diff options
54 files changed, 9415 insertions, 742 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt new file mode 100644 index 000000000000..dff0e5f995e2 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/allwinner,sunxi-pinctrl.txt @@ -0,0 +1,60 @@ +* Allwinner A1X Pin Controller + +The pins controlled by sunXi pin controller are organized in banks, +each bank has 32 pins. Each pin has 7 multiplexing functions, with +the first two functions being GPIO in and out. The configuration on +the pins includes drive strength and pull-up. + +Required properties: +- compatible: "allwinner,<soc>-pinctrl". Supported SoCs for now are: + sun5i-a13. +- reg: Should contain the register physical address and length for the + pin controller. + +Please refer to pinctrl-bindings.txt in this directory for details of the +common pinctrl bindings used by client devices. + +A pinctrl node should contain at least one subnodes representing the +pinctrl groups available on the machine. Each subnode will list the +pins it needs, and how they should be configured, with regard to muxer +configuration, drive strength and pullups. If one of these options is +not set, its actual value will be unspecified. + +Required subnode-properties: + +- allwinner,pins: List of strings containing the pin name. +- allwinner,function: Function to mux the pins listed above to. + +Optional subnode-properties: +- allwinner,drive: Integer. Represents the current sent to the pin + 0: 10 mA + 1: 20 mA + 2: 30 mA + 3: 40 mA +- allwinner,pull: Integer. + 0: No resistor + 1: Pull-up resistor + 2: Pull-down resistor + +Examples: + +pinctrl@01c20800 { + compatible = "allwinner,sun5i-a13-pinctrl"; + reg = <0x01c20800 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + uart1_pins_a: uart1@0 { + allwinner,pins = "PE10", "PE11"; + allwinner,function = "uart1"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + uart1_pins_b: uart1@1 { + allwinner,pins = "PG3", "PG4"; + allwinner,function = "uart1"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; +}; diff --git a/Documentation/devicetree/bindings/pinctrl/nvidia,tegra114-pinmux.txt b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra114-pinmux.txt new file mode 100644 index 000000000000..e204d009f16c --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/nvidia,tegra114-pinmux.txt @@ -0,0 +1,120 @@ +NVIDIA Tegra114 pinmux controller + +The Tegra114 pinctrl binding is very similar to the Tegra20 and Tegra30 +pinctrl binding, as described in nvidia,tegra20-pinmux.txt and +nvidia,tegra30-pinmux.txt. In fact, this document assumes that binding as +a baseline, and only documents the differences between the two bindings. + +Required properties: +- compatible: "nvidia,tegra114-pinmux" +- reg: Should contain the register physical address and length for each of + the pad control and mux registers. The first bank of address must be the + driver strength pad control register address and second bank address must + be pinmux register address. + +Tegra114 adds the following optional properties for pin configuration subnodes: +- nvidia,enable-input: Integer. Enable the pin's input path. 0: no, 1: yes. +- nvidia,open-drain: Integer. Enable open drain mode. 0: no, 1: yes. +- nvidia,lock: Integer. Lock the pin configuration against further changes + until reset. 0: no, 1: yes. +- nvidia,io-reset: Integer. Reset the IO path. 0: no, 1: yes. +- nvidia,rcv-sel: Integer. Select VIL/VIH receivers. 0: normal, 1: high. +- nvidia,drive-type: Integer. Valid range 0...3. + +As with Tegra20 and Terga30, see the Tegra TRM for complete details regarding +which groups support which functionality. + +Valid values for pin and group names are: + + per-pin mux groups: + + These all support nvidia,function, nvidia,tristate, nvidia,pull, + nvidia,enable-input, nvidia,lock. Some support nvidia,open-drain, + nvidia,io-reset and nvidia,rcv-sel. + + ulpi_data0_po1, ulpi_data1_po2, ulpi_data2_po3, ulpi_data3_po4, + ulpi_data4_po5, ulpi_data5_po6, ulpi_data6_po7, ulpi_data7_po0, + ulpi_clk_py0, ulpi_dir_py1, ulpi_nxt_py2, ulpi_stp_py3, dap3_fs_pp0, + dap3_din_pp1, dap3_dout_pp2, dap3_sclk_pp3, pv0, pv1, sdmmc1_clk_pz0, + sdmmc1_cmd_pz1, sdmmc1_dat3_py4, sdmmc1_dat2_py5, sdmmc1_dat1_py6, + sdmmc1_dat0_py7, clk2_out_pw5, clk2_req_pcc5, hdmi_int_pn7, ddc_scl_pv4, + ddc_sda_pv5, uart2_rxd_pc3, uart2_txd_pc2, uart2_rts_n_pj6, + uart2_cts_n_pj5, uart3_txd_pw6, uart3_rxd_pw7, uart3_cts_n_pa1, + uart3_rts_n_pc0, pu0, pu1, pu2, pu3, pu4, pu5, pu6, gen1_i2c_sda_pc5, + gen1_i2c_scl_pc4, dap4_fs_pp4, dap4_din_pp5, dap4_dout_pp6, dap4_sclk_pp7, + clk3_out_pee0, clk3_req_pee1, gmi_wp_n_pc7, gmi_iordy_pi5, gmi_wait_pi7, + gmi_adv_n_pk0, gmi_clk_pk1, gmi_cs0_n_pj0, gmi_cs1_n_pj2, gmi_cs2_n_pk3, + gmi_cs3_n_pk4, gmi_cs4_n_pk2, gmi_cs6_n_pi3, gmi_cs7_n_pi6, gmi_ad0_pg0, + gmi_ad1_pg1, gmi_ad2_pg2, gmi_ad3_pg3, gmi_ad4_pg4, gmi_ad5_pg5, + gmi_ad6_pg6, gmi_ad7_pg7, gmi_ad8_ph0, gmi_ad9_ph1, gmi_ad10_ph2, + gmi_ad11_ph3, gmi_ad12_ph4, gmi_ad13_ph5, gmi_ad14_ph6, gmi_ad15_ph7, + gmi_a16_pj7, gmi_a17_pb0, gmi_a18_pb1, gmi_a19_pk7, gmi_wr_n_pi0, + gmi_oe_n_pi1, gmi_dqs_p_pj3, gmi_rst_n_pi4, gen2_i2c_scl_pt5, + gen2_i2c_sda_pt6, sdmmc4_clk_pcc4, sdmmc4_cmd_pt7, sdmmc4_dat0_paa0, + sdmmc4_dat1_paa1, sdmmc4_dat2_paa2, sdmmc4_dat3_paa3, sdmmc4_dat4_paa4, + sdmmc4_dat5_paa5, sdmmc4_dat6_paa6, sdmmc4_dat7_paa7, cam_mclk_pcc0, + pcc1, pbb0, cam_i2c_scl_pbb1, cam_i2c_sda_pbb2, pbb3, pbb4, pbb5, pbb6, + pbb7, pcc2, pwr_i2c_scl_pz6, pwr_i2c_sda_pz7, kb_row0_pr0, kb_row1_pr1, + kb_row2_pr2, kb_row3_pr3, kb_row4_pr4, kb_row5_pr5, kb_row6_pr6, + kb_row7_pr7, kb_row8_ps0, kb_row9_ps1, kb_row10_ps2, kb_col0_pq0, + kb_col1_pq1, kb_col2_pq2, kb_col3_pq3, kb_col4_pq4, kb_col5_pq5, + kb_col6_pq6, kb_col7_pq7, clk_32k_out_pa0, sys_clk_req_pz5, core_pwr_req, + cpu_pwr_req, pwr_int_n, owr, dap1_fs_pn0, dap1_din_pn1, dap1_dout_pn2, + dap1_sclk_pn3, clk1_req_pee2, clk1_out_pw4, spdif_in_pk6, spdif_out_pk5, + dap2_fs_pa2, dap2_din_pa4, dap2_dout_pa5, dap2_sclk_pa3, dvfs_pwm_px0, + gpio_x1_aud_px1, gpio_x3_aud_px3, dvfs_clk_px2, gpio_x4_aud_px4, + gpio_x5_aud_px5, gpio_x6_aud_px6, gpio_x7_aud_px7, sdmmc3_clk_pa6, + sdmmc3_cmd_pa7, sdmmc3_dat0_pb7, sdmmc3_dat1_pb6, sdmmc3_dat2_pb5, + sdmmc3_dat3_pb4, hdmi_cec_pee3, sdmmc1_wp_n_pv3, sdmmc3_cd_n_pv2, + gpio_w2_aud_pw2, gpio_w3_aud_pw3, usb_vbus_en0_pn4, usb_vbus_en1_pn5, + sdmmc3_clk_lb_in_pee5, sdmmc3_clk_lb_out_pee4, reset_out_n. + + drive groups: + + These all support nvidia,pull-down-strength, nvidia,pull-up-strength, + nvidia,slew-rate-rising, nvidia,slew-rate-falling. Most but not all + support nvidia,high-speed-mode, nvidia,schmitt, nvidia,low-power-mode + and nvidia,drive-type. + + ao1, ao2, at1, at2, at3, at4, at5, cdev1, cdev2, dap1, dap2, dap3, dap4, + dbg, sdio3, spi, uaa, uab, uart2, uart3, sdio1, ddc, gma, gme, gmf, gmg, + gmh, owr, uda. + +Example: + + pinmux: pinmux { + compatible = "nvidia,tegra114-pinmux"; + reg = <0x70000868 0x148 /* Pad control registers */ + 0x70003000 0x40c>; /* PinMux registers */ + }; + +Example board file extract: + + pinctrl { + sdmmc4_default: pinmux { + sdmmc4_clk_pcc4 { + nvidia,pins = "sdmmc4_clk_pcc4", + nvidia,function = "sdmmc4"; + nvidia,pull = <0>; + nvidia,tristate = <0>; + }; + sdmmc4_dat0_paa0 { + nvidia,pins = "sdmmc4_dat0_paa0", + "sdmmc4_dat1_paa1", + "sdmmc4_dat2_paa2", + "sdmmc4_dat3_paa3", + "sdmmc4_dat4_paa4", + "sdmmc4_dat5_paa5", + "sdmmc4_dat6_paa6", + "sdmmc4_dat7_paa7"; + nvidia,function = "sdmmc4"; + nvidia,pull = <2>; + nvidia,tristate = <0>; + }; + }; + }; + + sdhci@78000400 { + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc4_default>; + }; diff --git a/Documentation/devicetree/bindings/pinctrl/ste,nomadik.txt b/Documentation/devicetree/bindings/pinctrl/ste,nomadik.txt new file mode 100644 index 000000000000..9a2f3f420526 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/ste,nomadik.txt @@ -0,0 +1,140 @@ +ST Ericsson Nomadik pinmux controller + +Required properties: +- compatible: "stericsson,nmk-pinctrl", "stericsson,nmk-pinctrl-db8540", + "stericsson,nmk-pinctrl-stn8815" +- reg: Should contain the register physical address and length of the PRCMU. + +Please refer to pinctrl-bindings.txt in this directory for details of the +common pinctrl bindings used by client devices, including the meaning of the +phrase "pin configuration node". + +ST Ericsson's pin configuration nodes act as a container for an arbitrary number of +subnodes. Each of these subnodes represents some desired configuration for a +pin, a group, or a list of pins or groups. This configuration can include the +mux function to select on those pin(s)/group(s), and various pin configuration +parameters, such as input, output, pull up, pull down... + +The name of each subnode is not important; all subnodes should be enumerated +and processed purely based on their content. + +Required subnode-properties: +- ste,pins : An array of strings. Each string contains the name of a pin or + group. + +Optional subnode-properties: +- ste,function: A string containing the name of the function to mux to the + pin or group. + +- ste,config: Handle of pin configuration node (e.g. ste,config = <&slpm_in_wkup_pdis>) + +- ste,input : <0/1/2> + 0: input with no pull + 1: input with pull up, + 2: input with pull down, + +- ste,output: <0/1/2> + 0: output low, + 1: output high, + 2: output (value is not specified). + +- ste,sleep: <0/1> + 0: sleep mode disable, + 1: sleep mode enable. + +- ste,sleep-input: <0/1/2/3> + 0: sleep input with no pull, + 1: sleep input with pull up, + 2: sleep input with pull down. + 3: sleep input and keep last input configuration (no pull, pull up or pull down). + +- ste,sleep-output: <0/1/2> + 0: sleep output low, + 1: sleep output high, + 2: sleep output (value is not specified). + +- ste,sleep-gpio: <0/1> + 0: disable sleep gpio mode, + 1: enable sleep gpio mode. + +- ste,sleep-wakeup: <0/1> + 0: wake-up detection enabled, + 1: wake-up detection disabled. + +- ste,sleep-pull-disable: <0/1> + 0: GPIO pull-up or pull-down resistor is enabled, when pin is an input, + 1: GPIO pull-up and pull-down resistor are disabled. + +Example board file extract: + + pinctrl@80157000 { + compatible = "stericsson,nmk-pinctrl"; + reg = <0x80157000 0x2000>; + + pinctrl-names = "default"; + + slpm_in_wkup_pdis: slpm_in_wkup_pdis { + ste,sleep = <1>; + ste,sleep-input = <3>; + ste,sleep-wakeup = <1>; + ste,sleep-pull-disable = <0>; + }; + + slpm_out_hi_wkup_pdis: slpm_out_hi_wkup_pdis { + ste,sleep = <1>; + ste,sleep-output = <1>; + ste,sleep-wakeup = <1>; + ste,sleep-pull-disable = <0>; + }; + + slpm_out_wkup_pdis: slpm_out_wkup_pdis { + ste,sleep = <1>; + ste,sleep-output = <2>; + ste,sleep-wakeup = <1>; + ste,sleep-pull-disable = <0>; + }; + + uart0 { + uart0_default_mux: uart0_mux { + u0_default_mux { + ste,function = "u0"; + ste,pins = "u0_a_1"; + }; + }; + uart0_default_mode: uart0_default { + uart0_default_cfg1 { + ste,pins = "GPIO0", "GPIO2"; + ste,input = <1>; + }; + + uart0_default_cfg2 { + ste,pins = "GPIO1", "GPIO3"; + ste,output = <1>; + }; + }; + uart0_sleep_mode: uart0_sleep { + uart0_sleep_cfg1 { + ste,pins = "GPIO0", "GPIO2"; + ste,config = <&slpm_in_wkup_pdis>; + }; + uart0_sleep_cfg2 { + ste,pins = "GPIO1"; + ste,config = <&slpm_out_hi_wkup_pdis>; + }; + uart0_sleep_cfg3 { + ste,pins = "GPIO3"; + ste,config = <&slpm_out_wkup_pdis>; + }; + }; + }; + }; + + uart@80120000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0x80120000 0x1000>; + interrupts = <0 11 0x4>; + + pinctrl-names = "default","sleep"; + pinctrl-0 = <&uart0_default_mux>, <&uart0_default_mode>; + pinctrl-1 = <&uart0_sleep_mode>; + }; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 902b1b1f568e..15321373ec8d 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -50,6 +50,7 @@ simtek sirf SiRF Technology, Inc. snps Synopsys, Inc. st STMicroelectronics +ste ST-Ericsson stericsson ST-Ericsson ti Texas Instruments via VIA Technologies, Inc. diff --git a/Documentation/pinctrl.txt b/Documentation/pinctrl.txt index da40efbef6ec..a2b57e0a1db0 100644 --- a/Documentation/pinctrl.txt +++ b/Documentation/pinctrl.txt @@ -972,6 +972,18 @@ pinmux core. Pin control requests from drivers ================================= +When a device driver is about to probe the device core will automatically +attempt to issue pinctrl_get_select_default() on these devices. +This way driver writers do not need to add any of the boilerplate code +of the type found below. However when doing fine-grained state selection +and not using the "default" state, you may have to do some device driver +handling of the pinctrl handles and states. + +So if you just want to put the pins for a certain device into the default +state and be done with it, there is nothing you need to do besides +providing the proper mapping table. The device core will take care of +the rest. + Generally it is discouraged to let individual drivers get and enable pin control. So if possible, handle the pin control in platform code or some other place where you have access to all the affected struct device * pointers. In @@ -1097,9 +1109,9 @@ situations that can be electrically unpleasant, you will certainly want to mux in and bias pins in a certain way before the GPIO subsystems starts to deal with them. -The above can be hidden: using pinctrl hogs, the pin control driver may be -setting up the config and muxing for the pins when it is probing, -nevertheless orthogonal to the GPIO subsystem. +The above can be hidden: using the device core, the pinctrl core may be +setting up the config and muxing for the pins right before the device is +probing, nevertheless orthogonal to the GPIO subsystem. But there are also situations where it makes sense for the GPIO subsystem to communicate directly with with the pinctrl subsystem, using the latter diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 9bbe760f2352..6c0900a9bf5c 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1636,7 +1636,7 @@ config ARCH_NR_GPIO default 355 if ARCH_U8500 default 264 if MACH_H4700 default 512 if SOC_OMAP5 - default 288 if ARCH_VT8500 + default 288 if ARCH_VT8500 || ARCH_SUNXI default 0 help Maximum number of GPIOs in the system. diff --git a/arch/arm/boot/dts/dbx5x0.dtsi b/arch/arm/boot/dts/dbx5x0.dtsi index 63f2fbcfe819..69140ba99f46 100644 --- a/arch/arm/boot/dts/dbx5x0.dtsi +++ b/arch/arm/boot/dts/dbx5x0.dtsi @@ -170,10 +170,9 @@ gpio-bank = <8>; }; - pinctrl@80157000 { - // This is actually the PRCMU base address - reg = <0x80157000 0x2000>; - compatible = "stericsson,nmk_pinctrl"; + pinctrl { + compatible = "stericsson,nmk-pinctrl"; + prcm = <&prcmu>; }; usb@a03e0000 { @@ -190,9 +189,10 @@ interrupts = <0 25 0x4>; }; - prcmu@80157000 { + prcmu: prcmu@80157000 { compatible = "stericsson,db8500-prcmu"; reg = <0x80157000 0x1000>; + reg-names = "prcmu"; interrupts = <0 47 0x4>; #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index e61fdd47bd01..f99f60dadf5d 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -16,4 +16,34 @@ memory { reg = <0x40000000 0x80000000>; }; + + soc { + pinctrl@01c20800 { + compatible = "allwinner,sun4i-a10-pinctrl"; + reg = <0x01c20800 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + uart0_pins_a: uart0@0 { + allwinner,pins = "PB22", "PB23"; + allwinner,function = "uart0"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + uart0_pins_b: uart0@1 { + allwinner,pins = "PF2", "PF4"; + allwinner,function = "uart0"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + uart1_pins_a: uart1@0 { + allwinner,pins = "PA10", "PA11"; + allwinner,function = "uart1"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + }; + }; }; diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts index 498a091a4ea2..4a1e45d4aace 100644 --- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts +++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts @@ -24,6 +24,8 @@ soc { uart1: uart@01c28400 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins_b>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi index 59a2d265a98e..e1121890fb29 100644 --- a/arch/arm/boot/dts/sun5i-a13.dtsi +++ b/arch/arm/boot/dts/sun5i-a13.dtsi @@ -17,4 +17,27 @@ memory { reg = <0x40000000 0x20000000>; }; + + soc { + pinctrl@01c20800 { + compatible = "allwinner,sun5i-a13-pinctrl"; + reg = <0x01c20800 0x400>; + #address-cells = <1>; + #size-cells = <0>; + + uart1_pins_a: uart1@0 { + allwinner,pins = "PE10", "PE11"; + allwinner,function = "uart1"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + uart1_pins_b: uart1@1 { + allwinner,pins = "PG3", "PG4"; + allwinner,function = "uart1"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + }; + }; }; diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index 3fdd0085e306..8709a39bd34c 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -7,3 +7,4 @@ config ARCH_SUNXI select PINCTRL select SPARSE_IRQ select SUNXI_TIMER + select PINCTRL_SUNXI
\ No newline at end of file diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index 5dea90636d94..3e5bbd0e5b23 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -11,6 +11,7 @@ config UX500_SOC_COMMON select COMMON_CLK select PINCTRL select PINCTRL_NOMADIK + select PINCTRL_ABX500 select PL310_ERRATA_753970 if CACHE_PL310 config UX500_SOC_DB8500 @@ -18,6 +19,11 @@ config UX500_SOC_DB8500 select CPU_FREQ_TABLE if CPU_FREQ select MFD_DB8500_PRCMU select PINCTRL_DB8500 + select PINCTRL_DB8540 + select PINCTRL_AB8500 + select PINCTRL_AB8505 + select PINCTRL_AB9540 + select PINCTRL_AB8540 select REGULATOR select REGULATOR_DB8500_PRCMU diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c index d453522edb0d..b8781caa54b8 100644 --- a/arch/arm/mach-ux500/board-mop500.c +++ b/arch/arm/mach-ux500/board-mop500.c @@ -90,26 +90,8 @@ static struct platform_device snowball_gpio_en_3v3_regulator_dev = { }, }; -static struct ab8500_gpio_platform_data ab8500_gpio_pdata = { +static struct abx500_gpio_platform_data ab8500_gpio_pdata = { .gpio_base = MOP500_AB8500_PIN_GPIO(1), - .irq_base = MOP500_AB8500_VIR_GPIO_IRQ_BASE, - /* config_reg is the initial configuration of ab8500 pins. - * The pins can be configured as GPIO or alt functions based - * on value present in GpioSel1 to GpioSel6 and AlternatFunction - * register. This is the array of 7 configuration settings. - * One has to compile time decide these settings. Below is the - * explanation of these setting - * GpioSel1 = 0x00 => Pins GPIO1 to GPIO8 are not used as GPIO - * GpioSel2 = 0x1E => Pins GPIO10 to GPIO13 are configured as GPIO - * GpioSel3 = 0x80 => Pin GPIO24 is configured as GPIO - * GpioSel4 = 0x01 => Pin GPIo25 is configured as GPIO - * GpioSel5 = 0x7A => Pins GPIO34, GPIO36 to GPIO39 are conf as GPIO - * GpioSel6 = 0x00 => Pins GPIO41 & GPIo42 are not configured as GPIO - * AlternaFunction = 0x00 => If Pins GPIO10 to 13 are not configured - * as GPIO then this register selectes the alternate fucntions - */ - .config_reg = {0x00, 0x1E, 0x80, 0x01, - 0x7A, 0x00, 0x00}, }; /* ab8500-codec */ diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 5b286e06474c..b80ad9610e97 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -285,7 +285,7 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("st,nomadik-i2c", 0x80110000, "nmk-i2c.3", NULL), OF_DEV_AUXDATA("st,nomadik-i2c", 0x8012a000, "nmk-i2c.4", NULL), /* Requires device name bindings. */ - OF_DEV_AUXDATA("stericsson,nmk_pinctrl", U8500_PRCMU_BASE, + OF_DEV_AUXDATA("stericsson,nmk-pinctrl", U8500_PRCMU_BASE, "pinctrl-db8500", NULL), /* Requires clock name and DMA bindings. */ OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80123000, diff --git a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h index 7d34c52798b5..d526dd8e87d3 100644 --- a/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h +++ b/arch/arm/mach-ux500/include/mach/irqs-board-mop500.h @@ -38,15 +38,7 @@ #define MOP500_STMPE1601_IRQ_END \ MOP500_STMPE1601_IRQ(STMPE_NR_INTERNAL_IRQS) -/* AB8500 virtual gpio IRQ */ -#define AB8500_VIR_GPIO_NR_IRQS 16 - -#define MOP500_AB8500_VIR_GPIO_IRQ_BASE \ - MOP500_STMPE1601_IRQ_END -#define MOP500_AB8500_VIR_GPIO_IRQ_END \ - (MOP500_AB8500_VIR_GPIO_IRQ_BASE + AB8500_VIR_GPIO_NR_IRQS) - -#define MOP500_NR_IRQS MOP500_AB8500_VIR_GPIO_IRQ_END +#define MOP500_NR_IRQS MOP500_STMPE1601_IRQ_END #define MOP500_IRQ_END MOP500_NR_IRQS diff --git a/drivers/base/Makefile b/drivers/base/Makefile index 5aa2d703d19f..4e22ce3ed73d 100644 --- a/drivers/base/Makefile +++ b/drivers/base/Makefile @@ -21,6 +21,7 @@ endif obj-$(CONFIG_SYS_HYPERVISOR) += hypervisor.o obj-$(CONFIG_REGMAP) += regmap/ obj-$(CONFIG_SOC_BUS) += soc.o +obj-$(CONFIG_PINCTRL) += pinctrl.o ccflags-$(CONFIG_DEBUG_DRIVER) := -DDEBUG diff --git a/drivers/base/dd.c b/drivers/base/dd.c index e3bbed8a617c..656310156dde 100644 --- a/drivers/base/dd.c +++ b/drivers/base/dd.c @@ -24,6 +24,7 @@ #include <linux/wait.h> #include <linux/async.h> #include <linux/pm_runtime.h> +#include <linux/pinctrl/devinfo.h> #include "base.h" #include "power/power.h" @@ -269,6 +270,12 @@ static int really_probe(struct device *dev, struct device_driver *drv) WARN_ON(!list_empty(&dev->devres_head)); dev->driver = drv; + + /* If using pinctrl, bind pins now before probing */ + ret = pinctrl_bind_pins(dev); + if (ret) + goto probe_failed; + if (driver_sysfs_add(dev)) { printk(KERN_ERR "%s: driver_sysfs_add(%s) failed\n", __func__, dev_name(dev)); diff --git a/drivers/base/pinctrl.c b/drivers/base/pinctrl.c new file mode 100644 index 000000000000..67a274e86727 --- /dev/null +++ b/drivers/base/pinctrl.c @@ -0,0 +1,69 @@ +/* + * Driver core interface to the pinctrl subsystem. + * + * Copyright (C) 2012 ST-Ericsson SA + * Written on behalf of Linaro for ST-Ericsson + * Based on bits of regulator core, gpio core and clk core + * + * Author: Linus Walleij <linus.walleij@linaro.org> + * + * License terms: GNU General Public License (GPL) version 2 + */ + +#include <linux/device.h> +#include <linux/pinctrl/devinfo.h> +#include <linux/pinctrl/consumer.h> +#include <linux/slab.h> + +/** + * pinctrl_bind_pins() - called by the device core before probe + * @dev: the device that is just about to probe + */ +int pinctrl_bind_pins(struct device *dev) +{ + int ret; + + dev->pins = devm_kzalloc(dev, sizeof(*(dev->pins)), GFP_KERNEL); + if (!dev->pins) + return -ENOMEM; + + dev->pins->p = devm_pinctrl_get(dev); + if (IS_ERR(dev->pins->p)) { + dev_dbg(dev, "no pinctrl handle\n"); + ret = PTR_ERR(dev->pins->p); + goto cleanup_alloc; + } + + dev->pins->default_state = pinctrl_lookup_state(dev->pins->p, + PINCTRL_STATE_DEFAULT); + if (IS_ERR(dev->pins->default_state)) { + dev_dbg(dev, "no default pinctrl state\n"); + ret = 0; + goto cleanup_get; + } + + ret = pinctrl_select_state(dev->pins->p, dev->pins->default_state); + if (ret) { + dev_dbg(dev, "failed to activate default pinctrl state\n"); + goto cleanup_get; + } + + return 0; + + /* + * If no pinctrl handle or default state was found for this device, + * let's explicitly free the pin container in the device, there is + * no point in keeping it around. + */ +cleanup_get: + devm_pinctrl_put(dev->pins->p); +cleanup_alloc: + devm_kfree(dev, dev->pins); + dev->pins = NULL; + + /* Only return deferrals */ + if (ret != -EPROBE_DEFER) + ret = 0; + + return ret; +} diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 682de754d63f..e5116fa85140 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -657,12 +657,6 @@ config GPIO_JANZ_TTL This driver provides support for driving the pins in output mode only. Input mode is not supported. -config GPIO_AB8500 - bool "ST-Ericsson AB8500 Mixed Signal Circuit gpio functions" - depends on AB8500_CORE && BROKEN - help - Select this to enable the AB8500 IC GPIO driver - config GPIO_TPS6586X bool "TPS6586X GPIO" depends on MFD_TPS6586X diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index c5aebd008dde..45a388c21d04 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -10,7 +10,6 @@ obj-$(CONFIG_GPIO_ACPI) += gpiolib-acpi.o obj-$(CONFIG_GPIO_GENERIC) += gpio-generic.o obj-$(CONFIG_GPIO_74X164) += gpio-74x164.o -obj-$(CONFIG_GPIO_AB8500) += gpio-ab8500.o obj-$(CONFIG_GPIO_ADNP) += gpio-adnp.o obj-$(CONFIG_GPIO_ADP5520) += gpio-adp5520.o obj-$(CONFIG_GPIO_ADP5588) += gpio-adp5588.o diff --git a/drivers/gpio/gpio-ab8500.c b/drivers/gpio/gpio-ab8500.c deleted file mode 100644 index 983ad425f0ac..000000000000 --- a/drivers/gpio/gpio-ab8500.c +++ /dev/null @@ -1,520 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2011 - * - * Author: BIBEK BASU <bibek.basu@stericsson.com> - * License terms: GNU General Public License (GPL) version 2 - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/slab.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/err.h> -#include <linux/platform_device.h> -#include <linux/gpio.h> -#include <linux/irq.h> -#include <linux/interrupt.h> -#include <linux/mfd/ab8500.h> -#include <linux/mfd/abx500.h> -#include <linux/mfd/ab8500/gpio.h> - -/* - * GPIO registers offset - * Bank: 0x10 - */ -#define AB8500_GPIO_SEL1_REG 0x00 -#define AB8500_GPIO_SEL2_REG 0x01 -#define AB8500_GPIO_SEL3_REG 0x02 -#define AB8500_GPIO_SEL4_REG 0x03 -#define AB8500_GPIO_SEL5_REG 0x04 -#define AB8500_GPIO_SEL6_REG 0x05 - -#define AB8500_GPIO_DIR1_REG 0x10 -#define AB8500_GPIO_DIR2_REG 0x11 -#define AB8500_GPIO_DIR3_REG 0x12 -#define AB8500_GPIO_DIR4_REG 0x13 -#define AB8500_GPIO_DIR5_REG 0x14 -#define AB8500_GPIO_DIR6_REG 0x15 - -#define AB8500_GPIO_OUT1_REG 0x20 -#define AB8500_GPIO_OUT2_REG 0x21 -#define AB8500_GPIO_OUT3_REG 0x22 -#define AB8500_GPIO_OUT4_REG 0x23 -#define AB8500_GPIO_OUT5_REG 0x24 -#define AB8500_GPIO_OUT6_REG 0x25 - -#define AB8500_GPIO_PUD1_REG 0x30 -#define AB8500_GPIO_PUD2_REG 0x31 -#define AB8500_GPIO_PUD3_REG 0x32 -#define AB8500_GPIO_PUD4_REG 0x33 -#define AB8500_GPIO_PUD5_REG 0x34 -#define AB8500_GPIO_PUD6_REG 0x35 - -#define AB8500_GPIO_IN1_REG 0x40 -#define AB8500_GPIO_IN2_REG 0x41 -#define AB8500_GPIO_IN3_REG 0x42 -#define AB8500_GPIO_IN4_REG 0x43 -#define AB8500_GPIO_IN5_REG 0x44 -#define AB8500_GPIO_IN6_REG 0x45 -#define AB8500_GPIO_ALTFUN_REG 0x45 -#define ALTFUN_REG_INDEX 6 -#define AB8500_NUM_GPIO 42 -#define AB8500_NUM_VIR_GPIO_IRQ 16 - -enum ab8500_gpio_action { - NONE, - STARTUP, - SHUTDOWN, - MASK, - UNMASK -}; - -struct ab8500_gpio { - struct gpio_chip chip; - struct ab8500 *parent; - struct device *dev; - struct mutex lock; - u32 irq_base; - enum ab8500_gpio_action irq_action; - u16 rising; - u16 falling; -}; -/** - * to_ab8500_gpio() - get the pointer to ab8500_gpio - * @chip: Member of the structure ab8500_gpio - */ -static inline struct ab8500_gpio *to_ab8500_gpio(struct gpio_chip *chip) -{ - return container_of(chip, struct ab8500_gpio, chip); -} - -static int ab8500_gpio_set_bits(struct gpio_chip *chip, u8 reg, - unsigned offset, int val) -{ - struct ab8500_gpio *ab8500_gpio = to_ab8500_gpio(chip); - u8 pos = offset % 8; - int ret; - - reg = reg + (offset / 8); - ret = abx500_mask_and_set_register_interruptible(ab8500_gpio->dev, - AB8500_MISC, reg, 1 << pos, val << pos); - if (ret < 0) - dev_err(ab8500_gpio->dev, "%s write failed\n", __func__); - return ret; -} -/** - * ab8500_gpio_get() - Get the particular GPIO value - * @chip: Gpio device - * @offset: GPIO number to read - */ -static int ab8500_gpio_get(struct gpio_chip *chip, unsigned offset) -{ - struct ab8500_gpio *ab8500_gpio = to_ab8500_gpio(chip); - u8 mask = 1 << (offset % 8); - u8 reg = AB8500_GPIO_OUT1_REG + (offset / 8); - int ret; - u8 data; - ret = abx500_get_register_interruptible(ab8500_gpio->dev, AB8500_MISC, - reg, &data); - if (ret < 0) { - dev_err(ab8500_gpio->dev, "%s read failed\n", __func__); - return ret; - } - return (data & mask) >> (offset % 8); -} - -static void ab8500_gpio_set(struct gpio_chip *chip, unsigned offset, int val) -{ - struct ab8500_gpio *ab8500_gpio = to_ab8500_gpio(chip); - int ret; - /* Write the data */ - ret = ab8500_gpio_set_bits(chip, AB8500_GPIO_OUT1_REG, offset, 1); - if (ret < 0) - dev_err(ab8500_gpio->dev, "%s write failed\n", __func__); -} - -static int ab8500_gpio_direction_output(struct gpio_chip *chip, unsigned offset, - int val) -{ - int ret; - /* set direction as output */ - ret = ab8500_gpio_set_bits(chip, AB8500_GPIO_DIR1_REG, offset, 1); - if (ret < 0) - return ret; - /* disable pull down */ - ret = ab8500_gpio_set_bits(chip, AB8500_GPIO_PUD1_REG, offset, 1); - if (ret < 0) - return ret; - /* set the output as 1 or 0 */ - return ab8500_gpio_set_bits(chip, AB8500_GPIO_OUT1_REG, offset, val); - -} - -static int ab8500_gpio_direction_input(struct gpio_chip *chip, unsigned offset) -{ - /* set the register as input */ - return ab8500_gpio_set_bits(chip, AB8500_GPIO_DIR1_REG, offset, 0); -} - -static int ab8500_gpio_to_irq(struct gpio_chip *chip, unsigned offset) -{ - /* - * Only some GPIOs are interrupt capable, and they are - * organized in discontiguous clusters: - * - * GPIO6 to GPIO13 - * GPIO24 and GPIO25 - * GPIO36 to GPIO41 - */ - static struct ab8500_gpio_irq_cluster { - int start; - int end; - } clusters[] = { - {.start = 6, .end = 13}, - {.start = 24, .end = 25}, - {.start = 36, .end = 41}, - }; - struct ab8500_gpio *ab8500_gpio = to_ab8500_gpio(chip); - int base = ab8500_gpio->irq_base; - int i; - - for (i = 0; i < ARRAY_SIZE(clusters); i++) { - struct ab8500_gpio_irq_cluster *cluster = &clusters[i]; - - if (offset >= cluster->start && offset <= cluster->end) - return base + offset - cluster->start; - - /* Advance by the number of gpios in this cluster */ - base += cluster->end - cluster->start + 1; - } - - return -EINVAL; -} - -static struct gpio_chip ab8500gpio_chip = { - .label = "ab8500_gpio", - .owner = THIS_MODULE, - .direction_input = ab8500_gpio_direction_input, - .get = ab8500_gpio_get, - .direction_output = ab8500_gpio_direction_output, - .set = ab8500_gpio_set, - .to_irq = ab8500_gpio_to_irq, -}; - -static unsigned int irq_to_rising(unsigned int irq) -{ - struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq); - int offset = irq - ab8500_gpio->irq_base; - int new_irq = offset + AB8500_INT_GPIO6R - + ab8500_gpio->parent->irq_base; - return new_irq; -} - -static unsigned int irq_to_falling(unsigned int irq) -{ - struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq); - int offset = irq - ab8500_gpio->irq_base; - int new_irq = offset + AB8500_INT_GPIO6F - + ab8500_gpio->parent->irq_base; - return new_irq; - -} - -static unsigned int rising_to_irq(unsigned int irq, void *dev) -{ - struct ab8500_gpio *ab8500_gpio = dev; - int offset = irq - AB8500_INT_GPIO6R - - ab8500_gpio->parent->irq_base ; - int new_irq = offset + ab8500_gpio->irq_base; - return new_irq; -} - -static unsigned int falling_to_irq(unsigned int irq, void *dev) -{ - struct ab8500_gpio *ab8500_gpio = dev; - int offset = irq - AB8500_INT_GPIO6F - - ab8500_gpio->parent->irq_base ; - int new_irq = offset + ab8500_gpio->irq_base; - return new_irq; - -} - -/* - * IRQ handler - */ - -static irqreturn_t handle_rising(int irq, void *dev) -{ - - handle_nested_irq(rising_to_irq(irq , dev)); - return IRQ_HANDLED; -} - -static irqreturn_t handle_falling(int irq, void *dev) -{ - - handle_nested_irq(falling_to_irq(irq, dev)); - return IRQ_HANDLED; -} - -static void ab8500_gpio_irq_lock(unsigned int irq) -{ - struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq); - mutex_lock(&ab8500_gpio->lock); -} - -static void ab8500_gpio_irq_sync_unlock(unsigned int irq) -{ - struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq); - int offset = irq - ab8500_gpio->irq_base; - bool rising = ab8500_gpio->rising & BIT(offset); - bool falling = ab8500_gpio->falling & BIT(offset); - int ret; - - switch (ab8500_gpio->irq_action) { - case STARTUP: - if (rising) - ret = request_threaded_irq(irq_to_rising(irq), - NULL, handle_rising, - IRQF_TRIGGER_RISING, - "ab8500-gpio-r", ab8500_gpio); - if (falling) - ret = request_threaded_irq(irq_to_falling(irq), - NULL, handle_falling, - IRQF_TRIGGER_FALLING, - "ab8500-gpio-f", ab8500_gpio); - break; - case SHUTDOWN: - if (rising) - free_irq(irq_to_rising(irq), ab8500_gpio); - if (falling) - free_irq(irq_to_falling(irq), ab8500_gpio); - break; - case MASK: - if (rising) - disable_irq(irq_to_rising(irq)); - if (falling) - disable_irq(irq_to_falling(irq)); - break; - case UNMASK: - if (rising) - enable_irq(irq_to_rising(irq)); - if (falling) - enable_irq(irq_to_falling(irq)); - break; - case NONE: - break; - } - ab8500_gpio->irq_action = NONE; - ab8500_gpio->rising &= ~(BIT(offset)); - ab8500_gpio->falling &= ~(BIT(offset)); - mutex_unlock(&ab8500_gpio->lock); -} - - -static void ab8500_gpio_irq_mask(unsigned int irq) -{ - struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq); - ab8500_gpio->irq_action = MASK; -} - -static void ab8500_gpio_irq_unmask(unsigned int irq) -{ - struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq); - ab8500_gpio->irq_action = UNMASK; -} - -static int ab8500_gpio_irq_set_type(unsigned int irq, unsigned int type) -{ - struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq); - int offset = irq - ab8500_gpio->irq_base; - - if (type == IRQ_TYPE_EDGE_BOTH) { - ab8500_gpio->rising = BIT(offset); - ab8500_gpio->falling = BIT(offset); - } else if (type == IRQ_TYPE_EDGE_RISING) { - ab8500_gpio->rising = BIT(offset); - } else { - ab8500_gpio->falling = BIT(offset); - } - return 0; -} - -unsigned int ab8500_gpio_irq_startup(unsigned int irq) -{ - struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq); - ab8500_gpio->irq_action = STARTUP; - return 0; -} - -void ab8500_gpio_irq_shutdown(unsigned int irq) -{ - struct ab8500_gpio *ab8500_gpio = get_irq_chip_data(irq); - ab8500_gpio->irq_action = SHUTDOWN; -} - -static struct irq_chip ab8500_gpio_irq_chip = { - .name = "ab8500-gpio", - .startup = ab8500_gpio_irq_startup, - .shutdown = ab8500_gpio_irq_shutdown, - .bus_lock = ab8500_gpio_irq_lock, - .bus_sync_unlock = ab8500_gpio_irq_sync_unlock, - .mask = ab8500_gpio_irq_mask, - .unmask = ab8500_gpio_irq_unmask, - .set_type = ab8500_gpio_irq_set_type, -}; - -static int ab8500_gpio_irq_init(struct ab8500_gpio *ab8500_gpio) -{ - u32 base = ab8500_gpio->irq_base; - int irq; - - for (irq = base; irq < base + AB8500_NUM_VIR_GPIO_IRQ ; irq++) { - set_irq_chip_data(irq, ab8500_gpio); - set_irq_chip_and_handler(irq, &ab8500_gpio_irq_chip, - handle_simple_irq); - set_irq_nested_thread(irq, 1); -#ifdef CONFIG_ARM - set_irq_flags(irq, IRQF_VALID); -#else - set_irq_noprobe(irq); -#endif - } - - return 0; -} - -static void ab8500_gpio_irq_remove(struct ab8500_gpio *ab8500_gpio) -{ - int base = ab8500_gpio->irq_base; - int irq; - - for (irq = base; irq < base + AB8500_NUM_VIR_GPIO_IRQ; irq++) { -#ifdef CONFIG_ARM - set_irq_flags(irq, 0); -#endif - set_irq_chip_and_handler(irq, NULL, NULL); - set_irq_chip_data(irq, NULL); - } -} - -static int ab8500_gpio_probe(struct platform_device *pdev) -{ - struct ab8500_platform_data *ab8500_pdata = - dev_get_platdata(pdev->dev.parent); - struct ab8500_gpio_platform_data *pdata; - struct ab8500_gpio *ab8500_gpio; - int ret; - int i; - - pdata = ab8500_pdata->gpio; - if (!pdata) { - dev_err(&pdev->dev, "gpio platform data missing\n"); - return -ENODEV; - } - - ab8500_gpio = kzalloc(sizeof(struct ab8500_gpio), GFP_KERNEL); - if (ab8500_gpio == NULL) { - dev_err(&pdev->dev, "failed to allocate memory\n"); - return -ENOMEM; - } - ab8500_gpio->dev = &pdev->dev; - ab8500_gpio->parent = dev_get_drvdata(pdev->dev.parent); - ab8500_gpio->chip = ab8500gpio_chip; - ab8500_gpio->chip.ngpio = AB8500_NUM_GPIO; - ab8500_gpio->chip.dev = &pdev->dev; - ab8500_gpio->chip.base = pdata->gpio_base; - ab8500_gpio->irq_base = pdata->irq_base; - /* initialize the lock */ - mutex_init(&ab8500_gpio->lock); - /* - * AB8500 core will handle and clear the IRQ - * configre GPIO based on config-reg value. - * These values are for selecting the PINs as - * GPIO or alternate function - */ - for (i = AB8500_GPIO_SEL1_REG; i <= AB8500_GPIO_SEL6_REG; i++) { - ret = abx500_set_register_interruptible(ab8500_gpio->dev, - AB8500_MISC, i, - pdata->config_reg[i]); - if (ret < 0) - goto out_free; - } - ret = abx500_set_register_interruptible(ab8500_gpio->dev, AB8500_MISC, - AB8500_GPIO_ALTFUN_REG, - pdata->config_reg[ALTFUN_REG_INDEX]); - if (ret < 0) - goto out_free; - - ret = ab8500_gpio_irq_init(ab8500_gpio); - if (ret) - goto out_free; - ret = gpiochip_add(&ab8500_gpio->chip); - if (ret) { - dev_err(&pdev->dev, "unable to add gpiochip: %d\n", - ret); - goto out_rem_irq; - } - platform_set_drvdata(pdev, ab8500_gpio); - return 0; - -out_rem_irq: - ab8500_gpio_irq_remove(ab8500_gpio); -out_free: - mutex_destroy(&ab8500_gpio->lock); - kfree(ab8500_gpio); - return ret; -} - -/* - * ab8500_gpio_remove() - remove Ab8500-gpio driver - * @pdev : Platform device registered - */ -static int ab8500_gpio_remove(struct platform_device *pdev) -{ - struct ab8500_gpio *ab8500_gpio = platform_get_drvdata(pdev); - int ret; - - ret = gpiochip_remove(&ab8500_gpio->chip); - if (ret < 0) { - dev_err(ab8500_gpio->dev, "unable to remove gpiochip: %d\n", - ret); - return ret; - } - - platform_set_drvdata(pdev, NULL); - mutex_destroy(&ab8500_gpio->lock); - kfree(ab8500_gpio); - - return 0; -} - -static struct platform_driver ab8500_gpio_driver = { - .driver = { - .name = "ab8500-gpio", - .owner = THIS_MODULE, - }, - .probe = ab8500_gpio_probe, - .remove = ab8500_gpio_remove, -}; - -static int __init ab8500_gpio_init(void) -{ - return platform_driver_register(&ab8500_gpio_driver); -} -arch_initcall(ab8500_gpio_init); - -static void __exit ab8500_gpio_exit(void) -{ - platform_driver_unregister(&ab8500_gpio_driver); -} -module_exit(ab8500_gpio_exit); - -MODULE_AUTHOR("BIBEK BASU <bibek.basu@stericsson.com>"); -MODULE_DESCRIPTION("Driver allows to use AB8500 unused pins to be used as GPIO"); -MODULE_ALIAS("platform:ab8500-gpio"); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c index d542a141811a..25b1dbe8921d 100644 --- a/drivers/gpio/gpiolib-of.c +++ b/drivers/gpio/gpiolib-of.c @@ -250,7 +250,7 @@ static void of_gpiochip_add_pin_range(struct gpio_chip *chip) * on the same GPIO chip. */ ret = gpiochip_add_pin_range(chip, - pinctrl_dev_get_name(pctldev), + pinctrl_dev_get_devname(pctldev), 0, /* offset in gpiochip */ pinspec.args[0], pinspec.args[1]); diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig index a5f3c8ca480e..393b0ecf4ca4 100644 --- a/drivers/pinctrl/Kconfig +++ b/drivers/pinctrl/Kconfig @@ -26,6 +26,29 @@ config DEBUG_PINCTRL help Say Y here to add some extra checks and diagnostics to PINCTRL calls. +config PINCTRL_ABX500 + bool "ST-Ericsson ABx500 family Mixed Signal Circuit gpio functions" + depends on AB8500_CORE + select GENERIC_PINCONF + help + Select this to enable the ABx500 family IC GPIO driver + +config PINCTRL_AB8500 + bool "AB8500 pin controller driver" + depends on PINCTRL_ABX500 && ARCH_U8500 + +config PINCTRL_AB8540 + bool "AB8540 pin controller driver" + depends on PINCTRL_ABX500 && ARCH_U8500 + +config PINCTRL_AB9540 + bool "AB9540 pin controller driver" + depends on PINCTRL_ABX500 && ARCH_U8500 + +config PINCTRL_AB8505 + bool "AB8505 pin controller driver" + depends on PINCTRL_ABX500 && ARCH_U8500 + config PINCTRL_AT91 bool "AT91 pinctrl driver" depends on OF @@ -151,6 +174,11 @@ config PINCTRL_SIRF depends on ARCH_SIRF select PINMUX +config PINCTRL_SUNXI + bool + select PINMUX + select GENERIC_PINCONF + config PINCTRL_TEGRA bool select PINMUX @@ -164,6 +192,10 @@ config PINCTRL_TEGRA30 bool select PINCTRL_TEGRA +config PINCTRL_TEGRA114 + bool + select PINCTRL_TEGRA + config PINCTRL_U300 bool "U300 pin controller driver" depends on ARCH_U300 diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile index 6e87e52eab5d..0fd5f57fcb57 100644 --- a/drivers/pinctrl/Makefile +++ b/drivers/pinctrl/Makefile @@ -9,6 +9,11 @@ ifeq ($(CONFIG_OF),y) obj-$(CONFIG_PINCTRL) += devicetree.o endif obj-$(CONFIG_GENERIC_PINCONF) += pinconf-generic.o +obj-$(CONFIG_PINCTRL_ABX500) += pinctrl-abx500.o +obj-$(CONFIG_PINCTRL_AB8500) += pinctrl-ab8500.o +obj-$(CONFIG_PINCTRL_AB8540) += pinctrl-ab8540.o +obj-$(CONFIG_PINCTRL_AB9540) += pinctrl-ab9540.o +obj-$(CONFIG_PINCTRL_AB8505) += pinctrl-ab8505.o obj-$(CONFIG_PINCTRL_AT91) += pinctrl-at91.o obj-$(CONFIG_PINCTRL_BCM2835) += pinctrl-bcm2835.o obj-$(CONFIG_PINCTRL_IMX) += pinctrl-imx.o @@ -30,9 +35,11 @@ obj-$(CONFIG_PINCTRL_PXA168) += pinctrl-pxa168.o obj-$(CONFIG_PINCTRL_PXA910) += pinctrl-pxa910.o obj-$(CONFIG_PINCTRL_SINGLE) += pinctrl-single.o obj-$(CONFIG_PINCTRL_SIRF) += pinctrl-sirf.o +obj-$(CONFIG_PINCTRL_SUNXI) += pinctrl-sunxi.o obj-$(CONFIG_PINCTRL_TEGRA) += pinctrl-tegra.o obj-$(CONFIG_PINCTRL_TEGRA20) += pinctrl-tegra20.o obj-$(CONFIG_PINCTRL_TEGRA30) += pinctrl-tegra30.o +obj-$(CONFIG_PINCTRL_TEGRA114) += pinctrl-tegra114.o obj-$(CONFIG_PINCTRL_U300) += pinctrl-u300.o obj-$(CONFIG_PINCTRL_COH901) += pinctrl-coh901.o obj-$(CONFIG_PINCTRL_SAMSUNG) += pinctrl-samsung.o diff --git a/drivers/pinctrl/core.c b/drivers/pinctrl/core.c index 59f5a965bdc4..b0de6e7f1fdb 100644 --- a/drivers/pinctrl/core.c +++ b/drivers/pinctrl/core.c @@ -14,6 +14,7 @@ #define pr_fmt(fmt) "pinctrl core: " fmt #include <linux/kernel.h> +#include <linux/kref.h> #include <linux/export.h> #include <linux/init.h> #include <linux/device.h> @@ -31,17 +32,6 @@ #include "pinmux.h" #include "pinconf.h" -/** - * struct pinctrl_maps - a list item containing part of the mapping table - * @node: mapping table list node - * @maps: array of mapping table entries - * @num_maps: the number of entries in @maps - */ -struct pinctrl_maps { - struct list_head node; - struct pinctrl_map const *maps; - unsigned num_maps; -}; static bool pinctrl_dummy_state; @@ -55,13 +45,8 @@ LIST_HEAD(pinctrldev_list); static LIST_HEAD(pinctrl_list); /* List of pinctrl maps (struct pinctrl_maps) */ -static LIST_HEAD(pinctrl_maps); +LIST_HEAD(pinctrl_maps); -#define for_each_maps(_maps_node_, _i_, _map_) \ - list_for_each_entry(_maps_node_, &pinctrl_maps, node) \ - for (_i_ = 0, _map_ = &_maps_node_->maps[_i_]; \ - _i_ < _maps_node_->num_maps; \ - _i_++, _map_ = &_maps_node_->maps[_i_]) /** * pinctrl_provide_dummies() - indicate if pinctrl provides dummy state support @@ -83,6 +68,12 @@ const char *pinctrl_dev_get_name(struct pinctrl_dev *pctldev) } EXPORT_SYMBOL_GPL(pinctrl_dev_get_name); +const char *pinctrl_dev_get_devname(struct pinctrl_dev *pctldev) +{ + return dev_name(pctldev->dev); +} +EXPORT_SYMBOL_GPL(pinctrl_dev_get_devname); + void *pinctrl_dev_get_drvdata(struct pinctrl_dev *pctldev) { return pctldev->driver_data; @@ -609,13 +600,16 @@ static int add_setting(struct pinctrl *p, struct pinctrl_map const *map) setting->pctldev = get_pinctrl_dev_from_devname(map->ctrl_dev_name); if (setting->pctldev == NULL) { - dev_info(p->dev, "unknown pinctrl device %s in map entry, deferring probe", - map->ctrl_dev_name); kfree(setting); + /* Do not defer probing of hogs (circular loop) */ + if (!strcmp(map->ctrl_dev_name, map->dev_name)) + return -ENODEV; /* * OK let us guess that the driver is not there yet, and * let's defer obtaining this pinctrl handle to later... */ + dev_info(p->dev, "unknown pinctrl device %s in map entry, deferring probe", + map->ctrl_dev_name); return -EPROBE_DEFER; } @@ -694,11 +688,31 @@ static struct pinctrl *create_pinctrl(struct device *dev) continue; ret = add_setting(p, map); - if (ret < 0) { + /* + * At this point the adding of a setting may: + * + * - Defer, if the pinctrl device is not yet available + * - Fail, if the pinctrl device is not yet available, + * AND the setting is a hog. We cannot defer that, since + * the hog will kick in immediately after the device + * is registered. + * + * If the error returned was not -EPROBE_DEFER then we + * accumulate the errors to see if we end up with + * an -EPROBE_DEFER later, as that is the worst case. + */ + if (ret == -EPROBE_DEFER) { pinctrl_put_locked(p, false); return ERR_PTR(ret); } } + if (ret < 0) { + /* If some other error than deferral occured, return here */ + pinctrl_put_locked(p, false); + return ERR_PTR(ret); + } + + kref_init(&p->users); /* Add the pinctrl handle to the global list */ list_add_tail(&p->node, &pinctrl_list); @@ -713,9 +727,17 @@ static struct pinctrl *pinctrl_get_locked(struct device *dev) if (WARN_ON(!dev)) return ERR_PTR(-EINVAL); + /* + * See if somebody else (such as the device core) has already + * obtained a handle to the pinctrl for this device. In that case, + * return another pointer to it. + */ p = find_pinctrl(dev); - if (p != NULL) - return ERR_PTR(-EBUSY); + if (p != NULL) { + dev_dbg(dev, "obtain a copy of previously claimed pinctrl\n"); + kref_get(&p->users); + return p; + } return create_pinctrl(dev); } @@ -771,13 +793,24 @@ static void pinctrl_put_locked(struct pinctrl *p, bool inlist) } /** - * pinctrl_put() - release a previously claimed pinctrl handle + * pinctrl_release() - release the pinctrl handle + * @kref: the