mm: zswap: support large folios in zswap_store()

This series enables zswap_store() to accept and store large folios.  The
most significant contribution in this series is from the earlier RFC
submitted by Ryan Roberts [1].  Ryan's original RFC has been migrated to
mm-unstable as of 9-30-2024 in patch 6 of this series, and adapted based
on code review comments received for the current patch-series.

[1]: [RFC PATCH v1] mm: zswap: Store large folios without splitting
     https://lore.kernel.org/linux-mm/20231019110543.3284654-1-ryan.roberts@arm.com/T/#u

The first few patches do the prep work for supporting large folios in
zswap_store.  Patch 6 provides the main functionality to swap-out large
folios in zswap.  Patch 7 adds sysfs per-order hugepages "zswpout"
counters that get incremented upon successful zswap_store of large folios,
and also updates the documentation for this:

/sys/kernel/mm/transparent_hugepage/hugepages-*kB/stats/zswpout

This series is a pre-requisite for zswap compress batching of large folio
swap-out and decompress batching of swap-ins based on swapin_readahead(),
using Intel IAA hardware acceleration, which we would like to submit in
subsequent patch-series, with performance improvement data.

Thanks to Ying Huang for pre-posting review feedback and suggestions!

Thanks also to Nhat, Yosry, Johannes, Barry, Chengming, Usama, Ying and
Matthew for their helpful feedback, code/data reviews and suggestions!

I would like to thank Ryan Roberts for his original RFC [1].


System setup for testing:
=========================

Testing of this series was done with mm-unstable as of 9-27-2024, commit
de2fbaa6d9c3576ec7133ed02a370ec9376bf000 (without this patch-series) and
mm-unstable 9-30-2024 commit c121617e3606be6575cdacfdb63cc8d67b46a568
(with this patch-series).  Data was gathered on an Intel Sapphire Rapids
server, dual-socket 56 cores per socket, 4 IAA devices per socket, 503 GiB
RAM and 525G SSD disk partition swap.  Core frequency was fixed at
2500MHz.

The vm-scalability "usemem" test was run in a cgroup whose memory.high was
fixed at 150G.  The is no swap limit set for the cgroup.  30 usemem
processes were run, each allocating and writing 10G of memory, and
sleeping for 10 sec before exiting:

usemem --init-time -w -O -s 10 -n 30 10g

Other kernel configuration parameters:

    zswap compressors : zstd, deflate-iaa
    zswap allocator   : zsmalloc
    vm.page-cluster   : 2

In the experiments where "deflate-iaa" is used as the zswap compressor,
IAA "compression verification" is enabled by default (cat
/sys/bus/dsa/drivers/crypto/verify_compress).  Hence each IAA compression
will be decompressed internally by the "iaa_crypto" driver, the crc-s
returned by the hardware will be compared and errors reported in case of
mismatches.  Thus "deflate-iaa" helps ensure better data integrity as
compared to the software compressors, and the experimental data listed
below is with verify_compress set to "1".

Metrics reporting methodology:
==============================
Total and average throughput are derived from the individual 30 processes'
throughputs reported by usemem.  elapsed/sys times are measured with perf.

All percentage changes are "new" vs.  "old"; hence a positive value
denotes an increase in the metric, whether it is throughput or latency,
and a negative value denotes a reduction in the metric.  Positive
throughput change percentages and negative latency change percentages
denote improvements.

The vm stats and sysfs hugepages stats included with the performance data
provide details on the swapout activity to zswap/swap device.


Testing labels used in data summaries:
======================================
The data refers to these test configurations and the before/after
comparisons that they do:

 before-case1:
 -------------
 mm-unstable 9-27-2024, CONFIG_THP_SWAP=N (compares zswap 4K vs. zswap 64K)

 In this scenario, CONFIG_THP_SWAP=N results in 64K/2M folios to be split
 into 4K folios that get processed by zswap.

 before-case2:
 -------------
 mm-unstable 9-27-2024, CONFIG_THP_SWAP=Y (compares SSD swap large folios vs. zswap large folios)

 In this scenario, CONFIG_THP_SWAP=Y results in zswap rejecting large
 folios, which will then be stored by the SSD swap device.

 after:
 ------
 v10 of this patch-series, CONFIG_THP_SWAP=Y

 The "after" is CONFIG_THP_SWAP=Y and v10 of this patch-series, that results
 in 64K/2M folios to not be split, and to be processed by zswap_store.


