5 @@ obj-$(CONFIG_PMIC_DA903X)	+= da903x.o
 
 obj-$(CONFIG_MFD_PCF50633)	+= pcf50633-core.o
 obj-$(CONFIG_PCF50633_ADC)	+= pcf50633-adc.o
-obj-$(CONFIG_PCF50633_GPIO)	+= pcf50633-gpio.o
\ No newline at end of file
+obj-$(CONFIG_PCF50633_GPIO)	+= pcf50633-gpio.o
+obj-$(CONFIG_AB3100_CORE)	+= ab3100-core.o
diff --git a/drivers/mfd/ab3100-core.c b/drivers/mfd/ab3100-core.c
new file mode 100644
index 000000000000..13e7d7bfe85f
--- /dev/null
+++ b/drivers/mfd/ab3100-core.c
@@ -0,0 +1,991 @@
+/*
+ * Copyright (C) 2007-2009 ST-Ericsson
+ * License terms: GNU General Public License (GPL) version 2
+ * Low-level core for exclusive access to the AB3100 IC on the I2C bus
+ * and some basic chip-configuration.
+ * Author: Linus Walleij <linus.walleij@stericsson.com>
+ */
+
+#include <linux/i2c.h>
+#include <linux/mutex.h>
+#include <linux/list.h>
+#include <linux/notifier.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/device.h>
+#include <linux/interrupt.h>
+#include <linux/workqueue.h>
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+#include <linux/uaccess.h>
+#include <linux/mfd/ab3100.h>
+
+/* These are the only registers inside AB3100 used in this main file */
+
+/* Interrupt event registers */
+#define AB3100_EVENTA1		0x21
+#define AB3100_EVENTA2		0x22
+#define AB3100_EVENTA3		0x23
+
+/* AB3100 DAC converter registers */
+#define AB3100_DIS		0x00
+#define AB3100_D0C		0x01
+#define AB3100_D1C		0x02
+#define AB3100_D2C		0x03
+#define AB3100_D3C		0x04
+
+/* Chip ID register */
+#define AB3100_CID		0x20
+
+/* AB3100 interrupt registers */
+#define AB3100_IMRA1		0x24
+#define AB3100_IMRA2		0x25
+#define AB3100_IMRA3		0x26
+#define AB3100_IMRB1		0x2B
+#define AB3100_IMRB2		0x2C
+#define AB3100_IMRB3		0x2D
+
+/* System Power Monitoring and control registers */
+#define AB3100_MCA		0x2E
+#define AB3100_MCB		0x2F
+
+/* SIM power up */
+#define AB3100_SUP		0x50
+
+/*
+ * I2C communication
+ *
+ * The AB3100 is usually assigned address 0x48 (7-bit)
+ * The chip is defined in the platform i2c_board_data section.
+ */
+static unsigned short normal_i2c[] = { 0x48, I2C_CLIENT_END };
+I2C_CLIENT_INSMOD_1(ab3100);
+
+u8 ab3100_get_chip_type(struct ab3100 *ab3100)
+{
+	u8 chip = ABUNKNOWN;
+
+	switch (ab3100->chip_id & 0xf0) {
+	case  0xa0:
+		chip = AB3000;
+		break;
+	case  0xc0:
+		chip = AB3100;
+		break;
+	}
+	return chip;
+}
+EXPORT_SYMBOL(ab3100_get_chip_type);
+
+int ab3100_set_register(struct ab3100 *ab3100, u8 reg, u8 regval)
+{
+	u8 regandval[2] = {reg, regval};
+	int err;
+
+	err = mutex_lock_interruptible(&ab3100->access_mutex);
+	if (err)
+		return err;
+
+	/*
+	 * A two-byte write message with the first byte containing the register
+	 * number and the second byte containing the value to be written
+	 * effectively sets a register in the AB3100.
+	 */
+	err = i2c_master_send(ab3100->i2c_client, regandval, 2);
+	if (err < 0) {
+		dev_err(ab3100->dev,
+			"write error (write register): %d\n",
+			err);
+	} else if (err != 2) {
+		dev_err(ab3100->dev,
+			"write error (write register) "
+			"%d bytes transferred (expected 2)\n",
+			err);
+		err = -EIO;
+	} else {
+		/* All is well */
+		err = 0;
+	}
+	mutex_unlock(&ab3100->access_mutex);
+	return 0;
+}
+EXPORT_SYMBOL(ab3100_set_register);
+
+/*
+ * The test registers exist at an I2C bus address up one
+ * from the ordinary base. They are not supposed to be used
+ * in production code, but sometimes you have to do that
+ * anyway. It's currently only used from this file so declare
+ * it static and do not export.
+ */
+static int ab3100_set_test_register(struct ab3100 *ab3100,
+				    u8 reg, u8 regval)
+{
+	u8 regandval[2] = {reg, regval};
+	int err;
+
+	err = mutex_lock_interruptible(&ab3100->access_mutex);
+	if (err)
+		return err;
+
+	err = i2c_master_send(ab3100->testreg_client, regandval, 2);
+	if (err < 0) {
+		dev_err(ab3100->dev,
+			"write error (write test register): %d\n",
+			err);
+	} else if (err != 2) {
+		dev_err(ab3100->dev,
+			"write error (write test register) "
+			"%d bytes transferred (expected 2)\n",
+			err);
+		err = -EIO;
+	} else {
+		/* All is well */
+		err = 0;
+	}
+	mutex_unlock(&ab3100->access_mutex);
+
+	return err;
+}
+
+int ab3100_get_register(struct ab3100 *ab3100, u8 reg, u8 *regval)
+{
+	int err;
+
+	err = mutex_lock_interruptible(&ab3100->access_mutex);
+	if (err)
+		return err;
+
+	/*
+	 * AB3100 require an I2C "stop" command between each message, else
+	 * it will not work. The only way of achieveing this with the
+	 * message transport layer is to send the read and write messages
+	 * separately.
+	 */
+	err = i2c_master_send(ab3100->i2c_client, &reg, 1);
+	if (err < 0) {
+		dev_err(ab3100->dev,
+			"write error (send register address): %d\n",
+			err);
+		goto get_reg_out_unlock;
+	} else if (err != 1) {
+		dev_err(ab3100->dev,
+			"write error (send register address) "
+			"%d bytes transferred (expected 1)\n",
+			err);
+		err = -EIO;
+		goto get_reg_out_unlock;
+	} else {
+		/* All is well */
+		err = 0;
+	}
+
+	err = i2c_master_recv(ab3100->i2c_client, regval, 1);
+	if (err < 0) {
+		dev_err(ab3100->dev,
+			"write error (read register): %d\n",
+			err);
+		goto get_reg_out_unlock;
+	} else if (err != 1) {
+		dev_err(ab3100->dev,
+			"write error (read register) "
+			"%d bytes transferred (expected 1)\n",
+			err);
+		err = -EIO;
+		goto get_reg_out_unlock;
+	} else {
+		/* All is well */
+		err = 0;
+	}
+
+ get_reg_out_unlock:
+	mutex_unlock(&ab3100->access_mutex);
+	return err;
+}
+EXPORT_SYMBOL(ab3100_get_register);
+
+int ab3100_get_register_page(struct ab3100 *ab3100,
+			     u8 first_reg, u8 *regvals, u8 numregs)
+{
+	int err;
+
+	if (ab3100->chip_id == 0xa0 ||
+	    ab3100->chip_id == 0xa1)
+		/* These don't support paged reads */
+		return -EIO;
+
+	err = mutex_lock_interruptible(&ab3100->access_mutex);
+	if (err)
+		return err;
+
+	/*
+	 * Paged read also require an I2C "stop" command.
+	 */
+	err = i2c_master_send(ab3100->i2c_client, &first_reg, 1);
+	if (err < 0) {
+		dev_err(ab3100->dev,
+			"write error (send first register address): %d\n",
+			err);
+		goto get_reg_page_out_unlock;
+	} else if (err != 1) {
+		dev_err(ab3100->dev,
+			"write error (send first register address) "
+			"%d bytes transferred (expected 1)\n",
+			err);
+		err = -EIO;
+		goto get_reg_page_out_unlock;
+	}
+
+	err = i2c_master_recv(ab3100->i2c_client, regvals, numregs);
+	if (err < 0) {
+		dev_err(ab3100->dev,
+			"write error (read register page): %d\n",
+			err);
+		goto get_reg_page_out_unlock;
+	} else if (err != numregs) {
+		dev_err(ab3100->dev,
+			"write error (read register page) "
+			"%d bytes transferred (expected %d)\n",
+			err, numregs);
+		err = -EIO;
+		goto get_reg_page_out_unlock;
+	}
+
+	/* All is well */
+	err = 0;
+
+ get_reg_page_out_unlock:
+	mutex_unlock(&ab3100->access_mutex);
+	return err;
+}
+EXPORT_SYMBOL(ab3100_get_register_page);
+
+int ab3100_mask_and_set_register(struct ab3100 *ab3100,
+				 u8 reg, u8 andmask, u8 ormask)
+{
+	u8 regandval[2] = {reg, 0};
+	int err;
+
+	err = mutex_lock_interruptible(&ab3100->access_mutex);
+	if (err)
+		return err;
+
+	/* First read out the target register */
+	err = i2c_master_send(ab3100->i2c_client, &reg, 1);
+	if (err < 0) {
+		dev_err(ab3100->dev,
+			"write error (maskset send address): %d\n",
+			err);
+		goto get_maskset_unlock;
+	} else if (err != 1) {
+		dev_err(ab3100->dev,
+			"write error (maskset send address) "
+			"%d bytes transferred (expected 1)\n",
+			err);
+		err = -EIO;
+		goto get_maskset_unlock;
+	}
+
+	err = i2c_master_recv(ab3100->i2c_client, &regandval[1], 1);
+	if (err < 0) {
+		dev_err(ab3100->dev,
+			"write error (maskset read register): %d\n",
+			err);
+		goto get_maskset_unlock;
+	} else if (err != 1) {
+		dev_err(ab3100->dev,
+			"write error (maskset read register) "
+			"%d bytes transferred (expected 1)\n",
+			err);
+		err = -EIO;
+		goto get_maskset_unlock;
+	}
+
+	/* Modify the register */
+	regandval[1] &= andmask;
+	regandval[1] |= ormask;
+
+	/* Write the register */
+	err = i2c_master_send(ab3100->i2c_client, regandval, 2);
+	if (err < 0) {
+		dev_err(ab3100->dev,
+			"write error (write register): %d\n",
+			err);
+		goto get_maskset_unlock;
+	} else if (err != 2) {
+		dev_err(ab3100->dev,
+			"write error (write register) "
+			"%d bytes transferred (expected 2)\n",
+			err);
+		err = -EIO;
+		goto get_maskset_unlock;
+	}
+
+	/* All is well */
+	err = 0;
+
+ get_maskset_unlock:
+	mutex_unlock(&ab3100->access_mutex);
+	return err;
+}
+EXPORT_SYMBOL(ab3100_mask_and_set_register);
+
+/*
+ * Register a simple callback for handling any AB3100 events.
+ */
+int ab3100_event_register(struct ab3100 *ab3100,
+			  struct notifier_block *nb)
+{
+	return blocking_notifier_chain_register(&ab3100->event_subscribers,
+					       nb);
+}
+EXPORT_SYMBOL(ab3100_event_register);
+
+/*
+ * Remove a previously registered callback.
+ */
+int ab3100_event_unregister(struct ab3100 *ab3100,
+			    struct notifier_block *nb)
+{
+  return blocking_notifier_chain_unregister(&ab3100->event_subscribers,
+					    nb);
+}
+EXPORT_SYMBOL(ab3100_event_unregister);
+
+
+int ab3100_event_registers_startup_state_get(struct ab3100 *ab3100,
+					     u32 *fatevent)
+{
+	if (!ab3100->startup_events_read)
+		return -EAGAIN; /* Try again later */
+	*fatevent = ab3100->startup_events;
+	return 0;
+}
+EXPORT_SYMBOL(ab3100_event_registers_startup_state_get);
+
+/* Interrupt handling worker */
+static void ab3100_work(struct work_struct *work)
+{
+	struct ab3100 *ab3100 = container_of(work, struct ab3100, work);
+	u8 event_regs[3];
+	u32 fatevent;
+	int err;
+
+	err = ab3100_get_register_page(ab3100, AB3100_EVENTA1,
+				       event_regs, 3);
+	if (err)
+		goto err_event_wq;
+
+	fatevent = (event_regs[0] << 16) |
+		(event_regs[1] << 8) |
+		event_regs[2];
+
+	if (!ab3100->startup_events_read) {
+		ab3100->startup_events = fatevent;
+		ab3100->startup_events_read = true;
+	}
+	/*
+	 * The notified parties will have to mask out the events
+	 * they're interested in and react to them. They will be
+	 * notified on all events, then they use the fatevent value
+	 * to determine if they're interested.
+	 */
+	blocking_notifier_call_chain(&ab3100->event_subscribers,
+				     fatevent, NULL);
+
+	dev_dbg(ab3100->dev,
+		"IRQ Event: 0x%08x\n", fatevent);
+
+	/* By now the IRQ should be acked and deasserted so enable it again */
+	enable_irq(ab3100->i2c_client->irq);
+	return;
+
+ err_event_wq:
+	dev_dbg(ab3100->dev,
+		"error in event workqueue\n");
+	/* Enable the IRQ anyway, what choice do we have? */
+	enable_irq(ab3100->i2c_client->irq);
+	return;
+}
+
+static irqreturn_t ab3100_irq_handler(int irq, void *data)
+{
+	struct ab3100 *ab3100 = data;
+	/*
+	 * Disable the IRQ and dispatch a worker to handle the
+	 * event. Since the chip resides on I2C this is slow
+	 * stuff and we will re-enable the interrupts once th
+	 * worker has finished.
+	 */
+	disable_irq(ab3100->i2c_client->irq);
+	schedule_work(&ab3100->work);
+	return IRQ_HANDLED;
+}
+
+#ifdef CONFIG_DEBUG_FS
+/*
+ * Some debugfs entries only exposed if we're using debug
+ */
+static int ab3100_registers_print(struct seq_file *s, void *p)
+{
+	struct ab3100 *ab3100 = s->private;
+	u8 value;
+	u8 reg;
+
+	seq_printf(s, "AB3100 registers:\n");
+
+	for (reg = 0; reg < 0xff; reg++) {
+		ab3100_get_register(ab3100, reg, &value);
+		seq_printf(s, "[0x%x]:  0x%x\n", reg, value);
+	}
+	return 0;
+}
+
+static int ab3100_registers_open(struct inode *inode, struct file *file)
+{
+	return single_open(file, ab3100_registers_print, inode->i_private);
+}
+
+static const struct file_operations ab3100_registers_fops = {
+	.open = ab3100_registers_open,
+	.read = seq_read,
+	.llseek = seq_lseek,
+	.release = single_release,
+	.owner = THIS_MODULE,
+};
+
+struct ab3100_get_set_reg_priv {
+	struct ab3100 *ab3100;
+	bool mode;
+};
+
+static int ab3100_get_set_reg_open_file(struct inode *inode, struct file *file)
+{
+	file->private_data = inode->i_private;
+	return 0;
+}
+
+static int ab3100_get_set_reg(struct file *file,
+			      const char __user *user_buf,
+			      size_t count, loff_t *ppos)
+{
+	struct ab3100_get_set_reg_priv *priv = file->private_data;
