Merge tag 'usb-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB updates from Greg KH:
 "Here is the big USB patchset for 4.12-rc1.

  Lots of good stuff here, after many many many attempts, the kernel
  finally has a working typeC interface, many thanks to Heikki and
  Guenter and others who have taken the time to get this merged. It
  wasn't an easy path for them at all.

  There's also a staging driver that uses this new api, which is why
  it's coming in through this tree.

  Along with that, there's the usual huge number of changes for gadget
  drivers, xhci, and other stuff. Johan also finally refactored pretty
  much every driver that was looking at USB endpoints to do it in a
  common way, which will help prevent any "badly-formed" devices from
  causing problems in drivers. That too wasn't a simple task.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-4.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (263 commits)
  staging: typec: Fairchild FUSB302 Type-c chip driver
  staging: typec: Type-C Port Controller Interface driver (tcpci)
  staging: typec: USB Type-C Port Manager (tcpm)
  usb: host: xhci: remove #ifdef around PM functions
  usb: musb: don't mark of_dev_auxdata as initdata
  usb: misc: legousbtower: Fix buffers on stack
  USB: Revert "cdc-wdm: fix "out-of-sync" due to missing notifications"
  usb: Make sure usb/phy/of gets built-in
  USB: storage: e-mail update in drivers/usb/storage/unusual_devs.h
  usb: host: xhci: print correct command ring address
  usb: host: xhci: delete sp_dma_buffers for scratchpad
  usb: host: xhci: using correct specification chapter reference for DCBAAP
  xhci: switch to pci_alloc_irq_vectors
  usb: host: xhci-plat: set resume_quirk() for R-Car controllers
  usb: host: xhci-plat: add resume_quirk()
  usb: host: xhci-plat: enable clk in resume timing
  usb: host: plat: Enable xHCI plat runtime PM
  USB: serial: ftdi_sio: add device ID for Microsemi/Arrow SF2PLUS Dev Kit
  USB: serial: constify static arrays
  usb: fix some references for /proc/bus/usb
  ...

1 files changed, 32 insertions, 10 deletions

diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h
index 704a1ab8240c..e2f0ab07eea5 100644
--- a/include/linux/usb/serial.h
+++ b/include/linux/usb/serial.h
@@ -20,7 +20,7 @@
 #include <linux/kfifo.h>
 
 /* The maximum number of ports one device can grab at once */
-#define MAX_NUM_PORTS		8
+#define MAX_NUM_PORTS		16
 
 /* parity check flag */
 #define RELEVANT_IFLAG(iflag)	(iflag & (IGNBRK|BRKINT|IGNPAR|PARMRK|INPCK))
@@ -159,10 +159,10 @@ struct usb_serial {
 	unsigned char			minors_reserved:1;
 	unsigned char			num_ports;
 	unsigned char			num_port_pointers;
-	char				num_interrupt_in;
-	char				num_interrupt_out;
-	char				num_bulk_in;
-	char				num_bulk_out;
+	unsigned char			num_interrupt_in;
+	unsigned char			num_interrupt_out;
+	unsigned char			num_bulk_in;
+	unsigned char			num_bulk_out;
 	struct usb_serial_port		*port[MAX_NUM_PORTS];
 	struct kref			kref;
 	struct mutex			disc_mutex;
@@ -181,6 +181,17 @@ static inline void usb_set_serial_data(struct usb_serial *serial, void *data)
 	serial->private = data;
 }
 
+struct usb_serial_endpoints {
+	unsigned char num_bulk_in;
+	unsigned char num_bulk_out;
+	unsigned char num_interrupt_in;
+	unsigned char num_interrupt_out;
+	struct usb_endpoint_descriptor *bulk_in[MAX_NUM_PORTS];
+	struct usb_endpoint_descriptor *bulk_out[MAX_NUM_PORTS];
+	struct usb_endpoint_descriptor *interrupt_in[MAX_NUM_PORTS];
+	struct usb_endpoint_descriptor *interrupt_out[MAX_NUM_PORTS];
+};
+
 /**
  * usb_serial_driver - describes a usb serial driver
  * @description: pointer to a string that describes this driver.  This string
@@ -188,12 +199,17 @@ static inline void usb_set_serial_data(struct usb_serial *serial, void *data)
  * @id_table: pointer to a list of usb_device_id structures that define all
  *	of the devices this structure can support.
  * @num_ports: the number of different ports this device will have.
+ * @num_bulk_in: minimum number of bulk-in endpoints
+ * @num_bulk_out: minimum number of bulk-out endpoints
+ * @num_interrupt_in: minimum number of interrupt-in endpoints
+ * @num_interrupt_out: minimum number of interrupt-out endpoints
  * @bulk_in_size: minimum number of bytes to allocate for bulk-in buffer
  *	(0 = end-point size)
  * @bulk_out_size: bytes to allocate for bulk-out buffer (0 = end-point size)
  * @calc_num_ports: pointer to a function to determine how many ports this
- *	device has dynamically.  It will be called after the probe()
- *	callback is called, but before attach()
+ *	device has dynamically. It can also be used to verify the number of
+ *	endpoints or to modify the port-endpoint mapping. It will be called
+ *	after the probe() callback is called, but before attach().
  * @probe: pointer to the driver's probe function.
  *	This will be called when the device is inserted into the system,
  *	but before the device has been fully initialized by the usb_serial
@@ -227,19 +243,26 @@ static inline void usb_set_serial_data(struct usb_serial *serial, void *data)
 struct usb_serial_driver {
 	const char *description;
 	const struct usb_device_id *id_table;
-	char	num_ports;
 
 	struct list_head	driver_list;
 	struct device_driver	driver;
 	struct usb_driver	*usb_driver;
 	struct usb_dynids	dynids;
 
+	unsigned char		num_ports;
+
+	unsigned char		num_bulk_in;
+	unsigned char		num_bulk_out;
+	unsigned char		num_interrupt_in;
+	unsigned char		num_interrupt_out;
+
 	size_t			bulk_in_size;
 	size_t			bulk_out_size;
 
 	int (*probe)(struct usb_serial *serial, const struct usb_device_id *id);
 	int (*attach)(struct usb_serial *serial);
-	int (*calc_num_ports) (struct usb_serial *serial);
+	int (*calc_num_ports)(struct usb_serial *serial,
+			struct usb_serial_endpoints *epds);
 
 	void (*disconnect)(struct usb_serial *serial);
 	void (*release)(struct usb_serial *serial);
@@ -356,7 +379,6 @@ extern void usb_serial_handle_dcd_change(struct usb_serial_port *usb_port,
 extern int usb_serial_bus_register(struct usb_serial_driver *device);
 extern void usb_serial_bus_deregister(struct usb_serial_driver *device);
 
-extern struct usb_serial_driver usb_serial_generic_device;
 extern struct bus_type usb_serial_bus_type;
 extern struct tty_driver *usb_serial_tty_driver;