Merge tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core:

   - support "prefer busy polling" NAPI operation mode, where we defer
     softirq for some time expecting applications to periodically busy
     poll

   - AF_XDP: improve efficiency by more batching and hindering the
     adjacency cache prefetcher

   - af_packet: make packet_fanout.arr size configurable up to 64K

   - tcp: optimize TCP zero copy receive in presence of partial or
     unaligned reads making zero copy a performance win for much smaller
     messages

   - XDP: add bulk APIs for returning / freeing frames

   - sched: support fragmenting IP packets as they come out of conntrack

   - net: allow virtual netdevs to forward UDP L4 and fraglist GSO skbs

  BPF:

   - BPF switch from crude rlimit-based to memcg-based memory accounting

   - BPF type format information for kernel modules and related tracing
     enhancements

   - BPF implement task local storage for BPF LSM

   - allow the FENTRY/FEXIT/RAW_TP tracing programs to use
     bpf_sk_storage

  Protocols:

   - mptcp: improve multiple xmit streams support, memory accounting and
     many smaller improvements

   - TLS: support CHACHA20-POLY1305 cipher

   - seg6: add support for SRv6 End.DT4/DT6 behavior

   - sctp: Implement RFC 6951: UDP Encapsulation of SCTP

   - ppp_generic: add ability to bridge channels directly

   - bridge: Connectivity Fault Management (CFM) support as is defined
     in IEEE 802.1Q section 12.14.

  Drivers:

   - mlx5: make use of the new auxiliary bus to organize the driver
     internals

   - mlx5: more accurate port TX timestamping support

   - mlxsw:
      - improve the efficiency of offloaded next hop updates by using
        the new nexthop object API
      - support blackhole nexthops
      - support IEEE 802.1ad (Q-in-Q) bridging

   - rtw88: major bluetooth co-existance improvements

   - iwlwifi: support new 6 GHz frequency band

   - ath11k: Fast Initial Link Setup (FILS)

   - mt7915: dual band concurrent (DBDC) support

   - net: ipa: add basic support for IPA v4.5

  Refactor:

   - a few pieces of in_interrupt() cleanup work from Sebastian Andrzej
     Siewior

   - phy: add support for shared interrupts; get rid of multiple driver
     APIs and have the drivers write a full IRQ handler, slight growth
     of driver code should be compensated by the simpler API which also
     allows shared IRQs

   - add common code for handling netdev per-cpu counters

   - move TX packet re-allocation from Ethernet switch tag drivers to a
     central place

   - improve efficiency and rename nla_strlcpy

   - number of W=1 warning cleanups as we now catch those in a patchwork
     build bot

  Old code removal:

   - wan: delete the DLCI / SDLA drivers

   - wimax: move to staging

   - wifi: remove old WDS wifi bridging support"

* tag 'net-next-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1922 commits)
  net: hns3: fix expression that is currently always true
  net: fix proc_fs init handling in af_packet and tls
  nfc: pn533: convert comma to semicolon
  af_vsock: Assign the vsock transport considering the vsock address flags
  af_vsock: Set VMADDR_FLAG_TO_HOST flag on the receive path
  vsock_addr: Check for supported flag values
  vm_sockets: Add VMADDR_FLAG_TO_HOST vsock flag
  vm_sockets: Add flags field in the vsock address data structure
  net: Disable NETIF_F_HW_TLS_TX when HW_CSUM is disabled
  tcp: Add logic to check for SYN w/ data in tcp_simple_retransmit
  net: mscc: ocelot: install MAC addresses in .ndo_set_rx_mode from process context
  nfc: s3fwrn5: Release the nfc firmware
  net: vxget: clean up sparse warnings
  mlxsw: spectrum_router: Use eXtended mezzanine to offload IPv4 router
  mlxsw: spectrum: Set KVH XLT cache mode for Spectrum2/3
  mlxsw: spectrum_router_xm: Introduce basic XM cache flushing
  mlxsw: reg: Add Router LPM Cache Enable Register
  mlxsw: reg: Add Router LPM Cache ML Delete Register
  mlxsw: spectrum_router_xm: Implement L-value tracking for M-index
  mlxsw: reg: Add XM Router M Table Register
  ...

