Merge tag 'mac80211-next-for-net-next-2019-11-08' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next

Johannes Berg says:

====================
Some relatively small changes:
 * typo fixes in docs
 * APIs for station separation using VLAN tags rather
   than separate wifi netdevs
 * some preparations for upcoming features (802.3 offload
   and airtime queue limits (AQL)
 * stack reduction in ieee80211_assoc_success()
 * use DEFINE_DEBUGFS_ATTRIBUTE in hwsim
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

2 files changed, 16 insertions, 10 deletions

diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index ab6850bbba99..5ded77fad7fb 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -565,6 +565,7 @@ struct vif_params {
  *	with the get_key() callback, must be in little endian,
  *	length given by @seq_len.
  * @seq_len: length of @seq.
+ * @vlan_id: vlan_id for VLAN group key (if nonzero)
  * @mode: key install mode (RX_TX, NO_TX or SET_TX)
  */
 struct key_params {
@@ -572,6 +573,7 @@ struct key_params {
 	const u8 *seq;
 	int key_len;
 	int seq_len;
+	u16 vlan_id;
 	u32 cipher;
 	enum nl80211_key_mode mode;
 };
@@ -1124,6 +1126,7 @@ struct sta_txpwr {
  *	(bitmask of BIT(%NL80211_STA_FLAG_...))
  * @listen_interval: listen interval or -1 for no change
  * @aid: AID or zero for no change
+ * @vlan_id: VLAN ID for station (if nonzero)
  * @peer_aid: mesh peer AID or zero for no change
  * @plink_action: plink action to take
  * @plink_state: set the peer link state for a station
@@ -1159,6 +1162,7 @@ struct station_parameters {
 	u32 sta_modify_mask;
 	int listen_interval;
 	u16 aid;
+	u16 vlan_id;
 	u16 peer_aid;
 	u8 supported_rates_len;
 	u8 plink_action;
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index d69081c38788..c643a19dce96 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -312,7 +312,7 @@ struct ieee80211_vif_chanctx_switch {
  * @BSS_CHANGED_KEEP_ALIVE: keep alive options (idle period or protected
  *	keep alive) changed.
  * @BSS_CHANGED_MCAST_RATE: Multicast Rate setting changed for this interface
- * @BSS_CHANGED_FTM_RESPONDER: fime timing reasurement request responder
+ * @BSS_CHANGED_FTM_RESPONDER: fine timing measurement request responder
  *	functionality changed for this BSS (AP mode).
  * @BSS_CHANGED_TWT: TWT status changed
  * @BSS_CHANGED_HE_OBSS_PD: OBSS Packet Detection status changed.
@@ -967,6 +967,7 @@ ieee80211_rate_get_vht_nss(const struct ieee80211_tx_rate *rate)
  * @band: the band to transmit on (use for checking for races)
  * @hw_queue: HW queue to put the frame on, skb_get_queue_mapping() gives the AC
  * @ack_frame_id: internal frame ID for TX status, used internally
+ * @tx_time_est: TX time estimate in units of 4us, used internally
  * @control: union part for control data
  * @control.rates: TX rates array to try
  * @control.rts_cts_rate_idx: rate for RTS or CTS
@@ -1007,7 +1008,8 @@ struct ieee80211_tx_info {
 
 	u8 hw_queue;
 
-	u16 ack_frame_id;
+	u16 ack_frame_id:6;
+	u16 tx_time_est:10;
 
 	union {
 		struct {
@@ -1059,7 +1061,7 @@ struct ieee80211_tx_info {
 };
 
 /**
- * struct ieee80211_tx_status - extended tx staus info for rate control
+ * struct ieee80211_tx_status - extended tx status info for rate control
  *
  * @sta: Station that the packet was transmitted for
  * @info: Basic tx status information
@@ -1702,7 +1704,7 @@ struct wireless_dev *ieee80211_vif_to_wdev(struct ieee80211_vif *vif);
  *	%IEEE80211_KEY_FLAG_SW_MGMT_TX flag to encrypt such frames in SW.
  * @IEEE80211_KEY_FLAG_GENERATE_IV_MGMT: This flag should be set by the
  *	driver for a CCMP/GCMP key to indicate that is requires IV generation
- *	only for managment frames (MFP).
+ *	only for management frames (MFP).
  * @IEEE80211_KEY_FLAG_RESERVE_TAILROOM: This flag should be set by the
  *	driver for a key to indicate that sufficient tailroom must always
  *	be reserved for ICV or MIC, even when HW encryption is enabled.
@@ -1998,7 +2000,7 @@ struct ieee80211_sta {
 	 *
 	 * * If the skb is transmitted as part of a BA agreement, the
 	 *   A-MSDU maximal size is min(max_amsdu_len, 4065) bytes.
-	 * * If the skb is not part of a BA aggreement, the A-MSDU maximal
+	 * * If the skb is not part of a BA agreement, the A-MSDU maximal
 	 *   size is min(max_amsdu_len, 7935) bytes.
 	 *
 	 * Both additional HT limits must be enforced by the low level
@@ -2626,7 +2628,7 @@ ieee80211_get_alt_retry_rate(const struct ieee80211_hw *hw,
  * @hw: the hardware
  * @skb: the skb
  *
- * Free a transmit skb. Use this funtion when some failure
+ * Free a transmit skb. Use this function when some failure
  * to transmit happened and thus status cannot be reported.
  */
 void ieee80211_free_txskb(struct ieee80211_hw *hw, struct sk_buff *skb);
@@ -3187,13 +3189,13 @@ enum ieee80211_rate_control_changed {
  *
  * With the support for multi channel contexts and multi channel operations,
  * remain on channel operations might be limited/deferred/aborted by other
- * flows/operations which have higher priority (and vise versa).
+ * flows/operations which have higher priority (and vice versa).
  * Specifying the ROC type can be used by devices to prioritize the ROC
  * operations compared to other operations/flows.
  *
  * @IEEE80211_ROC_TYPE_NORMAL: There are no special requirements for this ROC.
  * @IEEE80211_ROC_TYPE_MGMT_TX: The remain on channel request is required
- *	for sending managment frames offchannel.
+ *	for sending management frames offchannel.
  */
 enum ieee80211_roc_type {
 	IEEE80211_ROC_TYPE_NORMAL = 0,
@@ -5616,7 +5618,7 @@ void ieee80211_iter_keys_rcu(struct ieee80211_hw *hw,
 
 /**
  * ieee80211_iter_chan_contexts_atomic - iterate channel contexts
- * @hw: pointre obtained from ieee80211_alloc_hw().
+ * @hw: pointer obtained from ieee80211_alloc_hw().
  * @iter: iterator function
  * @iter_data: data passed to iterator function
  *
@@ -6364,7 +6366,7 @@ ieee80211_return_txq(struct ieee80211_hw *hw, struct ieee80211_txq *txq,
  * again.
  *
  * The API ieee80211_txq_may_transmit() also ensures that TXQ list will be
- * aligned aginst driver's own round-robin scheduler list. i.e it rotates
+ * aligned against driver's own round-robin scheduler list. i.e it rotates
  * the TXQ list till it makes the requested node becomes the first entry
  * in TXQ list. Thus both the TXQ list and driver's list are in sync. If this
  * function returns %true, the driver is expected to schedule packets