Merge ../bleed-2.6

37 files changed, 458 insertions, 32 deletions

diff --git a/include/asm-arm/arch-aaec2000/aaec2000.h b/include/asm-arm/arch-aaec2000/aaec2000.h
index 0e9b7e18af05..002227924b9f 100644
--- a/include/asm-arm/arch-aaec2000/aaec2000.h
+++ b/include/asm-arm/arch-aaec2000/aaec2000.h
@@ -17,6 +17,16 @@
 #error You must include hardware.h not this file
 #endif /* __ASM_ARCH_HARDWARE_H */
 
+/* Chip selects */
+#define AAEC_CS0	0x00000000
+#define AAEC_CS1	0x10000000
+#define AAEC_CS2	0x20000000
+#define AAEC_CS3	0x30000000
+
+/* Flash */
+#define AAEC_FLASH_BASE	AAEC_CS0
+#define AAEC_FLASH_SIZE	SZ_64M
+
 /* Interrupt controller */
 #define IRQ_BASE	__REG(0x80000500)
 #define IRQ_INTSR	__REG(0x80000500)	/* Int Status Register */
@@ -148,4 +158,50 @@
 #define POWER_STFCLR	__REG(0x8000041c) /* NbFlg, RSTFlg, PFFlg, CLDFlg Clear */
 #define POWER_CLKSET	__REG(0x80000420) /* Clock Speed Control */
 
+/* GPIO Registers */
+#define AAEC_GPIO_PHYS	0x80000e00
+
+#define AAEC_GPIO_PADR		__REG(AAEC_GPIO_PHYS + 0x00)
+#define AAEC_GPIO_PBDR		__REG(AAEC_GPIO_PHYS + 0x04)
+#define AAEC_GPIO_PCDR		__REG(AAEC_GPIO_PHYS + 0x08)
+#define AAEC_GPIO_PDDR		__REG(AAEC_GPIO_PHYS + 0x0c)
+#define AAEC_GPIO_PADDR		__REG(AAEC_GPIO_PHYS + 0x10)
+#define AAEC_GPIO_PBDDR		__REG(AAEC_GPIO_PHYS + 0x14)
+#define AAEC_GPIO_PCDDR		__REG(AAEC_GPIO_PHYS + 0x18)
+#define AAEC_GPIO_PDDDR		__REG(AAEC_GPIO_PHYS + 0x1c)
+#define AAEC_GPIO_PEDR		__REG(AAEC_GPIO_PHYS + 0x20)
+#define AAEC_GPIO_PEDDR		__REG(AAEC_GPIO_PHYS + 0x24)
+#define AAEC_GPIO_KSCAN		__REG(AAEC_GPIO_PHYS + 0x28)
+#define AAEC_GPIO_PINMUX	__REG(AAEC_GPIO_PHYS + 0x2c)
+#define AAEC_GPIO_PFDR		__REG(AAEC_GPIO_PHYS + 0x30)
+#define AAEC_GPIO_PFDDR		__REG(AAEC_GPIO_PHYS + 0x34)
+#define AAEC_GPIO_PGDR		__REG(AAEC_GPIO_PHYS + 0x38)
+#define AAEC_GPIO_PGDDR		__REG(AAEC_GPIO_PHYS + 0x3c)
+#define AAEC_GPIO_PHDR		__REG(AAEC_GPIO_PHYS + 0x40)
+#define AAEC_GPIO_PHDDR		__REG(AAEC_GPIO_PHYS + 0x44)
+#define AAEC_GPIO_RAZ		__REG(AAEC_GPIO_PHYS + 0x48)
+#define AAEC_GPIO_INTTYPE1	__REG(AAEC_GPIO_PHYS + 0x4c)
+#define AAEC_GPIO_INTTYPE2	__REG(AAEC_GPIO_PHYS + 0x50)
+#define AAEC_GPIO_FEOI		__REG(AAEC_GPIO_PHYS + 0x54)
+#define AAEC_GPIO_INTEN		__REG(AAEC_GPIO_PHYS + 0x58)
+#define AAEC_GPIO_INTSTATUS	__REG(AAEC_GPIO_PHYS + 0x5c)
+#define AAEC_GPIO_RAWINTSTATUS	__REG(AAEC_GPIO_PHYS + 0x60)
+#define AAEC_GPIO_DB		__REG(AAEC_GPIO_PHYS + 0x64)
+#define AAEC_GPIO_PAPINDR	__REG(AAEC_GPIO_PHYS + 0x68)
+#define AAEC_GPIO_PBPINDR	__REG(AAEC_GPIO_PHYS + 0x6c)
+#define AAEC_GPIO_PCPINDR	__REG(AAEC_GPIO_PHYS + 0x70)
+#define AAEC_GPIO_PDPINDR	__REG(AAEC_GPIO_PHYS + 0x74)
+#define AAEC_GPIO_PEPINDR	__REG(AAEC_GPIO_PHYS + 0x78)
+#define AAEC_GPIO_PFPINDR	__REG(AAEC_GPIO_PHYS + 0x7c)
+#define AAEC_GPIO_PGPINDR	__REG(AAEC_GPIO_PHYS + 0x80)
+#define AAEC_GPIO_PHPINDR	__REG(AAEC_GPIO_PHYS + 0x84)
+
+#define AAEC_GPIO_PINMUX_PE0CON		(1 << 0)
+#define AAEC_GPIO_PINMUX_PD0CON		(1 << 1)
+#define AAEC_GPIO_PINMUX_CODECON	(1 << 2)
+#define AAEC_GPIO_PINMUX_UART3CON	(1 << 3)
+
+/* LCD Controller */
+#define AAEC_CLCD_PHYS	0x80003000
+
 #endif /* __ARM_ARCH_AAEC2000_H */
diff --git a/include/asm-arm/arch-aaec2000/aaed2000.h b/include/asm-arm/arch-aaec2000/aaed2000.h
new file mode 100644
index 000000000000..bc76d2badb91
--- /dev/null
+++ b/include/asm-arm/arch-aaec2000/aaed2000.h
@@ -0,0 +1,40 @@
+/*
+ *  linux/include/asm-arm/arch-aaec2000/aaed2000.h
+ *
+ *  AAED-2000 specific bits definition
+ *
+ *  Copyright (c) 2005 Nicolas Bellido Y Ortega
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_AAED2000_H
+#define __ASM_ARCH_AAED2000_H
+
+/* External GPIOs. */
+
+#define EXT_GPIO_PBASE	AAEC_CS3
+#define EXT_GPIO_VBASE	0xf8100000
+#define EXT_GPIO_LENGTH	0x00001000
+
+#define __ext_gpio_p2v(x)	((x) - EXT_GPIO_PBASE + EXT_GPIO_VBASE)
+#define __ext_gpio_v2p(x)	((x) + EXT_GPIO_PBASE - EXT_GPIO_VBASE)
+
+#define __EXT_GPIO_REG(x)	(*((volatile u32 *)__ext_gpio_p2v(x)))
+#define __EXT_GPIO_PREG(x)	(__ext_gpio_v2p((u32)&(x)))
+
+#define AAED_EXT_GPIO	__EXT_GPIO_REG(EXT_GPIO_PBASE)
+
+#define AAED_EGPIO_KBD_SCAN	0x00003fff /* Keyboard scan data */
+#define AAED_EGPIO_PWR_INT	0x00008fff /* Smart battery charger interrupt */
+#define AAED_EGPIO_SWITCHED	0x000f0000 /* DIP Switches */
+#define AAED_EGPIO_USB_VBUS	0x00400000 /* USB Vbus sense */
+#define AAED_EGPIO_LCD_PWR_EN	0x02000000 /* LCD and backlight PWR enable */
+#define AAED_EGPIO_nLED0	0x20000000 /* LED 0 */
+#define AAED_EGPIO_nLED1	0x20000000 /* LED 1 */
+#define AAED_EGPIO_nLED2	0x20000000 /* LED 2 */
+
+
+#endif /* __ARM_ARCH_AAED2000_H */
diff --git a/include/asm-arm/arch-aaec2000/hardware.h b/include/asm-arm/arch-aaec2000/hardware.h
index 4c37219e030e..153506fd06ed 100644
--- a/include/asm-arm/arch-aaec2000/hardware.h
+++ b/include/asm-arm/arch-aaec2000/hardware.h
@@ -11,7 +11,8 @@
 #ifndef __ASM_ARCH_HARDWARE_H
 #define __ASM_ARCH_HARDWARE_H
 
