media: saa7146: deprecate hexium_gemini/orion, mxb and ttpci

Deprecate the hexium_gemini, hexium_orion, mxb and ttpci saa7146-based
drivers: these drivers do not use the vb2 framework for video streaming,
instead it uses the old videobuf framework.

We want to get rid of these old drivers, so deprecated these for future
removal.

[hverkuil: update MAINTAINERS file]

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>

2 files changed, 0 insertions, 738 deletions

diff --git a/include/media/drv-intf/saa7146.h b/include/media/drv-intf/saa7146.h
deleted file mode 100644
index 71ce63c99cb4..000000000000
--- a/include/media/drv-intf/saa7146.h
+++ /dev/null
@@ -1,472 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __SAA7146__
-#define __SAA7146__
-
-#include <linux/delay.h>	/* for delay-stuff */
-#include <linux/slab.h>		/* for kmalloc/kfree */
-#include <linux/pci.h>		/* for pci-config-stuff, vendor ids etc. */
-#include <linux/init.h>		/* for "__init" */
-#include <linux/interrupt.h>	/* for IMMEDIATE_BH */
-#include <linux/kmod.h>		/* for kernel module loader */
-#include <linux/i2c.h>		/* for i2c subsystem */
-#include <asm/io.h>		/* for accessing devices */
-#include <linux/stringify.h>
-#include <linux/mutex.h>
-#include <linux/scatterlist.h>
-#include <media/v4l2-device.h>
-#include <media/v4l2-ctrls.h>
-
-#include <linux/vmalloc.h>	/* for vmalloc() */
-#include <linux/mm.h>		/* for vmalloc_to_page() */
-
-#define saa7146_write(sxy,adr,dat)    writel((dat),(sxy->mem+(adr)))
-#define saa7146_read(sxy,adr)         readl(sxy->mem+(adr))
-
-extern unsigned int saa7146_debug;
-
-#ifndef DEBUG_VARIABLE
-	#define DEBUG_VARIABLE saa7146_debug
-#endif
-
-#define ERR(fmt, ...)	pr_err("%s: " fmt, __func__, ##__VA_ARGS__)
-
-#define _DBG(mask, fmt, ...)						\
-do {									\
-	if (DEBUG_VARIABLE & mask)					\
-		pr_debug("%s(): " fmt, __func__, ##__VA_ARGS__);	\
-} while (0)
-
-/* simple debug messages */
-#define DEB_S(fmt, ...)		_DBG(0x01, fmt, ##__VA_ARGS__)
-/* more detailed debug messages */
-#define DEB_D(fmt, ...)		_DBG(0x02, fmt, ##__VA_ARGS__)
-/* print enter and exit of functions */
-#define DEB_EE(fmt, ...)	_DBG(0x04, fmt, ##__VA_ARGS__)
-/* i2c debug messages */
-#define DEB_I2C(fmt, ...)	_DBG(0x08, fmt, ##__VA_ARGS__)
-/* vbi debug messages */
-#define DEB_VBI(fmt, ...)	_DBG(0x10, fmt, ##__VA_ARGS__)
-/* interrupt debug messages */
-#define DEB_INT(fmt, ...)	_DBG(0x20, fmt, ##__VA_ARGS__)
-/* capture debug messages */
-#define DEB_CAP(fmt, ...)	_DBG(0x40, fmt, ##__VA_ARGS__)
-
-#define SAA7146_ISR_CLEAR(x,y) \
-	saa7146_write(x, ISR, (y));
-
-struct module;
-
-struct saa7146_dev;
-struct saa7146_extension;
-struct saa7146_vv;
-
-/* saa7146 page table */
-struct saa7146_pgtable {
-	unsigned int	size;
-	__le32		*cpu;
-	dma_addr_t	dma;
-	/* used for offsets for u,v planes for planar capture modes */
-	unsigned long	offset;
-	/* used for custom pagetables (used for example by budget dvb cards) */
-	struct scatterlist *slist;
-	int		nents;
-};
-
-struct saa7146_pci_extension_data {
-	struct saa7146_extension *ext;
-	void *ext_priv;			/* most likely a name string */
-};
-
-#define MAKE_EXTENSION_PCI(x_var, x_vendor, x_device)		\
-	{							\
-		.vendor    = PCI_VENDOR_ID_PHILIPS,		\
-		.device	   = PCI_DEVICE_ID_PHILIPS_SAA7146,	\
-		.subvendor = x_vendor,				\
-		.subdevice = x_device,				\
-		.driver_data = (unsigned long)& x_var,		\
-	}
-