Regression Testing:
===================
I ran vm-scalability usemem without large folios, i.e., only 4K folios with
mm-unstable and this patch-series. The main goal was to make sure that
there is no functional or performance regression wrt the earlier zswap
behavior for 4K folios, now that 4K folios will be processed by the new
zswap_store() code.

The data indicates there is no significant regression.

 -------------------------------------------------------------------------------
 4K folios:
 ==========

 zswap compressor                zstd          zstd        zstd       zstd v10
                         before-case1  before-case2       after      vs.     vs.
                                                                   case1   case2
 -------------------------------------------------------------------------------
 Total throughput (KB/s)    4,793,363     4,880,978   4,853,074       1%     -1%
 Average throughput (KB/s)    159,778       162,699     161,769       1%     -1%
 elapsed time (sec)            130.14        123.17      126.29      -3%      3%
 sys time (sec)              3,135.53      2,985.64    3,083.18      -2%      3%
 memcg_high                   446,826       444,626     452,930        
 memcg_swap_fail                    0             0           0              
 zswpout                   48,932,107    48,931,971  48,931,820             
 zswpin                           383           386         397            
 pswpout                            0             0           0              
 pswpin                             0             0           0              
 thp_swpout                         0             0           0              
 thp_swpout_fallback                0             0           0              
 64kB-mthp_swpout_fallback          0             0           0              
 pgmajfault                     3,063         3,077       3,479          
 swap_ra                           93            94          96             
 swap_ra_hit                       47            47          50             
 ZSWPOUT-64kB                     n/a           n/a           0              
 SWPOUT-64kB                        0             0           0
 -------------------------------------------------------------------------------


Performance Testing:
====================

We list the data for 64K folios with before/after data per-compressor,
followed by the same for 2M pmd-mappable folios.


 -------------------------------------------------------------------------------
 64K folios: zstd:
 =================

 zswap compressor                zstd          zstd         zstd      zstd v10
                         before-case1  before-case2        after     vs.    vs.
                                                                    case1  case2
 -------------------------------------------------------------------------------
 Total throughput (KB/s)    5,222,213     1,076,611    6,159,776      18%   472% 
 Average throughput (KB/s)    174,073        35,887      205,325      18%   472%
 elapsed time (sec)            120.50        347.16       108.33     -10%   -69%
 sys time (sec)              2,930.33        248.16     2,549.65     -13%   927%
 memcg_high                   416,773       552,200      465,874                   
 memcg_swap_fail            3,192,906         1,293        1,012                   
 zswpout                   48,931,583        20,903   48,931,218                  
 zswpin                           384           363          410                   
 pswpout                            0    40,778,448            0                   
 pswpin                             0            16            0                   
 thp_swpout                         0             0            0                   
 thp_swpout_fallback                0             0            0                   
 64kB-mthp_swpout_fallback  3,192,906         1,293        1,012                   
 pgmajfault                     3,452         3,072        3,061                   
 swap_ra                           90            87          107                   
 swap_ra_hit                       42            43           57                   
 ZSWPOUT-64kB                     n/a           n/a    3,057,173                   
 SWPOUT-64kB                        0     2,548,653            0                   
 -------------------------------------------------------------------------------


 -------------------------------------------------------------------------------
 64K folios: deflate-iaa:
 ========================

 zswap compressor         deflate-iaa   deflate-iaa  deflate-iaa deflate-iaa v10
                         before-case1  before-case2        after     vs.     vs.
                                                                   case1   case2
 -------------------------------------------------------------------------------
 Total throughput (KB/s)    5,652,608     1,089,180    7,189,778     27%    560% 
 Average throughput (KB/s)    188,420        36,306      239,659     27%    560%
 elapsed time (sec)            102.90        343.35        87.05    -15%    -75%
 sys time (sec)              2,246.86        213.53     1,864.16    -17%    773%
 memcg_high                   576,104       502,907      642,083                    
 memcg_swap_fail            4,016,117         1,407        1,478                    
 zswpout                   61,163,423        22,444   57,798,716                    
 zswpin                           401           368          454                    
 pswpout                            0    40,862,080            0                    
 pswpin                             0            20            0                    
 thp_swpout                         0             0            0                    
 thp_swpout_fallback                0             0            0                    
 64kB-mthp_swpout_fallback  4,016,117         1,407        1,478                    
 pgmajfault                     3,063         3,153        3,122                    
 swap_ra                           96            93          156                    
 swap_ra_hit                       46            45           83                    
 ZSWPOUT-64kB                     n/a           n/a    3,611,032                    
 SWPOUT-64kB                        0     2,553,880            0                  
 -------------------------------------------------------------------------------