-#include <linux/config.h>
+#include <asm/sizes.h>
+#include <asm/arch/aaec2000.h>
 
 /* The kernel is loaded at physical address 0xf8000000.
  * We map the IO space a bit after
diff --git a/include/asm-arm/arch-aaec2000/io.h b/include/asm-arm/arch-aaec2000/io.h
index c58a8d10425a..8d67907fd4f0 100644
--- a/include/asm-arm/arch-aaec2000/io.h
+++ b/include/asm-arm/arch-aaec2000/io.h
@@ -6,6 +6,8 @@
 #ifndef __ASM_ARM_ARCH_IO_H
 #define __ASM_ARM_ARCH_IO_H
 
+#include <asm/hardware.h>
+
 #define IO_SPACE_LIMIT 0xffffffff
 
 /*
diff --git a/include/asm-arm/arch-cl7500/io.h b/include/asm-arm/arch-cl7500/io.h
index f0113bc75630..89a33287f4fe 100644
--- a/include/asm-arm/arch-cl7500/io.h
+++ b/include/asm-arm/arch-cl7500/io.h
@@ -10,6 +10,8 @@
 #ifndef __ASM_ARM_ARCH_IO_H
 #define __ASM_ARM_ARCH_IO_H
 
+#include <asm/hardware.h>
+
 #define IO_SPACE_LIMIT 0xffffffff
 
 /*
diff --git a/include/asm-arm/arch-clps711x/hardware.h b/include/asm-arm/arch-clps711x/hardware.h
index 1386871e1a5a..f864c367c934 100644
--- a/include/asm-arm/arch-clps711x/hardware.h
+++ b/include/asm-arm/arch-clps711x/hardware.h
@@ -235,4 +235,121 @@
 #define CEIVA_PB0_BLK_BTN	(1<<0)
 #endif // #if defined (CONFIG_ARCH_CEIVA)
 