-struct saa7146_extension
-{
-	char	name[32];		/* name of the device */
-#define SAA7146_USE_I2C_IRQ	0x1
-#define SAA7146_I2C_SHORT_DELAY	0x2
-	int	flags;
-
-	/* pairs of subvendor and subdevice ids for
-	   supported devices, last entry 0xffff, 0xfff */
-	struct module *module;
-	struct pci_driver driver;
-	const struct pci_device_id *pci_tbl;
-
-	/* extension functions */
-	int (*probe)(struct saa7146_dev *);
-	int (*attach)(struct saa7146_dev *, struct saa7146_pci_extension_data *);
-	int (*detach)(struct saa7146_dev*);
-
-	u32	irq_mask;	/* mask to indicate, which irq-events are handled by the extension */
-	void	(*irq_func)(struct saa7146_dev*, u32* irq_mask);
-};
-
-struct saa7146_dma
-{
-	dma_addr_t	dma_handle;
-	__le32		*cpu_addr;
-};
-
-struct saa7146_dev
-{
-	struct module			*module;
-
-	struct v4l2_device		v4l2_dev;
-	struct v4l2_ctrl_handler	ctrl_handler;
-
-	/* different device locks */
-	spinlock_t			slock;
-	struct mutex			v4l2_lock;
-
-	unsigned char			__iomem *mem;		/* pointer to mapped IO memory */
-	u32				revision;	/* chip revision; needed for bug-workarounds*/
-
-	/* pci-device & irq stuff*/
-	char				name[32];
-	struct pci_dev			*pci;
-	u32				int_todo;
-	spinlock_t			int_slock;
-
-	/* extension handling */
-	struct saa7146_extension	*ext;		/* indicates if handled by extension */
-	void				*ext_priv;	/* pointer for extension private use (most likely some private data) */
-	struct saa7146_ext_vv		*ext_vv_data;
-
-	/* per device video/vbi information (if available) */
-	struct saa7146_vv	*vv_data;
-	void (*vv_callback)(struct saa7146_dev *dev, unsigned long status);
-
-	/* i2c-stuff */
-	struct mutex			i2c_lock;
-
-	u32				i2c_bitrate;
-	struct saa7146_dma		d_i2c;	/* pointer to i2c memory */
-	wait_queue_head_t		i2c_wq;
-	int				i2c_op;
-
-	/* memories */
-	struct saa7146_dma		d_rps0;
-	struct saa7146_dma		d_rps1;
-};
-
-static inline struct saa7146_dev *to_saa7146_dev(struct v4l2_device *v4l2_dev)
-{
-	return container_of(v4l2_dev, struct saa7146_dev, v4l2_dev);
-}
-
-/* from saa7146_i2c.c */
-int saa7146_i2c_adapter_prepare(struct saa7146_dev *dev, struct i2c_adapter *i2c_adapter, u32 bitrate);
-
-/* from saa7146_core.c */
-int saa7146_register_extension(struct saa7146_extension*);
-int saa7146_unregister_extension(struct saa7146_extension*);
-struct saa7146_format* saa7146_format_by_fourcc(struct saa7146_dev *dev, int fourcc);
-int saa7146_pgtable_alloc(struct pci_dev *pci, struct saa7146_pgtable *pt);
-void saa7146_pgtable_free(struct pci_dev *pci, struct saa7146_pgtable *pt);
-int saa7146_pgtable_build_single(struct pci_dev *pci, struct saa7146_pgtable *pt, struct scatterlist *list, int length );
-void *saa7146_vmalloc_build_pgtable(struct pci_dev *pci, long length, struct saa7146_pgtable *pt);
-void saa7146_vfree_destroy_pgtable(struct pci_dev *pci, void *mem, struct saa7146_pgtable *pt);
-void saa7146_setgpio(struct saa7146_dev *dev, int port, u32 data);
-int saa7146_wait_for_debi_done(struct saa7146_dev *dev, int nobusyloop);
-
-/* some memory sizes */
-#define SAA7146_I2C_MEM		( 1*PAGE_SIZE)
-#define SAA7146_RPS_MEM		( 1*PAGE_SIZE)
-
-/* some i2c constants */
-#define SAA7146_I2C_TIMEOUT	100	/* i2c-timeout-value in ms */
-#define SAA7146_I2C_RETRIES	3	/* how many times shall we retry an i2c-operation? */
-#define SAA7146_I2C_DELAY	5	/* time we wait after certain i2c-operations */
-
-/* unsorted defines */
-#define ME1    0x0000000800