+	struct ab3100 *ab3100 = priv->ab3100;
+	char buf[32];
+	int buf_size;
+	int regp;
+	unsigned long user_reg;
+	int err;
+	int i = 0;
+
+	/* Get userspace string and assure termination */
+	buf_size = min(count, (sizeof(buf)-1));
+	if (copy_from_user(buf, user_buf, buf_size))
+		return -EFAULT;
+	buf[buf_size] = 0;
+
+	/*
+	 * The idea is here to parse a string which is either
+	 * "0xnn" for reading a register, or "0xaa 0xbb" for
+	 * writing 0xbb to the register 0xaa. First move past
+	 * whitespace and then begin to parse the register.
+	 */
+	while ((i < buf_size) && (buf[i] == ' '))
+		i++;
+	regp = i;
+
+	/*
+	 * Advance pointer to end of string then terminate
+	 * the register string. This is needed to satisfy
+	 * the strict_strtoul() function.
+	 */
+	while ((i < buf_size) && (buf[i] != ' '))
+		i++;
+	buf[i] = '\0';
+
+	err = strict_strtoul(&buf[regp], 16, &user_reg);
+	if (err)
+		return err;
+	if (user_reg > 0xff)
+		return -EINVAL;
+
+	/* Either we read or we write a register here */
+	if (!priv->mode) {
+		/* Reading */
+		u8 reg = (u8) user_reg;
+		u8 regvalue;
+
+		ab3100_get_register(ab3100, reg, &regvalue);
+
+		dev_info(ab3100->dev,
+			 "debug read AB3100 reg[0x%02x]: 0x%02x\n",
+			 reg, regvalue);
+	} else {
+		int valp;
+		unsigned long user_value;
+		u8 reg = (u8) user_reg;
+		u8 value;
+		u8 regvalue;
+
+		/*
+		 * Writing, we need some value to write to
+		 * the register so keep parsing the string
+		 * from userspace.
+		 */
+		i++;
+		while ((i < buf_size) && (buf[i] == ' '))
+			i++;
+		valp = i;
+		while ((i < buf_size) && (buf[i] != ' '))
+			i++;
+		buf[i] = '\0';
+
+		err = strict_strtoul(&buf[valp], 16, &user_value);
+		if (err)
+			return err;
+		if (user_reg > 0xff)
+			return -EINVAL;
+
+		value = (u8) user_value;
+		ab3100_set_register(ab3100, reg, value);
+		ab3100_get_register(ab3100, reg, &regvalue);
+
+		dev_info(ab3100->dev,
+			 "debug write reg[0x%02x] with 0x%02x, "
+			 "after readback: 0x%02x\n",
+			 reg, value, regvalue);
+	}
+	return buf_size;
+}
+
+static const struct file_operations ab3100_get_set_reg_fops = {
+	.open = ab3100_get_set_reg_open_file,
+	.write = ab3100_get_set_reg,
+};
+
+static struct dentry *ab3100_dir;
+static struct dentry *ab3100_reg_file;
+static struct ab3100_get_set_reg_priv ab3100_get_priv;
+static struct dentry *ab3100_get_reg_file;
+static struct ab3100_get_set_reg_priv ab3100_set_priv;
+static struct dentry *ab3100_set_reg_file;
+
+static void ab3100_setup_debugfs(struct ab3100 *ab3100)
+{
+	int err;
+
+	ab3100_dir = debugfs_create_dir("ab3100", NULL);
+	if (!ab3100_dir)
+		goto exit_no_debugfs;
+
+	ab3100_reg_file = debugfs_create_file("registers",
+				S_IRUGO, ab3100_dir, ab3100,
+				&ab3100_registers_fops);
+	if (!ab3100_reg_file) {
+		err = -ENOMEM;
+		goto exit_destroy_dir;
+	}
+
+	ab3100_get_priv.ab3100 = ab3100;
+	ab3100_get_priv.mode = false;
+	ab3100_get_reg_file = debugfs_create_file("get_reg",
+				S_IWUGO, ab3100_dir, &ab3100_get_priv,
+				&ab3100_get_set_reg_fops);
+	if (!ab3100_get_reg_file) {
+		err = -ENOMEM;
+		goto exit_destroy_reg;
+	}
+
+	ab3100_set_priv.ab3100 = ab3100;
+	ab3100_set_priv.mode = true;
+	ab3100_set_reg_file = debugfs_create_file("set_reg",
+				S_IWUGO, ab3100_dir, &ab3100_set_priv,
+				&ab3100_get_set_reg_fops);
+	if (!ab3100_set_reg_file) {
+		err = -ENOMEM;
+		goto exit_destroy_get_reg;
+	}
+	return;
+
+ exit_destroy_get_reg:
+	debugfs_remove(ab3100_get_reg_file);
+ exit_destroy_reg:
+	debugfs_remove(ab3100_reg_file);
+ exit_destroy_dir:
+	debugfs_remove(ab3100_dir);
+ exit_no_debugfs:
+	return;
+}
+static inline void ab3100_remove_debugfs(void)
+{
+	debugfs_remove(ab3100_set_reg_file);
+	debugfs_remove(ab3100_get_reg_file);
+	debugfs_remove(ab3100_reg_file);
+	debugfs_remove(ab3100_dir);
+}
+#else
+static inline void ab3100_setup_debugfs(struct ab3100 *ab3100)
+{
+}
+static inline void ab3100_remove_debugfs(void)
+{
+}
+#endif
+
+/*
+ * Basic set-up, datastructure creation/destruction and I2C interface.
+ * This sets up a default config in the AB3100 chip so that it
+ * will work as expected.
+ */
+
+struct ab3100_init_setting {
+	u8 abreg;
+	u8 setting;
+};
+
+static const struct ab3100_init_setting __initdata
+ab3100_init_settings[] = {
+	{
+		.abreg = AB3100_MCA,
+		.setting = 0x01
+	}, {
+		.abreg = AB3100_MCB,
+		.setting = 0x30
+	}, {
+		.abreg = AB3100_IMRA1,
+		.setting = 0x00
+	}, {
+		.abreg = AB3100_IMRA2,
+		.setting = 0xFF
+	}, {
+		.abreg = AB3100_IMRA3,
+		.setting = 0x01
+	}, {
+		.abreg = AB3100_IMRB1,
+		.setting = 0xFF
+	}, {
+		.abreg = AB3100_IMRB2,
+		.setting = 0xFF
+	}, {
+		.abreg = AB3100_IMRB3,
+		.setting = 0xFF
+	}, {
+		.abreg = AB3100_SUP,
+		.setting = 0x00
+	}, {
+		.abreg = AB3100_DIS,
+		.setting = 0xF0
+	}, {
+		.abreg = AB3100_D0C,
+		.setting = 0x00
+	}, {
+		.abreg = AB3100_D1C,
+		.setting = 0x00
+	}, {
+		.abreg = AB3100_D2C,
+		.setting = 0x00
+	}, {
+		.abreg = AB3100_D3C,
+		.setting = 0x00
+	},
+};
+
+static int __init ab3100_setup(struct ab3100 *ab3100)
+{
+	int err = 0;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(ab3100_init_settings); i++) {
+		err = ab3100_set_register(ab3100,
+					  ab3100_init_settings[i].abreg,
+					  ab3100_init_settings[i].setting);
+		if (err)
+			goto exit_no_setup;
+	}
+
+	/*
+	 * Special trick to make the AB3100 use the 32kHz clock (RTC)
+	 * bit 3 in test registe 0x02 is a special, undocumented test
+	 * register bit that only exist in AB3100 P1E
+	 */
+	if (ab3100->chip_id == 0xc4) {
+		dev_warn(ab3100->dev,
+			 "AB3100 P1E variant detected, "
+			 "forcing chip to 32KHz\n");
+		err = ab3100_set_test_register(ab3100, 0x02, 0x08);
+	}
+
+ exit_no_setup:
+	return err;
+}
+
+/*
+ * Here we define all the platform devices that appear
+ * as children of the AB3100. These are regular platform
+ * devices with the IORESOURCE_IO .start and .end set
+ * to correspond to the internal AB3100 register range
+ * mapping to the corresponding subdevice.
+ */
+
+#define AB3100_DEVICE(devname, devid)				\
+static struct platform_device ab3100_##devname##_device = {	\
+	.name		= devid,				\
+	.id		= -1,					\
+}
+
+/*
+ * This lists all the subdevices and corresponding register
+ * ranges.
+ */
+AB3100_DEVICE(dac, "ab3100-dac");
+AB3100_DEVICE(leds, "ab3100-leds");
+AB3100_DEVICE(power, "ab3100-power");
+AB3100_DEVICE(regulators, "ab3100-regulators");
+AB3100_DEVICE(sim, "ab3100-sim");
+AB3100_DEVICE(uart, "ab3100-uart");
+AB3100_DEVICE(rtc, "ab3100-rtc");
+AB3100_DEVICE(charger, "ab3100-charger");
+AB3100_DEVICE(boost, "ab3100-boost");
+AB3100_DEVICE(adc, "ab3100-adc");
+AB3100_DEVICE(fuelgauge, "ab3100-fuelgauge");
+AB3100_DEVICE(vibrator, "ab3100-vibrator");
+AB3100_DEVICE(otp, "ab3100-otp");
+AB3100_DEVICE(codec, "ab3100-codec");
+
+static struct platform_device *
+ab3100_platform_devs[] = {
+	&ab3100_dac_device,
+	&ab3100_leds_device,
+	&ab3100_power_device,
+	&ab3100_regulators_device,
+	&ab3100_sim_device,
+	&ab3100_uart_device,
+	&ab3100_rtc_device,
+	&ab3100_charger_device,
+	&ab3100_boost_device,
+	&ab3100_adc_device,
+	&ab3100_fuelgauge_device,
+	&ab3100_vibrator_device,
+	&ab3100_otp_device,
+	&ab3100_codec_device,
+};
+
+struct ab_family_id {
+	u8	id;
+	char	*name;
+};
+
+static const struct ab_family_id ids[] __initdata = {
+	/* AB3100 */
+	{
+		.id = 0xc0,
+		.name = "P1A"
+	}, {
+		.id = 0xc1,
+		.name = "P1B"
+	}, {
+		.id = 0xc2,
+		.name = "P1C"
+	}, {
+		.id = 0xc3,
+		.name = "P1D"
+	}, {
+		.id = 0xc4,
+		.name = "P1E"
+	}, {
+		.id = 0xc5,
+		.name = "P1F/R1A"
+	}, {
+		.id = 0xc6,
+		.name = "P1G/R1A"
+	}, {
+		.id = 0xc7,
+		.name = "P2A/R2A"
+	}, {
+		.id = 0xc8,
+		.name = "P2B/R2B"
+	},
+	/* AB3000 variants, not supported */
+	{
+		.id = 0xa0
+	}, {
+		.id = 0xa1
+	}, {
+		.id = 0xa2
+	}, {
+		.id = 0xa3
+	}, {
+		.id = 0xa4
+	}, {
+		.id = 0xa5
+	}, {
+		.id = 0xa6
+	}, {
+		.id = 0xa7
+	},
+	/* Terminator */
+	{
+		.id = 0x00,
+	},
+};
+
+static int __init ab3100_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	struct ab3100 *ab3100;
+	int err;
+	int i;
+
+	ab3100 = kzalloc(sizeof(struct ab3100), GFP_KERNEL);
+	if (!ab3100) {
+		dev_err(&client->dev, "could not allocate AB3100 device\n");
+		return -ENOMEM;
+	}
+
+	/* Initialize data structure */
+	mutex_init(&ab3100->access_mutex);
+	BLOCKING_INIT_NOTIFIER_HEAD(&ab3100->event_subscribers);
+
+	ab3100->i2c_client = client;
+	ab3100->dev = &ab3100->i2c_client->dev;
+
+	i2c_set_clientdata(client, ab3100);
+
+	/* Read chip ID register */
+	err = ab3100_get_register(ab3100, AB3100_CID,
+				  &ab3100->chip_id);
+	if (err) {
+		dev_err(&client->dev,
+			"could not communicate with the AB3100 analog "
+			"baseband chip\n");
+		goto exit_no_detect;
+	}
+
+	for (i = 0; ids[i].id != 0x0; i++) {
+		if (ids[i].id == ab3100->chip_id) {
+			if (ids[i].name != NULL) {
+				snprintf(&ab3100->chip_name[0],
+					 sizeof(ab3100->chip_name) - 1,
+					 "AB3100 %s",
+					 ids[i].name);
+				break;
+			} else {
+				dev_err(&client->dev,
+					"AB3000 is not supported\n");
+				goto exit_no_detect;
+			}
+		}
+	}
+
+	if (ids[i].id == 0x0) {
+		dev_err(&client->dev, "unknown analog baseband chip id: 0x%x\n",
+			ab3100->chip_id);
+		dev_err(&client->dev, "accepting it anyway. Please update "
+			"the driver.\n");
+		goto exit_no_detect;
+	}
+
+	dev_info(&client->dev, "Detected chip: %s\n",
+		 &ab3100->chip_name[0]);
+
+	/* Attach a second dummy i2c_client to the test register address */
+	ab3100->testreg_client = i2c_new_dummy(client->adapter,
+						     client->addr + 1);
+	if (!ab3100->testreg_client) {
+		err = -ENOMEM;
+		goto exit_no_testreg_client;
+	}
+
+	strlcpy(ab3100->testreg_client->name, id->name,
+		sizeof(ab3100->testreg_client->name));
+
+	err = ab3100_setup(ab3100);
+	if (err)
+		goto exit_no_setup;
+
+	INIT_WORK(&ab3100->work, ab3100_work);
+
+	/* This real unpredictable IRQ is of course sampled for entropy */
+	err = request_irq(client->irq, ab3100_irq_handler,
+			  IRQF_DISABLED | IRQF_SAMPLE_RANDOM,
+			  "AB3100 IRQ", ab3100);
+	if (err)
+		goto exit_no_irq;
+
+	/* Set parent and a pointer back to the container in device data */
+	for (i = 0; i < ARRAY_SIZE(ab3100_platform_devs); i++) {
+		ab3100_platform_devs[i]->dev.parent =
+			&client->dev;
+		platform_set_drvdata(ab3100_platform_devs[i], ab3100);
+	}
+
+	/* Register the platform devices */
+	platform_add_devices(ab3100_platform_devs,
+			     ARRAY_SIZE(ab3100_platform_devs));
+
+	ab3100_setup_debugfs(ab3100);
+
+	return 0;
+
+ exit_no_irq:
+ exit_no_setup:
+	i2c_unregister_device(ab3100->testreg_client);
+ exit_no_testreg_client:
+ exit_no_detect:
+	kfree(ab3100);
+	return err;
+}
+
+static int __exit ab3100_remove(struct i2c_client *client)
+{
+	struct ab3100 *ab3100 = i2c_get_clientdata(client);
+	int i;
+
+	/* Unregister subdevices */
+	for (i = 0; i < ARRAY_SIZE(ab3100_platform_devs); i++)
+		platform_device_unregister(ab3100_platform_devs[i]);
+
+	ab3100_remove_debugfs();
+	i2c_unregister_device(ab3100->testreg_client);
+
+	/*
+	 * At this point, all subscribers should have unregistered
+	 * their notifiers so deactivate IRQ
+	 */
+	free_irq(client->irq, ab3100);
+	kfree(ab3100);
+	return 0;
+}
+
+static const struct i2c_device_id ab3100_id[] = {
+	{ "ab3100", ab3100 },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, ab3100_id);
+
+static struct i2c_driver ab3100_driver = {
+	.driver = {
+		.name	= "ab3100",
+		.owner	= THIS_MODULE,
+	},
+	.id_table	= ab3100_id,
+	.probe		= ab3100_probe,
+	.remove		= __exit_p(ab3100_remove),
+};
+
+static int __init ab3100_i2c_init(void)
+{
+	return i2c_add_driver(&ab3100_driver);
+}
+
+static void __exit ab3100_i2c_exit(void)
+{
+	i2c_del_driver(&ab3100_driver);
+}
+
+subsys_initcall(ab3100_i2c_init);
+module_exit(ab3100_i2c_exit);
+
+MODULE_AUTHOR("Linus Walleij <linus.walleij@stericsson.com>");
+MODULE_DESCRIPTION("AB3100 core driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/asic3.c b/drivers/mfd/asic3.c
index 9e485459f63b..63a2a6632106 100644
--- a/drivers/mfd/asic3.c
+++ b/drivers/mfd/asic3.c
@@ -17,6 +17,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/delay.h>
 #include <linux/irq.h>
 #include <linux/gpio.h>
 #include <linux/io.h>
@@ -24,6 +25,51 @@
 #include <linux/platform_device.h>
 
