diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2025-01-22 08:28:57 -0800 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2025-01-22 08:28:57 -0800 |
commit | 0ad9617c78acbc71373fb341a6f75d4012b01d69 (patch) | |
tree | 602d7c9ec86d9a4891a96a2996af6e4368a647eb /lib/packing_test.c | |
parent | 5f537664e705b0bf8b7e329861f20128534f6a83 (diff) | |
parent | cf33d96f50903214226b379b3f10d1f262dae018 (diff) |
Merge tag 'net-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Paolo Abeni:
"This is slightly smaller than usual, with the most interesting work
being still around RTNL scope reduction.
Core:
- More core refactoring to reduce the RTNL lock contention, including
preparatory work for the per-network namespace RTNL lock, replacing
RTNL lock with a per device-one to protect NAPI-related net device
data and moving synchronize_net() calls outside such lock.
- Extend drop reasons usage, adding net scheduler, AF_UNIX, bridge
and more specific TCP coverage.
- Reduce network namespace tear-down time by removing per-subsystems
synchronize_net() in tipc and sched.
- Add flow label selector support for fib rules, allowing traffic
redirection based on such header field.
Netfilter:
- Do not remove netdev basechain when last device is gone, allowing
netdev basechains without devices.
- Revisit the flowtable teardown strategy, dealing better with fin,
reset and re-open events.
- Scale-up IP-vs connection dumping by avoiding linear search on each
restart.
Protocols:
- A significant XDP socket refactor, consolidating and optimizing
several helpers into the core
- Better scaling of ICMP rate-limiting, by removing false-sharing in
inet peers handling.
- Introduces netlink notifications for multicast IPv4 and IPv6
address changes.
- Add ipsec support for IP-TFS/AggFrag encapsulation, allowing
aggregation and fragmentation of the inner IP.
- Add sysctl to configure TIME-WAIT reuse delay for TCP sockets, to
avoid local port exhaustion issues when the average connection
lifetime is very short.
- Support updating keys (re-keying) for connections using kernel TLS
(for TLS 1.3 only).
- Support ipv4-mapped ipv6 address clients in smc-r v2.
- Add support for jumbo data packet transmission in RxRPC sockets,
gluing multiple data packets in a single UDP packet.
- Support RxRPC RACK-TLP to manage packet loss and retransmission in
conjunction with the congestion control algorithm.
Driver API:
- Introduce a unified and structured interface for reporting PHY
statistics, exposing consistent data across different H/W via
ethtool.
- Make timestamping selectable, allow the user to select the desired
hwtstamp provider (PHY or MAC) administratively.
- Add support for configuring a header-data-split threshold (HDS)
value via ethtool, to deal with partial or buggy H/W
implementation.
- Consolidate DSA drivers Energy Efficiency Ethernet support.
- Add EEE management to phylink, making use of the phylib
implementation.
- Add phylib support for in-band capabilities negotiation.
- Simplify how phylib-enabled mac drivers expose the supported
interfaces.
Tests and tooling:
- Make the YNL tool package-friendly to make it easier to deploy it
separately from the kernel.
- Increase TCP selftest coverage importing several packetdrill
test-cases.
- Regenerate the ethtool uapi header from the YNL spec, to ease
maintenance and future development.
- Add YNL support for decoding the link types used in net self-tests,
allowing a single build to run both net and drivers/net.
Drivers:
- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- add cross E-Switch QoS support
- add SW Steering support for ConnectX-8
- implement support for HW-Managed Flow Steering, improving the
rule deletion/insertion rate
- support for multi-host LAG
- Intel (ixgbe, ice, igb):
- ice: add support for devlink health events
- ixgbe: add initial support for E610 chipset variant
- igb: add support for AF_XDP zero-copy
- Meta:
- add support for basic RSS config
- allow changing the number of channels
- add hardware monitoring support
- Broadcom (bnxt):
- implement TCP data split and HDS threshold ethtool support,
enabling Device Memory TCP.
- Marvell Octeon:
- implement egress ipsec offload support for the cn10k family
- Hisilicon (HIBMC):
- implement unicast MAC filtering
- Ethernet NICs embedded and virtual:
- Convert UDP tunnel drivers to NETDEV_PCPU_STAT_DSTATS, avoiding
contented atomic operations for drop counters
- Freescale:
- quicc: phylink conversion
- enetc: support Tx and Rx checksum offload and improve TSO
performances
- MediaTek:
- airoha: introduce support for ETS and HTB Qdisc offload
- Microchip:
- lan78XX USB: preparation work for phylink conversion
- Synopsys (stmmac):
- support DWMAC IP on NXP Automotive SoCs S32G2xx/S32G3xx/S32R45
- refactor EEE support to leverage the new driver API
- optimize DMA and cache access to increase raw RX performances
by 40%
- TI:
- icssg-prueth: add multicast filtering support for VLAN
interface
- netkit:
- add ability to configure head/tailroom
- VXLAN:
- accepts packets with user-defined reserved bit
- Ethernet switches:
- Microchip:
- lan969x: add RGMII support
- lan969x: improve TX and RX performance using the FDMA engine
- nVidia/Mellanox:
- move Tx header handling to PCI driver, to ease XDP support
- Ethernet PHYs:
- Texas Instruments DP83822:
- add support for GPIO2 clock output
- Realtek:
- 8169: add support for RTL8125D rev.b
- rtl822x: add hwmon support for the temperature sensor
- Microchip:
- add support for RDS PTP hardware
- consolidate periodic output signal generation
- CAN:
- several DT-bindings to DT schema conversions
- tcan4x5x:
- add HW standby support
- support nWKRQ voltage selection
- kvaser:
- allowing Bus Error Reporting runtime configuration
- WiFi:
- the on-going Multi-Link Operation (MLO) effort continues,
affecting both the stack and in drivers
- mac80211/cfg80211:
- Emergency Preparedness Communication Services (EPCS) station
mode support
- support for adding and removing station links for MLO
- add support for WiFi 7/EHT mesh over 320 MHz channels
- report Tx power info for each link
- RealTek (rtw88):
- enable USB Rx aggregation and USB 3 to improve performance
- LED support
- RealTek (rtw89):
- refactor power save to support Multi-Link Operations
- add support for RTL8922AE-VS variant
- MediaTek (mt76):
- single wiphy multiband support (preparation for MLO)
- p2p device support
- add TP-Link TXE50UH USB adapter support
- Qualcomm (ath10k):
- support for the QCA6698AQ IP core
- Qualcomm (ath12k):
- enable MLO for QCN9274
- Bluetooth:
- Allow sysfs to trigger hdev reset, to allow recovering devices
not responsive from user-space
- MediaTek: add support for MT7922, MT7925, MT7921e devices
- Realtek: add support for RTL8851BE devices
- Qualcomm: add support for WCN785x devices
- ISO: allow BIG re-sync"
* tag 'net-next-6.14' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1386 commits)
net/rose: prevent integer overflows in rose_setsockopt()
net: phylink: fix regression when binding a PHY
net: ethernet: ti: am65-cpsw: streamline TX queue creation and cleanup
net: ethernet: ti: am65-cpsw: streamline RX queue creation and cleanup
net: ethernet: ti: am65-cpsw: ensure proper channel cleanup in error path
ipv6: Convert inet6_rtm_deladdr() to per-netns RTNL.