-#define PV1    0x0000000008
-
-/* gpio defines */
-#define SAA7146_GPIO_INPUT 0x00
-#define SAA7146_GPIO_IRQHI 0x10
-#define SAA7146_GPIO_IRQLO 0x20
-#define SAA7146_GPIO_IRQHL 0x30
-#define SAA7146_GPIO_OUTLO 0x40
-#define SAA7146_GPIO_OUTHI 0x50
-
-/* debi defines */
-#define DEBINOSWAP 0x000e0000
-
-/* define for the register programming sequencer (rps) */
-#define CMD_NOP		0x00000000  /* No operation */
-#define CMD_CLR_EVENT	0x00000000  /* Clear event */
-#define CMD_SET_EVENT	0x10000000  /* Set signal event */
-#define CMD_PAUSE	0x20000000  /* Pause */
-#define CMD_CHECK_LATE	0x30000000  /* Check late */
-#define CMD_UPLOAD	0x40000000  /* Upload */
-#define CMD_STOP	0x50000000  /* Stop */
-#define CMD_INTERRUPT	0x60000000  /* Interrupt */
-#define CMD_JUMP	0x80000000  /* Jump */
-#define CMD_WR_REG	0x90000000  /* Write (load) register */
-#define CMD_RD_REG	0xa0000000  /* Read (store) register */
-#define CMD_WR_REG_MASK	0xc0000000  /* Write register with mask */
-
-#define CMD_OAN		MASK_27
-#define CMD_INV		MASK_26
-#define CMD_SIG4	MASK_25
-#define CMD_SIG3	MASK_24
-#define CMD_SIG2	MASK_23
-#define CMD_SIG1	MASK_22
-#define CMD_SIG0	MASK_21
-#define CMD_O_FID_B	MASK_14
-#define CMD_E_FID_B	MASK_13
-#define CMD_O_FID_A	MASK_12
-#define CMD_E_FID_A	MASK_11
-
-/* some events and command modifiers for rps1 squarewave generator */
-#define EVT_HS          (1<<15)     // Source Line Threshold reached
-#define EVT_VBI_B       (1<<9)      // VSYNC Event
-#define RPS_OAN         (1<<27)     // 1: OR events, 0: AND events
-#define RPS_INV         (1<<26)     // Invert (compound) event
-#define GPIO3_MSK       0xFF000000  // GPIO #3 control bits
-
-/* Bit mask constants */
-#define MASK_00   0x00000001    /* Mask value for bit 0 */
-#define MASK_01   0x00000002    /* Mask value for bit 1 */
-#define MASK_02   0x00000004    /* Mask value for bit 2 */
-#define MASK_03   0x00000008    /* Mask value for bit 3 */
-#define MASK_04   0x00000010    /* Mask value for bit 4 */
-#define MASK_05   0x00000020    /* Mask value for bit 5 */
-#define MASK_06   0x00000040    /* Mask value for bit 6 */
-#define MASK_07   0x00000080    /* Mask value for bit 7 */
-#define MASK_08   0x00000100    /* Mask value for bit 8 */
-#define MASK_09   0x00000200    /* Mask value for bit 9 */
-#define MASK_10   0x00000400    /* Mask value for bit 10 */
-#define MASK_11   0x00000800    /* Mask value for bit 11 */
-#define MASK_12   0x00001000    /* Mask value for bit 12 */
-#define MASK_13   0x00002000    /* Mask value for bit 13 */
-#define MASK_14   0x00004000    /* Mask value for bit 14 */
-#define MASK_15   0x00008000    /* Mask value for bit 15 */
-#define MASK_16   0x00010000    /* Mask value for bit 16 */
-#define MASK_17   0x00020000    /* Mask value for bit 17 */
-#define MASK_18   0x00040000    /* Mask value for bit 18 */
-#define MASK_19   0x00080000    /* Mask value for bit 19 */
-#define MASK_20   0x00100000    /* Mask value for bit 20 */
-#define MASK_21   0x00200000    /* Mask value for bit 21 */
-#define MASK_22   0x00400000    /* Mask value for bit 22 */
-#define MASK_23   0x00800000    /* Mask value for bit 23 */
-#define MASK_24   0x01000000    /* Mask value for bit 24 */
-#define MASK_25   0x02000000    /* Mask value for bit 25 */
-#define MASK_26   0x04000000    /* Mask value for bit 26 */
-#define MASK_27   0x08000000    /* Mask value for bit 27 */
