Merge series "Support ROHM BD9576MUF and BD9573MUF PMICs" from Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>:

Initial support for ROHM BD9576MUF and BD9573MUF PMICs.

These PMICs are primarily intended to be used to power the R-Car family
processors. BD9576MUF includes some additional safety features the
BD9573MUF does not have. This initial version of drivers does not
utilize these features and for now the SW behaviour is identical.

Please note that this version of drivers is only tested on BD9576MUF
but according to the data-sheets the relevant parts of registers should
be same so drivers should also work on BD9573MUF.

This patch series includes MFD, watchdog and regulator drivers with
basic functionality such as:

- Enabling and pinging the watchdog
- configuring watchog timeout / window from device-tree
- reading regulator states/voltages
- enabling/disabling VOUT1 (VD50) when control mode B is used.

This patch series does not bring interrupt support. BD9576MUF and BD9573MUF
are designed to keep the IRQ line low for whole duration of error
condition. IRQ can't be 'acked'. So proper IRQ support would require
some IRQ limiter implementation (delayed unmask?) in order to not hog
the CPU.

---

Matti Vaittinen (6):
  dt_bindings: mfd: Add ROHM BD9576MUF and BD9573MUF PMICs
  dt_bindings: regulator: Add ROHM BD9576MUF and BD9573MUF PMICs
  mfd: Support ROHM BD9576MUF and BD9573MUF
  wdt: Support wdt on ROHM BD9576MUF and BD9573MUF
  regulator: Support ROHM BD9576MUF and BD9573MUF
  MAINTAINERS: Add ROHM BD9576MUF and BD9573MUF drivers

 .../bindings/mfd/rohm,bd9576-pmic.yaml        | 129 +++++++
 .../regulator/rohm,bd9576-regulator.yaml      |  33 ++
 MAINTAINERS                                   |   4 +
 drivers/mfd/Kconfig                           |  11 +
 drivers/mfd/Makefile                          |   1 +
 drivers/mfd/rohm-bd9576.c                     | 130 +++++++
 drivers/regulator/Kconfig                     |  10 +
 drivers/regulator/Makefile                    |   1 +
 drivers/regulator/bd9576-regulator.c          | 337 ++++++++++++++++++
 drivers/watchdog/Kconfig                      |  13 +
 drivers/watchdog/Makefile                     |   1 +
 drivers/watchdog/bd9576_wdt.c                 | 295 +++++++++++++++
 include/linux/mfd/rohm-bd957x.h               |  61 ++++
 include/linux/mfd/rohm-generic.h              |   2 +
 14 files changed, 1028 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/rohm,bd9576-pmic.yaml
 create mode 100644 Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml
 create mode 100644 drivers/mfd/rohm-bd9576.c
 create mode 100644 drivers/regulator/bd9576-regulator.c
 create mode 100644 drivers/watchdog/bd9576_wdt.c
 create mode 100644 include/linux/mfd/rohm-bd957x.h

base-commit: f4d51dffc6c01a9e94650d95ce0104964f8ae822
--
2.21.0

--
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND

~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
Simon says - in Latin please.
~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~
Thanks to Simon Glass for the translation =]

7 files changed, 109 insertions, 34 deletions

diff --git a/tools/testing/selftests/bpf/test_maps.c b/tools/testing/selftests/bpf/test_maps.c
index 754cf611723e..0d92ebcb335d 100644
--- a/tools/testing/selftests/bpf/test_maps.c
+++ b/tools/testing/selftests/bpf/test_maps.c
@@ -1274,6 +1274,8 @@ static void __run_parallel(unsigned int tasks,
 	pid_t pid[tasks];
 	int i;
 
+	fflush(stdout);
+
 	for (i = 0; i < tasks; i++) {
 		pid[i] = fork();
 		if (pid[i] == 0) {
diff --git a/tools/testing/selftests/bpf/test_progs.c b/tools/testing/selftests/bpf/test_progs.c
index b1e4dadacd9b..22943b58d752 100644
--- a/tools/testing/selftests/bpf/test_progs.c
+++ b/tools/testing/selftests/bpf/test_progs.c
@@ -618,7 +618,9 @@ int cd_flavor_subdir(const char *exec_name)
 	if (!flavor)
 		return 0;
 	flavor++;
-	fprintf(stdout, "Switching to flavor '%s' subdirectory...\n", flavor);
+	if (env.verbosity > VERBOSE_NONE)
+		fprintf(stdout,	"Switching to flavor '%s' subdirectory...\n", flavor);
+
 	return chdir(flavor);
 }
 