+#if defined (CONFIG_MACH_MP1000)
+/* NOR FLASH */
+#define MP1000_NIO_BASE		0xf9000000	/* virtual */
+#define MP1000_NIO_START	CS0_PHYS_BASE	/* physical */
+#define MP1000_NIO_SIZE		0x00400000
+
+/* DSP Interface */
+#define MP1000_DSP_BASE		0xfa000000	/* virtual */
+#define MP1000_DSP_START	CS1_PHYS_BASE	/* physical */
+#define MP1000_DSP_SIZE		0x00100000
+
+/* LCD, DAA/DSP, RTC, DAA RW Reg all in CS2 */
+#define MP1000_LIO_BASE		0xfb000000	/* virtual */
+#define MP1000_LIO_START	CS2_PHYS_BASE	/* physical */
+#define MP1000_LIO_SIZE		0x00100000
+
+/* NAND FLASH */
+#define MP1000_FIO_BASE		0xfc000000	/* virtual */
+#define MP1000_FIO_START	CS3_PHYS_BASE	/* physical */
+#define MP1000_FIO_SIZE		0x00800000
+
+/* Ethernet */
+#define MP1000_EIO_BASE		0xfd000000	/* virtual 	*/
+#define MP1000_EIO_START	CS4_PHYS_BASE	/* physical 	*/
+#define MP1000_EIO_SIZE		0x00100000
+
+#define	MP1000_LCD_OFFSET	0x00000000	/* LCD offset in CS2 */
+#define	MP1000_DDD_OFFSET	0x00001000	/* DAA/DAI/DSP sft reset offst*/
+#define	MP1000_RTC_OFFSET	0x00002000	/* RTC offset in CS2 */
+#define	MP1000_DAA_OFFSET	0x00003000	/* DAA RW reg offset in CS2 */
+
+/* IDE */
+#define MP1000_IDE_BASE		0xfe000000      /* virtual */
+#define MP1000_IDE_START	CS5_PHYS_BASE      /* physical */
+#define MP1000_IDE_SIZE		0x00100000      /* actually it's only 0x1000 */
+
+#define IRQ_HARDDISK IRQ_EINT2
+
+/*
+ * IDE registers definition
+ */
+
+#define IDE_CONTROL_BASE		(MP1000_IDE_BASE + 0x1000)
+#define IDE_BASE_OFF			(MP1000_IDE_BASE)
+
+#define IDE_WRITE_DEVICE_DATA		(IDE_BASE_OFF + 0x0)
+#define IDE_FEATURES_REGISTER		(IDE_BASE_OFF + 0x2)
+#define IDE_SECTOR_COUNT_REGISTER	(IDE_BASE_OFF + 0x4)
+#define IDE_SECTOR_NUMBER_REGISTER	(IDE_BASE_OFF + 0x6)
+#define IDE_CYLINDER_LOW_REGISTER	(IDE_BASE_OFF + 0x8)
+#define IDE_CYLINDER_HIGH_REGISTER	(IDE_BASE_OFF + 0xa)
+#define IDE_DEVICE_HEAD_REGISTER	(IDE_BASE_OFF + 0xc)
+#define IDE_COMMAND_DATA_REGISTER	(IDE_BASE_OFF + 0xe)
+#define IDE_DEVICE_CONTROL_REGISTER	(IDE_CONTROL_BASE + 0xc)
+
+#define IDE_IRQ                      IRQ_EINT2
+
+
+#define RTC_PORT(x)	(MP1000_LIO_BASE+0x2000 + (x*2))
+#define RTC_ALWAYS_BCD	0
+
+/*
+// Definitions of the bit fields in the HwPortA register for the
+// MP1000 board.
+*/
+#define HwPortAKeyboardRow1                     0x00000001
+#define HwPortAKeyboardRow2                     0x00000002
+#define HwPortAKeyboardRow3                     0x00000004
+#define HwPortAKeyboardRow4                     0x00000008
+#define HwPortAKeyboardRow5                     0x00000010
+#define HwPortAKeyboardRow6                     0x00000020
+#define HwPortALCDEnable                        0x00000040
+#define HwPortAOffhook	                        0x00000080
+
+/*
+// Definitions of the bit fields in the HwPortB register for the
+// MP1000 board.
+*/
+#define HwPortBL3Mode                           0x00000001
+#define HwPortBL3Clk                            0x00000002
+#define HwPortBSClk                             0x00000001
+#define HwPortBSData                            0x00000002
+#define HwPortBL3Data                           0x00000004
+#define HwPortBMute                             0x00000008
+#define HwPortBQD0                              0x00000010
+#define HwPortBQD1                              0x00000020
+#define HwPortBQD2                              0x00000040
+#define HwPortBQD3                              0x00000080
+
+/*
+// Definitions of the bit fields in the HwPortD register for the
+// MP1000 board.
+*/
+#define HwPortDLED1                             0x00000001
+#define HwPortDLED2                             0x00000002
+#define HwPortDLED3                             0x00000004
+#define HwPortDLED4                             0x00000008
+#define HwPortDLED5                             0x00000010
+#define HwPortDEECS                             0x00000020
+#define HwPortBRTS                              0x00000040
+#define HwPortBRI                               0x00000080
+
+
+/*
+// Definitions of the bit fields in the HwPortE register for the
+// MP1000 board.
+*/
+
+#define HwPortECLE                              0x00000001
+#define HwPortESepromDOut                       0x00000001
+#define HwPortEALE                              0x00000002
+#define HwPortESepromDIn                        0x00000002
+#define HwPortENANDCS                           0x00000004
+#define HwPortESepromCLK                        0x00000004
+
+#endif // #if defined (CONFIG_MACH_MP1000)
+
 #endif
diff --git a/include/asm-arm/arch-clps711x/io.h b/include/asm-arm/arch-clps711x/io.h
index 14d7e8da5453..62613b0e2d96 100644
--- a/include/asm-arm/arch-clps711x/io.h
+++ b/include/asm-arm/arch-clps711x/io.h
@@ -20,6 +20,8 @@
 #ifndef __ASM_ARM_ARCH_IO_H
 #define __ASM_ARM_ARCH_IO_H
 
+#include <asm/hardware.h>
+
 #define IO_SPACE_LIMIT 0xffffffff
 
 #define __io(a)			((void __iomem *)(a))
diff --git a/include/asm-arm/arch-clps711x/mp1000-seprom.h b/include/asm-arm/arch-clps711x/mp1000-seprom.h
new file mode 100644
index 000000000000..3e5566cf9666
--- /dev/null
+++ b/include/asm-arm/arch-clps711x/mp1000-seprom.h
@@ -0,0 +1,77 @@
+#ifndef MP1000_SEPROM_H
+#define MP1000_SEPROM_H
+
+/*
+ * mp1000-seprom.h
+ *
+ *
+ *  This file contains the Serial EEPROM definitions for the MP1000 board
+ *
+ *  Copyright (C) 2005 Comdial Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ */
+
+#define COMMAND_ERASE		(0x1C0)
+#define COMMAND_ERASE_ALL	(0x120)
+#define COMMAND_WRITE_DISABLE	(0x100)
+#define COMMAND_WRITE_ENABLE	(0x130)
+#define COMMAND_READ		(0x180)
+#define COMMAND_WRITE		(0x140)
+#define COMMAND_WRITE_ALL	(0x110)
+
+//
+// Serial EEPROM data format
+//
+
+#define PACKED __attribute__ ((packed))
+
+typedef struct _EEPROM {
+	union {
+		unsigned char eprom_byte_data[128];
+		unsigned short eprom_short_data[64];
+		struct {
+			unsigned char version PACKED;	// EEPROM Version "1" for now
+			unsigned char box_id PACKED; 	// Box ID (Standalone, SOHO, embedded, etc)
+			unsigned char major_hw_version PACKED;	// Major Hardware version (Hex)
+			unsigned char minor_hw_version PACKED;	// Minor Hardware Version (Hex)
+			unsigned char mfg_id[3] PACKED;	// Manufacturer ID (3 character Alphabetic)
+			unsigned char mfg_serial_number[10] PACKED;	// Manufacturer Serial number
+			unsigned char mfg_date[3] PACKED;	// Date of Mfg (Formatted YY:MM:DD)
+			unsigned char country PACKED;	// Country of deployment
+			unsigned char mac_Address[6] PACKED;	// MAC Address
+			unsigned char oem_string[20] PACKED;	// OEM ID string
+			unsigned short feature_bits1 PACKED;	// Feature Bits 1
+			unsigned short feature_bits2 PACKED;	// Feature Bits 2
+			unsigned char filler[75] PACKED;		// Unused/Undefined	“0” initialized
+			unsigned short checksum PACKED;		// byte accumulated short checksum
+		} eprom_struct;
+	} variant;
+}  eeprom_struct;
+
+/* These settings must be mutually exclusive */
+#define	FEATURE_BITS1_DRAMSIZE_16MEG	0x0001  /* 0 signifies 4 MEG system */
+#define	FEATURE_BITS1_DRAMSIZE_8MEG	0x0002  /* 1 in bit 1 = 8MEG system */
+#define	FEATURE_BITS1_DRAMSIZE_64MEG	0x0004  /* 1 in bit 2 = 64MEG system */
+
+#define FEATURE_BITS1_CPUIS90MEG     0x0010
+
+extern void seprom_init(void);
+extern eeprom_struct* get_seprom_ptr(void);
+extern unsigned char* get_eeprom_mac_address(void);
+
+#endif /* MP1000_SEPROM_H */
+
diff --git a/include/asm-arm/arch-ebsa285/io.h b/include/asm-arm/arch-ebsa285/io.h
index 70576b17f922..776f9d377057 100644
--- a/include/asm-arm/arch-ebsa285/io.h
+++ b/include/asm-arm/arch-ebsa285/io.h
@@ -14,6 +14,8 @@
 #ifndef __ASM_ARM_ARCH_IO_H
 #define __ASM_ARM_ARCH_IO_H
 
