diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2015-06-25 17:15:18 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2015-06-25 17:15:18 -0700 |
commit | 4570a37169d4b44d316f40b2ccc681dc93fedc7b (patch) | |
tree | cafffb586c60dddfb04b8619fa1ae0e859600de7 /sound/soc/atmel/Kconfig | |
parent | f7b08217c755e88a29b5bd53b4a1d10cd8b3c5f8 (diff) | |
parent | 60b93030b44a8c2cd015cebe5624fd7552ec67ec (diff) |
Merge tag 'sound-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"It was a busy development cycle at this time, as you can see a wide
range of changes in diffstat. There are no big changes but many
refactoring and improvements. Here we go some highlights:
ALSA core:
- Procfs codes were cleaned up to use seq_file
- Procfs can be opt out via Kconfig (only for EXPERT)
- Two types of jack API were unified finally; now both kctl and input
jack devs are handled via a single function call.
HD-audio:
- Continued code restructuring for the future ASoC driver; now HDA
controller driver is split to a core helper module.
- Preliminary codes for Skylake audio support in HDA core.
- Proper i915 gfx power well management for SKL & co
- Enabled runtime PM as default for Intel HDMI/DP codecs
- Newer Tegra chip supports
- More quirks for Dell headsets, Alienware (with CA0132), etc.
- A couple of DRM ELD helper API functions
ASoC:
- Support for loading ASoC topology maps from firmware, intended to
be used to allow self-describing DSP firmware images to be built
which can map controls added by the DSP to userspace without the
kernel needing to know about individual DSP firmwares
- Lots of refactoring to avoid direct access to snd_soc_codec where
it's not needed supporting future refactoring
- Big refactoring, cleanup and enhancement for the Wolfson ADSP
driver
- Cleanup series for TI TAS2552 and R-CAR drivers
- Fixes and improvements on RT56xx codecs
- Support for TI TAS571x power amplifiers
- Support for Qualcomm APQ8016 and ZTE ZX296702 SoCs
- Support for x86 systems with RT5650 and Qualcomm Storm
- Support for Mediatek AFE (Audio Front End) unit
- Other various small fixes to ASoC codec drivers
Firewire:
- Enhanced to allow non-blocking streams to use timestamp
synchronization
- Improve support for DM1500 and BeBoBv3
Misc:
- Cleanup of old pci API functions over all PCI sound drivers
- Fix long-standing regression of the old powermac i2c setup"
* tag 'sound-4.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (533 commits)
ALSA: pcm: Fix pcm_class sysfs output
ALSA: hda-beep: Update authors dead email address
ASoC: wm_adsp: Move DSP Rate controls into the codec
ASoC: wm8995: Fix setting sysclk for WM8995_SYSCLK_MCLK2 case
ALSA: hda: provide default bus io ops extended hdac
ALSA: hda: add hda link cleanup routine
ALSA: hda: add hdac_ext stream creation and cleanup routines
ASoC: rsrc-card: remove unused ret
ALSA: HDAC: move SND_HDA_PREALLOC_SIZE to core
ASoC: mediatek: Add machine driver for rt5650 rt5676 codec
ASoC: mediatek: Add machine driver for MAX98090 codec
ASoC: mediatek: Add AFE platform driver
ASoC: rsnd: remove io from rsnd_mod
ASoC: rsnd: move rsnd_mod_is_working() to rsnd_io_is_working()
ASoC: rsnd: don't use rsnd_mod_to_io() on snd_kcontrol
ASoC: rsnd: don't use rsnd_mod_to_io() on rsnd_src_xxx()
ASoC: rsnd: don't use rsnd_mod_to_io() on rsnd_ssi_xxx()
ASoC: rsnd: don't use rsnd_mod_to_io() on rsnd_dma_xxx()
ASoC: rsnd: don't use rsnd_mod_to_io() on rsnd_get_adinr()
ASoC: rsnd: add common interrupt handler for SSI/SRC/DMA
...