diff --git a/tools/testing/selftests/netfilter/nft_flowtable.sh b/tools/testing/selftests/netfilter/nft_flowtable.sh
index a47d1d832210..431296c0f91c 100755
--- a/tools/testing/selftests/netfilter/nft_flowtable.sh
+++ b/tools/testing/selftests/netfilter/nft_flowtable.sh
@@ -11,7 +11,7 @@
 # result in fragmentation and/or PMTU discovery.
 #
 # You can check with different Orgininator/Link/Responder MTU eg:
-# sh nft_flowtable.sh -o1000 -l500 -r100
+# nft_flowtable.sh -o8000 -l1500 -r2000
 #
 
 
@@ -27,8 +27,7 @@ ns2out=""
 log_netns=$(sysctl -n net.netfilter.nf_log_all_netns)
 
 checktool (){
-	$1 > /dev/null 2>&1
-	if [ $? -ne 0 ];then
+	if ! $1 > /dev/null 2>&1; then
 		echo "SKIP: Could not $2"
 		exit $ksft_skip
 	fi
@@ -87,19 +86,36 @@ omtu=9000
 lmtu=1500
 rmtu=2000
 
+usage(){
+	echo "nft_flowtable.sh [OPTIONS]"
+	echo
+	echo "MTU options"
+	echo "   -o originator"
+	echo "   -l link"
+	echo "   -r responder"
+	exit 1
+}
+
 while getopts "o:l:r:" o
 do
 	case $o in
 		o) omtu=$OPTARG;;
 		l) lmtu=$OPTARG;;
 		r) rmtu=$OPTARG;;
+		*) usage;;
 	esac
 done
 
-ip -net nsr1 link set veth0 mtu $omtu
+if ! ip -net nsr1 link set veth0 mtu $omtu; then
+	exit 1
+fi
+
 ip -net ns1 link set eth0 mtu $omtu
 
-ip -net nsr2 link set veth1 mtu $rmtu
+if ! ip -net nsr2 link set veth1 mtu $rmtu; then
+	exit 1
+fi
+
 ip -net ns2 link set eth0 mtu $rmtu
 
 # transfer-net between nsr1 and nsr2.
@@ -120,7 +136,10 @@ for i in 1 2; do
   ip -net ns$i route add default via 10.0.$i.1
   ip -net ns$i addr add dead:$i::99/64 dev eth0
   ip -net ns$i route add default via dead:$i::1
-  ip netns exec ns$i sysctl net.ipv4.tcp_no_metrics_save=1 > /dev/null
+  if ! ip netns exec ns$i sysctl net.ipv4.tcp_no_metrics_save=1 > /dev/null; then
+	echo "ERROR: Check Originator/Responder values (problem during address addition)"
+	exit 1
+  fi
 
   # don't set ip DF bit for first two tests
   ip netns exec ns$i sysctl net.ipv4.ip_no_pmtu_disc=1 > /dev/null
@@ -178,15 +197,13 @@ if [ $? -ne 0 ]; then
 fi
 
 # test basic connectivity
-ip netns exec ns1 ping -c 1 -q 10.0.2.99 > /dev/null
-if [ $? -ne 0 ];then
+if ! ip netns exec ns1 ping -c 1 -q 10.0.2.99 > /dev/null; then
   echo "ERROR: ns1 cannot reach ns2" 1>&2
   bash
   exit 1
 fi
 
-ip netns exec ns2 ping -c 1 -q 10.0.1.99 > /dev/null
-if [ $? -ne 0 ];then
+if ! ip netns exec ns2 ping -c 1 -q 10.0.1.99 > /dev/null; then
   echo "ERROR: ns2 cannot reach ns1" 1>&2
   exit 1
 fi
@@ -203,7 +220,6 @@ ns2out=$(mktemp)
 make_file()
 {
 	name=$1
-	who=$2
 
 	SIZE=$((RANDOM % (1024 * 8)))
 	TSIZE=$((SIZE * 1024))
@@ -222,8 +238,7 @@ check_transfer()
 	out=$2
 	what=$3
 