-#define MASK_28   0x10000000    /* Mask value for bit 28 */
-#define MASK_29   0x20000000    /* Mask value for bit 29 */
-#define MASK_30   0x40000000    /* Mask value for bit 30 */
-#define MASK_31   0x80000000    /* Mask value for bit 31 */
-
-#define MASK_B0   0x000000ff    /* Mask value for byte 0 */
-#define MASK_B1   0x0000ff00    /* Mask value for byte 1 */
-#define MASK_B2   0x00ff0000    /* Mask value for byte 2 */
-#define MASK_B3   0xff000000    /* Mask value for byte 3 */
-
-#define MASK_W0   0x0000ffff    /* Mask value for word 0 */
-#define MASK_W1   0xffff0000    /* Mask value for word 1 */
-
-#define MASK_PA   0xfffffffc    /* Mask value for physical address */
-#define MASK_PR   0xfffffffe	/* Mask value for protection register */
-#define MASK_ER   0xffffffff    /* Mask value for the entire register */
-
-#define MASK_NONE 0x00000000    /* No mask */
-
-/* register aliases */
-#define BASE_ODD1         0x00  /* Video DMA 1 registers  */
-#define BASE_EVEN1        0x04
-#define PROT_ADDR1        0x08
-#define PITCH1            0x0C
-#define BASE_PAGE1        0x10  /* Video DMA 1 base page */
-#define NUM_LINE_BYTE1    0x14
-
-#define BASE_ODD2         0x18  /* Video DMA 2 registers */
-#define BASE_EVEN2        0x1C
-#define PROT_ADDR2        0x20
-#define PITCH2            0x24
-#define BASE_PAGE2        0x28  /* Video DMA 2 base page */
-#define NUM_LINE_BYTE2    0x2C
-
-#define BASE_ODD3         0x30  /* Video DMA 3 registers */
-#define BASE_EVEN3        0x34
-#define PROT_ADDR3        0x38
-#define PITCH3            0x3C
-#define BASE_PAGE3        0x40  /* Video DMA 3 base page */
-#define NUM_LINE_BYTE3    0x44
-
-#define PCI_BT_V1         0x48  /* Video/FIFO 1 */
-#define PCI_BT_V2         0x49  /* Video/FIFO 2 */
-#define PCI_BT_V3         0x4A  /* Video/FIFO 3 */
-#define PCI_BT_DEBI       0x4B  /* DEBI */
-#define PCI_BT_A          0x4C  /* Audio */
-
-#define DD1_INIT          0x50  /* Init setting of DD1 interface */
-
-#define DD1_STREAM_B      0x54  /* DD1 B video data stream handling */
-#define DD1_STREAM_A      0x56  /* DD1 A video data stream handling */
-
-#define BRS_CTRL          0x58  /* BRS control register */
-#define HPS_CTRL          0x5C  /* HPS control register */
-#define HPS_V_SCALE       0x60  /* HPS vertical scale */
-#define HPS_V_GAIN        0x64  /* HPS vertical ACL and gain */
-#define HPS_H_PRESCALE    0x68  /* HPS horizontal prescale   */
-#define HPS_H_SCALE       0x6C  /* HPS horizontal scale */
-#define BCS_CTRL          0x70  /* BCS control */
-#define CHROMA_KEY_RANGE  0x74
-#define CLIP_FORMAT_CTRL  0x78  /* HPS outputs formats & clipping */
-
-#define DEBI_CONFIG       0x7C
-#define DEBI_COMMAND      0x80
-#define DEBI_PAGE         0x84
-#define DEBI_AD           0x88
-
-#define I2C_TRANSFER      0x8C
-#define I2C_STATUS        0x90
-
-#define BASE_A1_IN        0x94	/* Audio 1 input DMA */
-#define PROT_A1_IN        0x98
-#define PAGE_A1_IN        0x9C
-
-#define BASE_A1_OUT       0xA0  /* Audio 1 output DMA */
-#define PROT_A1_OUT       0xA4
-#define PAGE_A1_OUT       0xA8
-
-#define BASE_A2_IN        0xAC  /* Audio 2 input DMA */
-#define PROT_A2_IN        0xB0
-#define PAGE_A2_IN        0xB4
-
-#define BASE_A2_OUT       0xB8  /* Audio 2 output DMA */
-#define PROT_A2_OUT       0xBC
-#define PAGE_A2_OUT       0xC0
-
-#define RPS_PAGE0         0xC4  /* RPS task 0 page register */
-#define RPS_PAGE1         0xC8  /* RPS task 1 page register */