Diffstat (limited to 'sound/soc/atmel/Kconfig')
-rw-r--r-- | sound/soc/atmel/Kconfig | 37 |
1 files changed, 21 insertions, 16 deletions
diff --git a/sound/soc/atmel/Kconfig b/sound/soc/atmel/Kconfig index e7d08806f3e9..1489cd461aec 100644 --- a/sound/soc/atmel/Kconfig +++ b/sound/soc/atmel/Kconfig @@ -6,29 +6,35 @@ config SND_ATMEL_SOC the ATMEL SSC interface. You will also need to select the audio interfaces to support below. +if SND_ATMEL_SOC + config SND_ATMEL_SOC_PDC tristate - depends on SND_ATMEL_SOC + default m if SND_ATMEL_SOC_SSC_PDC=m && SND_ATMEL_SOC_SSC=m + default y if SND_ATMEL_SOC_SSC_PDC=y || (SND_ATMEL_SOC_SSC_PDC=m && SND_ATMEL_SOC_SSC=y) + +config SND_ATMEL_SOC_SSC_PDC + tristate config SND_ATMEL_SOC_DMA tristate - depends on SND_ATMEL_SOC select SND_SOC_GENERIC_DMAENGINE_PCM + default m if SND_ATMEL_SOC_SSC_DMA=m && SND_ATMEL_SOC_SSC=m + default y if SND_ATMEL_SOC_SSC_DMA=y || (SND_ATMEL_SOC_SSC_DMA=m && SND_ATMEL_SOC_SSC=y) + +config SND_ATMEL_SOC_SSC_DMA + tristate config SND_ATMEL_SOC_SSC tristate - depends on SND_ATMEL_SOC - help - Say Y or M if you want to add support for codecs the - ATMEL SSC interface. You will also needs to select the individual - machine drivers to support below. + default y if SND_ATMEL_SOC_SSC_DMA=y || SND_ATMEL_SOC_SSC_PDC=y + default m if SND_ATMEL_SOC_SSC_DMA=m || SND_ATMEL_SOC_SSC_PDC=m config SND_AT91_SOC_SAM9G20_WM8731 tristate "SoC Audio support for WM8731-based At91sam9g20 evaluation board" depends on ARCH_AT91 || COMPILE_TEST - depends on ATMEL_SSC && SND_ATMEL_SOC && SND_SOC_I2C_AND_SPI - select SND_ATMEL_SOC_PDC - select SND_ATMEL_SOC_SSC + depends on ATMEL_SSC && SND_SOC_I2C_AND_SPI + select SND_ATMEL_SOC_SSC_PDC select SND_SOC_WM8731 help Say Y if you want to add support for SoC audio on WM8731-based @@ -37,9 +43,8 @@ config SND_AT91_SOC_SAM9G20_WM8731 config SND_ATMEL_SOC_WM8904 tristate "Atmel ASoC driver for boards using WM8904 codec" depends on ARCH_AT91 || COMPILE_TEST - depends on ATMEL_SSC && SND_ATMEL_SOC && I2C - select SND_ATMEL_SOC_SSC - select SND_ATMEL_SOC_DMA + depends on ATMEL_SSC && I2C + select SND_ATMEL_SOC_SSC_DMA select SND_SOC_WM8904 help Say Y if you want to add support for Atmel ASoC driver for boards using @@ -48,10 +53,10 @@ config SND_ATMEL_SOC_WM8904 config SND_AT91_SOC_SAM9X5_WM8731 tristate "SoC Audio support for WM8731-based at91sam9x5 board" depends on ARCH_AT91 || COMPILE_TEST - depends on ATMEL_SSC && SND_ATMEL_SOC && SND_SOC_I2C_AND_SPI - select SND_ATMEL_SOC_SSC - select SND_ATMEL_SOC_DMA + depends on ATMEL_SSC && SND_SOC_I2C_AND_SPI + select SND_ATMEL_SOC_SSC_DMA select SND_SOC_WM8731 help Say Y if you want to add support for audio SoC on an at91sam9x5 based board that is using WM8731 codec. +endif |