-	cmp "$in" "$out" > /dev/null 2>&1
-	if [ $? -ne 0 ] ;then
+	if ! cmp "$in" "$out" > /dev/null 2>&1; then
 		echo "FAIL: file mismatch for $what" 1>&2
 		ls -l "$in"
 		ls -l "$out"
@@ -260,13 +275,11 @@ test_tcp_forwarding_ip()
 
 	wait
 
-	check_transfer "$ns1in" "$ns2out" "ns1 -> ns2"
-	if [ $? -ne 0 ];then
+	if ! check_transfer "$ns1in" "$ns2out" "ns1 -> ns2"; then
 		lret=1
 	fi
 
-	check_transfer "$ns2in" "$ns1out" "ns1 <- ns2"
-	if [ $? -ne 0 ];then
+	if ! check_transfer "$ns2in" "$ns1out" "ns1 <- ns2"; then
 		lret=1
 	fi
 
@@ -295,13 +308,12 @@ test_tcp_forwarding_nat()
 	return $lret
 }
 
-make_file "$ns1in" "ns1"
-make_file "$ns2in" "ns2"
+make_file "$ns1in"
+make_file "$ns2in"
 
 # First test:
 # No PMTU discovery, nsr1 is expected to fragment packets from ns1 to ns2 as needed.
-test_tcp_forwarding ns1 ns2
-if [ $? -eq 0 ] ;then
+if test_tcp_forwarding ns1 ns2; then
 	echo "PASS: flow offloaded for ns1/ns2"
 else
 	echo "FAIL: flow offload for ns1/ns2:" 1>&2
@@ -332,9 +344,7 @@ table ip nat {
 }
 EOF
 
-test_tcp_forwarding_nat ns1 ns2
-
-if [ $? -eq 0 ] ;then
+if test_tcp_forwarding_nat ns1 ns2; then
 	echo "PASS: flow offloaded for ns1/ns2 with NAT"
 else
 	echo "FAIL: flow offload for ns1/ns2 with NAT" 1>&2
@@ -346,8 +356,7 @@ fi
 # Same as second test, but with PMTU discovery enabled.
 handle=$(ip netns exec nsr1 nft -a list table inet filter | grep something-to-grep-for | cut -d \# -f 2)
 
-ip netns exec nsr1 nft delete rule inet filter forward $handle
-if [ $? -ne 0 ] ;then
+if ! ip netns exec nsr1 nft delete rule inet filter forward $handle; then
 	echo "FAIL: Could not delete large-packet accept rule"
 	exit 1
 fi
@@ -355,8 +364,7 @@ fi
 ip netns exec ns1 sysctl net.ipv4.ip_no_pmtu_disc=0 > /dev/null
 ip netns exec ns2 sysctl net.ipv4.ip_no_pmtu_disc=0 > /dev/null
 
-test_tcp_forwarding_nat ns1 ns2
-if [ $? -eq 0 ] ;then
+if test_tcp_forwarding_nat ns1 ns2; then
 	echo "PASS: flow offloaded for ns1/ns2 with NAT and pmtu discovery"
 else
 	echo "FAIL: flow offload for ns1/ns2 with NAT and pmtu discovery" 1>&2
@@ -402,8 +410,7 @@ ip -net ns2 route del 192.168.10.1 via 10.0.2.1
 ip -net ns2 route add default via 10.0.2.1
 ip -net ns2 route add default via dead:2::1
 
-test_tcp_forwarding ns1 ns2
-if [ $? -eq 0 ] ;then
+if test_tcp_forwarding ns1 ns2; then
 	echo "PASS: ipsec tunnel mode for ns1/ns2"
 else
 	echo "FAIL: ipsec tunnel mode for ns1/ns2"
diff --git a/tools/testing/selftests/powerpc/mm/.gitignore b/tools/testing/selftests/powerpc/mm/.gitignore
index 91c775c23c66..aac4a59f9e28 100644
--- a/tools/testing/selftests/powerpc/mm/.gitignore
+++ b/tools/testing/selftests/powerpc/mm/.gitignore
@@ -2,6 +2,7 @@
 hugetlb_vs_thp_test
 subpage_prot
 tempfile
+prot_sao
 segv_errors
 wild_bctr
 large_vm_fork_separation
diff --git a/tools/testing/selftests/powerpc/mm/Makefile b/tools/testing/selftests/powerpc/mm/Makefile
index 250ce172e0da..defe488d6bf1 100644
--- a/tools/testing/selftests/powerpc/mm/Makefile
+++ b/tools/testing/selftests/powerpc/mm/Makefile
@@ -2,7 +2,7 @@
 noarg:
 	$(MAKE) -C ../
 