-
-#define RPS_THRESH0       0xCC  /* HBI threshold for task 0 */
-#define RPS_THRESH1       0xD0  /* HBI threshold for task 1 */
-
-#define RPS_TOV0          0xD4  /* RPS timeout for task 0 */
-#define RPS_TOV1          0xD8  /* RPS timeout for task 1 */
-
-#define IER               0xDC  /* Interrupt enable register */
-
-#define GPIO_CTRL         0xE0  /* GPIO 0-3 register */
-
-#define EC1SSR            0xE4  /* Event cnt set 1 source select */
-#define EC2SSR            0xE8  /* Event cnt set 2 source select */
-#define ECT1R             0xEC  /* Event cnt set 1 thresholds */
-#define ECT2R             0xF0  /* Event cnt set 2 thresholds */
-
-#define ACON1             0xF4
-#define ACON2             0xF8
-
-#define MC1               0xFC   /* Main control register 1 */
-#define MC2               0x100  /* Main control register 2  */
-
-#define RPS_ADDR0         0x104  /* RPS task 0 address register */
-#define RPS_ADDR1         0x108  /* RPS task 1 address register */
-
-#define ISR               0x10C  /* Interrupt status register */
-#define PSR               0x110  /* Primary status register */
-#define SSR               0x114  /* Secondary status register */
-
-#define EC1R              0x118  /* Event counter set 1 register */
-#define EC2R              0x11C  /* Event counter set 2 register */
-
-#define PCI_VDP1          0x120  /* Video DMA pointer of FIFO 1 */
-#define PCI_VDP2          0x124  /* Video DMA pointer of FIFO 2 */
-#define PCI_VDP3          0x128  /* Video DMA pointer of FIFO 3 */
-#define PCI_ADP1          0x12C  /* Audio DMA pointer of audio out 1 */
-#define PCI_ADP2          0x130  /* Audio DMA pointer of audio in 1 */
-#define PCI_ADP3          0x134  /* Audio DMA pointer of audio out 2 */
-#define PCI_ADP4          0x138  /* Audio DMA pointer of audio in 2 */
-#define PCI_DMA_DDP       0x13C  /* DEBI DMA pointer */
-
-#define LEVEL_REP         0x140,
-#define A_TIME_SLOT1      0x180,  /* from 180 - 1BC */
-#define A_TIME_SLOT2      0x1C0,  /* from 1C0 - 1FC */
-
-/* isr masks */
-#define SPCI_PPEF       0x80000000  /* PCI parity error */
-#define SPCI_PABO       0x40000000  /* PCI access error (target or master abort) */
-#define SPCI_PPED       0x20000000  /* PCI parity error on 'real time data' */
-#define SPCI_RPS_I1     0x10000000  /* Interrupt issued by RPS1 */
-#define SPCI_RPS_I0     0x08000000  /* Interrupt issued by RPS0 */
-#define SPCI_RPS_LATE1  0x04000000  /* RPS task 1 is late */
-#define SPCI_RPS_LATE0  0x02000000  /* RPS task 0 is late */
-#define SPCI_RPS_E1     0x01000000  /* RPS error from task 1 */
-#define SPCI_RPS_E0     0x00800000  /* RPS error from task 0 */
-#define SPCI_RPS_TO1    0x00400000  /* RPS timeout task 1 */
-#define SPCI_RPS_TO0    0x00200000  /* RPS timeout task 0 */
-#define SPCI_UPLD       0x00100000  /* RPS in upload */
-#define SPCI_DEBI_S     0x00080000  /* DEBI status */
-#define SPCI_DEBI_E     0x00040000  /* DEBI error */
-#define SPCI_IIC_S      0x00020000  /* I2C status */
-#define SPCI_IIC_E      0x00010000  /* I2C error */
-#define SPCI_A2_IN      0x00008000  /* Audio 2 input DMA protection / limit */
-#define SPCI_A2_OUT     0x00004000  /* Audio 2 output DMA protection / limit */
-#define SPCI_A1_IN      0x00002000  /* Audio 1 input DMA protection / limit */
-#define SPCI_A1_OUT     0x00001000  /* Audio 1 output DMA protection / limit */
