Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "This series consists of the usual driver updates (ufs, ibmvfc,
  megaraid_sas, lpfc, elx, mpi3mr, qedi, iscsi, storvsc, mpt3sas) with
  elx and mpi3mr being new drivers.

  The major core change is a rework to drop the status byte handling
  macros and the old bit shifted definitions and the rest of the updates
  are minor fixes"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (287 commits)
  scsi: aha1740: Avoid over-read of sense buffer
  scsi: arcmsr: Avoid over-read of sense buffer
  scsi: ips: Avoid over-read of sense buffer
  scsi: ufs: ufs-mediatek: Add missing of_node_put() in ufs_mtk_probe()
  scsi: elx: libefc: Fix IRQ restore in efc_domain_dispatch_frame()
  scsi: elx: libefc: Fix less than zero comparison of a unsigned int
  scsi: elx: efct: Fix pointer error checking in debugfs init
  scsi: elx: efct: Fix is_originator return code type
  scsi: elx: efct: Fix link error for _bad_cmpxchg
  scsi: elx: efct: Eliminate unnecessary boolean check in efct_hw_command_cancel()
  scsi: elx: efct: Do not use id uninitialized in efct_lio_setup_session()
  scsi: elx: efct: Fix error handling in efct_hw_init()
  scsi: elx: efct: Remove redundant initialization of variable lun
  scsi: elx: efct: Fix spelling mistake "Unexected" -> "Unexpected"
  scsi: lpfc: Fix build error in lpfc_scsi.c
  scsi: target: iscsi: Remove redundant continue statement
  scsi: qla4xxx: Remove redundant continue statement
  scsi: ppa: Switch to use module_parport_driver()
  scsi: imm: Switch to use module_parport_driver()
  scsi: mpt3sas: Fix error return value in _scsih_expander_add()
  ...

1 files changed, 74 insertions, 0 deletions

diff --git a/include/scsi/scsi_status.h b/include/scsi/scsi_status.h
new file mode 100644
index 000000000000..31d30cee1869
--- /dev/null
+++ b/include/scsi/scsi_status.h
@@ -0,0 +1,74 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef _SCSI_SCSI_STATUS_H
+#define _SCSI_SCSI_STATUS_H
+
+#include <linux/types.h>
+#include <scsi/scsi_proto.h>
+
+/* Message codes. */
+enum scsi_msg_byte {
+	COMMAND_COMPLETE	= 0x00,
+	EXTENDED_MESSAGE	= 0x01,
+	SAVE_POINTERS		= 0x02,
+	RESTORE_POINTERS	= 0x03,
+	DISCONNECT		= 0x04,
+	INITIATOR_ERROR		= 0x05,
+	ABORT_TASK_SET		= 0x06,
+	MESSAGE_REJECT		= 0x07,
+	NOP			= 0x08,
+	MSG_PARITY_ERROR	= 0x09,
+	LINKED_CMD_COMPLETE	= 0x0a,
+	LINKED_FLG_CMD_COMPLETE	= 0x0b,
+	TARGET_RESET		= 0x0c,
+	ABORT_TASK		= 0x0d,
+	CLEAR_TASK_SET		= 0x0e,
+	INITIATE_RECOVERY	= 0x0f,            /* SCSI-II only */
+	RELEASE_RECOVERY	= 0x10,            /* SCSI-II only */
+	TERMINATE_IO_PROC	= 0x11,            /* SCSI-II only */
+	CLEAR_ACA		= 0x16,
+	LOGICAL_UNIT_RESET	= 0x17,
+	SIMPLE_QUEUE_TAG	= 0x20,
+	HEAD_OF_QUEUE_TAG	= 0x21,
+	ORDERED_QUEUE_TAG	= 0x22,
+	IGNORE_WIDE_RESIDUE	= 0x23,
+	ACA			= 0x24,
+	QAS_REQUEST		= 0x55,
+
+	/* Old SCSI2 names, don't use in new code */
+	BUS_DEVICE_RESET	= TARGET_RESET,
+	ABORT			= ABORT_TASK_SET,
+};
+
+/* Host byte codes. */
+enum scsi_host_status {
+	DID_OK		= 0x00,	/* NO error                                */
+	DID_NO_CONNECT	= 0x01,	/* Couldn't connect before timeout period  */
+	DID_BUS_BUSY	= 0x02,	/* BUS stayed busy through time out period */
+	DID_TIME_OUT	= 0x03,	/* TIMED OUT for other reason              */
+	DID_BAD_TARGET	= 0x04,	/* BAD target.                             */
+	DID_ABORT	= 0x05,	/* Told to abort for some other reason     */
+	DID_PARITY	= 0x06,	/* Parity error                            */
+	DID_ERROR	= 0x07,	/* Internal error                          */
+	DID_RESET	= 0x08,	/* Reset by somebody.                      */
+	DID_BAD_INTR	= 0x09,	/* Got an interrupt we weren't expecting.  */
+	DID_PASSTHROUGH	= 0x0a,	/* Force command past mid-layer            */
+	DID_SOFT_ERROR	= 0x0b,	/* The low level driver just wish a retry  */
+	DID_IMM_RETRY	= 0x0c,	/* Retry without decrementing retry count  */
+	DID_REQUEUE	= 0x0d,	/* Requeue command (no immediate retry) also
+				 * without decrementing the retry count	   */
+	DID_TRANSPORT_DISRUPTED = 0x0e, /* Transport error disrupted execution
+					 * and the driver blocked the port to
+					 * recover the link. Transport class will
+					 * retry or fail IO */
+	DID_TRANSPORT_FAILFAST = 0x0f, /* Transport class fastfailed the io */
+	DID_TARGET_FAILURE = 0x10, /* Permanent target failure, do not retry on
+				    * other paths */
+	DID_NEXUS_FAILURE = 0x11,  /* Permanent nexus failure, retry on other
+				    * paths might yield different results */
+	DID_ALLOC_FAILURE = 0x12,  /* Space allocation on the device failed */
+	DID_MEDIUM_ERROR = 0x13,  /* Medium error */
+	DID_TRANSPORT_MARGINAL = 0x14, /* Transport marginal errors */
+};
+
+#endif /* _SCSI_SCSI_STATUS_H */