Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (90 commits)
  mfd: Push byte swaps out of wm8994 bulk read path
  mfd: Rename ab8500 gpadc header
  mfd: Constify WM8994 write path
  mfd: Push byte swap out of WM8994 bulk I/O
  mfd: Avoid copying data in WM8994 I2C write
  mfd: Remove copy from WM831x I2C write function
  mfd: Staticise WM8994 PM ops
  regulator: Add a subdriver for TI TPS6105x regulator portions v2
  mfd: Add a core driver for TI TPS61050/TPS61052 chips v2
  gpio: Add Tunnel Creek support to sch_gpio
  mfd: Add Tunnel Creek support to lpc_sch
  pci_ids: Add Intel Tunnel Creek LPC Bridge device ID.
  regulator: MAX8997/8966 support
  mfd: Add WM8994 bulk register write operation
  mfd: Append additional read write on 88pm860x
  mfd: Adopt mfd_data in 88pm860x input driver
  mfd: Adopt mfd_data in 88pm860x regulator
  mfd: Adopt mfd_data in 88pm860x led
  mfd: Adopt mfd_data in 88pm860x backlight
  mfd: Fix MAX8997 Kconfig entry typos
  ...

1 files changed, 114 insertions, 0 deletions

diff --git a/include/linux/mfd/max8997.h b/include/linux/mfd/max8997.h
new file mode 100644
index 000000000000..cb671b3451bf
--- /dev/null
+++ b/include/linux/mfd/max8997.h
@@ -0,0 +1,114 @@
+/*
+ * max8997.h - Driver for the Maxim 8997/8966
+ *
+ *  Copyright (C) 2009-2010 Samsung Electrnoics
+ *  MyungJoo Ham <myungjoo.ham@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
+ *
+ * This driver is based on max8998.h
+ *
+ * MAX8997 has PMIC, MUIC, HAPTIC, RTC, FLASH, and Fuel Gauge devices.
+ * Except Fuel Gauge, every device shares the same I2C bus and included in
+ * this mfd driver. Although the fuel gauge is included in the chip, it is
+ * excluded from the driver because a) it has a different I2C bus from
+ * others and b) it can be enabled simply by using MAX17042 driver.
+ */
+
+#ifndef __LINUX_MFD_MAX8998_H
+#define __LINUX_MFD_MAX8998_H
+
+#include <linux/regulator/consumer.h>
+
+/* MAX8997/8966 regulator IDs */
+enum max8998_regulators {
+	MAX8997_LDO1 = 0,
+	MAX8997_LDO2,
+	MAX8997_LDO3,
+	MAX8997_LDO4,
+	MAX8997_LDO5,
+	MAX8997_LDO6,
+	MAX8997_LDO7,
+	MAX8997_LDO8,
+	MAX8997_LDO9,
+	MAX8997_LDO10,
+	MAX8997_LDO11,
+	MAX8997_LDO12,
+	MAX8997_LDO13,
+	MAX8997_LDO14,
+	MAX8997_LDO15,
+	MAX8997_LDO16,
+	MAX8997_LDO17,
+	MAX8997_LDO18,
+	MAX8997_LDO21,
+	MAX8997_BUCK1,
+	MAX8997_BUCK2,
+	MAX8997_BUCK3,
+	MAX8997_BUCK4,
+	MAX8997_BUCK5,
+	MAX8997_BUCK6,
+	MAX8997_BUCK7,
+	MAX8997_EN32KHZ_AP,
+	MAX8997_EN32KHZ_CP,
+	MAX8997_ENVICHG,
+	MAX8997_ESAFEOUT1,
+	MAX8997_ESAFEOUT2,
+	MAX8997_CHARGER_CV, /* control MBCCV of MBCCTRL3 */
+	MAX8997_CHARGER, /* charger current, MBCCTRL4 */
+	MAX8997_CHARGER_TOPOFF, /* MBCCTRL5 */
+
+	MAX8997_REG_MAX,
+};
+
+struct max8997_regulator_data {
+	int id;
+	struct regulator_init_data *initdata;
+};
+
+struct max8997_platform_data {
+	bool wakeup;
+	/* IRQ: Not implemented */
+	/* ---- PMIC ---- */
+	struct max8997_regulator_data *regulators;
+	int num_regulators;
+
+	/*
+	 * SET1~3 DVS GPIOs control Buck1, 2, and 5 simultaneously. Therefore,
+	 * With buckx_gpiodvs enabled, the buckx cannot be controlled
+	 * independently. To control buckx (of 1, 2, and 5) independently,
+	 * disable buckx_gpiodvs and control with BUCKxDVS1 register.
+	 *
+	 * When buckx_gpiodvs and bucky_gpiodvs are both enabled, set_voltage
+	 * on buckx will change the voltage of bucky at the same time.
+	 *
+	 */
+	bool ignore_gpiodvs_side_effect;
+	int buck125_gpios[3]; /* GPIO of [0]SET1, [1]SET2, [2]SET3 */
+	int buck125_default_idx; /* Default value of SET1, 2, 3 */
+	unsigned int buck1_voltage[8]; /* buckx_voltage in uV */
+	bool buck1_gpiodvs;
+	unsigned int buck2_voltage[8];
+	bool buck2_gpiodvs;
+	unsigned int buck5_voltage[8];
+	bool buck5_gpiodvs;
+
+	/* MUIC: Not implemented */
+	/* HAPTIC: Not implemented */
+	/* RTC: Not implemented */
+	/* Flash: Not implemented */
+	/* Charger control: Not implemented */
+};
+
+#endif /* __LINUX_MFD_MAX8998_H */