kref in the pinctrl being released + */ +static void pinctrl_release(struct kref *kref) +{ + struct pinctrl *p = container_of(kref, struct pinctrl, users); + + pinctrl_put_locked(p, true); +} + +/** + * pinctrl_put() - decrease use count on a previously claimed pinctrl handle * @p: the pinctrl handle to release */ void pinctrl_put(struct pinctrl *p) { mutex_lock(&pinctrl_mutex); - pinctrl_put_locked(p, true); + kref_put(&p->users, pinctrl_release); mutex_unlock(&pinctrl_mutex); } EXPORT_SYMBOL_GPL(pinctrl_put); @@ -1055,6 +1088,30 @@ void pinctrl_unregister_map(struct pinctrl_map const *map) } } +/** + * pinctrl_force_sleep() - turn a given controller device into sleep state + * @pctldev: pin controller device + */ +int pinctrl_force_sleep(struct pinctrl_dev *pctldev) +{ + if (!IS_ERR(pctldev->p) && !IS_ERR(pctldev->hog_sleep)) + return pinctrl_select_state(pctldev->p, pctldev->hog_sleep); + return 0; +} +EXPORT_SYMBOL_GPL(pinctrl_force_sleep); + +/** + * pinctrl_force_default() - turn a given controller device into default state + * @pctldev: pin controller device + */ +int pinctrl_force_default(struct pinctrl_dev *pctldev) +{ + if (!IS_ERR(pctldev->p) && !IS_ERR(pctldev->hog_default)) + return pinctrl_select_state(pctldev->p, pctldev->hog_default); + return 0; +} +EXPORT_SYMBOL_GPL(pinctrl_force_default); + #ifdef CONFIG_DEBUG_FS static int pinctrl_pins_show(struct seq_file *s, void *what) @@ -1500,16 +1557,23 @@ struct pinctrl_dev *pinctrl_register(struct pinctrl_desc *pctldesc, pctldev->p = pinctrl_get_locked(pctldev->dev); if (!IS_ERR(pctldev->p)) { - struct pinctrl_state *s = + pctldev->hog_default = pinctrl_lookup_state_locked(pctldev->p, PINCTRL_STATE_DEFAULT); - if (IS_ERR(s)) { + if (IS_ERR(pctldev->hog_default)) { dev_dbg(dev, "failed to lookup the default state\n"); } else { - if (pinctrl_select_state_locked(pctldev->p, s)) + if (pinctrl_select_state_locked(pctldev->p, + pctldev->hog_default)) dev_err(dev, "failed to select default state\n"); } + + pctldev->hog_sleep = + pinctrl_lookup_state_locked(pctldev->p, + PINCTRL_STATE_SLEEP); + if (IS_ERR(pctldev->hog_sleep)) + dev_dbg(dev, "failed to lookup the sleep state\n"); } mutex_unlock(&pinctrl_mutex); diff --git a/drivers/pinctrl/core.h b/drivers/pinctrl/core.h index 12f5694f3d5d..ee72f1f6d862 100644 --- a/drivers/pinctrl/core.h +++ b/drivers/pinctrl/core.h @@ -9,6 +9,7 @@ * License terms: GNU General Public License (GPL) version 2 */ +#include <linux/kref.h> #include <linux/mutex.h> #include <linux/radix-tree.h> #include <linux/pinctrl/pinconf.h> @@ -30,6 +31,8 @@ struct pinctrl_gpio_range; * @driver_data: driver data for drivers registering to the pin controller * subsystem * @p: result of pinctrl_get() for this device + * @hog_default: default state for pins hogged by this device + * @hog_sleep: sleep state for pins hogged by this device * @device_root: debugfs root for this device */ struct pinctrl_dev { @@ -41,6 +44,8 @@ struct pinctrl_dev { struct module *owner; void *driver_data; struct pinctrl *p; + struct pinctrl_state *hog_default; + struct pinctrl_state *hog_sleep; #ifdef CONFIG_DEBUG_FS struct dentry *device_root; #endif @@ -54,6 +59,7 @@ struct pinctrl_dev { * @state: the current state * @dt_maps: the mapping table chunks dynamically parsed from device tree for * this device, if any + * @users: reference count */ struct pinctrl { struct list_head node; @@ -61,6 +67,7 @@ struct pinctrl { struct list_head states; struct pinctrl_state *state; struct list_head dt_maps; + struct kref users; }; /** @@ -148,6 +155,18 @@ struct pin_desc { #endif }; +/** + * struct pinctrl_maps - a list item containing part of the mapping table + * @node: mapping table list node + * @maps: array of mapping table entries + * @num_maps: the number of entries in @maps + */ +struct pinctrl_maps { + struct list_head node; + struct pinctrl_map const *maps; + unsigned num_maps; +}; + struct pinctrl_dev *get_pinctrl_dev_from_devname(const char *dev_name); int pin_get_from_name(struct pinctrl_dev *pctldev, const char *name); const char *pin_get_name(struct pinctrl_dev *pctldev, const unsigned pin); @@ -164,5 +183,15 @@ int pinctrl_register_map(struct pinctrl_map const *maps, unsigned num_maps, bool dup, bool locked); void pinctrl_unregister_map(struct pinctrl_map const *map); +extern int pinctrl_force_sleep(struct pinctrl_dev *pctldev); +extern int pinctrl_force_default(struct pinctrl_dev *pctldev); + extern struct mutex pinctrl_mutex; extern struct list_head pinctrldev_list; +extern struct list_head pinctrl_maps; + +#define for_each_maps(_maps_node_, _i_, _map_) \ + list_for_each_entry(_maps_node_, &pinctrl_maps, node) \ + for (_i_ = 0, _map_ = &_maps_node_->maps[_i_]; \ + _i_ < _maps_node_->num_maps; \ + _i_++, _map_ = &_maps_node_->maps[_i_]) diff --git a/drivers/pinctrl/devicetree.c b/drivers/pinctrl/devicetree.c index fe2d1af7cfa0..fd40a11ad645 100644 --- a/drivers/pinctrl/devicetree.c +++ b/drivers/pinctrl/devicetree.c @@ -141,6 +141,11 @@ static int dt_to_map_one_config(struct pinctrl *p, const char *statename, pctldev = find_pinctrl_by_of_node(np_pctldev); if (pctldev) break; + /* Do not defer probing of hogs (circular loop) */ + if (np_pctldev == p->dev->of_node) { + of_node_put(np_pctldev); + return -ENODEV; + } } of_node_put(np_pctldev); diff --git a/drivers/pinctrl/pinconf-generic.c b/drivers/pinctrl/pinconf-generic.c index 833a36458157..06c304ac6f7d 100644 --- a/drivers/pinctrl/pinconf-generic.c +++ b/drivers/pinctrl/pinconf-generic.c @@ -41,11 +41,13 @@ struct pin_config_item conf_items[] = { PCONFDUMP(PIN_CONFIG_DRIVE_PUSH_PULL, "output drive push pull", NULL), PCONFDUMP(PIN_CONFIG_DRIVE_OPEN_DRAIN, "output drive open drain", NULL), PCONFDUMP(PIN_CONFIG_DRIVE_OPEN_SOURCE, "output drive open source", NULL), - PCONFDUMP(PIN_CONFIG_INPUT_SCHMITT_DISABLE, "input schmitt disabled", NULL), + PCONFDUMP(PIN_CONFIG_INPUT_SCHMITT_ENABLE, "input schmitt enabled", NULL), PCONFDUMP(PIN_CONFIG_INPUT_SCHMITT, "input schmitt trigger", NULL), PCONFDUMP(PIN_CONFIG_INPUT_DEBOUNCE, "input debounce", "time units"), PCONFDUMP(PIN_CONFIG_POWER_SOURCE, "pin power source", "selector"), + PCONFDUMP(PIN_CONFIG_SLEW_RATE, "slew rate", NULL), PCONFDUMP(PIN_CONFIG_LOW_POWER_MODE, "pin low power", "mode"), + PCONFDUMP(PIN_CONFIG_OUTPUT, "pin output", "level"), }; void pinconf_generic_dump_pin(struct pinctrl_dev *pctldev, diff --git a/drivers/pinctrl/pinconf.c b/drivers/pinctrl/pinconf.c index baee2cc46a17..ac8d382a79bb 100644 --- a/drivers/pinctrl/pinconf.c +++ b/drivers/pinctrl/pinconf.c @@ -574,6 +574,207 @@ static const struct file_operations pinconf_groups_ops = { .release = single_release, }; +/* 32bit read/write ressources */ +#define MAX_NAME_LEN 16 +char dbg_pinname[MAX_NAME_LEN]; /* shared: name of the state of the pin*/ +char dbg_state_name[MAX_NAME_LEN]; /* shared: state of the pin*/ +static u32 dbg_config; /* shared: config to be read/set for the pin & state*/ + +static int pinconf_dbg_pinname_print(struct seq_file *s, void *d) +{ + if (strlen(dbg_pinname)) + seq_printf(s, "%s\n", dbg_pinname); + else + seq_printf(s, "No pin name set\n"); + return 0; +} + +static int pinconf_dbg_pinname_open(struct inode *inode, struct file *file) +{ + return single_open(file, pinconf_dbg_pinname_print, inode->i_private); +} + +static int pinconf_dbg_pinname_write(struct file *file, + const char __user *user_buf, size_t count, loff_t *ppos) +{ + int err; + + if (count > MAX_NAME_LEN) + return -EINVAL; + + err = sscanf(user_buf, "%15s", dbg_pinname); + + if (err != 1) + return -EINVAL; + + return count; +} + +static const struct file_operations pinconf_dbg_pinname_fops = { + .open = pinconf_dbg_pinname_open, + .write = pinconf_dbg_pinname_write, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .owner = THIS_MODULE, +}; + +static int pinconf_dbg_state_print(struct seq_file *s, void *d) +{ + if (strlen(dbg_state_name)) + seq_printf(s, "%s\n", dbg_pinname); + else + seq_printf(s, "No pin state set\n"); + return 0; +} + +static int pinconf_dbg_state_open(struct inode *inode, struct file *file) +{ + return single_open(file, pinconf_dbg_state_print, inode->i_private); +} + +static int pinconf_dbg_state_write(struct file *file, + const char __user *user_buf, size_t count, loff_t *ppos) +{ + int err; + + if (count > MAX_NAME_LEN) + return -EINVAL; + + err = sscanf(user_buf, "%15s", dbg_state_name); + + if (err != 1) + return -EINVAL; + + return count; +} + +static const struct file_operations pinconf_dbg_pinstate_fops = { + .open = pinconf_dbg_state_open, + .write = pinconf_dbg_state_write, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .owner = THIS_MODULE, +}; + +/** + * pinconf_dbg_config_print() - display the pinctrl config from the pinctrl + * map, of a pin/state pair based on pinname and state that have been + * selected with the debugfs entries pinconf-name and pinconf-state + * @s: contains the 32bits config to be written + * @d: not used + */ +static int pinconf_dbg_config_print(struct seq_file *s, void *d) +{ + struct pinctrl_maps *maps_node; + struct pinctrl_map const *map; + struct pinctrl_dev *pctldev = NULL; + struct pinconf_ops *confops = NULL; + int i, j; + bool found = false; + + mutex_lock(&pinctrl_mutex); + + /* Parse the pinctrl map and look for the elected pin/state */ + for_each_maps(maps_node, i, map) { + if (map->type != PIN_MAP_TYPE_CONFIGS_PIN) + continue; + + if (strncmp(map->name, dbg_state_name, MAX_NAME_LEN) > 0) + continue; + + for (j = 0; j < map->data.configs.num_configs; j++) { + if (0 == strncmp(map->data.configs.group_or_pin, + dbg_pinname, MAX_NAME_LEN)) { + /* We found the right pin / state, read the + * config and store the pctldev */ + dbg_config = map->data.configs.configs[j]; + pctldev = get_pinctrl_dev_from_devname + (map->ctrl_dev_name); + found = true; + break; + } + } + } + + mutex_unlock(&pinctrl_mutex); + + if (found) { + seq_printf(s, "Config of %s in state %s: 0x%08X\n", dbg_pinname, + dbg_state_name, dbg_config); + + if (pctldev) + confops = pctldev->desc->confops; + + if (confops && confops->pin_config_config_dbg_show) + confops->pin_config_config_dbg_show(pctldev, + s, dbg_config); + } else { + seq_printf(s, "No pin found for defined name/state\n"); + } + + return 0; +} + +static int pinconf_dbg_config_open(struct inode *inode, struct file *file) +{ + return single_open(file, pinconf_dbg_config_print, inode->i_private); +} + +/** + * pinconf_dbg_config_write() - overwrite the pinctrl config in thepinctrl + * map, of a pin/state pair based on pinname and state that have been + * selected with the debugfs entries pinconf-name and pinconf-state + */ +static int pinconf_dbg_config_write(struct file *file, + const char __user *user_buf, size_t count, loff_t *ppos) +{ + int err; + unsigned long config; + struct pinctrl_maps *maps_node; + struct pinctrl_map const *map; + int i, j; + + err = kstrtoul_from_user(user_buf, count, 0, &config); + + if (err) + return err; + + dbg_config = config; + + mutex_lock(&pinctrl_mutex); + + /* Parse the pinctrl map and look for the selected pin/state */ + for_each_maps(maps_node, i, map) { + if (map->type != PIN_MAP_TYPE_CONFIGS_PIN) + continue; + + if (strncmp(map->name, dbg_state_name, MAX_NAME_LEN) > 0) + continue; + + /* we found the right pin / state, so overwrite config */ + for (j = 0; j < map->data.configs.num_configs; j++) { + if (strncmp(map->data.configs.group_or_pin, dbg_pinname, + MAX_NAME_LEN) == 0) + map->data.configs.configs[j] = dbg_config; + } + } + + mutex_unlock(&pinctrl_mutex); + + return count; +} + +static const struct file_operations pinconf_dbg_pinconfig_fops = { + .open = pinconf_dbg_config_open, + .write = pinconf_dbg_config_write, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, + .owner = THIS_MODULE, +}; + void pinconf_init_device_debugfs(struct dentry *devroot, struct pinctrl_dev *pctldev) { @@ -581,6 +782,12 @@ void pinconf_init_device_debugfs(struct dentry *devroot, devroot, pctldev, &pinconf_pins_ops); debugfs_create_file("pinconf-groups", S_IFREG | S_IRUGO, devroot, pctldev, &pinconf_groups_ops); + debugfs_create_file("pinconf-name", (S_IRUGO | S_IWUSR | S_IWGRP), + devroot, pctldev, &pinconf_dbg_pinname_fops); + debugfs_create_file("pinconf-state", (S_IRUGO | S_IWUSR | S_IWGRP), + devroot, pctldev, &pinconf_dbg_pinstate_fops); + debugfs_create_file("pinconf-config", (S_IRUGO | S_IWUSR | S_IWGRP), + devroot, pctldev, &pinconf_dbg_pinconfig_fops); } #endif diff --git a/drivers/pinctrl/pinctrl-ab8500.c b/drivers/pinctrl/pinctrl-ab8500.c new file mode 100644 index 000000000000..3b471d87c211 --- /dev/null +++ b/drivers/pinctrl/pinctrl-ab8500.c @@ -0,0 +1,484 @@ +/* + * Copyright (C) ST-Ericsson SA 2012 + * + * Author: Patrice Chotard <patrice.chotard@stericsson.com> for ST-Ericsson. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/gpio.h> +#include <linux/pinctrl/pinctrl.h> +#include <linux/mfd/abx500/ab8500.h> +#include "pinctrl-abx500.h" + +/* All the pins that can be used for GPIO and some other functions */ +#define ABX500_GPIO(offset) (offset) + +#define AB8500_PIN_T10 ABX500_GPIO(1) +#define AB8500_PIN_T9 ABX500_GPIO(2) +#define AB8500_PIN_U9 ABX500_GPIO(3) +#define AB8500_PIN_W2 ABX500_GPIO(4) +/* hole */ +#define AB8500_PIN_Y18 ABX500_GPIO(6) +#define AB8500_PIN_AA20 ABX500_GPIO(7) +#define AB8500_PIN_W18 ABX500_GPIO(8) +#define AB8500_PIN_AA19 ABX500_GPIO(9) +#define AB8500_PIN_U17 ABX500_GPIO(10) +#define AB8500_PIN_AA18 ABX500_GPIO(11) +#define AB8500_PIN_U16 ABX500_GPIO(12) +#define AB8500_PIN_W17 ABX500_GPIO(13) +#define AB8500_PIN_F14 ABX500_GPIO(14) +#define AB8500_PIN_B17 ABX500_GPIO(15) +#define AB8500_PIN_F15 ABX500_GPIO(16) +#define AB8500_PIN_P5 ABX500_GPIO(17) +#define AB8500_PIN_R5 ABX500_GPIO(18) +#define AB8500_PIN_U5 ABX500_GPIO(19) +#define AB8500_PIN_T5 ABX500_GPIO(20) +#define AB8500_PIN_H19 ABX500_GPIO(21) +#define AB8500_PIN_G20 ABX500_GPIO(22) +#define AB8500_PIN_G19 ABX500_GPIO(23) +#define AB8500_PIN_T14 ABX500_GPIO(24) +#define AB8500_PIN_R16 ABX500_GPIO(25) +#define AB8500_PIN_M16 ABX500_GPIO(26) +#define AB8500_PIN_J6 ABX500_GPIO(27) +#define AB8500_PIN_K6 ABX500_GPIO(28) +#define AB8500_PIN_G6 ABX500_GPIO(29) +#define AB8500_PIN_H6 ABX500_GPIO(30) +#define AB8500_PIN_F5 ABX500_GPIO(31) +#define AB8500_PIN_G5 ABX500_GPIO(32) +/* hole */ +#define AB8500_PIN_R17 ABX500_GPIO(34) +#define AB8500_PIN_W15 ABX500_GPIO(35) +#define AB8500_PIN_A17 ABX500_GPIO(36) +#define AB8500_PIN_E15 ABX500_GPIO(37) +#define AB8500_PIN_C17 ABX500_GPIO(38) +#define AB8500_PIN_E16 ABX500_GPIO(39) +#define AB8500_PIN_T19 ABX500_GPIO(40) +#define AB8500_PIN_U19 ABX500_GPIO(41) +#define AB8500_PIN_U2 ABX500_GPIO(42) + +/* indicates the highest GPIO number */ +#define AB8500_GPIO_MAX_NUMBER 42 + +/* + * The names of the pins are denoted by GPIO number and ball name, even + * though they can be used for other things than GPIO, this is the first + * column in the table of the data sheet and often used on schematics and + * such. + */ +static const struct pinctrl_pin_desc ab8500_pins[] = { + PINCTRL_PIN(AB8500_PIN_T10, "GPIO1_T10"), + PINCTRL_PIN(AB8500_PIN_T9, "GPIO2_T9"), + PINCTRL_PIN(AB8500_PIN_U9, "GPIO3_U9"), + PINCTRL_PIN(AB8500_PIN_W2, "GPIO4_W2"), + /* hole */ + PINCTRL_PIN(AB8500_PIN_Y18, "GPIO6_Y18"), + PINCTRL_PIN(AB8500_PIN_AA20, "GPIO7_AA20"), + PINCTRL_PIN(AB8500_PIN_W18, "GPIO8_W18"), + PINCTRL_PIN(AB8500_PIN_AA19, "GPIO9_AA19"), + PINCTRL_PIN(AB8500_PIN_U17, "GPIO10_U17"), + PINCTRL_PIN(AB8500_PIN_AA18, "GPIO11_AA18"), + PINCTRL_PIN(AB8500_PIN_U16, "GPIO12_U16"), + PINCTRL_PIN(AB8500_PIN_W17, "GPIO13_W17"), + PINCTRL_PIN(AB8500_PIN_F14, "GPIO14_F14"), + PINCTRL_PIN(AB8500_PIN_B17, "GPIO15_B17"), + PINCTRL_PIN(AB8500_PIN_F15, "GPIO16_F15"), + PINCTRL_PIN(AB8500_PIN_P5, "GPIO17_P5"), + PINCTRL_PIN(AB8500_PIN_R5, "GPIO18_R5"), + PINCTRL_PIN(AB8500_PIN_U5, "GPIO19_U5"), + PINCTRL_PIN(AB8500_PIN_T5, "GPIO20_T5"), + PINCTRL_PIN(AB8500_PIN_H19, "GPIO21_H19"), + PINCTRL_PIN(AB8500_PIN_G20, "GPIO22_G20"), + PINCTRL_PIN(AB8500_PIN_G19, "GPIO23_G19"), + PINCTRL_PIN(AB8500_PIN_T14, "GPIO24_T14"), + PINCTRL_PIN(AB8500_PIN_R16, "GPIO25_R16"), + PINCTRL_PIN(AB8500_PIN_M16, "GPIO26_M16"), + PINCTRL_PIN(AB8500_PIN_J6, "GPIO27_J6"), + PINCTRL_PIN(AB8500_PIN_K6, "GPIO28_K6"), + PINCTRL_PIN(AB8500_PIN_G6, "GPIO29_G6"), + PINCTRL_PIN(AB8500_PIN_H6, "GPIO30_H6"), + PINCTRL_PIN(AB8500_PIN_F5, "GPIO31_F5"), + PINCTRL_PIN(AB8500_PIN_G5, "GPIO32_G5"), + /* hole */ + PINCTRL_PIN(AB8500_PIN_R17, "GPIO34_R17"), + PINCTRL_PIN(AB8500_PIN_W15, "GPIO35_W15"), + PINCTRL_PIN(AB8500_PIN_A17, "GPIO36_A17"), + PINCTRL_PIN(AB8500_PIN_E15, "GPIO37_E15"), + PINCTRL_PIN(AB8500_PIN_C17, "GPIO38_C17"), + PINCTRL_PIN(AB8500_PIN_E16, "GPIO39_E16"), + PINCTRL_PIN(AB8500_PIN_T19, "GPIO40_T19"), + PINCTRL_PIN(AB8500_PIN_U19, "GPIO41_U19"), + PINCTRL_PIN(AB8500_PIN_U2, "GPIO42_U2"), +}; + +/* + * Maps local GPIO offsets to local pin numbers + */ +static const struct abx500_pinrange ab8500_pinranges[] = { + ABX500_PINRANGE(1, 4, ABX500_ALT_A), + ABX500_PINRANGE(6, 4, ABX500_ALT_A), + ABX500_PINRANGE(10, 4, ABX500_DEFAULT), + ABX500_PINRANGE(14, 12, ABX500_ALT_A), + ABX500_PINRANGE(26, 1, ABX500_DEFAULT), + ABX500_PINRANGE(27, 6, ABX500_ALT_A), + ABX500_PINRANGE(34, 1, ABX500_ALT_A), + ABX500_PINRANGE(35, 1, ABX500_DEFAULT), + ABX500_PINRANGE(36, 7, ABX500_ALT_A), +}; + +/* + * Read the pin group names like this: + * sysclkreq2_d_1 = first groups of pins for sysclkreq2 on default function + * + * The groups are arranged as sets per altfunction column, so we can + * mux in one group at a time by selecting the same altfunction for them + * all. When functions require pins on different altfunctions, you need + * to combine several groups. + */ + +/* default column */ +static const unsigned sysclkreq2_d_1_pins[] = { AB8500_PIN_T10 }; +static const unsigned sysclkreq3_d_1_pins[] = { AB8500_PIN_T9 }; +static const unsigned sysclkreq4_d_1_pins[] = { AB8500_PIN_U9 }; +static const unsigned sysclkreq6_d_1_pins[] = { AB8500_PIN_W2 }; +static const unsigned ycbcr0123_d_1_pins[] = { AB8500_PIN_Y18, AB8500_PIN_AA20, + AB8500_PIN_W18, AB8500_PIN_AA19}; +static const unsigned gpio10_d_1_pins[] = { AB8500_PIN_U17 }; +static const unsigned gpio11_d_1_pins[] = { AB8500_PIN_AA18 }; +static const unsigned gpio12_d_1_pins[] = { AB8500_PIN_U16 }; +static const unsigned gpio13_d_1_pins[] = { AB8500_PIN_W17 }; +static const unsigned pwmout1_d_1_pins[] = { AB8500_PIN_F14 }; +static const unsigned pwmout2_d_1_pins[] = { AB8500_PIN_B17 }; +static const unsigned pwmout3_d_1_pins[] = { AB8500_PIN_F15 }; + +/* audio data interface 1*/ +static const unsigned adi1_d_1_pins[] = { AB8500_PIN_P5, AB8500_PIN_R5, + AB8500_PIN_U5, AB8500_PIN_T5 }; +/* USBUICC */ +static const unsigned usbuicc_d_1_pins[] = { AB8500_PIN_H19, AB8500_PIN_G20, + AB8500_PIN_G19 }; +static const unsigned sysclkreq7_d_1_pins[] = { AB8500_PIN_T14 }; +static const unsigned sysclkreq8_d_1_pins[] = { AB8500_PIN_R16 }; +static const unsigned gpio26_d_1_pins[] = { AB8500_PIN_M16 }; +/* Digital microphone 1 and 2 */ +static const unsigned dmic12_d_1_pins[] = { AB8500_PIN_J6, AB8500_PIN_K6 }; +/* Digital microphone 3 and 4 */ +static const unsigned dmic34_d_1_pins[] = { AB8500_PIN_G6, AB8500_PIN_H6 }; +/* Digital microphone 5 and 6 */ +static const unsigned dmic56_d_1_pins[] = { AB8500_PIN_F5, AB8500_PIN_G5 }; +static const unsigned extcpena_d_1_pins[] = { AB8500_PIN_R17 }; +static const unsigned gpio35_d_1_pins[] = { AB8500_PIN_W15 }; +/* APE SPI */ +static const unsigned apespi_d_1_pins[] = { AB8500_PIN_A17, AB8500_PIN_E15, + AB8500_PIN_C17, AB8500_PIN_E16}; +/* modem SDA/SCL */ +static const unsigned modsclsda_d_1_pins[] = { AB8500_PIN_T19, AB8500_PIN_U19 }; +static const unsigned sysclkreq5_d_1_pins[] = { AB8500_PIN_U2 }; + +/* Altfunction A column */ +static const unsigned gpio1_a_1_pins[] = { AB8500_PIN_T10 }; +static const unsigned gpio2_a_1_pins[] = { AB8500_PIN_T9 }; +static const unsigned gpio3_a_1_pins[] = { AB8500_PIN_U9 }; +static const unsigned gpio4_a_1_pins[] = { AB8500_PIN_W2 }; +static const unsigned gpio6_a_1_pins[] = { AB8500_PIN_Y18 }; +static const unsigned gpio7_a_1_pins[] = { AB8500_PIN_AA20 }; +static const unsigned gpio8_a_1_pins[] = { AB8500_PIN_W18 }; +static const unsigned gpio9_a_1_pins[] = { AB8500_PIN_AA19 }; +/* YCbCr4 YCbCr5 YCbCr6 YCbCr7*/ +static const unsigned ycbcr4567_a_1_pins[] = { AB8500_PIN_U17, AB8500_PIN_AA18, + AB8500_PIN_U16, AB8500_PIN_W17}; +static const unsigned gpio14_a_1_pins[] = { AB8500_PIN_F14 }; +static const unsigned gpio15_a_1_pins[] = { AB8500_PIN_B17 }; +static const unsigned gpio16_a_1_pins[] = { AB8500_PIN_F15 }; +static const unsigned gpio17_a_1_pins[] = { AB8500_PIN_P5 }; +static const unsigned gpio18_a_1_pins[] = { AB8500_PIN_R5 }; +static const unsigned gpio19_a_1_pins[] = { AB8500_PIN_U5 }; +static const unsigned gpio20_a_1_pins[] = { AB8500_PIN_T5 }; +static const unsigned gpio21_a_1_pins[] = { AB8500_PIN_H19 }; +static const unsigned gpio22_a_1_pins[] = { AB8500_PIN_G20 }; +static const unsigned gpio23_a_1_pins[] = { AB8500_PIN_G19 }; +static const unsigned gpio24_a_1_pins[] = { AB8500_PIN_T14 }; +static const unsigned gpio25_a_1_pins[] = { AB8500_PIN_R16 }; +static const unsigned gpio27_a_1_pins[] = { AB8500_PIN_J6 }; +static const unsigned gpio28_a_1_pins[] = { AB8500_PIN_K6 }; +static const unsigned gpio29_a_1_pins[] = { AB8500_PIN_G6 }; +static const unsigned gpio30_a_1_pins[] = { AB8500_PIN_H6 }; +static const unsigned gpio31_a_1_pins[] = { AB8500_PIN_F5 }; +static const unsigned gpio32_a_1_pins[] = { AB8500_PIN_G5 }; +static const unsigned gpio34_a_1_pins[] = { AB8500_PIN_R17 }; +static const unsigned gpio36_a_1_pins[] = { AB8500_PIN_A17 }; +static const unsigned gpio37_a_1_pins[] = { AB8500_PIN_E15 }; +static const unsigned gpio38_a_1_pins[] = { AB8500_PIN_C17 }; +static const unsigned gpio39_a_1_pins[] = { AB8500_PIN_E16 }; +static const unsigned gpio40_a_1_pins[] = { AB8500_PIN_T19 }; +static const unsigned gpio41_a_1_pins[] = { AB8500_PIN_U19 }; +static const unsigned gpio42_a_1_pins[] = { AB8500_PIN_U2 }; + +/* Altfunction B colum */ +static const unsigned hiqclkena_b_1_pins[] = { AB8500_PIN_U17 }; +static const unsigned usbuiccpd_b_1_pins[] = { AB8500_PIN_AA18 }; +static const unsigned i2ctrig1_b_1_pins[] = { AB8500_PIN_U16 }; +static const unsigned i2ctrig2_b_1_pins[] = { AB8500_PIN_W17 }; + +/* Altfunction C column */ +static const unsigned usbvdat_c_1_pins[] = { AB8500_PIN_W17 }; + + +#define AB8500_PIN_GROUP(a, b) { .name = #a, .pins = a##_pins, \ + .npins = ARRAY_SIZE(a##_pins), .altsetting = b } + +static const struct abx500_pingroup ab8500_groups[] = { + /* default column */ + AB8500_PIN_GROUP(sysclkreq2_d_1, ABX500_DEFAULT), + AB8500_PIN_GROUP(sysclkreq3_d_1, ABX500_DEFAULT), + AB8500_PIN_GROUP(sysclkreq4_d_1, ABX500_DEFAULT), + AB8500_PIN_GROUP(sysclkreq6_d_1, ABX500_DEFAULT), + AB8500_PIN_GROUP(ycbcr0123_d_1, ABX500_DEFAULT), + AB8500_PIN_GROUP(gpio10_d_1, ABX500_DEFAULT), + AB8500_PIN_GROUP(gpio11_d_1, ABX500_DEFAULT), + AB8500_PIN_GROUP(gpio12_d_1, ABX500_DEFAULT), + AB8500_PIN_GROUP(gpio13_d_1, ABX500_DEFAULT), + AB8500_PIN_GROUP(pwmout1_d_1, ABX500_DEFAULT), + AB8500_PIN_GROUP(pwmout2_d_1, ABX500_DEFAULT), + AB8500_PIN_GROUP(pwmout3_d_1, ABX500_DEFAULT), + AB8500_PIN_GROUP(adi1_d_1, ABX500_DEFAULT), + AB8500_PIN_GROUP(usbuicc_d_1, ABX500_DEFAULT), + AB8500_PIN_GROUP(sysclkreq7_d_1, ABX500_DEFAULT), + AB8500_PIN_GROUP(sysclkreq8_d_1, ABX500_DEFAULT), + AB8500_PIN_GROUP(gpio26_d_1, ABX500_DEFAULT), + AB8500_PIN_GROUP(dmic12_d_1, ABX500_DEFAULT), + AB8500_PIN_GROUP(dmic34_d_1, ABX500_DEFAULT), + AB8500_PIN_GROUP(dmic56_d_1, ABX500_DEFAULT), + AB8500_PIN_GROUP(extcpena_d_1, ABX500_DEFAULT), + AB8500_PIN_GROUP(gpio35_d_1, ABX500_DEFAULT), + AB8500_PIN_GROUP(apespi_d_1, ABX500_DEFAULT), + AB8500_PIN_GROUP(modsclsda_d_1, ABX500_DEFAULT), + AB8500_PIN_GROUP(sysclkreq5_d_1, ABX500_DEFAULT), + /* Altfunction A column */ + AB8500_PIN_GROUP(gpio1_a_1, ABX500_ALT_A), + AB8500_PIN_GROUP(gpio2_a_1, ABX500_ALT_A), + AB8500_PIN_GROUP(gpio3_a_1, ABX500_ALT_A), + AB8500_PIN_GROUP(gpio4_a_1, ABX500_ALT_A), + AB8500_PIN_GROUP(gpio6_a_1, ABX500_ALT_A), + AB8500_PIN_GROUP(gpio7_a_1, ABX500_ALT_A), + AB8500_PIN_GROUP(gpio8_a_1, ABX500_ALT_A), + AB8500_PIN_GROUP(gpio9_a_1, ABX500_ALT_A), + AB8500_PIN_GROUP(ycbcr4567_a_1, ABX500_ALT_A), + AB8500_PIN_GROUP(gpio14_a_1, ABX500_ALT_A), + AB8500_PIN_GROUP(gpio15_a_1, ABX500_ALT_A), + AB8500_PIN_GROUP(gpio16_a_1, ABX500_ALT_A), + AB8500_PIN_GROUP(gpio17_a_1, ABX500_ALT_A), + AB8500_PIN_GROUP(gpio18_a_1, ABX500_ALT_A), + AB8500_PIN_GROUP(gpio19_a_1, ABX500_ALT_A), + AB8500_PIN_GROUP(gpio20_a_1, ABX500_ALT_A), + AB8500_PIN_GROUP(gpio21_a_1, ABX500_ALT_A), + AB8500_PIN_GROUP(gpio22_a_1, ABX500_ALT_A), + AB8500_PIN_GROUP(gpio23_a_1, ABX500_ALT_A), + AB8500_PIN_GROUP(gpio24_a_1, ABX500_ALT_A), + AB8500_PIN_GROUP(gpio25_a_1, ABX500_ALT_A), + AB8500_PIN_GROUP(gpio27_a_1, ABX500_ALT_A), + AB8500_PIN_GROUP(gpio28_a_1, ABX500_ALT_A), + AB8500_PIN_GROUP(gpio29_a_1, ABX500_ALT_A), + AB8500_PIN_GROUP(gpio30_a_1, ABX500_ALT_A), + AB8500_PIN_GROUP(gpio31_a_1, ABX500_ALT_A), + AB8500_PIN_GROUP(gpio32_a_1, ABX500_ALT_A), + AB8500_PIN_GROUP(gpio34_a_1, ABX500_ALT_A), + AB8500_PIN_GROUP(gpio36_a_1, ABX500_ALT_A), + AB8500_PIN_GROUP(gpio37_a_1, ABX500_ALT_A), + AB8500_PIN_GROUP(gpio38_a_1, ABX500_ALT_A), + AB8500_PIN_GROUP(gpio39_a_1, ABX500_ALT_A), + AB8500_PIN_GROUP(gpio40_a_1, ABX500_ALT_A), + AB8500_PIN_GROUP(gpio41_a_1, ABX500_ALT_A), + AB8500_PIN_GROUP(gpio42_a_1, ABX500_ALT_A), + /* Altfunction B column */ + AB8500_PIN_GROUP(hiqclkena_b_1, ABX500_ALT_B), + AB8500_PIN_GROUP(usbuiccpd_b_1, ABX500_ALT_B), + AB8500_PIN_GROUP(i2ctrig1_b_1, ABX500_ALT_B), + AB8500_PIN_GROUP(i2ctrig2_b_1, ABX500_ALT_B), + /* Altfunction C column */ + AB8500_PIN_GROUP(usbvdat_c_1, ABX500_ALT_C), +}; + +/* We use this macro to define the groups applicable to a function */ +#define AB8500_FUNC_GROUPS(a, b...) \ +static const char * const a##_groups[] = { b }; + +AB8500_FUNC_GROUPS(sysclkreq, "sysclkreq2_d_1", "sysclkreq3_d_1", + "sysclkreq4_d_1", "sysclkreq5_d_1", "sysclkreq6_d_1", + "sysclkreq7_d_1", "sysclkreq8_d_1"); +AB8500_FUNC_GROUPS(ycbcr, "ycbcr0123_d_1", "ycbcr4567_a_1"); +AB8500_FUNC_GROUPS(gpio, "gpio1_a_1", "gpio2_a_1", "gpio3_a_1", "gpio4_a_1", + "gpio6_a_1", "gpio7_a_1", "gpio8_a_1", "gpio9_a_1", + "gpio10_d_1", "gpio11_d_1", "gpio12_d_1", "gpio13_d_1", + "gpio14_a_1", "gpio15_a_1", "gpio16_a_1", "gpio17_a_1", + "gpio18_a_1", "gpio19_a_1", "gpio20_a_1", "gpio21_a_1", + "gpio22_a_1", "gpio23_a_1", "gpio24_a_1", "gpio25_a_1", + "gpio26_d_1", "gpio27_a_1", "gpio28_a_1", "gpio29_a_1", + "gpio30_a_1", "gpio31_a_1", "gpio32_a_1", "gpio34_a_1", + "gpio35_d_1", "gpio36_a_1", "gpio37_a_1", "gpio38_a_1", + "gpio39_a_1", "gpio40_a_1", "gpio41_a_1", "gpio42_a_1"); +AB8500_FUNC_GROUPS(pwmout, "pwmout1_d_1", "pwmout2_d_1", "pwmout3_d_1"); +AB8500_FUNC_GROUPS(adi1, "adi1_d_1"); +AB8500_FUNC_GROUPS(usbuicc, "usbuicc_d_1", "usbuiccpd_b_1"); +AB8500_FUNC_GROUPS(dmic, "dmic12_d_1", "dmic34_d_1", "dmic56_d_1"); +AB8500_FUNC_GROUPS(extcpena, "extcpena_d_1"); +AB8500_FUNC_GROUPS(apespi, "apespi_d_1"); +AB8500_FUNC_GROUPS(modsclsda, "modsclsda_d_1"); +AB8500_FUNC_GROUPS(hiqclkena, "hiqclkena_b_1"); +AB8500_FUNC_GROUPS(i2ctrig, "i2ctrig1_b_1", "i2ctrig2_b_1"); +AB8500_FUNC_GROUPS(usbvdat, "usbvdat_c_1"); + +#define FUNCTION(fname) \ + { \ + .name = #fname, \ + .groups = fname##_groups, \ + .ngroups = ARRAY_SIZE(fname##_groups), \ + } + +static const struct abx500_function ab8500_functions[] = { + FUNCTION(sysclkreq), + FUNCTION(ycbcr), + FUNCTION(gpio), + FUNCTION(pwmout), + FUNCTION(adi1), + FUNCTION(usbuicc), + FUNCTION(dmic), + FUNCTION(extcpena), + FUNCTION(apespi), + FUNCTION(modsclsda), + FUNCTION(hiqclkena), + FUNCTION(i2ctrig), + FUNCTION(usbvdat), +}; + +/* + * this table translates what's is in the AB8500 specification regarding the + * balls alternate functions (as for DB, default, ALT_A, ALT_B and ALT_C). + * ALTERNATE_FUNCTIONS(GPIO_NUMBER, GPIOSEL bit, ALTERNATFUNC bit1, + * ALTERNATEFUNC bit2, ALTA val, ALTB val, ALTC val), + * + * example : + * + * ALTERNATE_FUNCTIONS(13, 4, 3, 4, 0, 1 ,2), + * means that pin AB8500_PIN_W17 (pin 13) supports 4 mux (default/ALT_A, + * ALT_B and ALT_C), so GPIOSEL and ALTERNATFUNC registers are used to + * select the mux. ALTA, ALTB and ALTC val indicates values to write in + * ALTERNATFUNC register. We need to specifies these values as SOC + * designers didn't apply the same logic on how to select mux in the + * ABx500 family. + * + * As this pins supports at least ALT_B mux, default mux is + * selected by writing 1 in GPIOSEL bit : + * + * | GPIOSEL bit=4 | alternatfunc bit2=4 | alternatfunc bit1=3 + * default | 1 | 0 | 0 + * alt_A | 0 | 0 | 0 + * alt_B | 0 | 0 | 1 + * alt_C | 0 | 1 | 0 + * + * ALTERNATE_FUNCTIONS(8, 7, UNUSED, UNUSED), + * means that pin AB8500_PIN_W18 (pin 8) supports 2 mux, so only GPIOSEL + * register is used to select the mux. As this pins doesn't support at + * least ALT_B mux, default mux is by writing 0 in GPIOSEL bit : + * + * | GPIOSEL bit=7 | alternatfunc bit2= | alternatfunc bit1= + * default | 0 | 0 | 0 + * alt_A | 1 | 0 | 0 + */ + +struct alternate_functions ab8500_alternate_functions[AB8500_GPIO_MAX_NUMBER + 1] = { + ALTERNATE_FUNCTIONS(0, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO0 */ + ALTERNATE_FUNCTIONS(1, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO1, altA controlled by bit 0 */ + ALTERNATE_FUNCTIONS(2, 1, UNUSED, UNUSED, 0, 0, 0), /* GPIO2, altA controlled by bit 1 */ + ALTERNATE_FUNCTIONS(3, 2, UNUSED, UNUSED, 0, 0, 0), /* GPIO3, altA controlled by bit 2*/ + ALTERNATE_FUNCTIONS(4, 3, UNUSED, UNUSED, 0, 0, 0), /* GPIO4, altA controlled by bit 3*/ + /* bit 4 reserved */ + ALTERNATE_FUNCTIONS(5, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO5 */ + ALTERNATE_FUNCTIONS(6, 5, UNUSED, UNUSED, 0, 0, 0), /* GPIO6, altA controlled by bit 5*/ + ALTERNATE_FUNCTIONS(7, 6, UNUSED, UNUSED, 0, 0, 0), /* GPIO7, altA controlled by bit 6*/ + ALTERNATE_FUNCTIONS(8, 7, UNUSED, UNUSED, 0, 0, 0), /* GPIO8, altA controlled by bit 7*/ + + ALTERNATE_FUNCTIONS(9, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO9, altA controlled by bit 0*/ + ALTERNATE_FUNCTIONS(10, 1, 0, UNUSED, 0, 1, 0), /* GPIO10, altA and altB controlled by bit 0 */ + ALTERNATE_FUNCTIONS(11, 2, 1, UNUSED, 0, 1, 0), /* GPIO11, altA and altB controlled by bit 1 */ + ALTERNATE_FUNCTIONS(12, 3, 2, UNUSED, 0, 1, 0), /* GPIO12, altA and altB controlled by bit 2 */ + ALTERNATE_FUNCTIONS(13, 4, 3, 4, 0, 1, 2), /* GPIO13, altA altB and altC controlled by bit 3 and 4 */ + ALTERNATE_FUNCTIONS(14, 5, UNUSED, UNUSED, 0, 0, 0), /* GPIO14, altA controlled by bit 5 */ + ALTERNATE_FUNCTIONS(15, 6, UNUSED, UNUSED, 0, 0, 0), /* GPIO15, altA controlled by bit 6 */ + ALTERNATE_FUNCTIONS(16, 7, UNUSED, UNUSED, 0, 0, 0), /* GPIO16, altA controlled by bit 7 */ + /* + * pins 17 to 20 are special case, only bit 0 is used to select + * alternate function for these 4 pins. + * bits 1 to 3 are reserved + */ + ALTERNATE_FUNCTIONS(17, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO17, altA controlled by bit 0 */ + ALTERNATE_FUNCTIONS(18, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO18, altA controlled by bit 0 */ + ALTERNATE_FUNCTIONS(19, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO19, altA controlled by bit 0 */ + ALTERNATE_FUNCTIONS(20, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO20, altA controlled by bit 0 */ + ALTERNATE_FUNCTIONS(21, 4, UNUSED, UNUSED, 0, 0, 0), /* GPIO21, altA controlled by bit 4 */ + ALTERNATE_FUNCTIONS(22, 5, UNUSED, UNUSED, 0, 0, 0), /* GPIO22, altA controlled by bit 5 */ + ALTERNATE_FUNCTIONS(23, 6, UNUSED, UNUSED, 0, 0, 0), /* GPIO23, altA controlled by bit 6 */ + ALTERNATE_FUNCTIONS(24, 7, UNUSED, UNUSED, 0, 0, 0), /* GPIO24, altA controlled by bit 7 */ + + ALTERNATE_FUNCTIONS(25, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO25, altA controlled by bit 0 */ + /* pin 26 special case, no alternate function, bit 1 reserved */ + ALTERNATE_FUNCTIONS(26, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* GPIO26 */ + ALTERNATE_FUNCTIONS(27, 2, UNUSED, UNUSED, 0, 0, 0), /* GPIO27, altA controlled by bit 2 */ + ALTERNATE_FUNCTIONS(28, 3, UNUSED, UNUSED, 0, 0, 0), /* GPIO28, altA controlled by bit 3 */ + ALTERNATE_FUNCTIONS(29, 4, UNUSED, UNUSED, 0, 0, 0), /* GPIO29, altA controlled by bit 4 */ + ALTERNATE_FUNCTIONS(30, 5, UNUSED, UNUSED, 0, 0, 0), /* GPIO30, altA controlled by bit 5 */ + ALTERNATE_FUNCTIONS(31, 6, UNUSED, UNUSED, 0, 0, 0), /* GPIO31, altA controlled by bit 6 */ + ALTERNATE_FUNCTIONS(32, 7, UNUSED, UNUSED, 0, 0, 0), /* GPIO32, altA controlled by bit 7 */ + + ALTERNATE_FUNCTIONS(33, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO33 */ + ALTERNATE_FUNCTIONS(34, 1, UNUSED, UNUSED, 0, 0, 0), /* GPIO34, altA controlled by bit 1 */ + /* pin 35 special case, no alternate function, bit 2 reserved */ + ALTERNATE_FUNCTIONS(35, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* GPIO35 */ + ALTERNATE_FUNCTIONS(36, 3, UNUSED, UNUSED, 0, 0, 0), /* GPIO36, altA controlled by bit 3 */ + ALTERNATE_FUNCTIONS(37, 4, UNUSED, UNUSED, 0, 0, 0), /* GPIO37, altA controlled by bit 4 */ + ALTERNATE_FUNCTIONS(38, 5, UNUSED, UNUSED, 0, 0, 0), /* GPIO38, altA controlled by bit 5 */ + ALTERNATE_FUNCTIONS(39, 6, UNUSED, UNUSED, 0, 0, 0), /* GPIO39, altA controlled by bit 6 */ + ALTERNATE_FUNCTIONS(40, 7, UNUSED, UNUSED, 0, 0, 0), /* GPIO40, altA controlled by bit 7 */ + + ALTERNATE_FUNCTIONS(41, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO41, altA controlled by bit 0 */ + ALTERNATE_FUNCTIONS(42, 1, UNUSED, UNUSED, 0, 0, 0), /* GPIO42, altA controlled by bit 1 */ +}; + +/* + * Only some GPIOs are interrupt capable, and they are + * organized in discontiguous clusters: + * + * GPIO6 to GPIO13 + * GPIO24 and GPIO25 + * GPIO36 to GPIO41 + */ +struct abx500_gpio_irq_cluster ab8500_gpio_irq_cluster[] = { + GPIO_IRQ_CLUSTER(6, 13, AB8500_INT_GPIO6R), + GPIO_IRQ_CLUSTER(24, 25, AB8500_INT_GPIO24R), + GPIO_IRQ_CLUSTER(36, 41, AB8500_INT_GPIO36R), +}; + +static struct abx500_pinctrl_soc_data ab8500_soc = { + .gpio_ranges = ab8500_pinranges, + .gpio_num_ranges = ARRAY_SIZE(ab8500_pinranges), + .pins = ab8500_pins, + .npins = ARRAY_SIZE(ab8500_pins), + .functions = ab8500_functions, + .nfunctions = ARRAY_SIZE(ab8500_functions), + .groups = ab8500_groups, + .ngroups = ARRAY_SIZE(ab8500_groups), + .alternate_functions = ab8500_alternate_functions, + .gpio_irq_cluster = ab8500_gpio_irq_cluster, + .ngpio_irq_cluster = ARRAY_SIZE(ab8500_gpio_irq_cluster), + .irq_gpio_rising_offset = AB8500_INT_GPIO6R, + .irq_gpio_falling_offset = AB8500_INT_GPIO6F, + .irq_gpio_factor = 1, +}; + +void abx500_pinctrl_ab8500_init(struct abx500_pinctrl_soc_data **soc) +{ + *soc = &ab8500_soc; +} diff --git a/drivers/pinctrl/pinctrl-ab8505.c b/drivers/pinctrl/pinctrl-ab8505.c new file mode 100644 index 000000000000..3a4238e879e3 --- /dev/null +++ b/drivers/pinctrl/pinctrl-ab8505.c @@ -0,0 +1,380 @@ +/* + * Copyright (C) ST-Ericsson SA 2012 + * + * Author: Patrice Chotard <patrice.chotard@stericsson.com> for ST-Ericsson. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/gpio.h> +#include <linux/pinctrl/pinctrl.h> +#include <linux/mfd/abx500/ab8500.h> +#include "pinctrl-abx500.h" + +/* All the pins that can be used for GPIO and some other functions */ +#define ABX500_GPIO(offset) (offset) + +#define AB8505_PIN_N4 ABX500_GPIO(1) +#define AB8505_PIN_R5 ABX500_GPIO(2) +#define AB8505_PIN_P5 ABX500_GPIO(3) +/* hole */ +#define AB8505_PIN_B16 ABX500_GPIO(10) +#define AB8505_PIN_B17 ABX500_GPIO(11) +/* hole */ +#define AB8505_PIN_D17 ABX500_GPIO(13) +#define AB8505_PIN_C16 ABX500_GPIO(14) +/* hole */ +#define AB8505_PIN_P2 ABX500_GPIO(17) +#define AB8505_PIN_N3 ABX500_GPIO(18) +#define AB8505_PIN_T1 ABX500_GPIO(19) +#define AB8505_PIN_P3 ABX500_GPIO(20) +/* hole */ +#define AB8505_PIN_H14 ABX500_GPIO(34) +/* hole */ +#define AB8505_PIN_J15 ABX500_GPIO(40) +#define AB8505_PIN_J14 ABX500_GPIO(41) +/* hole */ +#define AB8505_PIN_L4 ABX500_GPIO(50) +/* hole */ +#define AB8505_PIN_D16 ABX500_GPIO(52) +#define AB8505_PIN_D15 ABX500_GPIO(53) + +/* indicates the higher GPIO number */ +#define AB8505_GPIO_MAX_NUMBER 53 + +/* + * The names of the pins are denoted by GPIO number and ball name, even + * though they can be used for other things than GPIO, this is the first + * column in the table of the data sheet and often used on schematics and + * such. + */ +static const struct pinctrl_pin_desc ab8505_pins[] = { + PINCTRL_PIN(AB8505_PIN_N4, "GPIO1_N4"), + PINCTRL_PIN(AB8505_PIN_R5, "GPIO2_R5"), + PINCTRL_PIN(AB8505_PIN_P5, "GPIO3_P5"), +/* hole */ + PINCTRL_PIN(AB8505_PIN_B16, "GPIO10_B16"), + PINCTRL_PIN(AB8505_PIN_B17, "GPIO11_B17"), +/* hole */ + PINCTRL_PIN(AB8505_PIN_D17, "GPIO13_D17"), + PINCTRL_PIN(AB8505_PIN_C16, "GPIO14_C16"), +/* hole */ + PINCTRL_PIN(AB8505_PIN_P2, "GPIO17_P2"), + PINCTRL_PIN(AB8505_PIN_N3, "GPIO18_N3"), + PINCTRL_PIN(AB8505_PIN_T1, "GPIO19_T1"), + PINCTRL_PIN(AB8505_PIN_P3, "GPIO20_P3"), +/* hole */ + PINCTRL_PIN(AB8505_PIN_H14, "GPIO34_H14"), +/* hole */ + PINCTRL_PIN(AB8505_PIN_J15, "GPIO40_J15"), + PINCTRL_PIN(AB8505_PIN_J14, "GPIO41_J14"), +/* hole */ + PINCTRL_PIN(AB8505_PIN_L4, "GPIO50_L4"), +/* hole */ + PINCTRL_PIN(AB8505_PIN_D16, "GPIO52_D16"), + PINCTRL_PIN(AB8505_PIN_D15, "GPIO53_D15"), +}; + +/* + * Maps local GPIO offsets to local pin numbers + */ +static const struct abx500_pinrange ab8505_pinranges[] = { + ABX500_PINRANGE(1, 3, ABX500_ALT_A), + ABX500_PINRANGE(10, 2, ABX500_DEFAULT), + ABX500_PINRANGE(13, 1, ABX500_DEFAULT), + ABX500_PINRANGE(14, 1, ABX500_ALT_A), + ABX500_PINRANGE(17, 4, ABX500_ALT_A), + ABX500_PINRANGE(34, 1, ABX500_ALT_A), + ABX500_PINRANGE(40, 2, ABX500_ALT_A), + ABX500_PINRANGE(50, 1, ABX500_DEFAULT), + ABX500_PINRANGE(52, 2, ABX500_ALT_A), +}; + +/* + * Read the pin group names like this: + * sysclkreq2_d_1 = first groups of pins for sysclkreq2 on default function + * + * The groups are arranged as sets per altfunction column, so we can + * mux in one group at a time by selecting the same altfunction for them + * all. When functions require pins on different altfunctions, you need + * to combine several groups. + */ + +/* default column */ +static const unsigned sysclkreq2_d_1_pins[] = { AB8505_PIN_N4 }; +static const unsigned sysclkreq3_d_1_pins[] = { AB8505_PIN_R5 }; +static const unsigned sysclkreq4_d_1_pins[] = { AB8505_PIN_P5 }; +static const unsigned gpio10_d_1_pins[] = { AB8505_PIN_B16 }; +static const unsigned gpio11_d_1_pins[] = { AB8505_PIN_B17 }; +static const unsigned gpio13_d_1_pins[] = { AB8505_PIN_D17 }; +static const unsigned pwmout1_d_1_pins[] = { AB8505_PIN_C16 }; +/* audio data interface 2*/ +static const unsigned adi2_d_1_pins[] = { AB8505_PIN_P2, AB8505_PIN_N3, + AB8505_PIN_T1, AB8505_PIN_P3 }; +static const unsigned extcpena_d_1_pins[] = { AB8505_PIN_H14 }; +/* modem SDA/SCL */ +static const unsigned modsclsda_d_1_pins[] = { AB8505_PIN_J15, AB8505_PIN_J14 }; +static const unsigned gpio50_d_1_pins[] = { AB8505_PIN_L4 }; +static const unsigned resethw_d_1_pins[] = { AB8505_PIN_D16 }; +static const unsigned service_d_1_pins[] = { AB8505_PIN_D15 }; + +/* Altfunction A column */ +static const unsigned gpio1_a_1_pins[] = { AB8505_PIN_N4 }; +static const unsigned gpio2_a_1_pins[] = { AB8505_PIN_R5 }; +static const unsigned gpio3_a_1_pins[] = { AB8505_PIN_P5 }; +static const unsigned hiqclkena_a_1_pins[] = { AB8505_PIN_B16 }; +static const unsigned pdmclk_a_1_pins[] = { AB8505_PIN_B17 }; +static const unsigned uarttxdata_a_1_pins[] = { AB8505_PIN_D17 }; +static const unsigned gpio14_a_1_pins[] = { AB8505_PIN_C16 }; +static const unsigned gpio17_a_1_pins[] = { AB8505_PIN_P2 }; +static const unsigned gpio18_a_1_pins[] = { AB8505_PIN_N3 }; +static const unsigned gpio19_a_1_pins[] = { AB8505_PIN_T1 }; +static const unsigned gpio20_a_1_pins[] = { AB8505_PIN_P3 }; +static const unsigned gpio34_a_1_pins[] = { AB8505_PIN_H14 }; +static const unsigned gpio40_a_1_pins[] = { AB8505_PIN_J15 }; +static const unsigned gpio41_a_1_pins[] = { AB8505_PIN_J14 }; +static const unsigned uartrxdata_a_1_pins[] = { AB8505_PIN_J14 }; +static const unsigned gpio50_a_1_pins[] = { AB8505_PIN_L4 }; +static const unsigned gpio52_a_1_pins[] = { AB8505_PIN_D16 }; +static const unsigned gpio53_a_1_pins[] = { AB8505_PIN_D15 }; + +/* Altfunction B colum */ +static const unsigned pdmdata_b_1_pins[] = { AB8505_PIN_B16 }; +static const unsigned extvibrapwm1_b_1_pins[] = { AB8505_PIN_D17 }; +static const unsigned extvibrapwm2_b_1_pins[] = { AB8505_PIN_L4 }; + +/* Altfunction C column */ +static const unsigned usbvdat_c_1_pins[] = { AB8505_PIN_D17 }; + +#define AB8505_PIN_GROUP(a, b) { .name = #a, .pins = a##_pins, \ + .npins = ARRAY_SIZE(a##_pins), .altsetting = b } + +static const struct abx500_pingroup ab8505_groups[] = { + AB8505_PIN_GROUP(sysclkreq2_d_1, ABX500_DEFAULT), + AB8505_PIN_GROUP(sysclkreq3_d_1, ABX500_DEFAULT), + AB8505_PIN_GROUP(sysclkreq4_d_1, ABX500_DEFAULT), + AB8505_PIN_GROUP(gpio10_d_1, ABX500_DEFAULT), + AB8505_PIN_GROUP(gpio11_d_1, ABX500_DEFAULT), + AB8505_PIN_GROUP(gpio13_d_1, ABX500_DEFAULT), + AB8505_PIN_GROUP(pwmout1_d_1, ABX500_DEFAULT), + AB8505_PIN_GROUP(adi2_d_1, ABX500_DEFAULT), + AB8505_PIN_GROUP(extcpena_d_1, ABX500_DEFAULT), + AB8505_PIN_GROUP(modsclsda_d_1, ABX500_DEFAULT), + AB8505_PIN_GROUP(gpio50_d_1, ABX500_DEFAULT), + AB8505_PIN_GROUP(resethw_d_1, ABX500_DEFAULT), + AB8505_PIN_GROUP(service_d_1, ABX500_DEFAULT), + AB8505_PIN_GROUP(gpio1_a_1, ABX500_ALT_A), + AB8505_PIN_GROUP(gpio2_a_1, ABX500_ALT_A), + AB8505_PIN_GROUP(gpio3_a_1, ABX500_ALT_A), + AB8505_PIN_GROUP(hiqclkena_a_1, ABX500_ALT_A), + AB8505_PIN_GROUP(pdmclk_a_1, ABX500_ALT_A), + AB8505_PIN_GROUP(uarttxdata_a_1, ABX500_ALT_A), + AB8505_PIN_GROUP(gpio14_a_1, ABX500_ALT_A), + AB8505_PIN_GROUP(gpio17_a_1, ABX500_ALT_A), + AB8505_PIN_GROUP(gpio18_a_1, ABX500_ALT_A), + AB8505_PIN_GROUP(gpio19_a_1, ABX500_ALT_A), + AB8505_PIN_GROUP(gpio20_a_1, ABX500_ALT_A), + AB8505_PIN_GROUP(gpio34_a_1, ABX500_ALT_A), + AB8505_PIN_GROUP(gpio40_a_1, ABX500_ALT_A), + AB8505_PIN_GROUP(gpio41_a_1, ABX500_ALT_A), + AB8505_PIN_GROUP(uartrxdata_a_1, ABX500_ALT_A), + AB8505_PIN_GROUP(gpio52_a_1, ABX500_ALT_A), + AB8505_PIN_GROUP(gpio53_a_1, ABX500_ALT_A), + AB8505_PIN_GROUP(pdmdata_b_1, ABX500_ALT_B), + AB8505_PIN_GROUP(extvibrapwm1_b_1, ABX500_ALT_B), + AB8505_PIN_GROUP(extvibrapwm2_b_1, ABX500_ALT_B), + AB8505_PIN_GROUP(usbvdat_c_1, ABX500_ALT_C), +}; + +/* We use this macro to define the groups applicable to a function */ +#define AB8505_FUNC_GROUPS(a, b...) \ +static const char * const a##_groups[] = { b }; + +AB8505_FUNC_GROUPS(sysclkreq, "sysclkreq2_d_1", "sysclkreq3_d_1", + "sysclkreq4_d_1"); +AB8505_FUNC_GROUPS(gpio, "gpio1_a_1", "gpio2_a_1", "gpio3_a_1", + "gpio10_d_1", "gpio11_d_1", "gpio13_d_1", "gpio14_a_1", + "gpio17_a_1", "gpio18_a_1", "gpio19_a_1", "gpio20_a_1", + "gpio34_a_1", "gpio40_a_1", "gpio41_a_1", "gpio50_d_1", + "gpio52_a_1", "gpio53_a_1"); +AB8505_FUNC_GROUPS(pwmout, "pwmout1_d_1"); +AB8505_FUNC_GROUPS(adi2, "adi2_d_1"); +AB8505_FUNC_GROUPS(extcpena, "extcpena_d_1"); +AB8505_FUNC_GROUPS(modsclsda, "modsclsda_d_1"); +AB8505_FUNC_GROUPS(resethw, "resethw_d_1"); +AB8505_FUNC_GROUPS(service, "service_d_1"); +AB8505_FUNC_GROUPS(hiqclkena, "hiqclkena_a_1"); +AB8505_FUNC_GROUPS(pdm, "pdmclk_a_1", "pdmdata_b_1"); +AB8505_FUNC_GROUPS(uartdata, "uarttxdata_a_1", "uartrxdata_a_1"); +AB8505_FUNC_GROUPS(extvibra, "extvibrapwm1_b_1", "extvibrapwm2_b_1"); +AB8505_FUNC_GROUPS(usbvdat, "usbvdat_c_1"); + +#define FUNCTION(fname) \ + { \ + .name = #fname, \ + .groups = fname##_groups, \ + .ngroups = ARRAY_SIZE(fname##_groups), \ + } + +static const struct abx500_function ab8505_functions[] = { + FUNCTION(sysclkreq), + FUNCTION(gpio), + FUNCTION(pwmout), + FUNCTION(adi2), + FUNCTION(extcpena), + FUNCTION(modsclsda), + FUNCTION(resethw), + FUNCTION(service), + FUNCTION(hiqclkena), + FUNCTION(pdm), + FUNCTION(uartdata), + FUNCTION(extvibra), + FUNCTION(extvibra), + FUNCTION(usbvdat), +}; + +/* + * this table translates what's is in the AB8505 specification regarding the + * balls alternate functions (as for DB, default, ALT_A, ALT_B and ALT_C). + * ALTERNATE_FUNCTIONS(GPIO_NUMBER, GPIOSEL bit, ALTERNATFUNC bit1, + * ALTERNATEFUNC bit2, ALTA val, ALTB val, ALTC val), + * + * example : + * + * ALTERNATE_FUNCTIONS(13, 4, 3, 4, 1, 0, 2), + * means that pin AB8505_PIN_D18 (pin 13) supports 4 mux (default/ALT_A, + * ALT_B and ALT_C), so GPIOSEL and ALTERNATFUNC registers are used to + * select the mux. ALTA, ALTB and ALTC val indicates values to write in + * ALTERNATFUNC register. We need to specifies these values as SOC + * designers didn't apply the same logic on how to select mux in the + * ABx500 family. + * + * As