 -------------------------------------------------------------------------------
 2M folios: zstd:
 ================

 zswap compressor                zstd          zstd         zstd      zstd v10
                         before-case1  before-case2        after     vs.    vs.
                                                                   case1  case2
 -------------------------------------------------------------------------------
 Total throughput (KB/s)    5,895,500     1,109,694    6,484,224     10%    484%
 Average throughput (KB/s)    196,516        36,989      216,140     10%    484%
 elapsed time (sec)            108.77        334.28       106.33     -2%    -68%
 sys time (sec)              2,657.14         94.88     2,376.13    -11%   2404%
 memcg_high                    64,200        66,316       56,898                  
 memcg_swap_fail              101,182            70           27                  
 zswpout                   48,931,499        36,507   48,890,640                  
 zswpin                           380           379          377                  
 pswpout                            0    40,166,400            0                  
 pswpin                             0             0            0                  
 thp_swpout                         0        78,450            0                  
 thp_swpout_fallback          101,182            70           27                  
 2MB-mthp_swpout_fallback           0             0           27                  
 pgmajfault                     3,067         3,417        3,311                  
 swap_ra                           91            90          854                  
 swap_ra_hit                       45            45          810                  
 ZSWPOUT-2MB                      n/a           n/a       95,459                  
 SWPOUT-2MB                         0        78,450            0                 
 -------------------------------------------------------------------------------


 -------------------------------------------------------------------------------
 2M folios: deflate-iaa:
 =======================

 zswap compressor         deflate-iaa   deflate-iaa  deflate-iaa deflate-iaa v10
                         before-case1  before-case2        after     vs.     vs.
                                                                   case1   case2
 -------------------------------------------------------------------------------
 Total throughput (KB/s)   6,286,587      1,126,785    7,073,464     13%    528%
 Average throughput (KB/s)   209,552         37,559      235,782     13%    528%
 elapsed time (sec)            96.19         333.03        85.79    -11%    -74%
 sys time (sec)             2,141.44          99.96     1,826.67    -15%   1727%
 memcg_high                   99,253         64,666       79,718                    
 memcg_swap_fail             129,074             53          165                    
 zswpout                  61,312,794         28,321   56,045,120                    
 zswpin                          383            406          403                    
 pswpout                           0     40,048,128            0                    
 pswpin                            0              0            0                    
 thp_swpout                        0         78,219            0                    
 thp_swpout_fallback         129,074             53          165                    
 2MB-mthp_swpout_fallback          0              0          165                    
 pgmajfault                    3,430          3,077       31,468                    
 swap_ra                          91            103       84,373                    
 swap_ra_hit                      47             46       84,317                    
 ZSWPOUT-2MB                     n/a            n/a      109,229                    
 SWPOUT-2MB                        0         78,219            0                
 -------------------------------------------------------------------------------


And finally, this is a comparison of deflate-iaa vs. zstd with v10 of this
patch-series:

 ---------------------------------------------
                  zswap_store large folios v10
                  Impr w/ deflate-iaa vs. zstd

                       64K folios    2M folios
 ---------------------------------------------
 Throughput (KB/s)            17%           9%
 elapsed time (sec)          -20%         -19%
 sys time (sec)              -27%         -23%
 ---------------------------------------------


Conclusions based on the performance results:
=============================================

 v10 wrt before-case1:
 ---------------------
 We see significant improvements in throughput, elapsed and sys time for
 zstd and deflate-iaa, when comparing before-case1 (THP_SWAP=N) vs. after
 (THP_SWAP=Y) with zswap_store large folios.

 v10 wrt before-case2:
 ---------------------
 We see even more significant improvements in throughput and elapsed time
 for zstd and deflate-iaa, when comparing before-case2 (large-folio-SSD)
 vs. after (large-folio-zswap). The sys time increases with
 large-folio-zswap as expected, due to the CPU compression time
 vs. asynchronous disk write times, as pointed out by Ying and Yosry.
 
 In before-case2, when zswap does not store large folios, only allocations
 and cgroup charging due to 4K folio zswap stores count towards the cgroup
 memory limit. However, in the after scenario, with the introduction of
 zswap_store() of large folios, there is an added component of the zswap
 compressed pool usage from large folio stores from potentially all 30
 processes, that gets counted towards the memory limit. As a result, we see
 higher swapout activity in the "after" data.