 #include <linux/mfd/asic3.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/ds1wm.h>
+#include <linux/mfd/tmio.h>
+
+enum {
+	ASIC3_CLOCK_SPI,
+	ASIC3_CLOCK_OWM,
+	ASIC3_CLOCK_PWM0,
+	ASIC3_CLOCK_PWM1,
+	ASIC3_CLOCK_LED0,
+	ASIC3_CLOCK_LED1,
+	ASIC3_CLOCK_LED2,
+	ASIC3_CLOCK_SD_HOST,
+	ASIC3_CLOCK_SD_BUS,
+	ASIC3_CLOCK_SMBUS,
+	ASIC3_CLOCK_EX0,
+	ASIC3_CLOCK_EX1,
+};
+
+struct asic3_clk {
+	int enabled;
+	unsigned int cdex;
+	unsigned long rate;
+};
+
+#define INIT_CDEX(_name, _rate)	\
+	[ASIC3_CLOCK_##_name] = {		\
+		.cdex = CLOCK_CDEX_##_name,	\
+		.rate = _rate,			\
+	}
+
+struct asic3_clk asic3_clk_init[] __initdata = {
+	INIT_CDEX(SPI, 0),
+	INIT_CDEX(OWM, 5000000),
+	INIT_CDEX(PWM0, 0),
+	INIT_CDEX(PWM1, 0),
+	INIT_CDEX(LED0, 0),
+	INIT_CDEX(LED1, 0),
+	INIT_CDEX(LED2, 0),
+	INIT_CDEX(SD_HOST, 24576000),
+	INIT_CDEX(SD_BUS, 12288000),
+	INIT_CDEX(SMBUS, 0),
+	INIT_CDEX(EX0, 32768),
+	INIT_CDEX(EX1, 24576000),
+};
 