-TEST_GEN_PROGS := hugetlb_vs_thp_test subpage_prot segv_errors wild_bctr \
+TEST_GEN_PROGS := hugetlb_vs_thp_test subpage_prot prot_sao segv_errors wild_bctr \
 		  large_vm_fork_separation bad_accesses pkey_exec_prot \
 		  pkey_siginfo stack_expansion_signal stack_expansion_ldst
 
@@ -14,6 +14,8 @@ include ../../lib.mk
 
 $(TEST_GEN_PROGS): ../harness.c ../utils.c
 
+$(OUTPUT)/prot_sao: ../utils.c
+
 $(OUTPUT)/wild_bctr: CFLAGS += -m64
 $(OUTPUT)/large_vm_fork_separation: CFLAGS += -m64
 $(OUTPUT)/bad_accesses: CFLAGS += -m64
diff --git a/tools/testing/selftests/powerpc/mm/prot_sao.c b/tools/testing/selftests/powerpc/mm/prot_sao.c
new file mode 100644
index 000000000000..e0cf8ebbf8cd
--- /dev/null
+++ b/tools/testing/selftests/powerpc/mm/prot_sao.c
@@ -0,0 +1,43 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright 2016, Michael Ellerman, IBM Corp.
+ */
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <sys/mman.h>
+
+#include <asm/cputable.h>
+
+#include "utils.h"
+
+#define SIZE (64 * 1024)
+
+int test_prot_sao(void)
+{
+	char *p;
+
+	/* SAO was introduced in 2.06 and removed in 3.1 */
+	SKIP_IF(!have_hwcap(PPC_FEATURE_ARCH_2_06) ||
+		have_hwcap2(PPC_FEATURE2_ARCH_3_1));
+
+	/*
+	 * Ensure we can ask for PROT_SAO.
+	 * We can't really verify that it does the right thing, but at least we
+	 * confirm the kernel will accept it.
+	 */
+	p = mmap(NULL, SIZE, PROT_READ | PROT_WRITE | PROT_SAO,
+		 MAP_ANONYMOUS | MAP_PRIVATE, -1, 0);
+	FAIL_IF(p == MAP_FAILED);
+
+	/* Write to the mapping, to at least cause a fault */
+	memset(p, 0xaa, SIZE);
+
+	return 0;
+}
+
+int main(void)
+{
+	return test_harness(test_prot_sao, "prot-sao");
+}
diff --git a/tools/testing/selftests/x86/test_vsyscall.c b/tools/testing/selftests/x86/test_vsyscall.c
index c41f24b517f4..65c141ebfbbd 100644
--- a/tools/testing/selftests/x86/test_vsyscall.c
+++ b/tools/testing/selftests/x86/test_vsyscall.c
@@ -462,6 +462,17 @@ static int test_vsys_x(void)
 	return 0;
 }
 
+/*
+ * Debuggers expect ptrace() to be able to peek at the vsyscall page.
+ * Use process_vm_readv() as a proxy for ptrace() to test this.  We
+ * want it to work in the vsyscall=emulate case and to fail in the
+ * vsyscall=xonly case.
+ *
+ * It's worth noting that this ABI is a bit nutty.  write(2) can't
+ * read from the vsyscall page on any kernel version or mode.  The
+ * fact that ptrace() ever worked was a nice courtesy of old kernels,
+ * but the code to support it is fairly gross.
+ */
 static int test_process_vm_readv(void)
 {
 #ifdef __x86_64__
@@ -477,8 +488,12 @@ static int test_process_vm_readv(void)
 	remote.iov_len = 4096;
 	ret = process_vm_readv(getpid(), &local, 1, &remote, 1, 0);
 	if (ret != 4096) {
-		printf("[OK]\tprocess_vm_readv() failed (ret = %d, errno = %d)\n", ret, errno);
-		return 0;
+		/*
+		 * We expect process_vm_readv() to work if and only if the
+		 * vsyscall page is readable.
+		 */
+		printf("[%s]\tprocess_vm_readv() failed (ret = %d, errno = %d)\n", vsyscall_map_r ? "FAIL" : "OK", ret, errno);
+		return vsyscall_map_r ? 1 : 0;
 	}
 
 	if (vsyscall_map_r) {
@@ -488,6 +503,9 @@ static int test_process_vm_readv(void)
 			printf("[FAIL]\tIt worked but returned incorrect data\n");
 			return 1;
 		}
+	} else {
+		printf("[FAIL]\tprocess_rm_readv() succeeded, but it should have failed in this configuration\n");
+		return 1;
 	}
 #endif