Merge series "Support ROHM BD9576MUF and BD9573MUF PMICs" from Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>:

Initial support for ROHM BD9576MUF and BD9573MUF PMICs.

These PMICs are primarily intended to be used to power the R-Car family
processors. BD9576MUF includes some additional safety features the
BD9573MUF does not have. This initial version of drivers does not
utilize these features and for now the SW behaviour is identical.

Please note that this version of drivers is only tested on BD9576MUF
but according to the data-sheets the relevant parts of registers should
be same so drivers should also work on BD9573MUF.

This patch series includes MFD, watchdog and regulator drivers with
basic functionality such as:

- Enabling and pinging the watchdog
- configuring watchog timeout / window from device-tree
- reading regulator states/voltages
- enabling/disabling VOUT1 (VD50) when control mode B is used.

This patch series does not bring interrupt support. BD9576MUF and BD9573MUF
are designed to keep the IRQ line low for whole duration of error
condition. IRQ can't be 'acked'. So proper IRQ support would require
some IRQ limiter implementation (delayed unmask?) in order to not hog
the CPU.

---

Matti Vaittinen (6):
  dt_bindings: mfd: Add ROHM BD9576MUF and BD9573MUF PMICs
  dt_bindings: regulator: Add ROHM BD9576MUF and BD9573MUF PMICs
  mfd: Support ROHM BD9576MUF and BD9573MUF
  wdt: Support wdt on ROHM BD9576MUF and BD9573MUF
  regulator: Support ROHM BD9576MUF and BD9573MUF
  MAINTAINERS: Add ROHM BD9576MUF and BD9573MUF drivers

 .../bindings/mfd/rohm,bd9576-pmic.yaml        | 129 +++++++
 .../regulator/rohm,bd9576-regulator.yaml      |  33 ++
 MAINTAINERS                                   |   4 +
 drivers/mfd/Kconfig                           |  11 +
 drivers/mfd/Makefile                          |   1 +
 drivers/mfd/rohm-bd9576.c                     | 130 +++++++
 drivers/regulator/Kconfig                     |  10 +
 drivers/regulator/Makefile                    |   1 +
 drivers/regulator/bd9576-regulator.c          | 337 ++++++++++++++++++
 drivers/watchdog/Kconfig                      |  13 +
 drivers/watchdog/Makefile                     |   1 +
 drivers/watchdog/bd9576_wdt.c                 | 295 +++++++++++++++
 include/linux/mfd/rohm-bd957x.h               |  61 ++++
 include/linux/mfd/rohm-generic.h              |   2 +
 14 files changed, 1028 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/rohm,bd9576-pmic.yaml
 create mode 100644 Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml
 create mode 100644 drivers/mfd/rohm-bd9576.c
 create mode 100644 drivers/regulator/bd9576-regulator.c
 create mode 100644 drivers/watchdog/bd9576_wdt.c
 create mode 100644 include/linux/mfd/rohm-bd957x.h

base-commit: f4d51dffc6c01a9e94650d95ce0104964f8ae822
--
2.21.0

--
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND

~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
Simon says - in Latin please.
~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~
Thanks to Simon Glass for the translation =]

1 files changed, 6 insertions, 36 deletions

diff --git a/mm/gup.c b/mm/gup.c
index ae096ea7583f..e5739a1974d5 100644
--- a/mm/gup.c
+++ b/mm/gup.c
@@ -381,22 +381,13 @@ static int follow_pfn_pte(struct vm_area_struct *vma, unsigned long address,
 }
 
 /*
- * FOLL_FORCE or a forced COW break can write even to unwritable pte's,
- * but only after we've gone through a COW cycle and they are dirty.
+ * FOLL_FORCE can write to even unwritable pte's, but only
+ * after we've gone through a COW cycle and they are dirty.
  */
 static inline bool can_follow_write_pte(pte_t pte, unsigned int flags)
 {
-	return pte_write(pte) || ((flags & FOLL_COW) && pte_dirty(pte));
-}
-
-/*
- * A (separate) COW fault might break the page the other way and
- * get_user_pages() would return the page from what is now the wrong
- * VM. So we need to force a COW break at GUP time even for reads.
- */
-static inline bool should_force_cow_break(struct vm_area_struct *vma, unsigned int flags)
-{
-	return is_cow_mapping(vma->vm_flags) && (flags & (FOLL_GET | FOLL_PIN));
+	return pte_write(pte) ||
+		((flags & FOLL_FORCE) && (flags & FOLL_COW) && pte_dirty(pte));
 }
 
 static struct page *follow_page_pte(struct vm_area_struct *vma,
@@ -843,7 +834,7 @@ static int get_gate_page(struct mm_struct *mm, unsigned long address,
 			goto unmap;
 		*page = pte_page(*pte);
 	}
-	if (unlikely(!try_get_page(*page))) {
+	if (unlikely(!try_grab_page(*page, gup_flags))) {
 		ret = -ENOMEM;
 		goto unmap;
 	}
@@ -1067,11 +1058,9 @@ static long __get_user_pages(struct mm_struct *mm,
 				goto out;
 			}
 			if (is_vm_hugetlb_page(vma)) {
-				if (should_force_cow_break(vma, foll_flags))
-					foll_flags |= FOLL_WRITE;
 				i = follow_hugetlb_page(mm, vma, pages, vmas,
 						&start, &nr_pages, i,
-						foll_flags, locked);
+						gup_flags, locked);
 				if (locked && *locked == 0) {
 					/*
 					 * We've got a VM_FAULT_RETRY
@@ -1085,10 +1074,6 @@ static long __get_user_pages(struct mm_struct *mm,
 				continue;
 			}
 		}
-
-		if (should_force_cow_break(vma, foll_flags))
-			foll_flags |= FOLL_WRITE;
-
 retry:
 		/*
 		 * If we have a pending SIGKILL, don't keep faulting pages and
@@ -2689,19 +2674,6 @@ static int internal_get_user_pages_fast(unsigned long start, int nr_pages,
 		return -EFAULT;
 
 	/*
-	 * The FAST_GUP case requires FOLL_WRITE even for pure reads,
-	 * because get_user_pages() may need to cause an early COW in
-	 * order to avoid confusing the normal COW routines. So only
-	 * targets that are already writable are safe to do by just
-	 * looking at the page tables.
-	 *
-	 * NOTE! With FOLL_FAST_ONLY we allow read-only gup_fast() here,
-	 * because there is no slow path to fall back on. But you'd
-	 * better be careful about possible COW pages - you'll get _a_
-	 * COW page, but not necessarily the one you intended to get
-	 * depending on what COW event happens after this. COW may break
-	 * the page copy in a random direction.
-	 *
 	 * Disable interrupts. The nested form is used, in order to allow
 	 * full, general purpose use of this routine.
 	 *
@@ -2714,8 +2686,6 @@ static int internal_get_user_pages_fast(unsigned long start, int nr_pages,
 	 */
 	if (IS_ENABLED(CONFIG_HAVE_FAST_GUP) && gup_fast_permitted(start, end)) {
 		unsigned long fast_flags = gup_flags;
-		if (!(gup_flags & FOLL_FAST_ONLY))
-			fast_flags |= FOLL_WRITE;
 
 		local_irq_save(flags);
 		gup_pgd_range(addr, end, fast_flags, pages, &nr_pinned);