this pins supports at least ALT_B mux, default mux is + * selected by writing 1 in GPIOSEL bit : + * + * | GPIOSEL bit=4 | alternatfunc bit2=4 | alternatfunc bit1=3 + * default | 1 | 0 | 0 + * alt_A | 0 | 0 | 1 + * alt_B | 0 | 0 | 0 + * alt_C | 0 | 1 | 0 + * + * ALTERNATE_FUNCTIONS(1, 0, UNUSED, UNUSED), + * means that pin AB9540_PIN_R4 (pin 1) supports 2 mux, so only GPIOSEL + * register is used to select the mux. As this pins doesn't support at + * least ALT_B mux, default mux is by writing 0 in GPIOSEL bit : + * + * | GPIOSEL bit=0 | alternatfunc bit2= | alternatfunc bit1= + * default | 0 | 0 | 0 + * alt_A | 1 | 0 | 0 + */ + +struct alternate_functions ab8505_alternate_functions[AB8505_GPIO_MAX_NUMBER + 1] = { + ALTERNATE_FUNCTIONS(0, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO0 */ + ALTERNATE_FUNCTIONS(1, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO1, altA controlled by bit 0 */ + ALTERNATE_FUNCTIONS(2, 1, UNUSED, UNUSED, 0, 0, 0), /* GPIO2, altA controlled by bit 1 */ + ALTERNATE_FUNCTIONS(3, 2, UNUSED, UNUSED, 0, 0, 0), /* GPIO3, altA controlled by bit 2*/ + ALTERNATE_FUNCTIONS(4, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO4, bit 3 reserved */ + ALTERNATE_FUNCTIONS(5, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO5, bit 4 reserved */ + ALTERNATE_FUNCTIONS(6, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO6, bit 5 reserved */ + ALTERNATE_FUNCTIONS(7, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO7, bit 6 reserved */ + ALTERNATE_FUNCTIONS(8, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO8, bit 7 reserved */ + + ALTERNATE_FUNCTIONS(9, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO9, bit 0 reserved */ + ALTERNATE_FUNCTIONS(10, 1, 0, UNUSED, 1, 0, 0), /* GPIO10, altA and altB controlled by bit 0 */ + ALTERNATE_FUNCTIONS(11, 2, UNUSED, UNUSED, 0, 0, 0), /* GPIO11, altA controlled by bit 2 */ + ALTERNATE_FUNCTIONS(12, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO12, bit3 reseved */ + ALTERNATE_FUNCTIONS(13, 4, 3, 4, 1, 0, 2), /* GPIO13, altA altB and altC controlled by bit 3 and 4 */ + ALTERNATE_FUNCTIONS(14, 5, UNUSED, UNUSED, 0, 0, 0), /* GPIO14, altA controlled by bit 5 */ + ALTERNATE_FUNCTIONS(15, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO15, bit 6 reserved */ + ALTERNATE_FUNCTIONS(16, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO15, bit 7 reserved */ + /* + * pins 17 to 20 are special case, only bit 0 is used to select + * alternate function for these 4 pins. + * bits 1 to 3 are reserved + */ + ALTERNATE_FUNCTIONS(17, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO17, altA controlled by bit 0 */ + ALTERNATE_FUNCTIONS(18, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO18, altA controlled by bit 0 */ + ALTERNATE_FUNCTIONS(19, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO19, altA controlled by bit 0 */ + ALTERNATE_FUNCTIONS(20, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO20, altA controlled by bit 0 */ + ALTERNATE_FUNCTIONS(21, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO21, bit 4 reserved */ + ALTERNATE_FUNCTIONS(22, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO22, bit 5 reserved */ + ALTERNATE_FUNCTIONS(23, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO23, bit 6 reserved */ + ALTERNATE_FUNCTIONS(24, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO24, bit 7 reserved */ + + ALTERNATE_FUNCTIONS(25, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO25, bit 0 reserved */ + ALTERNATE_FUNCTIONS(26, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO26, bit 1 reserved */ + ALTERNATE_FUNCTIONS(27, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO27, bit 2 reserved */ + ALTERNATE_FUNCTIONS(28, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO28, bit 3 reserved */ + ALTERNATE_FUNCTIONS(29, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO29, bit 4 reserved */ + ALTERNATE_FUNCTIONS(30, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO30, bit 5 reserved */ + ALTERNATE_FUNCTIONS(31, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO31, bit 6 reserved */ + ALTERNATE_FUNCTIONS(32, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO32, bit 7 reserved */ + + ALTERNATE_FUNCTIONS(33, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO33, bit 0 reserved */ + ALTERNATE_FUNCTIONS(34, 1, UNUSED, UNUSED, 0, 0, 0), /* GPIO34, altA controlled by bit 1 */ + ALTERNATE_FUNCTIONS(35, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO35, bit 2 reserved */ + ALTERNATE_FUNCTIONS(36, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO36, bit 2 reserved */ + ALTERNATE_FUNCTIONS(37, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO37, bit 2 reserved */ + ALTERNATE_FUNCTIONS(38, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO38, bit 2 reserved */ + ALTERNATE_FUNCTIONS(39, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO39, bit 2 reserved */ + ALTERNATE_FUNCTIONS(40, 7, UNUSED, UNUSED, 0, 0, 0), /* GPIO40, altA controlled by bit 7*/ + + ALTERNATE_FUNCTIONS(41, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO41, altA controlled by bit 0 */ + ALTERNATE_FUNCTIONS(42, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO42, bit 1 reserved */ + ALTERNATE_FUNCTIONS(43, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO43, bit 2 reserved */ + ALTERNATE_FUNCTIONS(44, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO44, bit 3 reserved */ + ALTERNATE_FUNCTIONS(45, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO45, bit 4 reserved */ + ALTERNATE_FUNCTIONS(46, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO46, bit 5 reserved */ + ALTERNATE_FUNCTIONS(47, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO47, bit 6 reserved */ + ALTERNATE_FUNCTIONS(48, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO48, bit 7 reserved */ + + ALTERNATE_FUNCTIONS(49, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO49, bit 0 reserved */ + ALTERNATE_FUNCTIONS(50, 1, 2, UNUSED, 1, 0, 0), /* GPIO50, altA controlled by bit 1 */ + ALTERNATE_FUNCTIONS(51, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO49, bit 0 reserved */ + ALTERNATE_FUNCTIONS(52, 3, UNUSED, UNUSED, 0, 0, 0), /* GPIO52, altA controlled by bit 3 */ + ALTERNATE_FUNCTIONS(53, 4, UNUSED, UNUSED, 0, 0, 0), /* GPIO53, altA controlled by bit 4 */ +}; + +/* + * For AB8505 Only some GPIOs are interrupt capable, and they are + * organized in discontiguous clusters: + * + * GPIO10 to GPIO11 + * GPIO13 + * GPIO40 and GPIO41 + * GPIO50 + * GPIO52 to GPIO53 + */ +struct abx500_gpio_irq_cluster ab8505_gpio_irq_cluster[] = { + GPIO_IRQ_CLUSTER(10, 11, AB8500_INT_GPIO10R), + GPIO_IRQ_CLUSTER(13, 13, AB8500_INT_GPIO13R), + GPIO_IRQ_CLUSTER(40, 41, AB8500_INT_GPIO40R), + GPIO_IRQ_CLUSTER(50, 50, AB9540_INT_GPIO50R), + GPIO_IRQ_CLUSTER(52, 53, AB9540_INT_GPIO52R), +}; + +static struct abx500_pinctrl_soc_data ab8505_soc = { + .gpio_ranges = ab8505_pinranges, + .gpio_num_ranges = ARRAY_SIZE(ab8505_pinranges), + .pins = ab8505_pins, + .npins = ARRAY_SIZE(ab8505_pins), + .functions = ab8505_functions, + .nfunctions = ARRAY_SIZE(ab8505_functions), + .groups = ab8505_groups, + .ngroups = ARRAY_SIZE(ab8505_groups), + .alternate_functions = ab8505_alternate_functions, + .gpio_irq_cluster = ab8505_gpio_irq_cluster, + .ngpio_irq_cluster = ARRAY_SIZE(ab8505_gpio_irq_cluster), + .irq_gpio_rising_offset = AB8500_INT_GPIO6R, + .irq_gpio_falling_offset = AB8500_INT_GPIO6F, + .irq_gpio_factor = 1, +}; + +void +abx500_pinctrl_ab8505_init(struct abx500_pinctrl_soc_data **soc) +{ + *soc = &ab8505_soc; +} diff --git a/drivers/pinctrl/pinctrl-ab8540.c b/drivers/pinctrl/pinctrl-ab8540.c new file mode 100644 index 000000000000..8ee1e8d95f65 --- /dev/null +++ b/drivers/pinctrl/pinctrl-ab8540.c @@ -0,0 +1,407 @@ +/* + * Copyright (C) ST-Ericsson SA 2012 + * + * Author: Patrice Chotard <patrice.chotard@stericsson.com> for ST-Ericsson. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/gpio.h> +#include <linux/pinctrl/pinctrl.h> +#include <linux/mfd/abx500/ab8500.h> +#include "pinctrl-abx500.h" + +/* All the pins that can be used for GPIO and some other functions */ +#define ABX500_GPIO(offset) (offset) + +#define AB8540_PIN_J16 ABX500_GPIO(1) +#define AB8540_PIN_D17 ABX500_GPIO(2) +#define AB8540_PIN_C12 ABX500_GPIO(3) +#define AB8540_PIN_G12 ABX500_GPIO(4) +/* hole */ +#define AB8540_PIN_D16 ABX500_GPIO(14) +#define AB8540_PIN_F15 ABX500_GPIO(15) +#define AB8540_PIN_J8 ABX500_GPIO(16) +#define AB8540_PIN_K16 ABX500_GPIO(17) +#define AB8540_PIN_G15 ABX500_GPIO(18) +#define AB8540_PIN_F17 ABX500_GPIO(19) +#define AB8540_PIN_E17 ABX500_GPIO(20) +/* hole */ +#define AB8540_PIN_AA16 ABX500_GPIO(27) +#define AB8540_PIN_W18 ABX500_GPIO(28) +#define AB8540_PIN_Y15 ABX500_GPIO(29) +#define AB8540_PIN_W16 ABX500_GPIO(30) +#define AB8540_PIN_V15 ABX500_GPIO(31) +#define AB8540_PIN_W17 ABX500_GPIO(32) +/* hole */ +#define AB8540_PIN_D12 ABX500_GPIO(42) +#define AB8540_PIN_P4 ABX500_GPIO(43) +#define AB8540_PIN_AB1 ABX500_GPIO(44) +#define AB8540_PIN_K7 ABX500_GPIO(45) +#define AB8540_PIN_L7 ABX500_GPIO(46) +#define AB8540_PIN_G10 ABX500_GPIO(47) +#define AB8540_PIN_K12 ABX500_GPIO(48) +/* hole */ +#define AB8540_PIN_N8 ABX500_GPIO(51) +#define AB8540_PIN_P12 ABX500_GPIO(52) +#define AB8540_PIN_K8 ABX500_GPIO(53) +#define AB8540_PIN_J11 ABX500_GPIO(54) +#define AB8540_PIN_AC2 ABX500_GPIO(55) +#define AB8540_PIN_AB2 ABX500_GPIO(56) + +/* indicates the highest GPIO number */ +#define AB8540_GPIO_MAX_NUMBER 56 + +/* + * The names of the pins are denoted by GPIO number and ball name, even + * though they can be used for other things than GPIO, this is the first + * column in the table of the data sheet and often used on schematics and + * such. + */ +static const struct pinctrl_pin_desc ab8540_pins[] = { + PINCTRL_PIN(AB8540_PIN_J16, "GPIO1_J16"), + PINCTRL_PIN(AB8540_PIN_D17, "GPIO2_D17"), + PINCTRL_PIN(AB8540_PIN_C12, "GPIO3_C12"), + PINCTRL_PIN(AB8540_PIN_G12, "GPIO4_G12"), + /* hole */ + PINCTRL_PIN(AB8540_PIN_D16, "GPIO14_D16"), + PINCTRL_PIN(AB8540_PIN_F15, "GPIO15_F15"), + PINCTRL_PIN(AB8540_PIN_J8, "GPIO16_J8"), + PINCTRL_PIN(AB8540_PIN_K16, "GPIO17_K16"), + PINCTRL_PIN(AB8540_PIN_G15, "GPIO18_G15"), + PINCTRL_PIN(AB8540_PIN_F17, "GPIO19_F17"), + PINCTRL_PIN(AB8540_PIN_E17, "GPIO20_E17"), + /* hole */ + PINCTRL_PIN(AB8540_PIN_AA16, "GPIO27_AA16"), + PINCTRL_PIN(AB8540_PIN_W18, "GPIO28_W18"), + PINCTRL_PIN(AB8540_PIN_Y15, "GPIO29_Y15"), + PINCTRL_PIN(AB8540_PIN_W16, "GPIO30_W16"), + PINCTRL_PIN(AB8540_PIN_V15, "GPIO31_V15"), + PINCTRL_PIN(AB8540_PIN_W17, "GPIO32_W17"), + /* hole */ + PINCTRL_PIN(AB8540_PIN_D12, "GPIO42_D12"), + PINCTRL_PIN(AB8540_PIN_P4, "GPIO43_P4"), + PINCTRL_PIN(AB8540_PIN_AB1, "GPIO44_AB1"), + PINCTRL_PIN(AB8540_PIN_K7, "GPIO45_K7"), + PINCTRL_PIN(AB8540_PIN_L7, "GPIO46_L7"), + PINCTRL_PIN(AB8540_PIN_G10, "GPIO47_G10"), + PINCTRL_PIN(AB8540_PIN_K12, "GPIO48_K12"), + /* hole */ + PINCTRL_PIN(AB8540_PIN_N8, "GPIO51_N8"), + PINCTRL_PIN(AB8540_PIN_P12, "GPIO52_P12"), + PINCTRL_PIN(AB8540_PIN_K8, "GPIO53_K8"), + PINCTRL_PIN(AB8540_PIN_J11, "GPIO54_J11"), + PINCTRL_PIN(AB8540_PIN_AC2, "GPIO55_AC2"), + PINCTRL_PIN(AB8540_PIN_AB2, "GPIO56_AB2"), +}; + +/* + * Maps local GPIO offsets to local pin numbers + */ +static const struct abx500_pinrange ab8540_pinranges[] = { + ABX500_PINRANGE(1, 4, ABX500_ALT_A), + ABX500_PINRANGE(14, 7, ABX500_ALT_A), + ABX500_PINRANGE(27, 6, ABX500_ALT_A), + ABX500_PINRANGE(42, 7, ABX500_ALT_A), + ABX500_PINRANGE(51, 6, ABX500_ALT_A), +}; + +/* + * Read the pin group names like this: + * sysclkreq2_d_1 = first groups of pins for sysclkreq2 on default function + * + * The groups are arranged as sets per altfunction column, so we can + * mux in one group at a time by selecting the same altfunction for them + * all. When functions require pins on different altfunctions, you need + * to combine several groups. + */ + +/* default column */ +static const unsigned sysclkreq2_d_1_pins[] = { AB8540_PIN_J16 }; +static const unsigned sysclkreq3_d_1_pins[] = { AB8540_PIN_D17 }; +static const unsigned sysclkreq4_d_1_pins[] = { AB8540_PIN_C12 }; +static const unsigned sysclkreq6_d_1_pins[] = { AB8540_PIN_G12 }; +static const unsigned pwmout1_d_1_pins[] = { AB8540_PIN_D16 }; +static const unsigned pwmout2_d_1_pins[] = { AB8540_PIN_F15 }; +static const unsigned pwmout3_d_1_pins[] = { AB8540_PIN_J8 }; + +/* audio data interface 1*/ +static const unsigned adi1_d_1_pins[] = { AB8540_PIN_K16, AB8540_PIN_G15, + AB8540_PIN_F17, AB8540_PIN_E17 }; +/* Digital microphone 1 and 2 */ +static const unsigned dmic12_d_1_pins[] = { AB8540_PIN_AA16, AB8540_PIN_W18 }; +/* Digital microphone 3 and 4 */ +static const unsigned dmic34_d_1_pins[] = { AB8540_PIN_Y15, AB8540_PIN_W16 }; +/* Digital microphone 5 and 6 */ +static const unsigned dmic56_d_1_pins[] = { AB8540_PIN_V15, AB8540_PIN_W17 }; +static const unsigned sysclkreq5_d_1_pins[] = { AB8540_PIN_D12 }; +static const unsigned batremn_d_1_pins[] = { AB8540_PIN_P4 }; +static const unsigned service_d_1_pins[] = { AB8540_PIN_AB1 }; +static const unsigned pwrctrl0_d_1_pins[] = { AB8540_PIN_K7 }; +static const unsigned pwrctrl1_d_1_pins[] = { AB8540_PIN_L7 }; +static const unsigned pwmextvibra1_d_1_pins[] = { AB8540_PIN_G10 }; +static const unsigned pwmextvibra2_d_1_pins[] = { AB8540_PIN_K12 }; +static const unsigned gpio1_vbat_d_1_pins[] = { AB8540_PIN_N8 }; +static const unsigned gpio2_vbat_d_1_pins[] = { AB8540_PIN_P12 }; +static const unsigned gpio3_vbat_d_1_pins[] = { AB8540_PIN_K8 }; +static const unsigned gpio4_vbat_d_1_pins[] = { AB8540_PIN_J11 }; +static const unsigned pdmclkdat_d_1_pins[] = { AB8540_PIN_AC2, AB8540_PIN_AB2 }; + +/* Altfunction A column */ +static const unsigned gpio1_a_1_pins[] = { AB8540_PIN_J16 }; +static const unsigned gpio2_a_1_pins[] = { AB8540_PIN_D17 }; +static const unsigned gpio3_a_1_pins[] = { AB8540_PIN_C12 }; +static const unsigned gpio4_a_1_pins[] = { AB8540_PIN_G12 }; +static const unsigned gpio14_a_1_pins[] = { AB8540_PIN_D16 }; +static const unsigned gpio15_a_1_pins[] = { AB8540_PIN_F15 }; +static const unsigned gpio16_a_1_pins[] = { AB8540_PIN_J8 }; +static const unsigned gpio17_a_1_pins[] = { AB8540_PIN_K16 }; +static const unsigned gpio18_a_1_pins[] = { AB8540_PIN_G15 }; +static const unsigned gpio19_a_1_pins[] = { AB8540_PIN_F17 }; +static const unsigned gpio20_a_1_pins[] = { AB8540_PIN_E17 }; +static const unsigned gpio27_a_1_pins[] = { AB8540_PIN_AA16 }; +static const unsigned gpio28_a_1_pins[] = { AB8540_PIN_W18 }; +static const unsigned gpio29_a_1_pins[] = { AB8540_PIN_Y15 }; +static const unsigned gpio30_a_1_pins[] = { AB8540_PIN_W16 }; +static const unsigned gpio31_a_1_pins[] = { AB8540_PIN_V15 }; +static const unsigned gpio32_a_1_pins[] = { AB8540_PIN_W17 }; +static const unsigned gpio42_a_1_pins[] = { AB8540_PIN_D12 }; +static const unsigned gpio43_a_1_pins[] = { AB8540_PIN_P4 }; +static const unsigned gpio44_a_1_pins[] = { AB8540_PIN_AB1 }; +static const unsigned gpio45_a_1_pins[] = { AB8540_PIN_K7 }; +static const unsigned gpio46_a_1_pins[] = { AB8540_PIN_L7 }; +static const unsigned gpio47_a_1_pins[] = { AB8540_PIN_G10 }; +static const unsigned gpio48_a_1_pins[] = { AB8540_PIN_K12 }; +static const unsigned gpio51_a_1_pins[] = { AB8540_PIN_N8 }; +static const unsigned gpio52_a_1_pins[] = { AB8540_PIN_P12 }; +static const unsigned gpio53_a_1_pins[] = { AB8540_PIN_K8 }; +static const unsigned gpio54_a_1_pins[] = { AB8540_PIN_J11 }; +static const unsigned gpio55_a_1_pins[] = { AB8540_PIN_AC2 }; +static const unsigned gpio56_a_1_pins[] = { AB8540_PIN_AB2 }; + +#define AB8540_PIN_GROUP(a, b) { .name = #a, .pins = a##_pins, \ + .npins = ARRAY_SIZE(a##_pins), .altsetting = b } + +static const struct abx500_pingroup ab8540_groups[] = { + /* default column */ + AB8540_PIN_GROUP(sysclkreq2_d_1, ABX500_DEFAULT), + AB8540_PIN_GROUP(sysclkreq3_d_1, ABX500_DEFAULT), + AB8540_PIN_GROUP(sysclkreq4_d_1, ABX500_DEFAULT), + AB8540_PIN_GROUP(sysclkreq6_d_1, ABX500_DEFAULT), + AB8540_PIN_GROUP(pwmout1_d_1, ABX500_DEFAULT), + AB8540_PIN_GROUP(pwmout2_d_1, ABX500_DEFAULT), + AB8540_PIN_GROUP(pwmout3_d_1, ABX500_DEFAULT), + AB8540_PIN_GROUP(adi1_d_1, ABX500_DEFAULT), + AB8540_PIN_GROUP(dmic12_d_1, ABX500_DEFAULT), + AB8540_PIN_GROUP(dmic34_d_1, ABX500_DEFAULT), + AB8540_PIN_GROUP(dmic56_d_1, ABX500_DEFAULT), + AB8540_PIN_GROUP(sysclkreq5_d_1, ABX500_DEFAULT), + AB8540_PIN_GROUP(batremn_d_1, ABX500_DEFAULT), + AB8540_PIN_GROUP(service_d_1, ABX500_DEFAULT), + AB8540_PIN_GROUP(pwrctrl0_d_1, ABX500_DEFAULT), + AB8540_PIN_GROUP(pwrctrl1_d_1, ABX500_DEFAULT), + AB8540_PIN_GROUP(pwmextvibra1_d_1, ABX500_DEFAULT), + AB8540_PIN_GROUP(pwmextvibra2_d_1, ABX500_DEFAULT), + AB8540_PIN_GROUP(gpio1_vbat_d_1, ABX500_DEFAULT), + AB8540_PIN_GROUP(gpio2_vbat_d_1, ABX500_DEFAULT), + AB8540_PIN_GROUP(gpio3_vbat_d_1, ABX500_DEFAULT), + AB8540_PIN_GROUP(gpio4_vbat_d_1, ABX500_DEFAULT), + AB8540_PIN_GROUP(pdmclkdat_d_1, ABX500_DEFAULT), + /* Altfunction A column */ + AB8540_PIN_GROUP(gpio1_a_1, ABX500_ALT_A), + AB8540_PIN_GROUP(gpio2_a_1, ABX500_ALT_A), + AB8540_PIN_GROUP(gpio3_a_1, ABX500_ALT_A), + AB8540_PIN_GROUP(gpio4_a_1, ABX500_ALT_A), + AB8540_PIN_GROUP(gpio14_a_1, ABX500_ALT_A), + AB8540_PIN_GROUP(gpio15_a_1, ABX500_ALT_A), + AB8540_PIN_GROUP(gpio16_a_1, ABX500_ALT_A), + AB8540_PIN_GROUP(gpio17_a_1, ABX500_ALT_A), + AB8540_PIN_GROUP(gpio18_a_1, ABX500_ALT_A), + AB8540_PIN_GROUP(gpio19_a_1, ABX500_ALT_A), + AB8540_PIN_GROUP(gpio20_a_1, ABX500_ALT_A), + AB8540_PIN_GROUP(gpio27_a_1, ABX500_ALT_A), + AB8540_PIN_GROUP(gpio28_a_1, ABX500_ALT_A), + AB8540_PIN_GROUP(gpio29_a_1, ABX500_ALT_A), + AB8540_PIN_GROUP(gpio30_a_1, ABX500_ALT_A), + AB8540_PIN_GROUP(gpio31_a_1, ABX500_ALT_A), + AB8540_PIN_GROUP(gpio32_a_1, ABX500_ALT_A), + AB8540_PIN_GROUP(gpio42_a_1, ABX500_ALT_A), + AB8540_PIN_GROUP(gpio43_a_1, ABX500_ALT_A), + AB8540_PIN_GROUP(gpio44_a_1, ABX500_ALT_A), + AB8540_PIN_GROUP(gpio45_a_1, ABX500_ALT_A), + AB8540_PIN_GROUP(gpio46_a_1, ABX500_ALT_A), + AB8540_PIN_GROUP(gpio47_a_1, ABX500_ALT_A), + AB8540_PIN_GROUP(gpio48_a_1, ABX500_ALT_A), + AB8540_PIN_GROUP(gpio51_a_1, ABX500_ALT_A), + AB8540_PIN_GROUP(gpio52_a_1, ABX500_ALT_A), + AB8540_PIN_GROUP(gpio53_a_1, ABX500_ALT_A), + AB8540_PIN_GROUP(gpio54_a_1, ABX500_ALT_A), + AB8540_PIN_GROUP(gpio55_a_1, ABX500_ALT_A), + AB8540_PIN_GROUP(gpio56_a_1, ABX500_ALT_A), +}; + +/* We use this macro to define the groups applicable to a function */ +#define AB8540_FUNC_GROUPS(a, b...) \ +static const char * const a##_groups[] = { b }; + +AB8540_FUNC_GROUPS(sysclkreq, "sysclkreq2_d_1", "sysclkreq3_d_1", + "sysclkreq4_d_1", "sysclkreq5_d_1", "sysclkreq6_d_1"); +AB8540_FUNC_GROUPS(gpio, "gpio1_a_1", "gpio2_a_1", "gpio3_a_1", "gpio4_a_1", + "gpio14_a_1", "gpio15_a_1", "gpio16_a_1", "gpio17_a_1", + "gpio18_a_1", "gpio19_a_1", "gpio20_a_1", "gpio27_a_1", + "gpio28_a_1", "gpio29_a_1", "gpio30_a_1", "gpio31_a_1", + "gpio32_a_1", "gpio42_a_1", "gpio43_a_1", "gpio44_a_1", + "gpio45_a_1", "gpio46_a_1", "gpio47_a_1", "gpio48_a_1", + "gpio51_a_1", "gpio52_a_1", "gpio53_a_1", "gpio54_a_1", + "gpio55_a_1", "gpio56_a_1"); +AB8540_FUNC_GROUPS(pwmout, "pwmout1_d_1", "pwmout2_d_1", "pwmout3_d_1"); +AB8540_FUNC_GROUPS(adi1, "adi1_d_1"); +AB8540_FUNC_GROUPS(dmic, "dmic12_d_1", "dmic34_d_1", "dmic56_d_1"); +AB8540_FUNC_GROUPS(batremn, "batremn_d_1"); +AB8540_FUNC_GROUPS(service, "service_d_1"); +AB8540_FUNC_GROUPS(pwrctrl, "pwrctrl0_d_1", "pwrctrl1_d_1"); +AB8540_FUNC_GROUPS(pwmextvibra, "pwmextvibra1_d_1", "pwmextvibra2_d_1"); +AB8540_FUNC_GROUPS(gpio_vbat, "gpio1_vbat_d_1", "gpio2_vbat_d_1", + "gpio3_vbat_d_1", "gpio4_vbat_d_1"); +AB8540_FUNC_GROUPS(pdm, "pdmclkdat_d_1"); + +#define FUNCTION(fname) \ + { \ + .name = #fname, \ + .groups = fname##_groups, \ + .ngroups = ARRAY_SIZE(fname##_groups), \ + } + +static const struct abx500_function ab8540_functions[] = { + FUNCTION(sysclkreq), + FUNCTION(gpio), + FUNCTION(pwmout), + FUNCTION(adi1), + FUNCTION(dmic), + FUNCTION(batremn), + FUNCTION(service), + FUNCTION(pwrctrl), + FUNCTION(pwmextvibra), + FUNCTION(gpio_vbat), + FUNCTION(pdm), +}; + +/* + * this table translates what's is in the AB8540 specification regarding the + * balls alternate functions (as for DB, default, ALT_A, ALT_B and ALT_C). + * ALTERNATE_FUNCTIONS(GPIO_NUMBER, GPIOSEL bit, ALTERNATFUNC bit1, + * ALTERNATEFUNC bit2, ALTA val, ALTB val, ALTC val), + * AB8540 only supports DEFAULT and ALTA functions, so ALTERNATFUNC + * registers is not used + * + */ + +struct alternate_functions ab8540_alternate_functions[AB8540_GPIO_MAX_NUMBER + 1] = { + /* GPIOSEL1 - bit 4-7 reserved */ + ALTERNATE_FUNCTIONS(0, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO0 */ + ALTERNATE_FUNCTIONS(1, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO1, altA controlled by bit 0 */ + ALTERNATE_FUNCTIONS(2, 1, UNUSED, UNUSED, 0, 0, 0), /* GPIO2, altA controlled by bit 1 */ + ALTERNATE_FUNCTIONS(3, 2, UNUSED, UNUSED, 0, 0, 0), /* GPIO3, altA controlled by bit 2*/ + ALTERNATE_FUNCTIONS(4, 3, UNUSED, UNUSED, 0, 0, 0), /* GPIO4, altA controlled by bit 3*/ + ALTERNATE_FUNCTIONS(5, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO5 */ + ALTERNATE_FUNCTIONS(6, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO6 */ + ALTERNATE_FUNCTIONS(7, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO7 */ + ALTERNATE_FUNCTIONS(8, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO8 */ + /* GPIOSEL2 - bit 0-4 reserved */ + ALTERNATE_FUNCTIONS(9, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO9 */ + ALTERNATE_FUNCTIONS(10, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO10 */ + ALTERNATE_FUNCTIONS(11, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO11 */ + ALTERNATE_FUNCTIONS(12, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO12 */ + ALTERNATE_FUNCTIONS(13, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO13 */ + ALTERNATE_FUNCTIONS(14, 5, UNUSED, UNUSED, 0, 0, 0), /* GPIO14, altA controlled by bit 5 */ + ALTERNATE_FUNCTIONS(15, 6, UNUSED, UNUSED, 0, 0, 0), /* GPIO15, altA controlled by bit 6 */ + ALTERNATE_FUNCTIONS(16, 7, UNUSED, UNUSED, 0, 0, 0), /* GPIO16, altA controlled by bit 7 */ + /* GPIOSEL3 - bit 4-7 reserved */ + ALTERNATE_FUNCTIONS(17, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO17, altA controlled by bit 0 */ + ALTERNATE_FUNCTIONS(18, 1, UNUSED, UNUSED, 0, 0, 0), /* GPIO18, altA controlled by bit 1 */ + ALTERNATE_FUNCTIONS(19, 2, UNUSED, UNUSED, 0, 0, 0), /* GPIO19, altA controlled by bit 2 */ + ALTERNATE_FUNCTIONS(20, 3, UNUSED, UNUSED, 0, 0, 0), /* GPIO20, altA controlled by bit 3 */ + ALTERNATE_FUNCTIONS(21, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO21 */ + ALTERNATE_FUNCTIONS(22, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO22 */ + ALTERNATE_FUNCTIONS(23, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO23 */ + ALTERNATE_FUNCTIONS(24, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO24 */ + /* GPIOSEL4 - bit 0-1 reserved */ + ALTERNATE_FUNCTIONS(25, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO25 */ + ALTERNATE_FUNCTIONS(26, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO26 */ + ALTERNATE_FUNCTIONS(27, 2, UNUSED, UNUSED, 0, 0, 0), /* GPIO27, altA controlled by bit 2 */ + ALTERNATE_FUNCTIONS(28, 3, UNUSED, UNUSED, 0, 0, 0), /* GPIO28, altA controlled by bit 3 */ + ALTERNATE_FUNCTIONS(29, 4, UNUSED, UNUSED, 0, 0, 0), /* GPIO29, altA controlled by bit 4 */ + ALTERNATE_FUNCTIONS(30, 5, UNUSED, UNUSED, 0, 0, 0), /* GPIO30, altA controlled by bit 5 */ + ALTERNATE_FUNCTIONS(31, 6, UNUSED, UNUSED, 0, 0, 0), /* GPIO31, altA controlled by bit 6 */ + ALTERNATE_FUNCTIONS(32, 7, UNUSED, UNUSED, 0, 0, 0), /* GPIO32, altA controlled by bit 7 */ + /* GPIOSEL5 - bit 0-7 reserved */ + ALTERNATE_FUNCTIONS(33, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO33 */ + ALTERNATE_FUNCTIONS(34, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO34 */ + ALTERNATE_FUNCTIONS(35, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO35 */ + ALTERNATE_FUNCTIONS(36, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO36 */ + ALTERNATE_FUNCTIONS(37, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO37 */ + ALTERNATE_FUNCTIONS(38, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO38 */ + ALTERNATE_FUNCTIONS(39, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO39 */ + ALTERNATE_FUNCTIONS(40, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO40 */ + /* GPIOSEL6 - bit 0 reserved */ + ALTERNATE_FUNCTIONS(41, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO41 */ + ALTERNATE_FUNCTIONS(42, 1, UNUSED, UNUSED, 0, 0, 0), /* GPIO42, altA controlled by bit 1 */ + ALTERNATE_FUNCTIONS(43, 2, UNUSED, UNUSED, 0, 0, 0), /* GPIO43, altA controlled by bit 2 */ + ALTERNATE_FUNCTIONS(44, 3, UNUSED, UNUSED, 0, 0, 0), /* GPIO44, altA controlled by bit 3 */ + ALTERNATE_FUNCTIONS(45, 4, UNUSED, UNUSED, 0, 0, 0), /* GPIO45, altA controlled by bit 4 */ + ALTERNATE_FUNCTIONS(46, 5, UNUSED, UNUSED, 0, 0, 0), /* GPIO46, altA controlled by bit 5 */ + ALTERNATE_FUNCTIONS(47, 6, UNUSED, UNUSED, 0, 0, 0), /* GPIO47, altA controlled by bit 6 */ + ALTERNATE_FUNCTIONS(48, 7, UNUSED, UNUSED, 0, 0, 0), /* GPIO48, altA controlled by bit 7 */ + /* GPIOSEL7 - bit 0-1 reserved */ + ALTERNATE_FUNCTIONS(49, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO49 */ + ALTERNATE_FUNCTIONS(50, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO50 */ + ALTERNATE_FUNCTIONS(51, 2, UNUSED, UNUSED, 0, 0, 0), /* GPIO51, altA controlled by bit 2 */ + ALTERNATE_FUNCTIONS(52, 3, UNUSED, UNUSED, 0, 0, 0), /* GPIO52, altA controlled by bit 3 */ + ALTERNATE_FUNCTIONS(53, 4, UNUSED, UNUSED, 0, 0, 0), /* GPIO53, altA controlled by bit 4 */ + ALTERNATE_FUNCTIONS(54, 5, UNUSED, UNUSED, 0, 0, 0), /* GPIO54, altA controlled by bit 5 */ + ALTERNATE_FUNCTIONS(55, 6, UNUSED, UNUSED, 0, 0, 0), /* GPIO55, altA controlled by bit 6 */ + ALTERNATE_FUNCTIONS(56, 7, UNUSED, UNUSED, 0, 0, 0), /* GPIO56, altA controlled by bit 7 */ +}; + +static struct pullud ab8540_pullud = { + .first_pin = 51, /* GPIO1_VBAT */ + .last_pin = 54, /* GPIO4_VBAT */ +}; + +/* + * For AB8540 Only some GPIOs are interrupt capable: + * GPIO43 to GPIO44 + * GPIO51 to GPIO54 + */ +struct abx500_gpio_irq_cluster ab8540_gpio_irq_cluster[] = { + GPIO_IRQ_CLUSTER(43, 43, AB8540_INT_GPIO43F), + GPIO_IRQ_CLUSTER(44, 44, AB8540_INT_GPIO44F), + GPIO_IRQ_CLUSTER(51, 54, AB9540_INT_GPIO51R), +}; + +static struct abx500_pinctrl_soc_data ab8540_soc = { + .gpio_ranges = ab8540_pinranges, + .gpio_num_ranges = ARRAY_SIZE(ab8540_pinranges), + .pins = ab8540_pins, + .npins = ARRAY_SIZE(ab8540_pins), + .functions = ab8540_functions, + .nfunctions = ARRAY_SIZE(ab8540_functions), + .groups = ab8540_groups, + .ngroups = ARRAY_SIZE(ab8540_groups), + .alternate_functions = ab8540_alternate_functions, + .pullud = &ab8540_pullud, + .gpio_irq_cluster = ab8540_gpio_irq_cluster, + .ngpio_irq_cluster = ARRAY_SIZE(ab8540_gpio_irq_cluster), + .irq_gpio_rising_offset = AB8540_INT_GPIO43R, + .irq_gpio_falling_offset = AB8540_INT_GPIO43F, + .irq_gpio_factor = 2, +}; + +void +abx500_pinctrl_ab8540_init(struct abx500_pinctrl_soc_data **soc) +{ + *soc = &ab8540_soc; +} diff --git a/drivers/pinctrl/pinctrl-ab9540.c b/drivers/pinctrl/pinctrl-ab9540.c new file mode 100644 index 000000000000..7610bd012b98 --- /dev/null +++ b/drivers/pinctrl/pinctrl-ab9540.c @@ -0,0 +1,485 @@ +/* + * Copyright (C) ST-Ericsson SA 2012 + * + * Author: Patrice Chotard <patrice.chotard@stericsson.com> for ST-Ericsson. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/gpio.h> +#include <linux/pinctrl/pinctrl.h> +#include <linux/mfd/abx500/ab8500.h> +#include "pinctrl-abx500.h" + +/* All the pins that can be used for GPIO and some other functions */ +#define ABX500_GPIO(offset) (offset) + +#define AB9540_PIN_R4 ABX500_GPIO(1) +#define AB9540_PIN_V3 ABX500_GPIO(2) +#define AB9540_PIN_T4 ABX500_GPIO(3) +#define AB9540_PIN_T5 ABX500_GPIO(4) +/* hole */ +#define AB9540_PIN_B18 ABX500_GPIO(10) +#define AB9540_PIN_C18 ABX500_GPIO(11) +/* hole */ +#define AB9540_PIN_D18 ABX500_GPIO(13) +#define AB9540_PIN_B19 ABX500_GPIO(14) +#define AB9540_PIN_C19 ABX500_GPIO(15) +#define AB9540_PIN_D19 ABX500_GPIO(16) +#define AB9540_PIN_R3 ABX500_GPIO(17) +#define AB9540_PIN_T2 ABX500_GPIO(18) +#define AB9540_PIN_U2 ABX500_GPIO(19) +#define AB9540_PIN_V2 ABX500_GPIO(20) +#define AB9540_PIN_N17 ABX500_GPIO(21) +#define AB9540_PIN_N16 ABX500_GPIO(22) +#define AB9540_PIN_M19 ABX500_GPIO(23) +#define AB9540_PIN_T3 ABX500_GPIO(24) +#define AB9540_PIN_W2 ABX500_GPIO(25) +/* hole */ +#define AB9540_PIN_H4 ABX500_GPIO(27) +#define AB9540_PIN_F1 ABX500_GPIO(28) +#define AB9540_PIN_F4 ABX500_GPIO(29) +#define AB9540_PIN_F2 ABX500_GPIO(30) +#define AB9540_PIN_E4 ABX500_GPIO(31) +#define AB9540_PIN_F3 ABX500_GPIO(32) +/* hole */ +#define AB9540_PIN_J13 ABX500_GPIO(34) +/* hole */ +#define AB9540_PIN_L17 ABX500_GPIO(40) +#define AB9540_PIN_L16 ABX500_GPIO(41) +#define AB9540_PIN_W3 ABX500_GPIO(42) +#define AB9540_PIN_N4 ABX500_GPIO(50) +#define AB9540_PIN_G12 ABX500_GPIO(51) +#define AB9540_PIN_E17 ABX500_GPIO(52) +#define AB9540_PIN_D11 ABX500_GPIO(53) +#define AB9540_PIN_M18 ABX500_GPIO(54) + +/* indicates the highest GPIO number */ +#define AB9540_GPIO_MAX_NUMBER 54 + +/* + * The names of the pins are denoted by GPIO number and ball name, even + * though they can be used for other things than GPIO, this is the first + * column in the table of the data sheet and often used on schematics and + * such. + */ +static const struct pinctrl_pin_desc ab9540_pins[] = { + PINCTRL_PIN(AB9540_PIN_R4, "GPIO1_R4"), + PINCTRL_PIN(AB9540_PIN_V3, "GPIO2_V3"), + PINCTRL_PIN(AB9540_PIN_T4, "GPIO3_T4"), + PINCTRL_PIN(AB9540_PIN_T5, "GPIO4_T5"), + /* hole */ + PINCTRL_PIN(AB9540_PIN_B18, "GPIO10_B18"), + PINCTRL_PIN(AB9540_PIN_C18, "GPIO11_C18"), + /* hole */ + PINCTRL_PIN(AB9540_PIN_D18, "GPIO13_D18"), + PINCTRL_PIN(AB9540_PIN_B19, "GPIO14_B19"), + PINCTRL_PIN(AB9540_PIN_C19, "GPIO15_C19"), + PINCTRL_PIN(AB9540_PIN_D19, "GPIO16_D19"), + PINCTRL_PIN(AB9540_PIN_R3, "GPIO17_R3"), + PINCTRL_PIN(AB9540_PIN_T2, "GPIO18_T2"), + PINCTRL_PIN(AB9540_PIN_U2, "GPIO19_U2"), + PINCTRL_PIN(AB9540_PIN_V2, "GPIO20_V2"), + PINCTRL_PIN(AB9540_PIN_N17, "GPIO21_N17"), + PINCTRL_PIN(AB9540_PIN_N16, "GPIO22_N16"), + PINCTRL_PIN(AB9540_PIN_M19, "GPIO23_M19"), + PINCTRL_PIN(AB9540_PIN_T3, "GPIO24_T3"), + PINCTRL_PIN(AB9540_PIN_W2, "GPIO25_W2"), + /* hole */ + PINCTRL_PIN(AB9540_PIN_H4, "GPIO27_H4"), + PINCTRL_PIN(AB9540_PIN_F1, "GPIO28_F1"), + PINCTRL_PIN(AB9540_PIN_F4, "GPIO29_F4"), + PINCTRL_PIN(AB9540_PIN_F2, "GPIO30_F2"), + PINCTRL_PIN(AB9540_PIN_E4, "GPIO31_E4"), + PINCTRL_PIN(AB9540_PIN_F3, "GPIO32_F3"), + /* hole */ + PINCTRL_PIN(AB9540_PIN_J13, "GPIO34_J13"), + /* hole */ + PINCTRL_PIN(AB9540_PIN_L17, "GPIO40_L17"), + PINCTRL_PIN(AB9540_PIN_L16, "GPIO41_L16"), + PINCTRL_PIN(AB9540_PIN_W3, "GPIO42_W3"), + PINCTRL_PIN(AB9540_PIN_N4, "GPIO50_N4"), + PINCTRL_PIN(AB9540_PIN_G12, "GPIO51_G12"), + PINCTRL_PIN(AB9540_PIN_E17, "GPIO52_E17"), + PINCTRL_PIN(AB9540_PIN_D11, "GPIO53_D11"), + PINCTRL_PIN(AB9540_PIN_M18, "GPIO60_M18"), +}; + +/* + * Maps local GPIO offsets to local pin numbers + */ +static const struct abx500_pinrange ab9540_pinranges[] = { + ABX500_PINRANGE(1, 4, ABX500_ALT_A), + ABX500_PINRANGE(10, 2, ABX500_DEFAULT), + ABX500_PINRANGE(13, 1, ABX500_DEFAULT), + ABX500_PINRANGE(14, 12, ABX500_ALT_A), + ABX500_PINRANGE(27, 6, ABX500_ALT_A), + ABX500_PINRANGE(34, 1, ABX500_ALT_A), + ABX500_PINRANGE(40, 3, ABX500_ALT_A), + ABX500_PINRANGE(50, 1, ABX500_DEFAULT), + ABX500_PINRANGE(51, 3, ABX500_ALT_A), + ABX500_PINRANGE(54, 1, ABX500_DEFAULT), +}; + +/* + * Read the pin group names like this: + * sysclkreq2_d_1 = first groups of pins for sysclkreq2 on default function + * + * The groups are arranged as sets per altfunction column, so we can + * mux in one group at a time by selecting the same altfunction for them + * all. When functions require pins on different altfunctions, you need + * to combine several groups. + */ + +/* default column */ +static const unsigned sysclkreq2_d_1_pins[] = { AB9540_PIN_R4 }; +static const unsigned sysclkreq3_d_1_pins[] = { AB9540_PIN_V3 }; +static const unsigned sysclkreq4_d_1_pins[] = { AB9540_PIN_T4 }; +static const unsigned sysclkreq6_d_1_pins[] = { AB9540_PIN_T5 }; +static const unsigned gpio10_d_1_pins[] = { AB9540_PIN_B18 }; +static const unsigned gpio11_d_1_pins[] = { AB9540_PIN_C18 }; +static const unsigned gpio13_d_1_pins[] = { AB9540_PIN_D18 }; +static const unsigned pwmout1_d_1_pins[] = { AB9540_PIN_B19 }; +static const unsigned pwmout2_d_1_pins[] = { AB9540_PIN_C19 }; +static const unsigned pwmout3_d_1_pins[] = { AB9540_PIN_D19 }; +/* audio data interface 1*/ +static const unsigned adi1_d_1_pins[] = { AB9540_PIN_R3, AB9540_PIN_T2, + AB9540_PIN_U2, AB9540_PIN_V2 }; +/* USBUICC */ +static const unsigned usbuicc_d_1_pins[] = { AB9540_PIN_N17, AB9540_PIN_N16, + AB9540_PIN_M19 }; +static const unsigned sysclkreq7_d_1_pins[] = { AB9540_PIN_T3 }; +static const unsigned sysclkreq8_d_1_pins[] = { AB9540_PIN_W2 }; +/* Digital microphone 1 and 2 */ +static const unsigned dmic12_d_1_pins[] = { AB9540_PIN_H4, AB9540_PIN_F1 }; +/* Digital microphone 3 and 4 */ +static const unsigned dmic34_d_1_pins[] = { AB9540_PIN_F4, AB9540_PIN_F2 }; +/* Digital microphone 5 and 6 */ +static const unsigned dmic56_d_1_pins[] = { AB9540_PIN_E4, AB9540_PIN_F3 }; +static const unsigned extcpena_d_1_pins[] = { AB9540_PIN_J13 }; +/* modem SDA/SCL */ +static const unsigned modsclsda_d_1_pins[] = { AB9540_PIN_L17, AB9540_PIN_L16 }; +static const unsigned sysclkreq5_d_1_pins[] = { AB9540_PIN_W3 }; +static const unsigned gpio50_d_1_pins[] = { AB9540_PIN_N4 }; +static const unsigned batremn_d_1_pins[] = { AB9540_PIN_G12 }; +static const unsigned resethw_d_1_pins[] = { AB9540_PIN_E17 }; +static const unsigned service_d_1_pins[] = { AB9540_PIN_D11 }; +static const unsigned gpio60_d_1_pins[] = { AB9540_PIN_M18 }; + +/* Altfunction A column */ +static const unsigned gpio1_a_1_pins[] = { AB9540_PIN_R4 }; +static const unsigned gpio2_a_1_pins[] = { AB9540_PIN_V3 }; +static const unsigned gpio3_a_1_pins[] = { AB9540_PIN_T4 }; +static const unsigned gpio4_a_1_pins[] = { AB9540_PIN_T5 }; +static const unsigned hiqclkena_a_1_pins[] = { AB9540_PIN_B18 }; +static const unsigned pdmclk_a_1_pins[] = { AB9540_PIN_C18 }; +static const unsigned uartdata_a_1_pins[] = { AB9540_PIN_D18, AB9540_PIN_N4 }; +static const unsigned gpio14_a_1_pins[] = { AB9540_PIN_B19 }; +static const unsigned gpio15_a_1_pins[] = { AB9540_PIN_C19 }; +static const unsigned gpio16_a_1_pins[] = { AB9540_PIN_D19 }; +static const unsigned gpio17_a_1_pins[] = { AB9540_PIN_R3 }; +static const unsigned gpio18_a_1_pins[] = { AB9540_PIN_T2 }; +static const unsigned gpio19_a_1_pins[] = { AB9540_PIN_U2 }; +static const unsigned gpio20_a_1_pins[] = { AB9540_PIN_V2 }; +static const unsigned gpio21_a_1_pins[] = { AB9540_PIN_N17 }; +static const unsigned gpio22_a_1_pins[] = { AB9540_PIN_N16 }; +static const unsigned gpio23_a_1_pins[] = { AB9540_PIN_M19 }; +static const unsigned gpio24_a_1_pins[] = { AB9540_PIN_T3 }; +static const unsigned gpio25_a_1_pins[] = { AB9540_PIN_W2 }; +static const unsigned gpio27_a_1_pins[] = { AB9540_PIN_H4 }; +static const unsigned gpio28_a_1_pins[] = { AB9540_PIN_F1 }; +static const unsigned gpio29_a_1_pins[] = { AB9540_PIN_F4 }; +static const unsigned gpio30_a_1_pins[] = { AB9540_PIN_F2 }; +static const unsigned gpio31_a_1_pins[] = { AB9540_PIN_E4 }; +static const unsigned gpio32_a_1_pins[] = { AB9540_PIN_F3 }; +static const unsigned gpio34_a_1_pins[] = { AB9540_PIN_J13 }; +static const unsigned gpio40_a_1_pins[] = { AB9540_PIN_L17 }; +static const unsigned gpio41_a_1_pins[] = { AB9540_PIN_L16 }; +static const unsigned gpio42_a_1_pins[] = { AB9540_PIN_W3 }; +static const unsigned gpio51_a_1_pins[] = { AB9540_PIN_G12 }; +static const unsigned gpio52_a_1_pins[] = { AB9540_PIN_E17 }; +static const unsigned gpio53_a_1_pins[] = { AB9540_PIN_D11 }; +static const unsigned usbuiccpd_a_1_pins[] = { AB9540_PIN_M18 }; + +/* Altfunction B colum */ +static const unsigned pdmdata_b_1_pins[] = { AB9540_PIN_B18 }; +static const unsigned pwmextvibra1_b_1_pins[] = { AB9540_PIN_D18 }; +static const unsigned pwmextvibra2_b_1_pins[] = { AB9540_PIN_N4 }; + +/* Altfunction C column */ +static const unsigned usbvdat_c_1_pins[] = { AB9540_PIN_D18 }; + +#define AB9540_PIN_GROUP(a, b) { .name = #a, .pins = a##_pins, \ + .npins = ARRAY_SIZE(a##_pins), .altsetting = b } + +static const struct abx500_pingroup ab9540_groups[] = { + /* default column */ + AB9540_PIN_GROUP(sysclkreq2_d_1, ABX500_DEFAULT), + AB9540_PIN_GROUP(sysclkreq3_d_1, ABX500_DEFAULT), + AB9540_PIN_GROUP(sysclkreq4_d_1, ABX500_DEFAULT), + AB9540_PIN_GROUP(sysclkreq6_d_1, ABX500_DEFAULT), + AB9540_PIN_GROUP(gpio10_d_1, ABX500_DEFAULT), + AB9540_PIN_GROUP(gpio11_d_1, ABX500_DEFAULT), + AB9540_PIN_GROUP(gpio13_d_1, ABX500_DEFAULT), + AB9540_PIN_GROUP(pwmout1_d_1, ABX500_DEFAULT), + AB9540_PIN_GROUP(pwmout2_d_1, ABX500_DEFAULT), + AB9540_PIN_GROUP(pwmout3_d_1, ABX500_DEFAULT), + AB9540_PIN_GROUP(adi1_d_1, ABX500_DEFAULT), + AB9540_PIN_GROUP(usbuicc_d_1, ABX500_DEFAULT), + AB9540_PIN_GROUP(sysclkreq7_d_1, ABX500_DEFAULT), + AB9540_PIN_GROUP(sysclkreq8_d_1, ABX500_DEFAULT), + AB9540_PIN_GROUP(dmic12_d_1, ABX500_DEFAULT), + AB9540_PIN_GROUP(dmic34_d_1, ABX500_DEFAULT), + AB9540_PIN_GROUP(dmic56_d_1, ABX500_DEFAULT), + AB9540_PIN_GROUP(extcpena_d_1, ABX500_DEFAULT), + AB9540_PIN_GROUP(modsclsda_d_1, ABX500_DEFAULT), + AB9540_PIN_GROUP(sysclkreq5_d_1, ABX500_DEFAULT), + AB9540_PIN_GROUP(gpio50_d_1, ABX500_DEFAULT), + AB9540_PIN_GROUP(batremn_d_1, ABX500_DEFAULT), + AB9540_PIN_GROUP(resethw_d_1, ABX500_DEFAULT), + AB9540_PIN_GROUP(service_d_1, ABX500_DEFAULT), + AB9540_PIN_GROUP(gpio60_d_1, ABX500_DEFAULT), + + /* Altfunction A column */ + AB9540_PIN_GROUP(gpio1_a_1, ABX500_ALT_A), + AB9540_PIN_GROUP(gpio2_a_1, ABX500_ALT_A), + AB9540_PIN_GROUP(gpio3_a_1, ABX500_ALT_A), + AB9540_PIN_GROUP(gpio4_a_1, ABX500_ALT_A), + AB9540_PIN_GROUP(hiqclkena_a_1, ABX500_ALT_A), + AB9540_PIN_GROUP(pdmclk_a_1, ABX500_ALT_A), + AB9540_PIN_GROUP(uartdata_a_1, ABX500_ALT_A), + AB9540_PIN_GROUP(gpio14_a_1, ABX500_ALT_A), + AB9540_PIN_GROUP(gpio15_a_1, ABX500_ALT_A), + AB9540_PIN_GROUP(gpio16_a_1, ABX500_ALT_A), + AB9540_PIN_GROUP(gpio17_a_1, ABX500_ALT_A), + AB9540_PIN_GROUP(gpio18_a_1, ABX500_ALT_A), + AB9540_PIN_GROUP(gpio19_a_1, ABX500_ALT_A), + AB9540_PIN_GROUP(gpio20_a_1, ABX500_ALT_A), + AB9540_PIN_GROUP(gpio21_a_1, ABX500_ALT_A), + AB9540_PIN_GROUP(gpio22_a_1, ABX500_ALT_A), + AB9540_PIN_GROUP(gpio23_a_1, ABX500_ALT_A), + AB9540_PIN_GROUP(gpio24_a_1, ABX500_ALT_A), + AB9540_PIN_GROUP(gpio25_a_1, ABX500_ALT_A), + AB9540_PIN_GROUP(gpio27_a_1, ABX500_ALT_A), + AB9540_PIN_GROUP(gpio28_a_1, ABX500_ALT_A), + AB9540_PIN_GROUP(gpio29_a_1, ABX500_ALT_A), + AB9540_PIN_GROUP(gpio30_a_1, ABX500_ALT_A), + AB9540_PIN_GROUP(gpio31_a_1, ABX500_ALT_A), + AB9540_PIN_GROUP(gpio32_a_1, ABX500_ALT_A), + AB9540_PIN_GROUP(gpio34_a_1, ABX500_ALT_A), + AB9540_PIN_GROUP(gpio40_a_1, ABX500_ALT_A), + AB9540_PIN_GROUP(gpio41_a_1, ABX500_ALT_A), + AB9540_PIN_GROUP(gpio42_a_1, ABX500_ALT_A), + AB9540_PIN_GROUP(gpio51_a_1, ABX500_ALT_A), + AB9540_PIN_GROUP(gpio52_a_1, ABX500_ALT_A), + AB9540_PIN_GROUP(gpio53_a_1, ABX500_ALT_A), + AB9540_PIN_GROUP(usbuiccpd_a_1, ABX500_ALT_A), + + /* Altfunction B column */ + AB9540_PIN_GROUP(pdmdata_b_1, ABX500_ALT_B), + AB9540_PIN_GROUP(pwmextvibra1_b_1, ABX500_ALT_B), + AB9540_PIN_GROUP(pwmextvibra2_b_1, ABX500_ALT_B), + + /* Altfunction C column */ + AB9540_PIN_GROUP(usbvdat_c_1, ABX500_ALT_C), +}; + +/* We use this macro to define the groups applicable to a function */ +#define AB9540_FUNC_GROUPS(a, b...) \ +static const char * const a##_groups[] = { b }; + +AB9540_FUNC_GROUPS(sysclkreq, "sysclkreq2_d_1", "sysclkreq3_d_1", + "sysclkreq4_d_1", "sysclkreq5_d_1", "sysclkreq6_d_1", + "sysclkreq7_d_1", "sysclkreq8_d_1"); +AB9540_FUNC_GROUPS(gpio, "gpio1_a_1", "gpio2_a_1", "gpio3_a_1", "gpio4_a_1", + "gpio10_d_1", "gpio11_d_1", "gpio13_d_1", "gpio14_a_1", + "gpio15_a_1", "gpio16_a_1", "gpio17_a_1", "gpio18_a_1", + "gpio19_a_1", "gpio20_a_1", "gpio21_a_1", "gpio22_a_1", + "gpio23_a_1", "gpio24_a_1", "gpio25_a_1", "gpio27_a_1", + "gpio28_a_1", "gpio29_a_1", "gpio30_a_1", "gpio31_a_1", + "gpio32_a_1", "gpio34_a_1", "gpio40_a_1", "gpio41_a_1", + "gpio42_a_1", "gpio50_d_1", "gpio51_a_1", "gpio52_a_1", + "gpio53_a_1", "gpio60_d_1"); +AB9540_FUNC_GROUPS(pwmout, "pwmout1_d_1", "pwmout2_d_1", "pwmout3_d_1"); +AB9540_FUNC_GROUPS(adi1, "adi1_d_1"); +AB9540_FUNC_GROUPS(usbuicc, "usbuicc_d_1", "usbuiccpd_a_1"); +AB9540_FUNC_GROUPS(dmic, "dmic12_d_1", "dmic34_d_1", "dmic56_d_1"); +AB9540_FUNC_GROUPS(extcpena, "extcpena_d_1"); +AB9540_FUNC_GROUPS(modsclsda, "modsclsda_d_1"); +AB9540_FUNC_GROUPS(batremn, "batremn_d_1"); +AB9540_FUNC_GROUPS(resethw, "resethw_d_1"); +AB9540_FUNC_GROUPS(service, "service_d_1"); +AB9540_FUNC_GROUPS(hiqclkena, "hiqclkena_a_1"); +AB9540_FUNC_GROUPS(pdm, "pdmdata_b_1", "pdmclk_a_1"); +AB9540_FUNC_GROUPS(uartdata, "uartdata_a_1"); +AB9540_FUNC_GROUPS(pwmextvibra, "pwmextvibra1_b_1", "pwmextvibra2_b_1"); +AB9540_FUNC_GROUPS(usbvdat, "usbvdat_c_1"); + +#define FUNCTION(fname) \ + { \ + .name = #fname, \ + .groups = fname##_groups, \ + .ngroups = ARRAY_SIZE(fname##_groups), \ + } + +static const struct abx500_function ab9540_functions[] = { + FUNCTION(sysclkreq), + FUNCTION(gpio), + FUNCTION(pwmout), + FUNCTION(adi1), + FUNCTION(usbuicc), + FUNCTION(dmic), + FUNCTION(extcpena), + FUNCTION(modsclsda), + FUNCTION(batremn), + FUNCTION(resethw), + FUNCTION(service), + FUNCTION(hiqclkena), + FUNCTION(pdm), + FUNCTION(uartdata), + FUNCTION(pwmextvibra), + FUNCTION(usbvdat), +}; + +/* + * this table translates what's is in the AB9540 specification regarding the + * balls alternate functions (as for DB, default, ALT_A, ALT_B and ALT_C). + * ALTERNATE_FUNCTIONS(GPIO_NUMBER, GPIOSEL bit, ALTERNATFUNC bit1, + * ALTERNATEFUNC bit2, ALTA val, ALTB val, ALTC val), + * + * example : + * + * ALTERNATE_FUNCTIONS(13, 4, 3, 4, 1, 0, 2), + * means that pin AB9540_PIN_D18 (pin 13) supports 4 mux (default/ALT_A, + * ALT_B and ALT_C), so GPIOSEL and ALTERNATFUNC registers are used to + * select the mux. ALTA, ALTB and ALTC val indicates values to write in + * ALTERNATFUNC register. We need to specifies these values as SOC + * designers didn't apply the same logic on how to select mux in the + * ABx500 family. + * + * As this pins supports at least ALT_B mux, default mux is + * selected by writing 1 in GPIOSEL bit : + * + * | GPIOSEL bit=4 | alternatfunc bit2=4 | alternatfunc bit1=3 + * default | 1 | 0 | 0 + * alt_A | 0 | 0 | 1 + * alt_B | 0 | 0 | 0 + * alt_C | 0 | 1 | 0 + * + * ALTERNATE_FUNCTIONS(1, 0, UNUSED, UNUSED), + * means that pin AB9540_PIN_R4 (pin 1) supports 2 mux, so only GPIOSEL + * register is used to select the mux. As this pins doesn't support at + * least ALT_B mux, default mux is by writing 0 in GPIOSEL bit : + * + * | GPIOSEL bit=0 | alternatfunc bit2= | alternatfunc bit1= + * default | 0 | 0 | 0 + * alt_A | 1 | 0 | 0 + */ + +struct alternate_functions ab9540alternate_functions[AB9540_GPIO_MAX_NUMBER + 1] = { + /* GPIOSEL1 - bits 4-7 are reserved */ + ALTERNATE_FUNCTIONS(0, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO0 */ + ALTERNATE_FUNCTIONS(1, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO1, altA controlled by bit 0 */ + ALTERNATE_FUNCTIONS(2, 1, UNUSED, UNUSED, 0, 0, 0), /* GPIO2, altA controlled by bit 1 */ + ALTERNATE_FUNCTIONS(3, 2, UNUSED, UNUSED, 0, 0, 0), /* GPIO3, altA controlled by bit 2*/ + ALTERNATE_FUNCTIONS(4, 3, UNUSED, UNUSED, 0, 0, 0), /* GPIO4, altA controlled by bit 3*/ + ALTERNATE_FUNCTIONS(5, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO5 */ + ALTERNATE_FUNCTIONS(6, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO6 */ + ALTERNATE_FUNCTIONS(7, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO7 */ + ALTERNATE_FUNCTIONS(8, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO8 */ + /* GPIOSEL2 - bits 0 and 3 are reserved */ + ALTERNATE_FUNCTIONS(9, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO9 */ + ALTERNATE_FUNCTIONS(10, 1, 0, UNUSED, 1, 0, 0), /* GPIO10, altA and altB controlled by bit 0 */ + ALTERNATE_FUNCTIONS(11, 2, UNUSED, UNUSED, 0, 0, 0), /* GPIO11, altA controlled by bit 1 */ + ALTERNATE_FUNCTIONS(12, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO12 */ + ALTERNATE_FUNCTIONS(13, 4, 3, 4, 1, 0, 2), /* GPIO13, altA altB and altC controlled by bit 3 and 4 */ + ALTERNATE_FUNCTIONS(14, 5, UNUSED, UNUSED, 0, 0, 0), /* GPIO14, altA controlled by bit 5 */ + ALTERNATE_FUNCTIONS(15, 6, UNUSED, UNUSED, 0, 0, 0), /* GPIO15, altA controlled by bit 6 */ + ALTERNATE_FUNCTIONS(16, 7, UNUSED, UNUSED, 0, 0, 0), /* GPIO16, altA controlled by bit 7 */ + /* GPIOSEL3 - bit 1-3 reserved + * pins 17 to 20 are special case, only bit 0 is used to select + * alternate function for these 4 pins. + * bits 1 to 3 are reserved + */ + ALTERNATE_FUNCTIONS(17, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO17, altA controlled by bit 0 */ + ALTERNATE_FUNCTIONS(18, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO18, altA controlled by bit 0 */ + ALTERNATE_FUNCTIONS(19, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO19, altA controlled by bit 0 */ + ALTERNATE_FUNCTIONS(20, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO20, altA controlled by bit 0 */ + ALTERNATE_FUNCTIONS(21, 4, UNUSED, UNUSED, 0, 0, 0), /* GPIO21, altA controlled by bit 4 */ + ALTERNATE_FUNCTIONS(22, 5, UNUSED, UNUSED, 0, 0, 0), /* GPIO22, altA controlled by bit 5 */ + ALTERNATE_FUNCTIONS(23, 6, UNUSED, UNUSED, 0, 0, 0), /* GPIO23, altA controlled by bit 6 */ + ALTERNATE_FUNCTIONS(24, 7, UNUSED, UNUSED, 0, 0, 0), /* GPIO24, altA controlled by bit 7 */ + /* GPIOSEL4 - bit 1 reserved */ + ALTERNATE_FUNCTIONS(25, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO25, altA controlled by bit 0 */ + ALTERNATE_FUNCTIONS(26, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO26 */ + ALTERNATE_FUNCTIONS(27, 2, UNUSED, UNUSED, 0, 0, 0), /* GPIO27, altA controlled by bit 2 */ + ALTERNATE_FUNCTIONS(28, 3, UNUSED, UNUSED, 0, 0, 0), /* GPIO28, altA controlled by bit 3 */ + ALTERNATE_FUNCTIONS(29, 4, UNUSED, UNUSED, 0, 0, 0), /* GPIO29, altA controlled by bit 4 */ + ALTERNATE_FUNCTIONS(30, 5, UNUSED, UNUSED, 0, 0, 0), /* GPIO30, altA controlled by bit 5 */ + ALTERNATE_FUNCTIONS(31, 6, UNUSED, UNUSED, 0, 0, 0), /* GPIO31, altA controlled by bit 6 */ + ALTERNATE_FUNCTIONS(32, 7, UNUSED, UNUSED, 0, 0, 0), /* GPIO32, altA controlled by bit 7 */ + /* GPIOSEL5 - bit 0, 2-6 are reserved */ + ALTERNATE_FUNCTIONS(33, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO33 */ + ALTERNATE_FUNCTIONS(34, 1, UNUSED, UNUSED, 0, 0, 0), /* GPIO34, altA controlled by bit 1 */ + ALTERNATE_FUNCTIONS(35, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO35 */ + ALTERNATE_FUNCTIONS(36, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO36 */ + ALTERNATE_FUNCTIONS(37, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO37 */ + ALTERNATE_FUNCTIONS(38, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO38 */ + ALTERNATE_FUNCTIONS(39, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO39 */ + ALTERNATE_FUNCTIONS(40, 7, UNUSED, UNUSED, 0, 0, 0), /* GPIO40, altA controlled by bit 7 */ + /* GPIOSEL6 - bit 2-7 are reserved */ + ALTERNATE_FUNCTIONS(41, 0, UNUSED, UNUSED, 0, 0, 0), /* GPIO41, altA controlled by bit 0 */ + ALTERNATE_FUNCTIONS(42, 1, UNUSED, UNUSED, 0, 0, 0), /* GPIO42, altA controlled by bit 1 */ + ALTERNATE_FUNCTIONS(43, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO43 */ + ALTERNATE_FUNCTIONS(44, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO44 */ + ALTERNATE_FUNCTIONS(45, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO45 */ + ALTERNATE_FUNCTIONS(46, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO46 */ + ALTERNATE_FUNCTIONS(47, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO47 */ + ALTERNATE_FUNCTIONS(48, UNUSED, UNUSED, UNUSED, 0, 0, 0), /* no GPIO48 */ + /* + * GPIOSEL7 - bit 0 and 6-7 are reserved + * special case with GPIO60, wich is located at offset 5 of gpiosel7 + * don't know why it has been called GPIO60 in AB9540 datasheet, + * GPIO54 would be logical..., so at SOC point of view we consider + * GPIO60 = GPIO54 + */ + ALTERNATE_FUNCTIONS(49, 0, UNUSED, UNUSED, 0, 0, 0), /* no GPIO49 */ + ALTERNATE_FUNCTIONS(50, 1, 2, UNUSED, 1, 0, 0), /* GPIO50, altA and altB controlled by bit 1 */ + ALTERNATE_FUNCTIONS(51, 2, UNUSED, UNUSED, 0, 0, 0), /* GPIO51, altA controlled by bit 2 */ + ALTERNATE_FUNCTIONS(52, 3, UNUSED, UNUSED, 0, 0, 0), /* GPIO52, altA controlled by bit 3 */ + ALTERNATE_FUNCTIONS(53, 4, UNUSED, UNUSED, 0, 0, 0), /* GPIO53, altA controlled by bit 4 */ + ALTERNATE_FUNCTIONS(54, 5, UNUSED, UNUSED, 0, 0, 0), /* GPIO54 = GPIO60, altA controlled by bit 5 */ +}; + +struct abx500_gpio_irq_cluster ab9540_gpio_irq_cluster[] = { + GPIO_IRQ_CLUSTER(10, 13, AB8500_INT_GPIO10R), + GPIO_IRQ_CLUSTER(24, 25, AB8500_INT_GPIO24R), + GPIO_IRQ_CLUSTER(40, 41, AB8500_INT_GPIO40R), + GPIO_IRQ_CLUSTER(50, 54, AB9540_INT_GPIO50R), +}; + +static struct abx500_pinctrl_soc_data ab9540_soc = { + .gpio_ranges = ab9540_pinranges, + .gpio_num_ranges = ARRAY_SIZE(ab9540_pinranges), + .pins = ab9540_pins, + .npins = ARRAY_SIZE(ab9540_pins), + .functions = ab9540_functions, + .nfunctions = ARRAY_SIZE(ab9540_functions), + .groups = ab9540_groups, + .ngroups = ARRAY_SIZE(ab9540_groups), + .alternate_functions = ab9540alternate_functions, + .gpio_irq_cluster = ab9540_gpio_irq_cluster, + .ngpio_irq_cluster = ARRAY_SIZE(ab9540_gpio_irq_cluster), + .irq_gpio_rising_offset = AB8500_INT_GPIO6R, + .irq_gpio_falling_offset = AB8500_INT_GPIO6F, + .irq_gpio_factor = 1, +}; + +void +abx500_pinctrl_ab9540_init(struct abx500_pinctrl_soc_data **soc) +{ + *soc = &ab9540_soc; +} diff --git a/drivers/pinctrl/pinctrl-abx500.c b/drivers/pinctrl/pinctrl-abx500.c new file mode 100644 index 000000000000..caecdd373061 --- /dev/null +++ b/drivers/pinctrl/pinctrl-abx500.c @@ -0,0 +1,1012 @@ +/* + * Copyright (C) ST-Ericsson SA 2013 + * + * Author: Patrice Chotard <patrice.chotard@st.com> + * License terms: GNU General Public License (GPL) version 2 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/slab.h> +#include <linux/init.h> +#include <linux/module.h> +#include <linux/err.