ipv6: Convert inet6_rtm_newaddr() to per-netns RTNL.
ipv6: Move lifetime validation to inet6_rtm_newaddr().
ipv6: Set cfg.ifa_flags before device lookup in inet6_rtm_newaddr().
ipv6: Pass dev to inet6_addr_add().
ipv6: Convert inet6_ioctl() to per-netns RTNL.
ipv6: Hold rtnl_net_lock() in addrconf_init() and addrconf_cleanup().
ipv6: Hold rtnl_net_lock() in addrconf_dad_work().
ipv6: Hold rtnl_net_lock() in addrconf_verify_work().
ipv6: Convert net.ipv6.conf.${DEV}.XXX sysctl to per-netns RTNL.
ipv6: Add __in6_dev_get_rtnl_net().
net: stmmac: Drop redundant skb_mark_for_recycle() for SKB frags
net: mii: Fix the Speed display when the network cable is not connected
sysctl net: Remove macro checks for CONFIG_SYSCTL
eth: bnxt: update header sizing defaults
...
Diffstat (limited to 'lib/packing_test.c')
-rw-r--r-- | lib/packing_test.c | 61 |
1 files changed, 61 insertions, 0 deletions
diff --git a/lib/packing_test.c b/lib/packing_test.c index b38ea43c03fd..ce3b83d33b04 100644 --- a/lib/packing_test.c +++ b/lib/packing_test.c @@ -396,9 +396,70 @@ static void packing_test_unpack(struct kunit *test) KUNIT_EXPECT_EQ(test, uval, params->uval); } +#define PACKED_BUF_SIZE 8 + +typedef struct __packed { u8 buf[PACKED_BUF_SIZE]; } packed_buf_t; + +struct test_data { + u32 field3; + u16 field2; + u16 field4; + u16 field6; + u8 field1; + u8 field5; +}; + +static const struct packed_field_u8 test_fields[] = { + PACKED_FIELD(63, 61, struct test_data, field1), + PACKED_FIELD(60, 52, struct test_data, field2), + PACKED_FIELD(51, 28, struct test_data, field3), + PACKED_FIELD(27, 14, struct test_data, field4), + PACKED_FIELD(13, 9, struct test_data, field5), + PACKED_FIELD(8, 0, struct test_data, field6), +}; + +static void packing_test_pack_fields(struct kunit *test) +{ + const struct test_data data = { + .field1 = 0x2, + .field2 = 0x100, + .field3 = 0xF00050, + .field4 = 0x7D3, + .field5 = 0x9, + .field6 = 0x10B, + }; + packed_buf_t expect = { + .buf = { 0x50, 0x0F, 0x00, 0x05, 0x01, 0xF4, 0xD3, 0x0B }, + }; + packed_buf_t buf = {}; + + pack_fields(&buf, sizeof(buf), &data, test_fields, 0); + + KUNIT_EXPECT_MEMEQ(test, &expect, &buf, sizeof(buf)); +} + +static void packing_test_unpack_fields(struct kunit *test) +{ + const packed_buf_t buf = { + .buf = { 0x17, 0x28, 0x10, 0x19, 0x3D, 0xA9, 0x07, 0x9C }, + }; + struct test_data data = {}; + + unpack_fields(&buf, sizeof(buf), &data, test_fields, 0); + + KUNIT_EXPECT_EQ(test, 0, data.field1); + KUNIT_EXPECT_EQ(test, 0x172, data.field2); + KUNIT_EXPECT_EQ(test, 0x810193, data.field3); + KUNIT_EXPECT_EQ(test, 0x36A4, data.field4); + KUNIT_EXPECT_EQ(test, 0x3, data.field5); + KUNIT_EXPECT_EQ(test, 0x19C, data.field6); +} + static struct kunit_case packing_test_cases[] = { KUNIT_CASE_PARAM(packing_test_pack, packing_gen_params), KUNIT_CASE_PARAM(packing_test_unpack, packing_gen_params), + KUNIT_CASE(packing_test_pack_fields), + KUNIT_CASE(packing_test_unpack_fields), {}, }; |