+#include <asm/hardware.h>
+
 #define IO_SPACE_LIMIT 0xffff
 
 /*
diff --git a/include/asm-arm/arch-epxa10db/io.h b/include/asm-arm/arch-epxa10db/io.h
index 1f0afa257621..9fe100c9d6be 100644
--- a/include/asm-arm/arch-epxa10db/io.h
+++ b/include/asm-arm/arch-epxa10db/io.h
@@ -20,6 +20,8 @@
 #ifndef __ASM_ARM_ARCH_IO_H
 #define __ASM_ARM_ARCH_IO_H
 
+#include <asm/hardware.h>
+
 #define IO_SPACE_LIMIT 0xffff
 
 
diff --git a/include/asm-arm/arch-h720x/io.h b/include/asm-arm/arch-h720x/io.h
index 68814828c9a7..d3ccfd8172b7 100644
--- a/include/asm-arm/arch-h720x/io.h
+++ b/include/asm-arm/arch-h720x/io.h
@@ -14,7 +14,7 @@
 #ifndef __ASM_ARM_ARCH_IO_H
 #define __ASM_ARM_ARCH_IO_H
 
-#include <asm/arch/hardware.h>
+#include <asm/hardware.h>
 
 #define IO_SPACE_LIMIT 0xffffffff
 
diff --git a/include/asm-arm/arch-imx/io.h b/include/asm-arm/arch-imx/io.h
index 28a4cca6a4cb..b191cdd05576 100644
--- a/include/asm-arm/arch-imx/io.h
+++ b/include/asm-arm/arch-imx/io.h
@@ -20,6 +20,8 @@
 #ifndef __ASM_ARM_ARCH_IO_H
 #define __ASM_ARM_ARCH_IO_H
 
+#include <asm/hardware.h>
+
 #define IO_SPACE_LIMIT 0xffffffff
 
 #define __io(a)		((void __iomem *)(a))
diff --git a/include/asm-arm/arch-integrator/hardware.h b/include/asm-arm/arch-integrator/hardware.h
index be2716eeaa02..6f0947bc500d 100644
--- a/include/asm-arm/arch-integrator/hardware.h
+++ b/include/asm-arm/arch-integrator/hardware.h
@@ -33,15 +33,6 @@
 #define IO_SIZE			0x0B000000                 // How much?
 #define IO_START		INTEGRATOR_HDR_BASE        // PA of IO
 
-/*
- * Similar to above, but for PCI addresses (memory, IO, Config and the
- * V3 chip itself).  WARNING: this has to mirror definitions in platform.h
- */
-#define PCI_MEMORY_VADDR        0xe8000000
-#define PCI_CONFIG_VADDR        0xec000000
-#define PCI_V3_VADDR            0xed000000
-#define PCI_IO_VADDR            0xee000000
-
 #define PCIO_BASE		PCI_IO_VADDR
 #define PCIMEM_BASE		PCI_MEMORY_VADDR
 
diff --git a/include/asm-arm/arch-integrator/io.h b/include/asm-arm/arch-integrator/io.h
index fbea8be67d26..31f2deab51b0 100644
--- a/include/asm-arm/arch-integrator/io.h
+++ b/include/asm-arm/arch-integrator/io.h
@@ -22,6 +22,14 @@
 
 #define IO_SPACE_LIMIT 0xffff
 
+/*
+ * WARNING: this has to mirror definitions in platform.h
+ */
+#define PCI_MEMORY_VADDR        0xe8000000
+#define PCI_CONFIG_VADDR        0xec000000
+#define PCI_V3_VADDR            0xed000000
+#define PCI_IO_VADDR            0xee000000
+
 #define __io(a)			((void __iomem *)(PCI_IO_VADDR + (a)))
 #define __mem_pci(a)		(a)
 #define __mem_isa(a)		((a) + PCI_MEMORY_VADDR)
diff --git a/include/asm-arm/arch-iop3xx/io.h b/include/asm-arm/arch-iop3xx/io.h
index 2761dfd8694d..f39046a6ab14 100644
--- a/include/asm-arm/arch-iop3xx/io.h
+++ b/include/asm-arm/arch-iop3xx/io.h
@@ -11,6 +11,8 @@
 #ifndef __ASM_ARM_ARCH_IO_H
 #define __ASM_ARM_ARCH_IO_H
 
+#include <asm/hardware.h>
+
 #define IO_SPACE_LIMIT 0xffffffff
 
 #define __io(p)			((void __iomem *)(p))
diff --git a/include/asm-arm/arch-ixp2000/io.h b/include/asm-arm/arch-ixp2000/io.h
index 3241cd6f0778..7fbcdf9931ee 100644
--- a/include/asm-arm/arch-ixp2000/io.h
+++ b/include/asm-arm/arch-ixp2000/io.h
@@ -15,6 +15,8 @@
 #ifndef __ASM_ARM_ARCH_IO_H
 #define __ASM_ARM_ARCH_IO_H
 
+#include <asm/hardware.h>
+
 #define IO_SPACE_LIMIT		0xffffffff
 #define __mem_pci(a)		(a)
 
diff --git a/include/asm-arm/arch-ixp2000/ixp2000-regs.h b/include/asm-arm/arch-ixp2000/ixp2000-regs.h
index 32aece069869..def089d693d2 100644
--- a/include/asm-arm/arch-ixp2000/ixp2000-regs.h
+++ b/include/asm-arm/arch-ixp2000/ixp2000-regs.h
@@ -392,4 +392,47 @@
 #define	WDT_RESET_ENABLE		0x01000000
 