1 files changed, 54 insertions, 24 deletions

diff --git a/security/integrity/ima/ima_main.c b/security/integrity/ima/ima_main.c
index 2d1af8899cab..cb2deaa188e7 100644
--- a/security/integrity/ima/ima_main.c
+++ b/security/integrity/ima/ima_main.c
@@ -501,37 +501,14 @@ int ima_file_check(struct file *file, int mask)
 }
 EXPORT_SYMBOL_GPL(ima_file_check);
 
-/**
- * ima_file_hash - return the stored measurement if a file has been hashed and
- * is in the iint cache.
- * @file: pointer to the file
- * @buf: buffer in which to store the hash
- * @buf_size: length of the buffer
- *
- * On success, return the hash algorithm (as defined in the enum hash_algo).
- * If buf is not NULL, this function also outputs the hash into buf.
- * If the hash is larger than buf_size, then only buf_size bytes will be copied.
- * It generally just makes sense to pass a buffer capable of holding the largest
- * possible hash: IMA_MAX_DIGEST_SIZE.
- * The file hash returned is based on the entire file, including the appended
- * signature.
- *
- * If IMA is disabled or if no measurement is available, return -EOPNOTSUPP.
- * If the parameters are incorrect, return -EINVAL.
- */
-int ima_file_hash(struct file *file, char *buf, size_t buf_size)
+static int __ima_inode_hash(struct inode *inode, char *buf, size_t buf_size)
 {
-	struct inode *inode;
 	struct integrity_iint_cache *iint;
 	int hash_algo;
 
-	if (!file)
-		return -EINVAL;
-
 	if (!ima_policy_flag)
 		return -EOPNOTSUPP;
 
-	inode = file_inode(file);
 	iint = integrity_iint_find(inode);
 	if (!iint)
 		return -EOPNOTSUPP;
@@ -558,9 +535,62 @@ int ima_file_hash(struct file *file, char *buf, size_t buf_size)
 
 	return hash_algo;
 }
+
+/**
+ * ima_file_hash - return the stored measurement if a file has been hashed and
+ * is in the iint cache.
+ * @file: pointer to the file
+ * @buf: buffer in which to store the hash
+ * @buf_size: length of the buffer
+ *
+ * On success, return the hash algorithm (as defined in the enum hash_algo).
+ * If buf is not NULL, this function also outputs the hash into buf.
+ * If the hash is larger than buf_size, then only buf_size bytes will be copied.
+ * It generally just makes sense to pass a buffer capable of holding the largest
+ * possible hash: IMA_MAX_DIGEST_SIZE.
+ * The file hash returned is based on the entire file, including the appended
+ * signature.
+ *
+ * If IMA is disabled or if no measurement is available, return -EOPNOTSUPP.
+ * If the parameters are incorrect, return -EINVAL.
+ */
+int ima_file_hash(struct file *file, char *buf, size_t buf_size)
+{
+	if (!file)
+		return -EINVAL;
+
+	return __ima_inode_hash(file_inode(file), buf, buf_size);
+}
 EXPORT_SYMBOL_GPL(ima_file_hash);
 
 /**
+ * ima_inode_hash - return the stored measurement if the inode has been hashed
+ * and is in the iint cache.
+ * @inode: pointer to the inode
+ * @buf: buffer in which to store the hash
+ * @buf_size: length of the buffer
+ *
+ * On success, return the hash algorithm (as defined in the enum hash_algo).
+ * If buf is not NULL, this function also outputs the hash into buf.
+ * If the hash is larger than buf_size, then only buf_size bytes will be copied.
+ * It generally just makes sense to pass a buffer capable of holding the largest
+ * possible hash: IMA_MAX_DIGEST_SIZE.
+ * The hash returned is based on the entire contents, including the appended
+ * signature.
+ *
+ * If IMA is disabled or if no measurement is available, return -EOPNOTSUPP.
+ * If the parameters are incorrect, return -EINVAL.
+ */
+int ima_inode_hash(struct inode *inode, char *buf, size_t buf_size)
+{
+	if (!inode)
+		return -EINVAL;
+
+	return __ima_inode_hash(inode, buf, buf_size);
+}
+EXPORT_SYMBOL_GPL(ima_inode_hash);
+
+/**
  * ima_post_create_tmpfile - mark newly created tmpfile as new
  * @file : newly created tmpfile
  *