Summary:
========
The v10 data presented above shows that zswap_store of large folios
demonstrates good throughput/performance improvements compared to
conventional SSD swap of large folios with a sufficiently large 525G SSD
swap device. Hence, it seems reasonable for zswap_store to support large
folios, so that further performance improvements can be implemented.

In the experimental setup used in this patchset, we have enabled IAA
compress verification to ensure additional hardware data integrity CRC
checks not currently done by the software compressors. We see good
throughput/latency improvements with deflate-iaa vs. zstd with zswap_store
of large folios.

Some of the ideas for further reducing latency that have shown promise in
our experiments, are:

1) IAA compress/decompress batching.
2) Distributing compress jobs across all IAA devices on the socket.

The tests run for this patchset are using only 1 IAA device per core, that
avails of 2 compress engines on the device. In our experiments with IAA
batching, we distribute compress jobs from all cores to the 8 compress
engines available per socket. We further compress the pages in each folio
in parallel in the accelerator. As a result, we improve compress latency
and reclaim throughput.

In decompress batching, we use swapin_readahead to generate a prefetch
batch of 4K folios that we decompress in parallel in IAA.

 ------------------------------------------------------------------------------
                          IAA compress/decompress batching
              Further improvements wrt v10 zswap_store Sequential
                          subpage store using "deflate-iaa":
                       
                      "deflate-iaa" Batching  "deflate-iaa-canned" [2] Batching
                          Additional Impr               Additional Impr   
                     64K folios    2M folios     64K folios    2M folios
 ------------------------------------------------------------------------------
 Throughput (KB/s)          19%          43%           26%           55%
 elapsed time (sec)         -5%         -14%          -10%          -21%
 sys time (sec)              4%          -7%           -4%          -18%
 ------------------------------------------------------------------------------


With zswap IAA compress/decompress batching, we are able to demonstrate
significant performance improvements and memory savings in server
scalability experiments in highly contended system scenarios under
significant memory pressure; as compared to software compressors.  We hope
to submit this work in subsequent patch series.  The current patch-series
is a prequisite for these future submissions.


This patch (of 7):

zswap_store() will store large folios by compressing them page by page.

This patch provides a sequential implementation of storing a large folio
in zswap_store() by iterating through each page in the folio to compress
and store it in the zswap zpool.

zswap_store() calls the newly added zswap_store_page() function for each
page in the folio.  zswap_store_page() handles compressing and storing
each page.

We check the global and per-cgroup limits once at the beginning of
zswap_store(), and only check that the limit is not reached yet.  This is
racy and inaccurate, but it should be sufficient for now.  We also obtain
initial references to the relevant objcg and pool to guarantee that
subsequent references can be acquired by zswap_store_page().  A new
function zswap_pool_get() is added to facilitate this.

If these one-time checks pass, we compress the pages of the folio, while
maintaining a running count of compressed bytes for all the folio's pages.
If all pages are successfully compressed and stored, we do the cgroup
zswap charging with the total compressed bytes, and batch update the
zswap_stored_pages atomic/zswpout event stats with folio_nr_pages() once,
before returning from zswap_store().

If an error is encountered during the store of any page in the folio, all
pages in that folio currently stored in zswap will be invalidated.  Thus,
a folio is either entirely stored in zswap, or entirely not stored in
zswap.

The most important value provided by this patch is it enables swapping out
large folios to zswap without splitting them.  Furthermore, it batches
some operations while doing so (cgroup charging, stats updates).

This patch also forms the basis for building compress batching of pages in
a large folio in zswap_store() by compressing up to say, 8 pages of the
folio in parallel in hardware using the Intel In-Memory Analytics
Accelerator (Intel IAA).

This change reuses and adapts the functionality in Ryan Roberts' RFC
patch [1]:

  "[RFC,v1] mm: zswap: Store large folios without splitting"

  [1] https://lore.kernel.org/linux-mm/20231019110543.3284654-1-ryan.roberts@arm.com/T/#u

Link: https://lkml.kernel.org/r/20241001053222.6944-1-kanchana.p.sridhar@intel.com
Link: https://lkml.kernel.org/r/20241001053222.6944-7-kanchana.p.sridhar@intel.com
Signed-off-by: Kanchana P Sridhar <kanchana.p.sridhar@intel.com>
Originally-by: Ryan Roberts <ryan.roberts@arm.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Yosry Ahmed <yosryahmed@google.com>
Reviewed-by: Nhat Pham <nphamcs@gmail.com>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Usama Arif <usamaarif642@gmail.com>
Cc: Wajdi Feghali <wajdi.k.feghali@intel.com>
Cc: "Zou, Nanhai" <nanhai.zou@intel.com>
Cc: Barry Song <21cnbao@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