 
+/*
+ * MSF registers.  The IXP2400 and IXP2800 have somewhat different MSF
+ * units, but the registers that differ between the two don't overlap,
+ * so we can have one register list for both.
+ */
+#define IXP2000_MSF_REG(x)			((volatile unsigned long*)(IXP2000_MSF_VIRT_BASE + (x)))
+#define IXP2000_MSF_RX_CONTROL			IXP2000_MSF_REG(0x0000)
+#define IXP2000_MSF_TX_CONTROL			IXP2000_MSF_REG(0x0004)
+#define IXP2000_MSF_INTERRUPT_STATUS		IXP2000_MSF_REG(0x0008)
+#define IXP2000_MSF_INTERRUPT_ENABLE		IXP2000_MSF_REG(0x000c)
+#define IXP2000_MSF_CSIX_TYPE_MAP		IXP2000_MSF_REG(0x0010)
+#define IXP2000_MSF_FC_EGRESS_STATUS		IXP2000_MSF_REG(0x0014)
+#define IXP2000_MSF_FC_INGRESS_STATUS		IXP2000_MSF_REG(0x0018)
+#define IXP2000_MSF_HWM_CONTROL			IXP2000_MSF_REG(0x0024)
+#define IXP2000_MSF_FC_STATUS_OVERRIDE		IXP2000_MSF_REG(0x0028)
+#define IXP2000_MSF_CLOCK_CONTROL		IXP2000_MSF_REG(0x002c)
+#define IXP2000_MSF_RX_PORT_MAP			IXP2000_MSF_REG(0x0040)
+#define IXP2000_MSF_RBUF_ELEMENT_DONE		IXP2000_MSF_REG(0x0044)
+#define IXP2000_MSF_RX_MPHY_POLL_LIMIT		IXP2000_MSF_REG(0x0048)
+#define IXP2000_MSF_RX_CALENDAR_LENGTH		IXP2000_MSF_REG(0x0048)
+#define IXP2000_MSF_RX_THREAD_FREELIST_TIMEOUT_0	IXP2000_MSF_REG(0x0050)
+#define IXP2000_MSF_RX_THREAD_FREELIST_TIMEOUT_1	IXP2000_MSF_REG(0x0054)
+#define IXP2000_MSF_RX_THREAD_FREELIST_TIMEOUT_2	IXP2000_MSF_REG(0x0058)
+#define IXP2000_MSF_TX_SEQUENCE_0		IXP2000_MSF_REG(0x0060)
+#define IXP2000_MSF_TX_SEQUENCE_1		IXP2000_MSF_REG(0x0064)
+#define IXP2000_MSF_TX_SEQUENCE_2		IXP2000_MSF_REG(0x0068)
+#define IXP2000_MSF_TX_MPHY_POLL_LIMIT		IXP2000_MSF_REG(0x0070)
+#define IXP2000_MSF_TX_CALENDAR_LENGTH		IXP2000_MSF_REG(0x0070)
+#define IXP2000_MSF_RX_UP_CONTROL_0		IXP2000_MSF_REG(0x0080)
+#define IXP2000_MSF_RX_UP_CONTROL_1		IXP2000_MSF_REG(0x0084)
+#define IXP2000_MSF_RX_UP_CONTROL_2		IXP2000_MSF_REG(0x0088)
+#define IXP2000_MSF_RX_UP_CONTROL_3		IXP2000_MSF_REG(0x008c)
+#define IXP2000_MSF_TX_UP_CONTROL_0		IXP2000_MSF_REG(0x0090)
+#define IXP2000_MSF_TX_UP_CONTROL_1		IXP2000_MSF_REG(0x0094)
+#define IXP2000_MSF_TX_UP_CONTROL_2		IXP2000_MSF_REG(0x0098)
+#define IXP2000_MSF_TX_UP_CONTROL_3		IXP2000_MSF_REG(0x009c)
+#define IXP2000_MSF_TRAIN_DATA			IXP2000_MSF_REG(0x00a0)
+#define IXP2000_MSF_TRAIN_CALENDAR		IXP2000_MSF_REG(0x00a4)
+#define IXP2000_MSF_TRAIN_FLOW_CONTROL		IXP2000_MSF_REG(0x00a8)
+#define IXP2000_MSF_TX_CALENDAR_0		IXP2000_MSF_REG(0x1000)
+#define IXP2000_MSF_RX_PORT_CALENDAR_STATUS	IXP2000_MSF_REG(0x1400)
+
+
 #endif				/* _IXP2000_H_ */
diff --git a/include/asm-arm/arch-l7200/io.h b/include/asm-arm/arch-l7200/io.h
index fc012a39e2cb..cab8ad0adf09 100644
--- a/include/asm-arm/arch-l7200/io.h
+++ b/include/asm-arm/arch-l7200/io.h
@@ -10,7 +10,7 @@
 #ifndef __ASM_ARM_ARCH_IO_H
 #define __ASM_ARM_ARCH_IO_H
 
-#include <asm/arch/hardware.h>
+#include <asm/hardware.h>
 
 #define IO_SPACE_LIMIT 0xffffffff
 
diff --git a/include/asm-arm/arch-lh7a40x/io.h b/include/asm-arm/arch-lh7a40x/io.h
index c13bdd9add92..bbcd4335f441 100644
--- a/include/asm-arm/arch-lh7a40x/io.h
+++ b/include/asm-arm/arch-lh7a40x/io.h
@@ -11,6 +11,8 @@
 #ifndef __ASM_ARCH_IO_H
 #define __ASM_ARCH_IO_H
 
+#include <asm/hardware.h>
+
 #define IO_SPACE_LIMIT 0xffffffff
 
 /* No ISA or PCI bus on this machine. */
diff --git a/include/asm-arm/arch-omap/io.h b/include/asm-arm/arch-omap/io.h
index 11fbf629bf75..3d5bcd545082 100644
--- a/include/asm-arm/arch-omap/io.h
+++ b/include/asm-arm/arch-omap/io.h
@@ -34,6 +34,8 @@
 #ifndef __ASM_ARM_ARCH_IO_H
 #define __ASM_ARM_ARCH_IO_H
 
+#include <asm/hardware.h>
+
 #define IO_SPACE_LIMIT 0xffffffff
 
 /*
diff --git a/include/asm-arm/arch-pxa/hardware.h b/include/asm-arm/arch-pxa/hardware.h
index cf35721cfa45..3e70bd95472c 100644
--- a/include/asm-arm/arch-pxa/hardware.h
+++ b/include/asm-arm/arch-pxa/hardware.h
@@ -44,12 +44,12 @@
 
 #ifndef __ASSEMBLY__
 
-# define __REG(x)	(*((volatile unsigned long *)io_p2v(x)))
+# define __REG(x)	(*((volatile u32 *)io_p2v(x)))
 