 struct asic3 {
 	void __iomem *mapping;
@@ -34,6 +80,8 @@ struct asic3 {
 	u16 irq_bothedge[4];
 	struct gpio_chip gpio;
 	struct device *dev;
+
+	struct asic3_clk clocks[ARRAY_SIZE(asic3_clk_init)];
 };
 
 static int asic3_gpio_get(struct gpio_chip *chip, unsigned offset);
@@ -52,6 +100,21 @@ static inline u32 asic3_read_register(struct asic3 *asic,
 			(reg >> asic->bus_shift));
 }
 
+void asic3_set_register(struct asic3 *asic, u32 reg, u32 bits, bool set)
+{
+	unsigned long flags;
+	u32 val;
+
+	spin_lock_irqsave(&asic->lock, flags);
+	val = asic3_read_register(asic, reg);
+	if (set)
+		val |= bits;
+	else
+		val &= ~bits;
+	asic3_write_register(asic, reg, val);
+	spin_unlock_irqrestore(&asic->lock, flags);
+}
+
 /* IRQs */
 #define MAX_ASIC_ISR_LOOPS    20
 #define ASIC3_GPIO_BASE_INCR \
@@ -525,6 +588,240 @@ static int asic3_gpio_remove(struct platform_device *pdev)
 	return gpiochip_remove(&asic->gpio);
 }
 