-#define SPCI_AFOU       0x00000800  /* Audio FIFO over- / underflow */
-#define SPCI_V_PE       0x00000400  /* Video protection address */
-#define SPCI_VFOU       0x00000200  /* Video FIFO over- / underflow */
-#define SPCI_FIDA       0x00000100  /* Field ID video port A */
-#define SPCI_FIDB       0x00000080  /* Field ID video port B */
-#define SPCI_PIN3       0x00000040  /* GPIO pin 3 */
-#define SPCI_PIN2       0x00000020  /* GPIO pin 2 */
-#define SPCI_PIN1       0x00000010  /* GPIO pin 1 */
-#define SPCI_PIN0       0x00000008  /* GPIO pin 0 */
-#define SPCI_ECS        0x00000004  /* Event counter 1, 2, 4, 5 */
-#define SPCI_EC3S       0x00000002  /* Event counter 3 */
-#define SPCI_EC0S       0x00000001  /* Event counter 0 */
-
-/* i2c */
-#define	SAA7146_I2C_ABORT	(1<<7)
-#define	SAA7146_I2C_SPERR	(1<<6)
-#define	SAA7146_I2C_APERR	(1<<5)
-#define	SAA7146_I2C_DTERR	(1<<4)
-#define	SAA7146_I2C_DRERR	(1<<3)
-#define	SAA7146_I2C_AL		(1<<2)
-#define	SAA7146_I2C_ERR		(1<<1)
-#define	SAA7146_I2C_BUSY	(1<<0)
-
-#define	SAA7146_I2C_START	(0x3)
-#define	SAA7146_I2C_CONT	(0x2)
-#define	SAA7146_I2C_STOP	(0x1)
-#define	SAA7146_I2C_NOP		(0x0)
-
-#define SAA7146_I2C_BUS_BIT_RATE_6400	(0x500)
-#define SAA7146_I2C_BUS_BIT_RATE_3200	(0x100)
-#define SAA7146_I2C_BUS_BIT_RATE_480	(0x400)
-#define SAA7146_I2C_BUS_BIT_RATE_320	(0x600)
-#define SAA7146_I2C_BUS_BIT_RATE_240	(0x700)
-#define SAA7146_I2C_BUS_BIT_RATE_120	(0x000)
-#define SAA7146_I2C_BUS_BIT_RATE_80	(0x200)
-#define SAA7146_I2C_BUS_BIT_RATE_60	(0x300)
-
-static inline void SAA7146_IER_DISABLE(struct saa7146_dev *x, unsigned y)
-{
-	unsigned long flags;
-	spin_lock_irqsave(&x->int_slock, flags);
-	saa7146_write(x, IER, saa7146_read(x, IER) & ~y);
-	spin_unlock_irqrestore(&x->int_slock, flags);
-}
-
-static inline void SAA7146_IER_ENABLE(struct saa7146_dev *x, unsigned y)
-{
-	unsigned long flags;
-	spin_lock_irqsave(&x->int_slock, flags);
-	saa7146_write(x, IER, saa7146_read(x, IER) | y);
-	spin_unlock_irqrestore(&x->int_slock, flags);
-}
-
-#endif
diff --git a/include/media/drv-intf/saa7146_vv.h b/include/media/drv-intf/saa7146_vv.h
deleted file mode 100644
index 635805fb35e8..000000000000
--- a/include/media/drv-intf/saa7146_vv.h
+++ /dev/null
@@ -1,266 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __SAA7146_VV__
-#define __SAA7146_VV__
-
-#include <media/v4l2-common.h>
-#include <media/v4l2-ioctl.h>
-#include <media/v4l2-fh.h>
-#include <media/drv-intf/saa7146.h>
-#include <media/videobuf-dma-sg.h>
-
-#define MAX_SAA7146_CAPTURE_BUFFERS	32	/* arbitrary */
-#define BUFFER_TIMEOUT     (HZ/2)  /* 0.5 seconds */
-
-#define WRITE_RPS0(x) do { \
-	dev->d_rps0.cpu_addr[ count++ ] = cpu_to_le32(x); \
-	} while (0);
-
-#define WRITE_RPS1(x) do { \
-	dev->d_rps1.cpu_addr[ count++ ] = cpu_to_le32(x); \
-	} while (0);
-
-struct	saa7146_video_dma {
-	u32 base_odd;
-	u32 base_even;
-	u32 prot_addr;
-	u32 pitch;
-	u32 base_page;
-	u32 num_line_byte;
-};
-
-#define FORMAT_BYTE_SWAP	0x1
-#define FORMAT_IS_PLANAR	0x2
-
-struct saa7146_format {
-	u32	pixelformat;
-	u32	trans;
-	u8	depth;
-	u8	flags;
-	u8	swap;
-};
-
-struct saa7146_standard
-{
-	char          *name;
-	v4l2_std_id   id;
-
-	int v_offset;	/* number of lines of vertical offset before processing */
-	int v_field;	/* number of lines in a field for HPS to process */
-
-	int h_offset;	/* horizontal offset of processing window */
-	int h_pixels;	/* number of horizontal pixels to process */