 /* With indexed regs we don't want to feed the index through io_p2v()
    especially if it is a variable, otherwise horrible code will result. */
 # define __REG2(x,y)	\
-	(*(volatile unsigned long *)((unsigned long)&__REG(x) + (y)))
+	(*(volatile u32 *)((u32)&__REG(x) + (y)))
 
 # define __PREG(x)	(io_v2p((u32)&(x)))
 
diff --git a/include/asm-arm/arch-pxa/io.h b/include/asm-arm/arch-pxa/io.h
index c3bdbe44e21f..eb2dd58d397f 100644
--- a/include/asm-arm/arch-pxa/io.h
+++ b/include/asm-arm/arch-pxa/io.h
@@ -6,6 +6,8 @@
 #ifndef __ASM_ARM_ARCH_IO_H
 #define __ASM_ARM_ARCH_IO_H
 
+#include <asm/hardware.h>
+
 #define IO_SPACE_LIMIT 0xffffffff
 
 /*
diff --git a/include/asm-arm/arch-pxa/irda.h b/include/asm-arm/arch-pxa/irda.h
new file mode 100644
index 000000000000..748406f384c2
--- /dev/null
+++ b/include/asm-arm/arch-pxa/irda.h
@@ -0,0 +1,17 @@
+#ifndef ASMARM_ARCH_IRDA_H
+#define ASMARM_ARCH_IRDA_H
+
+/* board specific transceiver capabilities */
+
+#define IR_OFF		1
+#define IR_SIRMODE	2
+#define IR_FIRMODE	4
+
+struct pxaficp_platform_data {
+	int transceiver_cap;
+	void (*transceiver_mode)(struct device *dev, int mode);
+};
+
+extern void pxa_set_ficp_info(struct pxaficp_platform_data *info);
+
+#endif
diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h
index 3af7165ab0d7..a75a2470f4f5 100644
--- a/include/asm-arm/arch-pxa/pxa-regs.h
+++ b/include/asm-arm/arch-pxa/pxa-regs.h
@@ -326,6 +326,25 @@
 #define STDLL		__REG(0x40700000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
 #define STDLH		__REG(0x40700004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
 
+/* Hardware UART (HWUART) */
+#define HWUART		HWRBR
+#define HWRBR		__REG(0x41600000)  /* Receive Buffer Register (read only) */
+#define HWTHR		__REG(0x41600000)  /* Transmit Holding Register (write only) */
+#define HWIER		__REG(0x41600004)  /* Interrupt Enable Register (read/write) */
+#define HWIIR		__REG(0x41600008)  /* Interrupt ID Register (read only) */
+#define HWFCR		__REG(0x41600008)  /* FIFO Control Register (write only) */
+#define HWLCR		__REG(0x4160000C)  /* Line Control Register (read/write) */
+#define HWMCR		__REG(0x41600010)  /* Modem Control Register (read/write) */
+#define HWLSR		__REG(0x41600014)  /* Line Status Register (read only) */
+#define HWMSR		__REG(0x41600018)  /* Modem Status Register (read only) */
+#define HWSPR		__REG(0x4160001C)  /* Scratch Pad Register (read/write) */
+#define HWISR		__REG(0x41600020)  /* Infrared Selection Register (read/write) */
+#define HWFOR		__REG(0x41600024)  /* Receive FIFO Occupancy Register (read only) */
+#define HWABR		__REG(0x41600028)  /* Auto-Baud Control Register (read/write) */
+#define HWACR		__REG(0x4160002C)  /* Auto-Baud Count Register (read only) */
+#define HWDLL		__REG(0x41600000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
+#define HWDLH		__REG(0x41600004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
+
 #define IER_DMAE	(1 << 7)	/* DMA Requests Enable */
 #define IER_UUE		(1 << 6)	/* UART Unit Enable */
 #define IER_NRZE	(1 << 5)	/* NRZ coding Enable */
@@ -1013,14 +1032,12 @@
 #define ICCR0_LBM	(1 << 1)	/* Loopback mode */
 #define ICCR0_ITR	(1 << 0)	/* IrDA transmission */
 
-#ifdef CONFIG_PXA27x
 #define ICCR2_RXP       (1 << 3)	/* Receive Pin Polarity select */
 #define ICCR2_TXP       (1 << 2)	/* Transmit Pin Polarity select */
 #define ICCR2_TRIG	(3 << 0)	/* Receive FIFO Trigger threshold */
 #define ICCR2_TRIG_8    (0 << 0)	/* 	>= 8 bytes */
 #define ICCR2_TRIG_16   (1 << 0)	/*	>= 16 bytes */
 #define ICCR2_TRIG_32   (2 << 0)	/*	>= 32 bytes */
-#endif
 