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/gpio.h> +#include <linux/irq.h> +#include <linux/irqdomain.h> +#include <linux/interrupt.h> +#include <linux/bitops.h> +#include <linux/mfd/abx500.h> +#include <linux/mfd/abx500/ab8500.h> +#include <linux/mfd/abx500/ab8500-gpio.h> +#include <linux/pinctrl/pinctrl.h> +#include <linux/pinctrl/consumer.h> +#include <linux/pinctrl/pinmux.h> +#include <linux/pinctrl/pinconf.h> +#include <linux/pinctrl/pinconf-generic.h> + +#include "pinctrl-abx500.h" + +/* + * The AB9540 and AB8540 GPIO support are extended versions + * of the AB8500 GPIO support. + * The AB9540 supports an additional (7th) register so that + * more GPIO may be configured and used. + * The AB8540 supports 4 new gpios (GPIOx_VBAT) that have + * internal pull-up and pull-down capabilities. + */ + +/* + * GPIO registers offset + * Bank: 0x10 + */ +#define AB8500_GPIO_SEL1_REG 0x00 +#define AB8500_GPIO_SEL2_REG 0x01 +#define AB8500_GPIO_SEL3_REG 0x02 +#define AB8500_GPIO_SEL4_REG 0x03 +#define AB8500_GPIO_SEL5_REG 0x04 +#define AB8500_GPIO_SEL6_REG 0x05 +#define AB9540_GPIO_SEL7_REG 0x06 + +#define AB8500_GPIO_DIR1_REG 0x10 +#define AB8500_GPIO_DIR2_REG 0x11 +#define AB8500_GPIO_DIR3_REG 0x12 +#define AB8500_GPIO_DIR4_REG 0x13 +#define AB8500_GPIO_DIR5_REG 0x14 +#define AB8500_GPIO_DIR6_REG 0x15 +#define AB9540_GPIO_DIR7_REG 0x16 + +#define AB8500_GPIO_OUT1_REG 0x20 +#define AB8500_GPIO_OUT2_REG 0x21 +#define AB8500_GPIO_OUT3_REG 0x22 +#define AB8500_GPIO_OUT4_REG 0x23 +#define AB8500_GPIO_OUT5_REG 0x24 +#define AB8500_GPIO_OUT6_REG 0x25 +#define AB9540_GPIO_OUT7_REG 0x26 + +#define AB8500_GPIO_PUD1_REG 0x30 +#define AB8500_GPIO_PUD2_REG 0x31 +#define AB8500_GPIO_PUD3_REG 0x32 +#define AB8500_GPIO_PUD4_REG 0x33 +#define AB8500_GPIO_PUD5_REG 0x34 +#define AB8500_GPIO_PUD6_REG 0x35 +#define AB9540_GPIO_PUD7_REG 0x36 + +#define AB8500_GPIO_IN1_REG 0x40 +#define AB8500_GPIO_IN2_REG 0x41 +#define AB8500_GPIO_IN3_REG 0x42 +#define AB8500_GPIO_IN4_REG 0x43 +#define AB8500_GPIO_IN5_REG 0x44 +#define AB8500_GPIO_IN6_REG 0x45 +#define AB9540_GPIO_IN7_REG 0x46 +#define AB8540_GPIO_VINSEL_REG 0x47 +#define AB8540_GPIO_PULL_UPDOWN_REG 0x48 +#define AB8500_GPIO_ALTFUN_REG 0x50 +#define AB8540_GPIO_PULL_UPDOWN_MASK 0x03 +#define AB8540_GPIO_VINSEL_MASK 0x03 +#define AB8540_GPIOX_VBAT_START 51 +#define AB8540_GPIOX_VBAT_END 54 + +struct abx500_pinctrl { + struct device *dev; + struct pinctrl_dev *pctldev; + struct abx500_pinctrl_soc_data *soc; + struct gpio_chip chip; + struct ab8500 *parent; + struct mutex lock; + struct abx500_gpio_irq_cluster *irq_cluster; + int irq_cluster_size; +}; + +/** + * to_abx500_pinctrl() - get the pointer to abx500_pinctrl + * @chip: Member of the structure abx500_pinctrl + */ +static inline struct abx500_pinctrl *to_abx500_pinctrl(struct gpio_chip *chip) +{ + return container_of(chip, struct abx500_pinctrl, chip); +} + +static int abx500_gpio_get_bit(struct gpio_chip *chip, u8 reg, + unsigned offset, bool *bit) +{ + struct abx500_pinctrl *pct = to_abx500_pinctrl(chip); + u8 pos = offset % 8; + u8 val; + int ret; + + reg += offset / 8; + ret = abx500_get_register_interruptible(pct->dev, + AB8500_MISC, reg, &val); + + *bit = !!(val & BIT(pos)); + + if (ret < 0) + dev_err(pct->dev, + "%s read reg =%x, offset=%x failed\n", + __func__, reg, offset); + + return ret; +} + +static int abx500_gpio_set_bits(struct gpio_chip *chip, u8 reg, + unsigned offset, int val) +{ + struct abx500_pinctrl *pct = to_abx500_pinctrl(chip); + u8 pos = offset % 8; + int ret; + + reg += offset / 8; + ret = abx500_mask_and_set_register_interruptible(pct->dev, + AB8500_MISC, reg, BIT(pos), val << pos); + if (ret < 0) + dev_err(pct->dev, "%s write failed\n", __func__); + + return ret; +} + +/** + * abx500_gpio_get() - Get the particular GPIO value + * @chip: Gpio device + * @offset: GPIO number to read + */ +static int abx500_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct abx500_pinctrl *pct = to_abx500_pinctrl(chip); + bool bit; + int ret; + + ret = abx500_gpio_get_bit(chip, AB8500_GPIO_IN1_REG, + offset, &bit); + if (ret < 0) { + dev_err(pct->dev, "%s failed\n", __func__); + return ret; + } + + return bit; +} + +static void abx500_gpio_set(struct gpio_chip *chip, unsigned offset, int val) +{ + struct abx500_pinctrl *pct = to_abx500_pinctrl(chip); + int ret; + + ret = abx500_gpio_set_bits(chip, AB8500_GPIO_OUT1_REG, offset, val); + if (ret < 0) + dev_err(pct->dev, "%s write failed\n", __func__); +} + +static int abx500_config_pull_updown(struct abx500_pinctrl *pct, + int offset, enum abx500_gpio_pull_updown val) +{ + u8 pos; + int ret; + struct pullud *pullud; + + if (!pct->soc->pullud) { + dev_err(pct->dev, "%s AB chip doesn't support pull up/down feature", + __func__); + ret = -EPERM; + goto out; + } + + pullud = pct->soc->pullud; + + if ((offset < pullud->first_pin) + || (offset > pullud->last_pin)) { + ret = -EINVAL; + goto out; + } + + pos = offset << 1; + + ret = abx500_mask_and_set_register_interruptible(pct->dev, + AB8500_MISC, AB8540_GPIO_PULL_UPDOWN_REG, + AB8540_GPIO_PULL_UPDOWN_MASK << pos, val << pos); + +out: + if (ret < 0) + dev_err(pct->dev, "%s failed (%d)\n", __func__, ret); + + return ret; +} + +static int abx500_gpio_direction_output(struct gpio_chip *chip, + unsigned offset, + int val) +{ + struct abx500_pinctrl *pct = to_abx500_pinctrl(chip); + struct pullud *pullud = pct->soc->pullud; + unsigned gpio; + int ret; + + /* set direction as output */ + ret = abx500_gpio_set_bits(chip, AB8500_GPIO_DIR1_REG, offset, 1); + if (ret < 0) + return ret; + + /* disable pull down */ + ret = abx500_gpio_set_bits(chip, AB8500_GPIO_PUD1_REG, offset, 1); + if (ret < 0) + return ret; + + /* if supported, disable both pull down and pull up */ + gpio = offset + 1; + if (pullud && gpio >= pullud->first_pin && gpio <= pullud->last_pin) { + ret = abx500_config_pull_updown(pct, + gpio, + ABX500_GPIO_PULL_NONE); + if (ret < 0) + return ret; + } + + /* set the output as 1 or 0 */ + return abx500_gpio_set_bits(chip, AB8500_GPIO_OUT1_REG, offset, val); +} + +static int abx500_gpio_direction_input(struct gpio_chip *chip, unsigned offset) +{ + /* set the register as input */ + return abx500_gpio_set_bits(chip, AB8500_GPIO_DIR1_REG, offset, 0); +} + +static int abx500_gpio_to_irq(struct gpio_chip *chip, unsigned offset) +{ + struct abx500_pinctrl *pct = to_abx500_pinctrl(chip); + /* The AB8500 GPIO numbers are off by one */ + int gpio = offset + 1; + int hwirq; + int i; + + for (i = 0; i < pct->irq_cluster_size; i++) { + struct abx500_gpio_irq_cluster *cluster = + &pct->irq_cluster[i]; + + if (gpio >= cluster->start && gpio <= cluster->end) { + /* + * The ABx500 GPIO's associated IRQs are clustered together + * throughout the interrupt numbers at irregular intervals. + * To solve this quandry, we have placed the read-in values + * into the cluster information table. + */ + hwirq = gpio - cluster->start + cluster->to_irq; + return irq_create_mapping(pct->parent->domain, hwirq); + } + } + + return -EINVAL; +} + +static int abx500_set_mode(struct pinctrl_dev *pctldev, struct gpio_chip *chip, + unsigned gpio, int alt_setting) +{ + struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev); + struct alternate_functions af = pct->soc->alternate_functions[gpio]; + int ret; + int val; + unsigned offset; + + const char *modes[] = { + [ABX500_DEFAULT] = "default", + [ABX500_ALT_A] = "altA", + [ABX500_ALT_B] = "altB", + [ABX500_ALT_C] = "altC", + }; + + /* sanity check */ + if (((alt_setting == ABX500_ALT_A) && (af.gpiosel_bit == UNUSED)) || + ((alt_setting == ABX500_ALT_B) && (af.alt_bit1 == UNUSED)) || + ((alt_setting == ABX500_ALT_C) && (af.alt_bit2 == UNUSED))) { + dev_dbg(pct->dev, "pin %d doesn't support %s mode\n", gpio, + modes[alt_setting]); + return -EINVAL; + } + + /* on ABx5xx, there is no GPIO0, so adjust the offset */ + offset = gpio - 1; + + switch (alt_setting) { + case ABX500_DEFAULT: + /* + * for ABx5xx family, default mode is always selected by + * writing 0 to GPIOSELx register, except for pins which + * support at least ALT_B mode, default mode is selected + * by writing 1 to GPIOSELx register + */ + val = 0; + if (af.alt_bit1 != UNUSED) + val++; + + ret = abx500_gpio_set_bits(chip, AB8500_GPIO_SEL1_REG, + offset, val); + break; + + case ABX500_ALT_A: + /* + * for ABx5xx family, alt_a mode is always selected by + * writing 1 to GPIOSELx register, except for pins which + * support at least ALT_B mode, alt_a mode is selected + * by writing 0 to GPIOSELx register and 0 in ALTFUNC + * register + */ + if (af.alt_bit1 != UNUSED) { + ret = abx500_gpio_set_bits(chip, AB8500_GPIO_SEL1_REG, + offset, 0); + ret = abx500_gpio_set_bits(chip, + AB8500_GPIO_ALTFUN_REG, + af.alt_bit1, + !!(af.alta_val && BIT(0))); + if (af.alt_bit2 != UNUSED) + ret = abx500_gpio_set_bits(chip, + AB8500_GPIO_ALTFUN_REG, + af.alt_bit2, + !!(af.alta_val && BIT(1))); + } else + ret = abx500_gpio_set_bits(chip, AB8500_GPIO_SEL1_REG, + offset, 1); + break; + + case ABX500_ALT_B: + ret = abx500_gpio_set_bits(chip, AB8500_GPIO_SEL1_REG, + offset, 0); + ret = abx500_gpio_set_bits(chip, AB8500_GPIO_ALTFUN_REG, + af.alt_bit1, !!(af.altb_val && BIT(0))); + if (af.alt_bit2 != UNUSED) + ret = abx500_gpio_set_bits(chip, + AB8500_GPIO_ALTFUN_REG, + af.alt_bit2, + !!(af.altb_val && BIT(1))); + break; + + case ABX500_ALT_C: + ret = abx500_gpio_set_bits(chip, AB8500_GPIO_SEL1_REG, + offset, 0); + ret = abx500_gpio_set_bits(chip, AB8500_GPIO_ALTFUN_REG, + af.alt_bit2, !!(af.altc_val && BIT(0))); + ret = abx500_gpio_set_bits(chip, AB8500_GPIO_ALTFUN_REG, + af.alt_bit2, !!(af.altc_val && BIT(1))); + break; + + default: + dev_dbg(pct->dev, "unknow alt_setting %d\n", alt_setting); + + return -EINVAL; + } + + return ret; +} + +static u8 abx500_get_mode(struct pinctrl_dev *pctldev, struct gpio_chip *chip, + unsigned gpio) +{ + u8 mode; + bool bit_mode; + bool alt_bit1; + bool alt_bit2; + struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev); + struct alternate_functions af = pct->soc->alternate_functions[gpio]; + /* on ABx5xx, there is no GPIO0, so adjust the offset */ + unsigned offset = gpio - 1; + + /* + * if gpiosel_bit is set to unused, + * it means no GPIO or special case + */ + if (af.gpiosel_bit == UNUSED) + return ABX500_DEFAULT; + + /* read GpioSelx register */ + abx500_gpio_get_bit(chip, AB8500_GPIO_SEL1_REG + (offset / 8), + af.gpiosel_bit, &bit_mode); + mode = bit_mode; + + /* sanity check */ + if ((af.alt_bit1 < UNUSED) || (af.alt_bit1 > 7) || + (af.alt_bit2 < UNUSED) || (af.alt_bit2 > 7)) { + dev_err(pct->dev, + "alt_bitX value not in correct range (-1 to 7)\n"); + return -EINVAL; + } + + /* if alt_bit2 is used, alt_bit1 must be used too */ + if ((af.alt_bit2 != UNUSED) && (af.alt_bit1 == UNUSED)) { + dev_err(pct->dev, + "if alt_bit2 is used, alt_bit1 can't be unused\n"); + return -EINVAL; + } + + /* check if pin use AlternateFunction register */ + if ((af.alt_bit1 == UNUSED) && (af.alt_bit1 == UNUSED)) + return mode; + /* + * if pin GPIOSEL bit is set and pin supports alternate function, + * it means DEFAULT mode + */ + if (mode) + return ABX500_DEFAULT; + + /* + * pin use the AlternatFunction register + * read alt_bit1 value + */ + abx500_gpio_get_bit(chip, AB8500_GPIO_ALTFUN_REG, + af.alt_bit1, &alt_bit1); + + if (af.alt_bit2 != UNUSED) + /* read alt_bit2 value */ + abx500_gpio_get_bit(chip, AB8500_GPIO_ALTFUN_REG, af.alt_bit2, + &alt_bit2); + else + alt_bit2 = 0; + + mode = (alt_bit2 << 1) + alt_bit1; + if (mode == af.alta_val) + return ABX500_ALT_A; + else if (mode == af.altb_val) + return ABX500_ALT_B; + else + return ABX500_ALT_C; +} + +#ifdef CONFIG_DEBUG_FS + +#include <linux/seq_file.h> + +static void abx500_gpio_dbg_show_one(struct seq_file *s, + struct pinctrl_dev *pctldev, + struct gpio_chip *chip, + unsigned offset, unsigned gpio) +{ + const char *label = gpiochip_is_requested(chip, offset - 1); + u8 gpio_offset = offset - 1; + int mode = -1; + bool is_out; + bool pull; + + const char *modes[] = { + [ABX500_DEFAULT] = "default", + [ABX500_ALT_A] = "altA", + [ABX500_ALT_B] = "altB", + [ABX500_ALT_C] = "altC", + }; + + abx500_gpio_get_bit(chip, AB8500_GPIO_DIR1_REG, gpio_offset, &is_out); + abx500_gpio_get_bit(chip, AB8500_GPIO_PUD1_REG, gpio_offset, &pull); + + if (pctldev) + mode = abx500_get_mode(pctldev, chip, offset); + + seq_printf(s, " gpio-%-3d (%-20.20s) %-3s %-9s %s", + gpio, label ?: "(none)", + is_out ? "out" : "in ", + is_out ? + (chip->get + ? (chip->get(chip, offset) ? "hi" : "lo") + : "? ") + : (pull ? "pull up" : "pull down"), + (mode < 0) ? "unknown" : modes[mode]); +} + +static void abx500_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip) +{ + unsigned i; + unsigned gpio = chip->base; + struct abx500_pinctrl *pct = to_abx500_pinctrl(chip); + struct pinctrl_dev *pctldev = pct->pctldev; + + for (i = 0; i < chip->ngpio; i++, gpio++) { + /* On AB8500, there is no GPIO0, the first is the GPIO 1 */ + abx500_gpio_dbg_show_one(s, pctldev, chip, i + 1, gpio); + seq_printf(s, "\n"); + } +} + +#else +static inline void abx500_gpio_dbg_show_one(struct seq_file *s, + struct pinctrl_dev *pctldev, + struct gpio_chip *chip, + unsigned offset, unsigned gpio) +{ +} +#define abx500_gpio_dbg_show NULL +#endif + +int abx500_gpio_request(struct gpio_chip *chip, unsigned offset) +{ + int gpio = chip->base + offset; + + return pinctrl_request_gpio(gpio); +} + +void abx500_gpio_free(struct gpio_chip *chip, unsigned offset) +{ + int gpio = chip->base + offset; + + pinctrl_free_gpio(gpio); +} + +static struct gpio_chip abx500gpio_chip = { + .label = "abx500-gpio", + .owner = THIS_MODULE, + .request = abx500_gpio_request, + .free = abx500_gpio_free, + .direction_input = abx500_gpio_direction_input, + .get = abx500_gpio_get, + .direction_output = abx500_gpio_direction_output, + .set = abx500_gpio_set, + .to_irq = abx500_gpio_to_irq, + .dbg_show = abx500_gpio_dbg_show, +}; + +static int abx500_pmx_get_funcs_cnt(struct pinctrl_dev *pctldev) +{ + struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev); + + return pct->soc->nfunctions; +} + +static const char *abx500_pmx_get_func_name(struct pinctrl_dev *pctldev, + unsigned function) +{ + struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev); + + return pct->soc->functions[function].name; +} + +static int abx500_pmx_get_func_groups(struct pinctrl_dev *pctldev, + unsigned function, + const char * const **groups, + unsigned * const num_groups) +{ + struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev); + + *groups = pct->soc->functions[function].groups; + *num_groups = pct->soc->functions[function].ngroups; + + return 0; +} + +static int abx500_pmx_enable(struct pinctrl_dev *pctldev, unsigned function, + unsigned group) +{ + struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev); + struct gpio_chip *chip = &pct->chip; + const struct abx500_pingroup *g; + int i; + int ret = 0; + + g = &pct->soc->groups[group]; + if (g->altsetting < 0) + return -EINVAL; + + dev_dbg(pct->dev, "enable group %s, %u pins\n", g->name, g->npins); + + for (i = 0; i < g->npins; i++) { + dev_dbg(pct->dev, "setting pin %d to altsetting %d\n", + g->pins[i], g->altsetting); + + ret = abx500_set_mode(pctldev, chip, g->pins[i], g->altsetting); + } + + return ret; +} + +static void abx500_pmx_disable(struct pinctrl_dev *pctldev, + unsigned function, unsigned group) +{ + struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev); + const struct abx500_pingroup *g; + + g = &pct->soc->groups[group]; + if (g->altsetting < 0) + return; + + /* FIXME: poke out the mux, set the pin to some default state? */ + dev_dbg(pct->dev, "disable group %s, %u pins\n", g->name, g->npins); +} + +int abx500_gpio_request_enable(struct pinctrl_dev *pctldev, + struct pinctrl_gpio_range *range, + unsigned offset) +{ + struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev); + const struct abx500_pinrange *p; + int ret; + int i; + + /* + * Different ranges have different ways to enable GPIO function on a + * pin, so refer back to our local range type, where we handily define + * what altfunc enables GPIO for a certain pin. + */ + for (i = 0; i < pct->soc->gpio_num_ranges; i++) { + p = &pct->soc->gpio_ranges[i]; + if ((offset >= p->offset) && + (offset < (p->offset + p->npins))) + break; + } + + if (i == pct->soc->gpio_num_ranges) { + dev_err(pct->dev, "%s failed to locate range\n", __func__); + return -ENODEV; + } + + dev_dbg(pct->dev, "enable GPIO by altfunc %d at gpio %d\n", + p->altfunc, offset); + + ret = abx500_set_mode(pct->pctldev, &pct->chip, + offset, p->altfunc); + if (ret < 0) { + dev_err(pct->dev, "%s setting altfunc failed\n", __func__); + return ret; + } + + return ret; +} + +static void abx500_gpio_disable_free(struct pinctrl_dev *pctldev, + struct pinctrl_gpio_range *range, + unsigned offset) +{ +} + +static struct pinmux_ops abx500_pinmux_ops = { + .get_functions_count = abx500_pmx_get_funcs_cnt, + .get_function_name = abx500_pmx_get_func_name, + .get_function_groups = abx500_pmx_get_func_groups, + .enable = abx500_pmx_enable, + .disable = abx500_pmx_disable, + .gpio_request_enable = abx500_gpio_request_enable, + .gpio_disable_free = abx500_gpio_disable_free, +}; + +static int abx500_get_groups_cnt(struct pinctrl_dev *pctldev) +{ + struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev); + + return pct->soc->ngroups; +} + +static const char *abx500_get_group_name(struct pinctrl_dev *pctldev, + unsigned selector) +{ + struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev); + + return pct->soc->groups[selector].name; +} + +static int abx500_get_group_pins(struct pinctrl_dev *pctldev, + unsigned selector, + const unsigned **pins, + unsigned *num_pins) +{ + struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev); + + *pins = pct->soc->groups[selector].pins; + *num_pins = pct->soc->groups[selector].npins; + + return 0; +} + +static void abx500_pin_dbg_show(struct pinctrl_dev *pctldev, + struct seq_file *s, unsigned offset) +{ + struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev); + struct gpio_chip *chip = &pct->chip; + + abx500_gpio_dbg_show_one(s, pctldev, chip, offset, + chip->base + offset - 1); +} + +static struct pinctrl_ops abx500_pinctrl_ops = { + .get_groups_count = abx500_get_groups_cnt, + .get_group_name = abx500_get_group_name, + .get_group_pins = abx500_get_group_pins, + .pin_dbg_show = abx500_pin_dbg_show, +}; + +int abx500_pin_config_get(struct pinctrl_dev *pctldev, + unsigned pin, + unsigned long *config) +{ + return -ENOSYS; +} + +int abx500_pin_config_set(struct pinctrl_dev *pctldev, + unsigned pin, + unsigned long config) +{ + struct abx500_pinctrl *pct = pinctrl_dev_get_drvdata(pctldev); + struct pullud *pullud = pct->soc->pullud; + struct gpio_chip *chip = &pct->chip; + unsigned offset; + int ret; + enum pin_config_param param = pinconf_to_config_param(config); + enum pin_config_param argument = pinconf_to_config_argument(config); + + dev_dbg(chip->dev, "pin %d [%#lx]: %s %s\n", + pin, config, (param == PIN_CONFIG_OUTPUT) ? "output " : "input", + (param == PIN_CONFIG_OUTPUT) ? (argument ? "high" : "low") : + (argument ? "pull up" : "pull down")); + + /* on ABx500, there is no GPIO0, so adjust the offset */ + offset = pin - 1; + + switch (param) { + case PIN_CONFIG_BIAS_PULL_DOWN: + /* + * if argument = 1 set the pull down + * else clear the pull down + */ + ret = abx500_gpio_direction_input(chip, offset); + /* + * Some chips only support pull down, while some actually + * support both pull up and pull down. Such chips have + * a "pullud" range specified for the pins that support + * both features. If the pin is not within that range, we + * fall back to the old bit set that only support pull down. + */ + if (pullud && + pin >= pullud->first_pin && + pin <= pullud->last_pin) + ret = abx500_config_pull_updown(pct, + pin, + argument ? ABX500_GPIO_PULL_DOWN : ABX500_GPIO_PULL_NONE); + else + /* Chip only supports pull down */ + ret = abx500_gpio_set_bits(chip, AB8500_GPIO_PUD1_REG, + offset, argument ? 0 : 1); + break; + + case PIN_CONFIG_OUTPUT: + ret = abx500_gpio_direction_output(chip, offset, argument); + + break; + + default: + dev_err(chip->dev, "illegal configuration requested\n"); + + return -EINVAL; + } + + return ret; +} + +static struct pinconf_ops abx500_pinconf_ops = { + .pin_config_get = abx500_pin_config_get, + .pin_config_set = abx500_pin_config_set, +}; + +static struct pinctrl_desc abx500_pinctrl_desc = { + .name = "pinctrl-abx500", + .pctlops = &abx500_pinctrl_ops, + .pmxops = &abx500_pinmux_ops, + .confops = &abx500_pinconf_ops, + .owner = THIS_MODULE, +}; + +static int abx500_get_gpio_num(struct abx500_pinctrl_soc_data *soc) +{ + unsigned int lowest = 0; + unsigned int highest = 0; + unsigned int npins = 0; + int i; + + /* + * Compute number of GPIOs from the last SoC gpio range descriptors + * These ranges may include "holes" but the GPIO number space shall + * still be homogeneous, so we need to detect and account for any + * such holes so that these are included in the number of GPIO pins. + */ + for (i = 0; i < soc->gpio_num_ranges; i++) { + unsigned gstart; + unsigned gend; + const struct abx500_pinrange *p; + + p = &soc->gpio_ranges[i]; + gstart = p->offset; + gend = p->offset + p->npins - 1; + + if (i == 0) { + /* First iteration, set start values */ + lowest = gstart; + highest = gend; + } else { + if (gstart < lowest) + lowest = gstart; + if (gend > highest) + highest = gend; + } + } + /* this gives the absolute number of pins */ + npins = highest - lowest + 1; + return npins; +} + +static const struct of_device_id abx500_gpio_match[] = { + { .compatible = "stericsson,ab8500-gpio", .data = (void *)PINCTRL_AB8500, }, + { .compatible = "stericsson,ab8505-gpio", .data = (void *)PINCTRL_AB8505, }, + { .compatible = "stericsson,ab8540-gpio", .data = (void *)PINCTRL_AB8540, }, + { .compatible = "stericsson,ab9540-gpio", .data = (void *)PINCTRL_AB9540, }, +}; + +static int abx500_gpio_probe(struct platform_device *pdev) +{ + struct ab8500_platform_data *abx500_pdata = + dev_get_platdata(pdev->dev.parent); + struct abx500_gpio_platform_data *pdata = NULL; + struct device_node *np = pdev->dev.of_node; + struct abx500_pinctrl *pct; + const struct platform_device_id *platid = platform_get_device_id(pdev); + unsigned int id = -1; + int ret, err; + int i; + + if (abx500_pdata) + pdata = abx500_pdata->gpio; + if (!pdata) { + if (np) { + const struct of_device_id *match; + + match = of_match_device(abx500_gpio_match, &pdev->dev); + if (!match) + return -ENODEV; + id = (unsigned long)match->data; + } else { + dev_err(&pdev->dev, "gpio dt and platform data missing\n"); + return -ENODEV; + } + } + + if (platid) + id = platid->driver_data; + + pct = devm_kzalloc(&pdev->dev, sizeof(struct abx500_pinctrl), + GFP_KERNEL); + if (pct == NULL) { + dev_err(&pdev->dev, + "failed to allocate memory for pct\n"); + return -ENOMEM; + } + + pct->dev = &pdev->dev; + pct->parent = dev_get_drvdata(pdev->dev.parent); + pct->chip = abx500gpio_chip; + pct->chip.dev = &pdev->dev; + pct->chip.base = pdata->gpio_base; + pct->chip.base = (np) ? -1 : pdata->gpio_base; + + /* initialize the lock */ + mutex_init(&pct->lock); + + /* Poke in other ASIC variants here */ + switch (id) { + case PINCTRL_AB8500: + abx500_pinctrl_ab8500_init(&pct->soc); + break; + case PINCTRL_AB8540: + abx500_pinctrl_ab8540_init(&pct->soc); + break; + case PINCTRL_AB9540: + abx500_pinctrl_ab9540_init(&pct->soc); + break; + case PINCTRL_AB8505: + abx500_pinctrl_ab8505_init(&pct->soc); + break; + default: + dev_err(&pdev->dev, "Unsupported pinctrl sub driver (%d)\n", + (int) platid->driver_data); + mutex_destroy(&pct->lock); + return -EINVAL; + } + + if (!pct->soc) { + dev_err(&pdev->dev, "Invalid SOC data\n"); + mutex_destroy(&pct->lock); + return -EINVAL; + } + + pct->chip.ngpio = abx500_get_gpio_num(pct->soc); + pct->irq_cluster = pct->soc->gpio_irq_cluster; + pct->irq_cluster_size = pct->soc->ngpio_irq_cluster; + + ret = gpiochip_add(&pct->chip); + if (ret) { + dev_err(&pdev->dev, "unable to add gpiochip: %d\n", ret); + mutex_destroy(&pct->lock); + return ret; + } + dev_info(&pdev->dev, "added gpiochip\n"); + + abx500_pinctrl_desc.pins = pct->soc->pins; + abx500_pinctrl_desc.npins = pct->soc->npins; + pct->pctldev = pinctrl_register(&abx500_pinctrl_desc, &pdev->dev, pct); + if (!pct->pctldev) { + dev_err(&pdev->dev, + "could not register abx500 pinctrl driver\n"); + ret = -EINVAL; + goto out_rem_chip; + } + dev_info(&pdev->dev, "registered pin controller\n"); + + /* We will handle a range of GPIO pins */ + for (i = 0; i < pct->soc->gpio_num_ranges; i++) { + const struct abx500_pinrange *p = &pct->soc->gpio_ranges[i]; + + ret = gpiochip_add_pin_range(&pct->chip, + dev_name(&pdev->dev), + p->offset - 1, p->offset, p->npins); + if (ret < 0) + goto out_rem_chip; + } + + platform_set_drvdata(pdev, pct); + dev_info(&pdev->dev, "initialized abx500 pinctrl driver\n"); + + return 0; + +out_rem_chip: + err = gpiochip_remove(&pct->chip); + if (err) + dev_info(&pdev->dev, "failed to remove gpiochip\n"); + + mutex_destroy(&pct->lock); + return ret; +} + +/** + * abx500_gpio_remove() - remove Ab8500-gpio driver + * @pdev: Platform device registered + */ +static int abx500_gpio_remove(struct platform_device *pdev) +{ + struct abx500_pinctrl *pct = platform_get_drvdata(pdev); + int ret; + + ret = gpiochip_remove(&pct->chip); + if (ret < 0) { + dev_err(pct->dev, "unable to remove gpiochip: %d\n", + ret); + return ret; + } + + mutex_destroy(&pct->lock); + + return 0; +} + +static const struct platform_device_id abx500_pinctrl_id[] = { + { "pinctrl-ab8500", PINCTRL_AB8500 }, + { "pinctrl-ab8540", PINCTRL_AB8540 }, + { "pinctrl-ab9540", PINCTRL_AB9540 }, + { "pinctrl-ab8505", PINCTRL_AB8505 }, + { }, +}; + +static struct platform_driver abx500_gpio_driver = { + .driver = { + .name = "abx500-gpio", + .owner = THIS_MODULE, + .of_match_table = abx500_gpio_match, + }, + .probe = abx500_gpio_probe, + .remove = abx500_gpio_remove, + .id_table = abx500_pinctrl_id, +}; + +static int __init abx500_gpio_init(void) +{ + return platform_driver_register(&abx500_gpio_driver); +} +core_initcall(abx500_gpio_init); + +MODULE_AUTHOR("Patrice Chotard <patrice.chotard@st.com>"); +MODULE_DESCRIPTION("Driver allows to use AxB5xx unused pins to be used as GPIO"); +MODULE_ALIAS("platform:abx500-gpio"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/pinctrl/pinctrl-abx500.h b/drivers/pinctrl/pinctrl-abx500.h new file mode 100644 index 000000000000..eeca8f973999 --- /dev/null +++ b/drivers/pinctrl/pinctrl-abx500.h @@ -0,0 +1,234 @@ +#ifndef PINCTRL_PINCTRL_ABx5O0_H +#define PINCTRL_PINCTRL_ABx500_H + +/* Package definitions */ +#define PINCTRL_AB8500 0 +#define PINCTRL_AB8540 1 +#define PINCTRL_AB9540 2 +#define PINCTRL_AB8505 3 + +/* pins alternate function */ +enum abx500_pin_func { + ABX500_DEFAULT, + ABX500_ALT_A, + ABX500_ALT_B, + ABX500_ALT_C, +}; + +/** + * struct abx500_function - ABx500 pinctrl mux function + * @name: The name of the function, exported to pinctrl core. + * @groups: An array of pin groups that may select this function. + * @ngroups: The number of entries in @groups. + */ +struct abx500_function { + const char *name; + const char * const *groups; + unsigned ngroups; +}; + +/** + * struct abx500_pingroup - describes a ABx500 pin group + * @name: the name of this specific pin group + * @pins: an array of discrete physical pins used in this group, taken + * from the driver-local pin enumeration space + * @num_pins: the number of pins in this group array, i.e. the number of + * elements in .pins so we can iterate over that array + * @altsetting: the altsetting to apply to all pins in this group to + * configure them to be used by a function + */ +struct abx500_pingroup { + const char *name; + const unsigned int *pins; + const unsigned npins; + int altsetting; +}; + +#define ALTERNATE_FUNCTIONS(pin, sel_bit, alt1, alt2, alta, altb, altc) \ +{ \ + .pin_number = pin, \ + .gpiosel_bit = sel_bit, \ + .alt_bit1 = alt1, \ + .alt_bit2 = alt2, \ + .alta_val = alta, \ + .altb_val = altb, \ + .altc_val = altc, \ +} + +#define UNUSED -1 +/** + * struct alternate_functions + * @pin_number: The pin number + * @gpiosel_bit: Control bit in GPIOSEL register, + * @alt_bit1: First AlternateFunction bit used to select the + * alternate function + * @alt_bit2: Second AlternateFunction bit used to select the + * alternate function + * + * these 3 following fields are necessary due to none + * coherency on how to select the altA, altB and altC + * function between the ABx500 SOC family when using + * alternatfunc register. + * @alta_val: value to write in alternatfunc to select altA function + * @altb_val: value to write in alternatfunc to select altB function + * @altc_val: value to write in alternatfunc to select altC function + */ +struct alternate_functions { + unsigned pin_number; + s8 gpiosel_bit; + s8 alt_bit1; + s8 alt_bit2; + u8 alta_val; + u8 altb_val; + u8 altc_val; +}; + +/** + * struct pullud - specific pull up/down feature + * @first_pin: The pin number of the first pins which support + * specific pull up/down + * @last_pin: The pin number of the last pins + */ +struct pullud { + unsigned first_pin; + unsigned last_pin; +}; + +#define GPIO_IRQ_CLUSTER(a, b, c) \ +{ \ + .start = a, \ + .end = b, \ + .to_irq = c, \ +} + +/** + * struct abx500_gpio_irq_cluster - indicates GPIOs which are interrupt + * capable + * @start: The pin number of the first pin interrupt capable + * @end: The pin number of the last pin interrupt capable + * @to_irq: The ABx500 GPIO's associated IRQs are clustered + * together throughout the interrupt numbers at irregular + * intervals. To solve this quandary, we will place the + * read-in values into the cluster information table + */ + +struct abx500_gpio_irq_cluster { + int start; + int end; + int to_irq; +}; + +/** + * struct abx500_pinrange - map pin numbers to GPIO offsets + * @offset: offset into the GPIO local numberspace, incidentally + * identical to the offset into the local pin numberspace + * @npins: number of pins to map from both offsets + * @altfunc: altfunc setting to be used to enable GPIO on a pin in + * this range (may vary) + */ +struct abx500_pinrange { + unsigned int offset; + unsigned int npins; + int altfunc; +}; + +#define ABX500_PINRANGE(a, b, c) { .offset = a, .npins = b, .altfunc = c } + +/** + * struct abx500_pinctrl_soc_data - ABx500 pin controller per-SoC configuration + * @gpio_ranges: An array of GPIO ranges for this SoC + * @gpio_num_ranges: The number of GPIO ranges for this SoC + * @pins: An array describing all pins the pin controller affects. + * All pins which are also GPIOs must be listed first within the + * array, and be numbered identically to the GPIO controller's + * numbering. + * @npins: The number of entries in @pins. + * @functions: The functions supported on this SoC. + * @nfunction: The number of entries in @functions. + * @groups: An array describing all pin groups the pin SoC supports. + * @ngroups: The number of entries in @groups. + * @alternate_functions: array describing pins which supports alternate and + * how to set it. + * @pullud: array describing pins which supports pull up/down + * specific registers. + * @gpio_irq_cluster: An array of GPIO interrupt capable for this SoC + * @ngpio_irq_cluster: The number of GPIO inetrrupt capable for this SoC + * @irq_gpio_rising_offset: Interrupt offset used as base to compute specific + * setting strategy of the rising interrupt line + * @irq_gpio_falling_offset: Interrupt offset used as base to compute specific + * setting strategy of the falling interrupt line + * @irq_gpio_factor: Factor used to compute specific setting strategy of + * the interrupt line + */ + +struct abx500_pinctrl_soc_data { + const struct abx500_pinrange *gpio_ranges; + unsigned gpio_num_ranges; + const struct pinctrl_pin_desc *pins; + unsigned npins; + const struct abx500_function *functions; + unsigned nfunctions; + const struct abx500_pingroup *groups; + unsigned ngroups; + struct alternate_functions *alternate_functions; + struct pullud *pullud; + struct abx500_gpio_irq_cluster *gpio_irq_cluster; + unsigned ngpio_irq_cluster; + int irq_gpio_rising_offset; + int irq_gpio_falling_offset; + int irq_gpio_factor; +}; + +#ifdef CONFIG_PINCTRL_AB8500 + +void abx500_pinctrl_ab8500_init(struct abx500_pinctrl_soc_data **soc); + +#else + +static inline void +abx500_pinctrl_ab8500_init(struct abx500_pinctrl_soc_data **soc) +{ +} + +#endif + +#ifdef CONFIG_PINCTRL_AB8540 + +void abx500_pinctrl_ab8540_init(struct abx500_pinctrl_soc_data **soc); + +#else + +static inline void +abx500_pinctrl_ab8540_init(struct abx500_pinctrl_soc_data **soc) +{ +} + +#endif + +#ifdef CONFIG_PINCTRL_AB9540 + +void abx500_pinctrl_ab9540_init(struct abx500_pinctrl_soc_data **soc); + +#else + +static inline void +abx500_pinctrl_ab9540_init(struct abx500_pinctrl_soc_data **soc) +{ +} + +#endif + +#ifdef CONFIG_PINCTRL_AB8505 + +void abx500_pinctrl_ab8505_init(struct abx500_pinctrl_soc_data **soc); + +#else + +static inline void +abx500_pinctrl_ab8505_init(struct abx500_pinctrl_soc_data **soc) +{ +} + +#endif + +#endif /* PINCTRL_PINCTRL_ABx500_H */ diff --git a/drivers/pinctrl/pinctrl-falcon.c b/drivers/pinctrl/pinctrl-falcon.c index 8ed20e84cb02..4a0d54a08890 100644 --- a/drivers/pinctrl/pinctrl-falcon.c +++ b/drivers/pinctrl/pinctrl-falcon.c @@ -170,7 +170,7 @@ static const unsigned pins_ntr[] = {GPIO4}; static const unsigned pins_ntr8k[] = {GPIO5}; static const unsigned pins_hrst[] = {GPIO6}; static const unsigned pins_mdio[] = {GPIO7, GPIO8}; -static const unsigned pins_bled[] = {GPIO7, GPIO10, GPIO11, +static const unsigned pins_bled[] = {GPIO9, GPIO10, GPIO11, GPIO12, GPIO13, GPIO14}; static const unsigned pins_asc0[] = {GPIO32, GPIO33}; static const unsigned pins_spi[] = {GPIO34, GPIO35, GPIO36}; @@ -315,6 +315,37 @@ static int falcon_pinconf_set(struct pinctrl_dev *pctrldev, static void falcon_pinconf_dbg_show(struct pinctrl_dev *pctrldev, struct seq_file *s, unsigned offset) { + unsigned long config; + struct pin_desc *desc; + + struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev); + int port = PORT(offset); + + seq_printf(s, " (port %d) mux %d -- ", port, + pad_r32(info->membase[port], LTQ_PADC_MUX(PORT_PIN(offset)))); + + config = LTQ_PINCONF_PACK(LTQ_PINCONF_PARAM_PULL, 0); + if (!falcon_pinconf_get(pctrldev, offset, &config)) + seq_printf(s, "pull %d ", + (int)LTQ_PINCONF_UNPACK_ARG(config)); + + config = LTQ_PINCONF_PACK(LTQ_PINCONF_PARAM_DRIVE_CURRENT, 0); + if (!falcon_pinconf_get(pctrldev, offset, &config)) + seq_printf(s, "drive-current %d ", + (int)LTQ_PINCONF_UNPACK_ARG(config)); + + config = LTQ_PINCONF_PACK(LTQ_PINCONF_PARAM_SLEW_RATE, 0); + if (!falcon_pinconf_get(pctrldev, offset, &config)) + seq_printf(s, "slew-rate %d ", + (int)LTQ_PINCONF_UNPACK_ARG(config)); + + desc = pin_desc_get(pctrldev, offset); + if (desc) { + if (desc->gpio_owner) + seq_printf(s, " owner: %s", desc->gpio_owner); + } else { + seq_printf(s, " not registered"); + } } static void falcon_pinconf_group_dbg_show(struct pinctrl_dev *pctrldev, @@ -360,6 +391,8 @@ static const struct ltq_cfg_param falcon_cfg_params[] = { static struct ltq_pinmux_info falcon_info = { .desc = &falcon_pctrl_desc, .apply_mux = falcon_mux_apply, + .params = falcon_cfg_params, + .num_params = ARRAY_SIZE(falcon_cfg_params), }; @@ -398,6 +431,9 @@ static int pinctrl_falcon_probe(struct platform_device *pdev) u32 avail; int pins; + if (!of_device_is_available(np)) + continue; + if (!ppdev) { dev_err(&pdev->dev, "failed to find pad pdev\n"); continue; diff --git a/drivers/pinctrl/pinctrl-lantiq.c b/drivers/pinctrl/pinctrl-lantiq.c index 15f501d89026..a70384611351 100644 --- a/drivers/pinctrl/pinctrl-lantiq.c +++ b/drivers/pinctrl/pinctrl-lantiq.c @@ -64,11 +64,13 @@ static void ltq_pinctrl_pin_dbg_show(struct pinctrl_dev *pctldev, seq_printf(s, " %s", dev_name(pctldev->dev)); } -static int ltq_pinctrl_dt_subnode_to_map(struct pinctrl_dev *pctldev, +static void ltq_pinctrl_dt_subnode_to_map(struct pinctrl_dev *pctldev, struct device_node *np, struct pinctrl_map **map) { struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctldev); + struct property *pins = of_find_property(np, "lantiq,pins", NULL); + struct property *groups = of_find_property(np, "lantiq,groups", NULL); unsigned long configs[3]; unsigned num_configs = 0; struct property *prop; @@ -76,8 +78,20 @@ static int ltq_pinctrl_dt_subnode_to_map(struct pinctrl_dev *pctldev, const char *function; int ret, i; + if (!pins && !groups) { + dev_err(pctldev->dev, "%s defines neither pins nor groups\n", + np->name); + return; + } + + if (pins && groups) { + dev_err(pctldev->dev, "%s defines both pins and groups\n", + np->name); + return; + } + ret = of_property_read_string(np, "lantiq,function", &function); - if (!ret) { + if (groups && !ret) { of_property_for_each_string(np, "lantiq,groups", prop, group) { (*map)->type = PIN_MAP_TYPE_MUX_GROUP; (*map)->name = function; @@ -85,11 +99,6 @@ static int ltq_pinctrl_dt_subnode_to_map(struct pinctrl_dev *pctldev, (*map)->data.mux.function = function; (*map)++; } - if (of_find_property(np, "lantiq,pins", NULL)) - dev_err(pctldev->dev, - "%s mixes pins and groups settings\n", - np->name); - return 0; } for (i = 0; i < info->num_params; i++) { @@ -103,7 +112,7 @@ static int ltq_pinctrl_dt_subnode_to_map(struct pinctrl_dev *pctldev, } if (!num_configs) - return -EINVAL; + return; of_property_for_each_string(np, "lantiq,pins", prop, pin) { (*map)->data.configs.configs = kmemdup(configs, @@ -115,7 +124,16 @@ static int ltq_pinctrl_dt_subnode_to_map(struct pinctrl_dev *pctldev, (*map)->data.configs.num_configs = num_configs; (*map)++; } - return 0; + of_property_for_each_string(np, "lantiq,groups", prop, group) { + (*map)->data.configs.configs = kmemdup(configs, + num_configs * sizeof(unsigned long), + GFP_KERNEL); + (*map)->type = PIN_MAP_TYPE_CONFIGS_GROUP; + (*map)->name = group; + (*map)->data.configs.group_or_pin = group; + (*map)->data.configs.num_configs = num_configs; + (*map)++; + } } static int ltq_pinctrl_dt_subnode_size(struct device_node *np) @@ -135,23 +153,19 @@ static int ltq_pinctrl_dt_node_to_map(struct pinctrl_dev *pctldev, { struct pinctrl_map *tmp; struct device_node *np; - int ret; + int max_maps = 0; - *num_maps = 0; for_each_child_of_node(np_config, np) - *num_maps += ltq_pinctrl_dt_subnode_size(np); - *map = kzalloc(*num_maps * sizeof(struct pinctrl_map), GFP_KERNEL); + max_maps += ltq_pinctrl_dt_subnode_size(np); + *map = kzalloc(max_maps * sizeof(struct pinctrl_map) * 2, GFP_KERNEL); if (!