1 files changed, 121 insertions, 68 deletions

diff --git a/mm/zswap.c b/mm/zswap.c
index 1692273ff08c..d6b1e81860b9 100644
--- a/mm/zswap.c
+++ b/mm/zswap.c
@@ -410,6 +410,12 @@ static int __must_check zswap_pool_tryget(struct zswap_pool *pool)
 	return percpu_ref_tryget(&pool->ref);
 }
 
+/* The caller must already have a reference. */
+static void zswap_pool_get(struct zswap_pool *pool)
+{
+	percpu_ref_get(&pool->ref);
+}
+
 static void zswap_pool_put(struct zswap_pool *pool)
 {
 	percpu_ref_put(&pool->ref);
@@ -1403,68 +1409,38 @@ resched:
 /*********************************
 * main API
 **********************************/
-bool zswap_store(struct folio *folio)
+
+static ssize_t zswap_store_page(struct page *page,
+				struct obj_cgroup *objcg,
+				struct zswap_pool *pool)
 {
-	swp_entry_t swp = folio->swap;
-	pgoff_t offset = swp_offset(swp);
-	struct xarray *tree = swap_zswap_tree(swp);
 	struct zswap_entry *entry, *old;
-	struct obj_cgroup *objcg = NULL;
-	struct mem_cgroup *memcg = NULL;
-
-	VM_WARN_ON_ONCE(!folio_test_locked(folio));
-	VM_WARN_ON_ONCE(!folio_test_swapcache(folio));
-
-	/* Large folios aren't supported */
-	if (folio_test_large(folio))
-		return false;
-
-	if (!zswap_enabled)
-		goto check_old;
-
-	/* Check cgroup limits */
-	objcg = get_obj_cgroup_from_folio(folio);
-	if (objcg && !obj_cgroup_may_zswap(objcg)) {
-		memcg = get_mem_cgroup_from_objcg(objcg);
-		if (shrink_memcg(memcg)) {
-			mem_cgroup_put(memcg);
-			goto reject;
-		}
-		mem_cgroup_put(memcg);
-	}
-
-	if (zswap_check_limits())
-		goto reject;
 
 	/* allocate entry */
-	entry = zswap_entry_cache_alloc(GFP_KERNEL, folio_nid(folio));
+	entry = zswap_entry_cache_alloc(GFP_KERNEL, page_to_nid(page));
 	if (!entry) {
 		zswap_reject_kmemcache_fail++;
 		goto reject;
 	}
 
-	/* if entry is successfully added, it keeps the reference */
-	entry->pool = zswap_pool_current_get();
-	if (!entry->pool)
-		goto freepage;
+	/* zswap_store() already holds a ref on 'objcg' and 'pool' */
+	if (objcg)
+		obj_cgroup_get(objcg);
+	zswap_pool_get(pool);
 
-	if (objcg) {
-		memcg = get_mem_cgroup_from_objcg(objcg);
-		if (memcg_list_lru_alloc(memcg, &zswap_list_lru, GFP_KERNEL)) {
-			mem_cgroup_put(memcg);
-			goto put_pool;
-		}
-		mem_cgroup_put(memcg);
-	}
+	/* if entry is successfully added, it keeps the reference */
+	entry->pool = pool;
 
-	if (!zswap_compress(&folio->page, entry))
-		goto put_pool;
+	if (!zswap_compress(page, entry))
+		goto put_pool_objcg;
 
-	entry->swpentry = swp;
+	entry->swpentry = page_swap_entry(page);
 	entry->objcg = objcg;
 	entry->referenced = true;
 
-	old = xa_store(tree, offset, entry, GFP_KERNEL);
+	old = xa_store(swap_zswap_tree(entry->swpentry),
+		       swp_offset(entry->swpentry),
+		       entry, GFP_KERNEL);
 	if (xa_is_err(old)) {
 		int err = xa_err(old);
 
@@ -1481,11 +1457,6 @@ bool zswap_store(struct folio *folio)
 	if (old)
 		zswap_entry_free(old);
 
-	if (objcg) {
-		obj_cgroup_charge_zswap(objcg, entry->length);
-		count_objcg_events(objcg, ZSWPOUT, 1);
-	}
-
 	/*
 	 * We finish initializing the entry while it's already in xarray.
 	 * This is safe because:
@@ -1501,32 +1472,114 @@ bool zswap_store(struct folio *folio)
 		zswap_lru_add(&zswap_list_lru, entry);
 	}
 