+static int asic3_clk_enable(struct asic3 *asic, struct asic3_clk *clk)
+{
+	unsigned long flags;
+	u32 cdex;
+
+	spin_lock_irqsave(&asic->lock, flags);
+	if (clk->enabled++ == 0) {
+		cdex = asic3_read_register(asic, ASIC3_OFFSET(CLOCK, CDEX));
+		cdex |= clk->cdex;
+		asic3_write_register(asic, ASIC3_OFFSET(CLOCK, CDEX), cdex);
+	}
+	spin_unlock_irqrestore(&asic->lock, flags);
+
+	return 0;
+}
+
+static void asic3_clk_disable(struct asic3 *asic, struct asic3_clk *clk)
+{
+	unsigned long flags;
+	u32 cdex;
+
+	WARN_ON(clk->enabled == 0);
+
+	spin_lock_irqsave(&asic->lock, flags);
+	if (--clk->enabled == 0) {
+		cdex = asic3_read_register(asic, ASIC3_OFFSET(CLOCK, CDEX));
+		cdex &= ~clk->cdex;
+		asic3_write_register(asic, ASIC3_OFFSET(CLOCK, CDEX), cdex);
+	}
+	spin_unlock_irqrestore(&asic->lock, flags);
+}
+
+/* MFD cells (SPI, PWM, LED, DS1WM, MMC) */
+static struct ds1wm_driver_data ds1wm_pdata = {
+	.active_high = 1,
+};
+
+static struct resource ds1wm_resources[] = {
+	{
+		.start = ASIC3_OWM_BASE,
+		.end   = ASIC3_OWM_BASE + 0x13,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = ASIC3_IRQ_OWM,
+		.start = ASIC3_IRQ_OWM,
+		.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
+	},
+};
+
+static int ds1wm_enable(struct platform_device *pdev)
+{
+	struct asic3 *asic = dev_get_drvdata(pdev->dev.parent);
+
+	/* Turn on external clocks and the OWM clock */
+	asic3_clk_enable(asic, &asic->clocks[ASIC3_CLOCK_EX0]);
+	asic3_clk_enable(asic, &asic->clocks[ASIC3_CLOCK_EX1]);
+	asic3_clk_enable(asic, &asic->clocks[ASIC3_CLOCK_OWM]);
+	msleep(1);
+
+	/* Reset and enable DS1WM */
+	asic3_set_register(asic, ASIC3_OFFSET(EXTCF, RESET),
+			   ASIC3_EXTCF_OWM_RESET, 1);
+	msleep(1);
+	asic3_set_register(asic, ASIC3_OFFSET(EXTCF, RESET),
+			   ASIC3_EXTCF_OWM_RESET, 0);
+	msleep(1);
+	asic3_set_register(asic, ASIC3_OFFSET(EXTCF, SELECT),
+			   ASIC3_EXTCF_OWM_EN, 1);
+	msleep(1);
+
+	return 0;
+}
+
+static int ds1wm_disable(struct platform_device *pdev)
+{
+	struct asic3 *asic = dev_get_drvdata(pdev->dev.parent);
+
+	asic3_set_register(asic, ASIC3_OFFSET(EXTCF, SELECT),
+			   ASIC3_EXTCF_OWM_EN, 0);
+
+	asic3_clk_disable(asic, &asic->clocks[ASIC3_CLOCK_OWM]);
+	asic3_clk_disable(asic, &asic->clocks[ASIC3_CLOCK_EX0]);
+	asic3_clk_disable(asic, &asic->clocks[ASIC3_CLOCK_EX1]);
+
+	return 0;
+}
+
+static struct mfd_cell asic3_cell_ds1wm = {
+	.name          = "ds1wm",
+	.enable        = ds1wm_enable,
+	.disable       = ds1wm_disable,
+	.driver_data   = &ds1wm_pdata,
+	.num_resources = ARRAY_SIZE(ds1wm_resources),
+	.resources     = ds1wm_resources,
+};
+
+static struct tmio_mmc_data asic3_mmc_data = {
+	.hclk = 24576000,
+};
+
+static struct resource asic3_mmc_resources[] = {
+	{
+		.start = ASIC3_SD_CTRL_BASE,
+		.end   = ASIC3_SD_CTRL_BASE + 0x3ff,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = ASIC3_SD_CONFIG_BASE,
+		.end   = ASIC3_SD_CONFIG_BASE + 0x1ff,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = 0,
+		.end   = 0,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static int asic3_mmc_enable(struct platform_device *pdev)
+{
+	struct asic3 *asic = dev_get_drvdata(pdev->dev.parent);
+
+	/* Not sure if it must be done bit by bit, but leaving as-is */
+	asic3_set_register(asic, ASIC3_OFFSET(SDHWCTRL, SDCONF),
+			   ASIC3_SDHWCTRL_LEVCD, 1);
+	asic3_set_register(asic, ASIC3_OFFSET(SDHWCTRL, SDCONF),
+			   ASIC3_SDHWCTRL_LEVWP, 1);
+	asic3_set_register(asic, ASIC3_OFFSET(SDHWCTRL, SDCONF),
+			   ASIC3_SDHWCTRL_SUSPEND, 0);
+	asic3_set_register(asic, ASIC3_OFFSET(SDHWCTRL, SDCONF),
+			   ASIC3_SDHWCTRL_PCLR, 0);
+
+	asic3_clk_enable(asic, &asic->clocks[ASIC3_CLOCK_EX0]);
+	/* CLK32 used for card detection and for interruption detection
+	 * when HCLK is stopped.
+	 */
+	asic3_clk_enable(asic, &asic->clocks[ASIC3_CLOCK_EX1]);
+	msleep(1);
+
+	/* HCLK 24.576 MHz, BCLK 12.288 MHz: */
+	asic3_write_register(asic, ASIC3_OFFSET(CLOCK, SEL),
+		CLOCK_SEL_CX | CLOCK_SEL_SD_HCLK_SEL);
+
+	asic3_clk_enable(asic, &asic->clocks[ASIC3_CLOCK_SD_HOST]);
+	asic3_clk_enable(asic, &asic->clocks[ASIC3_CLOCK_SD_BUS]);
+	msleep(1);
+
+	asic3_set_register(asic, ASIC3_OFFSET(EXTCF, SELECT),
+			   ASIC3_EXTCF_SD_MEM_ENABLE, 1);
+
+	/* Enable SD card slot 3.3V power supply */
+	asic3_set_register(asic, ASIC3_OFFSET(SDHWCTRL, SDCONF),
+			   ASIC3_SDHWCTRL_SDPWR, 1);
+
+	return 0;
+}
+
+static int asic3_mmc_disable(struct platform_device *pdev)
+{
+	struct asic3 *asic = dev_get_drvdata(pdev->dev.parent);
+
+	/* Put in suspend mode */
+	asic3_set_register(asic, ASIC3_OFFSET(SDHWCTRL, SDCONF),
+			   ASIC3_SDHWCTRL_SUSPEND, 1);
+
+	/* Disable clocks */
+	asic3_clk_disable(asic, &asic->clocks[ASIC3_CLOCK_SD_HOST]);
+	asic3_clk_disable(asic, &asic->clocks[ASIC3_CLOCK_SD_BUS]);
+	asic3_clk_disable(asic, &asic->clocks[ASIC3_CLOCK_EX0]);
+	asic3_clk_disable(asic, &asic->clocks[ASIC3_CLOCK_EX1]);
+	return 0;
+}
+
+static struct mfd_cell asic3_cell_mmc = {
+	.name          = "tmio-mmc",
+	.enable        = asic3_mmc_enable,
+	.disable       = asic3_mmc_disable,
+	.driver_data   = &asic3_mmc_data,
+	.num_resources = ARRAY_SIZE(asic3_mmc_resources),
+	.resources     = asic3_mmc_resources,
+};
+
+static int __init asic3_mfd_probe(struct platform_device *pdev,
+				  struct resource *mem)
+{
+	struct asic3 *asic = platform_get_drvdata(pdev);
+	struct resource *mem_sdio;
+	int irq, ret;
+
+	mem_sdio = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+	if (!mem_sdio)
+		dev_dbg(asic->dev, "no SDIO MEM resource\n");
+
+	irq = platform_get_irq(pdev, 1);
+	if (irq < 0)
+		dev_dbg(asic->dev, "no SDIO IRQ resource\n");
+
+	/* DS1WM */
+	asic3_set_register(asic, ASIC3_OFFSET(EXTCF, SELECT),
+			   ASIC3_EXTCF_OWM_SMB, 0);
+
+	ds1wm_resources[0].start >>= asic->bus_shift;
+	ds1wm_resources[0].end   >>= asic->bus_shift;
+
+	asic3_cell_ds1wm.platform_data = &asic3_cell_ds1wm;
+	asic3_cell_ds1wm.data_size = sizeof(asic3_cell_ds1wm);
+
+	/* MMC */
+	asic3_mmc_resources[0].start >>= asic->bus_shift;
+	asic3_mmc_resources[0].end   >>= asic->bus_shift;
+	asic3_mmc_resources[1].start >>= asic->bus_shift;
+	asic3_mmc_resources[1].end   >>= asic->bus_shift;
+
+	asic3_cell_mmc.platform_data = &asic3_cell_mmc;
+	asic3_cell_mmc.data_size = sizeof(asic3_cell_mmc);
+
+	ret = mfd_add_devices(&pdev->dev, pdev->id,
+			&asic3_cell_ds1wm, 1, mem, asic->irq_base);
+	if (ret < 0)
+		goto out;
+
+	if (mem_sdio && (irq >= 0))
+		ret = mfd_add_devices(&pdev->dev, pdev->id,
+			&asic3_cell_mmc, 1, mem_sdio, irq);
+
+ out:
+	return ret;
+}
+
+static void asic3_mfd_remove(struct platform_device *pdev)
+{
+	mfd_remove_devices(&pdev->dev);
+}
 
 /* Core */
 static int __init asic3_probe(struct platform_device *pdev)
@@ -533,7 +830,6 @@ static int __init asic3_probe(struct platform_device *pdev)
 	struct asic3 *asic;
 	struct resource *mem;
 	unsigned long clksel;
-	int map_size;
 	int ret = 0;
 
 	asic = kzalloc(sizeof(struct asic3), GFP_KERNEL);
@@ -553,8 +849,7 @@ static int __init asic3_probe(struct platform_device *pdev)
 		goto out_free;
 	}
 