*map) return -ENOMEM; tmp = *map; - for_each_child_of_node(np_config, np) { - ret = ltq_pinctrl_dt_subnode_to_map(pctldev, np, &tmp); - if (ret < 0) { - ltq_pinctrl_dt_free_map(pctldev, *map, *num_maps); - return ret; - } - } + for_each_child_of_node(np_config, np) + ltq_pinctrl_dt_subnode_to_map(pctldev, np, &tmp); + *num_maps = ((int)(tmp - *map)); + return 0; } @@ -280,7 +294,7 @@ static int ltq_pmx_gpio_request_enable(struct pinctrl_dev *pctrldev, unsigned pin) { struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctrldev); - int mfp = match_mfp(info, pin + (range->id * 32)); + int mfp = match_mfp(info, pin); int pin_func; if (mfp < 0) { diff --git a/drivers/pinctrl/pinctrl-lantiq.h b/drivers/pinctrl/pinctrl-lantiq.h index 4419d32a0ade..6d07f0238532 100644 --- a/drivers/pinctrl/pinctrl-lantiq.h +++ b/drivers/pinctrl/pinctrl-lantiq.h @@ -34,6 +34,7 @@ enum ltq_pinconf_param { LTQ_PINCONF_PARAM_OPEN_DRAIN, LTQ_PINCONF_PARAM_DRIVE_CURRENT, LTQ_PINCONF_PARAM_SLEW_RATE, + LTQ_PINCONF_PARAM_OUTPUT, }; struct ltq_cfg_param { diff --git a/drivers/pinctrl/pinctrl-nomadik.c b/drivers/pinctrl/pinctrl-nomadik.c index 5767b18ebdff..de9e8519b803 100644 --- a/drivers/pinctrl/pinctrl-nomadik.c +++ b/drivers/pinctrl/pinctrl-nomadik.c @@ -25,6 +25,8 @@ #include <linux/irqdomain.h> #include <linux/slab.h> #include <linux/of_device.h> +#include <linux/of_address.h> +#include <linux/pinctrl/machine.h> #include <linux/pinctrl/pinctrl.h> #include <linux/pinctrl/pinmux.h> #include <linux/pinctrl/pinconf.h> @@ -32,8 +34,8 @@ #include <linux/pinctrl/consumer.h> #include <linux/platform_data/pinctrl-nomadik.h> #include <asm/mach/irq.h> -#include <mach/irqs.h> #include "pinctrl-nomadik.h" +#include "core.h" /* * The GPIO module in the Nomadik family of Systems-on-Chip is an @@ -216,7 +218,7 @@ nmk_gpio_disable_lazy_irq(struct nmk_gpio_chip *nmk_chip, unsigned offset) u32 falling = nmk_chip->fimsc & BIT(offset); u32 rising = nmk_chip->rimsc & BIT(offset); int gpio = nmk_chip->chip.base + offset; - int irq = NOMADIK_GPIO_TO_IRQ(gpio); + int irq = irq_find_mapping(nmk_chip->domain, offset); struct irq_data *d = irq_get_irq_data(irq); if (!rising && !falling) @@ -1341,8 +1343,7 @@ static int nmk_gpio_probe(struct platform_device *dev) if (of_property_read_u32(np, "gpio-bank", &dev->id)) { dev_err(&dev->dev, "gpio-bank property not found\n"); - ret = -EINVAL; - goto out; + return -EINVAL; } pdata->first_gpio = dev->id * NMK_GPIO_PER_CHIP; @@ -1350,41 +1351,29 @@ static int nmk_gpio_probe(struct platform_device *dev) } res = platform_get_resource(dev, IORESOURCE_MEM, 0); - if (!res) { - ret = -ENOENT; - goto out; - } + if (!res) + return -ENOENT; irq = platform_get_irq(dev, 0); - if (irq < 0) { - ret = irq; - goto out; - } + if (irq < 0) + return irq; secondary_irq = platform_get_irq(dev, 1); - if (secondary_irq >= 0 && !pdata->get_secondary_status) { - ret = -EINVAL; - goto out; - } + if (secondary_irq >= 0 && !pdata->get_secondary_status) + return -EINVAL; base = devm_request_and_ioremap(&dev->dev, res); - if (!base) { - ret = -ENOMEM; - goto out; - } + if (!base) + return -ENOMEM; clk = devm_clk_get(&dev->dev, NULL); - if (IS_ERR(clk)) { - ret = PTR_ERR(clk); - goto out; - } + if (IS_ERR(clk)) + return PTR_ERR(clk); clk_prepare(clk); nmk_chip = devm_kzalloc(&dev->dev, sizeof(*nmk_chip), GFP_KERNEL); - if (!nmk_chip) { - ret = -ENOMEM; - goto out; - } + if (!nmk_chip) + return -ENOMEM; /* * The virt address in nmk_chip->addr is in the nomadik register space, @@ -1418,7 +1407,7 @@ static int nmk_gpio_probe(struct platform_device *dev) ret = gpiochip_add(&nmk_chip->chip); if (ret) - goto out; + return ret; BUG_ON(nmk_chip->bank >= ARRAY_SIZE(nmk_gpio_chips)); @@ -1427,14 +1416,15 @@ static int nmk_gpio_probe(struct platform_device *dev) platform_set_drvdata(dev, nmk_chip); if (!np) - irq_start = NOMADIK_GPIO_TO_IRQ(pdata->first_gpio); + irq_start = pdata->first_irq; nmk_chip->domain = irq_domain_add_simple(np, NMK_GPIO_PER_CHIP, irq_start, &nmk_gpio_irq_simple_ops, nmk_chip); if (!nmk_chip->domain) { dev_err(&dev->dev, "failed to create irqdomain\n"); - ret = -ENOSYS; - goto out; + /* Just do this, no matter if it fails */ + ret = gpiochip_remove(&nmk_chip->chip); + return -ENOSYS; } nmk_gpio_init_irq(nmk_chip); @@ -1442,12 +1432,6 @@ static int nmk_gpio_probe(struct platform_device *dev) dev_info(&dev->dev, "at address %p\n", nmk_chip->addr); return 0; - -out: - dev_err(&dev->dev, "Failure %i for GPIO %i-%i\n", ret, - pdata->first_gpio, pdata->first_gpio+31); - - return ret; } static int nmk_get_groups_cnt(struct pinctrl_dev *pctldev) @@ -1508,11 +1492,285 @@ static void nmk_pin_dbg_show(struct pinctrl_dev *pctldev, struct seq_file *s, nmk_gpio_dbg_show_one(s, pctldev, chip, offset - chip->base, offset); } +static void nmk_pinctrl_dt_free_map(struct pinctrl_dev *pctldev, + struct pinctrl_map *map, unsigned num_maps) +{ + int i; + + for (i = 0; i < num_maps; i++) + if (map[i].type == PIN_MAP_TYPE_CONFIGS_PIN) + kfree(map[i].data.configs.configs); + kfree(map); +} + +static int nmk_dt_reserve_map(struct pinctrl_map **map, unsigned *reserved_maps, + unsigned *num_maps, unsigned reserve) +{ + unsigned old_num = *reserved_maps; + unsigned new_num = *num_maps + reserve; + struct pinctrl_map *new_map; + + if (old_num >= new_num) + return 0; + + new_map = krealloc(*map, sizeof(*new_map) * new_num, GFP_KERNEL); + if (!new_map) + return -ENOMEM; + + memset(new_map + old_num, 0, (new_num - old_num) * sizeof(*new_map)); + + *map = new_map; + *reserved_maps = new_num; + + return 0; +} + +static int nmk_dt_add_map_mux(struct pinctrl_map **map, unsigned *reserved_maps, + unsigned *num_maps, const char *group, + const char *function) +{ + if (*num_maps == *reserved_maps) + return -ENOSPC; + + (*map)[*num_maps].type = PIN_MAP_TYPE_MUX_GROUP; + (*map)[*num_maps].data.mux.group = group; + (*map)[*num_maps].data.mux.function = function; + (*num_maps)++; + + return 0; +} + +static int nmk_dt_add_map_configs(struct pinctrl_map **map, + unsigned *reserved_maps, + unsigned *num_maps, const char *group, + unsigned long *configs, unsigned num_configs) +{ + unsigned long *dup_configs; + + if (*num_maps == *reserved_maps) + return -ENOSPC; + + dup_configs = kmemdup(configs, num_configs * sizeof(*dup_configs), + GFP_KERNEL); + if (!dup_configs) + return -ENOMEM; + + (*map)[*num_maps].type = PIN_MAP_TYPE_CONFIGS_PIN; + + (*map)[*num_maps].data.configs.group_or_pin = group; + (*map)[*num_maps].data.configs.configs = dup_configs; + (*map)[*num_maps].data.configs.num_configs = num_configs; + (*num_maps)++; + + return 0; +} + +#define NMK_CONFIG_PIN(x,y) { .property = x, .config = y, } +#define NMK_CONFIG_PIN_ARRAY(x,y) { .property = x, .choice = y, \ + .size = ARRAY_SIZE(y), } + +static const unsigned long nmk_pin_input_modes[] = { + PIN_INPUT_NOPULL, + PIN_INPUT_PULLUP, + PIN_INPUT_PULLDOWN, +}; + +static const unsigned long nmk_pin_output_modes[] = { + PIN_OUTPUT_LOW, + PIN_OUTPUT_HIGH, + PIN_DIR_OUTPUT, +}; + +static const unsigned long nmk_pin_sleep_modes[] = { + PIN_SLEEPMODE_DISABLED, + PIN_SLEEPMODE_ENABLED, +}; + +static const unsigned long nmk_pin_sleep_input_modes[] = { + PIN_SLPM_INPUT_NOPULL, + PIN_SLPM_INPUT_PULLUP, + PIN_SLPM_INPUT_PULLDOWN, + PIN_SLPM_DIR_INPUT, +}; + +static const unsigned long nmk_pin_sleep_output_modes[] = { + PIN_SLPM_OUTPUT_LOW, + PIN_SLPM_OUTPUT_HIGH, + PIN_SLPM_DIR_OUTPUT, +}; + +static const unsigned long nmk_pin_sleep_wakeup_modes[] = { + PIN_SLPM_WAKEUP_DISABLE, + PIN_SLPM_WAKEUP_ENABLE, +}; + +static const unsigned long nmk_pin_gpio_modes[] = { + PIN_GPIOMODE_DISABLED, + PIN_GPIOMODE_ENABLED, +}; + +static const unsigned long nmk_pin_sleep_pdis_modes[] = { + PIN_SLPM_PDIS_DISABLED, + PIN_SLPM_PDIS_ENABLED, +}; + +struct nmk_cfg_param { + const char *property; + unsigned long config; + const unsigned long *choice; + int size; +}; + +static const struct nmk_cfg_param nmk_cfg_params[] = { + NMK_CONFIG_PIN_ARRAY("ste,input", nmk_pin_input_modes), + NMK_CONFIG_PIN_ARRAY("ste,output", nmk_pin_output_modes), + NMK_CONFIG_PIN_ARRAY("ste,sleep", nmk_pin_sleep_modes), + NMK_CONFIG_PIN_ARRAY("ste,sleep-input", nmk_pin_sleep_input_modes), + NMK_CONFIG_PIN_ARRAY("ste,sleep-output", nmk_pin_sleep_output_modes), + NMK_CONFIG_PIN_ARRAY("ste,sleep-wakeup", nmk_pin_sleep_wakeup_modes), + NMK_CONFIG_PIN_ARRAY("ste,gpio", nmk_pin_gpio_modes), + NMK_CONFIG_PIN_ARRAY("ste,sleep-pull-disable", nmk_pin_sleep_pdis_modes), +}; + +static int nmk_dt_pin_config(int index, int val, unsigned long *config) +{ + int ret = 0; + + if (nmk_cfg_params[index].choice == NULL) + *config = nmk_cfg_params[index].config; + else { + /* test if out of range */ + if (val < nmk_cfg_params[index].size) { + *config = nmk_cfg_params[index].config | + nmk_cfg_params[index].choice[val]; + } + } + return ret; +} + +static const char *nmk_find_pin_name(struct pinctrl_dev *pctldev, const char *pin_name) +{ + int i, pin_number; + struct nmk_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev); + + if (sscanf((char *)pin_name, "GPIO%d", &pin_number) == 1) + for (i = 0; i < npct->soc->npins; i++) + if (npct->soc->pins[i].number == pin_number) + return npct->soc->pins[i].name; + return NULL; +} + +static bool nmk_pinctrl_dt_get_config(struct device_node *np, + unsigned long *configs) +{ + bool has_config = 0; + unsigned long cfg = 0; + int i, val, ret; + + for (i = 0; i < ARRAY_SIZE(nmk_cfg_params); i++) { + ret = of_property_read_u32(np, + nmk_cfg_params[i].property, &val); + if (ret != -EINVAL) { + if (nmk_dt_pin_config(i, val, &cfg) == 0) { + *configs |= cfg; + has_config = 1; + } + } + } + + return has_config; +} + +int nmk_pinctrl_dt_subnode_to_map(struct pinctrl_dev *pctldev, + struct device_node *np, + struct pinctrl_map **map, + unsigned *reserved_maps, + unsigned *num_maps) +{ + int ret; + const char *function = NULL; + unsigned long configs = 0; + bool has_config = 0; + unsigned reserve = 0; + struct property *prop; + const char *group, *gpio_name; + struct device_node *np_config; + + ret = of_property_read_string(np, "ste,function", &function); + if (ret >= 0) + reserve = 1; + + has_config = nmk_pinctrl_dt_get_config(np, &configs); + + np_config = of_parse_phandle(np, "ste,config", 0); + if (np_config) + has_config |= nmk_pinctrl_dt_get_config(np_config, &configs); + + ret = of_property_count_strings(np, "ste,pins"); + if (ret < 0) + goto exit; + + if (has_config) + reserve++; + + reserve *= ret; + + ret = nmk_dt_reserve_map(map, reserved_maps, num_maps, reserve); + if (ret < 0) + goto exit; + + of_property_for_each_string(np, "ste,pins", prop, group) { + if (function) { + ret = nmk_dt_add_map_mux(map, reserved_maps, num_maps, + group, function); + if (ret < 0) + goto exit; + } + if (has_config) { + gpio_name = nmk_find_pin_name(pctldev, group); + + ret = nmk_dt_add_map_configs(map, reserved_maps, num_maps, + gpio_name, &configs, 1); + if (ret < 0) + goto exit; + } + + } +exit: + return ret; +} + +int nmk_pinctrl_dt_node_to_map(struct pinctrl_dev *pctldev, + struct device_node *np_config, + struct pinctrl_map **map, unsigned *num_maps) +{ + unsigned reserved_maps; + struct device_node *np; + int ret; + + reserved_maps = 0; + *map = NULL; + *num_maps = 0; + + for_each_child_of_node(np_config, np) { + ret = nmk_pinctrl_dt_subnode_to_map(pctldev, np, map, + &reserved_maps, num_maps); + if (ret < 0) { + nmk_pinctrl_dt_free_map(pctldev, *map, *num_maps); + return ret; + } + } + + return 0; +} + static struct pinctrl_ops nmk_pinctrl_ops = { .get_groups_count = nmk_get_groups_cnt, .get_group_name = nmk_get_group_name, .get_group_pins = nmk_get_group_pins, .pin_dbg_show = nmk_pin_dbg_show, + .dt_node_to_map = nmk_pinctrl_dt_node_to_map, + .dt_free_map = nmk_pinctrl_dt_free_map, }; static int nmk_pmx_get_funcs_cnt(struct pinctrl_dev *pctldev) @@ -1846,16 +2104,39 @@ static struct pinctrl_desc nmk_pinctrl_desc = { static const struct of_device_id nmk_pinctrl_match[] = { { - .compatible = "stericsson,nmk_pinctrl", + .compatible = "stericsson,nmk-pinctrl", .data = (void *)PINCTRL_NMK_DB8500, }, {}, }; +static int nmk_pinctrl_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct nmk_pinctrl *npct; + + npct = platform_get_drvdata(pdev); + if (!npct) + return -EINVAL; + + return pinctrl_force_sleep(npct->pctl); +} + +static int nmk_pinctrl_resume(struct platform_device *pdev) +{ + struct nmk_pinctrl *npct; + + npct = platform_get_drvdata(pdev); + if (!npct) + return -EINVAL; + + return pinctrl_force_default(npct->pctl); +} + static int nmk_pinctrl_probe(struct platform_device *pdev) { const struct platform_device_id *platid = platform_get_device_id(pdev); struct device_node *np = pdev->dev.of_node; + struct device_node *prcm_np; struct nmk_pinctrl *npct; struct resource *res; unsigned int version = 0; @@ -1884,21 +2165,26 @@ static int nmk_pinctrl_probe(struct platform_device *pdev) if (version == PINCTRL_NMK_DB8540) nmk_pinctrl_db8540_init(&npct->soc); + if (np) { + prcm_np = of_parse_phandle(np, "prcm", 0); + if (prcm_np) + npct->prcm_base = of_iomap(prcm_np, 0); + } + + /* Allow platform passed information to over-write DT. */ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (res) { + if (res) npct->prcm_base = devm_ioremap(&pdev->dev, res->start, resource_size(res)); - if (!npct->prcm_base) { - dev_err(&pdev->dev, - "failed to ioremap PRCM registers\n"); - return -ENOMEM; + if (!npct->prcm_base) { + if (version == PINCTRL_NMK_STN8815) { + dev_info(&pdev->dev, + "No PRCM base, " + "assuming no ALT-Cx control is available\n"); + } else { + dev_err(&pdev->dev, "missing PRCM base address\n"); + return -EINVAL; } - } else if (version == PINCTRL_NMK_STN8815) { - dev_info(&pdev->dev, - "No PRCM base, assume no ALT-Cx control is available\n"); - } else { - dev_err(&pdev->dev, "missing PRCM base address\n"); - return -EINVAL; } /* @@ -1963,6 +2249,10 @@ static struct platform_driver nmk_pinctrl_driver = { }, .probe = nmk_pinctrl_probe, .id_table = nmk_pinctrl_id, +#ifdef CONFIG_PM + .suspend = nmk_pinctrl_suspend, + .resume = nmk_pinctrl_resume, +#endif }; static int __init nmk_gpio_init(void) diff --git a/drivers/pinctrl/pinctrl-samsung.c b/drivers/pinctrl/pinctrl-samsung.c index fd7b24cd8908..5c20ed056054 100644 --- a/drivers/pinctrl/pinctrl-samsung.c +++ b/drivers/pinctrl/pinctrl-samsung.c @@ -716,7 +716,6 @@ static int samsung_pinctrl_register(struct platform_device *pdev, } ctrldesc->pins = pindesc; ctrldesc->npins = drvdata->ctrl->nr_pins; - ctrldesc->npins = drvdata->ctrl->nr_pins; /* dynamically populate the pin number and pin name for pindesc */ for (pin = 0, pdesc = pindesc; pin < ctrldesc->npins; pin++, pdesc++) diff --git a/drivers/pinctrl/pinctrl-sunxi.c b/drivers/pinctrl/pinctrl-sunxi.c new file mode 100644 index 000000000000..80b11e3415bc --- /dev/null +++ b/drivers/pinctrl/pinctrl-sunxi.c @@ -0,0 +1,1505 @@ +/* + * Allwinner A1X SoCs pinctrl driver. + * + * Copyright (C) 2012 Maxime Ripard + * + * Maxime Ripard <maxime.ripard@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/io.h> +#include <linux/gpio.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_device.h> +#include <linux/pinctrl/consumer.h> +#include <linux/pinctrl/machine.h> +#include <linux/pinctrl/pinctrl.h> +#include <linux/pinctrl/pinconf-generic.h> +#include <linux/pinctrl/pinmux.h> +#include <linux/platform_device.h> +#include <linux/slab.h> + +#include "core.h" +#include "pinctrl-sunxi.h" + +static const struct sunxi_desc_pin sun4i_a10_pins[] = { + SUNXI_PIN(SUNXI_PINCTRL_PIN_PA0, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PA1, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PA2, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PA3, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PA4, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PA5, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PA6, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PA7, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PA8, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PA9, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PA10, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out"), + SUNXI_FUNCTION(0x4, "uart1")), /* TX */ + SUNXI_PIN(SUNXI_PINCTRL_PIN_PA11, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out"), + SUNXI_FUNCTION(0x4, "uart1")), /* RX */ + SUNXI_PIN(SUNXI_PINCTRL_PIN_PA12, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out"), + SUNXI_FUNCTION(0x4, "uart1")), /* RTS */ + SUNXI_PIN(SUNXI_PINCTRL_PIN_PA13, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out"), + SUNXI_FUNCTION(0x4, "uart1")), /* CTS */ + SUNXI_PIN(SUNXI_PINCTRL_PIN_PA14, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out"), + SUNXI_FUNCTION(0x4, "uart1")), /* DTR */ + SUNXI_PIN(SUNXI_PINCTRL_PIN_PA15, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out"), + SUNXI_FUNCTION(0x4, "uart1")), /* DSR */ + SUNXI_PIN(SUNXI_PINCTRL_PIN_PA16, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out"), + SUNXI_FUNCTION(0x4, "uart1")), /* DCD */ + SUNXI_PIN(SUNXI_PINCTRL_PIN_PA17, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out"), + SUNXI_FUNCTION(0x4, "uart1")), /* RING */ + /* Hole */ + SUNXI_PIN(SUNXI_PINCTRL_PIN_PB0, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PB1, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PB2, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PB3, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PB4, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PB5, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PB6, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PB7, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PB8, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PB9, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PB10, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PB11, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PB12, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PB13, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PB14, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PB15, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PB16, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PB17, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PB18, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PB19, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PB20, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PB21, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PB22, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out"), + SUNXI_FUNCTION(0x2, "uart0")), /* TX */ + SUNXI_PIN(SUNXI_PINCTRL_PIN_PB23, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out"), + SUNXI_FUNCTION(0x2, "uart0")), /* RX */ + /* Hole */ + SUNXI_PIN(SUNXI_PINCTRL_PIN_PC0, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PC1, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PC2, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PC3, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PC4, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PC5, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PC6, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PC7, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PC8, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PC9, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PC10, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PC11, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PC12, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PC13, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PC14, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PC15, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PC16, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PC17, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PC18, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PC19, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PC20, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PC21, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PC22, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PC23, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PC24, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + /* Hole */ + SUNXI_PIN(SUNXI_PINCTRL_PIN_PD0, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PD1, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PD2, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PD3, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PD4, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PD5, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PD6, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PD7, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PD8, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PD9, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PD10, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PD11, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PD12, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PD13, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PD14, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PD15, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PD16, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PD17, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PD18, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PD19, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PD20, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PD21, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PD22, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PD23, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PD24, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PD25, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PD26, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PD27, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + /* Hole */ + SUNXI_PIN(SUNXI_PINCTRL_PIN_PE0, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PE1, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PE2, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PE3, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PE4, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PE5, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PE6, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PE7, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PE8, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PE9, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PE10, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PE11, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + /* Hole */ + SUNXI_PIN(SUNXI_PINCTRL_PIN_PF0, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PF1, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PF2, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out"), + SUNXI_FUNCTION(0x4, "uart0")), /* TX */ + SUNXI_PIN(SUNXI_PINCTRL_PIN_PF3, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PF4, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out"), + SUNXI_FUNCTION(0x4, "uart0")), /* RX */ + SUNXI_PIN(SUNXI_PINCTRL_PIN_PF5, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + /* Hole */ + SUNXI_PIN(SUNXI_PINCTRL_PIN_PG0, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PG1, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PG2, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PG3, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PG4, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PG5, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PG6, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PG7, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PG8, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PG9, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PG10, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PG11, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + /* Hole */ + SUNXI_PIN(SUNXI_PINCTRL_PIN_PH0, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PH1, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PH2, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PH3, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PH4, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PH5, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PH6, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PH7, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PH8, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PH9, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PH10, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PH11, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PH12, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PH13, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PH14, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PH15, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PH16, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PH17, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PH18, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PH19, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PH20, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PH21, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PH22, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PH23, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PH24, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PH25, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PH26, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PH27, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + /* Hole */ + SUNXI_PIN(SUNXI_PINCTRL_PIN_PI0, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PI1, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PI2, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PI3, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PI4, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PI5, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PI6, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PI7, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PI8, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PI9, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PI10, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PI11, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PI12, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PI13, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PI14, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PI15, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PI16, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PI17, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PI18, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PI19, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PI20, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PI21, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), +}; + +static const struct sunxi_desc_pin sun5i_a13_pins[] = { + /* Hole */ + SUNXI_PIN(SUNXI_PINCTRL_PIN_PB0, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PB1, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PB2, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PB3, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PB4, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + /* Hole */ + SUNXI_PIN(SUNXI_PINCTRL_PIN_PB10, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + /* Hole */ + SUNXI_PIN(SUNXI_PINCTRL_PIN_PB15, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PB16, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PB17, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PB18, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + /* Hole */ + SUNXI_PIN(SUNXI_PINCTRL_PIN_PC0, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PC1, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PC2, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PC3, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PC4, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PC5, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PC6, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PC7, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PC8, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PC9, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PC10, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PC11, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PC12, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PC13, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PC14, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PC15, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + /* Hole */ + SUNXI_PIN(SUNXI_PINCTRL_PIN_PC19, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + /* Hole */ + SUNXI_PIN(SUNXI_PINCTRL_PIN_PD2, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PD3, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PD4, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PD5, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PD6, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PD7, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + /* Hole */ + SUNXI_PIN(SUNXI_PINCTRL_PIN_PD10, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PD11, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PD12, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PD13, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PD14, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PD15, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + /* Hole */ + SUNXI_PIN(SUNXI_PINCTRL_PIN_PD18, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PD19, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PD20, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PD21, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PD22, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PD23, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PD24, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PD25, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PD26, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PD27, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + /* Hole */ + SUNXI_PIN(SUNXI_PINCTRL_PIN_PE0, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PE1, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PE2, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PE3, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PE4, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PE5, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PE6, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PE7, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PE8, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PE9, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PE10, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out"), + SUNXI_FUNCTION(0x4, "uart1")), /* TX */ + SUNXI_PIN(SUNXI_PINCTRL_PIN_PE11, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out"), + SUNXI_FUNCTION(0x4, "uart1")), /* RX */ + /* Hole */ + SUNXI_PIN(SUNXI_PINCTRL_PIN_PF0, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PF1, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PF2, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PF3, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PF4, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PF5, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + /* Hole */ + SUNXI_PIN(SUNXI_PINCTRL_PIN_PG0, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PG1, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PG2, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PG3, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out"), + SUNXI_FUNCTION(0x4, "uart1")), /* TX */ + SUNXI_PIN(SUNXI_PINCTRL_PIN_PG4, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out"), + SUNXI_FUNCTION(0x4, "uart1")), /* RX */ + /* Hole */ + SUNXI_PIN(SUNXI_PINCTRL_PIN_PG9, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PG10, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PG11, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), + SUNXI_PIN(SUNXI_PINCTRL_PIN_PG12, + SUNXI_FUNCTION(0x0, "gpio_in"), + SUNXI_FUNCTION(0x1, "gpio_out")), +}; + +static const struct sunxi_pinctrl_desc sun4i_a10_pinctrl_data = { + .pins = sun4i_a10_pins, + .npins = ARRAY_SIZE(sun4i_a10_pins), +}; + +static const struct sunxi_pinctrl_desc sun5i_a13_pinctrl_data = { + .pins = sun5i_a13_pins, + .npins = ARRAY_SIZE(sun5i_a13_pins), +}; + +static struct sunxi_pinctrl_group * +sunxi_pinctrl_find_group_by_name(struct sunxi_pinctrl *pctl, const char *group) +{ + int i; + + for (i = 0; i < pctl->ngroups; i++) { + struct sunxi_pinctrl_group *grp = pctl->groups + i; + + if (!strcmp(grp->name, group)) + return grp; + } + + return NULL; +} + +static struct sunxi_pinctrl_function * +sunxi_pinctrl_find_function_by_name(struct sunxi_pinctrl *pctl, + const char *name) +{ + struct sunxi_pinctrl_function *func = pctl->functions; + int i; + + for (i = 0; i < pctl->nfunctions; i++) { + if (!func[i].name) + break; + + if (!strcmp(func[i].name, name)) + return func + i; + } + + return NULL; +} + +static struct sunxi_desc_function * +sunxi_pinctrl_desc_find_function_by_name(struct sunxi_pinctrl *pctl, + const char *pin_name, + const char *func_name) +{ + int i; + + for (i = 0; i < pctl->desc->npins; i++) { + const struct sunxi_desc_pin *pin = pctl->desc->pins + i; + + if (!strcmp(pin->pin.name, pin_name)) { + struct sunxi_desc_function *func = pin->functions; + + while (func->name) { + if (!strcmp(func->name, func_name)) + return func; + + func++; + } + } + } + + return NULL; +} + +static int sunxi_pctrl_get_groups_count(struct pinctrl_dev *pctldev) +{ + struct sunxi_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev); + + return pctl->ngroups; +} + +static const char *sunxi_pctrl_get_group_name(struct pinctrl_dev *pctldev, + unsigned group) +{ + struct sunxi_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev); + + return pctl->groups[group].name; +} + +static int sunxi_pctrl_get_group_pins(struct pinctrl_dev *pctldev, + unsigned group, + const unsigned **pins, + unsigned *num_pins) +{ + struct sunxi_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev); + + *pins = (unsigned *)&pctl->groups[group].pin; + *num_pins = 1; + + return 0; +} + +static int sunxi_pctrl_dt_node_to_map(struct pinctrl_dev *pctldev, + struct device_node *node, + struct pinctrl_map **map, + unsigned *num_maps) +{ + struct sunxi_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev); + unsigned long *pinconfig; + struct property *prop; + const char *function; + const char *group; + int ret, nmaps, i = 0; + u32 val; + + *map = NULL; + *num_maps = 0; + + ret = of_property_read_string(node, "allwinner,function", &function); + if (ret) { + dev_err(pctl->dev, + "missing allwinner,function property in node %s\n", + node->name); + return -EINVAL; + } + + nmaps = of_property_count_strings(node, "allwinner,pins") * 2; + if (nmaps < 0) { + dev_err(pctl->dev, + "missing allwinner,pins property in node %s\n", + node->name); + return -EINVAL; + } + + *map = kmalloc(nmaps * sizeof(struct pinctrl_map), GFP_KERNEL); + if (!map) + return -ENOMEM; + + of_property_for_each_string(node, "allwinner,pins", prop, group) { + struct sunxi_pinctrl_group *grp = + sunxi_pinctrl_find_group_by_name(pctl, group); + int j = 0, configlen = 0; + + if (!grp) { + dev_err(pctl->dev, "unknown pin %s", group); + continue; + } + + if (!sunxi_pinctrl_desc_find_function_by_name(pctl, + grp->name, + function)) { + dev_err(pctl->dev, "unsupported function %s on pin %s", + function, group); + continue; + } + + (*map)[i].type = PIN_MAP_TYPE_MUX_GROUP; + (*map)[i].data.mux.group = group; + (*map)[i].data.mux.function = function; + + i++; + + (*map)[i].type = PIN_MAP_TYPE_CONFIGS_GROUP; + (*map)[i].data.configs.group_or_pin = group; + + if (of_find_property(node, "allwinner,drive", NULL)) + configlen++; + if (of_find_property(node, "allwinner,pull", NULL)) + configlen++; + + pinconfig = kzalloc(configlen * sizeof(*pinconfig), GFP_KERNEL); + + if (!of_property_read_u32(node, "allwinner,drive", &val)) { + u16 strength = (val + 1) * 10; + pinconfig[j++] = + pinconf_to_config_packed(PIN_CONFIG_DRIVE_STRENGTH, + strength); + } + + if (!of_property_read_u32(node, "allwinner,pull", &val)) { + enum pin_config_param pull = PIN_CONFIG_END; + if (val == 1) + pull = PIN_CONFIG_BIAS_PULL_UP; + else if (val == 2) + pull = PIN_CONFIG_BIAS_PULL_DOWN; + pinconfig[j++] = pinconf_to_config_packed(pull, 0); + } + + (*map)[i].data.configs.configs = pinconfig; + (*map)[i].data.configs.num_configs = configlen; + + i++; + } + + *num_maps = nmaps; + + return 0; +} + +static void sunxi_pctrl_dt_free_map(struct pinctrl_dev *pctldev, + struct pinctrl_map *map, + unsigned num_maps) +{ + int i; + + for (i = 0; i < num_maps; i++) { + if (map[i].type == PIN_MAP_TYPE_CONFIGS_GROUP) + kfree(map[i].data.configs.configs); + } + + kfree(map); +} + +static struct pinctrl_ops sunxi_pctrl_ops = { + .dt_node_to_map = sunxi_pctrl_dt_node_to_map, + .dt_free_map = sunxi_pctrl_dt_free_map, + .get_groups_count = sunxi_pctrl_get_groups_count, + .get_group_name = sunxi_pctrl_get_group_name, + .get_group_pins = sunxi_pctrl_get_group_pins, +}; + +static int sunxi_pconf_group_get(struct pinctrl_dev *pctldev, + unsigned group, + unsigned long *config) +{ + struct sunxi_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev); + + *config = pctl->groups[group].config; + + return 0; +} + +static int sunxi_pconf_group_set(struct pinctrl_dev *pctldev, + unsigned group, + unsigned long config) +{ + struct sunxi_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev); + struct sunxi_pinctrl_group *g = &pctl->groups[group]; + u32 val, mask; + u16 strength; + u8 dlevel; + + switch (pinconf_to_config_param(config)) { + case PIN_CONFIG_DRIVE_STRENGTH: + strength = pinconf_to_config_argument(config); + if (strength > 40) + return -EINVAL; + /* + * We convert from mA to what the register expects: + * 0: 10mA + * 1: 20mA + * 2: 30mA + * 3: 40mA + */ + dlevel = strength / 10 - 1; + val = readl(pctl->membase + sunxi_dlevel_reg(g->pin)); + mask = DLEVEL_PINS_MASK << sunxi_dlevel_offset(g->pin); + writel((val & ~mask) | dlevel << sunxi_dlevel_offset(g->pin), + pctl->membase + sunxi_dlevel_reg(g->pin)); + break; + case PIN_CONFIG_BIAS_PULL_UP: + val = readl(pctl->membase + sunxi_pull_reg(g->pin)); + mask = PULL_PINS_MASK << sunxi_pull_offset(g->pin); + writel((val & ~mask) | 1 << sunxi_pull_offset(g->pin), + pctl->membase + sunxi_pull_reg(g->pin)); + break; + case PIN_CONFIG_BIAS_PULL_DOWN: + val = readl(pctl->membase + sunxi_pull_reg(g->pin)); + mask = PULL_PINS_MASK << sunxi_pull_offset(g->pin); + writel((val & ~mask) | 2 << sunxi_pull_offset(g->pin), + pctl->membase + sunxi_pull_reg(g->pin)); + break; + default: + break; + } + + /* cache the config value */ + g->config = config; + + return 0; +} + +static struct pinconf_ops sunxi_pconf_ops = { + .pin_config_group_get = sunxi_pconf_group_get, + .pin_config_group_set = sunxi_pconf_group_set, +}; + +static int sunxi_pmx_get_funcs_cnt(struct pinctrl_dev *pctldev) +{ + struct sunxi_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev); + + return pctl->nfunctions; +} + +static const char *sunxi_pmx_get_func_name(struct pinctrl_dev *pctldev, + unsigned function) +{ + struct sunxi_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev); + + return pctl->functions[function].name; +} + +static int sunxi_pmx_get_func_groups(struct pinctrl_dev *pctldev, + unsigned function, + const char * const **groups, + unsigned * const num_groups) +{ + struct sunxi_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev); + + *groups = pctl->functions[function].groups; + *num_groups = pctl->functions[function].ngroups; + + return 0; +} + +static void sunxi_pmx_set(struct pinctrl_dev *pctldev, + unsigned pin, + u8 config) +{ + struct sunxi_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev); + + u32 val = readl(pctl->membase + sunxi_mux_reg(pin)); + u32 mask = MUX_PINS_MASK << sunxi_mux_offset(pin); + writel((val & ~mask) | config << sunxi_mux_offset(pin), + pctl->membase + sunxi_mux_reg(pin)); +} + +static int sunxi_pmx_enable(struct pinctrl_dev *pctldev, + unsigned function, + unsigned group) +{ + struct sunxi_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev); + struct sunxi_pinctrl_group *g = pctl->groups + group; + struct sunxi_pinctrl_function *func = pctl->functions + function; + struct sunxi_desc_function *desc = + sunxi_pinctrl_desc_find_function_by_name(pctl, + g->name, + func->name); + + if (!desc) + return -EINVAL; + + sunxi_pmx_set(pctldev, g->pin, desc->muxval); + + return 0; +} + +static int +sunxi_pmx_gpio_set_direction(struct pinctrl_dev *pctldev, + struct pinctrl_gpio_range *range, + unsigned offset, + bool input) +{ + struct sunxi_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev); + struct sunxi_desc_function *desc; + char pin_name[SUNXI_PIN_NAME_MAX_LEN]; + const char *func; + u8 bank, pin; + int ret; + + bank = (offset) / PINS_PER_BANK; + pin = (offset) % PINS_PER_BANK; + + ret = sprintf(pin_name, "P%c%d", 'A' + bank, pin); + if (!ret) + goto error; + + if (input) + func = "gpio_in"; + else + func = "gpio_out"; + + desc = sunxi_pinctrl_desc_find_function_by_name(pctl, + pin_name, + func); + if (!desc) { + ret = -EINVAL; + goto error; + } + + sunxi_pmx_set(pctldev, offset, desc->muxval); + + ret = 0; + +error: + return ret; +} + +static struct pinmux_ops sunxi_pmx_ops = { + .get_functions_count = sunxi_pmx_get_funcs_cnt, + .get_function_name = sunxi_pmx_get_func_name, + .get_function_groups = sunxi_pmx_get_func_groups, + .enable = sunxi_pmx_enable, + .gpio_set_direction = sunxi_pmx_gpio_set_direction, +}; + +static struct pinctrl_desc sunxi_pctrl_desc = { + .confops = &sunxi_pconf_ops, + .pctlops = &sunxi_pctrl_ops, + .pmxops = &sunxi_pmx_ops, +}; + +static int sunxi_pinctrl_gpio_request(struct gpio_chip *chip, unsigned offset) +{ + return pinctrl_request_gpio(chip->base + offset); +} + +static void sunxi_pinctrl_gpio_free(struct gpio_chip *chip, unsigned offset) +{ + pinctrl_free_gpio(chip->base + offset); +} + +static int sunxi_pinctrl_gpio_direction_input(struct gpio_chip *chip, + unsigned offset) +{ + return pinctrl_gpio_direction_input(chip->base + offset); +} + +static int sunxi_pinctrl_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + struct sunxi_pinctrl *pctl = dev_get_drvdata(chip->dev); + + u32 reg = sunxi_data_reg(offset); + u8 index = sunxi_data_offset(offset); + u32 val = (readl(pctl->membase + reg) >> index) & DATA_PINS_MASK; + + return val; +} + +static int sunxi_pinctrl_gpio_direction_output(struct gpio_chip *chip, + unsigned offset, int value) +{ + return pinctrl_gpio_direction_output(chip->base + offset); +} + +static void sunxi_pinctrl_gpio_set(struct gpio_chip *chip, + unsigned offset, int value) +{ + struct sunxi_pinctrl *pctl = dev_get_drvdata(chip->dev); + u32 reg = sunxi_data_reg(offset); + u8 index = sunxi_data_offset(offset); + + writel((value & DATA_PINS_MASK) << index, pctl->membase + reg); +} + +static int sunxi_pinctrl_gpio_of_xlate(struct gpio_chip *gc, + const struct of_phandle_args *gpiospec, + u32 *flags) +{ + int pin, base; + + base = PINS_PER_BANK * gpiospec->args[0]; + pin = base + gpiospec->args[1]; + + if (pin > (gc->base + gc->ngpio)) + return -EINVAL; + + if (flags) + *flags = gpiospec->args[2]; + + return pin; +} + +static struct gpio_chip sunxi_pinctrl_gpio_chip = { + .owner = THIS_MODULE, + .request = sunxi_pinctrl_gpio_request, + .free = sunxi_pinctrl_gpio_free, + .direction_input = sunxi_pinctrl_gpio_direction_input, + .direction_output = sunxi_pinctrl_gpio_direction_output, + .get = sunxi_pinctrl_gpio_get, + .set = sunxi_pinctrl_gpio_set, + .of_xlate = sunxi_pinctrl_gpio_of_xlate, + .of_gpio_n_cells = 3, + .can_sleep = 0, +}; + +static struct of_device_id sunxi_pinctrl_match[] = { + { .compatible = "allwinner,sun4i-a10-pinctrl", .data = (void *)&sun4i_a10_pinctrl_data }, + { .compatible = "allwinner,sun5i-a13-pinctrl", .data = (void *)&sun5i_a13_pinctrl_data }, + {} +}; +MODULE_DEVICE_TABLE(of, sunxi_pinctrl_match); + +static int sunxi_pinctrl_add_function(struct sunxi_pinctrl *pctl, + const char *name) +{ + struct sunxi_pinctrl_function *func = pctl->functions; + + while (func->name) { + /* function already there */ + if (strcmp(func->name, name) == 0) { + func->ngroups++; + return -EEXIST; + } + func++; + } + + func->name = name; + func->ngroups = 1; + + pctl->nfunctions++; + + return 0; +} + +static int sunxi_pinctrl_build_state(struct platform_device *pdev) +{ + struct sunxi_pinctrl *pctl = platform_get_drvdata(pdev); + int i; + + pctl->ngroups = pctl->desc->npins; + + /* Allocate groups */ + pctl->groups = devm_kzalloc(&pdev->dev, + pctl->ngroups * sizeof(*pctl->groups), + GFP_KERNEL); + if (!pctl->groups) + return -ENOMEM; + + for (i = 0; i < pctl->desc->npins; i++) { + const struct sunxi_desc_pin *pin = pctl->desc->pins + i; + struct sunxi_pinctrl_group *group = pctl->groups + i; + + group->name = pin->pin.name; + group->pin = pin->pin.number; + } + + /* + * We suppose that we won't have any more functions than pins, + * we'll reallocate that later anyway + */ + pctl->functions = devm_kzalloc(&pdev->dev, + pctl->desc->npins * sizeof(*pctl->functions), + GFP_KERNEL); + if (!pctl->functions) + return -ENOMEM; + + /* Count functions and their associated groups */ + for (i = 0; i < pctl->desc->npins; i++) { + const struct sunxi_desc_pin *pin = pctl->desc->pins + i; + struct sunxi_desc_function *func = pin->functions; + + while (func->name) { + sunxi_pinctrl_add_function(pctl, func->name); + func++; + } + } + + pctl->functions = krealloc(pctl->functions, + pctl->nfunctions * sizeof(*pctl->functions), + GFP_KERNEL); + + for (i = 0; i < pctl->desc->npins; i++) { + const struct sunxi_desc_pin *pin = pctl->desc->pins + i; + struct sunxi_desc_function *func = pin->functions; + + while (func->name) { + struct sunxi_pinctrl_function *func_item; + const char **func_grp; + + func_item = sunxi_pinctrl_find_function_by_name(pctl, + func->name); + if (!func_item) + return -EINVAL; + + if (!func_item->groups) { + func_item->groups = + devm_kzalloc(&pdev->dev, + func_item->ngroups * sizeof(*func_item->groups), + GFP_KERNEL); + if (!func_item->groups) + return -ENOMEM; + } + + func_grp = func_item->groups; + while (*func_grp) + func_grp++; + + *func_grp = pin->pin.name; + func++; + } + } + + return 0; +} + +static int sunxi_pinctrl_probe(struct platform_device *pdev) +{ + struct device_node *node = pdev->dev.of_node; + const struct of_device_id *device; + struct pinctrl_pin_desc *pins; + struct sunxi_pinctrl *pctl; + int i, ret, last_pin; + + pctl = devm_kzalloc(&pdev->dev, sizeof(*pctl), GFP_KERNEL); + if (!pctl) + return -ENOMEM; + platform_set_drvdata(pdev, pctl); + + pctl->membase = of_iomap(node, 0); + if (!pctl->membase) + return -ENOMEM; + + device = of_match_device(sunxi_pinctrl_match, &pdev->dev); + if (!device) + return -ENODEV; + + pctl->desc = (struct sunxi_pinctrl_desc *)device->data; + + ret = sunxi_pinctrl_build_state(pdev); + if (ret) { + dev_err(&pdev->dev, "dt probe failed: %d\n", ret); + return ret; + } + + pins = devm_kzalloc(&pdev->dev, + pctl->desc->npins * sizeof(*pins), + GFP_KERNEL); + if (!pins) + return -ENOMEM; + + for (i = 0; i < pctl->desc->npins; i++) + pins[i] = pctl->desc->pins[i].pin; + + sunxi_pctrl_desc.name = dev_name(&pdev->dev); + sunxi_pctrl_desc.owner = THIS_MODULE; + sunxi_pctrl_desc.pins = pins; + sunxi_pctrl_desc.npins = pctl->desc->npins; + pctl->dev = &pdev->dev; + pctl->pctl_dev = pinctrl_register(&sunxi_pctrl_desc, + &pdev->dev, pctl); + if (!pctl->pctl_dev) { + dev_err(&pdev->dev, "couldn't register pinctrl driver\n"); + return -EINVAL; + } + + pctl->chip = devm_kzalloc(&pdev->dev, sizeof(*pctl->chip), GFP_KERNEL); + if (!pctl->chip) { + ret = -ENOMEM; + goto pinctrl_error; + } + + last_pin = pctl->desc->pins[pctl->desc->npins - 1].pin.number; + pctl->chip = &sunxi_pinctrl_gpio_chip; + pctl->chip->ngpio = round_up(last_pin, PINS_PER_BANK); + pctl->chip->label = dev_name(&pdev->dev); + pctl->chip->dev = &pdev->dev; + pctl->chip->base = 0; + + ret = gpiochip_add(pctl->chip); + if (ret) + goto pinctrl_error; + + for (i = 0; i < pctl->desc->npins; i++) { + const struct sunxi_desc_pin *pin = pctl->desc->pins + i; + + ret = gpiochip_add_pin_range(pctl->chip, dev_name(&pdev->dev), + pin->pin.number, + pin->pin.number, 1); + if (ret) + goto gpiochip_error; + } + + dev_info(&pdev->dev, "initialized sunXi PIO driver\n"); + + return 0; + +gpiochip_error: + ret = gpiochip_remove(pctl->chip); +pinctrl_error: + pinctrl_unregister(pctl->pctl_dev); + return ret; +} + +static struct platform_driver sunxi_pinctrl_driver = { + .probe = sunxi_pinctrl_probe, + .driver = { + .name = "sunxi-pinctrl", + .owner = THIS_MODULE, + .of_match_table = sunxi_pinctrl_match, + }, +}; +module_platform_driver(sunxi_pinctrl_driver); + +MODULE_AUTHOR("Maxime Ripard <maxime.ripard@free-electrons.com"); +MODULE_DESCRIPTION("Allwinner A1X pinctrl driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/pinctrl/pinctrl-sunxi.h b/drivers/pinctrl/pinctrl-sunxi.h new file mode 100644 index 000000000000..e921621059ce --- /dev/null +++ b/drivers/pinctrl/pinctrl-sunxi.h @@ -0,0 +1,478 @@ +/* + * Allwinner A1X SoCs pinctrl driver. + * + * Copyright (C) 2012 Maxime Ripard + * + * Maxime Ripard <maxime.ripard@free-electrons.