-	/* update stats */
-	atomic_long_inc(&zswap_stored_pages);
-	count_vm_event(ZSWPOUT);
-
-	return true;
+	/*
+	 * We shouldn't have any possibility of failure after the entry is
+	 * added in the xarray. The pool/objcg refs obtained here will only
+	 * be dropped if/when zswap_entry_free() gets called.
+	 */
+	return entry->length;
 
 store_failed:
 	zpool_free(entry->pool->zpool, entry->handle);
-put_pool:
-	zswap_pool_put(entry->pool);
-freepage:
+put_pool_objcg:
+	zswap_pool_put(pool);
+	obj_cgroup_put(objcg);
 	zswap_entry_cache_free(entry);
 reject:
+	return -EINVAL;
+}
+
+bool zswap_store(struct folio *folio)
+{
+	long nr_pages = folio_nr_pages(folio);
+	swp_entry_t swp = folio->swap;
+	struct obj_cgroup *objcg = NULL;
+	struct mem_cgroup *memcg = NULL;
+	struct zswap_pool *pool;
+	size_t compressed_bytes = 0;
+	bool ret = false;
+	long index;
+
+	VM_WARN_ON_ONCE(!folio_test_locked(folio));
+	VM_WARN_ON_ONCE(!folio_test_swapcache(folio));
+
+	if (!zswap_enabled)
+		goto check_old;
+
+	objcg = get_obj_cgroup_from_folio(folio);
+	if (objcg && !obj_cgroup_may_zswap(objcg)) {
+		memcg = get_mem_cgroup_from_objcg(objcg);
+		if (shrink_memcg(memcg)) {
+			mem_cgroup_put(memcg);
+			goto put_objcg;
+		}
+		mem_cgroup_put(memcg);
+	}
+
+	if (zswap_check_limits())
+		goto put_objcg;
+
+	pool = zswap_pool_current_get();
+	if (!pool)
+		goto put_objcg;
+
+	if (objcg) {
+		memcg = get_mem_cgroup_from_objcg(objcg);
+		if (memcg_list_lru_alloc(memcg, &zswap_list_lru, GFP_KERNEL)) {
+			mem_cgroup_put(memcg);
+			goto put_pool;
+		}
+		mem_cgroup_put(memcg);
+	}
+
+	for (index = 0; index < nr_pages; ++index) {
+		struct page *page = folio_page(folio, index);
+		ssize_t bytes;
+
+		bytes = zswap_store_page(page, objcg, pool);
+		if (bytes < 0)
+			goto put_pool;
+		compressed_bytes += bytes;
+	}
+
+	if (objcg) {
+		obj_cgroup_charge_zswap(objcg, compressed_bytes);
+		count_objcg_events(objcg, ZSWPOUT, nr_pages);
+	}
+
+	atomic_long_add(nr_pages, &zswap_stored_pages);
+	count_vm_events(ZSWPOUT, nr_pages);
+
+	ret = true;
+
+put_pool:
+	zswap_pool_put(pool);
+put_objcg:
 	obj_cgroup_put(objcg);
-	if (zswap_pool_reached_full)
+	if (!ret && zswap_pool_reached_full)
 		queue_work(shrink_wq, &zswap_shrink_work);
 check_old:
 	/*
-	 * If the zswap store fails or zswap is disabled, we must invalidate the
-	 * possibly stale entry which was previously stored at this offset.
-	 * Otherwise, writeback could overwrite the new data in the swapfile.
+	 * If the zswap store fails or zswap is disabled, we must invalidate
+	 * the possibly stale entries which were previously stored at the
+	 * offsets corresponding to each page of the folio. Otherwise,
+	 * writeback could overwrite the new data in the swapfile.
 	 */
-	entry = xa_erase(tree, offset);
-	if (entry)
-		zswap_entry_free(entry);
-	return false;
+	if (!ret) {
+		unsigned type = swp_type(swp);
+		pgoff_t offset = swp_offset(swp);
+		struct zswap_entry *entry;
+		struct xarray *tree;
+
+		for (index = 0; index < nr_pages; ++index) {
+			tree = swap_zswap_tree(swp_entry(type, offset + index));
+			entry = xa_erase(tree, offset + index);
+			if (entry)
+				zswap_entry_free(entry);
+		}
+	}
+
+	return ret;
 }
 
 bool zswap_load(struct folio *folio)