-	map_size = mem->end - mem->start + 1;
-	asic->mapping = ioremap(mem->start, map_size);
+	asic->mapping = ioremap(mem->start, resource_size(mem));
 	if (!asic->mapping) {
 		ret = -ENOMEM;
 		dev_err(asic->dev, "Couldn't ioremap\n");
@@ -564,7 +859,7 @@ static int __init asic3_probe(struct platform_device *pdev)
 	asic->irq_base = pdata->irq_base;
 
 	/* calculate bus shift from mem resource */
-	asic->bus_shift = 2 - (map_size >> 12);
+	asic->bus_shift = 2 - (resource_size(mem) >> 12);
 
 	clksel = 0;
 	asic3_write_register(asic, ASIC3_OFFSET(CLOCK, SEL), clksel);
@@ -590,6 +885,13 @@ static int __init asic3_probe(struct platform_device *pdev)
 		goto out_irq;
 	}
 
+	/* Making a per-device copy is only needed for the
+	 * theoretical case of multiple ASIC3s on one board:
+	 */
+	memcpy(asic->clocks, asic3_clk_init, sizeof(asic3_clk_init));
+
+	asic3_mfd_probe(pdev, mem);
+
 	dev_info(asic->dev, "ASIC3 Core driver\n");
 
 	return 0;
@@ -611,6 +913,8 @@ static int asic3_remove(struct platform_device *pdev)
 	int ret;
 	struct asic3 *asic = platform_get_drvdata(pdev);
 
+	asic3_mfd_remove(pdev);
+
 	ret = asic3_gpio_remove(pdev);
 	if (ret < 0)
 		return ret;
diff --git a/drivers/mfd/da903x.c b/drivers/mfd/da903x.c
index 7283d88656af..e5ffe5617393 100644
--- a/drivers/mfd/da903x.c
+++ b/drivers/mfd/da903x.c
@@ -561,7 +561,7 @@ static int __init da903x_init(void)
 {
 	return i2c_add_driver(&da903x_driver);
 }
-module_init(da903x_init);
+subsys_initcall(da903x_init);
 