-
-	int v_max_out;
-	int h_max_out;
-};
-
-/* buffer for one video/vbi frame */
-struct saa7146_buf {
-	/* common v4l buffer stuff -- must be first */
-	struct videobuf_buffer vb;
-
-	/* saa7146 specific */
-	struct v4l2_pix_format  *fmt;
-	int (*activate)(struct saa7146_dev *dev,
-			struct saa7146_buf *buf,
-			struct saa7146_buf *next);
-
-	/* page tables */
-	struct saa7146_pgtable  pt[3];
-};
-
-struct saa7146_dmaqueue {
-	struct saa7146_dev	*dev;
-	struct saa7146_buf	*curr;
-	struct list_head	queue;
-	struct timer_list	timeout;
-};
-
-struct saa7146_overlay {
-	struct saa7146_fh	*fh;
-	struct v4l2_window	win;
-	struct v4l2_clip	clips[16];
-	int			nclips;
-};
-
-/* per open data */
-struct saa7146_fh {
-	/* Must be the first field! */
-	struct v4l2_fh		fh;
-	struct saa7146_dev	*dev;
-
-	/* video capture */
-	struct videobuf_queue	video_q;
-
-	/* vbi capture */
-	struct videobuf_queue	vbi_q;
-
-	unsigned int resources;	/* resource management for device open */
-};
-
-#define STATUS_OVERLAY	0x01
-#define STATUS_CAPTURE	0x02
-
-struct saa7146_vv
-{
-	/* vbi capture */
-	struct saa7146_dmaqueue		vbi_dmaq;
-	struct v4l2_vbi_format		vbi_fmt;
-	struct timer_list		vbi_read_timeout;
-	struct file			*vbi_read_timeout_file;
-	/* vbi workaround interrupt queue */
-	wait_queue_head_t		vbi_wq;
-	int				vbi_fieldcount;
-	struct saa7146_fh		*vbi_streaming;
-
-	int				video_status;
-	struct saa7146_fh		*video_fh;
-
-	/* video overlay */
-	struct saa7146_overlay		ov;
-	struct v4l2_framebuffer		ov_fb;
-	struct saa7146_format		*ov_fmt;
-	struct saa7146_fh		*ov_suspend;
-
-	/* video capture */
-	struct saa7146_dmaqueue		video_dmaq;
-	struct v4l2_pix_format		video_fmt;
-	enum v4l2_field			last_field;
-
-	/* common: fixme? shouldn't this be in saa7146_fh?
-	   (this leads to a more complicated question: shall the driver
-	   store the different settings (for example S_INPUT) for every open
-	   and restore it appropriately, or should all settings be common for
-	   all opens? currently, we do the latter, like all other
-	   drivers do... */
-	struct saa7146_standard	*standard;
-
-	int	vflip;
-	int	hflip;
-	int	current_hps_source;
-	int	current_hps_sync;
-
-	struct saa7146_dma	d_clipping;	/* pointer to clipping memory */
-
-	unsigned int resources;	/* resource management for device */
-};
-
-/* flags */
-#define SAA7146_USE_PORT_B_FOR_VBI	0x2     /* use input port b for vbi hardware bug workaround */
-
-struct saa7146_ext_vv
-{
-	/* information about the video capabilities of the device */
-	int	inputs;
-	int	audios;
-	u32	capabilities;
-	int	flags;
-
-	/* additionally supported transmission standards */
-	struct saa7146_standard *stds;
-	int num_stds;
-	int (*std_callback)(struct saa7146_dev*, struct saa7146_standard *);
-
-	/* the extension can override this */
-	struct v4l2_ioctl_ops vid_ops;
-	struct v4l2_ioctl_ops vbi_ops;
-	/* pointer to the saa7146 core ops */
-	const struct v4l2_ioctl_ops *core_ops;
-
-	struct v4l2_file_operations vbi_fops;
-};
-
-struct saa7146_use_ops  {
-	void (*init)(struct saa7146_dev *, struct saa7146_vv *);
-	int(*open)(struct saa7146_dev *, struct file *);
-	void (*release)(struct saa7146_dev *, struct file *);
-	void (*irq_done)(struct saa7146_dev *, unsigned long status);
-	ssize_t (*read)(struct file *, char __user *, size_t, loff_t *);
-};
-
-/* from saa7146_fops.c */
