iio: pressure: bmp280: Remove, add and update error messages

Remove duplicate error messages, add missing error messages and
update redundant ones.

Add one missing error check.

Signed-off-by: Vasileios Amoiridis <vassilisamir@gmail.com>
Link: https://lore.kernel.org/r/20240508165207.145554-3-vassilisamir@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

1 files changed, 38 insertions, 17 deletions

diff --git a/drivers/iio/pressure/bmp280-core.c b/drivers/iio/pressure/bmp280-core.c
index 311a011604da..0aa16fb135c1 100644
--- a/drivers/iio/pressure/bmp280-core.c
+++ b/drivers/iio/pressure/bmp280-core.c
@@ -222,10 +222,8 @@ static int bme280_read_calib(struct bmp280_data *data)
 
 	/* Load shared calibration params with bmp280 first */
 	ret = bmp280_read_calib(data);
-	if  (ret < 0) {
-		dev_err(dev, "failed to read calibration parameters\n");
+	if  (ret < 0)
 		return ret;
-	}
 
 	/*
 	 * Read humidity calibration values.
@@ -841,8 +839,10 @@ static int bme280_chip_config(struct bmp280_data *data)
 	 */
 	ret = regmap_update_bits(data->regmap, BME280_REG_CTRL_HUMIDITY,
 				 BME280_OSRS_HUMIDITY_MASK, osrs);
-	if (ret < 0)
+	if (ret < 0) {
+		dev_err(data->dev, "failed to set humidity oversampling");
 		return ret;
+	}
 
 	return bmp280_chip_config(data);
 }
@@ -1071,7 +1071,7 @@ static int bmp380_read_calib(struct bmp280_data *data)
 			       sizeof(data->bmp380_cal_buf));
 	if (ret) {
 		dev_err(data->dev,
-			"failed to read temperature calibration parameters\n");
+			"failed to read calibration parameters\n");
 		return ret;
 	}
 
@@ -1609,20 +1609,24 @@ static int bmp580_preinit(struct bmp280_data *data)
 
 	/* Post powerup sequence */
 	ret = regmap_read(data->regmap, BMP580_REG_CHIP_ID, &reg);
-	if (ret)
+	if (ret) {
+		dev_err(data->dev, "failed to establish comms with the chip\n");
 		return ret;
+	}
 
 	/* Print warn message if we don't know the chip id */
 	if (reg != BMP580_CHIP_ID && reg != BMP580_CHIP_ID_ALT)
-		dev_warn(data->dev, "preinit: unexpected chip_id\n");
+		dev_warn(data->dev, "unexpected chip_id\n");
 
 	ret = regmap_read(data->regmap, BMP580_REG_STATUS, &reg);
-	if (ret)
+	if (ret) {
+		dev_err(data->dev, "failed to read nvm status\n");
 		return ret;
+	}
 
 	/* Check nvm status */
 	if (!(reg & BMP580_STATUS_NVM_RDY_MASK) || (reg & BMP580_STATUS_NVM_ERR_MASK)) {
-		dev_err(data->dev, "preinit: nvm error on powerup sequence\n");
+		dev_err(data->dev, "nvm error on powerup sequence\n");
 		return -EIO;
 	}
 
@@ -1657,6 +1661,10 @@ static int bmp580_chip_config(struct bmp280_data *data)
 				 BMP580_DSP_COMP_MASK |
 				 BMP580_DSP_SHDW_IIR_TEMP_EN |
 				 BMP580_DSP_SHDW_IIR_PRESS_EN, reg_val);
+	if (ret) {
+		dev_err(data->dev, "failed to change DSP mode settings\n");
+		return ret;
+	}
 
 	/* Configure oversampling */
 	reg_val = FIELD_PREP(BMP580_OSR_TEMP_MASK, data->oversampling_temp) |
@@ -1778,8 +1786,10 @@ static int bmp180_wait_for_eoc(struct bmp280_data *data, u8 ctrl_meas)
 		reinit_completion(&data->done);
 
 	ret = regmap_write(data->regmap, BMP280_REG_CTRL_MEAS, ctrl_meas);
-	if (ret)
+	if (ret) {
+		dev_err(data->dev, "failed to write crtl_meas register\n");
 		return ret;
+	}
 
 	if (data->use_eoc) {
 		/*
@@ -1802,12 +1812,16 @@ static int bmp180_wait_for_eoc(struct bmp280_data *data, u8 ctrl_meas)
 	}
 
 	ret = regmap_read(data->regmap, BMP280_REG_CTRL_MEAS, &ctrl);
-	if (ret)
+	if (ret) {
+		dev_err(data->dev, "failed to read ctrl_meas register\n");
 		return ret;
+	}
 
 	/* The value of this bit reset to "0" after conversion is complete */
-	if (ctrl & BMP180_MEAS_SCO)
+	if (ctrl & BMP180_MEAS_SCO) {
+		dev_err(data->dev, "conversion didn't complete\n");
 		return -EIO;
+	}
 
 	return 0;
 }
@@ -1824,8 +1838,10 @@ static int bmp180_read_adc_temp(struct bmp280_data *data, int *val)
 
 	ret = regmap_bulk_read(data->regmap, BMP180_REG_OUT_MSB,
 			       &data->be16, sizeof(data->be16));
-	if (ret)
+	if (ret) {
+		dev_err(data->dev, "failed to read temperature\n");
 		return ret;
+	}
 
 	*val = be16_to_cpu(data->be16);
 
@@ -1840,9 +1856,10 @@ static int bmp180_read_calib(struct bmp280_data *data)
 
 	ret = regmap_bulk_read(data->regmap, BMP180_REG_CALIB_START,
 			       data->bmp180_cal_buf, sizeof(data->bmp180_cal_buf));
-
-	if (ret < 0)
+	if (ret < 0) {
+		dev_err(data->dev, "failed to read calibration parameters\n");
 		return ret;
+	}
 
 	/* None of the words has the value 0 or 0xFFFF */
 	for (i = 0; i < ARRAY_SIZE(data->bmp180_cal_buf); i++) {
@@ -1925,8 +1942,10 @@ static int bmp180_read_adc_press(struct bmp280_data *data, int *val)
 
 	ret = regmap_bulk_read(data->regmap, BMP180_REG_OUT_MSB,
 			       data->buf, sizeof(data->buf));
-	if (ret)
+	if (ret) {
+		dev_err(data->dev, "failed to read pressure\n");
 		return ret;
+	}
 
 	*val = get_unaligned_be24(data->buf) >> (8 - oss);
 
@@ -2158,8 +2177,10 @@ int bmp280_common_probe(struct device *dev,
 	data->regmap = regmap;
 
 	ret = regmap_read(regmap, data->chip_info->id_reg, &chip_id);
-	if (ret < 0)
+	if (ret < 0) {
+		dev_err(data->dev, "failed to read chip id\n");
 		return ret;
+	}
 
 	for (i = 0; i < data->chip_info->num_chip_id; i++) {
 		if (chip_id == data->chip_info->chip_id[i]) {