 static void __exit da903x_exit(void)
 {
diff --git a/drivers/mfd/ezx-pcap.c b/drivers/mfd/ezx-pcap.c
new file mode 100644
index 000000000000..671a7efe86a8
--- /dev/null
+++ b/drivers/mfd/ezx-pcap.c
@@ -0,0 +1,505 @@
+/*
+ * Driver for Motorola PCAP2 as present in EZX phones
+ *
+ * Copyright (C) 2006 Harald Welte <laforge@openezx.org>
+ * Copyright (C) 2009 Daniel Ribeiro <drwyrm@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/mfd/ezx-pcap.h>
+#include <linux/spi/spi.h>
+
+#define PCAP_ADC_MAXQ		8
+struct pcap_adc_request {
+	u8 bank;
+	u8 ch[2];
+	u32 flags;
+	void (*callback)(void *, u16[]);
+	void *data;
+};
+
+struct pcap_adc_sync_request {
+	u16 res[2];
+	struct completion completion;
+};
+
+struct pcap_chip {
+	struct spi_device *spi;
+
+	/* IO */
+	u32 buf;
+	struct mutex io_mutex;
+
+	/* IRQ */
+	unsigned int irq_base;
+	u32 msr;
+	struct work_struct isr_work;
+	struct work_struct msr_work;
+	struct workqueue_struct *workqueue;
+
+	/* ADC */
+	struct pcap_adc_request *adc_queue[PCAP_ADC_MAXQ];
+	u8 adc_head;
+	u8 adc_tail;
+	struct mutex adc_mutex;
+};
+
+/* IO */
+static int ezx_pcap_putget(struct pcap_chip *pcap, u32 *data)
+{
+	struct spi_transfer t;
+	struct spi_message m;
+	int status;
+
+	memset(&t, 0, sizeof t);
+	spi_message_init(&m);
+	t.len = sizeof(u32);
+	spi_message_add_tail(&t, &m);
+
+	pcap->buf = *data;
+	t.tx_buf = (u8 *) &pcap->buf;
+	t.rx_buf = (u8 *) &pcap->buf;
+	status = spi_sync(pcap->spi, &m);
+
+	if (status == 0)
+		*data = pcap->buf;
+
+	return status;
+}
+
+int ezx_pcap_write(struct pcap_chip *pcap, u8 reg_num, u32 value)
+{
+	int ret;
+
+	mutex_lock(&pcap->io_mutex);
+	value &= PCAP_REGISTER_VALUE_MASK;
+	value |= PCAP_REGISTER_WRITE_OP_BIT
+		| (reg_num << PCAP_REGISTER_ADDRESS_SHIFT);
+	ret = ezx_pcap_putget(pcap, &value);
+	mutex_unlock(&pcap->io_mutex);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(ezx_pcap_write);
+
+int ezx_pcap_read(struct pcap_chip *pcap, u8 reg_num, u32 *value)
+{
+	int ret;
+
+	mutex_lock(&pcap->io_mutex);
+	*value = PCAP_REGISTER_READ_OP_BIT
+		| (reg_num << PCAP_REGISTER_ADDRESS_SHIFT);
+
+	ret = ezx_pcap_putget(pcap, value);
+	mutex_unlock(&pcap->io_mutex);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(ezx_pcap_read);
+
+/* IRQ */
+static inline unsigned int irq2pcap(struct pcap_chip *pcap, int irq)
+{
+	return 1 << (irq - pcap->irq_base);
+}
+
+int pcap_to_irq(struct pcap_chip *pcap, int irq)
+{
+	return pcap->irq_base + irq;
+}
+EXPORT_SYMBOL_GPL(pcap_to_irq);
+
+static void pcap_mask_irq(unsigned int irq)
+{
+	struct pcap_chip *pcap = get_irq_chip_data(irq);
+
+	pcap->msr |= irq2pcap(pcap, irq);
+	queue_work(pcap->workqueue, &pcap->msr_work);
+}
+
+static void pcap_unmask_irq(unsigned int irq)
+{
+	struct pcap_chip *pcap = get_irq_chip_data(irq);
+
+	pcap->msr &= ~irq2pcap(pcap, irq);
+	queue_work(pcap->workqueue, &pcap->msr_work);
+}
+
+static struct irq_chip pcap_irq_chip = {
+	.name	= "pcap",
+	.mask	= pcap_mask_irq,
+	.unmask	= pcap_unmask_irq,
+};
+
+static void pcap_msr_work(struct work_struct *work)
+{
+	struct pcap_chip *pcap = container_of(work, struct pcap_chip, msr_work);
+
+	ezx_pcap_write(pcap, PCAP_REG_MSR, pcap->msr);
+}
+
+static void pcap_isr_work(struct work_struct *work)
+{
+	struct pcap_chip *pcap = container_of(work, struct pcap_chip, isr_work);
+	struct pcap_platform_data *pdata = pcap->spi->dev.platform_data;
+	u32 msr, isr, int_sel, service;
+	int irq;
+
+	ezx_pcap_read(pcap, PCAP_REG_MSR, &msr);
+	ezx_pcap_read(pcap, PCAP_REG_ISR, &isr);
+
+	/* We cant service/ack irqs that are assigned to port 2 */
+	if (!(pdata->config & PCAP_SECOND_PORT)) {
+		ezx_pcap_read(pcap, PCAP_REG_INT_SEL, &int_sel);
+		isr &= ~int_sel;
+	}
+	ezx_pcap_write(pcap, PCAP_REG_ISR, isr);
+
+	local_irq_disable();
+	service = isr & ~msr;
+
+	for (irq = pcap->irq_base; service; service >>= 1, irq++) {
+		if (service & 1) {
+			struct irq_desc *desc = irq_to_desc(irq);
+
+			if (WARN(!desc, KERN_WARNING
+					"Invalid PCAP IRQ %d\n", irq))
+				break;
+
+			if (desc->status & IRQ_DISABLED)
+				note_interrupt(irq, desc, IRQ_NONE);
+			else
+				desc->handle_irq(irq, desc);
+		}
+	}
+	local_irq_enable();
+}
+
+static void pcap_irq_handler(unsigned int irq, struct irq_desc *desc)
+{
+	struct pcap_chip *pcap = get_irq_data(irq);
+
+	desc->chip->ack(irq);
+	queue_work(pcap->workqueue, &pcap->isr_work);
+	return;
+}
+
+/* ADC */
+static void pcap_disable_adc(struct pcap_chip *pcap)
+{
+	u32 tmp;
+
+	ezx_pcap_read(pcap, PCAP_REG_ADC, &tmp);
+	tmp &= ~(PCAP_ADC_ADEN|PCAP_ADC_BATT_I_ADC|PCAP_ADC_BATT_I_POLARITY);
+	ezx_pcap_write(pcap, PCAP_REG_ADC, tmp);
+}
+
+static void pcap_adc_trigger(struct pcap_chip *pcap)
+{
+	u32 tmp;
+	u8 head;
+
+	mutex_lock(&pcap->adc_mutex);
+	head = pcap->adc_head;
+	if (!pcap->adc_queue[head]) {
+		/* queue is empty, save power */
+		pcap_disable_adc(pcap);
+		mutex_unlock(&pcap->adc_mutex);
+		return;
+	}
+	mutex_unlock(&pcap->adc_mutex);
+
+	/* start conversion on requested bank */
+	tmp = pcap->adc_queue[head]->flags | PCAP_ADC_ADEN;
+
+	if (pcap->adc_queue[head]->bank == PCAP_ADC_BANK_1)
+		tmp |= PCAP_ADC_AD_SEL1;
+
+	ezx_pcap_write(pcap, PCAP_REG_ADC, tmp);
+	ezx_pcap_write(pcap, PCAP_REG_ADR, PCAP_ADR_ASC);
+}
+
+static irqreturn_t pcap_adc_irq(int irq, void *_pcap)
+{
+	struct pcap_chip *pcap = _pcap;
+	struct pcap_adc_request *req;
+	u16 res[2];
+	u32 tmp;
+
+	mutex_lock(&pcap->adc_mutex);
+	req = pcap->adc_queue[pcap->adc_head];
+
+	if (WARN(!req, KERN_WARNING "adc irq without pending request\n"))
+		return IRQ_HANDLED;
+
+	/* read requested channels results */
+	ezx_pcap_read(pcap, PCAP_REG_ADC, &tmp);
+	tmp &= ~(PCAP_ADC_ADA1_MASK | PCAP_ADC_ADA2_MASK);
+	tmp |= (req->ch[0] << PCAP_ADC_ADA1_SHIFT);
+	tmp |= (req->ch[1] << PCAP_ADC_ADA2_SHIFT);
+	ezx_pcap_write(pcap, PCAP_REG_ADC, tmp);
+	ezx_pcap_read(pcap, PCAP_REG_ADR, &tmp);
+	res[0] = (tmp & PCAP_ADR_ADD1_MASK) >> PCAP_ADR_ADD1_SHIFT;
+	res[1] = (tmp & PCAP_ADR_ADD2_MASK) >> PCAP_ADR_ADD2_SHIFT;
+
+	pcap->adc_queue[pcap->adc_head] = NULL;
+	pcap->adc_head = (pcap->adc_head + 1) & (PCAP_ADC_MAXQ - 1);
+	mutex_unlock(&pcap->adc_mutex);
+
+	/* pass the results and release memory */
+	req->callback(req->data, res);
+	kfree(req);
+
+	/* trigger next conversion (if any) on queue */
+	pcap_adc_trigger(pcap);
+
+	return IRQ_HANDLED;
+}
+
+int pcap_adc_async(struct pcap_chip *pcap, u8 bank, u32 flags, u8 ch[],
+						void *callback, void *data)
+{
+	struct pcap_adc_request *req;
+
+	/* This will be freed after we have a result */
+	req = kmalloc(sizeof(struct pcap_adc_request), GFP_KERNEL);
+	if (!req)
+		return -ENOMEM;
+
+	req->bank = bank;
+	req->flags = flags;
+	req->ch[0] = ch[0];
+	req->ch[1] = ch[1];
+	req->callback = callback;
+	req->data = data;
+
+	mutex_lock(&pcap->adc_mutex);
+	if (pcap->adc_queue[pcap->adc_tail]) {
+		mutex_unlock(&pcap->adc_mutex);
+		kfree(req);
+		return -EBUSY;
+	}
+	pcap->adc_queue[pcap->adc_tail] = req;
+	pcap->adc_tail = (pcap->adc_tail + 1) & (PCAP_ADC_MAXQ - 1);
+	mutex_unlock(&pcap->adc_mutex);
+
+	/* start conversion */
+	pcap_adc_trigger(pcap);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(pcap_adc_async);
+
+static void pcap_adc_sync_cb(void *param, u16 res[])
+{
+	struct pcap_adc_sync_request *req = param;
+
+	req->res[0] = res[0];
+	req->res[1] = res[1];
+	complete(&req->completion);
+}
+
+int pcap_adc_sync(struct pcap_chip *pcap, u8 bank, u32 flags, u8 ch[],
+								u16 res[])
+{
+	struct pcap_adc_sync_request sync_data;
+	int ret;
+
+	init_completion(&sync_data.completion);
+	ret = pcap_adc_async(pcap, bank, flags, ch, pcap_adc_sync_cb,
+								&sync_data);
+	if (ret)
+		return ret;
+	wait_for_completion(&sync_data.completion);
+	res[0] = sync_data.res[0];
+	res[1] = sync_data.res[1];
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(pcap_adc_sync);
+
+/* subdevs */
+static int pcap_remove_subdev(struct device *dev, void *unused)
+{
+	platform_device_unregister(to_platform_device(dev));
+	return 0;
+}
+
+static int __devinit pcap_add_subdev(struct pcap_chip *pcap,
+						struct pcap_subdev *subdev)
+{
+	struct platform_device *pdev;
+
+	pdev = platform_device_alloc(subdev->name, subdev->id);
+	pdev->dev.parent = &pcap->spi->dev;
+	pdev->dev.platform_data = subdev->platform_data;
+	platform_set_drvdata(pdev, pcap);
+
+	return platform_device_add(pdev);
+}
+
+static int __devexit ezx_pcap_remove(struct spi_device *spi)
+{
+	struct pcap_chip *pcap = dev_get_drvdata(&spi->dev);
+	struct pcap_platform_data *pdata = spi->dev.platform_data;
+	int i, adc_irq;
+
+	/* remove all registered subdevs */
+	device_for_each_child(&spi->dev, NULL, pcap_remove_subdev);
+
+	/* cleanup ADC */
+	adc_irq = pcap_to_irq(pcap, (pdata->config & PCAP_SECOND_PORT) ?
+				PCAP_IRQ_ADCDONE2 : PCAP_IRQ_ADCDONE);
+	free_irq(adc_irq, pcap);
+	mutex_lock(&pcap->adc_mutex);
+	for (i = 0; i < PCAP_ADC_MAXQ; i++)
+		kfree(pcap->adc_queue[i]);
+	mutex_unlock(&pcap->adc_mutex);
+
+	/* cleanup irqchip */
+	for (i = pcap->irq_base; i < (pcap->irq_base + PCAP_NIRQS); i++)
+		set_irq_chip_and_handler(i, NULL, NULL);
+
+	destroy_workqueue(pcap->workqueue);
+
+	kfree(pcap);
+
+	return 0;
+}
+
+static int __devinit ezx_pcap_probe(struct spi_device *spi)
+{
+	struct pcap_platform_data *pdata = spi->dev.platform_data;
+	struct pcap_chip *pcap;
+	int i, adc_irq;
+	int ret = -ENODEV;
+
+	/* platform data is required */
+	if (!pdata)
+		goto ret;
+
+	pcap = kzalloc(sizeof(*pcap), GFP_KERNEL);
+	if (!pcap) {
+		ret = -ENOMEM;
+		goto ret;
+	}
+
+	mutex_init(&pcap->io_mutex);
+	mutex_init(&pcap->adc_mutex);
+	INIT_WORK(&pcap->isr_work, pcap_isr_work);
+	INIT_WORK(&pcap->msr_work, pcap_msr_work);
+	dev_set_drvdata(&spi->dev, pcap);
+
+	/* setup spi */
+	spi->bits_per_word = 32;
+	spi->mode = SPI_MODE_0 | (pdata->config & PCAP_CS_AH ? SPI_CS_HIGH : 0);
+	ret = spi_setup(spi);
+	if (ret)
+		goto free_pcap;
+
+	pcap->spi = spi;
+
+	/* setup irq */
+	pcap->irq_base = pdata->irq_base;
+	pcap->workqueue = create_singlethread_workqueue("pcapd");
+	if (!pcap->workqueue) {
+		dev_err(&spi->dev, "cant create pcap thread\n");
+		goto free_pcap;
+	}
+
+	/* redirect interrupts to AP, except adcdone2 */
+	if (!(pdata->config & PCAP_SECOND_PORT))
+		ezx_pcap_write(pcap, PCAP_REG_INT_SEL,
+					(1 << PCAP_IRQ_ADCDONE2));
+
+	/* setup irq chip */
+	for (i = pcap->irq_base; i < (pcap->irq_base + PCAP_NIRQS); i++) {
+		set_irq_chip_and_handler(i, &pcap_irq_chip, handle_simple_irq);
+		set_irq_chip_data(i, pcap);
+#ifdef CONFIG_ARM
+		set_irq_flags(i, IRQF_VALID);
+#else
+		set_irq_noprobe(i);
+#endif
+	}
+
+	/* mask/ack all PCAP interrupts */
+	ezx_pcap_write(pcap, PCAP_REG_MSR, PCAP_MASK_ALL_INTERRUPT);
+	ezx_pcap_write(pcap, PCAP_REG_ISR, PCAP_CLEAR_INTERRUPT_REGISTER);
+	pcap->msr = PCAP_MASK_ALL_INTERRUPT;
+
+	set_irq_type(spi->irq, IRQ_TYPE_EDGE_RISING);
+	set_irq_data(spi->irq, pcap);
+	set_irq_chained_handler(spi->irq, pcap_irq_handler);
+	set_irq_wake(spi->irq, 1);
+
+	/* ADC */
+	adc_irq = pcap_to_irq(pcap, (pdata->config & PCAP_SECOND_PORT) ?
+					PCAP_IRQ_ADCDONE2 : PCAP_IRQ_ADCDONE);
+
+	ret = request_irq(adc_irq, pcap_adc_irq, 0, "ADC", pcap);
+	if (ret)
+		goto free_irqchip;
+
+	/* setup subdevs */
+	for (i = 0; i < pdata->num_subdevs; i++) {
+		ret = pcap_add_subdev(pcap, &pdata->subdevs[i]);
+		if (ret)
+			goto remove_subdevs;
+	}
+
+	/* board specific quirks */
+	if (pdata->init)
+		pdata->init(pcap);
+
+	return 0;
+
+remove_subdevs:
+	device_for_each_child(&spi->dev, NULL, pcap_remove_subdev);
+/* free_adc: */
+	free_irq(adc_irq, pcap);
+free_irqchip:
+	for (i = pcap->irq_base; i < (pcap->irq_base + PCAP_NIRQS); i++)
+		set_irq_chip_and_handler(i, NULL, NULL);
+/* destroy_workqueue: */
+	destroy_workqueue(pcap->workqueue);
+free_pcap:
+	kfree(pcap);
+ret:
+	return ret;
+}
+
+static struct spi_driver ezxpcap_driver = {
+	.probe	= ezx_pcap_probe,
+	.remove = __devexit_p(ezx_pcap_remove),
+	.driver = {
+		.name	= "ezx-pcap",
+		.owner	= THIS_MODULE,
+	},
+};
+
+static int __init ezx_pcap_init(void)
+{
+	return spi_register_driver(&ezxpcap_driver);
+}
+
+static void __exit ezx_pcap_exit(void)
+{
+	spi_unregister_driver(&ezxpcap_driver);
+}
+
+module_init(ezx_pcap_init);
+module_exit(ezx_pcap_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Daniel Ribeiro / Harald Welte");
+MODULE_DESCRIPTION("Motorola PCAP2 ASIC Driver");
diff --git a/drivers/mfd/pcf50633-core.c b/drivers/mfd/pcf50633-core.c
index 082c197ab9b8..8d3c38bf9714 100644
--- a/drivers/mfd/pcf50633-core.c
+++ b/drivers/mfd/pcf50633-core.c
@@ -705,5 +705,5 @@ MODULE_DESCRIPTION("I2C chip driver for NXP PCF50633 PMU");
 MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>");
 MODULE_LICENSE("GPL");
 