-int saa7146_register_device(struct video_device *vid, struct saa7146_dev *dev, char *name, int type);
-int saa7146_unregister_device(struct video_device *vid, struct saa7146_dev *dev);
-void saa7146_buffer_finish(struct saa7146_dev *dev, struct saa7146_dmaqueue *q, int state);
-void saa7146_buffer_next(struct saa7146_dev *dev, struct saa7146_dmaqueue *q,int vbi);
-int saa7146_buffer_queue(struct saa7146_dev *dev, struct saa7146_dmaqueue *q, struct saa7146_buf *buf);
-void saa7146_buffer_timeout(struct timer_list *t);
-void saa7146_dma_free(struct saa7146_dev* dev,struct videobuf_queue *q,
-						struct saa7146_buf *buf);
-
-int saa7146_vv_init(struct saa7146_dev* dev, struct saa7146_ext_vv *ext_vv);
-int saa7146_vv_release(struct saa7146_dev* dev);
-
-/* from saa7146_hlp.c */
-int saa7146_enable_overlay(struct saa7146_fh *fh);
-void saa7146_disable_overlay(struct saa7146_fh *fh);
-
-void saa7146_set_capture(struct saa7146_dev *dev, struct saa7146_buf *buf, struct saa7146_buf *next);
-void saa7146_write_out_dma(struct saa7146_dev* dev, int which, struct saa7146_video_dma* vdma) ;
-void saa7146_set_hps_source_and_sync(struct saa7146_dev *saa, int source, int sync);
-void saa7146_set_gpio(struct saa7146_dev *saa, u8 pin, u8 data);
-
-/* from saa7146_video.c */
-extern const struct v4l2_ioctl_ops saa7146_video_ioctl_ops;
-extern const struct v4l2_ioctl_ops saa7146_vbi_ioctl_ops;
-extern const struct saa7146_use_ops saa7146_video_uops;
-int saa7146_start_preview(struct saa7146_fh *fh);
-int saa7146_stop_preview(struct saa7146_fh *fh);
-long saa7146_video_do_ioctl(struct file *file, unsigned int cmd, void *arg);
-int saa7146_s_ctrl(struct v4l2_ctrl *ctrl);
-
-/* from saa7146_vbi.c */
-extern const struct saa7146_use_ops saa7146_vbi_uops;
-
-/* resource management functions */
-int saa7146_res_get(struct saa7146_fh *fh, unsigned int bit);
-void saa7146_res_free(struct saa7146_fh *fh, unsigned int bits);
-
-#define RESOURCE_DMA1_HPS	0x1
-#define RESOURCE_DMA2_CLP	0x2
-#define RESOURCE_DMA3_BRS	0x4
-
-/* saa7146 source inputs */
-#define SAA7146_HPS_SOURCE_PORT_A	0x00
-#define SAA7146_HPS_SOURCE_PORT_B	0x01
-#define SAA7146_HPS_SOURCE_YPB_CPA	0x02
-#define SAA7146_HPS_SOURCE_YPA_CPB	0x03
-
-/* sync inputs */
-#define SAA7146_HPS_SYNC_PORT_A		0x00
-#define SAA7146_HPS_SYNC_PORT_B		0x01
-
-/* some memory sizes */
-/* max. 16 clipping rectangles */
-#define SAA7146_CLIPPING_MEM	(16 * 4 * sizeof(u32))
-
-/* some defines for the various clipping-modes */
-#define SAA7146_CLIPPING_RECT		0x4
-#define SAA7146_CLIPPING_RECT_INVERTED	0x5
-#define SAA7146_CLIPPING_MASK		0x6
-#define SAA7146_CLIPPING_MASK_INVERTED	0x7
-
-/* output formats: each entry holds four information */
-#define RGB08_COMPOSED	0x0217 /* composed is used in the sense of "not-planar" */
-/* this means: planar?=0, yuv2rgb-conversation-mode=2, dither=yes(=1), format-mode = 7 */
-#define RGB15_COMPOSED	0x0213
-#define RGB16_COMPOSED	0x0210
-#define RGB24_COMPOSED	0x0201
-#define RGB32_COMPOSED	0x0202
-
-#define Y8			0x0006
-#define YUV411_COMPOSED		0x0003
-#define YUV422_COMPOSED		0x0000
-/* this means: planar?=1, yuv2rgb-conversion-mode=0, dither=no(=0), format-mode = b */
-#define YUV411_DECOMPOSED	0x100b
-#define YUV422_DECOMPOSED	0x1009
-#define YUV420_DECOMPOSED	0x100a
-
-#define IS_PLANAR(x) (x & 0xf000)
-
-/* misc defines */
-#define SAA7146_NO_SWAP		(0x0)
-#define SAA7146_TWO_BYTE_SWAP	(0x1)
-#define SAA7146_FOUR_BYTE_SWAP	(0x2)
-
-#endif