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#ifndef __PINCTRL_SUNXI_H +#define __PINCTRL_SUNXI_H + +#include <linux/kernel.h> + +#define PA_BASE 0 +#define PB_BASE 32 +#define PC_BASE 64 +#define PD_BASE 96 +#define PE_BASE 128 +#define PF_BASE 160 +#define PG_BASE 192 +#define PH_BASE 224 +#define PI_BASE 256 + +#define SUNXI_PINCTRL_PIN_PA0 PINCTRL_PIN(PA_BASE + 0, "PA0") +#define SUNXI_PINCTRL_PIN_PA1 PINCTRL_PIN(PA_BASE + 1, "PA1") +#define SUNXI_PINCTRL_PIN_PA2 PINCTRL_PIN(PA_BASE + 2, "PA2") +#define SUNXI_PINCTRL_PIN_PA3 PINCTRL_PIN(PA_BASE + 3, "PA3") +#define SUNXI_PINCTRL_PIN_PA4 PINCTRL_PIN(PA_BASE + 4, "PA4") +#define SUNXI_PINCTRL_PIN_PA5 PINCTRL_PIN(PA_BASE + 5, "PA5") +#define SUNXI_PINCTRL_PIN_PA6 PINCTRL_PIN(PA_BASE + 6, "PA6") +#define SUNXI_PINCTRL_PIN_PA7 PINCTRL_PIN(PA_BASE + 7, "PA7") +#define SUNXI_PINCTRL_PIN_PA8 PINCTRL_PIN(PA_BASE + 8, "PA8") +#define SUNXI_PINCTRL_PIN_PA9 PINCTRL_PIN(PA_BASE + 9, "PA9") +#define SUNXI_PINCTRL_PIN_PA10 PINCTRL_PIN(PA_BASE + 10, "PA10") +#define SUNXI_PINCTRL_PIN_PA11 PINCTRL_PIN(PA_BASE + 11, "PA11") +#define SUNXI_PINCTRL_PIN_PA12 PINCTRL_PIN(PA_BASE + 12, "PA12") +#define SUNXI_PINCTRL_PIN_PA13 PINCTRL_PIN(PA_BASE + 13, "PA13") +#define SUNXI_PINCTRL_PIN_PA14 PINCTRL_PIN(PA_BASE + 14, "PA14") +#define SUNXI_PINCTRL_PIN_PA15 PINCTRL_PIN(PA_BASE + 15, "PA15") +#define SUNXI_PINCTRL_PIN_PA16 PINCTRL_PIN(PA_BASE + 16, "PA16") +#define SUNXI_PINCTRL_PIN_PA17 PINCTRL_PIN(PA_BASE + 17, "PA17") +#define SUNXI_PINCTRL_PIN_PA18 PINCTRL_PIN(PA_BASE + 18, "PA18") +#define SUNXI_PINCTRL_PIN_PA19 PINCTRL_PIN(PA_BASE + 19, "PA19") +#define SUNXI_PINCTRL_PIN_PA20 PINCTRL_PIN(PA_BASE + 20, "PA20") +#define SUNXI_PINCTRL_PIN_PA21 PINCTRL_PIN(PA_BASE + 21, "PA21") +#define SUNXI_PINCTRL_PIN_PA22 PINCTRL_PIN(PA_BASE + 22, "PA22") +#define SUNXI_PINCTRL_PIN_PA23 PINCTRL_PIN(PA_BASE + 23, "PA23") +#define SUNXI_PINCTRL_PIN_PA24 PINCTRL_PIN(PA_BASE + 24, "PA24") +#define SUNXI_PINCTRL_PIN_PA25 PINCTRL_PIN(PA_BASE + 25, "PA25") +#define SUNXI_PINCTRL_PIN_PA26 PINCTRL_PIN(PA_BASE + 26, "PA26") +#define SUNXI_PINCTRL_PIN_PA27 PINCTRL_PIN(PA_BASE + 27, "PA27") +#define SUNXI_PINCTRL_PIN_PA28 PINCTRL_PIN(PA_BASE + 28, "PA28") +#define SUNXI_PINCTRL_PIN_PA29 PINCTRL_PIN(PA_BASE + 29, "PA29") +#define SUNXI_PINCTRL_PIN_PA30 PINCTRL_PIN(PA_BASE + 30, "PA30") +#define SUNXI_PINCTRL_PIN_PA31 PINCTRL_PIN(PA_BASE + 31, "PA31") + +#define SUNXI_PINCTRL_PIN_PB0 PINCTRL_PIN(PB_BASE + 0, "PB0") +#define SUNXI_PINCTRL_PIN_PB1 PINCTRL_PIN(PB_BASE + 1, "PB1") +#define SUNXI_PINCTRL_PIN_PB2 PINCTRL_PIN(PB_BASE + 2, "PB2") +#define SUNXI_PINCTRL_PIN_PB3 PINCTRL_PIN(PB_BASE + 3, "PB3") +#define SUNXI_PINCTRL_PIN_PB4 PINCTRL_PIN(PB_BASE + 4, "PB4") +#define SUNXI_PINCTRL_PIN_PB5 PINCTRL_PIN(PB_BASE + 5, "PB5") +#define SUNXI_PINCTRL_PIN_PB6 PINCTRL_PIN(PB_BASE + 6, "PB6") +#define SUNXI_PINCTRL_PIN_PB7 PINCTRL_PIN(PB_BASE + 7, "PB7") +#define SUNXI_PINCTRL_PIN_PB8 PINCTRL_PIN(PB_BASE + 8, "PB8") +#define SUNXI_PINCTRL_PIN_PB9 PINCTRL_PIN(PB_BASE + 9, "PB9") +#define SUNXI_PINCTRL_PIN_PB10 PINCTRL_PIN(PB_BASE + 10, "PB10") +#define SUNXI_PINCTRL_PIN_PB11 PINCTRL_PIN(PB_BASE + 11, "PB11") +#define SUNXI_PINCTRL_PIN_PB12 PINCTRL_PIN(PB_BASE + 12, "PB12") +#define SUNXI_PINCTRL_PIN_PB13 PINCTRL_PIN(PB_BASE + 13, "PB13") +#define SUNXI_PINCTRL_PIN_PB14 PINCTRL_PIN(PB_BASE + 14, "PB14") +#define SUNXI_PINCTRL_PIN_PB15 PINCTRL_PIN(PB_BASE + 15, "PB15") +#define SUNXI_PINCTRL_PIN_PB16 PINCTRL_PIN(PB_BASE + 16, "PB16") +#define SUNXI_PINCTRL_PIN_PB17 PINCTRL_PIN(PB_BASE + 17, "PB17") +#define SUNXI_PINCTRL_PIN_PB18 PINCTRL_PIN(PB_BASE + 18, "PB18") +#define SUNXI_PINCTRL_PIN_PB19 PINCTRL_PIN(PB_BASE + 19, "PB19") +#define SUNXI_PINCTRL_PIN_PB20 PINCTRL_PIN(PB_BASE + 20, "PB20") +#define SUNXI_PINCTRL_PIN_PB21 PINCTRL_PIN(PB_BASE + 21, "PB21") +#define SUNXI_PINCTRL_PIN_PB22 PINCTRL_PIN(PB_BASE + 22, "PB22") +#define SUNXI_PINCTRL_PIN_PB23 PINCTRL_PIN(PB_BASE + 23, "PB23") +#define SUNXI_PINCTRL_PIN_PB24 PINCTRL_PIN(PB_BASE + 24, "PB24") +#define SUNXI_PINCTRL_PIN_PB25 PINCTRL_PIN(PB_BASE + 25, "PB25") +#define SUNXI_PINCTRL_PIN_PB26 PINCTRL_PIN(PB_BASE + 26, "PB26") +#define SUNXI_PINCTRL_PIN_PB27 PINCTRL_PIN(PB_BASE + 27, "PB27") +#define SUNXI_PINCTRL_PIN_PB28 PINCTRL_PIN(PB_BASE + 28, "PB28") +#define SUNXI_PINCTRL_PIN_PB29 PINCTRL_PIN(PB_BASE + 29, "PB29") +#define SUNXI_PINCTRL_PIN_PB30 PINCTRL_PIN(PB_BASE + 30, "PB30") +#define SUNXI_PINCTRL_PIN_PB31 PINCTRL_PIN(PB_BASE + 31, "PB31") + +#define SUNXI_PINCTRL_PIN_PC0 PINCTRL_PIN(PC_BASE + 0, "PC0") +#define SUNXI_PINCTRL_PIN_PC1 PINCTRL_PIN(PC_BASE + 1, "PC1") +#define SUNXI_PINCTRL_PIN_PC2 PINCTRL_PIN(PC_BASE + 2, "PC2") +#define SUNXI_PINCTRL_PIN_PC3 PINCTRL_PIN(PC_BASE + 3, "PC3") +#define SUNXI_PINCTRL_PIN_PC4 PINCTRL_PIN(PC_BASE + 4, "PC4") +#define SUNXI_PINCTRL_PIN_PC5 PINCTRL_PIN(PC_BASE + 5, "PC5") +#define SUNXI_PINCTRL_PIN_PC6 PINCTRL_PIN(PC_BASE + 6, "PC6") +#define SUNXI_PINCTRL_PIN_PC7 PINCTRL_PIN(PC_BASE + 7, "PC7") +#define SUNXI_PINCTRL_PIN_PC8 PINCTRL_PIN(PC_BASE + 8, "PC8") +#define SUNXI_PINCTRL_PIN_PC9 PINCTRL_PIN(PC_BASE + 9, "PC9") +#define SUNXI_PINCTRL_PIN_PC10 PINCTRL_PIN(PC_BASE + 10, "PC10") +#define SUNXI_PINCTRL_PIN_PC11 PINCTRL_PIN(PC_BASE + 11, "PC11") +#define SUNXI_PINCTRL_PIN_PC12 PINCTRL_PIN(PC_BASE + 12, "PC12") +#define SUNXI_PINCTRL_PIN_PC13 PINCTRL_PIN(PC_BASE + 13, "PC13") +#define SUNXI_PINCTRL_PIN_PC14 PINCTRL_PIN(PC_BASE + 14, "PC14") +#define SUNXI_PINCTRL_PIN_PC15 PINCTRL_PIN(PC_BASE + 15, "PC15") +#define SUNXI_PINCTRL_PIN_PC16 PINCTRL_PIN(PC_BASE + 16, "PC16") +#define SUNXI_PINCTRL_PIN_PC17 PINCTRL_PIN(PC_BASE + 17, "PC17") +#define SUNXI_PINCTRL_PIN_PC18 PINCTRL_PIN(PC_BASE + 18, "PC18") +#define SUNXI_PINCTRL_PIN_PC19 PINCTRL_PIN(PC_BASE + 19, "PC19") +#define SUNXI_PINCTRL_PIN_PC20 PINCTRL_PIN(PC_BASE + 20, "PC20") +#define SUNXI_PINCTRL_PIN_PC21 PINCTRL_PIN(PC_BASE + 21, "PC21") +#define SUNXI_PINCTRL_PIN_PC22 PINCTRL_PIN(PC_BASE + 22, "PC22") +#define SUNXI_PINCTRL_PIN_PC23 PINCTRL_PIN(PC_BASE + 23, "PC23") +#define SUNXI_PINCTRL_PIN_PC24 PINCTRL_PIN(PC_BASE + 24, "PC24") +#define SUNXI_PINCTRL_PIN_PC25 PINCTRL_PIN(PC_BASE + 25, "PC25") +#define SUNXI_PINCTRL_PIN_PC26 PINCTRL_PIN(PC_BASE + 26, "PC26") +#define SUNXI_PINCTRL_PIN_PC27 PINCTRL_PIN(PC_BASE + 27, "PC27") +#define SUNXI_PINCTRL_PIN_PC28 PINCTRL_PIN(PC_BASE + 28, "PC28") +#define SUNXI_PINCTRL_PIN_PC29 PINCTRL_PIN(PC_BASE + 29, "PC29") +#define SUNXI_PINCTRL_PIN_PC30 PINCTRL_PIN(PC_BASE + 30, "PC30") +#define SUNXI_PINCTRL_PIN_PC31 PINCTRL_PIN(PC_BASE + 31, "PC31") + +#define SUNXI_PINCTRL_PIN_PD0 PINCTRL_PIN(PD_BASE + 0, "PD0") +#define SUNXI_PINCTRL_PIN_PD1 PINCTRL_PIN(PD_BASE + 1, "PD1") +#define SUNXI_PINCTRL_PIN_PD2 PINCTRL_PIN(PD_BASE + 2, "PD2") +#define SUNXI_PINCTRL_PIN_PD3 PINCTRL_PIN(PD_BASE + 3, "PD3") +#define SUNXI_PINCTRL_PIN_PD4 PINCTRL_PIN(PD_BASE + 4, "PD4") +#define SUNXI_PINCTRL_PIN_PD5 PINCTRL_PIN(PD_BASE + 5, "PD5") +#define SUNXI_PINCTRL_PIN_PD6 PINCTRL_PIN(PD_BASE + 6, "PD6") +#define SUNXI_PINCTRL_PIN_PD7 PINCTRL_PIN(PD_BASE + 7, "PD7") +#define SUNXI_PINCTRL_PIN_PD8 PINCTRL_PIN(PD_BASE + 8, "PD8") +#define SUNXI_PINCTRL_PIN_PD9 PINCTRL_PIN(PD_BASE + 9, "PD9") +#define SUNXI_PINCTRL_PIN_PD10 PINCTRL_PIN(PD_BASE + 10, "PD10") +#define SUNXI_PINCTRL_PIN_PD11 PINCTRL_PIN(PD_BASE + 11, "PD11") +#define SUNXI_PINCTRL_PIN_PD12 PINCTRL_PIN(PD_BASE + 12, "PD12") +#define SUNXI_PINCTRL_PIN_PD13 PINCTRL_PIN(PD_BASE + 13, "PD13") +#define SUNXI_PINCTRL_PIN_PD14 PINCTRL_PIN(PD_BASE + 14, "PD14") +#define SUNXI_PINCTRL_PIN_PD15 PINCTRL_PIN(PD_BASE + 15, "PD15") +#define SUNXI_PINCTRL_PIN_PD16 PINCTRL_PIN(PD_BASE + 16, "PD16") +#define SUNXI_PINCTRL_PIN_PD17 PINCTRL_PIN(PD_BASE + 17, "PD17") +#define SUNXI_PINCTRL_PIN_PD18 PINCTRL_PIN(PD_BASE + 18, "PD18") +#define SUNXI_PINCTRL_PIN_PD19 PINCTRL_PIN(PD_BASE + 19, "PD19") +#define SUNXI_PINCTRL_PIN_PD20 PINCTRL_PIN(PD_BASE + 20, "PD20") +#define SUNXI_PINCTRL_PIN_PD21 PINCTRL_PIN(PD_BASE + 21, "PD21") +#define SUNXI_PINCTRL_PIN_PD22 PINCTRL_PIN(PD_BASE + 22, "PD22") +#define SUNXI_PINCTRL_PIN_PD23 PINCTRL_PIN(PD_BASE + 23, "PD23") +#define SUNXI_PINCTRL_PIN_PD24 PINCTRL_PIN(PD_BASE + 24, "PD24") +#define SUNXI_PINCTRL_PIN_PD25 PINCTRL_PIN(PD_BASE + 25, "PD25") +#define SUNXI_PINCTRL_PIN_PD26 PINCTRL_PIN(PD_BASE + 26, "PD26") +#define SUNXI_PINCTRL_PIN_PD27 PINCTRL_PIN(PD_BASE + 27, "PD27") +#define SUNXI_PINCTRL_PIN_PD28 PINCTRL_PIN(PD_BASE + 28, "PD28") +#define SUNXI_PINCTRL_PIN_PD29 PINCTRL_PIN(PD_BASE + 29, "PD29") +#define SUNXI_PINCTRL_PIN_PD30 PINCTRL_PIN(PD_BASE + 30, "PD30") +#define SUNXI_PINCTRL_PIN_PD31 PINCTRL_PIN(PD_BASE + 31, "PD31") + +#define SUNXI_PINCTRL_PIN_PE0 PINCTRL_PIN(PE_BASE + 0, "PE0") +#define SUNXI_PINCTRL_PIN_PE1 PINCTRL_PIN(PE_BASE + 1, "PE1") +#define SUNXI_PINCTRL_PIN_PE2 PINCTRL_PIN(PE_BASE + 2, "PE2") +#define SUNXI_PINCTRL_PIN_PE3 PINCTRL_PIN(PE_BASE + 3, "PE3") +#define SUNXI_PINCTRL_PIN_PE4 PINCTRL_PIN(PE_BASE + 4, "PE4") +#define SUNXI_PINCTRL_PIN_PE5 PINCTRL_PIN(PE_BASE + 5, "PE5") +#define SUNXI_PINCTRL_PIN_PE6 PINCTRL_PIN(PE_BASE + 6, "PE6") +#define SUNXI_PINCTRL_PIN_PE7 PINCTRL_PIN(PE_BASE + 7, "PE7") +#define SUNXI_PINCTRL_PIN_PE8 PINCTRL_PIN(PE_BASE + 8, "PE8") +#define SUNXI_PINCTRL_PIN_PE9 PINCTRL_PIN(PE_BASE + 9, "PE9") +#define SUNXI_PINCTRL_PIN_PE10 PINCTRL_PIN(PE_BASE + 10, "PE10") +#define SUNXI_PINCTRL_PIN_PE11 PINCTRL_PIN(PE_BASE + 11, "PE11") +#define SUNXI_PINCTRL_PIN_PE12 PINCTRL_PIN(PE_BASE + 12, "PE12") +#define SUNXI_PINCTRL_PIN_PE13 PINCTRL_PIN(PE_BASE + 13, "PE13") +#define SUNXI_PINCTRL_PIN_PE14 PINCTRL_PIN(PE_BASE + 14, "PE14") +#define SUNXI_PINCTRL_PIN_PE15 PINCTRL_PIN(PE_BASE + 15, "PE15") +#define SUNXI_PINCTRL_PIN_PE16 PINCTRL_PIN(PE_BASE + 16, "PE16") +#define SUNXI_PINCTRL_PIN_PE17 PINCTRL_PIN(PE_BASE + 17, "PE17") +#define SUNXI_PINCTRL_PIN_PE18 PINCTRL_PIN(PE_BASE + 18, "PE18") +#define SUNXI_PINCTRL_PIN_PE19 PINCTRL_PIN(PE_BASE + 19, "PE19") +#define SUNXI_PINCTRL_PIN_PE20 PINCTRL_PIN(PE_BASE + 20, "PE20") +#define SUNXI_PINCTRL_PIN_PE21 PINCTRL_PIN(PE_BASE + 21, "PE21") +#define SUNXI_PINCTRL_PIN_PE22 PINCTRL_PIN(PE_BASE + 22, "PE22") +#define SUNXI_PINCTRL_PIN_PE23 PINCTRL_PIN(PE_BASE + 23, "PE23") +#define SUNXI_PINCTRL_PIN_PE24 PINCTRL_PIN(PE_BASE + 24, "PE24") +#define SUNXI_PINCTRL_PIN_PE25 PINCTRL_PIN(PE_BASE + 25, "PE25") +#define SUNXI_PINCTRL_PIN_PE26 PINCTRL_PIN(PE_BASE + 26, "PE26") +#define SUNXI_PINCTRL_PIN_PE27 PINCTRL_PIN(PE_BASE + 27, "PE27") +#define SUNXI_PINCTRL_PIN_PE28 PINCTRL_PIN(PE_BASE + 28, "PE28") +#define SUNXI_PINCTRL_PIN_PE29 PINCTRL_PIN(PE_BASE + 29, "PE29") +#define SUNXI_PINCTRL_PIN_PE30 PINCTRL_PIN(PE_BASE + 30, "PE30") +#define SUNXI_PINCTRL_PIN_PE31 PINCTRL_PIN(PE_BASE + 31, "PE31") + +#define SUNXI_PINCTRL_PIN_PF0 PINCTRL_PIN(PF_BASE + 0, "PF0") +#define SUNXI_PINCTRL_PIN_PF1 PINCTRL_PIN(PF_BASE + 1, "PF1") +#define SUNXI_PINCTRL_PIN_PF2 PINCTRL_PIN(PF_BASE + 2, "PF2") +#define SUNXI_PINCTRL_PIN_PF3 PINCTRL_PIN(PF_BASE + 3, "PF3") +#define SUNXI_PINCTRL_PIN_PF4 PINCTRL_PIN(PF_BASE + 4, "PF4") +#define SUNXI_PINCTRL_PIN_PF5 PINCTRL_PIN(PF_BASE + 5, "PF5") +#define SUNXI_PINCTRL_PIN_PF6 PINCTRL_PIN(PF_BASE + 6, "PF6") +#define SUNXI_PINCTRL_PIN_PF7 PINCTRL_PIN(PF_BASE + 7, "PF7") +#define SUNXI_PINCTRL_PIN_PF8 PINCTRL_PIN(PF_BASE + 8, "PF8") +#define SUNXI_PINCTRL_PIN_PF9 PINCTRL_PIN(PF_BASE + 9, "PF9") +#define SUNXI_PINCTRL_PIN_PF10 PINCTRL_PIN(PF_BASE + 10, "PF10") +#define SUNXI_PINCTRL_PIN_PF11 PINCTRL_PIN(PF_BASE + 11, "PF11") +#define SUNXI_PINCTRL_PIN_PF12 PINCTRL_PIN(PF_BASE + 12, "PF12") +#define SUNXI_PINCTRL_PIN_PF13 PINCTRL_PIN(PF_BASE + 13, "PF13") +#define SUNXI_PINCTRL_PIN_PF14 PINCTRL_PIN(PF_BASE + 14, "PF14") +#define SUNXI_PINCTRL_PIN_PF15 PINCTRL_PIN(PF_BASE + 15, "PF15") +#define SUNXI_PINCTRL_PIN_PF16 PINCTRL_PIN(PF_BASE + 16, "PF16") +#define SUNXI_PINCTRL_PIN_PF17 PINCTRL_PIN(PF_BASE + 17, "PF17") +#define SUNXI_PINCTRL_PIN_PF18 PINCTRL_PIN(PF_BASE + 18, "PF18") +#define SUNXI_PINCTRL_PIN_PF19 PINCTRL_PIN(PF_BASE + 19, "PF19") +#define SUNXI_PINCTRL_PIN_PF20 PINCTRL_PIN(PF_BASE + 20, "PF20") +#define SUNXI_PINCTRL_PIN_PF21 PINCTRL_PIN(PF_BASE + 21, "PF21") +#define SUNXI_PINCTRL_PIN_PF22 PINCTRL_PIN(PF_BASE + 22, "PF22") +#define SUNXI_PINCTRL_PIN_PF23 PINCTRL_PIN(PF_BASE + 23, "PF23") +#define SUNXI_PINCTRL_PIN_PF24 PINCTRL_PIN(PF_BASE + 24, "PF24") +#define SUNXI_PINCTRL_PIN_PF25 PINCTRL_PIN(PF_BASE + 25, "PF25") +#define SUNXI_PINCTRL_PIN_PF26 PINCTRL_PIN(PF_BASE + 26, "PF26") +#define SUNXI_PINCTRL_PIN_PF27 PINCTRL_PIN(PF_BASE + 27, "PF27") +#define SUNXI_PINCTRL_PIN_PF28 PINCTRL_PIN(PF_BASE + 28, "PF28") +#define SUNXI_PINCTRL_PIN_PF29 PINCTRL_PIN(PF_BASE + 29, "PF29") +#define SUNXI_PINCTRL_PIN_PF30 PINCTRL_PIN(PF_BASE + 30, "PF30") +#define SUNXI_PINCTRL_PIN_PF31 PINCTRL_PIN(PF_BASE + 31, "PF31") + +#define SUNXI_PINCTRL_PIN_PG0 PINCTRL_PIN(PG_BASE + 0, "PG0") +#define SUNXI_PINCTRL_PIN_PG1 PINCTRL_PIN(PG_BASE + 1, "PG1") +#define SUNXI_PINCTRL_PIN_PG2 PINCTRL_PIN(PG_BASE + 2, "PG2") +#define SUNXI_PINCTRL_PIN_PG3 PINCTRL_PIN(PG_BASE + 3, "PG3") +#define SUNXI_PINCTRL_PIN_PG4 PINCTRL_PIN(PG_BASE + 4, "PG4") +#define SUNXI_PINCTRL_PIN_PG5 PINCTRL_PIN(PG_BASE + 5, "PG5") +#define SUNXI_PINCTRL_PIN_PG6 PINCTRL_PIN(PG_BASE + 6, "PG6") +#define SUNXI_PINCTRL_PIN_PG7 PINCTRL_PIN(PG_BASE + 7, "PG7") +#define SUNXI_PINCTRL_PIN_PG8 PINCTRL_PIN(PG_BASE + 8, "PG8") +#define SUNXI_PINCTRL_PIN_PG9 PINCTRL_PIN(PG_BASE + 9, "PG9") +#define SUNXI_PINCTRL_PIN_PG10 PINCTRL_PIN(PG_BASE + 10, "PG10") +#define SUNXI_PINCTRL_PIN_PG11 PINCTRL_PIN(PG_BASE + 11, "PG11") +#define SUNXI_PINCTRL_PIN_PG12 PINCTRL_PIN(PG_BASE + 12, "PG12") +#define SUNXI_PINCTRL_PIN_PG13 PINCTRL_PIN(PG_BASE + 13, "PG13") +#define SUNXI_PINCTRL_PIN_PG14 PINCTRL_PIN(PG_BASE + 14, "PG14") +#define SUNXI_PINCTRL_PIN_PG15 PINCTRL_PIN(PG_BASE + 15, "PG15") +#define SUNXI_PINCTRL_PIN_PG16 PINCTRL_PIN(PG_BASE + 16, "PG16") +#define SUNXI_PINCTRL_PIN_PG17 PINCTRL_PIN(PG_BASE + 17, "PG17") +#define SUNXI_PINCTRL_PIN_PG18 PINCTRL_PIN(PG_BASE + 18, "PG18") +#define SUNXI_PINCTRL_PIN_PG19 PINCTRL_PIN(PG_BASE + 19, "PG19") +#define SUNXI_PINCTRL_PIN_PG20 PINCTRL_PIN(PG_BASE + 20, "PG20") +#define SUNXI_PINCTRL_PIN_PG21 PINCTRL_PIN(PG_BASE + 21, "PG21") +#define SUNXI_PINCTRL_PIN_PG22 PINCTRL_PIN(PG_BASE + 22, "PG22") +#define SUNXI_PINCTRL_PIN_PG23 PINCTRL_PIN(PG_BASE + 23, "PG23") +#define SUNXI_PINCTRL_PIN_PG24 PINCTRL_PIN(PG_BASE + 24, "PG24") +#define SUNXI_PINCTRL_PIN_PG25 PINCTRL_PIN(PG_BASE + 25, "PG25") +#define SUNXI_PINCTRL_PIN_PG26 PINCTRL_PIN(PG_BASE + 26, "PG26") +#define SUNXI_PINCTRL_PIN_PG27 PINCTRL_PIN(PG_BASE + 27, "PG27") +#define SUNXI_PINCTRL_PIN_PG28 PINCTRL_PIN(PG_BASE + 28, "PG28") +#define SUNXI_PINCTRL_PIN_PG29 PINCTRL_PIN(PG_BASE + 29, "PG29") +#define SUNXI_PINCTRL_PIN_PG30 PINCTRL_PIN(PG_BASE + 30, "PG30") +#define SUNXI_PINCTRL_PIN_PG31 PINCTRL_PIN(PG_BASE + 31, "PG31") + +#define SUNXI_PINCTRL_PIN_PH0 PINCTRL_PIN(PH_BASE + 0, "PH0") +#define SUNXI_PINCTRL_PIN_PH1 PINCTRL_PIN(PH_BASE + 1, "PH1") +#define SUNXI_PINCTRL_PIN_PH2 PINCTRL_PIN(PH_BASE + 2, "PH2") +#define SUNXI_PINCTRL_PIN_PH3 PINCTRL_PIN(PH_BASE + 3, "PH3") +#define SUNXI_PINCTRL_PIN_PH4 PINCTRL_PIN(PH_BASE + 4, "PH4") +#define SUNXI_PINCTRL_PIN_PH5 PINCTRL_PIN(PH_BASE + 5, "PH5") +#define SUNXI_PINCTRL_PIN_PH6 PINCTRL_PIN(PH_BASE + 6, "PH6") +#define SUNXI_PINCTRL_PIN_PH7 PINCTRL_PIN(PH_BASE + 7, "PH7") +#define SUNXI_PINCTRL_PIN_PH8 PINCTRL_PIN(PH_BASE + 8, "PH8") +#define SUNXI_PINCTRL_PIN_PH9 PINCTRL_PIN(PH_BASE + 9, "PH9") +#define SUNXI_PINCTRL_PIN_PH10 PINCTRL_PIN(PH_BASE + 10, "PH10") +#define SUNXI_PINCTRL_PIN_PH11 PINCTRL_PIN(PH_BASE + 11, "PH11") +#define SUNXI_PINCTRL_PIN_PH12 PINCTRL_PIN(PH_BASE + 12, "PH12") +#define SUNXI_PINCTRL_PIN_PH13 PINCTRL_PIN(PH_BASE + 13, "PH13") +#define SUNXI_PINCTRL_PIN_PH14 PINCTRL_PIN(PH_BASE + 14, "PH14") +#define SUNXI_PINCTRL_PIN_PH15 PINCTRL_PIN(PH_BASE + 15, "PH15") +#define SUNXI_PINCTRL_PIN_PH16 PINCTRL_PIN(PH_BASE + 16, "PH16") +#define SUNXI_PINCTRL_PIN_PH17 PINCTRL_PIN(PH_BASE + 17, "PH17") +#define SUNXI_PINCTRL_PIN_PH18 PINCTRL_PIN(PH_BASE + 18, "PH18") +#define SUNXI_PINCTRL_PIN_PH19 PINCTRL_PIN(PH_BASE + 19, "PH19") +#define SUNXI_PINCTRL_PIN_PH20 PINCTRL_PIN(PH_BASE + 20, "PH20") +#define SUNXI_PINCTRL_PIN_PH21 PINCTRL_PIN(PH_BASE + 21, "PH21") +#define SUNXI_PINCTRL_PIN_PH22 PINCTRL_PIN(PH_BASE + 22, "PH22") +#define SUNXI_PINCTRL_PIN_PH23 PINCTRL_PIN(PH_BASE + 23, "PH23") +#define SUNXI_PINCTRL_PIN_PH24 PINCTRL_PIN(PH_BASE + 24, "PH24") +#define SUNXI_PINCTRL_PIN_PH25 PINCTRL_PIN(PH_BASE + 25, "PH25") +#define SUNXI_PINCTRL_PIN_PH26 PINCTRL_PIN(PH_BASE + 26, "PH26") +#define SUNXI_PINCTRL_PIN_PH27 PINCTRL_PIN(PH_BASE + 27, "PH27") +#define SUNXI_PINCTRL_PIN_PH28 PINCTRL_PIN(PH_BASE + 28, "PH28") +#define SUNXI_PINCTRL_PIN_PH29 PINCTRL_PIN(PH_BASE + 29, "PH29") +#define SUNXI_PINCTRL_PIN_PH30 PINCTRL_PIN(PH_BASE + 30, "PH30") +#define SUNXI_PINCTRL_PIN_PH31 PINCTRL_PIN(PH_BASE + 31, "PH31") + +#define SUNXI_PINCTRL_PIN_PI0 PINCTRL_PIN(PI_BASE + 0, "PI0") +#define SUNXI_PINCTRL_PIN_PI1 PINCTRL_PIN(PI_BASE + 1, "PI1") +#define SUNXI_PINCTRL_PIN_PI2 PINCTRL_PIN(PI_BASE + 2, "PI2") +#define SUNXI_PINCTRL_PIN_PI3 PINCTRL_PIN(PI_BASE + 3, "PI3") +#define SUNXI_PINCTRL_PIN_PI4 PINCTRL_PIN(PI_BASE + 4, "PI4") +#define SUNXI_PINCTRL_PIN_PI5 PINCTRL_PIN(PI_BASE + 5, "PI5") +#define SUNXI_PINCTRL_PIN_PI6 PINCTRL_PIN(PI_BASE + 6, "PI6") +#define SUNXI_PINCTRL_PIN_PI7 PINCTRL_PIN(PI_BASE + 7, "PI7") +#define SUNXI_PINCTRL_PIN_PI8 PINCTRL_PIN(PI_BASE + 8, "PI8") +#define SUNXI_PINCTRL_PIN_PI9 PINCTRL_PIN(PI_BASE + 9, "PI9") +#define SUNXI_PINCTRL_PIN_PI10 PINCTRL_PIN(PI_BASE + 10, "PI10") +#define SUNXI_PINCTRL_PIN_PI11 PINCTRL_PIN(PI_BASE + 11, "PI11") +#define SUNXI_PINCTRL_PIN_PI12 PINCTRL_PIN(PI_BASE + 12, "PI12") +#define SUNXI_PINCTRL_PIN_PI13 PINCTRL_PIN(PI_BASE + 13, "PI13") +#define SUNXI_PINCTRL_PIN_PI14 PINCTRL_PIN(PI_BASE + 14, "PI14") +#define SUNXI_PINCTRL_PIN_PI15 PINCTRL_PIN(PI_BASE + 15, "PI15") +#define SUNXI_PINCTRL_PIN_PI16 PINCTRL_PIN(PI_BASE + 16, "PI16") +#define SUNXI_PINCTRL_PIN_PI17 PINCTRL_PIN(PI_BASE + 17, "PI17") +#define SUNXI_PINCTRL_PIN_PI18 PINCTRL_PIN(PI_BASE + 18, "PI18") +#define SUNXI_PINCTRL_PIN_PI19 PINCTRL_PIN(PI_BASE + 19, "PI19") +#define SUNXI_PINCTRL_PIN_PI20 PINCTRL_PIN(PI_BASE + 20, "PI20") +#define SUNXI_PINCTRL_PIN_PI21 PINCTRL_PIN(PI_BASE + 21, "PI21") +#define SUNXI_PINCTRL_PIN_PI22 PINCTRL_PIN(PI_BASE + 22, "PI22") +#define SUNXI_PINCTRL_PIN_PI23 PINCTRL_PIN(PI_BASE + 23, "PI23") +#define SUNXI_PINCTRL_PIN_PI24 PINCTRL_PIN(PI_BASE + 24, "PI24") +#define SUNXI_PINCTRL_PIN_PI25 PINCTRL_PIN(PI_BASE + 25, "PI25") +#define SUNXI_PINCTRL_PIN_PI26 PINCTRL_PIN(PI_BASE + 26, "PI26") +#define SUNXI_PINCTRL_PIN_PI27 PINCTRL_PIN(PI_BASE + 27, "PI27") +#define SUNXI_PINCTRL_PIN_PI28 PINCTRL_PIN(PI_BASE + 28, "PI28") +#define SUNXI_PINCTRL_PIN_PI29 PINCTRL_PIN(PI_BASE + 29, "PI29") +#define SUNXI_PINCTRL_PIN_PI30 PINCTRL_PIN(PI_BASE + 30, "PI30") +#define SUNXI_PINCTRL_PIN_PI31 PINCTRL_PIN(PI_BASE + 31, "PI31") + +#define SUNXI_PIN_NAME_MAX_LEN 5 + +#define BANK_MEM_SIZE 0x24 +#define MUX_REGS_OFFSET 0x0 +#define DATA_REGS_OFFSET 0x10 +#define DLEVEL_REGS_OFFSET 0x14 +#define PULL_REGS_OFFSET 0x1c + +#define PINS_PER_BANK 32 +#define MUX_PINS_PER_REG 8 +#define MUX_PINS_BITS 4 +#define MUX_PINS_MASK 0x0f +#define DATA_PINS_PER_REG 32 +#define DATA_PINS_BITS 1 +#define DATA_PINS_MASK 0x01 +#define DLEVEL_PINS_PER_REG 16 +#define DLEVEL_PINS_BITS 2 +#define DLEVEL_PINS_MASK 0x03 +#define PULL_PINS_PER_REG 16 +#define PULL_PINS_BITS 2 +#define PULL_PINS_MASK 0x03 + +struct sunxi_desc_function { + const char *name; + u8 muxval; +}; + +struct sunxi_desc_pin { + struct pinctrl_pin_desc pin; + struct sunxi_desc_function *functions; +}; + +struct sunxi_pinctrl_desc { + const struct sunxi_desc_pin *pins; + int npins; + struct pinctrl_gpio_range *ranges; + int nranges; +}; + +struct sunxi_pinctrl_function { + const char *name; + const char **groups; + unsigned ngroups; +}; + +struct sunxi_pinctrl_group { + const char *name; + unsigned long config; + unsigned pin; +}; + +struct sunxi_pinctrl { + void __iomem *membase; + struct gpio_chip *chip; + struct sunxi_pinctrl_desc *desc; + struct device *dev; + struct sunxi_pinctrl_function *functions; + unsigned nfunctions; + struct sunxi_pinctrl_group *groups; + unsigned ngroups; + struct pinctrl_dev *pctl_dev; +}; + +#define SUNXI_PIN(_pin, ...) \ + { \ + .pin = _pin, \ + .functions = (struct sunxi_desc_function[]){ \ + __VA_ARGS__, { } }, \ + } + +#define SUNXI_FUNCTION(_val, _name) \ + { \ + .name = _name, \ + .muxval = _val, \ + } + +/* + * The sunXi PIO registers are organized as is: + * 0x00 - 0x0c Muxing values. + * 8 pins per register, each pin having a 4bits value + * 0x10 Pin values + * 32 bits per register, each pin corresponding to one bit + * 0x14 - 0x18 Drive level + * 16 pins per register, each pin having a 2bits value + * 0x1c - 0x20 Pull-Up values + * 16 pins per register, each pin having a 2bits value + * + * This is for the first bank. Each bank will have the same layout, + * with an offset being a multiple of 0x24. + * + * The following functions calculate from the pin number the register + * and the bit offset that we should access. + */ +static inline u32 sunxi_mux_reg(u16 pin) +{ + u8 bank = pin / PINS_PER_BANK; + u32 offset = bank * BANK_MEM_SIZE; + offset += MUX_REGS_OFFSET; + offset += pin % PINS_PER_BANK / MUX_PINS_PER_REG * 0x04; + return round_down(offset, 4); +} + +static inline u32 sunxi_mux_offset(u16 pin) +{ + u32 pin_num = pin % MUX_PINS_PER_REG; + return pin_num * MUX_PINS_BITS; +} + +static inline u32 sunxi_data_reg(u16 pin) +{ + u8 bank = pin / PINS_PER_BANK; + u32 offset = bank * BANK_MEM_SIZE; + offset += DATA_REGS_OFFSET; + offset += pin % PINS_PER_BANK / DATA_PINS_PER_REG * 0x04; + return round_down(offset, 4); +} + +static inline u32 sunxi_data_offset(u16 pin) +{ + u32 pin_num = pin % DATA_PINS_PER_REG; + return pin_num * DATA_PINS_BITS; +} + +static inline u32 sunxi_dlevel_reg(u16 pin) +{ + u8 bank = pin / PINS_PER_BANK; + u32 offset = bank * BANK_MEM_SIZE; + offset += DLEVEL_REGS_OFFSET; + offset += pin % PINS_PER_BANK / DLEVEL_PINS_PER_REG * 0x04; + return round_down(offset, 4); +} + +static inline u32 sunxi_dlevel_offset(u16 pin) +{ + u32 pin_num = pin % DLEVEL_PINS_PER_REG; + return pin_num * DLEVEL_PINS_BITS; +} + +static inline u32 sunxi_pull_reg(u16 pin) +{ + u8 bank = pin / PINS_PER_BANK; + u32 offset = bank * BANK_MEM_SIZE; + offset += PULL_REGS_OFFSET; + offset += pin % PINS_PER_BANK / PULL_PINS_PER_REG * 0x04; + return round_down(offset, 4); +} + +static inline u32 sunxi_pull_offset(u16 pin) +{ + u32 pin_num = pin % PULL_PINS_PER_REG; + return pin_num * PULL_PINS_BITS; +} + +#endif /* __PINCTRL_SUNXI_H */ diff --git a/drivers/pinctrl/pinctrl-tegra.c b/drivers/pinctrl/pinctrl-tegra.c index ae1e4bb3259d..f195d77a3572 100644 --- a/drivers/pinctrl/pinctrl-tegra.c +++ b/drivers/pinctrl/pinctrl-tegra.c @@ -201,6 +201,7 @@ static const struct cfg_param { {"nvidia,open-drain", TEGRA_PINCONF_PARAM_OPEN_DRAIN}, {"nvidia,lock", TEGRA_PINCONF_PARAM_LOCK}, {"nvidia,io-reset", TEGRA_PINCONF_PARAM_IORESET}, + {"nvidia,rcv-sel", TEGRA_PINCONF_PARAM_RCV_SEL}, {"nvidia,high-speed-mode", TEGRA_PINCONF_PARAM_HIGH_SPEED_MODE}, {"nvidia,schmitt", TEGRA_PINCONF_PARAM_SCHMITT}, {"nvidia,low-power-mode", TEGRA_PINCONF_PARAM_LOW_POWER_MODE}, @@ -208,6 +209,7 @@ static const struct cfg_param { {"nvidia,pull-up-strength", TEGRA_PINCONF_PARAM_DRIVE_UP_STRENGTH}, {"nvidia,slew-rate-falling", TEGRA_PINCONF_PARAM_SLEW_RATE_FALLING}, {"nvidia,slew-rate-rising", TEGRA_PINCONF_PARAM_SLEW_RATE_RISING}, + {"nvidia,drive-type", TEGRA_PINCONF_PARAM_DRIVE_TYPE}, }; static int tegra_pinctrl_dt_subnode_to_map(struct device *dev, @@ -450,6 +452,12 @@ static int tegra_pinconf_reg(struct tegra_pmx *pmx, *bit = g->ioreset_bit; *width = 1; break; + case TEGRA_PINCONF_PARAM_RCV_SEL: + *bank = g->rcv_sel_bank; + *reg = g->rcv_sel_reg; + *bit = g->rcv_sel_bit; + *width = 1; + break; case TEGRA_PINCONF_PARAM_HIGH_SPEED_MODE: *bank = g->drv_bank; *reg = g->drv_reg; @@ -492,6 +500,12 @@ static int tegra_pinconf_reg(struct tegra_pmx *pmx, *bit = g->slwr_bit; *width = g->slwr_width; break; + case TEGRA_PINCONF_PARAM_DRIVE_TYPE: + *bank = g->drvtype_bank; + *reg = g->drvtype_reg; + *bit = g->drvtype_bit; + *width = 2; + break; default: dev_err(pmx->dev, "Invalid config param %04x\n", param); return -ENOTSUPP; diff --git a/drivers/pinctrl/pinctrl-tegra.h b/drivers/pinctrl/pinctrl-tegra.h index 62e380965c68..817f7061dc4c 100644 --- a/drivers/pinctrl/pinctrl-tegra.h +++ b/drivers/pinctrl/pinctrl-tegra.h @@ -30,6 +30,8 @@ enum tegra_pinconf_param { /* argument: Boolean */ TEGRA_PINCONF_PARAM_IORESET, /* argument: Boolean */ + TEGRA_PINCONF_PARAM_RCV_SEL, + /* argument: Boolean */ TEGRA_PINCONF_PARAM_HIGH_SPEED_MODE, /* argument: Boolean */ TEGRA_PINCONF_PARAM_SCHMITT, @@ -43,6 +45,8 @@ enum tegra_pinconf_param { TEGRA_PINCONF_PARAM_SLEW_RATE_FALLING, /* argument: Integer, range is HW-dependant */ TEGRA_PINCONF_PARAM_SLEW_RATE_RISING, + /* argument: Integer, range is HW-dependant */ + TEGRA_PINCONF_PARAM_DRIVE_TYPE, }; enum tegra_pinconf_pull { @@ -95,6 +99,9 @@ struct tegra_function { * @ioreset_reg: IO reset register offset. -1 if unsupported. * @ioreset_bank: IO reset register bank. 0 if unsupported. * @ioreset_bit: IO reset register bit. 0 if unsupported. + * @rcv_sel_reg: Receiver select offset. -1 if unsupported. + * @rcv_sel_bank: Receiver select bank. 0 if unsupported. + * @rcv_sel_bit: Receiver select bit. 0 if unsupported. * @drv_reg: Drive fields register offset. -1 if unsupported. * This register contains the hsm, schmitt, lpmd, drvdn, * drvup, slwr, and slwf parameters. @@ -110,6 +117,9 @@ struct tegra_function { * @slwr_width: Slew Rising field width. 0 if unsupported. * @slwf_bit: Slew Falling register bit. 0 if unsupported. * @slwf_width: Slew Falling field width. 0 if unsupported. + * @drvtype_reg: Drive type fields register offset. -1 if unsupported. + * @drvtype_bank: Drive type fields register bank. 0 if unsupported. + * @drvtype_bit: Drive type register bit. 0 if unsupported. * * A representation of a group of pins (possibly just one pin) in the Tegra * pin controller. Each group allows some parameter or parameters to be @@ -131,15 +141,19 @@ struct tegra_pingroup { s16 odrain_reg; s16 lock_reg; s16 ioreset_reg; + s16 rcv_sel_reg; s16 drv_reg; + s16 drvtype_reg; u32 mux_bank:2; u32 pupd_bank:2; u32 tri_bank:2; u32 einput_bank:2; u32 odrain_bank:2; u32 ioreset_bank:2; + u32 rcv_sel_bank:2; u32 lock_bank:2; u32 drv_bank:2; + u32 drvtype_bank:2; u32 mux_bit:5; u32 pupd_bit:5; u32 tri_bit:5; @@ -147,6 +161,7 @@ struct tegra_pingroup { u32 odrain_bit:5; u32 lock_bit:5; u32 ioreset_bit:5; + u32 rcv_sel_bit:5; u32 hsm_bit:5; u32 schmitt_bit:5; u32 lpmd_bit:5; @@ -154,6 +169,7 @@ struct tegra_pingroup { u32 drvup_bit:5; u32 slwr_bit:5; u32 slwf_bit:5; + u32 drvtype_bit:5; u32 drvdn_width:6; u32 drvup_width:6; u32 slwr_width:6; diff --git a/drivers/pinctrl/pinctrl-tegra114.c b/drivers/pinctrl/pinctrl-tegra114.c new file mode 100644 index 000000000000..622c4854977e --- /dev/null +++ b/drivers/pinctrl/pinctrl-tegra114.c @@ -0,0 +1,2769 @@ +/* + * Pinctrl data and driver for the NVIDIA Tegra114 pinmux + * + * Copyright (c) 2012-2013, NVIDIA CORPORATION. All rights reserved. + * + * Arthur: Pritesh Raithatha <praithatha@nvidia.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + */ + +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/pinctrl/pinctrl.h> +#include <linux/pinctrl/pinmux.h> + +#include "pinctrl-tegra.h" + +/* + * Most pins affected by the pinmux can also be GPIOs. Define these first. + * These must match how the GPIO driver names/numbers its pins. + */ +#define _GPIO(offset) (offset) + +#define TEGRA_PIN_CLK_32K_OUT_PA0 _GPIO(0) +#define TEGRA_PIN_UART3_CTS_N_PA1 _GPIO(1) +#define TEGRA_PIN_DAP2_FS_PA2 _GPIO(2) +#define TEGRA_PIN_DAP2_SCLK_PA3 _GPIO(3) +#define TEGRA_PIN_DAP2_DIN_PA4 _GPIO(4) +#define TEGRA_PIN_DAP2_DOUT_PA5 _GPIO(5) +#define TEGRA_PIN_SDMMC3_CLK_PA6 _GPIO(6) +#define TEGRA_PIN_SDMMC3_CMD_PA7 _GPIO(7) +#define TEGRA_PIN_GMI_A17_PB0 _GPIO(8) +#define TEGRA_PIN_GMI_A18_PB1 _GPIO(9) +#define TEGRA_PIN_SDMMC3_DAT3_PB4 _GPIO(12) +#define TEGRA_PIN_SDMMC3_DAT2_PB5 _GPIO(13) +#define TEGRA_PIN_SDMMC3_DAT1_PB6 _GPIO(14) +#define TEGRA_PIN_SDMMC3_DAT0_PB7 _GPIO(15) +#define TEGRA_PIN_UART3_RTS_N_PC0 _GPIO(16) +#define TEGRA_PIN_UART2_TXD_PC2 _GPIO(18) +#define TEGRA_PIN_UART2_RXD_PC3 _GPIO(19) +#define TEGRA_PIN_GEN1_I2C_SCL_PC4 _GPIO(20) +#define TEGRA_PIN_GEN1_I2C_SDA_PC5 _GPIO(21) +#define TEGRA_PIN_GMI_WP_N_PC7 _GPIO(23) +#define TEGRA_PIN_GMI_AD0_PG0 _GPIO(48) +#define TEGRA_PIN_GMI_AD1_PG1 _GPIO(49) +#define TEGRA_PIN_GMI_AD2_PG2 _GPIO(50) +#define TEGRA_PIN_GMI_AD3_PG3 _GPIO(51) +#define TEGRA_PIN_GMI_AD4_PG4 _GPIO(52) +#define TEGRA_PIN_GMI_AD5_PG5 _GPIO(53) +#define TEGRA_PIN_GMI_AD6_PG6 _GPIO(54) +#define TEGRA_PIN_GMI_AD7_PG7 _GPIO(55) +#define TEGRA_PIN_GMI_AD8_PH0 _GPIO(56) +#define TEGRA_PIN_GMI_AD9_PH1 _GPIO(57) +#define TEGRA_PIN_GMI_AD10_PH2 _GPIO(58) +#define TEGRA_PIN_GMI_AD11_PH3 _GPIO(59) +#define TEGRA_PIN_GMI_AD12_PH4 _GPIO(60) +#define TEGRA_PIN_GMI_AD13_PH5 _GPIO(61) +#define TEGRA_PIN_GMI_AD14_PH6 _GPIO(62) +#define TEGRA_PIN_GMI_AD15_PH7 _GPIO(63) +#define TEGRA_PIN_GMI_WR_N_PI0 _GPIO(64) +#define TEGRA_PIN_GMI_OE_N_PI1 _GPIO(65) +#define TEGRA_PIN_GMI_CS6_N_PI3 _GPIO(67) +#define TEGRA_PIN_GMI_RST_N_PI4 _GPIO(68) +#define TEGRA_PIN_GMI_IORDY_PI5 _GPIO(69) +#define TEGRA_PIN_GMI_CS7_N_PI6 _GPIO(70) +#define TEGRA_PIN_GMI_WAIT_PI7 _GPIO(71) +#define TEGRA_PIN_GMI_CS0_N_PJ0 _GPIO(72) +#define TEGRA_PIN_GMI_CS1_N_PJ2 _GPIO(74) +#define TEGRA_PIN_GMI_DQS_P_PJ3 _GPIO(75) +#define TEGRA_PIN_UART2_CTS_N_PJ5 _GPIO(77) +#define TEGRA_PIN_UART2_RTS_N_PJ6 _GPIO(78) +#define TEGRA_PIN_GMI_A16_PJ7 _GPIO(79) +#define TEGRA_PIN_GMI_ADV_N_PK0 _GPIO(80) +#define TEGRA_PIN_GMI_CLK_PK1 _GPIO(81) +#define TEGRA_PIN_GMI_CS4_N_PK2 _GPIO(82) +#define TEGRA_PIN_GMI_CS2_N_PK3 _GPIO(83) +#define TEGRA_PIN_GMI_CS3_N_PK4 _GPIO(84) +#define TEGRA_PIN_SPDIF_OUT_PK5 _GPIO(85) +#define TEGRA_PIN_SPDIF_IN_PK6 _GPIO(86) +#define TEGRA_PIN_GMI_A19_PK7 _GPIO(87) +#define TEGRA_PIN_DAP1_FS_PN0 _GPIO(104) +#define TEGRA_PIN_DAP1_DIN_PN1 _GPIO(105) +#define TEGRA_PIN_DAP1_DOUT_PN2 _GPIO(106) +#define TEGRA_PIN_DAP1_SCLK_PN3 _GPIO(107) +#define TEGRA_PIN_USB_VBUS_EN0_PN4 _GPIO(108) +#define TEGRA_PIN_USB_VBUS_EN1_PN5 _GPIO(109) +#define TEGRA_PIN_HDMI_INT_PN7 _GPIO(111) +#define TEGRA_PIN_ULPI_DATA7_PO0 _GPIO(112) +#define TEGRA_PIN_ULPI_DATA0_PO1 _GPIO(113) +#define TEGRA_PIN_ULPI_DATA1_PO2 _GPIO(114) +#define TEGRA_PIN_ULPI_DATA2_PO3 _GPIO(115) +#define TEGRA_PIN_ULPI_DATA3_PO4 _GPIO(116) +#define TEGRA_PIN_ULPI_DATA4_PO5 _GPIO(117) +#define TEGRA_PIN_ULPI_DATA5_PO6 _GPIO(118) +#define TEGRA_PIN_ULPI_DATA6_PO7 _GPIO(119) +#define TEGRA_PIN_DAP3_FS_PP0 _GPIO(120) +#define TEGRA_PIN_DAP3_DIN_PP1 _GPIO(121) +#define TEGRA_PIN_DAP3_DOUT_PP2 _GPIO(122) +#define TEGRA_PIN_DAP3_SCLK_PP3 _GPIO(123) +#define TEGRA_PIN_DAP4_FS_PP4 _GPIO(124) +#define TEGRA_PIN_DAP4_DIN_PP5 _GPIO(125) +#define TEGRA_PIN_DAP4_DOUT_PP6 _GPIO(126) +#define TEGRA_PIN_DAP4_SCLK_PP7 _GPIO(127) +#define TEGRA_PIN_KB_COL0_PQ0 _GPIO(128) +#define TEGRA_PIN_KB_COL1_PQ1 _GPIO(129) +#define TEGRA_PIN_KB_COL2_PQ2 _GPIO(130) +#define TEGRA_PIN_KB_COL3_PQ3 _GPIO(131) +#define TEGRA_PIN_KB_COL4_PQ4 _GPIO(132) +#define TEGRA_PIN_KB_COL5_PQ5 _GPIO(133) +#define TEGRA_PIN_KB_COL6_PQ6 _GPIO(134) +#define TEGRA_PIN_KB_COL7_PQ7 _GPIO(135) +#define TEGRA_PIN_KB_ROW0_PR0 _GPIO(136) +#define TEGRA_PIN_KB_ROW1_PR1 _GPIO(137) +#define TEGRA_PIN_KB_ROW2_PR2 _GPIO(138) +#define TEGRA_PIN_KB_ROW3_PR3 _GPIO(139) +#define TEGRA_PIN_KB_ROW4_PR4 _GPIO(140) +#define TEGRA_PIN_KB_ROW5_PR5 _GPIO(141) +#define TEGRA_PIN_KB_ROW6_PR6 _GPIO(142) +#define TEGRA_PIN_KB_ROW7_PR7 _GPIO(143) +#define TEGRA_PIN_KB_ROW8_PS0 _GPIO(144) +#define TEGRA_PIN_KB_ROW9_PS1 _GPIO(145) +#define TEGRA_PIN_KB_ROW10_PS2 _GPIO(146) +#define TEGRA_PIN_GEN2_I2C_SCL_PT5 _GPIO(157) +#define TEGRA_PIN_GEN2_I2C_SDA_PT6 _GPIO(158) +#define TEGRA_PIN_SDMMC4_CMD_PT7 _GPIO(159) +#define TEGRA_PIN_PU0 _GPIO(160) +#define TEGRA_PIN_PU1 _GPIO(161) +#define TEGRA_PIN_PU2 _GPIO(162) +#define TEGRA_PIN_PU3 _GPIO(163) +#define TEGRA_PIN_PU4 _GPIO(164) +#define TEGRA_PIN_PU5 _GPIO(165) +#define TEGRA_PIN_PU6 _GPIO(166) +#define TEGRA_PIN_PV0 _GPIO(168) +#define TEGRA_PIN_PV1 _GPIO(169) +#define TEGRA_PIN_SDMMC3_CD_N_PV2 _GPIO(170) +#define TEGRA_PIN_SDMMC1_WP_N_PV3 _GPIO(171) +#define TEGRA_PIN_DDC_SCL_PV4 _GPIO(172) +#define TEGRA_PIN_DDC_SDA_PV5 _GPIO(173) +#define TEGRA_PIN_GPIO_W2_AUD_PW2 _GPIO(178) +#define TEGRA_PIN_GPIO_W3_AUD_PW3 _GPIO(179) +#define TEGRA_PIN_CLK1_OUT_PW4 _GPIO(180) +#define TEGRA_PIN_CLK2_OUT_PW5 _GPIO(181) +#define TEGRA_PIN_UART3_TXD_PW6 _GPIO(182) +#define TEGRA_PIN_UART3_RXD_PW7 _GPIO(183) +#define TEGRA_PIN_DVFS_PWM_PX0 _GPIO(184) +#define TEGRA_PIN_GPIO_X1_AUD_PX1 _GPIO(185) +#define TEGRA_PIN_DVFS_CLK_PX2 _GPIO(186) +#define TEGRA_PIN_GPIO_X3_AUD_PX3 _GPIO(187) +#define TEGRA_PIN_GPIO_X4_AUD_PX4 _GPIO(188) +#define TEGRA_PIN_GPIO_X5_AUD_PX5 _GPIO(189) +#define TEGRA_PIN_GPIO_X6_AUD_PX6 _GPIO(190) +#define TEGRA_PIN_GPIO_X7_AUD_PX7 _GPIO(191) +#define TEGRA_PIN_ULPI_CLK_PY0 _GPIO(192) +#define TEGRA_PIN_ULPI_DIR_PY1 _GPIO(193) +#define TEGRA_PIN_ULPI_NXT_PY2 _GPIO(194) +#define TEGRA_PIN_ULPI_STP_PY3 _GPIO(195) +#define TEGRA_PIN_SDMMC1_DAT3_PY4 _GPIO(196) +#define TEGRA_PIN_SDMMC1_DAT2_PY5 _GPIO(197) +#define TEGRA_PIN_SDMMC1_DAT1_PY6 _GPIO(198) +#define TEGRA_PIN_SDMMC1_DAT0_PY7 _GPIO(199) +#define TEGRA_PIN_SDMMC1_CLK_PZ0 _GPIO(200) +#define TEGRA_PIN_SDMMC1_CMD_PZ1 _GPIO(201) +#define TEGRA_PIN_SYS_CLK_REQ_PZ5 _GPIO(205) +#define TEGRA_PIN_PWR_I2C_SCL_PZ6 _GPIO(206) +#define TEGRA_PIN_PWR_I2C_SDA_PZ7 _GPIO(207) +#define TEGRA_PIN_SDMMC4_DAT0_PAA0 _GPIO(208) +#define TEGRA_PIN_SDMMC4_DAT1_PAA1 _GPIO(209) +#define TEGRA_PIN_SDMMC4_DAT2_PAA2 _GPIO(210) +#define TEGRA_PIN_SDMMC4_DAT3_PAA3 _GPIO(211) +#define TEGRA_PIN_SDMMC4_DAT4_PAA4 _GPIO(212) +#define TEGRA_PIN_SDMMC4_DAT5_PAA5 _GPIO(213) +#define TEGRA_PIN_SDMMC4_DAT6_PAA6 _GPIO(214) +#define TEGRA_PIN_SDMMC4_DAT7_PAA7 _GPIO(215) +#define TEGRA_PIN_PBB0 _GPIO(216) +#define TEGRA_PIN_CAM_I2C_SCL_PBB1 _GPIO(217) +#define TEGRA_PIN_CAM_I2C_SDA_PBB2 _GPIO(218) +#define TEGRA_PIN_PBB3 _GPIO(219) +#define TEGRA_PIN_PBB4 _GPIO(220) +#define TEGRA_PIN_PBB5 _GPIO(221) +#define TEGRA_PIN_PBB6 _GPIO(222) +#define TEGRA_PIN_PBB7 _GPIO(223) +#define TEGRA_PIN_CAM_MCLK_PCC0 _GPIO(224) +#define TEGRA_PIN_PCC1 _GPIO(225) +#define TEGRA_PIN_PCC2 _GPIO(226) +#define TEGRA_PIN_SDMMC4_CLK_PCC4 _GPIO(228) +#define TEGRA_PIN_CLK2_REQ_PCC5 _GPIO(229) +#define TEGRA_PIN_CLK3_OUT_PEE0 _GPIO(240) +#define TEGRA_PIN_CLK3_REQ_PEE1 _GPIO(241) +#define TEGRA_PIN_CLK1_REQ_PEE2 _GPIO(242) +#define TEGRA_PIN_HDMI_CEC_PEE3 _GPIO(243) +#define TEGRA_PIN_SDMMC3_CLK_LB_OUT_PEE4 _GPIO(244) +#define TEGRA_PIN_SDMMC3_CLK_LB_IN_PEE5 _GPIO(245) + +/* All non-GPIO pins follow */ +#define NUM_GPIOS (TEGRA_PIN_SDMMC3_CLK_LB_IN_PEE5 + 1) +#define _PIN(offset) (NUM_GPIOS + (offset)) + +/* Non-GPIO pins */ +#define TEGRA_PIN_CORE_PWR_REQ _PIN(0) +#define TEGRA_PIN_CPU_PWR_REQ _PIN(1) +#define TEGRA_PIN_PWR_INT_N _PIN(2) +#define TEGRA_PIN_RESET_OUT_N _PIN(3) +#define TEGRA_PIN_OWR _PIN(4) + +static const struct pinctrl_pin_desc tegra114_pins[] = { + PINCTRL_PIN(TEGRA_PIN_CLK_32K_OUT_PA0, "CLK_32K_OUT PA0"), + PINCTRL_PIN(TEGRA_PIN_UART3_CTS_N_PA1, "UART3_CTS_N PA1"), + PINCTRL_PIN(TEGRA_PIN_DAP2_FS_PA2, "DAP2_FS PA2"), + PINCTRL_PIN(TEGRA_PIN_DAP2_SCLK_PA3, "DAP2_SCLK PA3"), + PINCTRL_PIN(TEGRA_PIN_DAP2_DIN_PA4, "DAP2_DIN PA4"), + PINCTRL_PIN(TEGRA_PIN_DAP2_DOUT_PA5, "DAP2_DOUT PA5"), + PINCTRL_PIN(TEGRA_PIN_SDMMC3_CLK_PA6, "SDMMC3_CLK PA6"), + PINCTRL_PIN(TEGRA_PIN_SDMMC3_CMD_PA7, "SDMMC3_CMD PA7"), + PINCTRL_PIN(TEGRA_PIN_GMI_A17_PB0, "GMI_A17 PB0"), + PINCTRL_PIN(TEGRA_PIN_GMI_A18_PB1, "GMI_A18 PB1"), + PINCTRL_PIN(TEGRA_PIN_SDMMC3_DAT3_PB4, "SDMMC3_DAT3 PB4"), + PINCTRL_PIN(TEGRA_PIN_SDMMC3_DAT2_PB5, "SDMMC3_DAT2 PB5"), + PINCTRL_PIN(TEGRA_PIN_SDMMC3_DAT1_PB6, "SDMMC3_DAT1 PB6"), + PINCTRL_PIN(TEGRA_PIN_SDMMC3_DAT0_PB7, "SDMMC3_DAT0 PB7"), + PINCTRL_PIN(TEGRA_PIN_UART3_RTS_N_PC0, "UART3_RTS_N PC0"), + PINCTRL_PIN(TEGRA_PIN_UART2_TXD_PC2, "UART2_TXD PC2"), + PINCTRL_PIN(TEGRA_PIN_UART2_RXD_PC3, "UART2_RXD PC3"), + PINCTRL_PIN(TEGRA_PIN_GEN1_I2C_SCL_PC4, "GEN1_I2C_SCL PC4"), + PINCTRL_PIN(TEGRA_PIN_GEN1_I2C_SDA_PC5, "GEN1_I2C_SDA PC5"), + PINCTRL_PIN(TEGRA_PIN_GMI_WP_N_PC7, "GMI_WP_N PC7"), + PINCTRL_PIN(TEGRA_PIN_GMI_AD0_PG0, "GMI_AD0 PG0"), + PINCTRL_PIN(TEGRA_PIN_GMI_AD1_PG1, "GMI_AD1 PG1"), + PINCTRL_PIN(TEGRA_PIN_GMI_AD2_PG2, "GMI_AD2 PG2"), + PINCTRL_PIN(TEGRA_PIN_GMI_AD3_PG3, "GMI_AD3 PG3"), + PINCTRL_PIN(TEGRA_PIN_GMI_AD4_PG4, "GMI_AD4 PG4"), + PINCTRL_PIN(TEGRA_PIN_GMI_AD5_PG5, "GMI_AD5 PG5"), + PINCTRL_PIN(TEGRA_PIN_GMI_AD6_PG6, "GMI_AD6 PG6"), + PINCTRL_PIN(TEGRA_PIN_GMI_AD7_PG7, "GMI_AD7 PG7"), + PINCTRL_PIN(TEGRA_PIN_GMI_AD8_PH0, "GMI_AD8 PH0"), + PINCTRL_PIN(TEGRA_PIN_GMI_AD9_PH1, "GMI_AD9 PH1"), + PINCTRL_PIN(TEGRA_PIN_GMI_AD10_PH2, "GMI_AD10 PH2"), + PINCTRL_PIN(TEGRA_PIN_GMI_AD11_PH3, "GMI_AD11 PH3"), + PINCTRL_PIN(TEGRA_PIN_GMI_AD12_PH4, "GMI_AD12 PH4"), + PINCTRL_PIN(TEGRA_PIN_GMI_AD13_PH5, "GMI_AD13 PH5"), + PINCTRL_PIN(TEGRA_PIN_GMI_AD14_PH6, "GMI_AD14 PH6"), + PINCTRL_PIN(TEGRA_PIN_GMI_AD15_PH7, "GMI_AD15 PH7"), + PINCTRL_PIN(TEGRA_PIN_GMI_WR_N_PI0, "GMI_WR_N PI0"), + PINCTRL_PIN(TEGRA_PIN_GMI_OE_N_PI1, "GMI_OE_N PI1"), + PINCTRL_PIN(TEGRA_PIN_GMI_CS6_N_PI3, "GMI_CS6_N PI3"), + PINCTRL_PIN(TEGRA_PIN_GMI_RST_N_PI4, "GMI_RST_N PI4"), + PINCTRL_PIN(TEGRA_PIN_GMI_IORDY_PI5, "GMI_IORDY PI5"), + PINCTRL_PIN(TEGRA_PIN_GMI_CS7_N_PI6, "GMI_CS7_N PI6"), + PINCTRL_PIN(TEGRA_PIN_GMI_WAIT_PI7, "GMI_WAIT PI7"), + PINCTRL_PIN(TEGRA_PIN_GMI_CS0_N_PJ0, "GMI_CS0_N PJ0"), + PINCTRL_PIN(TEGRA_PIN_GMI_CS1_N_PJ2, "GMI_CS1_N PJ2"), + PINCTRL_PIN(TEGRA_PIN_GMI_DQS_P_PJ3, "GMI_DQS_P PJ3"), + PINCTRL_PIN(TEGRA_PIN_UART2_CTS_N_PJ5, "UART2_CTS_N PJ5"), + PINCTRL_PIN(TEGRA_PIN_UART2_RTS_N_PJ6, "UART2_RTS_N PJ6"), + PINCTRL_PIN(TEGRA_PIN_GMI_A16_PJ7, "GMI_A16 PJ7"), + PINCTRL_PIN(TEGRA_PIN_GMI_ADV_N_PK0, "GMI_ADV_N PK0"), + PINCTRL_PIN(TEGRA_PIN_GMI_CLK_PK1, "GMI_CLK PK1"), + PINCTRL_PIN(TEGRA_PIN_GMI_CS4_N_PK2, "GMI_CS4_N PK2"), + PINCTRL_PIN(TEGRA_PIN_GMI_CS2_N_PK3, "GMI_CS2_N PK3"), + PINCTRL_PIN(TEGRA_PIN_GMI_CS3_N_PK4, "GMI_CS3_N PK4"), + PINCTRL_PIN(TEGRA_PIN_SPDIF_OUT_PK5, "SPDIF_OUT PK5"), + PINCTRL_PIN(TEGRA_PIN_SPDIF_IN_PK6, "SPDIF_IN PK6"), + PINCTRL_PIN(TEGRA_PIN_GMI_A19_PK7, "GMI_A19 PK7"), + PINCTRL_PIN(TEGRA_PIN_DAP1_FS_PN0, "DAP1_FS PN0"), + PINCTRL_PIN(TEGRA_PIN_DAP1_DIN_PN1, "DAP1_DIN PN1"), + PINCTRL_PIN(TEGRA_PIN_DAP1_DOUT_PN2, "DAP1_DOUT PN2"), + PINCTRL_PIN(TEGRA_PIN_DAP1_SCLK_PN3, "DAP1_SCLK PN3"), + PINCTRL_PIN(TEGRA_PIN_USB_VBUS_EN0_PN4, "USB_VBUS_EN0 PN4"), + PINCTRL_PIN(TEGRA_PIN_USB_VBUS_EN1_PN5, "USB_VBUS_EN1 PN5"), + PINCTRL_PIN(TEGRA_PIN_HDMI_INT_PN7, "HDMI_INT PN7"), + PINCTRL_PIN(TEGRA_PIN_ULPI_DATA7_PO0, "ULPI_DATA7 PO0"), + PINCTRL_PIN(TEGRA_PIN_ULPI_DATA0_PO1, "ULPI_DATA0 PO1"), + PINCTRL_PIN(TEGRA_PIN_ULPI_DATA1_PO2, "ULPI_DATA1 PO2"), + PINCTRL_PIN(TEGRA_PIN_ULPI_DATA2_PO3, "ULPI_DATA2 PO3"), + PINCTRL_PIN(TEGRA_PIN_ULPI_DATA3_PO4, "ULPI_DATA3 PO4"), + PINCTRL_PIN(TEGRA_PIN_ULPI_DATA4_PO5, "ULPI_DATA4 PO5"), + PINCTRL_PIN(TEGRA_PIN_ULPI_DATA5_PO6, "ULPI_DATA5 PO6"), + PINCTRL_PIN(TEGRA_PIN_ULPI_DATA6_PO7, "ULPI_DATA6 PO7"), + PINCTRL_PIN(TEGRA_PIN_DAP3_FS_PP0, "DAP3_FS PP0"), + PINCTRL_PIN(TEGRA_PIN_DAP3_DIN_PP1, "DAP3_DIN PP1"), + PINCTRL_PIN(TEGRA_PIN_DAP3_DOUT_PP2, "DAP3_DOUT PP2"), + PINCTRL_PIN(TEGRA_PIN_DAP3_SCLK_PP3, "DAP3_SCLK PP3"), + PINCTRL_PIN(TEGRA_PIN_DAP4_FS_PP4, "DAP4_FS PP4"), + PINCTRL_PIN(TEGRA_PIN_DAP4_DIN_PP5, "DAP4_DIN PP5"), + PINCTRL_PIN(TEGRA_PIN_DAP4_DOUT_PP6, "DAP4_DOUT PP6"), + PINCTRL_PIN(TEGRA_PIN_DAP4_SCLK_PP7, "DAP4_SCLK PP7"), + PINCTRL_PIN(TEGRA_PIN_KB_COL0_PQ0, "KB_COL0 PQ0"), + PINCTRL_PIN(TEGRA_PIN_KB_COL1_PQ1, "KB_COL1 PQ1"), + PINCTRL_PIN(TEGRA_PIN_KB_COL2_PQ2, "KB_COL2 PQ2"), + PINCTRL_PIN(TEGRA_PIN_KB_COL3_PQ3, "KB_COL3 PQ3"), + PINCTRL_PIN(TEGRA_PIN_KB_COL4_PQ4, "KB_COL4 PQ4"), + PINCTRL_PIN(TEGRA_PIN_KB_COL5_PQ5, "KB_COL5 PQ5"), + PINCTRL_PIN(TEGRA_PIN_KB_COL6_PQ6, "KB_COL6 PQ6"), + PINCTRL_PIN(TEGRA_PIN_KB_COL7_PQ7, "KB_COL7 PQ7"), + PINCTRL_PIN(TEGRA_PIN_KB_ROW0_PR0, "KB_ROW0 PR0"), + PINCTRL_PIN(TEGRA_PIN_KB_ROW1_PR1, "KB_ROW1 PR1"), + PINCTRL_PIN(TEGRA_PIN_KB_ROW2_PR2, "KB_ROW2 PR2"), + PINCTRL_PIN(TEGRA_PIN_KB_ROW3_PR3, "KB_ROW3 PR3"), + PINCTRL_PIN(TEGRA_PIN_KB_ROW4_PR4, "KB_ROW4 PR4"), + PINCTRL_PIN(TEGRA_PIN_KB_ROW5_PR5, "KB_ROW5 PR5"), + PINCTRL_PIN(TEGRA_PIN_KB_ROW6_PR6, "KB_ROW6 PR6"), + PINCTRL_PIN(TEGRA_PIN_KB_ROW7_PR7, "KB_ROW7 PR7"), + PINCTRL_PIN(TEGRA_PIN_KB_ROW8_PS0, "KB_ROW8 PS0"), + PINCTRL_PIN(TEGRA_PIN_KB_ROW9_PS1, "KB_ROW9 PS1"), + PINCTRL_PIN(TEGRA_PIN_KB_ROW10_PS2, "KB_ROW10 