-module_init(pcf50633_init);
+subsys_initcall(pcf50633_init);
 module_exit(pcf50633_exit);
diff --git a/drivers/mfd/pcf50633-gpio.c b/drivers/mfd/pcf50633-gpio.c
index 2fa2eca5c9cc..9ab19a8f669d 100644
--- a/drivers/mfd/pcf50633-gpio.c
+++ b/drivers/mfd/pcf50633-gpio.c
@@ -15,6 +15,7 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/module.h>
 
 #include <linux/mfd/pcf50633/core.h>
 #include <linux/mfd/pcf50633/gpio.h>
@@ -116,3 +117,5 @@ int pcf50633_gpio_power_supply_set(struct pcf50633 *pcf,
 	return pcf50633_reg_set_bit_mask(pcf, reg, mask, val);
 }
 EXPORT_SYMBOL_GPL(pcf50633_gpio_power_supply_set);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/t7l66xb.c b/drivers/mfd/t7l66xb.c
index 875f7a875734..0a255c1f1ce7 100644
--- a/drivers/mfd/t7l66xb.c
+++ b/drivers/mfd/t7l66xb.c
@@ -108,7 +108,7 @@ static int t7l66xb_mmc_disable(struct platform_device *mmc)
 
 /*--------------------------------------------------------------------------*/
 
-static const struct tmio_mmc_data t7166xb_mmc_data = {
+static struct tmio_mmc_data t7166xb_mmc_data = {
 	.hclk = 24000000,
 };
 
diff --git a/drivers/mfd/tc6387xb.c b/drivers/mfd/tc6387xb.c
index c3993ac20542..3280ab33f88a 100644
--- a/drivers/mfd/tc6387xb.c
+++ b/drivers/mfd/tc6387xb.c
@@ -75,7 +75,7 @@ static int tc6387xb_mmc_disable(struct platform_device *mmc)
 
 /*--------------------------------------------------------------------------*/
 
-const static struct tmio_mmc_data tc6387xb_mmc_data = {
+static struct tmio_mmc_data tc6387xb_mmc_data = {
 	.hclk = 24000000,
 };
 
diff --git a/drivers/mfd/tc6393xb.c b/drivers/mfd/tc6393xb.c
index 9d2abb5d6e2c..1429a7341a9a 100644
--- a/drivers/mfd/tc6393xb.c
+++ b/drivers/mfd/tc6393xb.c
@@ -136,7 +136,7 @@ static int tc6393xb_nand_enable(struct platform_device *nand)
 	return 0;
 }
 
-const static struct tmio_mmc_data tc6393xb_mmc_data = {
+static struct tmio_mmc_data tc6393xb_mmc_data = {
 	.hclk = 24000000,
 };
 
diff --git a/drivers/mfd/twl4030-core.c b/drivers/mfd/twl4030-core.c
index ec90e953adce..cd1008c19cd7 100644
--- a/drivers/mfd/twl4030-core.c
+++ b/drivers/mfd/twl4030-core.c
@@ -647,7 +647,7 @@ static inline int __init unprotect_pm_master(void)
 	return e;
 }
 
-static void __init clocks_init(struct device *dev)
+static void clocks_init(struct device *dev)
 {
 	int e = 0;
 	struct clk *osc;
diff --git a/drivers/mfd/twl4030-irq.c b/drivers/mfd/twl4030-irq.c
index aca2670afd78..bae61b22501c 100644
--- a/drivers/mfd/twl4030-irq.c
+++ b/drivers/mfd/twl4030-irq.c
@@ -255,7 +255,7 @@ static int twl4030_irq_thread(void *data)
  * thread.  All we do here is acknowledge and mask the interrupt and wakeup
  * the kernel thread.
  */
-static void handle_twl4030_pih(unsigned int irq, irq_desc_t *desc)
+static void handle_twl4030_pih(unsigned int irq, struct irq_desc *desc)
 {
 	/* Acknowledge, clear *AND* mask the interrupt... */
 	desc->chip->ack(irq);
diff --git a/drivers/mfd/wm8350-regmap.c b/drivers/mfd/wm8350-regmap.c
index 9a4cc954cb7c..7ccc1eab98ab 100644
--- a/drivers/mfd/wm8350-regmap.c
+++ b/drivers/mfd/wm8350-regmap.c
@@ -3186,7 +3186,7 @@ const struct wm8350_reg_access wm8350_reg_io_map[] = {
 	/*  read    write volatile */
 	{ 0xFFFF, 0xFFFF, 0xFFFF }, /* R0   - Reset/ID */
 	{ 0x7CFF, 0x0C00, 0x7FFF }, /* R1   - ID */
-	{ 0x0000, 0x0000, 0x0000 }, /* R2 */
+	{ 0x007F, 0x0000, 0x0000 }, /* R2   - ROM Mask ID */
 	{ 0xBE3B, 0xBE3B, 0x8000 }, /* R3   - System Control 1 */
 	{ 0xFEF7, 0xFEF7, 0xF800 }, /* R4   - System Control 2 */
 	{ 0x80FF, 0x80FF, 0x8000 }, /* R5   - System Hibernate */
@@ -3411,7 +3411,7 @@ const struct wm8350_reg_access wm8350_reg_io_map[] = {
 	{ 0x0000, 0x0000, 0x0000 }, /* R224 */
 	{ 0x8F3F, 0x0000, 0xFFFF }, /* R225 - DCDC/LDO status */
 	{ 0x0000, 0x0000, 0xFFFF }, /* R226 - Charger status */
-	{ 0x0000, 0x0000, 0xFFFF }, /* R227 */
+	{ 0x34FE, 0x0000, 0xFFFF }, /* R227 */
 	{ 0x0000, 0x0000, 0x0000 }, /* R228 */
 	{ 0x0000, 0x0000, 0x0000 }, /* R229 */
 	{ 0xFFFF, 0x1FFF, 0xFFFF }, /* R230 - GPIO Pin Status */
diff --git a/drivers/mfd/wm8400-core.c b/drivers/mfd/wm8400-core.c
index 7c21bf791569..ecfc8bbe89b9 100644
--- a/drivers/mfd/wm8400-core.c
+++ b/drivers/mfd/wm8400-core.c
@@ -460,7 +460,7 @@ static int __init wm8400_module_init(void)
 
 	return ret;
 }
-module_init(wm8400_module_init);
+subsys_initcall(wm8400_module_init);
 
 static void __exit wm8400_module_exit(void)
 {