 #ifdef CONFIG_PXA27x
 #define ICSR0_EOC	(1 << 6)	/* DMA End of Descriptor Chain */
@@ -1250,9 +1267,13 @@
 #define GPIO40_FFDTR		40	/* FFUART data terminal Ready */
 #define GPIO41_FFRTS		41	/* FFUART request to send */
 #define GPIO42_BTRXD		42	/* BTUART receive data */
+#define GPIO42_HWRXD		42	/* HWUART receive data */
 #define GPIO43_BTTXD		43	/* BTUART transmit data */
+#define GPIO43_HWTXD		43	/* HWUART transmit data */
 #define GPIO44_BTCTS		44	/* BTUART clear to send */
+#define GPIO44_HWCTS		44	/* HWUART clear to send */
 #define GPIO45_BTRTS		45	/* BTUART request to send */
+#define GPIO45_HWRTS		45	/* HWUART request to send */
 #define GPIO45_AC97_SYSCLK	45	/* AC97 System Clock */
 #define GPIO46_ICPRXD		46	/* ICP receive data */
 #define GPIO46_STRXD		46	/* STD_UART receive data */
@@ -1378,17 +1399,26 @@
 #define GPIO40_FFDTR_MD		(40 | GPIO_ALT_FN_2_OUT)
 #define GPIO41_FFRTS_MD		(41 | GPIO_ALT_FN_2_OUT)
 #define GPIO42_BTRXD_MD		(42 | GPIO_ALT_FN_1_IN)
+#define GPIO42_HWRXD_MD		(42 | GPIO_ALT_FN_3_IN)
 #define GPIO43_BTTXD_MD		(43 | GPIO_ALT_FN_2_OUT)
+#define GPIO43_HWTXD_MD		(43 | GPIO_ALT_FN_3_OUT)
 #define GPIO44_BTCTS_MD		(44 | GPIO_ALT_FN_1_IN)
+#define GPIO44_HWCTS_MD		(44 | GPIO_ALT_FN_3_IN)
 #define GPIO45_BTRTS_MD		(45 | GPIO_ALT_FN_2_OUT)
+#define GPIO45_HWRTS_MD		(45 | GPIO_ALT_FN_3_OUT)
 #define GPIO45_SYSCLK_AC97_MD		(45 | GPIO_ALT_FN_1_OUT)
 #define GPIO46_ICPRXD_MD	(46 | GPIO_ALT_FN_1_IN)
 #define GPIO46_STRXD_MD		(46 | GPIO_ALT_FN_2_IN)
 #define GPIO47_ICPTXD_MD	(47 | GPIO_ALT_FN_2_OUT)
 #define GPIO47_STTXD_MD		(47 | GPIO_ALT_FN_1_OUT)
 #define GPIO48_nPOE_MD		(48 | GPIO_ALT_FN_2_OUT)
+#define GPIO48_HWTXD_MD         (48 | GPIO_ALT_FN_1_OUT)
+#define GPIO48_nPOE_MD          (48 | GPIO_ALT_FN_2_OUT)
+#define GPIO49_HWRXD_MD		(49 | GPIO_ALT_FN_1_IN)
 #define GPIO49_nPWE_MD		(49 | GPIO_ALT_FN_2_OUT)
 #define GPIO50_nPIOR_MD		(50 | GPIO_ALT_FN_2_OUT)
+#define GPIO50_HWCTS_MD         (50 | GPIO_ALT_FN_1_IN)
+#define GPIO51_HWRTS_MD         (51 | GPIO_ALT_FN_1_OUT)
 #define GPIO51_nPIOW_MD		(51 | GPIO_ALT_FN_2_OUT)
 #define GPIO52_nPCE_1_MD	(52 | GPIO_ALT_FN_2_OUT)
 #define GPIO53_nPCE_2_MD	(53 | GPIO_ALT_FN_2_OUT)
@@ -1763,6 +1793,7 @@
 #define CKEN7_BTUART	(1 << 7)	/* BTUART Unit Clock Enable */
 #define CKEN6_FFUART	(1 << 6)	/* FFUART Unit Clock Enable */
 #define CKEN5_STUART	(1 << 5)	/* STUART Unit Clock Enable */
+#define CKEN4_HWUART	(1 << 4)	/* HWUART Unit Clock Enable */
 #define CKEN4_SSP3	(1 << 4)	/* SSP3 Unit Clock Enable */
 #define CKEN3_SSP	(1 << 3)	/* SSP Unit Clock Enable */
 #define CKEN3_SSP2	(1 << 3)	/* SSP2 Unit Clock Enable */
@@ -2282,4 +2313,11 @@
 
 #endif
 
+/* PWRMODE register M field values */
+
+#define PWRMODE_IDLE		0x1
+#define PWRMODE_STANDBY		0x2
+#define PWRMODE_SLEEP		0x3
+#define PWRMODE_DEEPSLEEP	0x7
+
 #endif
diff --git a/include/asm-arm/arch-pxa/uncompress.h b/include/asm-arm/arch-pxa/uncompress.h
index 4428d3eb7432..fe38090444e0 100644
--- a/include/asm-arm/arch-pxa/uncompress.h
+++ b/include/asm-arm/arch-pxa/uncompress.h
@@ -12,6 +12,7 @@
 #define FFUART		((volatile unsigned long *)0x40100000)
 #define BTUART		((volatile unsigned long *)0x40200000)
 #define STUART		((volatile unsigned long *)0x40700000)
+#define HWUART		((volatile unsigned long *)0x41600000)
 
 #define UART		FFUART
 
diff --git a/include/asm-arm/arch-rpc/io.h b/include/asm-arm/arch-rpc/io.h
index 24453c405a87..b4da08d7a336 100644
--- a/include/asm-arm/arch-rpc/io.h
+++ b/include/asm-arm/arch-rpc/io.h
@@ -13,6 +13,8 @@
 #ifndef __ASM_ARM_ARCH_IO_H
 #define __ASM_ARM_ARCH_IO_H
 
+#include <asm/hardware.h>
+
 #define IO_SPACE_LIMIT 0xffffffff
 
 /*
diff --git a/include/asm-arm/arch-s3c2410/fb.h b/include/asm-arm/arch-s3c2410/fb.h
index ac57bc887d82..4790491ba9d0 100644
--- a/include/asm-arm/arch-s3c2410/fb.h
+++ b/include/asm-arm/arch-s3c2410/fb.h
@@ -13,6 +13,7 @@
  *	07-Sep-2004	RTP	Created file
  *	03-Nov-2004	BJD	Updated and minor cleanups
  *	03-Aug-2005     RTP     Renamed to fb.h
+ *	26-Oct-2005	BJD	Changed name of platdata init
 */
 
 #ifndef __ASM_ARM_FB_H
@@ -64,6 +65,6 @@ struct s3c2410fb_mach_info {
 	unsigned long	lpcsel;
 };
 
-void __init set_s3c2410fb_info(struct s3c2410fb_mach_info *hard_s3c2410fb_info);
+extern void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *);
 
 #endif /* __ASM_ARM_FB_H */
diff --git a/include/asm-arm/arch-s3c2410/io.h b/include/asm-arm/arch-s3c2410/io.h
index 4bf272ed9add..16fbc8afffd9 100644
--- a/include/asm-arm/arch-s3c2410/io.h
+++ b/include/asm-arm/arch-s3c2410/io.h
@@ -15,6 +15,8 @@
 #ifndef __ASM_ARM_ARCH_IO_H
 #define __ASM_ARM_ARCH_IO_H
 
+#include <asm/hardware.h>
+
 #define IO_SPACE_LIMIT 0xffffffff
 
 /*
diff --git a/include/asm-arm/arch-s3c2410/regs-gpio.h b/include/asm-arm/arch-s3c2410/regs-gpio.h
index 2053cbacffc3..cb33d57c146c 100644
--- a/include/asm-arm/arch-s3c2410/regs-gpio.h
+++ b/include/asm-arm/arch-s3c2410/regs-gpio.h
@@ -20,6 +20,7 @@
  *    18-11-2004     BJD     Added S3C2440 AC97 controls
  *    10-Mar-2005    LCVR    Changed S3C2410_VA to S3C24XX_VA
  *    28-Mar-2005    LCVR    Fixed definition of GPB10
+ *    26-Oct-2005    BJD     Added generic configuration types
 */
 