PS2"), + PINCTRL_PIN(TEGRA_PIN_GEN2_I2C_SCL_PT5, "GEN2_I2C_SCL PT5"), + PINCTRL_PIN(TEGRA_PIN_GEN2_I2C_SDA_PT6, "GEN2_I2C_SDA PT6"), + PINCTRL_PIN(TEGRA_PIN_SDMMC4_CMD_PT7, "SDMMC4_CMD PT7"), + PINCTRL_PIN(TEGRA_PIN_PU0, "PU0"), + PINCTRL_PIN(TEGRA_PIN_PU1, "PU1"), + PINCTRL_PIN(TEGRA_PIN_PU2, "PU2"), + PINCTRL_PIN(TEGRA_PIN_PU3, "PU3"), + PINCTRL_PIN(TEGRA_PIN_PU4, "PU4"), + PINCTRL_PIN(TEGRA_PIN_PU5, "PU5"), + PINCTRL_PIN(TEGRA_PIN_PU6, "PU6"), + PINCTRL_PIN(TEGRA_PIN_PV0, "PV0"), + PINCTRL_PIN(TEGRA_PIN_PV1, "PV1"), + PINCTRL_PIN(TEGRA_PIN_SDMMC3_CD_N_PV2, "SDMMC3_CD_N PV2"), + PINCTRL_PIN(TEGRA_PIN_SDMMC1_WP_N_PV3, "SDMMC1_WP_N PV3"), + PINCTRL_PIN(TEGRA_PIN_DDC_SCL_PV4, "DDC_SCL PV4"), + PINCTRL_PIN(TEGRA_PIN_DDC_SDA_PV5, "DDC_SDA PV5"), + PINCTRL_PIN(TEGRA_PIN_GPIO_W2_AUD_PW2, "GPIO_W2_AUD PW2"), + PINCTRL_PIN(TEGRA_PIN_GPIO_W3_AUD_PW3, "GPIO_W3_AUD PW3"), + PINCTRL_PIN(TEGRA_PIN_CLK1_OUT_PW4, "CLK1_OUT PW4"), + PINCTRL_PIN(TEGRA_PIN_CLK2_OUT_PW5, "CLK2_OUT PW5"), + PINCTRL_PIN(TEGRA_PIN_UART3_TXD_PW6, "UART3_TXD PW6"), + PINCTRL_PIN(TEGRA_PIN_UART3_RXD_PW7, "UART3_RXD PW7"), + PINCTRL_PIN(TEGRA_PIN_DVFS_PWM_PX0, "DVFS_PWM PX0"), + PINCTRL_PIN(TEGRA_PIN_GPIO_X1_AUD_PX1, "GPIO_X1_AUD PX1"), + PINCTRL_PIN(TEGRA_PIN_DVFS_CLK_PX2, "DVFS_CLK PX2"), + PINCTRL_PIN(TEGRA_PIN_GPIO_X3_AUD_PX3, "GPIO_X3_AUD PX3"), + PINCTRL_PIN(TEGRA_PIN_GPIO_X4_AUD_PX4, "GPIO_X4_AUD PX4"), + PINCTRL_PIN(TEGRA_PIN_GPIO_X5_AUD_PX5, "GPIO_X5_AUD PX5"), + PINCTRL_PIN(TEGRA_PIN_GPIO_X6_AUD_PX6, "GPIO_X6_AUD PX6"), + PINCTRL_PIN(TEGRA_PIN_GPIO_X7_AUD_PX7, "GPIO_X7_AUD PX7"), + PINCTRL_PIN(TEGRA_PIN_ULPI_CLK_PY0, "ULPI_CLK PY0"), + PINCTRL_PIN(TEGRA_PIN_ULPI_DIR_PY1, "ULPI_DIR PY1"), + PINCTRL_PIN(TEGRA_PIN_ULPI_NXT_PY2, "ULPI_NXT PY2"), + PINCTRL_PIN(TEGRA_PIN_ULPI_STP_PY3, "ULPI_STP PY3"), + PINCTRL_PIN(TEGRA_PIN_SDMMC1_DAT3_PY4, "SDMMC1_DAT3 PY4"), + PINCTRL_PIN(TEGRA_PIN_SDMMC1_DAT2_PY5, "SDMMC1_DAT2 PY5"), + PINCTRL_PIN(TEGRA_PIN_SDMMC1_DAT1_PY6, "SDMMC1_DAT1 PY6"), + PINCTRL_PIN(TEGRA_PIN_SDMMC1_DAT0_PY7, "SDMMC1_DAT0 PY7"), + PINCTRL_PIN(TEGRA_PIN_SDMMC1_CLK_PZ0, "SDMMC1_CLK PZ0"), + PINCTRL_PIN(TEGRA_PIN_SDMMC1_CMD_PZ1, "SDMMC1_CMD PZ1"), + PINCTRL_PIN(TEGRA_PIN_SYS_CLK_REQ_PZ5, "SYS_CLK_REQ PZ5"), + PINCTRL_PIN(TEGRA_PIN_PWR_I2C_SCL_PZ6, "PWR_I2C_SCL PZ6"), + PINCTRL_PIN(TEGRA_PIN_PWR_I2C_SDA_PZ7, "PWR_I2C_SDA PZ7"), + PINCTRL_PIN(TEGRA_PIN_SDMMC4_DAT0_PAA0, "SDMMC4_DAT0 PAA0"), + PINCTRL_PIN(TEGRA_PIN_SDMMC4_DAT1_PAA1, "SDMMC4_DAT1 PAA1"), + PINCTRL_PIN(TEGRA_PIN_SDMMC4_DAT2_PAA2, "SDMMC4_DAT2 PAA2"), + PINCTRL_PIN(TEGRA_PIN_SDMMC4_DAT3_PAA3, "SDMMC4_DAT3 PAA3"), + PINCTRL_PIN(TEGRA_PIN_SDMMC4_DAT4_PAA4, "SDMMC4_DAT4 PAA4"), + PINCTRL_PIN(TEGRA_PIN_SDMMC4_DAT5_PAA5, "SDMMC4_DAT5 PAA5"), + PINCTRL_PIN(TEGRA_PIN_SDMMC4_DAT6_PAA6, "SDMMC4_DAT6 PAA6"), + PINCTRL_PIN(TEGRA_PIN_SDMMC4_DAT7_PAA7, "SDMMC4_DAT7 PAA7"), + PINCTRL_PIN(TEGRA_PIN_PBB0, "PBB0"), + PINCTRL_PIN(TEGRA_PIN_CAM_I2C_SCL_PBB1, "CAM_I2C_SCL PBB1"), + PINCTRL_PIN(TEGRA_PIN_CAM_I2C_SDA_PBB2, "CAM_I2C_SDA PBB2"), + PINCTRL_PIN(TEGRA_PIN_PBB3, "PBB3"), + PINCTRL_PIN(TEGRA_PIN_PBB4, "PBB4"), + PINCTRL_PIN(TEGRA_PIN_PBB5, "PBB5"), + PINCTRL_PIN(TEGRA_PIN_PBB6, "PBB6"), + PINCTRL_PIN(TEGRA_PIN_PBB7, "PBB7"), + PINCTRL_PIN(TEGRA_PIN_CAM_MCLK_PCC0, "CAM_MCLK PCC0"), + PINCTRL_PIN(TEGRA_PIN_PCC1, "PCC1"), + PINCTRL_PIN(TEGRA_PIN_PCC2, "PCC2"), + PINCTRL_PIN(TEGRA_PIN_SDMMC4_CLK_PCC4, "SDMMC4_CLK PCC4"), + PINCTRL_PIN(TEGRA_PIN_CLK2_REQ_PCC5, "CLK2_REQ PCC5"), + PINCTRL_PIN(TEGRA_PIN_CLK3_OUT_PEE0, "CLK3_OUT PEE0"), + PINCTRL_PIN(TEGRA_PIN_CLK3_REQ_PEE1, "CLK3_REQ PEE1"), + PINCTRL_PIN(TEGRA_PIN_CLK1_REQ_PEE2, "CLK1_REQ PEE2"), + PINCTRL_PIN(TEGRA_PIN_HDMI_CEC_PEE3, "HDMI_CEC PEE3"), + PINCTRL_PIN(TEGRA_PIN_SDMMC3_CLK_LB_OUT_PEE4, "SDMMC3_CLK_LB_OUT PEE4"), + PINCTRL_PIN(TEGRA_PIN_SDMMC3_CLK_LB_IN_PEE5, "SDMMC3_CLK_LB_IN PEE5"), + PINCTRL_PIN(TEGRA_PIN_CORE_PWR_REQ, "CORE_PWR_REQ"), + PINCTRL_PIN(TEGRA_PIN_CPU_PWR_REQ, "CPU_PWR_REQ"), + PINCTRL_PIN(TEGRA_PIN_OWR, "OWR"), + PINCTRL_PIN(TEGRA_PIN_PWR_INT_N, "PWR_INT_N"), + PINCTRL_PIN(TEGRA_PIN_RESET_OUT_N, "RESET_OUT_N"), +}; + +static const unsigned clk_32k_out_pa0_pins[] = { + TEGRA_PIN_CLK_32K_OUT_PA0, +}; + +static const unsigned uart3_cts_n_pa1_pins[] = { + TEGRA_PIN_UART3_CTS_N_PA1, +}; + +static const unsigned dap2_fs_pa2_pins[] = { + TEGRA_PIN_DAP2_FS_PA2, +}; + +static const unsigned dap2_sclk_pa3_pins[] = { + TEGRA_PIN_DAP2_SCLK_PA3, +}; + +static const unsigned dap2_din_pa4_pins[] = { + TEGRA_PIN_DAP2_DIN_PA4, +}; + +static const unsigned dap2_dout_pa5_pins[] = { + TEGRA_PIN_DAP2_DOUT_PA5, +}; + +static const unsigned sdmmc3_clk_pa6_pins[] = { + TEGRA_PIN_SDMMC3_CLK_PA6, +}; + +static const unsigned sdmmc3_cmd_pa7_pins[] = { + TEGRA_PIN_SDMMC3_CMD_PA7, +}; + +static const unsigned gmi_a17_pb0_pins[] = { + TEGRA_PIN_GMI_A17_PB0, +}; + +static const unsigned gmi_a18_pb1_pins[] = { + TEGRA_PIN_GMI_A18_PB1, +}; + +static const unsigned sdmmc3_dat3_pb4_pins[] = { + TEGRA_PIN_SDMMC3_DAT3_PB4, +}; + +static const unsigned sdmmc3_dat2_pb5_pins[] = { + TEGRA_PIN_SDMMC3_DAT2_PB5, +}; + +static const unsigned sdmmc3_dat1_pb6_pins[] = { + TEGRA_PIN_SDMMC3_DAT1_PB6, +}; + +static const unsigned sdmmc3_dat0_pb7_pins[] = { + TEGRA_PIN_SDMMC3_DAT0_PB7, +}; + +static const unsigned uart3_rts_n_pc0_pins[] = { + TEGRA_PIN_UART3_RTS_N_PC0, +}; + +static const unsigned uart2_txd_pc2_pins[] = { + TEGRA_PIN_UART2_TXD_PC2, +}; + +static const unsigned uart2_rxd_pc3_pins[] = { + TEGRA_PIN_UART2_RXD_PC3, +}; + +static const unsigned gen1_i2c_scl_pc4_pins[] = { + TEGRA_PIN_GEN1_I2C_SCL_PC4, +}; + +static const unsigned gen1_i2c_sda_pc5_pins[] = { + TEGRA_PIN_GEN1_I2C_SDA_PC5, +}; + +static const unsigned gmi_wp_n_pc7_pins[] = { + TEGRA_PIN_GMI_WP_N_PC7, +}; + +static const unsigned gmi_ad0_pg0_pins[] = { + TEGRA_PIN_GMI_AD0_PG0, +}; + +static const unsigned gmi_ad1_pg1_pins[] = { + TEGRA_PIN_GMI_AD1_PG1, +}; + +static const unsigned gmi_ad2_pg2_pins[] = { + TEGRA_PIN_GMI_AD2_PG2, +}; + +static const unsigned gmi_ad3_pg3_pins[] = { + TEGRA_PIN_GMI_AD3_PG3, +}; + +static const unsigned gmi_ad4_pg4_pins[] = { + TEGRA_PIN_GMI_AD4_PG4, +}; + +static const unsigned gmi_ad5_pg5_pins[] = { + TEGRA_PIN_GMI_AD5_PG5, +}; + +static const unsigned gmi_ad6_pg6_pins[] = { + TEGRA_PIN_GMI_AD6_PG6, +}; + +static const unsigned gmi_ad7_pg7_pins[] = { + TEGRA_PIN_GMI_AD7_PG7, +}; + +static const unsigned gmi_ad8_ph0_pins[] = { + TEGRA_PIN_GMI_AD8_PH0, +}; + +static const unsigned gmi_ad9_ph1_pins[] = { + TEGRA_PIN_GMI_AD9_PH1, +}; + +static const unsigned gmi_ad10_ph2_pins[] = { + TEGRA_PIN_GMI_AD10_PH2, +}; + +static const unsigned gmi_ad11_ph3_pins[] = { + TEGRA_PIN_GMI_AD11_PH3, +}; + +static const unsigned gmi_ad12_ph4_pins[] = { + TEGRA_PIN_GMI_AD12_PH4, +}; + +static const unsigned gmi_ad13_ph5_pins[] = { + TEGRA_PIN_GMI_AD13_PH5, +}; + +static const unsigned gmi_ad14_ph6_pins[] = { + TEGRA_PIN_GMI_AD14_PH6, +}; + +static const unsigned gmi_ad15_ph7_pins[] = { + TEGRA_PIN_GMI_AD15_PH7, +}; + +static const unsigned gmi_wr_n_pi0_pins[] = { + TEGRA_PIN_GMI_WR_N_PI0, +}; + +static const unsigned gmi_oe_n_pi1_pins[] = { + TEGRA_PIN_GMI_OE_N_PI1, +}; + +static const unsigned gmi_cs6_n_pi3_pins[] = { + TEGRA_PIN_GMI_CS6_N_PI3, +}; + +static const unsigned gmi_rst_n_pi4_pins[] = { + TEGRA_PIN_GMI_RST_N_PI4, +}; + +static const unsigned gmi_iordy_pi5_pins[] = { + TEGRA_PIN_GMI_IORDY_PI5, +}; + +static const unsigned gmi_cs7_n_pi6_pins[] = { + TEGRA_PIN_GMI_CS7_N_PI6, +}; + +static const unsigned gmi_wait_pi7_pins[] = { + TEGRA_PIN_GMI_WAIT_PI7, +}; + +static const unsigned gmi_cs0_n_pj0_pins[] = { + TEGRA_PIN_GMI_CS0_N_PJ0, +}; + +static const unsigned gmi_cs1_n_pj2_pins[] = { + TEGRA_PIN_GMI_CS1_N_PJ2, +}; + +static const unsigned gmi_dqs_p_pj3_pins[] = { + TEGRA_PIN_GMI_DQS_P_PJ3, +}; + +static const unsigned uart2_cts_n_pj5_pins[] = { + TEGRA_PIN_UART2_CTS_N_PJ5, +}; + +static const unsigned uart2_rts_n_pj6_pins[] = { + TEGRA_PIN_UART2_RTS_N_PJ6, +}; + +static const unsigned gmi_a16_pj7_pins[] = { + TEGRA_PIN_GMI_A16_PJ7, +}; + +static const unsigned gmi_adv_n_pk0_pins[] = { + TEGRA_PIN_GMI_ADV_N_PK0, +}; + +static const unsigned gmi_clk_pk1_pins[] = { + TEGRA_PIN_GMI_CLK_PK1, +}; + +static const unsigned gmi_cs4_n_pk2_pins[] = { + TEGRA_PIN_GMI_CS4_N_PK2, +}; + +static const unsigned gmi_cs2_n_pk3_pins[] = { + TEGRA_PIN_GMI_CS2_N_PK3, +}; + +static const unsigned gmi_cs3_n_pk4_pins[] = { + TEGRA_PIN_GMI_CS3_N_PK4, +}; + +static const unsigned spdif_out_pk5_pins[] = { + TEGRA_PIN_SPDIF_OUT_PK5, +}; + +static const unsigned spdif_in_pk6_pins[] = { + TEGRA_PIN_SPDIF_IN_PK6, +}; + +static const unsigned gmi_a19_pk7_pins[] = { + TEGRA_PIN_GMI_A19_PK7, +}; + +static const unsigned dap1_fs_pn0_pins[] = { + TEGRA_PIN_DAP1_FS_PN0, +}; + +static const unsigned dap1_din_pn1_pins[] = { + TEGRA_PIN_DAP1_DIN_PN1, +}; + +static const unsigned dap1_dout_pn2_pins[] = { + TEGRA_PIN_DAP1_DOUT_PN2, +}; + +static const unsigned dap1_sclk_pn3_pins[] = { + TEGRA_PIN_DAP1_SCLK_PN3, +}; + +static const unsigned usb_vbus_en0_pn4_pins[] = { + TEGRA_PIN_USB_VBUS_EN0_PN4, +}; + +static const unsigned usb_vbus_en1_pn5_pins[] = { + TEGRA_PIN_USB_VBUS_EN1_PN5, +}; + +static const unsigned hdmi_int_pn7_pins[] = { + TEGRA_PIN_HDMI_INT_PN7, +}; + +static const unsigned ulpi_data7_po0_pins[] = { + TEGRA_PIN_ULPI_DATA7_PO0, +}; + +static const unsigned ulpi_data0_po1_pins[] = { + TEGRA_PIN_ULPI_DATA0_PO1, +}; + +static const unsigned ulpi_data1_po2_pins[] = { + TEGRA_PIN_ULPI_DATA1_PO2, +}; + +static const unsigned ulpi_data2_po3_pins[] = { + TEGRA_PIN_ULPI_DATA2_PO3, +}; + +static const unsigned ulpi_data3_po4_pins[] = { + TEGRA_PIN_ULPI_DATA3_PO4, +}; + +static const unsigned ulpi_data4_po5_pins[] = { + TEGRA_PIN_ULPI_DATA4_PO5, +}; + +static const unsigned ulpi_data5_po6_pins[] = { + TEGRA_PIN_ULPI_DATA5_PO6, +}; + +static const unsigned ulpi_data6_po7_pins[] = { + TEGRA_PIN_ULPI_DATA6_PO7, +}; + +static const unsigned dap3_fs_pp0_pins[] = { + TEGRA_PIN_DAP3_FS_PP0, +}; + +static const unsigned dap3_din_pp1_pins[] = { + TEGRA_PIN_DAP3_DIN_PP1, +}; + +static const unsigned dap3_dout_pp2_pins[] = { + TEGRA_PIN_DAP3_DOUT_PP2, +}; + +static const unsigned dap3_sclk_pp3_pins[] = { + TEGRA_PIN_DAP3_SCLK_PP3, +}; + +static const unsigned dap4_fs_pp4_pins[] = { + TEGRA_PIN_DAP4_FS_PP4, +}; + +static const unsigned dap4_din_pp5_pins[] = { + TEGRA_PIN_DAP4_DIN_PP5, +}; + +static const unsigned dap4_dout_pp6_pins[] = { + TEGRA_PIN_DAP4_DOUT_PP6, +}; + +static const unsigned dap4_sclk_pp7_pins[] = { + TEGRA_PIN_DAP4_SCLK_PP7, +}; + +static const unsigned kb_col0_pq0_pins[] = { + TEGRA_PIN_KB_COL0_PQ0, +}; + +static const unsigned kb_col1_pq1_pins[] = { + TEGRA_PIN_KB_COL1_PQ1, +}; + +static const unsigned kb_col2_pq2_pins[] = { + TEGRA_PIN_KB_COL2_PQ2, +}; + +static const unsigned kb_col3_pq3_pins[] = { + TEGRA_PIN_KB_COL3_PQ3, +}; + +static const unsigned kb_col4_pq4_pins[] = { + TEGRA_PIN_KB_COL4_PQ4, +}; + +static const unsigned kb_col5_pq5_pins[] = { + TEGRA_PIN_KB_COL5_PQ5, +}; + +static const unsigned kb_col6_pq6_pins[] = { + TEGRA_PIN_KB_COL6_PQ6, +}; + +static const unsigned kb_col7_pq7_pins[] = { + TEGRA_PIN_KB_COL7_PQ7, +}; + +static const unsigned kb_row0_pr0_pins[] = { + TEGRA_PIN_KB_ROW0_PR0, +}; + +static const unsigned kb_row1_pr1_pins[] = { + TEGRA_PIN_KB_ROW1_PR1, +}; + +static const unsigned kb_row2_pr2_pins[] = { + TEGRA_PIN_KB_ROW2_PR2, +}; + +static const unsigned kb_row3_pr3_pins[] = { + TEGRA_PIN_KB_ROW3_PR3, +}; + +static const unsigned kb_row4_pr4_pins[] = { + TEGRA_PIN_KB_ROW4_PR4, +}; + +static const unsigned kb_row5_pr5_pins[] = { + TEGRA_PIN_KB_ROW5_PR5, +}; + +static const unsigned kb_row6_pr6_pins[] = { + TEGRA_PIN_KB_ROW6_PR6, +}; + +static const unsigned kb_row7_pr7_pins[] = { + TEGRA_PIN_KB_ROW7_PR7, +}; + +static const unsigned kb_row8_ps0_pins[] = { + TEGRA_PIN_KB_ROW8_PS0, +}; + +static const unsigned kb_row9_ps1_pins[] = { + TEGRA_PIN_KB_ROW9_PS1, +}; + +static const unsigned kb_row10_ps2_pins[] = { + TEGRA_PIN_KB_ROW10_PS2, +}; + +static const unsigned gen2_i2c_scl_pt5_pins[] = { + TEGRA_PIN_GEN2_I2C_SCL_PT5, +}; + +static const unsigned gen2_i2c_sda_pt6_pins[] = { + TEGRA_PIN_GEN2_I2C_SDA_PT6, +}; + +static const unsigned sdmmc4_cmd_pt7_pins[] = { + TEGRA_PIN_SDMMC4_CMD_PT7, +}; + +static const unsigned pu0_pins[] = { + TEGRA_PIN_PU0, +}; + +static const unsigned pu1_pins[] = { + TEGRA_PIN_PU1, +}; + +static const unsigned pu2_pins[] = { + TEGRA_PIN_PU2, +}; + +static const unsigned pu3_pins[] = { + TEGRA_PIN_PU3, +}; + +static const unsigned pu4_pins[] = { + TEGRA_PIN_PU4, +}; + +static const unsigned pu5_pins[] = { + TEGRA_PIN_PU5, +}; + +static const unsigned pu6_pins[] = { + TEGRA_PIN_PU6, +}; + +static const unsigned pv0_pins[] = { + TEGRA_PIN_PV0, +}; + +static const unsigned pv1_pins[] = { + TEGRA_PIN_PV1, +}; + +static const unsigned sdmmc3_cd_n_pv2_pins[] = { + TEGRA_PIN_SDMMC3_CD_N_PV2, +}; + +static const unsigned sdmmc1_wp_n_pv3_pins[] = { + TEGRA_PIN_SDMMC1_WP_N_PV3, +}; + +static const unsigned ddc_scl_pv4_pins[] = { + TEGRA_PIN_DDC_SCL_PV4, +}; + +static const unsigned ddc_sda_pv5_pins[] = { + TEGRA_PIN_DDC_SDA_PV5, +}; + +static const unsigned gpio_w2_aud_pw2_pins[] = { + TEGRA_PIN_GPIO_W2_AUD_PW2, +}; + +static const unsigned gpio_w3_aud_pw3_pins[] = { + TEGRA_PIN_GPIO_W3_AUD_PW3, +}; + +static const unsigned clk1_out_pw4_pins[] = { + TEGRA_PIN_CLK1_OUT_PW4, +}; + +static const unsigned clk2_out_pw5_pins[] = { + TEGRA_PIN_CLK2_OUT_PW5, +}; + +static const unsigned uart3_txd_pw6_pins[] = { + TEGRA_PIN_UART3_TXD_PW6, +}; + +static const unsigned uart3_rxd_pw7_pins[] = { + TEGRA_PIN_UART3_RXD_PW7, +}; + +static const unsigned dvfs_pwm_px0_pins[] = { + TEGRA_PIN_DVFS_PWM_PX0, +}; + +static const unsigned gpio_x1_aud_px1_pins[] = { + TEGRA_PIN_GPIO_X1_AUD_PX1, +}; + +static const unsigned dvfs_clk_px2_pins[] = { + TEGRA_PIN_DVFS_CLK_PX2, +}; + +static const unsigned gpio_x3_aud_px3_pins[] = { + TEGRA_PIN_GPIO_X3_AUD_PX3, +}; + +static const unsigned gpio_x4_aud_px4_pins[] = { + TEGRA_PIN_GPIO_X4_AUD_PX4, +}; + +static const unsigned gpio_x5_aud_px5_pins[] = { + TEGRA_PIN_GPIO_X5_AUD_PX5, +}; + +static const unsigned gpio_x6_aud_px6_pins[] = { + TEGRA_PIN_GPIO_X6_AUD_PX6, +}; + +static const unsigned gpio_x7_aud_px7_pins[] = { + TEGRA_PIN_GPIO_X7_AUD_PX7, +}; + +static const unsigned ulpi_clk_py0_pins[] = { + TEGRA_PIN_ULPI_CLK_PY0, +}; + +static const unsigned ulpi_dir_py1_pins[] = { + TEGRA_PIN_ULPI_DIR_PY1, +}; + +static const unsigned ulpi_nxt_py2_pins[] = { + TEGRA_PIN_ULPI_NXT_PY2, +}; + +static const unsigned ulpi_stp_py3_pins[] = { + TEGRA_PIN_ULPI_STP_PY3, +}; + +static const unsigned sdmmc1_dat3_py4_pins[] = { + TEGRA_PIN_SDMMC1_DAT3_PY4, +}; + +static const unsigned sdmmc1_dat2_py5_pins[] = { + TEGRA_PIN_SDMMC1_DAT2_PY5, +}; + +static const unsigned sdmmc1_dat1_py6_pins[] = { + TEGRA_PIN_SDMMC1_DAT1_PY6, +}; + +static const unsigned sdmmc1_dat0_py7_pins[] = { + TEGRA_PIN_SDMMC1_DAT0_PY7, +}; + +static const unsigned sdmmc1_clk_pz0_pins[] = { + TEGRA_PIN_SDMMC1_CLK_PZ0, +}; + +static const unsigned sdmmc1_cmd_pz1_pins[] = { + TEGRA_PIN_SDMMC1_CMD_PZ1, +}; + +static const unsigned sys_clk_req_pz5_pins[] = { + TEGRA_PIN_SYS_CLK_REQ_PZ5, +}; + +static const unsigned pwr_i2c_scl_pz6_pins[] = { + TEGRA_PIN_PWR_I2C_SCL_PZ6, +}; + +static const unsigned pwr_i2c_sda_pz7_pins[] = { + TEGRA_PIN_PWR_I2C_SDA_PZ7, +}; + +static const unsigned sdmmc4_dat0_paa0_pins[] = { + TEGRA_PIN_SDMMC4_DAT0_PAA0, +}; + +static const unsigned sdmmc4_dat1_paa1_pins[] = { + TEGRA_PIN_SDMMC4_DAT1_PAA1, +}; + +static const unsigned sdmmc4_dat2_paa2_pins[] = { + TEGRA_PIN_SDMMC4_DAT2_PAA2, +}; + +static const unsigned sdmmc4_dat3_paa3_pins[] = { + TEGRA_PIN_SDMMC4_DAT3_PAA3, +}; + +static const unsigned sdmmc4_dat4_paa4_pins[] = { + TEGRA_PIN_SDMMC4_DAT4_PAA4, +}; + +static const unsigned sdmmc4_dat5_paa5_pins[] = { + TEGRA_PIN_SDMMC4_DAT5_PAA5, +}; + +static const unsigned sdmmc4_dat6_paa6_pins[] = { + TEGRA_PIN_SDMMC4_DAT6_PAA6, +}; + +static const unsigned sdmmc4_dat7_paa7_pins[] = { + TEGRA_PIN_SDMMC4_DAT7_PAA7, +}; + +static const unsigned pbb0_pins[] = { + TEGRA_PIN_PBB0, +}; + +static const unsigned cam_i2c_scl_pbb1_pins[] = { + TEGRA_PIN_CAM_I2C_SCL_PBB1, +}; + +static const unsigned cam_i2c_sda_pbb2_pins[] = { + TEGRA_PIN_CAM_I2C_SDA_PBB2, +}; + +static const unsigned pbb3_pins[] = { + TEGRA_PIN_PBB3, +}; + +static const unsigned pbb4_pins[] = { + TEGRA_PIN_PBB4, +}; + +static const unsigned pbb5_pins[] = { + TEGRA_PIN_PBB5, +}; + +static const unsigned pbb6_pins[] = { + TEGRA_PIN_PBB6, +}; + +static const unsigned pbb7_pins[] = { + TEGRA_PIN_PBB7, +}; + +static const unsigned cam_mclk_pcc0_pins[] = { + TEGRA_PIN_CAM_MCLK_PCC0, +}; + +static const unsigned pcc1_pins[] = { + TEGRA_PIN_PCC1, +}; + +static const unsigned pcc2_pins[] = { + TEGRA_PIN_PCC2, +}; + +static const unsigned sdmmc4_clk_pcc4_pins[] = { + TEGRA_PIN_SDMMC4_CLK_PCC4, +}; + +static const unsigned clk2_req_pcc5_pins[] = { + TEGRA_PIN_CLK2_REQ_PCC5, +}; + +static const unsigned clk3_out_pee0_pins[] = { + TEGRA_PIN_CLK3_OUT_PEE0, +}; + +static const unsigned clk3_req_pee1_pins[] = { + TEGRA_PIN_CLK3_REQ_PEE1, +}; + +static const unsigned clk1_req_pee2_pins[] = { + TEGRA_PIN_CLK1_REQ_PEE2, +}; + +static const unsigned hdmi_cec_pee3_pins[] = { + TEGRA_PIN_HDMI_CEC_PEE3, +}; + +static const unsigned sdmmc3_clk_lb_out_pee4_pins[] = { + TEGRA_PIN_SDMMC3_CLK_LB_OUT_PEE4, +}; + +static const unsigned sdmmc3_clk_lb_in_pee5_pins[] = { + TEGRA_PIN_SDMMC3_CLK_LB_IN_PEE5, +}; + +static const unsigned core_pwr_req_pins[] = { + TEGRA_PIN_CORE_PWR_REQ, +}; + +static const unsigned cpu_pwr_req_pins[] = { + TEGRA_PIN_CPU_PWR_REQ, +}; + +static const unsigned owr_pins[] = { + TEGRA_PIN_OWR, +}; + +static const unsigned pwr_int_n_pins[] = { + TEGRA_PIN_PWR_INT_N, +}; + +static const unsigned reset_out_n_pins[] = { + TEGRA_PIN_RESET_OUT_N, +}; + +static const unsigned drive_ao1_pins[] = { + TEGRA_PIN_KB_ROW0_PR0, + TEGRA_PIN_KB_ROW1_PR1, + TEGRA_PIN_KB_ROW2_PR2, + TEGRA_PIN_KB_ROW3_PR3, + TEGRA_PIN_KB_ROW4_PR4, + TEGRA_PIN_KB_ROW5_PR5, + TEGRA_PIN_KB_ROW6_PR6, + TEGRA_PIN_KB_ROW7_PR7, + TEGRA_PIN_PWR_I2C_SCL_PZ6, + TEGRA_PIN_PWR_I2C_SDA_PZ7, +}; + +static const unsigned drive_ao2_pins[] = { + TEGRA_PIN_CLK_32K_OUT_PA0, + TEGRA_PIN_KB_COL0_PQ0, + TEGRA_PIN_KB_COL1_PQ1, + TEGRA_PIN_KB_COL2_PQ2, + TEGRA_PIN_KB_COL3_PQ3, + TEGRA_PIN_KB_COL4_PQ4, + TEGRA_PIN_KB_COL5_PQ5, + TEGRA_PIN_KB_COL6_PQ6, + TEGRA_PIN_KB_COL7_PQ7, + TEGRA_PIN_KB_ROW8_PS0, + TEGRA_PIN_KB_ROW9_PS1, + TEGRA_PIN_KB_ROW10_PS2, + TEGRA_PIN_SYS_CLK_REQ_PZ5, + TEGRA_PIN_CORE_PWR_REQ, + TEGRA_PIN_CPU_PWR_REQ, + TEGRA_PIN_RESET_OUT_N, +}; + +static const unsigned drive_at1_pins[] = { + TEGRA_PIN_GMI_AD8_PH0, + TEGRA_PIN_GMI_AD9_PH1, + TEGRA_PIN_GMI_AD10_PH2, + TEGRA_PIN_GMI_AD11_PH3, + TEGRA_PIN_GMI_AD12_PH4, + TEGRA_PIN_GMI_AD13_PH5, + TEGRA_PIN_GMI_AD14_PH6, + TEGRA_PIN_GMI_AD15_PH7, + + TEGRA_PIN_GMI_IORDY_PI5, + TEGRA_PIN_GMI_CS7_N_PI6, +}; + +static const unsigned drive_at2_pins[] = { + TEGRA_PIN_GMI_AD0_PG0, + TEGRA_PIN_GMI_AD1_PG1, + TEGRA_PIN_GMI_AD2_PG2, + TEGRA_PIN_GMI_AD3_PG3, + TEGRA_PIN_GMI_AD4_PG4, + TEGRA_PIN_GMI_AD5_PG5, + TEGRA_PIN_GMI_AD6_PG6, + TEGRA_PIN_GMI_AD7_PG7, + + TEGRA_PIN_GMI_WR_N_PI0, + TEGRA_PIN_GMI_OE_N_PI1, + TEGRA_PIN_GMI_CS6_N_PI3, + TEGRA_PIN_GMI_RST_N_PI4, + TEGRA_PIN_GMI_WAIT_PI7, + + TEGRA_PIN_GMI_DQS_P_PJ3, + + TEGRA_PIN_GMI_ADV_N_PK0, + TEGRA_PIN_GMI_CLK_PK1, + TEGRA_PIN_GMI_CS4_N_PK2, + TEGRA_PIN_GMI_CS2_N_PK3, + TEGRA_PIN_GMI_CS3_N_PK4, +}; + +static const unsigned drive_at3_pins[] = { + TEGRA_PIN_GMI_WP_N_PC7, + TEGRA_PIN_GMI_CS0_N_PJ0, +}; + +static const unsigned drive_at4_pins[] = { + TEGRA_PIN_GMI_A17_PB0, + TEGRA_PIN_GMI_A18_PB1, + TEGRA_PIN_GMI_CS1_N_PJ2, + TEGRA_PIN_GMI_A16_PJ7, + TEGRA_PIN_GMI_A19_PK7, +}; + +static const unsigned drive_at5_pins[] = { + TEGRA_PIN_GEN2_I2C_SCL_PT5, + TEGRA_PIN_GEN2_I2C_SDA_PT6, +}; + +static const unsigned drive_cdev1_pins[] = { + TEGRA_PIN_CLK1_OUT_PW4, + TEGRA_PIN_CLK1_REQ_PEE2, +}; + +static const unsigned drive_cdev2_pins[] = { + TEGRA_PIN_CLK2_OUT_PW5, + TEGRA_PIN_CLK2_REQ_PCC5, + TEGRA_PIN_SDMMC1_WP_N_PV3, +}; + +static const unsigned drive_dap1_pins[] = { + TEGRA_PIN_DAP1_FS_PN0, + TEGRA_PIN_DAP1_DIN_PN1, + TEGRA_PIN_DAP1_DOUT_PN2, + TEGRA_PIN_DAP1_SCLK_PN3, +}; + +static const unsigned drive_dap2_pins[] = { + TEGRA_PIN_DAP2_FS_PA2, + TEGRA_PIN_DAP2_SCLK_PA3, + TEGRA_PIN_DAP2_DIN_PA4, + TEGRA_PIN_DAP2_DOUT_PA5, +}; + +static const unsigned drive_dap3_pins[] = { + TEGRA_PIN_DAP3_FS_PP0, + TEGRA_PIN_DAP3_DIN_PP1, + TEGRA_PIN_DAP3_DOUT_PP2, + TEGRA_PIN_DAP3_SCLK_PP3, +}; + +static const unsigned drive_dap4_pins[] = { + TEGRA_PIN_DAP4_FS_PP4, + TEGRA_PIN_DAP4_DIN_PP5, + TEGRA_PIN_DAP4_DOUT_PP6, + TEGRA_PIN_DAP4_SCLK_PP7, +}; + +static const unsigned drive_dbg_pins[] = { + TEGRA_PIN_GEN1_I2C_SCL_PC4, + TEGRA_PIN_GEN1_I2C_SDA_PC5, + TEGRA_PIN_PU0, + TEGRA_PIN_PU1, + TEGRA_PIN_PU2, + TEGRA_PIN_PU3, + TEGRA_PIN_PU4, + TEGRA_PIN_PU5, + TEGRA_PIN_PU6, +}; + +static const unsigned drive_sdio3_pins[] = { + TEGRA_PIN_SDMMC3_CLK_PA6, + TEGRA_PIN_SDMMC3_CMD_PA7, + TEGRA_PIN_SDMMC3_DAT3_PB4, + TEGRA_PIN_SDMMC3_DAT2_PB5, + TEGRA_PIN_SDMMC3_DAT1_PB6, + TEGRA_PIN_SDMMC3_DAT0_PB7, + TEGRA_PIN_SDMMC3_CLK_LB_OUT_PEE4, + TEGRA_PIN_SDMMC3_CLK_LB_IN_PEE5, +}; + +static const unsigned drive_spi_pins[] = { + TEGRA_PIN_DVFS_PWM_PX0, + TEGRA_PIN_GPIO_X1_AUD_PX1, + TEGRA_PIN_DVFS_CLK_PX2, + TEGRA_PIN_GPIO_X3_AUD_PX3, + TEGRA_PIN_GPIO_X4_AUD_PX4, + TEGRA_PIN_GPIO_X5_AUD_PX5, + TEGRA_PIN_GPIO_X6_AUD_PX6, + TEGRA_PIN_GPIO_X7_AUD_PX7, + TEGRA_PIN_GPIO_W2_AUD_PW2, + TEGRA_PIN_GPIO_W3_AUD_PW3, +}; + +static const unsigned drive_uaa_pins[] = { + TEGRA_PIN_ULPI_DATA0_PO1, + TEGRA_PIN_ULPI_DATA1_PO2, + TEGRA_PIN_ULPI_DATA2_PO3, + TEGRA_PIN_ULPI_DATA3_PO4, +}; + +static const unsigned drive_uab_pins[] = { + TEGRA_PIN_ULPI_DATA7_PO0, + TEGRA_PIN_ULPI_DATA4_PO5, + TEGRA_PIN_ULPI_DATA5_PO6, + TEGRA_PIN_ULPI_DATA6_PO7, + TEGRA_PIN_PV0, + TEGRA_PIN_PV1, +}; + +static const unsigned drive_uart2_pins[] = { + TEGRA_PIN_UART2_TXD_PC2, + TEGRA_PIN_UART2_RXD_PC3, + TEGRA_PIN_UART2_CTS_N_PJ5, + TEGRA_PIN_UART2_RTS_N_PJ6, +}; + +static const unsigned drive_uart3_pins[] = { + TEGRA_PIN_UART3_CTS_N_PA1, + TEGRA_PIN_UART3_RTS_N_PC0, + TEGRA_PIN_UART3_TXD_PW6, + TEGRA_PIN_UART3_RXD_PW7, +}; + +static const unsigned drive_sdio1_pins[] = { + TEGRA_PIN_SDMMC1_DAT3_PY4, + TEGRA_PIN_SDMMC1_DAT2_PY5, + TEGRA_PIN_SDMMC1_DAT1_PY6, + TEGRA_PIN_SDMMC1_DAT0_PY7, + TEGRA_PIN_SDMMC1_CLK_PZ0, + TEGRA_PIN_SDMMC1_CMD_PZ1, +}; + +static const unsigned drive_ddc_pins[] = { + TEGRA_PIN_DDC_SCL_PV4, + TEGRA_PIN_DDC_SDA_PV5, +}; + +static const unsigned drive_gma_pins[] = { + TEGRA_PIN_SDMMC4_CLK_PCC4, + TEGRA_PIN_SDMMC4_CMD_PT7, + TEGRA_PIN_SDMMC4_DAT0_PAA0, + TEGRA_PIN_SDMMC4_DAT1_PAA1, + TEGRA_PIN_SDMMC4_DAT2_PAA2, + TEGRA_PIN_SDMMC4_DAT3_PAA3, + TEGRA_PIN_SDMMC4_DAT4_PAA4, + TEGRA_PIN_SDMMC4_DAT5_PAA5, + TEGRA_PIN_SDMMC4_DAT6_PAA6, + TEGRA_PIN_SDMMC4_DAT7_PAA7, +}; + +static const unsigned drive_gme_pins[] = { + TEGRA_PIN_PBB0, + TEGRA_PIN_CAM_I2C_SCL_PBB1, + TEGRA_PIN_CAM_I2C_SDA_PBB2, + TEGRA_PIN_PBB3, + TEGRA_PIN_PCC2, +}; + +static const unsigned drive_gmf_pins[] = { + TEGRA_PIN_PBB4, + TEGRA_PIN_PBB5, + TEGRA_PIN_PBB6, + TEGRA_PIN_PBB7, +}; + +static const unsigned drive_gmg_pins[] = { + TEGRA_PIN_CAM_MCLK_PCC0, +}; + +static const unsigned drive_gmh_pins[] = { + TEGRA_PIN_PCC1, +}; + +static const unsigned drive_owr_pins[] = { + TEGRA_PIN_SDMMC3_CD_N_PV2, +}; + +static const unsigned drive_uda_pins[] = { + TEGRA_PIN_ULPI_CLK_PY0, + TEGRA_PIN_ULPI_DIR_PY1, + TEGRA_PIN_ULPI_NXT_PY2, + TEGRA_PIN_ULPI_STP_PY3, +}; + +static const unsigned drive_dev3_pins[] = { + TEGRA_PIN_CLK3_OUT_PEE0, + TEGRA_PIN_CLK3_REQ_PEE1, +}; + +enum tegra_mux { + TEGRA_MUX_BLINK, + TEGRA_MUX_CEC, + TEGRA_MUX_CLDVFS, + TEGRA_MUX_CLK12, + TEGRA_MUX_CPU, + TEGRA_MUX_DAP, + TEGRA_MUX_DAP1, + TEGRA_MUX_DAP2, + TEGRA_MUX_DEV3, + TEGRA_MUX_DISPLAYA, + TEGRA_MUX_DISPLAYA_ALT, + TEGRA_MUX_DISPLAYB, + TEGRA_MUX_DTV, + TEGRA_MUX_EMC_DLL, + TEGRA_MUX_EXTPERIPH1, + TEGRA_MUX_EXTPERIPH2, + TEGRA_MUX_EXTPERIPH3, + TEGRA_MUX_GMI, + TEGRA_MUX_GMI_ALT, + TEGRA_MUX_HDA, + TEGRA_MUX_HSI, + TEGRA_MUX_I2C1, + TEGRA_MUX_I2C2, + TEGRA_MUX_I2C3, + TEGRA_MUX_I2C4, + TEGRA_MUX_I2CPWR, + TEGRA_MUX_I2S0, + TEGRA_MUX_I2S1, + TEGRA_MUX_I2S2, + TEGRA_MUX_I2S3, + TEGRA_MUX_I2S4, + TEGRA_MUX_IRDA, + TEGRA_MUX_KBC, + TEGRA_MUX_NAND, + TEGRA_MUX_NAND_ALT, + TEGRA_MUX_OWR, + TEGRA_MUX_PMI, + TEGRA_MUX_PWM0, + TEGRA_MUX_PWM1, + TEGRA_MUX_PWM2, + TEGRA_MUX_PWM3, + TEGRA_MUX_PWRON, + TEGRA_MUX_RESET_OUT_N, + TEGRA_MUX_RSVD1, + TEGRA_MUX_RSVD2, + TEGRA_MUX_RSVD3, + TEGRA_MUX_RSVD4, + TEGRA_MUX_SDMMC1, + TEGRA_MUX_SDMMC2, + TEGRA_MUX_SDMMC3, + TEGRA_MUX_SDMMC4, + TEGRA_MUX_SOC, + TEGRA_MUX_SPDIF, + TEGRA_MUX_SPI1, + TEGRA_MUX_SPI2, + TEGRA_MUX_SPI3, + TEGRA_MUX_SPI4, + TEGRA_MUX_SPI5, + TEGRA_MUX_SPI6, + TEGRA_MUX_SYSCLK, + TEGRA_MUX_TRACE, + TEGRA_MUX_UARTA, + TEGRA_MUX_UARTB, + TEGRA_MUX_UARTC, + TEGRA_MUX_UARTD, + TEGRA_MUX_ULPI, + TEGRA_MUX_USB, + TEGRA_MUX_VGP1, + TEGRA_MUX_VGP2, + TEGRA_MUX_VGP3, + TEGRA_MUX_VGP4, + TEGRA_MUX_VGP5, + TEGRA_MUX_VGP6, + TEGRA_MUX_VI, + TEGRA_MUX_VI_ALT1, + TEGRA_MUX_VI_ALT3, +}; + +static const char * const blink_groups[] = { + "clk_32k_out_pa0", +}; + +static const char * const cec_groups[] = { + "hdmi_cec_pee3", +}; + +static const char * const cldvfs_groups[] = { + "gmi_ad9_ph1", + "gmi_ad10_ph2", + "kb_row7_pr7", + "kb_row8_ps0", + "dvfs_pwm_px0", + "dvfs_clk_px2", +}; + +static const char * const clk12_groups[] = { + "sdmmc1_wp_n_pv3", + "sdmmc1_clk_pz0", +}; + +static const char * const cpu_groups[] = { + "cpu_pwr_req", +}; + +static const char * const dap_groups[] = { + "clk1_req_pee2", + "clk2_req_pcc5", +}; + +static const char * const dap1_groups[] = { + "clk1_req_pee2", +}; + +static const char * const dap2_groups[] = { + "clk1_out_pw4", + "gpio_x4_aud_px4", +}; + +static const char * const dev3_groups[] = { + "clk3_req_pee1", +}; + +static const char * const displaya_groups[] = { + "dap3_fs_pp0", + "dap3_din_pp1", + "dap3_dout_pp2", + "dap3_sclk_pp3", + "uart3_rts_n_pc0", + "pu3", + "pu4", + "pu5", + "pbb3", + "pbb4", + "pbb5", + "pbb6", + "kb_row3_pr3", + "kb_row4_pr4", + "kb_row5_pr5", + "kb_row6_pr6", + "kb_col3_pq3", + "sdmmc3_dat2_pb5", +}; + +static const char * const displaya_alt_groups[] = { + "kb_row6_pr6", +}; + +static const char * const displayb_groups[] = { + "dap3_fs_pp0", + "dap3_din_pp1", + "dap3_dout_pp2", + "dap3_sclk_pp3", + "pu3", + "pu4", + "pu5", + "pu6", + "pbb3", + "pbb4", + "pbb5", + "pbb6", + "kb_row3_pr3", + "kb_row4_pr4", + "kb_row5_pr5", + "kb_row6_pr6", + "sdmmc3_dat3_pb4", +}; + +static const char * const dtv_groups[] = { + "uart3_cts_n_pa1", + "uart3_rts_n_pc0", + "dap4_fs_pp4", + "dap4_dout_pp6", + "gmi_wait_pi7", + "gmi_ad8_ph0", + "gmi_ad14_ph6", + "gmi_ad15_ph7", +}; + +static const char * const emc_dll_groups[] = { + "kb_col0_pq0", + "kb_col1_pq1", +}; + +static const char * const extperiph1_groups[] = { + "clk1_out_pw4", +}; + +static const char * const extperiph2_groups[] = { + "clk2_out_pw5", +}; + +static const char * const extperiph3_groups[] = { + "clk3_out_pee0", +}; + +static const char * const gmi_groups[] = { + "gmi_wp_n_pc7", + + "gmi_ad0_pg0", + "gmi_ad1_pg1", + "gmi_ad2_pg2", + "gmi_ad3_pg3", + "gmi_ad4_pg4", + "gmi_ad5_pg5", + "gmi_ad6_pg6", + "gmi_ad7_pg7", + "gmi_ad8_ph0", + "gmi_ad9_ph1", + "gmi_ad10_ph2", + "gmi_ad11_ph3", + "gmi_ad12_ph4", + "gmi_ad13_ph5", + "gmi_ad14_ph6", + "gmi_ad15_ph7", + "gmi_wr_n_pi0", + "gmi_oe_n_pi1", + "gmi_cs6_n_pi3", + "gmi_rst_n_pi4", + "gmi_iordy_pi5", + "gmi_cs7_n_pi6", + "gmi_wait_pi7", + "gmi_cs0_n_pj0", + "gmi_cs1_n_pj2", + "gmi_dqs_p_pj3", + "gmi_adv_n_pk0", + "gmi_clk_pk1", + "gmi_cs4_n_pk2", + "gmi_cs2_n_pk3", + "gmi_cs3_n_pk4", + "gmi_a16_pj7", + "gmi_a17_pb0", + "gmi_a18_pb1", + "gmi_a19_pk7", + "gen2_i2c_scl_pt5", + "gen2_i2c_sda_pt6", + "sdmmc4_dat0_paa0", + "sdmmc4_dat1_paa1", + "sdmmc4_dat2_paa2", + "sdmmc4_dat3_paa3", + "sdmmc4_dat4_paa4", + "sdmmc4_dat5_paa5", + "sdmmc4_dat6_paa6", + "sdmmc4_dat7_paa7", + "sdmmc4_clk_pcc4", + "sdmmc4_cmd_pt7", + "dap1_fs_pn0", + "dap1_din_pn1", + "dap1_dout_pn2", + "dap1_sclk_pn3", +}; + +static const char * const gmi_alt_groups[] = { + "gmi_wp_n_pc7", + "gmi_cs3_n_pk4", + "gmi_a16_pj7", +}; + +static const char * const hda_groups[] = { + "dap1_fs_pn0", + "dap1_din_pn1", + "dap1_dout_pn2", + "dap1_sclk_pn3", + "dap2_fs_pa2", + "dap2_sclk_pa3", + "dap2_din_pa4", + "dap2_dout_pa5", +}; + +static const char * const hsi_groups[] = { + "ulpi_data0_po1", + "ulpi_data1_po2", + "ulpi_data2_po3", + "ulpi_data3_po4", + "ulpi_data4_po5", + "ulpi_data5_po6", + "ulpi_data6_po7", + "ulpi_data7_po0", +}; + +static const char * const i2c1_groups[] = { + "gen1_i2c_scl_pc4", + "gen1_i2c_sda_pc5", + "gpio_w2_aud_pw2", + "gpio_w3_aud_pw3", +}; + +static const char * const i2c2_groups[] = { + "gen2_i2c_scl_pt5", + "gen2_i2c_sda_pt6", +}; + +static const char * const i2c3_groups[] = { + "cam_i2c_scl_pbb1", + "cam_i2c_sda_pbb2", +}; + +static const char * const i2c4_groups[] = { + "ddc_scl_pv4", + "ddc_sda_pv5", +}; + +static const char * const i2cpwr_groups[] = { + "pwr_i2c_scl_pz6", + "pwr_i2c_sda_pz7", +}; + +static const char * const i2s0_groups[] = { + "dap1_fs_pn0", + "dap1_din_pn1", + "dap1_dout_pn2", + "dap1_sclk_pn3", +}; + +static const char * const i2s1_groups[] = { + "dap2_fs_pa2", + "dap2_sclk_pa3", + "dap2_din_pa4", + "dap2_dout_pa5", +}; + +static const char * const i2s2_groups[] = { + "dap3_fs_pp0", + "dap3_din_pp1", + "dap3_dout_pp2", + "dap3_sclk_pp3", +}; + +static const char * const i2s3_groups[] = { + "dap4_fs_pp4", + "dap4_din_pp5", + "dap4_dout_pp6", + "dap4_sclk_pp7", +}; + +static const char * const i2s4_groups[] = { + "pcc1", + "pbb0", + "pbb7", + "pcc2", +}; + +static const char * const irda_groups[] = { + "uart2_rxd_pc3", + "uart2_txd_pc2", +}; + +static const char * const kbc_groups[] = { + "kb_row0_pr0", + "kb_row1_pr1", + "kb_row2_pr2", + "kb_row3_pr3", + "kb_row4_pr4", + "kb_row5_pr5", + "kb_row6_pr6", + "kb_row7_pr7", + "kb_row8_ps0", + "kb_row9_ps1", + "kb_row10_ps2", + "kb_col0_pq0", + "kb_col1_pq1", + "kb_col2_pq2", + "kb_col3_pq3", + "kb_col4_pq4", + "kb_col5_pq5", + "kb_col6_pq6", + "kb_col7_pq7", +}; + +static const char * const nand_groups[] = { + "gmi_wp_n_pc7", + "gmi_wait_pi7", + "gmi_adv_n_pk0", + "gmi_clk_pk1", + "gmi_cs0_n_pj0", + "gmi_cs1_n_pj2", + "gmi_cs2_n_pk3", + "gmi_cs3_n_pk4", + "gmi_cs4_n_pk2", + "gmi_cs6_n_pi3", + "gmi_cs7_n_pi6", + "gmi_ad0_pg0", + "gmi_ad1_pg1", + "gmi_ad2_pg2", + "gmi_ad3_pg3", + "gmi_ad4_pg4", + "gmi_ad5_pg5", + "gmi_ad6_pg6", + "gmi_ad7_pg7", + "gmi_ad8_ph0", + "gmi_ad9_ph1", + "gmi_ad10_ph2", + "gmi_ad11_ph3", + "gmi_ad12_ph4", + "gmi_ad13_ph5", + "gmi_ad14_ph6", + "gmi_ad15_ph7", + "gmi_wr_n_pi0", + "gmi_oe_n_pi1", + "gmi_dqs_p_pj3", + "gmi_rst_n_pi4", +}; + +static const char * const nand_alt_groups[] = { + "gmi_cs6_n_pi3", + "gmi_cs7_n_pi6", + "gmi_rst_n_pi4", +}; + +static const char * const owr_groups[] = { + "pu0", + "kb_col4_pq4", + "owr", + "sdmmc3_cd_n_pv2", +}; + +static const char * const pmi_groups[] = { + "pwr_int_n", +}; + +static const char * const pwm0_groups[] = { + "sdmmc1_dat2_py5", + "uart3_rts_n_pc0", + "pu3", + "gmi_ad8_ph0", + "sdmmc3_dat3_pb4", +}; + +static const char * const pwm1_groups[] = { + "sdmmc1_dat1_py6", + "pu4", + "gmi_ad9_ph1", + "sdmmc3_dat2_pb5", +}; + +static const char * const pwm2_groups[] = { + "pu5", + "gmi_ad10_ph2", + "kb_col3_pq3", + "sdmmc3_dat1_pb6", +}; + +static const char * const pwm3_groups[] = { + "pu6", + "gmi_ad11_ph3", + "sdmmc3_cmd_pa7", +}; + +static const char * const pwron_groups[] = { + "core_pwr_req", +}; + +static const char * const reset_out_n_groups[] = { + "reset_out_n", +}; + +static const char * const rsvd1_groups[] = { + "pv1", + "hdmi_int_pn7", + "pu1", + "pu2", + "gmi_wp_n_pc7", + "gmi_adv_n_pk0", + "gmi_cs0_n_pj0", + "gmi_cs1_n_pj2", + "gmi_ad0_pg0", + "gmi_ad1_pg1", + "gmi_ad2_pg2", + "gmi_ad3_pg3", + "gmi_ad4_pg4", + "gmi_ad5_pg5", + "gmi_ad6_pg6", + "gmi_ad7_pg7", + "gmi_wr_n_pi0", + "gmi_oe_n_pi1", + "gpio_x4_aud_px4", + "gpio_x5_aud_px5", + "gpio_x7_aud_px7", + + "reset_out_n", +}; + +static const char * const rsvd2_groups[] = { + "pv0", + "pv1", + "sdmmc1_dat0_py7", + "clk2_out_pw5", + "clk2_req_pcc5", + "hdmi_int_pn7", + "ddc_scl_pv4", + "ddc_sda_pv5", + "uart3_txd_pw6", + "uart3_rxd_pw7", + "gen1_i2c_scl_pc4", + "gen1_i2c_sda_pc5", + "dap4_fs_pp4", + "dap4_din_pp5", + "dap4_dout_pp6", + "dap4_sclk_pp7", + "clk3_out_pee0", + "clk3_req_pee1", + "gmi_iordy_pi5", + "gmi_a17_pb0", + "gmi_a18_pb1", + "gen2_i2c_scl_pt5", + "gen2_i2c_sda_pt6", + "sdmmc4_clk_pcc4", + "sdmmc4_cmd_pt7", + "sdmmc4_dat7_paa7", + "pcc1", + "pbb7", + "pcc2", + "pwr_i2c_scl_pz6", + "pwr_i2c_sda_pz7", + "kb_row0_pr0", + "kb_row1_pr1", + "kb_row2_pr2", + "kb_row7_pr7", + "kb_row8_ps0", + "kb_row9_ps1", + "kb_row10_ps2", + "kb_col1_pq1", + "kb_col2_pq2", + "kb_col5_pq5", + "kb_col6_pq6", + "kb_col7_pq7", + "sys_clk_req_pz5", + "core_pwr_req", + "cpu_pwr_req", + "pwr_int_n", + "owr", + "spdif_out_pk5", + "gpio_x1_aud_px1", + "sdmmc3_clk_pa6", + "sdmmc3_dat0_pb7", + "gpio_w2_aud_pw2", + "usb_vbus_en0_pn4", + "usb_vbus_en1_pn5", + "sdmmc3_clk_lb_out_pee4", + "sdmmc3_clk_lb_in_pee5", + "reset_out_n", +}; + +static const char * const rsvd3_groups[] = { + "pv0", + "pv1", + "sdmmc1_clk_pz0", + "clk2_out_pw5", + "clk2_req_pcc5", + "hdmi_int_pn7", + "ddc_scl_pv4", + "ddc_sda_pv5", + "uart2_rts_n_pj6", + "uart2_cts_n_pj5", + "uart3_txd_pw6", + "uart3_rxd_pw7", + "pu0", + "pu1", + "pu2", + "gen1_i2c_scl_pc4", + "gen1_i2c_sda_pc5", + "dap4_din_pp5", + "dap4_sclk_pp7", + "clk3_out_pee0", + "clk3_req_pee1", + "pcc1", + "cam_i2c_scl_pbb1", + "cam_i2c_sda_pbb2", + "pbb7", + "pcc2", + "pwr_i2c_scl_pz6", + "pwr_i2c_sda_pz7", + "kb_row0_pr0", + "kb_row1_pr1", + "kb_row2_pr2", + "kb_row3_pr3", + "kb_row9_ps1", + "kb_row10_ps2", + "clk_32k_out_pa0", + "sys_clk_req_pz5", + "core_pwr_req", + "cpu_pwr_req", + "pwr_int_n", + "owr", + "clk1_req_pee2", + "clk1_out_pw4", + "spdif_out_pk5", + "spdif_in_pk6", + "dap2_fs_pa2", + "dap2_sclk_pa3", + "dap2_din_pa4", + "dap2_dout_pa5", + "dvfs_pwm_px0", + "gpio_x1_aud_px1", + "gpio_x3_aud_px3", + "dvfs_clk_px2", + "sdmmc3_clk_pa6", + "sdmmc3_dat0_pb7", + "hdmi_cec_pee3", + "sdmmc3_cd_n_pv2", + "usb_vbus_en0_pn4", + "usb_vbus_en1_pn5", + "sdmmc3_clk_lb_out_pee4", + "sdmmc3_clk_lb_in_pee5", + "reset_out_n", +}; + +static const char * const rsvd4_groups[] = { + "pv0", + "pv1", + "sdmmc1_clk_pz0", + "clk2_out_pw5", + "clk2_req_pcc5", + "hdmi_int_pn7", + "ddc_scl_pv4", + "ddc_sda_pv5", + "pu0", + "pu1", + "pu2", + "gen1_i2c_scl_pc4", + "gen1_i2c_sda_pc5", + "dap4_fs_pp4", + "dap4_din_pp5", + "dap4_dout_pp6", + "dap4_sclk_pp7", + "clk3_out_pee0", + "clk3_req_pee1", + "gmi_ad0_pg0", + "gmi_ad1_pg1", + "gmi_ad2_pg2", + "gmi_ad3_pg3", + "gmi_ad4_pg4", + "gmi_ad12_ph4", + "gmi_ad13_ph5", + "gmi_rst_n_pi4", + "gen2_i2c_scl_pt5", + "gen2_i2c_sda_pt6", + "sdmmc4_clk_pcc4", + "sdmmc4_cmd_pt7", + "sdmmc4_dat0_paa0", + "sdmmc4_dat1_paa1", + "sdmmc4_dat2_paa2", + "sdmmc4_dat3_paa3", + "sdmmc4_dat4_paa4", + "sdmmc4_dat5_paa5", + "sdmmc4_dat6_paa6", + "sdmmc4_dat7_paa7", + "cam_mclk_pcc0", + "pcc1", + "cam_i2c_scl_pbb1", + "cam_i2c_sda_pbb2", + "pbb3", + "pbb4", + "pbb5", + "pbb6", + "pbb7", + "pcc2", + "pwr_i2c_scl_pz6", + "pwr_i2c_sda_pz7", + "kb_row0_pr0", + "kb_row1_pr1", + "kb_row2_pr2", + "kb_col2_pq2", + "kb_col5_pq5", + "kb_col6_pq6", + "kb_col7_pq7", + "clk_32k_out_pa0", + "sys_clk_req_pz5", + "core_pwr_req", + "cpu_pwr_req", + "pwr_int_n", + "owr", + "dap1_fs_pn0", + "dap1_din_pn1", + "dap1_dout_pn2", + "dap1_sclk_pn3", + "clk1_req_pee2", + "clk1_out_pw4", + "spdif_in_pk6", + "spdif_out_pk5", + "dap2_fs_pa2", + "dap2_sclk_pa3", + "dap2_din_pa4", + "dap2_dout_pa5", + "dvfs_pwm_px0", + "gpio_x1_aud_px1", + "gpio_x3_aud_px3", + "dvfs_clk_px2", + "gpio_x5_aud_px5", + "gpio_x6_aud_px6", + "gpio_x7_aud_px7", + "sdmmc3_cd_n_pv2", + "usb_vbus_en0_pn4", + "usb_vbus_en1_pn5", + "sdmmc3_clk_lb_in_pee5", + "sdmmc3_clk_lb_out_pee4", +}; + +static const char * const sdmmc1_groups[] = { + + "sdmmc1_clk_pz0", + "sdmmc1_cmd_pz1", + "sdmmc1_dat3_py4", + "sdmmc1_dat2_py5", + "sdmmc1_dat1_py6", + "sdmmc1_dat0_py7", + "uart3_cts_n_pa1", + "kb_col5_pq5", + "sdmmc1_wp_n_pv3", +}; + +static const char * const sdmmc2_groups[] = { + "gmi_iordy_pi5", + "gmi_clk_pk1", + "gmi_cs2_n_pk3", + "gmi_cs3_n_pk4", + "gmi_cs7_n_pi6", + "gmi_ad12_ph4", + "gmi_ad13_ph5", + "gmi_ad14_ph6", + "gmi_ad15_ph7", + "gmi_dqs_p_pj3", +}; + +static const char * const sdmmc3_groups[] = { + "kb_col4_pq4", + "sdmmc3_clk_pa6", + "sdmmc3_cmd_pa7", + "sdmmc3_dat0_pb7", + "sdmmc3_dat1_pb6", + "sdmmc3_dat2_pb5", + "sdmmc3_dat3_pb4", + "hdmi_cec_pee3", + "sdmmc3_cd_n_pv2", + "sdmmc3_clk_lb_in_pee5", + "sdmmc3_clk_lb_out_pee4", +}; + +static const char * const sdmmc4_groups[] = { + "sdmmc4_clk_pcc4", + "sdmmc4_cmd_pt7", + "sdmmc4_dat0_paa0", + "sdmmc4_dat1_paa1", + "sdmmc4_dat2_paa2", + "sdmmc4_dat3_paa3", + "sdmmc4_dat4_paa4", + "sdmmc4_dat5_paa5", + "sdmmc4_dat6_paa6", + "sdmmc4_dat7_paa7", +}; + +static const char * const soc_groups[] = { + "gmi_cs1_n_pj2", + "gmi_oe_n_pi1", + "clk_32k_out_pa0", + "hdmi_cec_pee3", +}; + +static const char * const spdif_groups[] = { + "sdmmc1_cmd_pz1", + "sdmmc1_dat3_py4", + "uart2_rxd_pc3", + "uart2_txd_pc2", + "spdif_in_pk6", + "spdif_out_pk5", +}; + +static const char * const spi1_groups[] = { + "ulpi_clk_py0", + "ulpi_dir_py1", + "ulpi_nxt_py2", + "ulpi_stp_py3", + "gpio_x3_aud_px3", + "gpio_x4_aud_px4", + "gpio_x5_aud_px5", + "gpio_x6_aud_px6", + "gpio_x7_aud_px7", + "gpio_w3_aud_pw3", +}; + +static const char * const spi2_groups[] = { + "ulpi_data4_po5", + "ulpi_data5_po6", + "ulpi_data6_po7", + "ulpi_data7_po0", + "kb_row4_pr4", + "kb_row5_pr5", + "kb_col0_pq0", + "kb_col1_pq1", + "kb_col2_pq2", + "kb_col6_pq6", + "kb_col7_pq7", + "gpio_x4_aud_px4", + "gpio_x5_aud_px5", + "gpio_x6_aud_px6", + "gpio_x7_aud_px7", + "gpio_w2_aud_pw2", + "gpio_w3_aud_pw3", +}; + +static const char * const spi3_groups[] = { + "ulpi_data0_po1", + "ulpi_data1_po2", + "ulpi_data2_po3", + "ulpi_data3_po4", + "sdmmc4_dat0_paa0", + "sdmmc4_dat1_paa1", + "sdmmc4_dat2_paa2", + "sdmmc4_dat3_paa3", + "sdmmc4_dat4_paa4", + "sdmmc4_dat5_paa5", + "sdmmc4_dat6_paa6", + "sdmmc3_clk_pa6", + "sdmmc3_cmd_pa7", + "sdmmc3_dat0_pb7", + "sdmmc3_dat1_pb6", + "sdmmc3_dat2_pb5", + "sdmmc3_dat3_pb4", +}; + +static const char * const spi4_groups[] = { + "sdmmc1_cmd_pz1", + "sdmmc1_dat3_py4", + "sdmmc1_dat2_py5", + "sdmmc1_dat1_py6", + "sdmmc1_dat0_py7", + "uart2_rxd_pc3", + "uart2_txd_pc2", + "uart2_rts_n_pj6", + "uart2_cts_n_pj5", + "uart3_txd_pw6", + "uart3_rxd_pw7", + "uart3_cts_n_pa1", + "gmi_wait_pi7", + "gmi_cs6_n_pi3", + "gmi_ad5_pg5", + "gmi_ad6_pg6", + "gmi_ad7_pg7", + "gmi_a19_pk7", + "gmi_wr_n_pi0", + "sdmmc1_wp_n_pv3", +}; + +static const char * const spi5_groups[] = { + "ulpi_clk_py0", + "ulpi_dir_py1", + "ulpi_nxt_py2", + "ulpi_stp_py3", + "dap3_fs_pp0", + "dap3_din_pp1", + "dap3_dout_pp2", + "dap3_sclk_pp3", +}; + +static const char * const spi6_groups[] = { + "dvfs_pwm_px0", + "gpio_x1_aud_px1", + "gpio_x3_aud_px3", + "dvfs_clk_px2", + "gpio_x6_aud_px6", + "gpio_w2_aud_pw2", + "gpio_w3_aud_pw3", +}; + +static const char * const sysclk_groups[] = { + "sys_clk_req_pz5", +}; + +static const char * const trace_groups[] = { + "gmi_iordy_pi5", + "gmi_adv_n_pk0", + "gmi_clk_pk1", + "gmi_cs2_n_pk3", + "gmi_cs4_n_pk2", + "gmi_a16_pj7", + "gmi_a17_pb0", + "gmi_a18_pb1", + "gmi_a19_pk7", + "gmi_dqs_p_pj3", +}; + +static const char * const uarta_groups[] = { + "ulpi_data0_po1", + "ulpi_data1_po2", + "ulpi_data2_po3", + "ulpi_data3_po4", + "ulpi_data4_po5", + "ulpi_data5_po6", + "ulpi_data6_po7", + "ulpi_data7_po0", + "sdmmc1_cmd_pz1", + "sdmmc1_dat3_py4", + "sdmmc1_dat2_py5", + "sdmmc1_dat1_py6", + "sdmmc1_dat0_py7", + "uart2_rxd_pc3", + "uart2_txd_pc2", + "uart2_rts_n_pj6", + "uart2_cts_n_pj5", + "pu0", + "pu1", + "pu2", + "pu3", + "pu4", + "pu5", + "pu6", + "kb_row7_pr7", + "kb_row8_ps0", + "kb_row9_ps1", + "kb_row10_ps2", + "kb_col3_pq3", + "kb_col4_pq4", + "sdmmc3_cmd_pa7", + "sdmmc3_dat1_pb6", + "sdmmc1_wp_n_pv3", +}; + +static const char * const uartb_groups[] = { + "uart2_rts_n_pj6", + "uart2_cts_n_pj5", +}; + +static const char * const uartc_groups[] = { + "uart3_txd_pw6", + "uart3_rxd_pw7", + "uart3_cts_n_pa1", + "uart3_rts_n_pc0", +}; + +static const char * const uartd_groups[] = { + "ulpi_clk_py0", + "ulpi_dir_py1", + "ulpi_nxt_py2", + "ulpi_stp_py3", + "gmi_a16_pj7", + "gmi_a17_pb0", + "gmi_a18_pb1", + "gmi_a19_pk7", +}; + +static const char * const ulpi_groups[] = { + "ulpi_data0_po1", + "ulpi_data1_po2", + "ulpi_data2_po3", + "ulpi_data3_po4", + "ulpi_data4_po5", + "ulpi_data5_po6", + "ulpi_data6_po7", + "ulpi_data7_po0", + "ulpi_clk_py0", + "ulpi_dir_py1", + "ulpi_nxt_py2", + "ulpi_stp_py3", +}; + +static const char * const usb_groups[] = { + "pv0", + "pu6", + "gmi_cs0_n_pj0", + "gmi_cs4_n_pk2", + "gmi_ad11_ph3", + "kb_col0_pq0", + "spdif_in_pk6", + "usb_vbus_en0_pn4", + "usb_vbus_en1_pn5", +}; + +static const char * const vgp1_groups[] = { + "cam_i2c_scl_pbb1", +}; + +static const char * const vgp2_groups[] = { + "cam_i2c_sda_pbb2", +}; + +static const char * const vgp3_groups[] = { + "pbb3", +}; + +static const char * const vgp4_groups[] = { + "pbb4", +}; + +static const char * const vgp5_groups[] = { + "pbb5", +}; + +static const char * const vgp6_groups[] = { + "pbb6", +}; + +static const char * const vi_groups[] = { + "cam_mclk_pcc0", + "pbb0", +}; + +static const char * const vi_alt1_groups[] = { + "cam_mclk_pcc0", + "pbb0", +}; + +static const char * const vi_alt3_groups[] = { + "cam_mclk_pcc0", + "pbb0", +}; + +#define FUNCTION(fname) \ + { \ + .name = #fname, \ + .groups = fname##_groups, \ + .ngroups = ARRAY_SIZE(fname##_groups), \ + } + +static const struct tegra_function tegra114_functions[] = { + FUNCTION(blink), + FUNCTION(cec), + FUNCTION(cldvfs), + FUNCTION(clk12), + FUNCTION(cpu), + FUNCTION(dap), + FUNCTION(dap1), + FUNCTION(dap2), + FUNCTION(dev3), + FUNCTION(displaya), + FUNCTION(displaya_alt), + FUNCTION(displayb), + FUNCTION(dtv), + FUNCTION(emc_dll), + FUNCTION(extperiph1), + FUNCTION(extperiph2), + FUNCTION(extperiph3), + FUNCTION(gmi), + FUNCTION(gmi_alt), + FUNCTION(hda), + FUNCTION(hsi), + FUNCTION(i2c1), + FUNCTION(i2c2), + FUNCTION(i2c3), + FUNCTION(i2c4), + FUNCTION(i2cpwr), + FUNCTION(i2s0), + FUNCTION(i2s1), + FUNCTION(i2s2), + FUNCTION(i2s3), + FUNCTION(i2s4), + FUNCTION(irda), + FUNCTION(kbc), + FUNCTION(nand), + FUNCTION(nand_alt), + FUNCTION(owr), + FUNCTION(pmi), + FUNCTION(pwm0), + FUNCTION(pwm1), + FUNCTION(pwm2), + FUNCTION(pwm3), + FUNCTION(pwron), + FUNCTION(reset_out_n), + FUNCTION(rsvd1), + FUNCTION(rsvd2), + FUNCTION(rsvd3), + FUNCTION(rsvd4), + FUNCTION(sdmmc1), + FUNCTION(sdmmc2), + FUNCTION(sdmmc3), + FUNCTION(sdmmc4), + FUNCTION(soc), + FUNCTION(spdif), + FUNCTION(spi1), + FUNCTION(spi2), + FUNCTION(spi3), + FUNCTION(spi4), + FUNCTION(spi5), + FUNCTION(spi6), + FUNCTION(sysclk), + FUNCTION(trace), + FUNCTION(uarta), + FUNCTION(uartb), + FUNCTION(uartc), + FUNCTION(uartd), + FUNCTION(ulpi), + FUNCTION(usb), + FUNCTION(vgp1), + FUNCTION(vgp2), + FUNCTION(vgp3), + FUNCTION(vgp4), + FUNCTION(vgp5), + FUNCTION(vgp6), + FUNCTION(vi), + FUNCTION(vi_alt1), + FUNCTION(vi_alt3), +}; + +#define DRV_PINGROUP_REG_START 0x868 /* bank 0 */ +#define PINGROUP_REG_START 0x3000 /* bank 1 */ + +#define PINGROUP_REG_Y(r) ((r) - PINGROUP_REG_START) +#define PINGROUP_REG_N(r) -1 + +#define PINGROUP(pg_name, f0, f1, f2, f3, f_safe, r, od, ior, rcv_sel) \ + { \ + .name = #pg_name, \ + .pins = pg_name##_pins, \ + .npins = ARRAY_SIZE(pg_name##_pins), \ + .funcs = { \ + TEGRA_MUX_##f0, \ + TEGRA_MUX_##f1, \ + TEGRA_MUX_##f2, \ + TEGRA_MUX_##f3, \ + }, \ + .func_safe = TEGRA_MUX_##f_safe, \ + .mux_reg = PINGROUP_REG_Y(r), \ + .mux_bank = 1, \ + .mux_bit = 0, \ + .pupd_reg = PINGROUP_REG_Y(r), \ + .pupd_bank = 1, \ + .pupd_bit = 2, \ + .tri_reg = PINGROUP_REG_Y(r), \ + .tri_bank = 1, \ + .tri_bit = 4, \ + .einput_reg = PINGROUP_REG_Y(r), \ + .einput_bank = 1, \ + .einput_bit = 5, \ + .odrain_reg = PINGROUP_REG_##od(r), \ + .odrain_bank = 1, \ + .odrain_bit = 6, \ + .lock_reg = PINGROUP_REG_Y(r), \ + .lock_bank = 1, \ + .lock_bit = 7, \ + .ioreset_reg = PINGROUP_REG_##ior(r), \ + .ioreset_bank = 1, \ + .ioreset_bit = 8, \ + .rcv_sel_reg = PINGROUP_REG_##rcv_sel(r), \ + .rcv_sel_bank = 1, \ + .rcv_sel_bit = 9, \ + .drv_reg = -1, \ + .drvtype_reg = -1, \ + } + +#define DRV_PINGROUP_DVRTYPE_Y(r) ((r) - DRV_PINGROUP_REG_START) +#define DRV_PINGROUP_DVRTYPE_N(r) -1 + +#define DRV_PINGROUP(pg_name, r, hsm_b, schmitt_b, lpmd_b, \ + drvdn_b, drvdn_w, drvup_b, drvup_w, \ + slwr_b, slwr_w, slwf_b, slwf_w, \ + drvtype) \ + { \ + .name = "drive_" #pg_name, \ + .pins = drive_##pg_name##_pins, \ + .npins = ARRAY_SIZE(drive_##pg_name##_pins), \ + .mux_reg = -1, \ + .pupd_reg = -1, \ + .tri_reg = -1, \ + .einput_reg = -1, \ + .odrain_reg = -1, \ + .lock_reg = -1, \ + .ioreset_reg = -1, \ + .rcv_sel_reg = -1, \ + .drv_reg = DRV_PINGROUP_DVRTYPE_Y(r), \ + .drv_bank = 0, \ + .hsm_bit = hsm_b, \ + .schmitt_bit = schmitt_b, \ + .lpmd_bit = lpmd_b, \ + .drvdn_bit = drvdn_b, \ + .drvdn_width = drvdn_w, \ + .drvup_bit = drvup_b, \ + .drvup_width = drvup_w, \ + .slwr_bit = slwr_b, \ + .slwr_width = slwr_w, \ + .slwf_bit = slwf_b, \ + .slwf_width = slwf_w, \ + .drvtype_reg = DRV_PINGROUP_DVRTYPE_##drvtype(r), \ + .drvtype_bank = 0, \ + .drvtype_bit = 6, \ + } + +static const struct tegra_pingroup tegra114_groups[] = { + /* pg_name, f0, f1, f2, f3, safe, r, od, ior, rcv_sel */ + /* FIXME: Fill in correct data in safe column */ + PINGROUP(ulpi_data0_po1, SPI3, HSI, UARTA, ULPI, ULPI, 0x3000, N, N, N), + PINGROUP(ulpi_data1_po2, SPI3, HSI, UARTA, ULPI, ULPI, 0x3004, N, N, N), + PINGROUP(ulpi_data2_po3, SPI3, HSI, UARTA, ULPI, ULPI, 0x3008, N, N, N), + PINGROUP(ulpi_data3_po4, SPI3, HSI, UARTA, ULPI, ULPI, 0x300c, N, N, N), + PINGROUP(ulpi_data4_po5, SPI2, HSI, UARTA, ULPI, ULPI, 0x3010, N, N, N), + PINGROUP(ulpi_data5_po6, SPI2, HSI, UARTA, ULPI, ULPI, 0x3014, N, N, N), + PINGROUP(ulpi_data6_po7, SPI2, HSI, UARTA, ULPI, ULPI, 0x3018, N, N, N), + PINGROUP(ulpi_data7_po0, SPI2, HSI, UARTA, ULPI, ULPI, 0x301c, N, N, N), + PINGROUP(ulpi_clk_py0, SPI1, SPI5, UARTD, ULPI, ULPI, 0x3020, N, N, N), + PINGROUP(ulpi_dir_py1, SPI1, SPI5, UARTD, ULPI, ULPI, 0x3024, N, N, N), + PINGROUP(ulpi_nxt_py2, SPI1, SPI5, UARTD, ULPI, ULPI, 0x3028, N, N, N), + PINGROUP(ulpi_stp_py3, SPI1, SPI5, UARTD, ULPI, ULPI, 0x302c, N, N, N), + PINGROUP(dap3_fs_pp0, I2S2, SPI5, DISPLAYA, DISPLAYB, I2S2, 0x3030, N, N, N), + PINGROUP(dap3_din_pp1, I2S2, SPI5, DISPLAYA, DISPLAYB, I2S2, 0x3034, N, N, N), + PINGROUP(dap3_dout_pp2, I2S2, SPI5, DISPLAYA, DISPLAYB, I2S2, 0x3038, N, N, N), + PINGROUP(dap3_sclk_pp3, I2S2, SPI5, DISPLAYA, DISPLAYB, I2S2, 0x303c, N, N, N), + PINGROUP(pv0, USB, RSVD2, RSVD3, RSVD4, RSVD4, 0x3040, N, N, N), + PINGROUP(pv1, RSVD1, RSVD2, RSVD3, RSVD4, RSVD4, 0x3044, N, N, N), + PINGROUP(sdmmc1_clk_pz0, SDMMC1, CLK12, RSVD3, RSVD4, RSVD4, 0x3048, N, N, N), + PINGROUP(sdmmc1_cmd_pz1, SDMMC1, SPDIF, SPI4, UARTA, SDMMC1, 0x304c, N, N, N), + PINGROUP(sdmmc1_dat3_py4, SDMMC1, SPDIF, SPI4, UARTA, SDMMC1, 0x3050, N, N, N), + PINGROUP(sdmmc1_dat2_py5, SDMMC1, PWM0, SPI4, UARTA, SDMMC1, 0x3054, N, N, N), + PINGROUP(sdmmc1_dat1_py6, SDMMC1, PWM1, SPI4, UARTA, SDMMC1, 0x3058, N, N, N), + PINGROUP(sdmmc1_dat0_py7, SDMMC1, RSVD2, SPI4, UARTA, RSVD2, 0x305c, N, N, N), + PINGROUP(clk2_out_pw5, EXTPERIPH2, RSVD2, RSVD3, RSVD4, RSVD4, 0x3068, N, N, N), + PINGROUP(clk2_req_pcc5, DAP, RSVD2, RSVD3, RSVD4, RSVD4, 0x306c, N, N, N), + PINGROUP(hdmi_int_pn7, RSVD1, RSVD2, RSVD3, RSVD4, RSVD4, 0x3110, N, N, Y), + PINGROUP(ddc_scl_pv4, I2C4, RSVD2, RSVD3, RSVD4, RSVD4, 0x3114, N, N, Y), + PINGROUP(ddc_sda_pv5, I2C4, RSVD2, RSVD3, RSVD4, RSVD4, 0x3118, N, N, Y), + PINGROUP(uart2_rxd_pc3, IRDA, SPDIF, UARTA, SPI4, IRDA, 0x3164, N, N, N), + PINGROUP(uart2_txd_pc2, IRDA, SPDIF, UARTA, SPI4, IRDA, 0x3168, N, N, N), + PINGROUP(uart2_rts_n_pj6, UARTA, UARTB, RSVD3, SPI4, RSVD3, 0x316c, N, N, N), + PINGROUP(uart2_cts_n_pj5, UARTA, UARTB, RSVD3, SPI4, RSVD3, 0x3170, N, N, N), + PINGROUP(uart3_txd_pw6, UARTC, RSVD2, RSVD3, SPI4, RSVD3, 0x3174, N, N, N), + PINGROUP(uart3_rxd_pw7, UARTC, RSVD2, RSVD3, SPI4, RSVD3, 0x3178, N, N, N), + PINGROUP(uart3_cts_n_pa1, UARTC, SDMMC1, DTV, SPI4, UARTC, 0x317c, N, N, N), + PINGROUP(uart3_rts_n_pc0, UARTC, PWM0, DTV, DISPLAYA, UARTC, 0x3180, N, N, N), + PINGROUP(pu0, OWR, UARTA, RSVD3, RSVD4, RSVD4, 0x3184, N, N, N), + PINGROUP(pu1, RSVD1, UARTA, RSVD3, RSVD4, RSVD4, 0x3188, N, N, N), + PINGROUP(pu2, RSVD1, UARTA, RSVD3, RSVD4, RSVD4, 0x318c, N, N, N), + PINGROUP(pu3, PWM0, UARTA, DISPLAYA, DISPLAYB, PWM0, 0x3190, N, N, N), + PINGROUP(pu4, PWM1, UARTA, DISPLAYA, DISPLAYB, PWM1, 0x3194, N, N, N), + PINGROUP(pu5, PWM2, UARTA, DISPLAYA, DISPLAYB, PWM2, 0x3198, N, N, N), + PINGROUP(pu6, PWM3, UARTA, USB, DISPLAYB, PWM3, 0x319c, N, N, N), + PINGROUP(gen1_i2c_sda_pc5, I2C1, RSVD2, RSVD3, RSVD4, RSVD4, 0x31a0, Y, N, N), + PINGROUP(gen1_i2c_scl_pc4, I2C1, RSVD2, RSVD3, RSVD4, RSVD4, 0x31a4, Y, N, N), + PINGROUP(dap4_fs_pp4, I2S3, RSVD2, DTV, RSVD4, RSVD4, 0x31a8, N, N, N), + PINGROUP(dap4_din_pp5, I2S3, RSVD2, RSVD3, RSVD4, RSVD4, 0x31ac, N, N, N), + PINGROUP(dap4_dout_pp6, I2S3, RSVD2, DTV, RSVD4, RSVD4, 0x31b0, N, N, N), + PINGROUP(dap4_sclk_pp7, I2S3, RSVD2, RSVD3, RSVD4, RSVD4, 0x31b4, N, N, N), + PINGROUP(clk3_out_pee0, EXTPERIPH3, RSVD2, RSVD3, RSVD4, RSVD4, 0x31b8, N, N, N), + PINGROUP(clk3_req_pee1, DEV3, RSVD2, RSVD3, RSVD4, RSVD4, 0x31bc, N, N, N), + PINGROUP(gmi_wp_n_pc7, RSVD1, NAND, GMI, GMI_ALT, RSVD1, 0x31c0, N, N, N), + PINGROUP(gmi_iordy_pi5, SDMMC2, RSVD2, GMI, TRACE, RSVD2, 0x31c4, N, N, N), + PINGROUP(gmi_wait_pi7, SPI4, NAND, GMI, DTV, NAND, 0x31c8, N, N, N), + PINGROUP(gmi_adv_n_pk0, RSVD1, NAND, GMI, TRACE, RSVD1, 0x31cc, N, N, N), + PINGROUP(gmi_clk_pk1, SDMMC2, NAND, GMI, TRACE, GMI, 0x31d0, N, N, N), + PINGROUP(gmi_cs0_n_pj0, RSVD1, NAND, GMI, USB, RSVD1, 0x31d4, N, N, N), + PINGROUP(gmi_cs1_n_pj2, RSVD1, NAND, GMI, SOC, RSVD1, 0x31d8, N, N, N), + PINGROUP(gmi_cs2_n_pk3, SDMMC2, NAND, GMI, TRACE, GMI, 0x31dc, N, N, N), + PINGROUP(gmi_cs3_n_pk4, SDMMC2, NAND, GMI, GMI_ALT, GMI, 0x31e0, N, N, N), + PINGROUP(gmi_cs4_n_pk2, USB, NAND, GMI, TRACE, GMI, 0x31e4, N, N, N), + PINGROUP(gmi_cs6_n_pi3, NAND, NAND_ALT, GMI, SPI4, NAND, 0x31e8, N, N, N), + PINGROUP(gmi_cs7_n_pi6, NAND, NAND_ALT, GMI, SDMMC2, NAND, 0x31ec, N, N, N), + PINGROUP(gmi_ad0_pg0, RSVD1, NAND, GMI, RSVD4, RSVD4, 0x31f0, N, N, N), + PINGROUP(gmi_ad1_pg1, RSVD1, NAND, GMI, RSVD4, RSVD4, 0x31f4, N, N, N), + PINGROUP(gmi_ad2_pg2, RSVD1, NAND, GMI, RSVD4, RSVD4, 0x31f8, N, N, N), + PINGROUP(gmi_ad3_pg3, RSVD1, NAND, GMI, RSVD4, RSVD4, 0x31fc, N, N, N), + PINGROUP(gmi_ad4_pg4, RSVD1, NAND, GMI, RSVD4, RSVD4, 0x3200, N, N, N), + PINGROUP(gmi_ad5_pg5, RSVD1, NAND, GMI, SPI4, RSVD1, 0x3204, N, N, N), + PINGROUP(gmi_ad6_pg6, RSVD1, NAND, GMI, SPI4, RSVD1, 0x3208, N, N, N), + PINGROUP(gmi_ad7_pg7, RSVD1, NAND, GMI, SPI4, RSVD1, 0x320c, N, N, N), + PINGROUP(gmi_ad8_ph0, PWM0, NAND, GMI, DTV, GMI, 0x3210, N, N, N), + PINGROUP(gmi_ad9_ph1, PWM1, NAND, GMI, CLDVFS, GMI, 0x3214, N, N, N), + PINGROUP(gmi_ad10_ph2, PWM2, NAND, GMI, CLDVFS, GMI, 0x3218, N, N, N), + PINGROUP(gmi_ad11_ph3, PWM3, NAND, GMI, USB, GMI, 0x321c, N, N, N), + PINGROUP(gmi_ad12_ph4, SDMMC2, NAND, GMI, RSVD4, RSVD4, 0x3220, N, N, N), + PINGROUP(gmi_ad13_ph5, SDMMC2, NAND, GMI, RSVD4, RSVD4, 0x3224, N, N, N), + PINGROUP(gmi_ad14_ph6, SDMMC2, NAND, GMI, DTV, GMI, 0x3228, N, N, N), + PINGROUP(gmi_ad15_ph7, SDMMC2, NAND, GMI, DTV, GMI, 0x322c, N, N, N), + PINGROUP(gmi_a16_pj7, UARTD, TRACE, GMI, GMI_ALT, GMI, 0x3230, N, N, N), + PINGROUP(gmi_a17_pb0, UARTD, RSVD2, GMI, TRACE, RSVD2, 0x3234, N, N, N), + PINGROUP(gmi_a18_pb1, UARTD, RSVD2, GMI, TRACE, RSVD2, 0x3238, N, N, N), + PINGROUP(gmi_a19_pk7, UARTD, SPI4, GMI, TRACE, GMI, 0x323c, N, N, N), + PINGROUP(gmi_wr_n_pi0, RSVD1, NAND, GMI, SPI4, RSVD1, 0x3240, N, N, N), + PINGROUP(gmi_oe_n_pi1, RSVD1, NAND, GMI, SOC, RSVD1, 0x3244, N, N, N), + PINGROUP(gmi_dqs_p_pj3, SDMMC2, NAND, GMI, TRACE, NAND, 0x3248, N, N, N), + PINGROUP(gmi_rst_n_pi4, NAND, NAND_ALT, GMI, RSVD4, RSVD4, 0x324c, N, N, N), + PINGROUP(gen2_i2c_scl_pt5, I2C2, RSVD2, GMI, RSVD4, RSVD4, 0x3250, Y, N, N), + PINGROUP(gen2_i2c_sda_pt6, I2C2, RSVD2, GMI, RSVD4, RSVD4, 0x3254, Y, N, N), + PINGROUP(sdmmc4_clk_pcc4, SDMMC4, RSVD2, GMI, RSVD4, RSVD4, 0x3258, N, Y, N), + PINGROUP(sdmmc4_cmd_pt7, SDMMC4, RSVD2, GMI, RSVD4, RSVD4, 0x325c, N, Y, N), + PINGROUP(sdmmc4_dat0_paa0, SDMMC4, SPI3, GMI, RSVD4, RSVD4, 0x3260, N, Y, N), + PINGROUP(sdmmc4_dat1_paa1, SDMMC4, SPI3, GMI, RSVD4, RSVD4, 0x3264, N, Y, N), + PINGROUP(sdmmc4_dat2_paa2, SDMMC4, SPI3, GMI, RSVD4, RSVD4, 0x3268, N, Y, N), + PINGROUP(sdmmc4_dat3_paa3, SDMMC4, SPI3, GMI, RSVD4, RSVD4, 0x326c, N, Y, N), + PINGROUP(sdmmc4_dat4_paa4, SDMMC4, SPI3, GMI, RSVD4, RSVD4, 0x3270, N, Y, N), + PINGROUP(sdmmc4_dat5_paa5, SDMMC4, SPI3, GMI, RSVD4, RSVD4, 0x3274, N, Y, N), + PINGROUP(sdmmc4_dat6_paa6, SDMMC4, SPI3, GMI, RSVD4, RSVD4, 0x3278, N, Y, N), + PINGROUP(sdmmc4_dat7_paa7, SDMMC4, RSVD2, GMI, RSVD4, RSVD4, 0x327c, N, Y, N), + PINGROUP(cam_mclk_pcc0, VI, VI_ALT1, VI_ALT3, RSVD4, RSVD4, 0x3284, N, N, N), + PINGROUP(pcc1, I2S4, RSVD2, RSVD3, RSVD4, RSVD4, 0x3288, N, N, N), + PINGROUP(pbb0, I2S4, VI, VI_ALT1, VI_ALT3, I2S4, 0x328c, N, N, N), + PINGROUP(cam_i2c_scl_pbb1, VGP1, I2C3, RSVD3, RSVD4, RSVD4, 0x3290, Y, N, N), + PINGROUP(cam_i2c_sda_pbb2, VGP2, I2C3, RSVD3, RSVD4, RSVD4, 0x3294, Y, N, N), + PINGROUP(pbb3, VGP3, DISPLAYA, DISPLAYB, RSVD4, RSVD4, 0x3298, N, N, N), + PINGROUP(pbb4, VGP4, DISPLAYA, DISPLAYB, RSVD4, RSVD4, 0x329c, N, N, N), + PINGROUP(pbb5, VGP5, DISPLAYA, DISPLAYB, RSVD4, RSVD4, 0x32a0, N, N, N), + PINGROUP(pbb6, VGP6, DISPLAYA, DISPLAYB, RSVD4, RSVD4, 0x32a4, N, N, N), + PINGROUP(pbb7, I2S4, RSVD2, RSVD3, RSVD4, RSVD4, 0x32a8, N, N, N), + PINGROUP(pcc2, I2S4, RSVD2, RSVD3, RSVD4, RSVD4, 0x32ac, N, N, N), + PINGROUP(pwr_i2c_scl_pz6, I2CPWR, RSVD2, RSVD3, RSVD4, RSVD4, 0x32b4, Y, N, N), + PINGROUP(pwr_i2c_sda_pz7, I2CPWR, RSVD2, RSVD3, RSVD4, RSVD4, 0x32b8, Y, N, N), + PINGROUP(kb_row0_pr0, KBC, RSVD2, RSVD3, RSVD4, RSVD4, 0x32bc, N, N, N), + PINGROUP(kb_row1_pr1, KBC, RSVD2, RSVD3, RSVD4, RSVD4, 0x32c0, N, N, N), + PINGROUP(kb_row2_pr2, KBC, RSVD2, RSVD3, RSVD4, RSVD4, 0x32c4, N, N, N), + PINGROUP(kb_row3_pr3, KBC, DISPLAYA, RSVD3, DISPLAYB, RSVD3, 0x32c8, N, N, N), + PINGROUP(kb_row4_pr4, KBC, DISPLAYA, SPI2, DISPLAYB, KBC, 0x32cc, N, N, N), + PINGROUP(kb_row5_pr5, KBC, DISPLAYA, SPI2, DISPLAYB, KBC, 0x32d0, N, N, N), + PINGROUP(kb_row6_pr6, KBC, DISPLAYA, DISPLAYA_ALT, DISPLAYB, KBC, 0x32d4, N, N, N), + PINGROUP(kb_row7_pr7, KBC, RSVD2, CLDVFS, UARTA, RSVD2, 0x32d8, N, N, N), + PINGROUP(kb_row8_ps0, KBC, RSVD2, CLDVFS, UARTA, RSVD2, 0x32dc, N, N, N), + PINGROUP(kb_row9_ps1, KBC, RSVD2, RSVD3, UARTA, RSVD3, 0x32e0, N, N, N), + PINGROUP(kb_row10_ps2, KBC, RSVD2, RSVD3, UARTA, RSVD3, 0x32e4, N, N, N), + PINGROUP(kb_col0_pq0, KBC, USB, SPI2, EMC_DLL, KBC, 0x32fc, N, N, N), + PINGROUP(kb_col1_pq1, KBC, RSVD2, SPI2, EMC_DLL, RSVD2, 0x3300, N, N, N), + PINGROUP(kb_col2_pq2, KBC, RSVD2, SPI2, RSVD4, RSVD2, 0x3304, N, N, N), + PINGROUP(kb_col3_pq3, KBC, DISPLAYA, PWM2, UARTA, KBC, 0x3308, N, N, N), + PINGROUP(kb_col4_pq4, KBC, OWR, SDMMC3, UARTA, KBC, 0x330c, N, N, N), + PINGROUP(kb_col5_pq5, KBC, RSVD2, SDMMC1, RSVD4, RSVD4, 0x3310, N, N, N), + PINGROUP(kb_col6_pq6, KBC, RSVD2, SPI2, RSVD4, RSVD4, 0x3314, N, N, N), + PINGROUP(kb_col7_pq7, KBC, RSVD2, SPI2, RSVD4, RSVD4, 0x3318, N, N, N), + PINGROUP(clk_32k_out_pa0, BLINK, SOC, RSVD3, RSVD4, RSVD4, 0x331c, N, N, N), + PINGROUP(sys_clk_req_pz5, SYSCLK, RSVD2, RSVD3, RSVD4, RSVD4, 0x3320, N, N, N), + PINGROUP(core_pwr_req, PWRON, RSVD2, RSVD3, RSVD4, RSVD4, 0x3324, N, N, N), + PINGROUP(cpu_pwr_req, CPU, RSVD2, RSVD3, RSVD4, RSVD4, 0x3328, N, N, N), + PINGROUP(pwr_int_n, PMI, RSVD2, RSVD3, RSVD4, RSVD4, 0x332c, N, N, N), + PINGROUP(owr, OWR, RSVD2, RSVD3, RSVD4, RSVD4, 0x3334, N, N, Y), + PINGROUP(dap1_fs_pn0, I2S0, HDA, GMI, RSVD4, RSVD4, 0x3338, N, N, N), + PINGROUP(dap1_din_pn1, I2S0, HDA, GMI, RSVD4, RSVD4, 0x333c, N, N, N), + PINGROUP(dap1_dout_pn2, I2S0, HDA, GMI, RSVD4, RSVD4, 0x3340, N, N, N), + PINGROUP(dap1_sclk_pn3, I2S0, HDA, GMI, RSVD4, RSVD4, 0x3344, N, N, N), + PINGROUP(clk1_req_pee2, DAP, DAP1, RSVD3, RSVD4, RSVD4, 0x3348, N, N, N), + PINGROUP(clk1_out_pw4, EXTPERIPH1, DAP2, RSVD3, RSVD4, RSVD4, 0x334c, N, N, N), + PINGROUP(spdif_in_pk6, SPDIF, USB, RSVD3, RSVD4, RSVD4, 0x3350, N, N, N), + PINGROUP(spdif_out_pk5, SPDIF, RSVD2, RSVD3, RSVD4, RSVD4, 0x3354, N, N, N), + PINGROUP(dap2_fs_pa2, I2S1, HDA, RSVD3, RSVD4, RSVD4, 0x3358, N, N, N), + PINGROUP(dap2_din_pa4, I2S1, HDA, RSVD3, RSVD4, RSVD4, 0x335c, N, N, N), + PINGROUP(dap2_dout_pa5, I2S1, HDA, RSVD3, RSVD4, RSVD4, 0x3360, N, N, N), + PINGROUP(dap2_sclk_pa3, I2S1, HDA, RSVD3, RSVD4, RSVD4, 0x3364, N, N, N), + PINGROUP(dvfs_pwm_px0, SPI6, CLDVFS, RSVD3, RSVD4, RSVD4, 0x3368, N, N, N), + PINGROUP(gpio_x1_aud_px1, SPI6, RSVD2, RSVD3, RSVD4, RSVD4, 0x336c, N, N, N), + PINGROUP(gpio_x3_aud_px3, SPI6, SPI1, RSVD3, RSVD4, RSVD4, 0x3370, N, N, N), + PINGROUP(dvfs_clk_px2, SPI6, CLDVFS, RSVD3, RSVD4, RSVD4, 0x3374, N, N, N), + PINGROUP(gpio_x4_aud_px4, RSVD1, SPI1, SPI2, DAP2, RSVD1, 0x3378, N, N, N), + PINGROUP(gpio_x5_aud_px5, RSVD1, SPI1, SPI2, RSVD4, RSVD1, 0x337c, N, N, N), + PINGROUP(gpio_x6_aud_px6, SPI6, SPI1, SPI2, RSVD4, RSVD4, 0x3380, N, N, N), + PINGROUP(gpio_x7_aud_px7, RSVD1, SPI1, SPI2, RSVD4, RSVD4, 0x3384, N, N, N), + PINGROUP(sdmmc3_clk_pa6, SDMMC3, RSVD2, RSVD3, SPI3, RSVD3, 0x3390, N, N, N), + PINGROUP(sdmmc3_cmd_pa7, SDMMC3, PWM3, UARTA, SPI3, SDMMC3, 0x3394, N, N, N), + PINGROUP(sdmmc3_dat0_pb7, SDMMC3, RSVD2, RSVD3, SPI3, RSVD3, 0x3398, N, N, N), + PINGROUP(sdmmc3_dat1_pb6, SDMMC3, PWM2, UARTA, SPI3, SDMMC3, 0x339c, N, N, N), + PINGROUP(sdmmc3_dat2_pb5, SDMMC3, PWM1, DISPLAYA, SPI3, SDMMC3, 0x33a0, N, N, N), + PINGROUP(sdmmc3_dat3_pb4, SDMMC3, PWM0, DISPLAYB, SPI3, SDMMC3, 0x33a4, N, N, N), + PINGROUP(hdmi_cec_pee3, CEC, SDMMC3, RSVD3, SOC, RSVD3, 0x33e0, Y, N, N), + PINGROUP(sdmmc1_wp_n_pv3, SDMMC1, CLK12, SPI4, UARTA, SDMMC1, 0x33e4, N, N, N), + PINGROUP(sdmmc3_cd_n_pv2, SDMMC3, OWR, RSVD3, RSVD4, RSVD4, 0x33e8, N, N, N), + PINGROUP(gpio_w2_aud_pw2, SPI6, RSVD2, SPI2, I2C1, RSVD2, 0x33ec, N, N, N), + PINGROUP(gpio_w3_aud_pw3, SPI6, SPI1, SPI2, I2C1, SPI6, 0x33f0, N, N, N), + PINGROUP(usb_vbus_en0_pn4, USB, RSVD2, RSVD3, RSVD4, RSVD4, 0x33f4, Y, N, N), + PINGROUP(usb_vbus_en1_pn5, USB, RSVD2, RSVD3, RSVD4, RSVD4, 0x33f8, Y, N, N), + PINGROUP(sdmmc3_clk_lb_in_pee5, SDMMC3, RSVD2, RSVD3, RSVD4, RSVD4, 0x33fc, N, N, N), + PINGROUP(sdmmc3_clk_lb_out_pee4, SDMMC3, RSVD2, RSVD3, RSVD4, RSVD4, 0x3400, N, N, N), + PINGROUP(reset_out_n, RSVD1, RSVD2, RSVD3, RESET_OUT_N, RSVD3, 0x3408, N, N, N), + + /* pg_name, r, hsm_b, schmitt_b, lpmd_b, drvdn_b, drvdn_w, drvup_b, drvup_w, slwr_b, slwr_w, slwf_b, slwf_w, drvtype */ + DRV_PINGROUP(ao1, 0x868, 2, 3, 4, 12, 5, 20, 5, 28, 2, 30, 2, N), + DRV_PINGROUP(ao2, 0x86c, 2, 3, 4, 12, 5, 20, 5, 28, 2, 30, 2, N), + DRV_PINGROUP(at1, 0x870, 2, 3, 4, 12, 7, 20, 7, 28, 2, 30, 2, Y), + DRV_PINGROUP(at2, 0x874, 2, 3, 4, 12, 7, 20, 7, 28, 2, 30, 2, Y), + DRV_PINGROUP(at3, 0x878, 2, 3, 4, 12, 7, 20, 7, 28, 2, 30, 2, Y), + DRV_PINGROUP(at4, 0x87c, 2, 3, 4, 12, 7, 20, 7, 28, 2, 30, 2, Y), + DRV_PINGROUP(at5, 0x880, 2, 3, 4, 14, 5, 19, 5, 28, 2, 30, 2, N), + DRV_PINGROUP(cdev1, 0x884, 2, 3, 4, 12, 5, 20, 5, 28, 2, 30, 2, N), + DRV_PINGROUP(cdev2, 0x888, 2, 3, 4, 12, 5, 20, 5, 28, 2, 30, 2, N), + DRV_PINGROUP(dap1, 0x890, 2, 3, 4, 12, 5, 20, 5, 28, 2, 30, 2, N), + DRV_PINGROUP(dap2, 0x894, 2, 3, 4, 12, 5, 20, 5, 28, 2, 30, 2, N), + DRV_PINGROUP(dap3, 0x898, 2, 3, 4, 12, 5, 20, 5, 28, 2, 30, 2, N), + DRV_PINGROUP(dap4, 0x89c, 2, 3, 4, 12, 5, 20, 5, 28, 2, 30, 2, N), + DRV_PINGROUP(dbg, 0x8a0, 2, 3, 4, 12, 5, 20, 5, 28, 2, 30, 2, N), + DRV_PINGROUP(sdio3, 0x8b0, 2, 3, -1, 12, 7, 20, 7, 28, 2, 30, 2, N), + DRV_PINGROUP(spi, 0x8b4, 2, 3, 4, 12, 5, 20, 5, 28, 2, 30, 2, N), + DRV_PINGROUP(uaa, 0x8b8, 2, 3, 4, 12, 5, 20, 5, 28, 2, 30, 2, N), + DRV_PINGROUP(uab, 0x8bc, 2, 3, 4, 12, 5, 20, 5, 28, 2, 30, 2, N), + DRV_PINGROUP(uart2, 0x8c0, 2, 3, 4, 12, 5, 20, 5, 28, 2, 30, 2, N), + DRV_PINGROUP(uart3, 0x8c4, 2, 3, 4, 12, 5, 20, 5, 28, 2, 30, 2, N), + DRV_PINGROUP(sdio1, 0x8ec, 2, 3, -1, 12, 7, 20, 7, 28, 2, 30, 2, N), + DRV_PINGROUP(ddc, 0x8fc, 2, 3, 4, 12, 5, 20, 5, 28, 2, 30, 2, N), + DRV_PINGROUP(gma, 0x900, 2, 3, 4, 14, 5, 20, 5, 28, 2, 30, 2, Y), + DRV_PINGROUP(gme, 0x910, 2, 3, 4, 14, 5, 19, 5, 28, 2, 30, 2, N), + DRV_PINGROUP(gmf, 0x914, 2, 3, 4, 14, 5, 19, 5, 28, 2, 30, 2, N), + DRV_PINGROUP(gmg, 0x918, 2, 3, 4, 14, 5, 19, 5, 28, 2, 30, 2, N), + DRV_PINGROUP(gmh, 0x91c, 2, 3, 4, 14, 5, 19, 5, 28, 2, 30, 2, N), + DRV_PINGROUP(owr, 0x920, 2, 3, 4, 12, 5, 20, 5, 28, 2, 30, 2, N), + DRV_PINGROUP(uda, 0x924, 2, 3, 4, 12, 5, 20, 5, 28, 2, 30, 2, N), +}; + +static const struct tegra_pinctrl_soc_data tegra114_pinctrl = { + .ngpios = NUM_GPIOS, + .pins = tegra114_pins, + .npins = ARRAY_SIZE(tegra114_pins), + .functions = tegra114_functions, + .nfunctions = ARRAY_SIZE(tegra114_functions), + .groups = tegra114_groups, + .ngroups = ARRAY_SIZE(tegra114_groups), +}; + +static int tegra114_pinctrl_probe(struct platform_device *pdev) +{ + return tegra_pinctrl_probe(pdev, &tegra114_pinctrl); +} + +static struct of_device_id tegra114_pinctrl_of_match[] = { + { .compatible = "nvidia,tegra114-pinmux", }, + { }, +}; +MODULE_DEVICE_TABLE(of, tegra114_pinctrl_of_match); + +static struct platform_driver tegra114_pinctrl_driver = { + .driver = { + .name = "tegra114-pinctrl", + .owner = THIS_MODULE, + .of_match_table = tegra114_pinctrl_of_match, + }, + .probe = tegra114_pinctrl_probe, + .remove = tegra_pinctrl_remove, +}; +module_platform_driver(tegra114_pinctrl_driver); + +MODULE_ALIAS("platform:tegra114-pinctrl"); +MODULE_AUTHOR("Pritesh Raithatha <praithatha@nvidia.com>"); +MODULE_DESCRIPTION("NVIDIA Tegra114 pincontrol driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/pinctrl/pinctrl-tegra20.c b/drivers/pinctrl/pinctrl-tegra20.c index e848189038f0..fcfb7d012c5b 100644 --- a/drivers/pinctrl/pinctrl-tegra20.c +++ b/drivers/pinctrl/pinctrl-tegra20.c @@ -2624,7 +2624,9 @@ static const struct tegra_function tegra20_functions[] = { .odrain_reg = -1, \ .lock_reg = -1, \ .ioreset_reg = -1, \ + .rcv_sel_reg = -1, \ .drv_reg = -1, \ + .drvtype_reg = -1, \ } /* Pin groups with only pull up and pull down control */ @@ -2642,7 +2644,9 @@ static const struct tegra_function tegra20_functions[] = { .odrain_reg = -1, \ .lock_reg = -1, \ .ioreset_reg = -1, \ + .rcv_sel_reg = -1, \ .drv_reg = -1, \ + .drvtype_reg = -1, \ } /* Pin groups for drive strength registers (configurable version) */ @@ -2660,6 +2664,7 @@ static const struct tegra_function tegra20_functions[] = { .odrain_reg = -1, \ .lock_reg = -1, \ .ioreset_reg = -1, \ + .rcv_sel_reg = -1, \ .drv_reg = ((r) - PINGROUP_REG_A), \ .drv_bank = 3, \ .hsm_bit = hsm_b, \ @@ -2673,6 +2678,7 @@ static const struct tegra_function tegra20_functions[] = { .slwr_width = slwr_w, \ .slwf_bit = slwf_b, \ .slwf_width = slwf_w, \ + .drvtype_reg = -1, \ } /* Pin groups for drive strength registers (simple version) */ diff --git a/drivers/pinctrl/pinctrl-tegra30.c b/drivers/pinctrl/pinctrl-tegra30.c index 9ad87ea735d4..2300deba25bd 100644 --- a/drivers/pinctrl/pinctrl-tegra30.c +++ b/drivers/pinctrl/pinctrl-tegra30.c @@ -3384,7 +3384,9 @@ static const struct tegra_function tegra30_functions[] = { .ioreset_reg = PINGROUP_REG_##ior(r), \ .ioreset_bank = 1, \ .ioreset_bit = 8, \ + .rcv_sel_reg = -1, \ .drv_reg = -1, \ + .drvtype_reg = -1, \ } #define DRV_PINGROUP(pg_name, r, hsm_b, schmitt_b, lpmd_b, \ @@ -3401,6 +3403,7 @@ static const struct tegra_function tegra30_functions[] = { .odrain_reg = -1, \ .lock_reg = -1, \ .ioreset_reg = -1, \ + .rcv_sel_reg = -1, \ .drv_reg = ((r) - DRV_PINGROUP_REG_A), \ .drv_bank = 0, \ .hsm_bit = hsm_b, \ @@ -3414,6 +3417,7 @@ static const struct tegra_function tegra30_functions[] = { .slwr_width = slwr_w, \ .slwf_bit = slwf_b, \ .slwf_width = slwf_w, \ + .drvtype_reg = -1, \ } static const struct tegra_pingroup tegra30_groups[] = { diff --git a/drivers/pinctrl/pinctrl-xway.c b/drivers/pinctrl/pinctrl-xway.c index 5f0eb04c2336..53cb6a3a56ed 100644 --- a/drivers/pinctrl/pinctrl-xway.c +++ b/drivers/pinctrl/pinctrl-xway.c @@ -441,17 +441,17 @@ static int xway_pinconf_get(struct pinctrl_dev *pctldev, if (port == PORT3) reg = GPIO3_OD; else - reg = GPIO_OD(port); + reg = GPIO_OD(pin); *config = LTQ_PINCONF_PACK(param, - !!gpio_getbit(info->membase[0], reg, PORT_PIN(port))); + !gpio_getbit(info->membase[0], reg, PORT_PIN(pin))); break; case LTQ_PINCONF_PARAM_PULL: if (port == PORT3) reg = GPIO3_PUDEN; else - reg = GPIO_PUDEN(port); - if (!gpio_getbit(info->membase[0], reg, PORT_PIN(port))) { + reg = GPIO_PUDEN(pin); + if (!gpio_getbit(info->membase[0], reg, PORT_PIN(pin))) { *config = LTQ_PINCONF_PACK(param, 0); break; } @@ -459,13 +459,18 @@ static int xway_pinconf_get(struct pinctrl_dev *pctldev, if (port == PORT3) reg = GPIO3_PUDSEL; else - reg = GPIO_PUDSEL(port); - if (!gpio_getbit(info->membase[0], reg, PORT_PIN(port))) + reg = GPIO_PUDSEL(pin); + if (!gpio_getbit(info->membase[0], reg, PORT_PIN(pin))) *config = LTQ_PINCONF_PACK(param, 2); else *config = LTQ_PINCONF_PACK(param, 1); break; + case LTQ_PINCONF_PARAM_OUTPUT: + reg = GPIO_DIR(pin); + *config = LTQ_PINCONF_PACK(param, + gpio_getbit(info->membase[0], reg, PORT_PIN(pin))); + break; default: dev_err(pctldev->dev, "Invalid config param %04x\n", param); return -ENOTSUPP; @@ -488,33 +493,44 @@ static int xway_pinconf_set(struct pinctrl_dev *pctldev, if (port == PORT3) reg = GPIO3_OD; else - reg = GPIO_OD(port); - gpio_setbit(info->membase[0], reg, PORT_PIN(port)); + reg = GPIO_OD(pin); + if (arg == 0) + gpio_setbit(info->membase[0], reg, PORT_PIN(pin)); + else + gpio_clearbit(info->membase[0], reg, PORT_PIN(pin)); break; case LTQ_PINCONF_PARAM_PULL: if (port == PORT3) reg = GPIO3_PUDEN; else - reg = GPIO_PUDEN(port); + reg = GPIO_PUDEN(pin); if (arg == 0) { - gpio_clearbit(info->membase[0], reg, PORT_PIN(port)); + gpio_clearbit(info->membase[0], reg, PORT_PIN(pin)); break; } - gpio_setbit(info->membase[0], reg, PORT_PIN(port)); + gpio_setbit(info->membase[0], reg, PORT_PIN(pin)); if (port == PORT3) reg = GPIO3_PUDSEL; else - reg = GPIO_PUDSEL(port); + reg = GPIO_PUDSEL(pin); if (arg == 1) - gpio_clearbit(info->membase[0], reg, PORT_PIN(port)); + gpio_clearbit(info->membase[0], reg, PORT_PIN(pin)); else if (arg == 2) - gpio_setbit(info->membase[0], reg, PORT_PIN(port)); + gpio_setbit(info->membase[0], reg, PORT_PIN(pin)); else dev_err(pctldev->dev, "Invalid pull value %d\n", arg); break; + case LTQ_PINCONF_PARAM_OUTPUT: + reg = GPIO_DIR(pin); + if (arg == 0) + gpio_clearbit(info->membase[0], reg, PORT_PIN(pin)); + else + gpio_setbit(info->membase[0], reg, PORT_PIN(pin)); + break; + default: dev_err(pctldev->dev, "Invalid config param %04x\n", param); return -ENOTSUPP; @@ -522,9 +538,24 @@ static int xway_pinconf_set(struct pinctrl_dev *pctldev, return 0; } +int xway_pinconf_group_set(struct pinctrl_dev *pctldev, + unsigned selector, + unsigned long config) +{ + struct ltq_pinmux_info *info = pinctrl_dev_get_drvdata(pctldev); + int i, ret = 0; + + for (i = 0; i < info->grps[selector].npins && !ret; i++) + ret = xway_pinconf_set(pctldev, + info->grps[selector].pins[i], config); + + return ret; +} + static struct pinconf_ops xway_pinconf_ops = { .pin_config_get = xway_pinconf_get, .pin_config_set = xway_pinconf_set, + .pin_config_group_set = xway_pinconf_group_set, }; static struct pinctrl_desc xway_pctrl_desc = { @@ -558,6 +589,7 @@ static inline int xway_mux_apply(struct pinctrl_dev *pctrldev, static const struct ltq_cfg_param xway_cfg_params[] = { {"lantiq,pull", LTQ_PINCONF_PARAM_PULL}, {"lantiq,open-drain", LTQ_PINCONF_PARAM_OPEN_DRAIN}, + {"lantiq,output", LTQ_PINCONF_PARAM_OUTPUT}, }; static struct ltq_pinmux_info xway_info = { diff --git a/include/linux/device.h b/include/linux/device.h index 43dcda937ddf..001f6637aa47 100644 --- a/include/linux/device.h +++ b/include/linux/device.h @@ -21,6 +21,7 @@ #include <linux/compiler.h> #include <linux/types.h> #include <linux/mutex.h> +#include <linux/pinctrl/devinfo.h> #include <linux/pm.h> #include <linux/atomic.h> #include <linux/ratelimit.h> @@ -620,6 +621,8 @@ struct acpi_dev_node { * @pm_domain: Provide callbacks that are executed during system suspend, * hibernation, system resume and during runtime PM transitions * along with subsystem-level and driver-level callbacks. + * @pins: For device pin management. + * See Documentation/pinctrl.txt for details. * @numa_node: NUMA node this device is close to. * @dma_mask: Dma mask (if dma'ble device). * @coherent_dma_mask: Like dma_mask, but for alloc_coherent mapping as not all @@ -672,6 +675,10 @@ struct device { struct dev_pm_info power; struct dev_pm_domain *pm_domain; +#ifdef CONFIG_PINCTRL + struct dev_pin_info *pins; +#endif + #ifdef CONFIG_NUMA int numa_node; /* NUMA node this device is close to */ #endif diff --git a/include/linux/mfd/abx500/ab8500-gpio.h b/include/linux/mfd/abx500/ab8500-gpio.h index 2387c207ea86..172b2f201ae0 100644 --- a/include/linux/mfd/abx500/ab8500-gpio.h +++ b/include/linux/mfd/abx500/ab8500-gpio.h @@ -14,10 +14,20 @@ * registers. */ -struct ab8500_gpio_platform_data { +struct abx500_gpio_platform_data { int gpio_base; - u32 irq_base; - u8 config_reg[8]; +}; + +enum abx500_gpio_pull_updown { + ABX500_GPIO_PULL_DOWN = 0x0, + ABX500_GPIO_PULL_NONE = 0x1, + ABX500_GPIO_PULL_UP = 0x3, +}; + +enum abx500_gpio_vinsel { + ABX500_GPIO_VINSEL_VBAT = 0x0, + ABX500_GPIO_VINSEL_VIN_1V8 = 0x1, + ABX500_GPIO_VINSEL_VDD_BIF = 0x2, }; #endif /* _AB8500_GPIO_H */ diff --git a/include/linux/mfd/abx500/ab8500.h b/include/linux/mfd/abx500/ab8500.h index 1cb5698b4d76..fc0534483c72 100644 --- a/include/linux/mfd/abx500/ab8500.h +++ b/include/linux/mfd/abx500/ab8500.h @@ -24,7 +24,7 @@ enum ab8500_version { AB8500_VERSION_AB8500 = 0x0, AB8500_VERSION_AB8505 = 0x1, AB8500_VERSION_AB9540 = 0x2, - AB8500_VERSION_AB8540 = 0x3, + AB8500_VERSION_AB8540 = 0x4, AB8500_VERSION_UNDEFINED, }; @@ -32,6 +32,7 @@ enum ab8500_version { #define AB8500_CUTEARLY 0x00 #define AB8500_CUT1P0 0x10 #define AB8500_CUT1P1 0x11 +#define AB8500_CUT1P2 0x12 /* Only valid for AB8540 */ #define AB8500_CUT2P0 0x20 #define AB8500_CUT3P0 0x30 #define AB8500_CUT3P3 0x33 @@ -39,6 +40,7 @@ enum ab8500_version { /* * AB8500 bank addresses */ +#define AB8500_M_FSM_RANK 0x0 #define AB8500_SYS_CTRL1_BLOCK 0x1 #define AB8500_SYS_CTRL2_BLOCK 0x2 #define AB8500_REGU_CTRL1 0x3 @@ -58,6 +60,7 @@ enum ab8500_version { #define AB8500_DEVELOPMENT 0x11 #define AB8500_DEBUG 0x12 #define AB8500_PROD_TEST 0x13 +#define AB8500_STE_TEST 0x14 #define AB8500_OTP_EMUL 0x15 /* @@ -65,11 +68,11 @@ enum ab8500_version { * Values used to index into array ab8500_irq_regoffset[] defined in * drivers/mdf/ab8500-core.c */ -/* Definitions for AB8500 and AB9540 */ +/* Definitions for AB8500, AB9540 and AB8540 */ /* ab8500_irq_regoffset[0] -> IT[Source|Latch|Mask]1 */ #define AB8500_INT_MAIN_EXT_CH_NOT_OK 0 /* not 8505/9540 */ -#define AB8500_INT_UN_PLUG_TV_DET 1 /* not 8505/9540 */ -#define AB8500_INT_PLUG_TV_DET 2 /* not 8505/9540 */ +#define AB8500_INT_UN_PLUG_TV_DET 1 /* not 8505/9540/8540 */ +#define AB8500_INT_PLUG_TV_DET 2 /* not 8505/9540/8540 */ #define AB8500_INT_TEMP_WARM 3 #define AB8500_INT_PON_KEY2DB_F 4 #define AB8500_INT_PON_KEY2DB_R 5 @@ -77,18 +80,19 @@ enum ab8500_version { #define AB8500_INT_PON_KEY1DB_R 7 /* ab8500_irq_regoffset[1] -> IT[Source|Latch|Mask]2 */ #define AB8500_INT_BATT_OVV 8 -#define AB8500_INT_MAIN_CH_UNPLUG_DET 10 /* not 8505 */ -#define AB8500_INT_MAIN_CH_PLUG_DET 11 /* not 8505 */ +#define AB8500_INT_MAIN_CH_UNPLUG_DET 10 /* not 8505/8540 */ +#define AB8500_INT_MAIN_CH_PLUG_DET 11 /* not 8505/8540 */ #define AB8500_INT_VBUS_DET_F 14 #define AB8500_INT_VBUS_DET_R 15 /* ab8500_irq_regoffset[2] -> IT[Source|Latch|Mask]3 */ #define AB8500_INT_VBUS_CH_DROP_END 16 #define AB8500_INT_RTC_60S 17 #define AB8500_INT_RTC_ALARM 18 +#define AB8540_INT_BIF_INT 19 #define AB8500_INT_BAT_CTRL_INDB 20 #define AB8500_INT_CH_WD_EXP 21 #define AB8500_INT_VBUS_OVV 22 -#define AB8500_INT_MAIN_CH_DROP_END 23 /* not 8505/9540 */ +#define AB8500_INT_MAIN_CH_DROP_END 23 /* not 8505/9540/8540 */ /* ab8500_irq_regoffset[3] -> IT[Source|Latch|Mask]4 */ #define AB8500_INT_CCN_CONV_ACC 24 #define AB8500_INT_INT_AUD 25 @@ -99,7 +103,7 @@ enum ab8500_version { #define AB8500_INT_BUP_CHG_NOT_OK 30 #define AB8500_INT_BUP_CHG_OK 31 /* ab8500_irq_regoffset[4] -> IT[Source|Latch|Mask]5 */ -#define AB8500_INT_GP_HW_ADC_CONV_END 32 /* not 8505 */ +#define AB8500_INT_GP_HW_ADC_CONV_END 32 /* not 8505/8540 */ #define AB8500_INT_ACC_DETECT_1DB_F 33 #define AB8500_INT_ACC_DETECT_1DB_R 34 #define AB8500_INT_ACC_DETECT_22DB_F 35 @@ -108,23 +112,23 @@ enum ab8500_version { #define AB8500_INT_ACC_DETECT_21DB_R 38 #define AB8500_INT_GP_SW_ADC_CONV_END 39 /* ab8500_irq_regoffset[5] -> IT[Source|Latch|Mask]7 */ -#define AB8500_INT_GPIO6R 40 /* not 8505/9540 */ -#define AB8500_INT_GPIO7R 41 /* not 8505/9540 */ -#define AB8500_INT_GPIO8R 42 /* not 8505/9540 */ -#define AB8500_INT_GPIO9R 43 /* not 8505/9540 */ -#define AB8500_INT_GPIO10R 44 -#define AB8500_INT_GPIO11R 45 -#define AB8500_INT_GPIO12R 46 /* not 8505 */ -#define AB8500_INT_GPIO13R 47 +#define AB8500_INT_GPIO6R 40 /* not 8505/9540/8540 */ +#define AB8500_INT_GPIO7R 41 /* not 8505/9540/8540 */ +#define AB8500_INT_GPIO8R 42 /* not 8505/9540/8540 */ +#define AB8500_INT_GPIO9R 43 /* not 8505/9540/8540 */ +#define AB8500_INT_GPIO10R 44 /* not 8540 */ +#define AB8500_INT_GPIO11R 45 /* not 8540 */ +#define AB8500_INT_GPIO12R 46 /* not 8505/8540 */ +#define AB8500_INT_GPIO13R 47 /* not 8540 */ /* ab8500_irq_regoffset[6] -> IT[Source|Latch|Mask]8 */ -#define AB8500_INT_GPIO24R 48 /* not 8505 */ -#define AB8500_INT_GPIO25R 49 /* not 8505 */ -#define AB8500_INT_GPIO36R 50 /* not 8505/9540 */ -#define AB8500_INT_GPIO37R 51 /* not 8505/9540 */ -#define AB8500_INT_GPIO38R 52 /* not 8505/9540 */ -#define AB8500_INT_GPIO39R 53 /* not 8505/9540 */ -#define AB8500_INT_GPIO40R 54 -#define AB8500_INT_GPIO41R 55 +#define AB8500_INT_GPIO24R 48 /* not 8505/8540 */ +#define AB8500_INT_GPIO25R 49 /* not 8505/8540 */ +#define AB8500_INT_GPIO36R 50 /* not 8505/9540/8540 */ +#define AB8500_INT_GPIO37R 51 /* not 8505/9540/8540 */ +#define AB8500_INT_GPIO38R 52 /* not 8505/9540/8540 */ +#define AB8500_INT_GPIO39R 53 /* not 8505/9540/8540 */ +#define AB8500_INT_GPIO40R 54 /* not 8540 */ +#define AB8500_INT_GPIO41R 55 /* not 8540 */ /* ab8500_irq_regoffset[7] -> IT[Source|Latch|Mask]9 */ #define AB8500_INT_GPIO6F 56 /* not 8505/9540 */ #define AB8500_INT_GPIO7F 57 /* not 8505/9540 */ @@ -135,14 +139,14 @@ enum ab8500_version { #define AB8500_INT_GPIO12F 62 /* not 8505 */ #define AB8500_INT_GPIO13F 63 /* ab8500_irq_regoffset[8] -> IT[Source|Latch|Mask]10 */ -#define AB8500_INT_GPIO24F 64 /* not 8505 */ -#define AB8500_INT_GPIO25F 65 /* not 8505 */ -#define AB8500_INT_GPIO36F 66 /* not 8505/9540 */ -#define AB8500_INT_GPIO37F 67 /* not 8505/9540 */ -#define AB8500_INT_GPIO38F 68 /* not 8505/9540 */ -#define AB8500_INT_GPIO39F 69 /* not 8505/9540 */ -#define AB8500_INT_GPIO40F 70 -#define AB8500_INT_GPIO41F 71 +#define AB8500_INT_GPIO24F 64 /* not 8505/8540 */ +#define AB8500_INT_GPIO25F 65 /* not 8505/8540 */ +#define AB8500_INT_GPIO36F 66 /* not 8505/9540/8540 */ +#define AB8500_INT_GPIO37F 67 /* not 8505/9540/8540 */ +#define AB8500_INT_GPIO38F 68 /* not 8505/9540/8540 */ +#define AB8500_INT_GPIO39F 69 /* not 8505/9540/8540 */ +#define AB8500_INT_GPIO40F 70 /* not 8540 */ +#define AB8500_INT_GPIO41F 71 /* not 8540 */ /* ab8500_irq_regoffset[9] -> IT[Source|Latch|Mask]12 */ #define AB8500_INT_ADP_SOURCE_ERROR 72 #define AB8500_INT_ADP_SINK_ERROR 73 @@ -160,42 +164,44 @@ enum ab8500_version { #define AB8500_INT_SRP_DETECT 88 #define AB8500_INT_USB_CHARGER_NOT_OKR 89 #define AB8500_INT_ID_WAKEUP_R 90 +#define AB8500_INT_ID_DET_PLUGR 91 /* 8505/9540 cut2.0 */ #define AB8500_INT_ID_DET_R1R 92 #define AB8500_INT_ID_DET_R2R 93 #define AB8500_INT_ID_DET_R3R 94 #define AB8500_INT_ID_DET_R4R 95 /* ab8500_irq_regoffset[12] -> IT[Source|Latch|Mask]21 */ -#define AB8500_INT_ID_WAKEUP_F 96 -#define AB8500_INT_ID_DET_R1F 98 -#define AB8500_INT_ID_DET_R2F 99 -#define AB8500_INT_ID_DET_R3F 100 -#define AB8500_INT_ID_DET_R4F 101 -#define AB8500_INT_CHAUTORESTARTAFTSEC 102 +#define AB8500_INT_ID_WAKEUP_F 96 /* not 8505/9540 */ +#define AB8500_INT_ID_DET_PLUGF 97 /* 8505/9540 cut2.0 */ +#define AB8500_INT_ID_DET_R1F 98 /* not 8505/9540 */ +#define AB8500_INT_ID_DET_R2F 99 /* not 8505/9540 */ +#define AB8500_INT_ID_DET_R3F 100 /* not 8505/9540 */ +#define AB8500_INT_ID_DET_R4F 101 /* not 8505/9540 */ +#define AB8500_INT_CHAUTORESTARTAFTSEC 102 /* not 8505/9540 */ #define AB8500_INT_CHSTOPBYSEC 103 /* ab8500_irq_regoffset[13] -> IT[Source|Latch|Mask]22 */ #define AB8500_INT_USB_CH_TH_PROT_F 104 -#define AB8500_INT_USB_CH_TH_PROT_R 105 +#define AB8500_INT_USB_CH_TH_PROT_R 105 #define AB8500_INT_MAIN_CH_TH_PROT_F 106 /* not 8505/9540 */ #define AB8500_INT_MAIN_CH_TH_PROT_R 107 /* not 8505/9540 */ #define AB8500_INT_CHCURLIMNOHSCHIRP 109 #define AB8500_INT_CHCURLIMHSCHIRP 110 #define AB8500_INT_XTAL32K_KO 111 -/* Definitions for AB9540 */ +/* Definitions for AB9540 / AB8505 */ /* ab8500_irq_regoffset[14] -> IT[Source|Latch|Mask]13 */ -#define AB9540_INT_GPIO50R 113 -#define AB9540_INT_GPIO51R 114 /* not 8505 */ -#define AB9540_INT_GPIO52R 115 -#define AB9540_INT_GPIO53R 116 -#define AB9540_INT_GPIO54R 117 /* not 8505 */ +#define AB9540_INT_GPIO50R 113 /* not 8540 */ +#define AB9540_INT_GPIO51R 114 /* not 8505/8540 */ +#define AB9540_INT_GPIO52R 115 /* not 8540 */ +#define AB9540_INT_GPIO53R 116 /* not 8540 */ +#define AB9540_INT_GPIO54R 117 /* not 8505/8540 */ #define AB9540_INT_IEXT_CH_RF_BFN_R 118 -#define AB9540_INT_IEXT_CH_RF_BFN_F 119 /* ab8500_irq_regoffset[15] -> IT[Source|Latch|Mask]14 */ -#define AB9540_INT_GPIO50F 121 -#define AB9540_INT_GPIO51F 122 /* not 8505 */ -#define AB9540_INT_GPIO52F 123 -#define AB9540_INT_GPIO53F 124 -#define AB9540_INT_GPIO54F 125 /* not 8505 */ +#define AB9540_INT_GPIO50F 121 /* not 8540 */ +#define AB9540_INT_GPIO51F 122 /* not 8505/8540 */ +#define AB9540_INT_GPIO52F 123 /* not 8540 */ +#define AB9540_INT_GPIO53F 124 /* not 8540 */ +#define AB9540_INT_GPIO54F 125 /* not 8505/8540 */ +#define AB9540_INT_IEXT_CH_RF_BFN_F 126 /* ab8500_irq_regoffset[16] -> IT[Source|Latch|Mask]25 */ #define AB8505_INT_KEYSTUCK 128 #define AB8505_INT_IKR 129 @@ -204,6 +210,87 @@ enum ab8500_version { #define AB8505_INT_KEYDEGLITCH 132 #define AB8505_INT_MODPWRSTATUSF 134 #define AB8505_INT_MODPWRSTATUSR 135 +/* ab8500_irq_regoffset[17] -> IT[Source|Latch|Mask]6 */ +#define AB8500_INT_HOOK_DET_NEG_F 138 +#define AB8500_INT_HOOK_DET_NEG_R 139 +#define AB8500_INT_HOOK_DET_POS_F 140 +#define AB8500_INT_HOOK_DET_POS_R 141 +#define AB8500_INT_PLUG_DET_COMP_F 142 +#define AB8500_INT_PLUG_DET_COMP_R 143 +/* ab8500_irq_regoffset[18] -> IT[Source|Latch|Mask]23 */ +#define AB8505_INT_COLL 144 +#define AB8505_INT_RESERR 145 +#define AB8505_INT_FRAERR 146 +#define AB8505_INT_COMERR 147 +#define AB8505_INT_SPDSET 148 +#define AB8505_INT_DSENT 149 +#define AB8505_INT_DREC 150 +#define AB8505_INT_ACC_INT 151 +/* ab8500_irq_regoffset[19] -> IT[Source|Latch|Mask]24 */ +#define AB8505_INT_NOPINT 152 +/* ab8540_irq_regoffset[20] -> IT[Source|Latch|Mask]26 */ +#define AB8540_INT_IDPLUGDETCOMPF 160 +#define AB8540_INT_IDPLUGDETCOMPR 161 +#define AB8540_INT_FMDETCOMPLOF 162 +#define AB8540_INT_FMDETCOMPLOR 163 +#define AB8540_INT_FMDETCOMPHIF 164 +#define AB8540_INT_FMDETCOMPHIR 165 +#define AB8540_INT_ID5VDETCOMPF 166 +#define AB8540_INT_ID5VDETCOMPR 167 +/* ab8540_irq_regoffset[21] -> IT[Source|Latch|Mask]27 */ +#define AB8540_INT_GPIO43F 168 +#define AB8540_INT_GPIO43R 169 +#define AB8540_INT_GPIO44F 170 +#define AB8540_INT_GPIO44R 171 +#define AB8540_INT_KEYPOSDETCOMPF 172 +#define AB8540_INT_KEYPOSDETCOMPR 173 +#define AB8540_INT_KEYNEGDETCOMPF 174 +#define AB8540_INT_KEYNEGDETCOMPR 175 +/* ab8540_irq_regoffset[22] -> IT[Source|Latch|Mask]28 */ +#define AB8540_INT_GPIO1VBATF 176 +#define AB8540_INT_GPIO1VBATR 177 +#define AB8540_INT_GPIO2VBATF 178 +#define AB8540_INT_GPIO2VBATR 179 +#define AB8540_INT_GPIO3VBATF 180 +#define AB8540_INT_GPIO3VBATR 181 +#define AB8540_INT_GPIO4VBATF 182 +#define AB8540_INT_GPIO4VBATR 183 +/* ab8540_irq_regoffset[23] -> IT[Source|Latch|Mask]29 */ +#define AB8540_INT_SYSCLKREQ2F 184 +#define AB8540_INT_SYSCLKREQ2R 185 +#define AB8540_INT_SYSCLKREQ3F 186 +#define AB8540_INT_SYSCLKREQ3R 187 +#define AB8540_INT_SYSCLKREQ4F 188 +#define AB8540_INT_SYSCLKREQ4R 189 +#define AB8540_INT_SYSCLKREQ5F 190 +#define AB8540_INT_SYSCLKREQ5R 191 +/* ab8540_irq_regoffset[24] -> IT[Source|Latch|Mask]30 */ +#define AB8540_INT_PWMOUT1F 192 +#define AB8540_INT_PWMOUT1R 193 +#define AB8540_INT_PWMCTRL0F 194 +#define AB8540_INT_PWMCTRL0R 195 +#define AB8540_INT_PWMCTRL1F 196 +#define AB8540_INT_PWMCTRL1R 197 +#define AB8540_INT_SYSCLKREQ6F 198 +#define AB8540_INT_SYSCLKREQ6R 199 +/* ab8540_irq_regoffset[25] -> IT[Source|Latch|Mask]31 */ +#define AB8540_INT_PWMEXTVIBRA1F 200 +#define AB8540_INT_PWMEXTVIBRA1R 201 +#define AB8540_INT_PWMEXTVIBRA2F 202 +#define AB8540_INT_PWMEXTVIBRA2R 203 +#define AB8540_INT_PWMOUT2F 204 +#define AB8540_INT_PWMOUT2R 205 +#define AB8540_INT_PWMOUT3F 206 +#define AB8540_INT_PWMOUT3R 207 +/* ab8540_irq_regoffset[26] -> IT[Source|Latch|Mask]32 */ +#define AB8540_INT_ADDATA2F 208 +#define AB8540_INT_ADDATA2R 209 +#define AB8540_INT_DADATA2F 210 +#define AB8540_INT_DADATA2R 211 +#define AB8540_INT_FSYNC2F 212 +#define AB8540_INT_FSYNC2R 213 +#define AB8540_INT_BITCLK2F 214 +#define AB8540_INT_BITCLK2R 215 /* * AB8500_AB9540_NR_IRQS is used when configuring the IRQ numbers for the @@ -213,13 +300,24 @@ enum ab8500_version { * which is larger. */ #define AB8500_NR_IRQS 112 -#define AB8505_NR_IRQS 136 -#define AB9540_NR_IRQS 136 +#define AB8505_NR_IRQS 153 +#define AB9540_NR_IRQS 153 +#define AB8540_NR_IRQS 216 /* This is set to the roof of any AB8500 chip variant IRQ counts */ -#define AB8500_MAX_NR_IRQS AB9540_NR_IRQS +#define AB8500_MAX_NR_IRQS AB8540_NR_IRQS #define AB8500_NUM_IRQ_REGS 14 -#define AB9540_NUM_IRQ_REGS 17 +#define AB9540_NUM_IRQ_REGS 20 +#define AB8540_NUM_IRQ_REGS 27 + +/* Turn On Status Event */ +#define AB8500_POR_ON_VBAT 0x01 +#define AB8500_POW_KEY_1_ON 0x02 +#define AB8500_POW_KEY_2_ON 0x04 +#define AB8500_RTC_ALARM 0x08 +#define AB8500_MAIN_CH_DET 0x10 +#define AB8500_VBUS_DET 0x20 +#define AB8500_USB_ID_DET 0x40 /** * struct ab8500 - ab8500 internal structure @@ -287,7 +385,7 @@ struct ab8500_platform_data { struct ab8500_regulator_reg_init *regulator_reg_init; int num_regulator; struct regulator_init_data *regulator; - struct ab8500_gpio_platform_data *gpio; + struct abx500_gpio_platform_data *gpio; struct ab8500_codec_platform_data *codec; }; @@ -335,10 +433,79 @@ static inline int is_ab8500_2p0_or_earlier(struct ab8500 *ab) return (is_ab8500(ab) && (ab->chip_id <= AB8500_CUT2P0)); } +static inline int is_ab8500_3p3_or_earlier(struct ab8500 *ab) +{ + return (is_ab8500(ab) && (ab->chip_id <= AB8500_CUT3P3)); +} + /* exclude also ab8505, ab9540... */ static inline int is_ab8500_2p0(struct ab8500 *ab) { return (is_ab8500(ab) && (ab->chip_id == AB8500_CUT2P0)); } +static inline int is_ab8505_1p0_or_earlier(struct ab8500 *ab) +{ + return (is_ab8505(ab) && (ab->chip_id <= AB8500_CUT1P0)); +} + +static inline int is_ab8505_2p0(struct ab8500 *ab) +{ + return (is_ab8505(ab) && (ab->chip_id == AB8500_CUT2P0)); +} + +static inline int is_ab9540_1p0_or_earlier(struct ab8500 *ab) +{ + return (is_ab9540(ab) && (ab->chip_id <= AB8500_CUT1P0)); +} + +static inline int is_ab9540_2p0(struct ab8500 *ab) +{ + return (is_ab9540(ab) && (ab->chip_id == AB8500_CUT2P0)); +} + +/* + * Be careful, the marketing name for this chip is 2.1 + * but the value read from the chip is 3.0 (0x30) + */ +static inline int is_ab9540_3p0(struct ab8500 *ab) +{ + return (is_ab9540(ab) && (ab->chip_id == AB8500_CUT3P0)); +} + +static inline int is_ab8540_1p0_or_earlier(struct ab8500 *ab) +{ + return is_ab8540(ab) && (ab->chip_id <= AB8500_CUT1P0); +} + +static inline int is_ab8540_1p1_or_earlier(struct ab8500 *ab) +{ + return is_ab8540(ab) && (ab->chip_id <= AB8500_CUT1P1); +} + +static inline int is_ab8540_1p2_or_earlier(struct ab8500 *ab) +{ + return is_ab8540(ab) && (ab->chip_id <= AB8500_CUT1P2); +} + +static inline int is_ab8540_2p0_or_earlier(struct ab8500 *ab) +{ + return is_ab8540(ab) && (ab->chip_id <= AB8500_CUT2P0); +} + +static inline int is_ab8540_2p0(struct ab8500 *ab) +{ + return is_ab8540(ab) && (ab->chip_id == AB8500_CUT2P0); +} + +static inline int is_ab8505_2p0_earlier(struct ab8500 *ab) +{ + return (is_ab8505(ab) && (ab->chip_id < AB8500_CUT2P0)); +} + +static inline int is_ab9540_2p0_or_earlier(struct ab8500 *ab) +{ + return (is_ab9540(ab) && (ab->chip_id < AB8500_CUT2P0)); +} + #endif /* MFD_AB8500_H */ diff --git a/include/linux/pinctrl/devinfo.h b/include/linux/pinctrl/devinfo.h new file mode 100644 index 000000000000..6e5f8a985ea7 --- /dev/null +++ b/include/linux/pinctrl/devinfo.h @@ -0,0 +1,45 @@ +/* + * Per-device information from the pin control system. + * This is the stuff that get included into the device + * core. + * + * Copyright (C) 2012 ST-Ericsson SA + * Written on behalf of Linaro for ST-Ericsson + * This interface is used in the core to keep track of pins. + * + * Author: Linus Walleij <linus.walleij@linaro.org> + * + * License terms: GNU General Public License (GPL) version 2 + */ + +#ifndef PINCTRL_DEVINFO_H +#define PINCTRL_DEVINFO_H + +#ifdef CONFIG_PINCTRL + +/* The device core acts as a consumer toward pinctrl */ +#include <linux/pinctrl/consumer.h> + +/** + * struct dev_pin_info - pin state container for devices + * @p: pinctrl handle for the containing device + * @default_state: the default state for the handle, if found + */ +struct dev_pin_info { + struct pinctrl *p; + struct pinctrl_state *default_state; +}; + +extern int pinctrl_bind_pins(struct device *dev); + +#else + +/* Stubs if we're not using pinctrl */ + +static inline int pinctrl_bind_pins(struct device *dev) +{ + return 0; +} + +#endif /* CONFIG_PINCTRL */ +#endif /* PINCTRL_DEVINFO_H */ diff --git a/include/linux/pinctrl/pinconf-generic.h b/include/linux/pinctrl/pinconf-generic.h index 47a1bdd88878..72474e18f1e0 100644 --- a/include/linux/pinctrl/pinconf-generic.h +++ b/include/linux/pinctrl/pinconf-generic.h @@ -46,7 +46,11 @@ * @PIN_CONFIG_DRIVE_OPEN_SOURCE: the pin will be driven with open source * (open emitter). Sending this config will enabale open drain mode, the * argument is ignored. - * @PIN_CONFIG_INPUT_SCHMITT_DISABLE: disable schmitt-trigger mode on the pin. + * @PIN_CONFIG_DRIVE_STRENGTH: the pin will output the current passed as + * argument. The argument is in mA. + * @PIN_CONFIG_INPUT_SCHMITT_ENABLE: control schmitt-trigger mode on the pin. + * If the argument != 0, schmitt-trigger mode is enabled. If it's 0, + * schmitt-trigger mode is disabled. * @PIN_CONFIG_INPUT_SCHMITT: this will configure an input pin to run in * schmitt-trigger mode. If the schmitt-trigger has adjustable hysteresis, * the threshold value is given on a custom format as argument when @@ -58,10 +62,15 @@ * @PIN_CONFIG_POWER_SOURCE: if the pin can select between different power * supplies, the argument to this parameter (on a custom format) tells * the driver which alternative power source to use. + * @PIN_CONFIG_SLEW_RATE: if the pin can select slew rate, the argument to + * this parameter (on a custom format) tells the driver which alternative + * slew rate to use. * @PIN_CONFIG_LOW_POWER_MODE: this will configure the pin for low power * operation, if several modes of operation are supported these can be * passed in the argument on a custom form, else just use argument 1 * to indicate low power mode, argument 0 turns low power mode off. + * @PIN_CONFIG_OUTPUT: this will configure the pin in output, use argument + * 1 to indicate high level, argument 0 to indicate low level. * @PIN_CONFIG_END: this is the last enumerator for pin configurations, if * you need to pass in custom configurations to the pin controller, use * PIN_CONFIG_END+1 as the base offset. @@ -74,11 +83,14 @@ enum pin_config_param { PIN_CONFIG_DRIVE_PUSH_PULL, PIN_CONFIG_DRIVE_OPEN_DRAIN, PIN_CONFIG_DRIVE_OPEN_SOURCE, - PIN_CONFIG_INPUT_SCHMITT_DISABLE, + PIN_CONFIG_DRIVE_STRENGTH, + PIN_CONFIG_INPUT_SCHMITT_ENABLE, PIN_CONFIG_INPUT_SCHMITT, PIN_CONFIG_INPUT_DEBOUNCE, PIN_CONFIG_POWER_SOURCE, + PIN_CONFIG_SLEW_RATE, PIN_CONFIG_LOW_POWER_MODE, + PIN_CONFIG_OUTPUT, PIN_CONFIG_END = 0x7FFF, }; diff --git a/include/linux/pinctrl/pinctrl.h b/include/linux/pinctrl/pinctrl.h index 04d6700d99af..778804df293f 100644 --- a/include/linux/pinctrl/pinctrl.h +++ b/include/linux/pinctrl/pinctrl.h @@ -154,6 +154,7 @@ struct pinctrl_dev *of_pinctrl_get(struct device_node *np) #endif /* CONFIG_OF */ extern const char *pinctrl_dev_get_name(struct pinctrl_dev *pctldev); +extern const char *pinctrl_dev_get_devname(struct pinctrl_dev *pctldev); extern void *pinctrl_dev_get_drvdata(struct pinctrl_dev *pctldev); #else |