diff options
| -rw-r--r-- | Documentation/driver-api/libata.rst | 16 | ||||
| -rw-r--r-- | drivers/ata/libata-core.c | 138 | ||||
| -rw-r--r-- | drivers/ata/libata.h | 1 | ||||
| -rw-r--r-- | include/linux/libata.h | 1 |
4 files changed, 0 insertions, 156 deletions
diff --git a/Documentation/driver-api/libata.rst b/Documentation/driver-api/libata.rst index 311af516a3fd..eecb8b81e185 100644 --- a/Documentation/driver-api/libata.rst +++ b/Documentation/driver-api/libata.rst @@ -32,22 +32,6 @@ register blocks. :c:type:`struct ata_port_operations <ata_port_operations>` ---------------------------------------------------------- -Disable ATA port -~~~~~~~~~~~~~~~~ - -:: - - void (*port_disable) (struct ata_port *); - - -Called from :c:func:`ata_bus_probe` error path, as well as when unregistering -from the SCSI module (rmmod, hot unplug). This function should do -whatever needs to be done to take the port out of use. In most cases, -:c:func:`ata_port_disable` can be used as this hook. - -Called from :c:func:`ata_bus_probe` on a failed probe. Called from -:c:func:`ata_scsi_release`. - Post-IDENTIFY device configuration ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index fdd4804d0bf2..988d1fc451be 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -3058,144 +3058,6 @@ int ata_cable_sata(struct ata_port *ap) EXPORT_SYMBOL_GPL(ata_cable_sata); /** - * ata_bus_probe - Reset and probe ATA bus - * @ap: Bus to probe - * - * Master ATA bus probing function. Initiates a hardware-dependent - * bus reset, then attempts to identify any devices found on - * the bus. - * - * LOCKING: - * PCI/etc. bus probe sem. - * - * RETURNS: - * Zero on success, negative errno otherwise. - */ - -int ata_bus_probe(struct ata_port *ap) -{ - unsigned int classes[ATA_MAX_DEVICES]; - int tries[ATA_MAX_DEVICES]; - int rc; - struct ata_device *dev; - - ata_for_each_dev(dev, &ap->link, ALL) - tries[dev->devno] = ATA_PROBE_MAX_TRIES; - - retry: - ata_for_each_dev(dev, &ap->link, ALL) { - /* If we issue an SRST then an ATA drive (not ATAPI) - * may change configuration and be in PIO0 timing. If - * we do a hard reset (or are coming from power on) - * this is true for ATA or ATAPI. Until we've set a - * suitable controller mode we should not touch the - * bus as we may be talking too fast. - */ - dev->pio_mode = XFER_PIO_0; - dev->dma_mode = 0xff; - - /* If the controller has a pio mode setup function - * then use it to set the chipset to rights. Don't - * touch the DMA setup as that will be dealt with when - * configuring devices. - */ - if (ap->ops->set_piomode) - ap->ops->set_piomode(ap, dev); - } - - /* reset and determine device classes */ - ap->ops->phy_reset(ap); - - ata_for_each_dev(dev, &ap->link, ALL) { - if (dev->class != ATA_DEV_UNKNOWN) - classes[dev->devno] = dev->class; - else - classes[dev->devno] = ATA_DEV_NONE; - - dev->class = ATA_DEV_UNKNOWN; - } - - /* read IDENTIFY page and configure devices. We have to do the identify - specific sequence bass-ackwards so that PDIAG- is released by - the slave device */ - - ata_for_each_dev(dev, &ap->link, ALL_REVERSE) { - if (tries[dev->devno]) - dev->class = classes[dev->devno]; - - if (!ata_dev_enabled(dev)) - continue; - - rc = ata_dev_read_id(dev, &dev->class, ATA_READID_POSTRESET, - dev->id); - if (rc) - goto fail; - } - - /* Now ask for the cable type as PDIAG- should have been released */ - if (ap->ops->cable_detect) - ap->cbl = ap->ops->cable_detect(ap); - - /* We may have SATA bridge glue hiding here irrespective of - * the reported cable types and sensed types. When SATA - * drives indicate we have a bridge, we don't know which end - * of the link the bridge is which is a problem. - */ - ata_for_each_dev(dev, &ap->link, ENABLED) - if (ata_id_is_sata(dev->id)) - ap->cbl = ATA_CBL_SATA; - - /* After the identify sequence we can now set up the devices. We do - this in the normal order so that the user doesn't get confused */ - - ata_for_each_dev(dev, &ap->link, ENABLED) { - ap->link.eh_context.i.flags |= ATA_EHI_PRINTINFO; - rc = ata_dev_configure(dev); - ap->link.eh_context.i.flags &= ~ATA_EHI_PRINTINFO; - if (rc) - goto fail; - } - - /* configure transfer mode */ - rc = ata_set_mode(&ap->link, &dev); - if (rc) - goto fail; - - ata_for_each_dev(dev, &ap->link, ENABLED) - return 0; - - return -ENODEV; - - fail: - tries[dev->devno]--; - - switch (rc) { - case -EINVAL: - /* eeek, something went very wrong, give up */ - tries[dev->devno] = 0; - break; - - case -ENODEV: - /* give it just one more chance */ - tries[dev->devno] = min(tries[dev->devno], 1); - fallthrough; - case -EIO: - if (tries[dev->devno] == 1) { - /* This is the last chance, better to slow - * down than lose it. - */ - sata_down_spd_limit(&ap->link, 0); - ata_down_xfermask_limit(dev, ATA_DNXFER_PIO); - } - } - - if (!tries[dev->devno]) - ata_dev_disable(dev); - - goto retry; -} - -/** * sata_print_link_status - Print SATA link status * @link: SATA link to printk link status about * diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h index 1ec9b4427b84..6e7d352803bd 100644 --- a/drivers/ata/libata.h +++ b/drivers/ata/libata.h @@ -122,7 +122,6 @@ extern void ata_scsi_media_change_notify(struct ata_device *dev); extern void ata_scsi_hotplug(struct work_struct *work); extern void ata_schedule_scsi_eh(struct Scsi_Host *shost); extern void ata_scsi_dev_rescan(struct work_struct *work); -extern int ata_bus_probe(struct ata_port *ap); extern int ata_scsi_user_scan(struct Scsi_Host *shost, unsigned int channel, unsigned int id, u64 lun); void ata_scsi_sdev_config(struct scsi_device *sdev); diff --git a/include/linux/libata.h b/include/linux/libata.h index 0980992c54c2..e176d832467d 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -344,7 +344,6 @@ enum { ATA_LINK_RESUME_TRIES = 5, /* how hard are we gonna try to probe/recover devices */ - ATA_PROBE_MAX_TRIES = 3, ATA_EH_DEV_TRIES = 3, ATA_EH_PMP_TRIES = 5, ATA_EH_PMP_LINK_TRIES = 3, |