 
@@ -43,6 +44,11 @@
 /* general configuration options */
 
 #define S3C2410_GPIO_LEAVE   (0xFFFFFFFF)
+#define S3C2410_GPIO_INPUT   (0xFFFFFFF0)
+#define S3C2410_GPIO_OUTPUT  (0xFFFFFFF1)
+#define S3C2410_GPIO_IRQ     (0xFFFFFFF2)	/* not available for all */
+#define S3C2410_GPIO_SFN2    (0xFFFFFFF2)	/* not available on A */
+#define S3C2410_GPIO_SFN3    (0xFFFFFFF3)	/* not available on A */
 
 /* configure GPIO ports A..G */
 
diff --git a/include/asm-arm/arch-sa1100/hardware.h b/include/asm-arm/arch-sa1100/hardware.h
index 19c3b1e186bb..28711aaa4968 100644
--- a/include/asm-arm/arch-sa1100/hardware.h
+++ b/include/asm-arm/arch-sa1100/hardware.h
@@ -22,13 +22,6 @@
 
 
 /*
- * We requires absolute addresses i.e. (PCMCIA_IO_0_BASE + 0x3f8) for 
- * in*()/out*() macros to be usable for all cases.
- */
-#define PCIO_BASE		0
-
-
-/*
  * SA1100 internal I/O mappings
  *
  * We have the following mapping:
diff --git a/include/asm-arm/arch-sa1100/io.h b/include/asm-arm/arch-sa1100/io.h
index 7d969ffbd3bb..9d4fe6cf205b 100644
--- a/include/asm-arm/arch-sa1100/io.h
+++ b/include/asm-arm/arch-sa1100/io.h
@@ -10,13 +10,19 @@
 #ifndef __ASM_ARM_ARCH_IO_H
 #define __ASM_ARM_ARCH_IO_H
 
+#include <asm/hardware.h>
+
 #define IO_SPACE_LIMIT 0xffffffff
 
 /*
  * We don't actually have real ISA nor PCI buses, but there is so many 
  * drivers out there that might just work if we fake them...
  */
-#define __io(a)			((void __iomem *)(PCIO_BASE + (a)))
+static inline void __iomem *__io(unsigned long addr)
+{
+	return (void __iomem *)addr;
+}
+#define __io(a)			__io(a)
 #define __mem_pci(a)		(a)
 #define __mem_isa(a)		(a)
 
diff --git a/include/asm-arm/arch-sa1100/system.h b/include/asm-arm/arch-sa1100/system.h
index 6f52118ba1a4..0f0612f79b2b 100644
--- a/include/asm-arm/arch-sa1100/system.h
+++ b/include/asm-arm/arch-sa1100/system.h
@@ -4,6 +4,7 @@
  * Copyright (c) 1999 Nicolas Pitre <nico@cam.org>
  */
 #include <linux/config.h>
+#include <asm/hardware.h>
 
 static inline void arch_idle(void)
 {
diff --git a/include/asm-arm/arch-shark/io.h b/include/asm-arm/arch-shark/io.h
index 5e6ed0038b2b..87ffa27f2962 100644
--- a/include/asm-arm/arch-shark/io.h
+++ b/include/asm-arm/arch-shark/io.h
@@ -11,6 +11,8 @@
 #ifndef __ASM_ARM_ARCH_IO_H
 #define __ASM_ARM_ARCH_IO_H
 
+#include <asm/hardware.h>
+
 #define IO_SPACE_LIMIT 0xffffffff
 
 /*
diff --git a/include/asm-arm/dma-mapping.h b/include/asm-arm/dma-mapping.h
index d62ade4e4cbb..e3e8541ee63b 100644
--- a/include/asm-arm/dma-mapping.h
+++ b/include/asm-arm/dma-mapping.h
@@ -70,7 +70,7 @@ static inline int dma_mapping_error(dma_addr_t dma_addr)
  * device-viewed address.
  */
 extern void *
-dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, int gfp);
+dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp);
 
 /**
  * dma_free_coherent - free memory allocated by dma_alloc_coherent
@@ -117,7 +117,7 @@ int dma_mmap_coherent(struct device *dev, struct vm_area_struct *vma,
  * device-viewed address.
  */
 extern void *
-dma_alloc_writecombine(struct device *dev, size_t size, dma_addr_t *handle, int gfp);
+dma_alloc_writecombine(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp);
 
 #define dma_free_writecombine(dev,size,cpu_addr,handle) \
 	dma_free_coherent(dev,size,cpu_addr,handle)
diff --git a/include/asm-arm/io.h b/include/asm-arm/io.h
index 5c4ae8f5dbb0..2e6799632f12 100644
--- a/include/asm-arm/io.h
+++ b/include/asm-arm/io.h
@@ -26,7 +26,6 @@
 #include <linux/types.h>
 #include <asm/byteorder.h>
 #include <asm/memory.h>
-#include <asm/arch/hardware.h>
 
 /*
  * ISA I/O bus memory addresses are 1:1 with the physical address.
diff --git a/include/asm-arm/mach/arch.h b/include/asm-arm/mach/arch.h
index 4fa95084a8c0..7273c6fd95b5 100644
--- a/include/asm-arm/mach/arch.h
+++ b/include/asm-arm/mach/arch.h
@@ -48,10 +48,10 @@ struct machine_desc {
  * Set of macros to define architecture features.  This is built into
  * a table by the linker.
  */
-#define MACHINE_START(_type,_name)		\
-const struct machine_desc __mach_desc_##_type	\
+#define MACHINE_START(_type,_name)			\
+static const struct machine_desc __mach_desc_##_type	\
  __attribute__((__section__(".arch.info.init"))) = {	\
-	.nr		= MACH_TYPE_##_type,	\
+	.nr		= MACH_TYPE_##_type,		\
 	.name		= _name,
 
 #define MACHINE_END				\
diff --git a/include/asm-arm/mach/map.h b/include/asm-arm/mach/map.h
index 9ac47cf8d2e4..0619522bd926 100644
--- a/include/asm-arm/mach/map.h
+++ b/include/asm-arm/mach/map.h
@@ -11,7 +11,7 @@
  */
 struct map_desc {
 	unsigned long virtual;
-	unsigned long physical;
+	unsigned long pfn;
 	unsigned long length;
 	unsigned int type;
 };
@@ -27,6 +27,9 @@ struct meminfo;
 #define MT_ROM			6
 #define MT_IXP2000_DEVICE	7
 
+#define	__phys_to_pfn(paddr)	(paddr >> PAGE_SHIFT)
+#define	__pfn_to_phys(pfn)	(pfn << PAGE_SHIFT)
+
 extern void create_memmap_holes(struct meminfo *);
 extern void memtable_init(struct meminfo *);
 extern void iotable_init(struct map_desc *, int);